diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2022-10-08 08:56:37 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2022-10-08 08:56:37 -0700 |
| commit | a09476668e3016ea4a7b0a7ebd02f44e0546c12c (patch) | |
| tree | 0a2e435d40b1785bc3df0c455fbf858adc28d36c | |
| parent | e8bc52cb8df80c31c73c726ab58ea9746e9ff734 (diff) | |
| parent | 7cd04013fbf3e6dcb67ca6b59aa813269a2ad9ce (diff) | |
Merge tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and
features, the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
w1: Split memcpy() of struct cn_msg flexible array
spmi: pmic-arb: increase SPMI transaction timeout delay
spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
spmi: pmic-arb: check apid against limits before calling irq handler
spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
spmi: pmic-arb: handle spurious interrupt
spmi: pmic-arb: add a print in cleanup_irq
drivers: spmi: Directly use ida_alloc()/free()
MAINTAINERS: add TI ECAP driver info
counter: ti-ecap-capture: capture driver support for ECAP
Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
dt-bindings: counter: add ti,am62-ecap-capture.yaml
counter: Introduce the COUNTER_COMP_ARRAY component type
counter: Consolidate Counter extension sysfs attribute creation
counter: Introduce the Count capture component
counter: 104-quad-8: Add Signal polarity component
counter: Introduce the Signal polarity component
counter: interrupt-cnt: Implement watch_validate callback
...
411 files changed, 18105 insertions, 3573 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x index 8e53a32f8150..08b1964f27d3 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x @@ -516,3 +516,11 @@ Contact: Mathieu Poirier <mathieu.poirier@linaro.org> Description: (Read) Returns the number of special conditional P1 right-hand keys that the trace unit can use (0x194). The value is taken directly from the HW. + +What: /sys/bus/coresight/devices/etm<N>/ts_source +Date: October 2022 +KernelVersion: 6.1 +Contact: Mathieu Poirier <mathieu.poirier@linaro.org> or Suzuki K Poulose <suzuki.poulose@arm.com> +Description: (Read) When FEAT_TRF is implemented, value of TRFCR_ELx.TS used for + trace session. Otherwise -1 indicates an unknown time source. Check + trcidr0.tssize to see if a global timestamp is available. diff --git a/Documentation/ABI/testing/sysfs-bus-counter b/Documentation/ABI/testing/sysfs-bus-counter index 06c2b3e27e0b..ff83320b4255 100644 --- a/Documentation/ABI/testing/sysfs-bus-counter +++ b/Documentation/ABI/testing/sysfs-bus-counter @@ -4,6 +4,12 @@ Contact: linux-iio@vger.kernel.org Description: Count data of Count Y represented as a string. +What: /sys/bus/counter/devices/counterX/countY/capture +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Historical capture of the Count Y count data. + What: /sys/bus/counter/devices/counterX/countY/ceiling KernelVersion: 5.2 Contact: linux-iio@vger.kernel.org @@ -203,6 +209,13 @@ Description: both edges: Any state transition. +What: /sys/bus/counter/devices/counterX/countY/num_overflows +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + This attribute indicates the number of overflows of count Y. + +What: /sys/bus/counter/devices/counterX/countY/capture_component_id What: /sys/bus/counter/devices/counterX/countY/ceiling_component_id What: /sys/bus/counter/devices/counterX/countY/floor_component_id What: /sys/bus/counter/devices/counterX/countY/count_mode_component_id @@ -213,11 +226,14 @@ What: /sys/bus/counter/devices/counterX/countY/prescaler_component_id What: /sys/bus/counter/devices/counterX/countY/preset_component_id What: /sys/bus/counter/devices/counterX/countY/preset_enable_component_id What: /sys/bus/counter/devices/counterX/countY/signalZ_action_component_id +What: /sys/bus/counter/devices/counterX/countY/num_overflows_component_id What: /sys/bus/counter/devices/counterX/signalY/cable_fault_component_id What: /sys/bus/counter/devices/counterX/signalY/cable_fault_enable_component_id What: /sys/bus/counter/devices/counterX/signalY/filter_clock_prescaler_component_id What: /sys/bus/counter/devices/counterX/signalY/index_polarity_component_id +What: /sys/bus/counter/devices/counterX/signalY/polarity_component_id What: /sys/bus/counter/devices/counterX/signalY/synchronous_mode_component_id +What: /sys/bus/counter/devices/counterX/signalY/frequency_component_id KernelVersion: 5.16 Contact: linux-iio@vger.kernel.org Description: @@ -303,6 +319,19 @@ Description: Discrete set of available values for the respective Signal Y configuration are listed in this file. +What: /sys/bus/counter/devices/counterX/signalY/polarity +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Active level of Signal Y. The following polarity values are + available: + + positive: + Signal high state considered active level (rising edge). + + negative: + Signal low state considered active level (falling edge). + What: /sys/bus/counter/devices/counterX/signalY/name KernelVersion: 5.2 Contact: linux-iio@vger.kernel.org @@ -345,3 +374,9 @@ Description: via index_polarity. The index function (as enabled via preset_enable) is performed synchronously with the quadrature clock on the active level of the index input. + +What: /sys/bus/counter/devices/counterX/signalY/frequency +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Read-only attribute that indicates the signal Y frequency, in Hz. diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index e81ba6f5e1c8..6ba34c0d9789 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -196,7 +196,7 @@ Description: Raw capacitance measurement from channel Y. Units after application of scale and offset are nanofarads. -What: /sys/.../iio:deviceX/in_capacitanceY-in_capacitanceZ_raw +What: /sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_raw KernelVersion: 3.2 Contact: linux-iio@vger.kernel.org Description: @@ -207,6 +207,25 @@ Description: is required is a consistent labeling. Units after application of scale and offset are nanofarads. +What: /sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_zeropoint +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + For differential channels, this an offset that is applied + equally to both inputs. As the reading is of the difference + between the two inputs, this should not be applied to the _raw + reading by userspace (unlike _offset) and unlike calibbias + it does not affect the differential value measured because + the effect of _zeropoint cancels out across the two inputs + that make up the differential pair. It's purpose is to bring + the individual signals, before the differential is measured, + within the measurement range of the device. The naming is + chosen because if the separate inputs that make the + differential pair are drawn on a graph in their + _raw units, this is the value that the zero point on the + measurement axis represents. It is expressed with the + same scaling as _raw. + What: /sys/bus/iio/devices/iio:deviceX/in_temp_raw What: /sys/bus/iio/devices/iio:deviceX/in_tempX_raw What: /sys/bus/iio/devices/iio:deviceX/in_temp_x_raw @@ -241,6 +260,15 @@ Description: Has all of the equivalent parameters as per voltageY. Units after application of scale and offset are m/s^2. +What: /sys/bus/iio/devices/iio:deviceX/in_accel_linear_x_raw +What: /sys/bus/iio/devices/iio:deviceX/in_accel_linear_y_raw +What: /sys/bus/iio/devices/iio:deviceX/in_accel_linear_z_raw +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + As per in_accel_X_raw attributes, but minus the + acceleration due to gravity. + What: /sys/bus/iio/devices/iio:deviceX/in_gravity_x_raw What: /sys/bus/iio/devices/iio:deviceX/in_gravity_y_raw What: /sys/bus/iio/devices/iio:deviceX/in_gravity_z_raw @@ -2038,3 +2066,99 @@ Description: Available range for the forced calibration value, expressed as: - a range specified as "[min step max]" + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageX_sampling_frequency +What: /sys/bus/iio/devices/iio:deviceX/in_powerY_sampling_frequency +What: /sys/bus/iio/devices/iio:deviceX/in_currentZ_sampling_frequency +KernelVersion: 5.20 +Contact: linux-iio@vger.kernel.org +Description: + Some devices have separate controls of sampling frequency for + individual channels. If multiple channels are enabled in a scan, + then the sampling_frequency of the scan may be computed from the + per channel sampling frequencies. + +What: /sys/.../events/in_accel_gesture_singletap_en +What: /sys/.../events/in_accel_gesture_doubletap_en +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Device generates an event on a single or double tap. + +What: /sys/.../events/in_accel_gesture_singletap_value +What: /sys/.../events/in_accel_gesture_doubletap_value +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Specifies the threshold value that the device is comparing + against to generate the tap gesture event. The lower + threshold value increases the sensitivity of tap detection. + Units and the exact meaning of value are device-specific. + +What: /sys/.../events/in_accel_gesture_tap_value_available +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Lists all available threshold values which can be used to + modify the sensitivity of the tap detection. + +What: /sys/.../events/in_accel_gesture_singletap_reset_timeout +What: /sys/.../events/in_accel_gesture_doubletap_reset_timeout +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Specifies the timeout value in seconds for the tap detector + to not to look for another tap event after the event as + occurred. Basically the minimum quiet time between the two + single-tap's or two double-tap's. + +What: /sys/.../events/in_accel_gesture_tap_reset_timeout_available +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Lists all available tap reset timeout values. Units in seconds. + +What: /sys/.../events/in_accel_gesture_doubletap_tap2_min_delay +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Specifies the minimum quiet time in seconds between the two + taps of a double tap. + +What: /sys/.../events/in_accel_gesture_doubletap_tap2_min_delay_available +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Lists all available delay values between two taps in the double + tap. Units in seconds. + +What: /sys/.../events/in_accel_gesture_tap_maxtomin_time +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Specifies the maximum time difference allowed between upper + and lower peak of tap to consider it as the valid tap event. + Units in seconds. + +What: /sys/.../events/in_accel_gesture_tap_maxtomin_time_available +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Lists all available time values between upper peak to lower + peak. Units in seconds. + +What: /sys/bus/iio/devices/iio:deviceX/in_rot_yaw_raw +What: /sys/bus/iio/devices/iio:deviceX/in_rot_pitch_raw +What: /sys/bus/iio/devices/iio:deviceX/in_rot_roll_raw +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Raw (unscaled) euler angles readings. Units after + application of scale are deg. + +What: /sys/bus/iio/devices/iio:deviceX/serialnumber +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + An example format is 16-bytes, 2-digits-per-byte, HEX-string + representing the sensor unique ID number. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-bno055 b/Documentation/ABI/testing/sysfs-bus-iio-bno055 new file mode 100644 index 000000000000..f32b1644e986 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-bno055 @@ -0,0 +1,81 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_accel_raw_range +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Raw (unscaled) range for acceleration readings. Unit after + application of scale is m/s^2. Note that this doesn't affects + the scale (which should be used when changing the maximum and + minimum readable value affects also the reading scaling factor). + +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_raw_range +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Range for angular velocity readings in radians per second. Note + that this does not affects the scale (which should be used when + changing the maximum and minimum readable value affects also the + reading scaling factor). + +What: /sys/bus/iio/devices/iio:deviceX/in_accel_raw_range_available +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + List of allowed values for in_accel_raw_range attribute + +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_raw_range_available +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + List of allowed values for in_anglvel_raw_range attribute + +What: /sys/bus/iio/devices/iio:deviceX/in_magn_calibration_fast_enable +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Can be 1 or 0. Enables/disables the "Fast Magnetometer + Calibration" HW function. + +What: /sys/bus/iio/devices/iio:deviceX/fusion_enable +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Can be 1 or 0. Enables/disables the "sensor fusion" (a.k.a. + NDOF) HW function. + +What: /sys/bus/iio/devices/iio:deviceX/calibration_data +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Reports the binary calibration data blob for the IMU sensors. + +What: /sys/bus/iio/devices/iio:deviceX/in_accel_calibration_auto_status +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Reports the autocalibration status for the accelerometer sensor. + Can be 0 (calibration non even enabled) or 1 to 5 where the greater + the number, the better the calibration status. + +What: /sys/bus/iio/devices/iio:deviceX/in_gyro_calibration_auto_status +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Reports the autocalibration status for the gyroscope sensor. + Can be 0 (calibration non even enabled) or 1 to 5 where the greater + the number, the better the calibration status. + +What: /sys/bus/iio/devices/iio:deviceX/in_magn_calibration_auto_status +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Reports the autocalibration status for the magnetometer sensor. + Can be 0 (calibration non even enabled) or 1 to 5 where the greater + the number, the better the calibration status. + +What: /sys/bus/iio/devices/iio:deviceX/sys_calibration_auto_status +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Reports the status for the IMU overall autocalibration. + Can be 0 (calibration non even enabled) or 1 to 5 where the greater + the number, the better the calibration status. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-cdc-ad7746 b/Documentation/ABI/testing/sysfs-bus-iio-cdc-ad7746 new file mode 100644 index 000000000000..02ca8941dce1 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-cdc-ad7746 @@ -0,0 +1,11 @@ +What: /sys/.../iio:deviceX/in_capacitableY_calibbias_calibration +What: /sys/.../iio:deviceX/in_capacitableY_calibscale_calibration +KernelVersion: 6.1 +Contact: linux-iio@vger.kernel.org +Description: + Write 1 to trigger a calibration of the calibbias or + calibscale. For calibscale, a full scale capacitance should + be connected to the capacitance input and a + calibscale_calibration then started. For calibbias see + the device datasheet section on "capacitive system offset + calibration". diff --git a/Documentation/ABI/testing/sysfs-devices-hisi_ptt b/Documentation/ABI/testing/sysfs-devices-hisi_ptt new file mode 100644 index 000000000000..82de6d710266 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-hisi_ptt @@ -0,0 +1,61 @@ +What: /sys/devices/hisi_ptt<sicl_id>_<core_id>/tune +Date: October 2022 +KernelVersion: 6.1 +Contact: Yicong Yang <yangyicong@hisilicon.com> +Description: This directory contains files for tuning the PCIe link + parameters(events). Each file is named after the event + of the PCIe link. + + See Documentation/trace/hisi-ptt.rst for more information. + +What: /sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_cpl +Date: October 2022 +KernelVersion: 6.1 +Contact: Yicong Yang <yangyicong@hisilicon.com> +Description: (RW) Controls the weight of Tx completion TLPs, which influence + the proportion of outbound completion TLPs on the PCIe link. + The available tune data is [0, 1, 2]. Writing a negative value + will return an error, and out of range values will be converted + to 2. The value indicates a probable level of the event. + +What: /sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_np +Date: October 2022 +KernelVersion: 6.1 +Contact: Yicong Yang <yangyicong@hisilicon.com> +Description: (RW) Controls the weight of Tx non-posted TLPs, which influence + the proportion of outbound non-posted TLPs on the PCIe link. + The available tune data is [0, 1, 2]. Writing a negative value + will return an error, and out of range values will be converted + to 2. The value indicates a probable level of the event. + +What: /sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_p +Date: October 2022 +KernelVersion: 6.1 +Contact: Yicong Yang <yangyicong@hisilicon.com> +Description: (RW) Controls the weight of Tx posted TLPs, which influence the + proportion of outbound posted TLPs on the PCIe link. + The available tune data is [0, 1, 2]. Writing a negative value + will return an error, and out of range values will be converted + to 2. The value indicates a probable level of the event. + +What: /sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/rx_alloc_buf_level +Date: October 2022 +KernelVersion: 6.1 +Contact: Yicong Yang <yangyicong@hisilicon.com> +Description: (RW) Control the allocated buffer watermark for inbound packets. + The packets will be stored in the buffer first and then transmitted + either when the watermark reached or when timed out. + The available tune data is [0, 1, 2]. Writing a negative value + will return an error, and out of range values will be converted + to 2. The value indicates a probable level of the event. + +What: /sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/tx_alloc_buf_level +Date: October 2022 +KernelVersion: 6.1 +Contact: Yicong Yang <yangyicong@hisilicon.com> +Description: (RW) Control the allocated buffer watermark of outbound packets. + The packets will be stored in the buffer first and then transmitted + either when the watermark reached or when timed out. + The available tune data is [0, 1, 2]. Writing a negative value + will return an error, and out of range values will be converted + to 2. The value indicates a probable level of the event. diff --git a/Documentation/ABI/testing/sysfs-driver-habanalabs b/Documentation/ABI/testing/sysfs-driver-habanalabs index 96646fb2e7a1..13b5b2ec3be7 100644 --- a/Documentation/ABI/testing/sysfs-driver-habanalabs +++ b/Documentation/ABI/testing/sysfs-driver-habanalabs @@ -16,7 +16,7 @@ Description: Version of the application running on the device's CPU What: /sys/class/habanalabs/hl<n>/clk_max_freq_mhz Date: Jun 2019 -KernelVersion: not yet upstreamed +KernelVersion: 5.7 Contact: ogabbay@kernel.org Description: Allows the user to set the maximum clock frequency, in MHz. The device clock might be set to lower value than the maximum. @@ -26,7 +26,7 @@ Description: Allows the user to set the maximum clock frequency, in MHz. What: /sys/class/habanalabs/hl<n>/clk_cur_freq_mhz Date: Jun 2019 -KernelVersion: not yet upstreamed +KernelVersion: 5.7 Contact: ogabbay@kernel.org Description: Displays the current frequency, in MHz, of the device clock. This property is valid only for the Gaudi ASIC family @@ -176,6 +176,12 @@ KernelVersion: 5.1 Contact: ogabbay@kernel.org Description: Version of the device's preboot F/W code +What: /sys/class/habanalabs/hl<n>/security_enabled +Date: Oct 2022 +KernelVersion: 6.1 +Contact: obitton@habana.ai +Description: Displays the device's security status + What: /sys/class/habanalabs/hl<n>/soft_reset Date: Jan 2019 KernelVersion: 5.1 @@ -230,6 +236,6 @@ Description: Version of the u-boot running on the device's CPU What: /sys/class/habanalabs/hl<n>/vrm_ver Date: Jan 2022 -KernelVersion: not yet upstreamed +KernelVersion: 5.17 Contact: ogabbay@kernel.org Description: Version of the Device's Voltage Regulator Monitor F/W code. N/A to GOYA and GAUDI diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml index d783d9276124..2bae06eed693 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml @@ -61,6 +61,9 @@ properties: maxItems: 1 description: Address translation error interrupt + power-domains: + maxItems: 1 + in-ports: $ref: /schemas/graph.yaml#/properties/ports additionalProperties: false diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml index 72ffe4d1e948..0c5b875cb654 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml @@ -98,6 +98,9 @@ properties: base cti node if compatible string arm,coresight-cti-v8-arch is used, or may appear in a trig-conns child node when appropriate. + power-domains: + maxItems: 1 + arm,cti-ctm-id: $ref: /schemas/types.yaml#/definitions/uint32 description: diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml index 1eeedc22857c..44a1041cb0fc 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml @@ -54,6 +54,9 @@ properties: - const: apb_pclk - const: atclk + power-domains: + maxItems: 1 + in-ports: $ref: /schemas/graph.yaml#/properties/ports diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml index a26ed9214e00..03792e9bd97a 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml @@ -54,6 +54,9 @@ properties: - const: apb_pclk - const: atclk + power-domains: + maxItems: 1 + qcom,replicator-loses-context: type: boolean description: diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml index fd06ede26ceb..90679788e0bf 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml @@ -54,6 +54,9 @@ properties: - const: apb_pclk - const: atclk + power-domains: + maxItems: 1 + in-ports: $ref: /schemas/graph.yaml#/properties/ports additionalProperties: false diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml index e0377ce48537..01200f67504a 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml @@ -73,6 +73,9 @@ properties: - const: apb_pclk - const: atclk + power-domains: + maxItems: 1 + arm,coresight-loses-context-with-cpu: type: boolean description: diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml index 374083956b20..cc8c3baa79b4 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml @@ -27,6 +27,9 @@ properties: compatible: const: arm,coresight-static-funnel + power-domains: + maxItems: 1 + in-ports: $ref: /schemas/graph.yaml#/properties/ports diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml index a34d8583830c..1892a091ac35 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml @@ -27,6 +27,9 @@ properties: compatible: const: arm,coresight-static-replicator + power-domains: + maxItems: 1 + in-ports: $ref: /schemas/graph.yaml#/properties/ports additionalProperties: false diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml index 905008faa012..378380c3f5aa 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml @@ -61,6 +61,9 @@ properties: - const: apb_pclk - const: atclk + power-domains: + maxItems: 1 + out-ports: $ref: /schemas/graph.yaml#/properties/ports additionalProperties: false diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml index 3463b6e53aef..cb8dceaca70e 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml @@ -55,6 +55,12 @@ properties: - const: apb_pclk - const: atclk + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + arm,buffer-size: $ref: /schemas/types.yaml#/definitions/uint32 deprecated: true diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml index e80d48200c37..61a0cdc27745 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml @@ -54,6 +54,9 @@ properties: - const: apb_pclk - const: atclk + power-domains: + maxItems: 1 + in-ports: $ref: /schemas/graph.yaml#/properties/ports additionalProperties: false diff --git a/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml b/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml index 5f07fb166c56..108460627d9a 100644 --- a/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml +++ b/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml @@ -33,6 +33,9 @@ properties: Handle to the cpu this ETE is bound to. $ref: /schemas/types.yaml#/definitions/phandle + power-domains: + maxItems: 1 + out-ports: description: | Output connections from the ETE to legacy CoreSight trace bus. diff --git a/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml b/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml new file mode 100644 index 000000000000..4e0b2d2b303e --- /dev/null +++ b/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/counter/ti,am62-ecap-capture.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments Enhanced Capture (eCAP) Module + +maintainers: + - Julien Panis <jpanis@baylibre.com> + +description: | + The eCAP module resources can be used to capture timestamps + on input signal events (falling/rising edges). + +properties: + compatible: + const: ti,am62-ecap-capture + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: fck + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + capture@23100000 { /* eCAP in capture mode on am62x */ + compatible = "ti,am62-ecap-capture"; + reg = <0x00 0x23100000 0x00 0x100>; + interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>; + power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 51 0>; + clock-names = "fck"; + }; + }; diff --git a/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml b/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml index aee45cb15592..527532f039ce 100644 --- a/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml +++ b/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml @@ -22,13 +22,14 @@ properties: description: SPI chip select maxItems: 1 - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml new file mode 100644 index 000000000000..3dbdc5af2804 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/ibm,occ-hwmon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IBM On-Chip Controller (OCC) accessed from a service processor + +maintainers: + - Eddie James <eajames@linux.ibm.com> + +description: | + The POWER processor On-Chip Controller (OCC) helps manage power and + thermals for the system. A service processor or baseboard management + controller can query the OCC for it's power and thermal data to report + through hwmon. + +properties: + compatible: + enum: + - ibm,p9-occ-hwmon + - ibm,p10-occ-hwmon + + ibm,no-poll-on-init: + description: This property describes whether or not the OCC should + be polled during driver initialization. + type: boolean + +required: + - compatible + +additionalProperties: false + +examples: + - | + hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml index 6f8f8a6258fe..7332442e5661 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml @@ -27,15 +27,16 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - vdd-supply: true required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml index 8d829ef878bc..f6f97164c2ca 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml @@ -25,14 +25,15 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - required: - compatible - reg - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml index d6afc1b8c272..185b68ffb536 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml @@ -4,28 +4,30 @@ $id: http://devicetree.org/schemas/iio/accel/adi,adxl313.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Analog Devices ADXL313 3-Axis Digital Accelerometer +title: Analog Devices ADXL312, ADXL313, and ADXL314 3-Axis Digital Accelerometers maintainers: - Lucas Stankus <lucas.p.stankus@gmail.com> description: | - Analog Devices ADXL313 3-Axis Digital Accelerometer that supports - both I2C & SPI interfaces. + Analog Devices ADXL312, ADXL313, and ADXL314 3-Axis Digital Accelerometer that + support both I2C & SPI interfaces. + https://www.analog.com/en/products/adxl312.html https://www.analog.com/en/products/adxl313.html + https://www.analog.com/en/products/adxl314.html properties: compatible: enum: + - adi,adxl312 - adi,adxl313 + - adi,adxl314 reg: maxItems: 1 spi-3wire: true - spi-max-frequency: true - vs-supply: description: Regulator that supplies power to the accelerometer @@ -48,7 +50,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml index 9bb039e2f533..346abfb13a3a 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml @@ -32,8 +32,6 @@ properties: spi-cpol: true - spi-max-frequency: true - interrupts: maxItems: 1 @@ -42,7 +40,10 @@ required: - reg - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml index ba54d6998f2e..14b487088ab4 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml @@ -45,13 +45,14 @@ properties: vddio-supply: description: Regulator that provides power to the bus - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml index d259e796c1d6..f10d98d34cb8 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml @@ -35,8 +35,6 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - vdd-supply: true vddio-supply: true @@ -45,7 +43,10 @@ required: - reg - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml index 38b59b6454ce..73a5c8f814cc 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml @@ -25,14 +25,15 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - required: - compatible - reg - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml index 942b23ad0712..5dd06f5905b4 100644 --- a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml @@ -20,8 +20,6 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - vdda-supply: true vddd-supply: true vddio-supply: true @@ -30,7 +28,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml index 478e75ae0885..457a709b583c 100644 --- a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml @@ -72,7 +72,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml index 272eb48eef5a..3cb82576d758 100644 --- a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml @@ -24,8 +24,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vdd-supply: true vddio-supply: true @@ -50,7 +48,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml index 9c7c66feeffc..c8659c5eba2a 100644 --- a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml +++ b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml @@ -39,13 +39,14 @@ properties: - "INT1" - "INT2" - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml index 390b87242fcb..f64d99b35492 100644 --- a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml +++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml @@ -29,13 +29,14 @@ properties: mount-matrix: description: an optional 3x3 mounting rotation matrix. - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml b/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml new file mode 100644 index 000000000000..23528dcaa073 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/iio/accel/memsensing,msa311.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: MEMSensing digital 3-Axis accelerometer + +maintainers: + - Dmitry Rokosov <ddrokosov@sberdevices.ru> + +description: | + MSA311 is a tri-axial, low-g accelerometer with I2C digital output for + sensitivity consumer applications. It has dynamical user selectable full + scales range of +-2g/+-4g/+-8g/+-16g and allows acceleration measurements + with output data rates from 1Hz to 1000Hz. + Datasheet can be found at following URL + https://cdn-shop.adafruit.com/product-files/5309/MSA311-V1.1-ENG.pdf + +properties: + compatible: + const: memsensing,msa311 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@62 { + compatible = "memsensing,msa311"; + reg = <0x62>; + interrupt-parent = <&gpio_intc>; + interrupts = <29 IRQ_TYPE_EDGE_RISING>; + vdd-supply = <&vcc_5v>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml index f6e2a16a710b..00c990caa1e4 100644 --- a/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml +++ b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml @@ -29,7 +29,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml index ad529ab2c6e2..65ce8ea14b52 100644 --- a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml +++ b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml @@ -27,8 +27,6 @@ properties: vdd-supply: description: phandle to the regulator that provides power to the accelerometer - spi-max-frequency: true - interrupts: maxItems: 1 @@ -44,7 +42,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml index fb3d0dae9bae..75a7184a4735 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml @@ -52,8 +52,6 @@ properties: avdd-supply: description: avdd supply can be used as reference for conversion. - spi-max-frequency: true - required: - compatible - reg @@ -106,7 +104,10 @@ patternProperties: additionalProperties: false -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml index 22b7ed3723f6..cc347dade4ef 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml @@ -30,8 +30,6 @@ properties: spi-cpha: true - spi-max-frequency: true - clocks: maxItems: 1 description: phandle to the master clock (mclk) @@ -94,7 +92,10 @@ required: - spi-cpol - spi-cpha -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml index a694d5794d4a..dfb8f305e2f0 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml @@ -28,8 +28,6 @@ properties: description: IRQ line for the ADC maxItems: 1 - spi-max-frequency: true - adi,voltage-alert-last-chan: $ref: /schemas/types.yaml#/definitions/uint32 description: @@ -55,7 +53,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml index a3e39a40c9b3..1bfbeed6f299 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml @@ -30,8 +30,6 @@ properties: spi-cpha: true - spi-max-frequency: true - '#address-cells': const: 1 @@ -65,7 +63,10 @@ patternProperties: additionalProperties: true -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml index ca414bb396c5..cd8ac5162d27 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml @@ -24,13 +24,15 @@ properties: vref-supply: true vdd-supply: true - spi-max-frequency: true required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml index 666414a9c0de..44c671eeda73 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml @@ -66,8 +66,6 @@ properties: to the other supplies. Needed to be able to establish channel scaling unless there is also an internal reference available (e.g. ad7091r) - spi-max-frequency: true - adi,conversion-start-gpios: description: A GPIO used to trigger the start of a conversion maxItems: 1 @@ -76,9 +74,9 @@ required: - compatible - reg -additionalProperties: false - allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + # Devices where reference is vcc - if: properties: @@ -158,6 +156,8 @@ allOf: properties: adi,conversion-start-gpios: false +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml index 516fc24d3346..ac5a47c8f070 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml @@ -32,8 +32,6 @@ properties: spi-cpol: true - spi-max-frequency: true - avcc-supply: true interrupts: @@ -105,7 +103,10 @@ required: - interrupts - adi,conversion-start-gpios -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml index a85a28145ef6..3ce59d4d065f 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml @@ -50,8 +50,6 @@ properties: reset-gpios: maxItems: 1 - spi-max-frequency: true - spi-cpol: true spi-cpha: true @@ -88,7 +86,10 @@ patternProperties: - reg additionalProperties: false -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml index e82194974eea..07f9d1c09c7d 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml @@ -8,7 +8,6 @@ title: Analog Devices AD7923 and similars with 4 and 8 Channel ADCs. maintainers: - Michael Hennerich <michael.hennerich@analog.com> - - Patrick Vasseur <patrick.vasseur@c-s.fr> description: | Analog Devices AD7904, AD7914, AD7923, AD7924 4 Channel ADCs, and AD7908, @@ -37,19 +36,24 @@ properties: description: | The regulator supply for ADC reference voltage. + adi,range-double: + description: Sets the analog input range from 0 to 2xVREF. + type: boolean + '#address-cells': const: 1 '#size-cells': const: 0 - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml index 0b10ed5f74ae..9ee4d977c5ed 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml @@ -49,8 +49,6 @@ properties: default: 4096000 - spi-max-frequency: true - '#io-channel-cells': const: 1 @@ -64,7 +62,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml index 52490cbb0af0..56bcbe5dcd79 100644 --- a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml +++ b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml @@ -24,8 +24,6 @@ properties: GPIO used for controlling the reset pin maxItems: 1 - spi-max-frequency: true - "#io-channel-cells": const: 1 @@ -33,7 +31,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml index 0bd2fc0356c8..5207c919abe0 100644 --- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml @@ -22,15 +22,15 @@ properties: reg: maxItems: 1 - spi-max-frequency: - description: maximal spi bus frequency supported - required: - compatible - vref-supply - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml index c1772b568cd1..875f394576c2 100644 --- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml @@ -13,10 +13,14 @@ description: | 16bit ADC supporting up to 16 single ended or 8 differential inputs. I2C interface. + https://www.analog.com/media/en/technical-documentation/data-sheets/2497fb.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/2499fe.pdf + properties: compatible: - const: - lltc,ltc2497 + enum: + - lltc,ltc2497 + - lltc,ltc2499 reg: true vref-supply: true diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml index 46b7747076b9..d0a7ed26d9ea 100644 --- a/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml @@ -45,7 +45,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml index 0cf87556ef82..4f74cb33383a 100644 --- a/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml @@ -26,13 +26,16 @@ properties: minimum: 100000 maximum: 4800000 -additionalProperties: false - required: - compatible - reg - vref-supply +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml index e948b3e37b0c..bb336e33ebe2 100644 --- a/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml @@ -28,23 +28,25 @@ properties: vref-supply: description: External reference, needed to establish input scaling -if: - properties: - compatible: - contains: - const: maxim,max1118 -then: - required: - - vref-supply -else: - properties: - vref-supply: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - if: + properties: + compatible: + contains: + const: maxim,max1118 + then: + required: + - vref-supply + else: + properties: + vref-supply: false required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml new file mode 100644 index 000000000000..5f9e043cf5cd --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/maxim,max11205.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX11205 ADC + +maintainers: + - Ramona Bolboaca <ramona.bolboaca@analog.com> + +description: | + The MAX11205 is an ultra-low-power (< 300FA max active current), + high-resolution, serial-output ADC. + + https://datasheets.maximintegrated.com/en/ds/MAX11205.pdf + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - maxim,max11205a + - maxim,max11205b + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + spi-max-frequency: + maximum: 5000000 + + spi-cpha: true + + vref-supply: + description: + The regulator supply for the ADC reference voltage. This is a differential + reference. It is equal to the V_REFP - V_REFN. The maximum value is 3.6V. + +required: + - compatible + - reg + - interrupts + - spi-max-frequency + - spi-cpha + - vref-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + adc@0 { + compatible = "maxim,max11205a"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpha; + interrupt-parent = <&gpio>; + interrupts = <19 IRQ_TYPE_EDGE_FALLING>; + vref-supply = <&max11205_vref>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml index 4c7e0d94bff1..58b12fe8070c 100644 --- a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml @@ -39,15 +39,16 @@ properties: thus enabling power-down mode. maxItems: 1 - spi-max-frequency: true - required: - compatible - reg - vdd-supply - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml index fcc1ba53b20d..18108f0f3731 100644 --- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml @@ -32,7 +32,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true spi-cpha: true spi-cpol: true @@ -51,7 +50,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml index 95ab285f4eba..2c93fb41f172 100644 --- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml @@ -36,6 +36,13 @@ properties: description: IRQ line of the ADC maxItems: 1 + microchip,data-ready-hiz: + description: + Data Ready Pin Inactive State Control + true = The DR pin state is high-impedance + false = The DR pin state is logic high + type: boolean + microchip,device-addr: description: Device address when multiple MCP3911 chips are present on the same SPI bus. $ref: /schemas/types.yaml#/definitions/uint32 @@ -51,7 +58,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml index 74a4a9d95798..8bac0c4120dd 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml @@ -58,6 +58,7 @@ required: patternProperties: "^.*@[0-9a-f]+$": type: object + additionalProperties: false description: | Represents the external channels which are connected to the ADC. For compatible property "qcom,spmi-vadc" following channels, also known as diff --git a/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml new file mode 100644 index 000000000000..88e008629ea8 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/richtek,rtq6056.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RTQ6056 Bi-Directional Current and Power Monitor with 16-bit ADC + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + The RTQ6056 is a high accuracy current-sense monitor with I2C and SMBus + interface, and the device provides full information for system by reading + out the loading current and power. + + The device monitors both of the drops across sense resistor and the BUS + voltage, converts into the current in amperes, and power in watts through + internal analog-to-digital converter ADC. The programmable calibration, + adjustable conversion time, and averaging function are also built in for + more design flexibility. + + Datasheet is available at + https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf + +properties: + compatible: + const: richtek,rtq6056 + + reg: + maxItems: 1 + + "#io-channel-cells": + const: 1 + + shunt-resistor-micro-ohms: + description: Shunt IN+/IN- sensing node resistor + +required: + - compatible + - reg + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + adc@40 { + compatible = "richtek,rtq6056"; + reg = <0x40>; + #io-channel-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml index 92f9472a77ae..1970503389aa 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -72,6 +72,7 @@ additionalProperties: false patternProperties: "^filter@[0-9]+$": type: object + unevaluatedProperties: false description: child node properties: @@ -225,6 +226,7 @@ patternProperties: patternProperties: "^dfsdm-dai+$": type: object + additionalProperties: false description: child node properties: diff --git a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml index 9049c699152f..333744a2159c 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml @@ -13,8 +13,7 @@ description: This ADC forms part of an ST microelectronics STMPE multifunction device . The ADC is shared with the STMPE touchscreen. As a result some ADC related settings are specified in the parent node. - The node name myst be stmpe_adc and should be a child node of the stmpe node - to which it belongs. + The node should be a child node of the stmpe node to which it belongs. properties: compatible: diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml index f5a923cc847f..686721176a58 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml @@ -24,8 +24,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: description: External reference, needed to establish input scaling @@ -37,7 +35,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml index 1a113b30a414..726d2cbfa368 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml @@ -19,8 +19,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: description: External reference, needed to establish input scaling @@ -37,7 +35,10 @@ required: - spi-cpol - spi-cpha -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml index ae5ce60987fe..9b072b057f16 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml @@ -19,7 +19,6 @@ properties: reg: true vref-supply: true - spi-max-frequency: true "#io-channel-cells": const: 1 @@ -28,7 +27,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml index ec3b2edf1fb7..076088a328c3 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml @@ -31,8 +31,6 @@ properties: maxItems: 1 description: Conversion clock input. - spi-max-frequency: true - vref-p-supply: description: The regulator supply for positive analog voltage reference @@ -62,7 +60,10 @@ required: - clocks - vref-p-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml index d54a0183f024..775eee972b12 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml @@ -27,8 +27,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: true "#io-channel-cells": @@ -39,7 +37,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml index 3f4f334d6f73..afe782522904 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml @@ -21,8 +21,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vdda-supply: true "#io-channel-cells": @@ -32,7 +30,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml index a3b79438a13a..2c3c2cf2145c 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml @@ -43,6 +43,7 @@ additionalProperties: false patternProperties: "^channel@[0-7]+$": type: object + additionalProperties: false description: Child nodes needed for each channel that the platform uses. diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml index 2e6abc9d746a..56a3f1766aab 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml @@ -18,8 +18,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - spi-cpha: true reset-gpios: @@ -32,7 +30,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml index e0670e3fbb72..55c2c73626f4 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments ADS131E0x 4-, 6- and 8-Channel ADCs maintainers: - - Tomislav Denis <tomislav.denis@avl.com> + - Jonathan Cameron <jic23@kernel.org> description: | The ADS131E0x are a family of multichannel, simultaneous sampling, @@ -28,8 +28,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - spi-cpha: true clocks: @@ -120,7 +118,10 @@ patternProperties: additionalProperties: false -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml index b8c398187d5c..f75b2c702986 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml @@ -19,8 +19,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: description: Supply the 2.5V or 5V reference voltage @@ -32,7 +30,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml index a0af4b24877f..f26fdbc15f84 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml @@ -25,13 +25,14 @@ properties: description: Optional external reference. If not supplied, assume REFSEL input tied low to enable the internal reference. - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml index d6f21d5cccd7..b32be24a9f98 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml @@ -11,9 +11,14 @@ maintainers: properties: compatible: - enum: - - ti,am3359-adc - - ti,am4372-adc + oneOf: + - enum: + - ti,am3359-adc + - ti,am4372-adc + - items: + - enum: + - ti,am654-adc + - const: ti,am3359-adc '#io-channel-cells': const: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml index 6c2539b3d707..314d1d99bf73 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml @@ -21,8 +21,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: true "#io-channel-cells": @@ -33,7 +31,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml index 601d69971d84..bdf3bba2d750 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml @@ -23,7 +23,8 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true + vref-supply: + description: Optional supply of the reference voltage "#io-channel-cells": const: 1 @@ -59,7 +60,10 @@ patternProperties: additionalProperties: false -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml index 3698b4b0900f..be93c109d6ac 100644 --- a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml +++ b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml @@ -134,6 +134,7 @@ properties: ams-pl@400: type: object + additionalProperties: false description: PL-SYSMON is capable of monitoring off chip voltage and temperature. PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring diff --git a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml index baa65a521bad..03bb90a7f4f8 100644 --- a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml +++ b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml @@ -63,6 +63,7 @@ additionalProperties: false patternProperties: "^channel@[0-3]$": type: object + additionalProperties: false description: Represents the external channels which are connected to the device. properties: diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml index 5277479be382..c15da155d300 100644 --- a/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml @@ -27,14 +27,15 @@ properties: Enable internal buffer to drive the reference pin. type: boolean - spi-max-frequency: true - required: - compatible - reg - avdd-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml index 9c48c76993fe..fee0f023a8c8 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml @@ -78,6 +78,7 @@ patternProperties: custom-output-range-config: type: object + additionalProperties: false description: Configuration of custom range when adi,output-range-microvolt is not present. The formulas for calculation the output voltages are diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml index 05ed4e0ec364..c04165fa9259 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml @@ -95,15 +95,12 @@ properties: vrefD-supply: true vref-supply: true - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - # Shared external vref, no internal reference if: properties: @@ -232,6 +229,8 @@ allOf: - vrefA-supply - vrefB-supply +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml index 65f86f26947c..86e2884cdfb1 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml @@ -28,10 +28,6 @@ properties: vref1-supply: true vref2-supply: true - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg @@ -39,6 +35,7 @@ required: - vref1-supply allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -63,6 +60,8 @@ allOf: required: - vref2-supply +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml index d599b418a020..ff50c72c62b5 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml @@ -39,14 +39,15 @@ properties: description: If not supplied devices will use internal regulators. - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml index 188f656617e3..52d089ebde95 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml @@ -26,13 +26,14 @@ properties: maxItems: 1 description: Fault signal. - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml index 044332c97743..d2af2d491986 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml @@ -27,19 +27,16 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - VREF-supply: true VREFA-supply: true VREFB-supply: true -additionalProperties: false - required: - compatible - reg allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -72,6 +69,8 @@ allOf: - VREFA-supply - VREFB-supply +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml index 330383b85eeb..4d5111a5f9bd 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml @@ -22,17 +22,18 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: description: If not present, internal reference will be used. -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml index 5c26441eae9f..13f214234b8e 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml @@ -53,14 +53,15 @@ properties: vcc-supply: description: If not supplied the internal reference is used. - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml index f866b88e1440..9a3c2926bf85 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml @@ -25,8 +25,6 @@ properties: description: Either this or spi-cpol but not both. spi-cpol: true - spi-max-frequency: true - adi,ext-dc-dc-compenstation-resistor: $ref: /schemas/types.yaml#/definitions/flag description: @@ -67,8 +65,6 @@ required: - compatible - reg -additionalProperties: false - patternProperties: "^channel@[0-7]$": type: object @@ -123,6 +119,11 @@ oneOf: - required: - spi-cpol +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml index fd4edca34a28..e49e7556175d 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml @@ -16,7 +16,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true spi-cpha: true adi,dc-dc-mode: @@ -99,6 +98,7 @@ required: - adi,dc-dc-mode allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: adi,dc-dc-mode: @@ -115,7 +115,7 @@ allOf: required: - adi,range-microvolt -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml index 7f95a9ed55fe..df550b5af2f7 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml @@ -22,18 +22,15 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: description: If not supplied, internal reference will be used. -additionalProperties: false - required: - compatible - reg allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -45,6 +42,8 @@ allOf: required: - vref-supply +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml index 8e893d52bfb1..0b409a727a43 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml @@ -22,18 +22,15 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vrefAB-supply: true vrefCD-supply: true -additionalProperties: false - required: - compatible - reg allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -46,6 +43,8 @@ allOf: - vrefAB-supply - vrefCD-supply +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml index 24ac40180ac1..8e7da0de918f 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml @@ -49,8 +49,6 @@ properties: asserted during driver probe. maxItems: 1 - spi-max-frequency: true - '#address-cells': const: 1 @@ -62,6 +60,7 @@ properties: connected to the DAC. Channel 0 can act both as a current source and sink. type: object + additionalProperties: false properties: reg: @@ -85,6 +84,7 @@ properties: description: Represents an external channel which are connected to the DAC. type: object + additionalProperties: false properties: reg: @@ -101,6 +101,7 @@ properties: description: Represents an external channel which are connected to the DAC. type: object + additionalProperties: false properties: reg: @@ -116,6 +117,7 @@ properties: patternProperties: "^channel@([3-5])$": type: object + additionalProperties: false description: Represents the external channels which are connected to the DAC. properties: reg: @@ -138,7 +140,10 @@ required: - channel@4 - channel@5 -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml index 650d1ebdcec3..3a84739736f6 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml @@ -23,19 +23,20 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vdd-supply: true vss-supply: true -additionalProperties: false - required: - compatible - reg - vdd-supply - vss-supply +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml index 6a3990a8d0ad..1849a2ff05c7 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml @@ -19,19 +19,16 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vrefh-supply: true vrefl-supply: true -additionalProperties: false - required: - compatible - reg - vrefh-supply allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -44,6 +41,8 @@ allOf: properties: vrefl-supply: false +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml index 48f9e7d29423..15cc6bf59b13 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml @@ -48,6 +48,7 @@ properties: patternProperties: "^channel@([0-9]|1[0-5])$": type: object + additionalProperties: false properties: reg: diff --git a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml index 4c430abcdbf9..19374401e509 100644 --- a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml +++ b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml @@ -21,17 +21,18 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: true -additionalProperties: false - required: - compatible - reg - vref-supply +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml index b0157050f1ee..201b04af2b22 100644 --- a/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml @@ -33,21 +33,22 @@ properties: vref-supply: description: Needed to provide output scaling. - spi-max-frequency: true - required: - compatible - reg - vref-supply -additionalProperties: false - oneOf: - required: - spi-cpha - required: - spi-cpol +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | vref_2v5_reg: regulator-vref { diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml index 10be98d1f19c..a6814587dbc4 100644 --- a/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml @@ -24,14 +24,15 @@ properties: Reference voltage must be supplied to establish the scaling of the output voltage. - spi-max-frequency: true - required: - compatible - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml index d172b142f6ed..20dd1370660d 100644 --- a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml @@ -29,13 +29,14 @@ properties: DACs are loaded when the pin connected to this GPIO is pulled low. maxItems: 1 - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml index 6b3a611e1cf1..0144f74a4768 100644 --- a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml +++ b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml @@ -40,15 +40,16 @@ properties: output stage will shut down until the ADF4371/ADF4372 achieves lock as measured by the digital lock detect circuitry. - spi-max-frequency: true - required: - compatible - reg - clocks - clock-names -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml index d861526c5c42..6c5ad426a016 100644 --- a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml +++ b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml @@ -25,14 +25,15 @@ properties: reset-gpios: true - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml index 340be256f283..d166dbca18c3 100644 --- a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml @@ -25,8 +25,6 @@ properties: spi-cpol: true - spi-max-frequency: true - interrupts: maxItems: 1 @@ -35,7 +33,10 @@ required: - reg - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml index dd29dc6c4c19..56e0dc20f5e4 100644 --- a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml @@ -47,8 +47,6 @@ properties: - DIO3 - DIO4 - spi-max-frequency: true - spi-cpha: true spi-cpol: true @@ -96,8 +94,6 @@ properties: - DIO3 - DIO4 -additionalProperties: false - required: - compatible - reg @@ -106,6 +102,11 @@ required: - spi-cpol - spi-max-frequency +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml index 6e73cd889b5c..a0760382548d 100644 --- a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml +++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml @@ -46,13 +46,14 @@ properties: mount-matrix: description: an optional 3x3 mounting rotation matrix - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml new file mode 100644 index 000000000000..e0d06db161a9 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/imu/bosch,bno055.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch BNO055 + +maintainers: + - Andrea Merello <andrea.merello@iit.it> + +description: | + Inertial Measurement Unit with Accelerometer, Gyroscope, Magnetometer and + internal MCU for sensor fusion + https://www.bosch-sensortec.com/products/smart-sensors/bno055/ + +properties: + compatible: + enum: + - bosch,bno055 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + serial { + imu { + compatible = "bosch,bno055"; + reset-gpios = <&gpio0 54 GPIO_ACTIVE_LOW>; + clocks = <&imu_clk>; + }; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + imu@28 { + compatible = "bosch,bno055"; + reg = <0x28>; + reset-gpios = <&gpio0 54 GPIO_ACTIVE_LOW>; + clocks = <&imu_clk>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml index 4c1c083d0e92..488349755c99 100644 --- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml +++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml @@ -47,7 +47,6 @@ properties: vddio-supply: description: Regulator that provides power to the bus - spi-max-frequency: true spi-cpha: true spi-cpol: true @@ -56,7 +55,10 @@ required: - reg - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml index 3ebc6526d82d..ec64d7877fe5 100644 --- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml +++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml @@ -40,8 +40,6 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - vdd-supply: true vddio-supply: true @@ -54,6 +52,7 @@ properties: These devices also support an auxiliary i2c bus via an i2c-gate. allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: not: properties: @@ -67,7 +66,7 @@ allOf: properties: i2c-gate: false -additionalProperties: false +unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml index 0203b83b8587..24416b59b782 100644 --- a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml +++ b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml @@ -36,13 +36,14 @@ properties: drive-open-drain: type: boolean - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml index 5d4839f00898..fe1e02e5d7b3 100644 --- a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml +++ b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml @@ -35,6 +35,9 @@ properties: - items: - const: st,asm330lhhx - const: st,lsm6dsr + - items: + - const: st,lsm6dstx + - const: st,lsm6dst reg: maxItems: 1 @@ -45,8 +48,6 @@ properties: description: Supports up to 2 interrupt lines via the INT1 and INT2 pins. - spi-max-frequency: true - vdd-supply: description: if defined provides VDD power to the sensor. @@ -81,12 +82,15 @@ properties: wakeup-source: $ref: /schemas/types.yaml#/definitions/flag -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml new file mode 100644 index 000000000000..7de1b0e721ca --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/liteon,ltrf216a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LTRF216A Ambient Light Sensor + +maintainers: + - Shreeya Patel <shreeya.patel@collabora.com> + +description: + Ambient light sensing with an i2c interface. + +properties: + compatible: + const: liteon,ltrf216a + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: + description: Regulator that provides power to the sensor. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@53 { + compatible = "liteon,ltrf216a"; + reg = <0x53>; + vdd-supply = <&vdd_regulator>; + interrupt-parent = <&gpio0>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml index 567697d996ec..87e88f2a9908 100644 --- a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml +++ b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml @@ -25,14 +25,15 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml index 32e92bced81f..896fe0b5edcc 100644 --- a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml +++ b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml @@ -80,14 +80,15 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml index be2be4b556db..1f9fe15b4b3c 100644 --- a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: All Sensors DLH series low voltage digital pressure sensors maintainers: - - Tomislav Denis <tomislav.denis@avl.com> + - Jonathan Cameron <jic23@kernel.org> description: | Bindings for the All Sensors DLH series pressure sensors. diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml index 49257f9251e8..72cd2c2d3f17 100644 --- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/iio/pressure/bmp085.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: BMP085/BMP180/BMP280/BME280 pressure iio sensors +title: BMP085/BMP180/BMP280/BME280/BMP380 pressure iio sensors maintainers: - Andreas Klinger <ak@it-klinger.de> @@ -16,6 +16,7 @@ description: | https://www.bosch-sensortec.com/bst/products/all_products/bmp180 https://www.bosch-sensortec.com/bst/products/all_products/bmp280 https://www.bosch-sensortec.com/bst/products/all_products/bme280 + https://www.bosch-sensortec.com/bst/products/all_products/bmp380 properties: compatible: @@ -24,6 +25,7 @@ properties: - bosch,bmp180 - bosch,bmp280 - bosch,bme280 + - bosch,bmp380 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml b/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml index a88b3b14d6bd..dd2ae2bd1ad7 100644 --- a/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml +++ b/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml @@ -40,10 +40,6 @@ properties: description: Reset the sensorhub. - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg @@ -52,6 +48,11 @@ required: - mcu-ap-gpios - mcu-reset-gpios +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml index fcb2902683c7..250439b13152 100644 --- a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml +++ b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml @@ -73,6 +73,7 @@ properties: - description: STMicroelectronics Pressure Sensors enum: - st,lps001wp-press + - st,lps22df - st,lps22hb-press - st,lps22hh - st,lps25h-press @@ -141,6 +142,7 @@ allOf: - st,lis2mdl - st,lis3l02dq - st,lis3lv02dl-accel + - st,lps22df - st,lps22hb-press - st,lps22hh - st,lps25h-press diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml index 9969bac66aa1..0805ed7e2113 100644 --- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml @@ -32,7 +32,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true spi-cpha: true required: @@ -40,6 +39,7 @@ required: - reg allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -53,7 +53,7 @@ allOf: properties: spi-cpha: false -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml index 873b34766676..228a94165487 100644 --- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml @@ -19,7 +19,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true spi-cpha: true thermocouple-type: @@ -34,7 +33,10 @@ required: - reg - spi-cpha -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml index aafb33b16549..a2823ed6867b 100644 --- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml @@ -25,7 +25,6 @@ properties: enables 3-wire RTD connection. Else 2-wire or 4-wire RTD connection. type: boolean - spi-max-frequency: true spi-cpha: true required: @@ -33,7 +32,10 @@ required: - reg - spi-cpha -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml index b547ddcd544a..4a55e7f25ae7 100644 --- a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml @@ -35,6 +35,9 @@ properties: maxItems: 1 description: Default is 0x3a, but can be reprogrammed. + vdd-supply: + description: provide VDD power to the sensor. + required: - compatible - reg @@ -50,6 +53,7 @@ examples: temp-sensor@3a { compatible = "melexis,mlx90632"; reg = <0x3a>; + vdd-supply = <&ldo4_reg>; }; }; ... diff --git a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml index b5a1109f2ee1..75e0a516e59a 100644 --- a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml @@ -30,6 +30,7 @@ properties: - mediatek,mt8173-efuse - mediatek,mt8183-efuse - mediatek,mt8186-efuse + - mediatek,mt8188-efuse - mediatek,mt8192-efuse - mediatek,mt8195-efuse - mediatek,mt8516-efuse diff --git a/Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml b/Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml new file mode 100644 index 000000000000..f97c6beb4766 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/microchip,lan9662-otpc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip LAN9662 OTP Controller (OTPC) + +maintainers: + - Horatiu Vultur <horatiu.vultur@microchip.com> + +description: | + OTP controller drives a NVMEM memory where system specific data + (e.g. hardware configuration settings, chip identifiers) or + user specific data could be stored. + +allOf: + - $ref: nvmem.yaml# + +properties: + compatible: + oneOf: + - items: + - const: microchip,lan9668-otpc + - const: microchip,lan9662-otpc + - enum: + - microchip,lan9662-otpc + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + otpc: otp@e0021000 { + compatible = "microchip,lan9662-otpc"; + reg = <0xe0021000 0x300>; + }; + +... diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml index dede8892ee01..2eab2f46cb65 100644 --- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml +++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml @@ -18,6 +18,7 @@ properties: - enum: - qcom,apq8064-qfprom - qcom,apq8084-qfprom + - qcom,ipq8064-qfprom - qcom,msm8974-qfprom - qcom,msm8916-qfprom - qcom,msm8996-qfprom @@ -25,7 +26,9 @@ properties: - qcom,qcs404-qfprom - qcom,sc7180-qfprom - qcom,sc7280-qfprom + - qcom,sdm630-qfprom - qcom,sdm845-qfprom + - qcom,sm6115-qfprom - const: qcom,qfprom reg: diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 1faea7d315c0..48b65069e6f2 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -779,6 +779,8 @@ patternProperties: description: MELFAS Inc. "^mellanox,.*": description: Mellanox Technologies + "^memsensing,.*": + description: MEMSensing Microsystems Co., Ltd. "^memsic,.*": description: MEMSIC Inc. "^menlo,.*": diff --git a/Documentation/iio/bno055.rst b/Documentation/iio/bno055.rst new file mode 100644 index 000000000000..9a489a79d8f5 --- /dev/null +++ b/Documentation/iio/bno055.rst @@ -0,0 +1,51 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================== +BNO055 driver +============================== + +1. Overview +=========== + +This driver supports Bosch BNO055 IMUs (on both serial and I2C busses). + +Accelerometer, magnetometer and gyroscope measures are always provided. +When "fusion_enable" sysfs attribute is set to 1, orientation (both Euler +angles and quaternion), linear velocity and gravity vector are also +provided, but some sensor settings (e.g. low pass filtering and range) +became locked (the IMU firmware controls them). + +This driver supports also IIO buffers. + +2. Calibration +============== + +The IMU continuously performs an autocalibration procedure if (and only if) +operating in fusion mode. The magnetometer autocalibration can however be +disabled writing 0 in the sysfs in_magn_calibration_fast_enable attribute. + +The driver provides access to autocalibration flags (i.e. you can known if +the IMU has successfully autocalibrated) and to the calibration data blob. + +The user can save this blob in a firmware file (i.e. in /lib/firmware) that +the driver looks for at probe time. If found, then the IMU is initialized +with this calibration data. This saves the user from performing the +calibration procedure every time (which consist of moving the IMU in +various way). + +The driver looks for calibration data file using two different names: first +a file whose name is suffixed with the IMU unique ID (exposed in sysfs as +serial_number) is searched for; this is useful when there is more than one +IMU instance. If this file is not found, then a "generic" calibration file +is searched for (which can be used when only one IMU is present, without +struggling with fancy names, that change on each device). + +Valid calibration file names would be e.g. + bno055-caldata-0e7c26a33541515120204a35342b04ff.dat + bno055-caldata.dat + +In non-fusion mode the IIO 'offset' attributes provide access to the +offsets from calibration data (if any), so that the user can apply them to +the accel, angvel and magn IIO attributes. In fusion mode they are not +needed (the IMU firmware internally applies those corrections) and they +read as zero. diff --git a/Documentation/iio/index.rst b/Documentation/iio/index.rst index 58b7a4ebac51..1b7292c58cd0 100644 --- a/Documentation/iio/index.rst +++ b/Documentation/iio/index.rst @@ -10,3 +10,5 @@ Industrial I/O iio_configfs ep93xx_adc + + bno055 diff --git a/Documentation/trace/coresight/coresight-cpu-debug.rst b/Documentation/trace/coresight/coresight-cpu-debug.rst index 993dd294b81b..836b35532667 100644 --- a/Documentation/trace/coresight/coresight-cpu-debug.rst +++ b/Documentation/trace/coresight/coresight-cpu-debug.rst @@ -117,7 +117,8 @@ divide into below cases: Device Tree Bindings -------------------- -See Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt for details. +See Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml for +details. How to use the module diff --git a/Documentation/trace/coresight/coresight-etm4x-reference.rst b/Documentation/trace/coresight/coresight-etm4x-reference.rst index fb7578fd9372..70e34b8c81c1 100644 --- a/Documentation/trace/coresight/coresight-etm4x-reference.rst +++ b/Documentation/trace/coresight/coresight-etm4x-reference.rst @@ -71,6 +71,20 @@ the ‘TRC’ prefix. ---- +:File: ``ts_source`` (ro) +:Trace Registers: None. +:Notes: + When FEAT_TRF is implemented, value of TRFCR_ELx.TS used for trace session. Otherwise -1 + indicates an unknown time source. Check trcidr0.tssize to see if a global timestamp is + available. + +:Example: + ``$> cat ts_source`` + + ``$> 1`` + +---- + :File: ``addr_idx`` (rw) :Trace Registers: None. :Notes: diff --git a/Documentation/trace/hisi-ptt.rst b/Documentation/trace/hisi-ptt.rst new file mode 100644 index 000000000000..4f87d8e21065 --- /dev/null +++ b/Documentation/trace/hisi-ptt.rst @@ -0,0 +1,298 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================================== +HiSilicon PCIe Tune and Trace device +====================================== + +Introduction +============ + +HiSilicon PCIe tune and trace device (PTT) is a PCIe Root Complex +integrated Endpoint (RCiEP) device, providing the capability +to dynamically monitor and tune the PCIe link's events (tune), +and trace the TLP headers (trace). The two functions are independent, +but is recommended to use them together to analyze and enhance the +PCIe link's performance. + +On Kunpeng 930 SoC, the PCIe Root Complex is composed of several +PCIe cores. Each PCIe core includes several Root Ports and a PTT +RCiEP, like below. The PTT device is capable of tuning and +tracing the links of the PCIe core. +:: + + +--------------Core 0-------+ + | | [ PTT ] | + | | [Root Port]---[Endpoint] + | | [Root Port]---[Endpoint] + | | [Root Port]---[Endpoint] + Root Complex |------Core 1-------+ + | | [ PTT ] | + | | [Root Port]---[ Switch ]---[Endpoint] + | | [Root Port]---[Endpoint] `-[Endpoint] + | | [Root Port]---[Endpoint] + +---------------------------+ + +The PTT device driver registers one PMU device for each PTT device. +The name of each PTT device is composed of 'hisi_ptt' prefix with +the id of the SICL and the Core where it locates. The Kunpeng 930 +SoC encapsulates multiple CPU dies (SCCL, Super CPU Cluster) and +IO dies (SICL, Super I/O Cluster), where there's one PCIe Root +Complex for each SICL. +:: + + /sys/devices/hisi_ptt<sicl_id>_<core_id> + +Tune +==== + +PTT tune is designed for monitoring and adjusting PCIe link parameters (events). +Currently we support events in 2 classes. The scope of the events +covers the PCIe core to which the PTT device belongs. + +Each event is presented as a file under $(PTT PMU dir)/tune, and +a simple open/read/write/close cycle will be used to tune the event. +:: + + $ cd /sys/devices/hisi_ptt<sicl_id>_<core_id>/tune + $ ls + qos_tx_cpl qos_tx_np qos_tx_p + tx_path_rx_req_alloc_buf_level + tx_path_tx_req_alloc_buf_level + $ cat qos_tx_dp + 1 + $ echo 2 > qos_tx_dp + $ cat qos_tx_dp + 2 + +Current value (numerical value) of the event can be simply read +from the file, and the desired value written to the file to tune. + +1. Tx Path QoS Control +------------------------ + +The following files are provided to tune the QoS of the tx path of +the PCIe core. + +- qos_tx_cpl: weight of Tx completion TLPs +- qos_tx_np: weight of Tx non-posted TLPs +- qos_tx_p: weight of Tx posted TLPs + +The weight influences the proportion of certain packets on the PCIe link. +For example, for the storage scenario, increase the proportion +of the completion packets on the link to enhance the performance as +more completions are consumed. + +The available tune data of these events is [0, 1, 2]. +Writing a negative value will return an error, and out of range +values will be converted to 2. Note that the event value just +indicates a probable level, but is not precise. + +2. Tx Path Buffer Control +------------------------- + +Following files are provided to tune the buffer of tx path of the PCIe core. + +- rx_alloc_buf_level: watermark of Rx requested +- tx_alloc_buf_level: watermark of Tx requested + +These events influence the watermark of the buffer allocated for each +type. Rx means the inbound while Tx means outbound. The packets will +be stored in the buffer first and then transmitted either when the +watermark reached or when timed out. For a busy direction, you should +increase the related buffer watermark to avoid frequently posting and +thus enhance the performance. In most cases just keep the default value. + +The available tune data of above events is [0, 1, 2]. +Writing a negative value will return an error, and out of range +values will be converted to 2. Note that the event value just +indicates a probable level, but is not precise. + +Trace +===== + +PTT trace is designed for dumping the TLP headers to the memory, which +can be used to analyze the transactions and usage condition of the PCIe +Link. You can choose to filter the traced headers by either Requester ID, +or those downstream of a set of Root Ports on the same core of the PTT +device. It's also supported to trace the headers of certain type and of +certain direction. + +You can use the perf command `perf record` to set the parameters, start +trace and get the data. It's also supported to decode the trace +data with `perf report`. The control parameters for trace is inputted +as event code for each events, which will be further illustrated later. +An example usage is like +:: + + $ perf record -e hisi_ptt0_2/filter=0x80001,type=1,direction=1, + format=1/ -- sleep 5 + +This will trace the TLP headers downstream root port 0000:00:10.1 (event +code for event 'filter' is 0x80001) with type of posted TLP requests, +direction of inbound and traced data format of 8DW. + +1. Filter +--------- + +The TLP headers to trace can be filtered by the Root Ports or the Requester ID +of the Endpoint, which are located on the same core of the PTT device. You can +set the filter by specifying the `filter` parameter which is required to start +the trace. The parameter value is 20 bit. Bit 19 indicates the filter type. +1 for Root Port filter and 0 for Requester filter. Bit[15:0] indicates the +filter value. The value for a Root Port is a mask of the core port id which is +calculated from its PCI Slot ID as (slotid & 7) * 2. The value for a Requester +is the Requester ID (Device ID of the PCIe function). Bit[18:16] is currently +reserved for extension. + +For example, if the desired filter is Endpoint function 0000:01:00.1 the filter +value will be 0x00101. If the desired filter is Root Port 0000:00:10.0 then +then filter value is calculated as 0x80001. + +Note that multiple Root Ports can be specified at one time, but only one +Endpoint function can be specified in one trace. Specifying both Root Port +and function at the same time is not supported. Driver maintains a list of +available filters and will check the invalid inputs. + +Currently the available filters are detected in driver's probe. If the supported +devices are removed/added after probe, you may need to reload the driver to update +the filters. + +2. Type +------- + +You can trace the TLP headers of certain types by specifying the `type` +parameter, which is required to start the trace. The parameter value is +8 bit. Current supported types and related values are shown below: + +- 8'b00000001: posted requests (P) +- 8'b00000010: non-posted requests (NP) +- 8'b00000100: completions (CPL) + +You can specify multiple types when tracing inbound TLP headers, but can only +specify one when tracing outbound TLP headers. + +3. Direction +------------ + +You can trace the TLP headers from certain direction, which is relative +to the Root Port or the PCIe core, by specifying the `direction` parameter. +This is optional and the default parameter is inbound. The parameter value +is 4 bit. When the desired format is 4DW, directions and related values +supported are shown below: + +- 4'b0000: inbound TLPs (P, NP, CPL) +- 4'b0001: outbound TLPs (P, NP, CPL) +- 4'b0010: outbound TLPs (P, NP, CPL) and inbound TLPs (P, NP, CPL B) +- 4'b0011: outbound TLPs (P, NP, CPL) and inbound TLPs (CPL A) + +When the desired format is 8DW, directions and related values supported are +shown below: + +- 4'b0000: reserved +- 4'b0001: outbound TLPs (P, NP, CPL) +- 4'b0010: inbound TLPs (P, NP, CPL B) +- 4'b0011: inbound TLPs (CPL A) + +Inbound completions are classified into two types: + +- completion A (CPL A): completion of CHI/DMA/Native non-posted requests, except for CPL B +- completion B (CPL B): completion of DMA remote2local and P2P non-posted requests + +4. Format +-------------- + +You can change the format of the traced TLP headers by specifying the +`format` parameter. The default format is 4DW. The parameter value is 4 bit. +Current supported formats and related values are shown below: + +- 4'b0000: 4DW length per TLP header +- 4'b0001: 8DW length per TLP header + +The traced TLP header format is different from the PCIe standard. + +When using the 8DW data format, the entire TLP header is logged +(Header DW0-3 shown below). For example, the TLP header for Memory +Reads with 64-bit addresses is shown in PCIe r5.0, Figure 2-17; +the header for Configuration Requests is shown in Figure 2.20, etc. + +In addition, 8DW trace buffer entries contain a timestamp and +possibly a prefix for a PASID TLP prefix (see Figure 6-20, PCIe r5.0). +Otherwise this field will be all 0. + +The bit[31:11] of DW0 is always 0x1fffff, which can be +used to distinguish the data format. 8DW format is like +:: + + bits [ 31:11 ][ 10:0 ] + |---------------------------------------|-------------------| + DW0 [ 0x1fffff ][ Reserved (0x7ff) ] + DW1 [ Prefix ] + DW2 [ Header DW0 ] + DW3 [ Header DW1 ] + DW4 [ Header DW2 ] + DW5 [ Header DW3 ] + DW6 [ Reserved (0x0) ] + DW7 [ Time ] + +When using the 4DW data format, DW0 of the trace buffer entry +contains selected fields of DW0 of the TLP, together with a +timestamp. DW1-DW3 of the trace buffer entry contain DW1-DW3 +directly from the TLP header. + +4DW format is like +:: + + bits [31:30] [ 29:25 ][24][23][22][21][ 20:11 ][ 10:0 ] + |-----|---------|---|---|---|---|-------------|-------------| + DW0 [ Fmt ][ Type ][T9][T8][TH][SO][ Length ][ Time ] + DW1 [ Header DW1 ] + DW2 [ Header DW2 ] + DW3 [ Header DW3 ] + +5. Memory Management +-------------------- + +The traced TLP headers will be written to the memory allocated +by the driver. The hardware accepts 4 DMA address with same size, +and writes the buffer sequentially like below. If DMA addr 3 is +finished and the trace is still on, it will return to addr 0. +:: + + +->[DMA addr 0]->[DMA addr 1]->[DMA addr 2]->[DMA addr 3]-+ + +---------------------------------------------------------+ + +Driver will allocate each DMA buffer of 4MiB. The finished buffer +will be copied to the perf AUX buffer allocated by the perf core. +Once the AUX buffer is full while the trace is still on, driver +will commit the AUX buffer first and then apply for a new one with +the same size. The size of AUX buffer is default to 16MiB. User can +adjust the size by specifying the `-m` parameter of the perf command. + +6. Decoding +----------- + +You can decode the traced data with `perf report -D` command (currently +only support to dump the raw trace data). The traced data will be decoded +according to the format described previously (take 8DW as an example): +:: + + [...perf headers and other information] + . ... HISI PTT data: size 4194304 bytes + . 00000000: 00 00 00 00 Prefix + . 00000004: 01 00 00 60 Header DW0 + . 00000008: 0f 1e 00 01 Header DW1 + . 0000000c: 04 00 00 00 Header DW2 + . 00000010: 40 00 81 02 Header DW3 + . 00000014: 33 c0 04 00 Time + . 00000020: 00 00 00 00 Prefix + . 00000024: 01 00 00 60 Header DW0 + . 00000028: 0f 1e 00 01 Header DW1 + . 0000002c: 04 00 00 00 Header DW2 + . 00000030: 40 00 81 02 Header DW3 + . 00000034: 02 00 00 00 Time + . 00000040: 00 00 00 00 Prefix + . 00000044: 01 00 00 60 Header DW0 + . 00000048: 0f 1e 00 01 Header DW1 + . 0000004c: 04 00 00 00 Header DW2 + . 00000050: 40 00 81 02 Header DW3 + [...] diff --git a/Documentation/trace/index.rst b/Documentation/trace/index.rst index 2d73e8697523..ea25a9220f92 100644 --- a/Documentation/trace/index.rst +++ b/Documentation/trace/index.rst @@ -33,3 +33,4 @@ Linux Tracing Technologies coresight/index user_events rv/index + hisi-ptt diff --git a/MAINTAINERS b/MAINTAINERS index f37a0360c76c..2bfeb7462bc3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -618,7 +618,7 @@ ADXL367 THREE-AXIS DIGITAL ACCELEROMETER DRIVER M: Cosmin Tanislav <cosmin.tanislav@analog.com> L: linux-iio@vger.kernel.org S: Supported -W: http://ez.analog.com/community/linux-device-drivers +W: https://ez.analog.com/linux-software-drivers F: Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml F: drivers/iio/accel/adxl367* @@ -759,14 +759,6 @@ L: Dell.Client.Kernel@dell.com S: Maintained F: drivers/platform/x86/dell/alienware-wmi.c -ALL SENSORS DLH SERIES PRESSURE SENSORS DRIVER -M: Tomislav Denis <tomislav.denis@avl.com> -L: linux-iio@vger.kernel.org -S: Maintained -W: http://www.allsensors.com/ -F: Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml -F: drivers/iio/pressure/dlhl60d.c - ALLEGRO DVT VIDEO IP CORE DRIVER M: Michael Tretter <m.tretter@pengutronix.de> R: Pengutronix Kernel Team <kernel@pengutronix.de> @@ -1178,7 +1170,7 @@ ANALOG DEVICES INC AD74413R DRIVER M: Cosmin Tanislav <cosmin.tanislav@analog.com> L: linux-iio@vger.kernel.org S: Supported -W: http://ez.analog.com/community/linux-device-drivers +W: https://ez.analog.com/linux-software-drivers F: Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml F: drivers/iio/addac/ad74413r.c F: include/dt-bindings/iio/addac/adi,ad74413r.h @@ -1353,7 +1345,8 @@ W: https://ez.analog.com/linux-software-drivers F: Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523 F: Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350 F: Documentation/devicetree/bindings/iio/*/adi,* -F: Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml +F: Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml +F: Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml F: drivers/iio/*/ad* F: drivers/iio/adc/ltc249* F: drivers/iio/amplifiers/hmc425a.c @@ -1417,7 +1410,7 @@ APEX EMBEDDED SYSTEMS STX104 IIO DRIVER M: William Breathitt Gray <william.gray@linaro.org> L: linux-iio@vger.kernel.org S: Maintained -F: drivers/iio/adc/stx104.c +F: drivers/iio/addac/stx104.c APM DRIVER M: Jiri Kosina <jikos@kernel.org> @@ -5323,7 +5316,7 @@ COUNTER SUBSYSTEM M: William Breathitt Gray <william.gray@linaro.org> L: linux-iio@vger.kernel.org S: Maintained -T: git https://git.linaro.org/people/william.gray/counter.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter.git F: Documentation/ABI/testing/sysfs-bus-counter F: Documentation/driver-api/generic-counter.rst F: drivers/counter/ @@ -8915,6 +8908,7 @@ T: git https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux.git F: Documentation/ABI/testing/debugfs-driver-habanalabs F: Documentation/ABI/testing/sysfs-driver-habanalabs F: drivers/misc/habanalabs/ +F: include/trace/events/habanalabs.h F: include/uapi/misc/habanalabs.h HACKRF MEDIA DRIVER @@ -9230,6 +9224,14 @@ S: Supported F: Documentation/admin-guide/perf/hns3-pmu.rst F: drivers/perf/hisilicon/hns3_pmu.c +HISILICON PTT DRIVER +M: Yicong Yang <yangyicong@hisilicon.com> +L: linux-kernel@vger.kernel.org +S: Maintained +F: Documentation/ABI/testing/sysfs-devices-hisi_ptt +F: Documentation/trace/hisi-ptt.rst +F: drivers/hwtracing/ptt/ + HISILICON QM DRIVER M: Weili Qian <qianweili@huawei.com> M: Zhou Wang <wangzhou1@hisilicon.com> @@ -11680,6 +11682,7 @@ F: Documentation/process/license-rules.rst F: LICENSES/ F: scripts/spdxcheck-test.sh F: scripts/spdxcheck.py +F: scripts/spdxexclude LINEAR RANGES HELPERS M: Mark Brown <broonie@kernel.org> @@ -11978,7 +11981,7 @@ LTC2688 IIO DAC DRIVER M: Nuno Sá <nuno.sa@analog.com> L: linux-iio@vger.kernel.org S: Supported -W: http://ez.analog.com/community/linux-device-drivers +W: https://ez.analog.com/linux-software-drivers F: Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688 F: Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml F: drivers/iio/dac/ltc2688.c @@ -12395,6 +12398,14 @@ S: Maintained F: Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.yaml F: drivers/iio/proximity/mb1232.c +MAXIM MAX11205 DRIVER +M: Ramona Bolboaca <ramona.bolboaca@analog.com> +L: linux-iio@vger.kernel.org +S: Supported +W: https://ez.analog.com/linux-software-drivers +F: Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml +F: drivers/iio/adc/max11205.c + MAXIM MAX17040 FAMILY FUEL GAUGE DRIVERS R: Iskren Chernev <iskren.chernev@gmail.com> R: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> @@ -13237,6 +13248,13 @@ F: drivers/mtd/ F: include/linux/mtd/ F: include/uapi/mtd/ +MEMSENSING MICROSYSTEMS MSA311 DRIVER +M: Dmitry Rokosov <ddrokosov@sberdevices.ru> +L: linux-iio@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml +F: drivers/iio/accel/msa311.c + MEN A21 WATCHDOG DRIVER M: Johannes Thumshirn <morbidrsa@gmail.com> L: linux-watchdog@vger.kernel.org @@ -13458,7 +13476,7 @@ MICROCHIP MCP3911 ADC DRIVER M: Marcus Folkesson <marcus.folkesson@gmail.com> M: Kent Gustavsson <kent@minoris.se> L: linux-iio@vger.kernel.org -S: Supported +S: Maintained F: Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml F: drivers/iio/adc/mcp3911.c @@ -13474,6 +13492,14 @@ S: Supported F: Documentation/devicetree/bindings/mtd/atmel-nand.txt F: drivers/mtd/nand/raw/atmel/* +MICROCHIP PCI1XXXX GP DRIVER +M: Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com> +L: linux-gpio@vger.kernel.org +S: Supported +F: drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c +F: drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.h +F: drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gpio.c + MICROCHIP OTPC DRIVER M: Claudiu Beznea <claudiu.beznea@microchip.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -20385,13 +20411,6 @@ M: Robert Richter <rric@kernel.org> S: Odd Fixes F: drivers/gpio/gpio-thunderx.c -TI ADS131E0X ADC SERIES DRIVER -M: Tomislav Denis <tomislav.denis@avl.com> -L: linux-iio@vger.kernel.org -S: Maintained -F: Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml -F: drivers/iio/adc/ti-ads131e08.c - TI AM437X VPFE DRIVER M: "Lad, Prabhakar" <prabhakar.csengg@gmail.com> L: linux-media@vger.kernel.org @@ -20462,6 +20481,15 @@ F: drivers/media/platform/ti/davinci/ F: drivers/staging/media/deprecated/vpfe_capture/ F: include/media/davinci/ +TI ENHANCED CAPTURE (eCAP) DRIVER +M: Vignesh Raghavendra <vigneshr@ti.com> +R: Julien Panis <jpanis@baylibre.com> +L: linux-iio@vger.kernel.org +L: linux-omap@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml +F: drivers/counter/ti-ecap-capture.c + TI ENHANCED QUADRATURE ENCODER PULSE (eQEP) DRIVER R: David Lechner <david@lechnology.com> L: linux-iio@vger.kernel.org @@ -20880,6 +20908,7 @@ U-BOOT ENVIRONMENT VARIABLES M: RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> S: Maintained F: Documentation/devicetree/bindings/nvmem/u-boot,env.yaml +F: drivers/nvmem/u-boot-env.c UACCE ACCELERATOR FRAMEWORK M: Zhangfei Gao <zhangfei.gao@linaro.org> @@ -21827,7 +21856,7 @@ VMWARE BALLOON DRIVER M: Nadav Amit <namit@vmware.com> R: VMware PV-Drivers Reviewers <pv-drivers@vmware.com> L: linux-kernel@vger.kernel.org -S: Maintained +S: Supported F: drivers/misc/vmw_balloon.c VMWARE HYPERVISOR INTERFACE @@ -21846,14 +21875,14 @@ M: Bryan Tan <bryantan@vmware.com> M: Vishnu Dasa <vdasa@vmware.com> R: VMware PV-Drivers Reviewers <pv-drivers@vmware.com> L: linux-rdma@vger.kernel.org -S: Maintained +S: Supported F: drivers/infiniband/hw/vmw_pvrdma/ -VMware PVSCSI driver +VMWARE PVSCSI DRIVER M: Vishal Bhakta <vbhakta@vmware.com> R: VMware PV-Drivers Reviewers <pv-drivers@vmware.com> L: linux-scsi@vger.kernel.org -S: Maintained +S: Supported F: drivers/scsi/vmw_pvscsi.c F: drivers/scsi/vmw_pvscsi.h @@ -21866,19 +21895,19 @@ F: drivers/ptp/ptp_vmw.c VMWARE VMCI DRIVER M: Bryan Tan <bryantan@vmware.com> -M: Rajesh Jalisatgi <rjalisatgi@vmware.com> M: Vishnu Dasa <vdasa@vmware.com> R: VMware PV-Drivers Reviewers <pv-drivers@vmware.com> L: linux-kernel@vger.kernel.org -S: Maintained +S: Supported F: drivers/misc/vmw_vmci/ +F: include/linux/vmw_vmci* VMWARE VMMOUSE SUBDRIVER M: Zack Rusin <zackr@vmware.com> R: VMware Graphics Reviewers <linux-graphics-maintainer@vmware.com> R: VMware PV-Drivers Reviewers <pv-drivers@vmware.com> L: linux-input@vger.kernel.org -S: Maintained +S: Supported F: drivers/input/mouse/vmmouse.c F: drivers/input/mouse/vmmouse.h @@ -21886,9 +21915,17 @@ VMWARE VMXNET3 ETHERNET DRIVER M: Ronak Doshi <doshir@vmware.com> R: VMware PV-Drivers Reviewers <pv-drivers@vmware.com> L: netdev@vger.kernel.org -S: Maintained +S: Supported F: drivers/net/vmxnet3/ +VMWARE VSOCK VMCI TRANSPORT DRIVER +M: Bryan Tan <bryantan@vmware.com> +M: Vishnu Dasa <vdasa@vmware.com> +R: VMware PV-Drivers Reviewers <pv-drivers@vmware.com> +L: linux-kernel@vger.kernel.org +S: Supported +F: net/vmw_vsock/vmci_transport* + VOCORE VOCORE2 BOARD M: Harvey Hunt <harveyhuntnexus@gmail.com> L: linux-mips@vger.kernel.org diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 23003a43ffe9..54a6dc0aa5a4 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -1189,11 +1189,11 @@ CONFIG_TI_PIPE3=y CONFIG_TWL4030_USB=m CONFIG_RAS=y CONFIG_NVMEM_IMX_OCOTP=y -CONFIG_QCOM_QFPROM=y -CONFIG_ROCKCHIP_EFUSE=m +CONFIG_NVMEM_QCOM_QFPROM=y +CONFIG_NVMEM_ROCKCHIP_EFUSE=m CONFIG_NVMEM_SUNXI_SID=y CONFIG_NVMEM_VF610_OCOTP=y -CONFIG_MESON_MX_EFUSE=m +CONFIG_NVMEM_MESON_MX_EFUSE=m CONFIG_NVMEM_RMEM=m CONFIG_FSI=m CONFIG_FSI_MASTER_GPIO=m diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index 0afa62b92de7..7d8b6884fd00 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -283,7 +283,7 @@ CONFIG_PHY_QCOM_QMP=y CONFIG_PHY_QCOM_USB_HS=y CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=y CONFIG_PHY_QCOM_USB_HSIC=y -CONFIG_QCOM_QFPROM=y +CONFIG_NVMEM_QCOM_QFPROM=y CONFIG_INTERCONNECT=y CONFIG_INTERCONNECT_QCOM=y CONFIG_INTERCONNECT_QCOM_MSM8974=m diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 7b49c80286be..d31545cc145b 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -1268,12 +1268,12 @@ CONFIG_QCOM_L3_PMU=y CONFIG_HISI_PMU=y CONFIG_NVMEM_IMX_OCOTP=y CONFIG_NVMEM_IMX_OCOTP_SCU=y -CONFIG_MTK_EFUSE=y -CONFIG_QCOM_QFPROM=y -CONFIG_ROCKCHIP_EFUSE=y +CONFIG_NVMEM_MTK_EFUSE=y +CONFIG_NVMEM_QCOM_QFPROM=y +CONFIG_NVMEM_ROCKCHIP_EFUSE=y CONFIG_NVMEM_SUNXI_SID=y -CONFIG_UNIPHIER_EFUSE=y -CONFIG_MESON_EFUSE=m +CONFIG_NVMEM_UNIPHIER_EFUSE=y +CONFIG_NVMEM_MESON_EFUSE=m CONFIG_NVMEM_RMEM=m CONFIG_NVMEM_LAYERSCAPE_SFP=m CONFIG_FPGA=y diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h index debc1c0b2b7f..7d301700d1a9 100644 --- a/arch/arm64/include/asm/sysreg.h +++ b/arch/arm64/include/asm/sysreg.h @@ -865,6 +865,7 @@ #define SYS_MPIDR_SAFE_VAL (BIT(31)) #define TRFCR_ELx_TS_SHIFT 5 +#define TRFCR_ELx_TS_MASK ((0x3UL) << TRFCR_ELx_TS_SHIFT) #define TRFCR_ELx_TS_VIRTUAL ((0x1UL) << TRFCR_ELx_TS_SHIFT) #define TRFCR_ELx_TS_GUEST_PHYSICAL ((0x2UL) << TRFCR_ELx_TS_SHIFT) #define TRFCR_ELx_TS_PHYSICAL ((0x3UL) << TRFCR_ELx_TS_SHIFT) diff --git a/arch/mips/configs/ci20_defconfig b/arch/mips/configs/ci20_defconfig index cc69b215854e..e1b49f77414a 100644 --- a/arch/mips/configs/ci20_defconfig +++ b/arch/mips/configs/ci20_defconfig @@ -143,7 +143,7 @@ CONFIG_MEMORY=y CONFIG_JZ4780_NEMC=y CONFIG_PWM=y CONFIG_PWM_JZ4740=m -CONFIG_JZ4780_EFUSE=y +CONFIG_NVMEM_JZ4780_EFUSE=y CONFIG_JZ4770_PHY=y CONFIG_EXT4_FS=y # CONFIG_DNOTIFY is not set diff --git a/drivers/Makefile b/drivers/Makefile index 057857258bfd..bdf1c66141c9 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -175,6 +175,7 @@ obj-$(CONFIG_USB4) += thunderbolt/ obj-$(CONFIG_CORESIGHT) += hwtracing/coresight/ obj-y += hwtracing/intel_th/ obj-$(CONFIG_STM) += hwtracing/stm/ +obj-$(CONFIG_HISI_PTT) += hwtracing/ptt/ obj-y += android/ obj-$(CONFIG_NVMEM) += nvmem/ obj-$(CONFIG_FPGA) += fpga/ diff --git a/drivers/accessibility/speakup/speakup_dummy.c b/drivers/accessibility/speakup/speakup_dummy.c index 34f11cd47073..56419dbb28d3 100644 --- a/drivers/accessibility/speakup/speakup_dummy.c +++ b/drivers/accessibility/speakup/speakup_dummy.c @@ -27,6 +27,7 @@ static struct var_t vars[] = { { INFLECTION, .u.n = {"INFLECTION %d\n", 8, 0, 16, 0, 0, NULL } }, { VOL, .u.n = {"VOL %d\n", 8, 0, 16, 0, 0, NULL } }, { TONE, .u.n = {"TONE %d\n", 8, 0, 16, 0, 0, NULL } }, + { PUNCT, .u.n = {"PUNCT %d\n", 0, 0, 3, 0, 0, NULL } }, { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } }, V_LAST_VAR }; @@ -42,6 +43,8 @@ static struct kobj_attribute pitch_attribute = __ATTR(pitch, 0644, spk_var_show, spk_var_store); static struct kobj_attribute inflection_attribute = __ATTR(inflection, 0644, spk_var_show, spk_var_store); +static struct kobj_attribute punct_attribute = + __ATTR(punct, 0644, spk_var_show, spk_var_store); static struct kobj_attribute rate_attribute = __ATTR(rate, 0644, spk_var_show, spk_var_store); static struct kobj_attribute tone_attribute = @@ -69,6 +72,7 @@ static struct attribute *synth_attrs[] = { &caps_stop_attribute.attr, &pitch_attribute.attr, &inflection_attribute.attr, + &punct_attribute.attr, &rate_attribute.attr, &tone_attribute.attr, &vol_attribute.attr, diff --git a/drivers/accessibility/speakup/speakup_soft.c b/drivers/accessibility/speakup/speakup_soft.c index 99f1d4ac426a..28c8f60370cf 100644 --- a/drivers/accessibility/speakup/speakup_soft.c +++ b/drivers/accessibility/speakup/speakup_soft.c @@ -26,6 +26,7 @@ static int softsynth_probe(struct spk_synth *synth); static void softsynth_release(struct spk_synth *synth); static int softsynth_is_alive(struct spk_synth *synth); +static int softsynth_adjust(struct spk_synth *synth, struct st_var_header *var); static unsigned char get_index(struct spk_synth *synth); static struct miscdevice synth_device, synthu_device; @@ -33,6 +34,9 @@ static int init_pos; static int misc_registered; static struct var_t vars[] = { + /* DIRECT is put first so that module_param_named can access it easily */ + { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } }, + { CAPS_START, .u.s = {"\x01+3p" } }, { CAPS_STOP, .u.s = {"\x01-3p" } }, { PAUSE, .u.n = {"\x01P" } }, @@ -41,10 +45,9 @@ static struct var_t vars[] = { { INFLECTION, .u.n = {"\x01%dr", 5, 0, 9, 0, 0, NULL } }, { VOL, .u.n = {"\x01%dv", 5, 0, 9, 0, 0, NULL } }, { TONE, .u.n = {"\x01%dx", 1, 0, 2, 0, 0, NULL } }, - { PUNCT, .u.n = {"\x01%db", 0, 0, 2, 0, 0, NULL } }, + { PUNCT, .u.n = {"\x01%db", 0, 0, 3, 0, 0, NULL } }, { VOICE, .u.n = {"\x01%do", 0, 0, 7, 0, 0, NULL } }, { FREQUENCY, .u.n = {"\x01%df", 5, 0, 9, 0, 0, NULL } }, - { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } }, V_LAST_VAR }; @@ -133,7 +136,7 @@ static struct spk_synth synth_soft = { .catch_up = NULL, .flush = NULL, .is_alive = softsynth_is_alive, - .synth_adjust = NULL, + .synth_adjust = softsynth_adjust, .read_buff_add = NULL, .get_index = get_index, .indexing = { @@ -426,9 +429,32 @@ static int softsynth_is_alive(struct spk_synth *synth) return 0; } +static int softsynth_adjust(struct spk_synth *synth, struct st_var_header *var) +{ + struct st_var_header *punc_level_var; + struct var_t *var_data; + + if (var->var_id != PUNC_LEVEL) + return 0; + + /* We want to set the the speech synthesis punctuation level + * accordingly, so it properly tunes speaking A_PUNC characters */ + var_data = var->data; + if (!var_data) + return 0; + punc_level_var = spk_get_var_header(PUNCT); + if (!punc_level_var) + return 0; + spk_set_num_var(var_data->u.n.value, punc_level_var, E_SET); + + return 1; +} + module_param_named(start, synth_soft.startup, short, 0444); +module_param_named(direct, vars[0].u.n.default_val, int, 0444); MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded."); +MODULE_PARM_DESC(direct, "Set the direct variable on load."); module_spk_synth(synth_soft); diff --git a/drivers/accessibility/speakup/spk_types.h b/drivers/accessibility/speakup/spk_types.h index 6a96ad94bc3f..3a14d39bf896 100644 --- a/drivers/accessibility/speakup/spk_types.h +++ b/drivers/accessibility/speakup/spk_types.h @@ -195,7 +195,7 @@ struct spk_synth { void (*catch_up)(struct spk_synth *synth); void (*flush)(struct spk_synth *synth); int (*is_alive)(struct spk_synth *synth); - int (*synth_adjust)(struct st_var_header *var); + int (*synth_adjust)(struct spk_synth *synth, struct st_var_header *var); void (*read_buff_add)(u_char c); unsigned char (*get_index)(struct spk_synth *synth); struct synth_indexing indexing; diff --git a/drivers/accessibility/speakup/varhandlers.c b/drivers/accessibility/speakup/varhandlers.c index 067c0da97dcb..e1c9f42e39f0 100644 --- a/drivers/accessibility/speakup/varhandlers.c +++ b/drivers/accessibility/speakup/varhandlers.c @@ -138,6 +138,7 @@ struct st_var_header *spk_get_var_header(enum var_id_t var_id) return NULL; return p_header; } +EXPORT_SYMBOL_GPL(spk_get_var_header); struct st_var_header *spk_var_header_by_name(const char *name) { @@ -221,15 +222,17 @@ int spk_set_num_var(int input, struct st_var_header *var, int how) *p_val = val; if (var->var_id == PUNC_LEVEL) { spk_punc_mask = spk_punc_masks[val]; - return 0; } if (var_data->u.n.multiplier != 0) val *= var_data->u.n.multiplier; val += var_data->u.n.offset; - if (var->var_id < FIRST_SYNTH_VAR || !synth) + + if (!synth) + return 0; + if (synth->synth_adjust && synth->synth_adjust(synth, var)) + return 0; + if (var->var_id < FIRST_SYNTH_VAR) return 0; - if (synth->synth_adjust) - return synth->synth_adjust(var); if (!var_data->u.n.synth_fmt) return 0; @@ -245,6 +248,7 @@ int spk_set_num_var(int input, struct st_var_header *var, int how) synth_printf("%s", cp); return 0; } +EXPORT_SYMBOL_GPL(spk_set_num_var); int spk_set_string_var(const char *page, struct st_var_header *var, int len) { diff --git a/drivers/android/binder_alloc.c b/drivers/android/binder_alloc.c index 9b1778c00610..1c39cfce32fa 100644 --- a/drivers/android/binder_alloc.c +++ b/drivers/android/binder_alloc.c @@ -208,8 +208,8 @@ static int binder_update_page_range(struct binder_alloc *alloc, int allocate, } } - if (need_mm && mmget_not_zero(alloc->vma_vm_mm)) - mm = alloc->vma_vm_mm; + if (need_mm && mmget_not_zero(alloc->mm)) + mm = alloc->mm; if (mm) { mmap_read_lock(mm); @@ -309,34 +309,13 @@ err_no_vma: return vma ? -ENOMEM : -ESRCH; } - -static inline void binder_alloc_set_vma(struct binder_alloc *alloc, - struct vm_area_struct *vma) -{ - unsigned long vm_start = 0; - - /* - * Allow clearing the vma with holding just the read lock to allow - * munmapping downgrade of the write lock before freeing and closing the - * file using binder_alloc_vma_close(). - */ - if (vma) { - vm_start = vma->vm_start; - mmap_assert_write_locked(alloc->vma_vm_mm); - } else { - mmap_assert_locked(alloc->vma_vm_mm); - } - - alloc->vma_addr = vm_start; -} - static inline struct vm_area_struct *binder_alloc_get_vma( struct binder_alloc *alloc) { struct vm_area_struct *vma = NULL; if (alloc->vma_addr) - vma = vma_lookup(alloc->vma_vm_mm, alloc->vma_addr); + vma = vma_lookup(alloc->mm, alloc->vma_addr); return vma; } @@ -401,15 +380,15 @@ static struct binder_buffer *binder_alloc_new_buf_locked( size_t size, data_offsets_size; int ret; - mmap_read_lock(alloc->vma_vm_mm); + mmap_read_lock(alloc->mm); if (!binder_alloc_get_vma(alloc)) { - mmap_read_unlock(alloc->vma_vm_mm); + mmap_read_unlock(alloc->mm); binder_alloc_debug(BINDER_DEBUG_USER_ERROR, "%d: binder_alloc_buf, no vma\n", alloc->pid); return ERR_PTR(-ESRCH); } - mmap_read_unlock(alloc->vma_vm_mm); + mmap_read_unlock(alloc->mm); data_offsets_size = ALIGN(data_size, sizeof(void *)) + ALIGN(offsets_size, sizeof(void *)); @@ -793,7 +772,7 @@ int binder_alloc_mmap_handler(struct binder_alloc *alloc, buffer->free = 1; binder_insert_free_buffer(alloc, buffer); alloc->free_async_space = alloc->buffer_size / 2; - binder_alloc_set_vma(alloc, vma); + alloc->vma_addr = vma->vm_start; return 0; @@ -823,7 +802,7 @@ void binder_alloc_deferred_release(struct binder_alloc *alloc) buffers = 0; mutex_lock(&alloc->mutex); BUG_ON(alloc->vma_addr && - vma_lookup(alloc->vma_vm_mm, alloc->vma_addr)); + vma_lookup(alloc->mm, alloc->vma_addr)); while ((n = rb_first(&alloc->allocated_buffers))) { buffer = rb_entry(n, struct binder_buffer, rb_node); @@ -873,8 +852,8 @@ void binder_alloc_deferred_release(struct binder_alloc *alloc) kfree(alloc->pages); } mutex_unlock(&alloc->mutex); - if (alloc->vma_vm_mm) - mmdrop(alloc->vma_vm_mm); + if (alloc->mm) + mmdrop(alloc->mm); binder_alloc_debug(BINDER_DEBUG_OPEN_CLOSE, "%s: %d buffers %d, pages %d\n", @@ -931,13 +910,13 @@ void binder_alloc_print_pages(struct seq_file *m, * read inconsistent state. */ - mmap_read_lock(alloc->vma_vm_mm); + mmap_read_lock(alloc->mm); if (binder_alloc_get_vma(alloc) == NULL) { - mmap_read_unlock(alloc->vma_vm_mm); + mmap_read_unlock(alloc->mm); goto uninitialized; } - mmap_read_unlock(alloc->vma_vm_mm); + mmap_read_unlock(alloc->mm); for (i = 0; i < alloc->buffer_size / PAGE_SIZE; i++) { page = &alloc->pages[i]; if (!page->page_ptr) @@ -983,7 +962,7 @@ int binder_alloc_get_allocated_count(struct binder_alloc *alloc) */ void binder_alloc_vma_close(struct binder_alloc *alloc) { - binder_alloc_set_vma(alloc, NULL); + alloc->vma_addr = 0; } /** @@ -1020,7 +999,7 @@ enum lru_status binder_alloc_free_page(struct list_head *item, index = page - alloc->pages; page_addr = (uintptr_t)alloc->buffer + index * PAGE_SIZE; - mm = alloc->vma_vm_mm; + mm = alloc->mm; if (!mmget_not_zero(mm)) goto err_mmget; if (!mmap_read_trylock(mm)) @@ -1089,8 +1068,8 @@ static struct shrinker binder_shrinker = { void binder_alloc_init(struct binder_alloc *alloc) { alloc->pid = current->group_leader->pid; - alloc->vma_vm_mm = current->mm; - mmgrab(alloc->vma_vm_mm); + alloc->mm = current->mm; + mmgrab(alloc->mm); mutex_init(&alloc->mutex); INIT_LIST_HEAD(&alloc->buffers); } diff --git a/drivers/android/binder_alloc.h b/drivers/android/binder_alloc.h index 1e4fd37af5e0..0f811ac4bcff 100644 --- a/drivers/android/binder_alloc.h +++ b/drivers/android/binder_alloc.h @@ -74,11 +74,10 @@ struct binder_lru_page { /** * struct binder_alloc - per-binder proc state for binder allocator - * @vma: vm_area_struct passed to mmap_handler - * (invarient after mmap) - * @tsk: tid for task that called init for this proc - * (invariant after init) - * @vma_vm_mm: copy of vma->vm_mm (invarient after mmap) + * @mutex: protects binder_alloc fields + * @vma_addr: vm_area_struct->vm_start passed to mmap_handler + * (invariant after mmap) + * @mm: copy of task->mm (invariant after open) * @buffer: base of per-proc address space mapped via mmap * @buffers: list of all buffers for this proc * @free_buffers: rb tree of buffers available for allocation @@ -101,7 +100,7 @@ struct binder_lru_page { struct binder_alloc { struct mutex mutex; unsigned long vma_addr; - struct mm_struct *vma_vm_mm; + struct mm_struct *mm; void __user *buffer; struct list_head buffers; struct rb_root free_buffers; @@ -109,7 +108,6 @@ struct binder_alloc { size_t free_async_space; struct binder_lru_page *pages; size_t buffer_size; - uint32_t buffer_free; int pid; size_t pages_high; bool oneway_spam_detected; diff --git a/drivers/android/binderfs.c b/drivers/android/binderfs.c index 588d753a7a19..09b2ce7e4c34 100644 --- a/drivers/android/binderfs.c +++ b/drivers/android/binderfs.c @@ -39,7 +39,6 @@ #define FIRST_INODE 1 #define SECOND_INODE 2 #define INODE_OFFSET 3 -#define INTSTRLEN 21 #define BINDERFS_MAX_MINOR (1U << MINORBITS) /* Ensure that the initial ipc namespace always has devices available. */ #define BINDERFS_MAX_MINOR_CAPPED (BINDERFS_MAX_MINOR - 4) @@ -340,22 +339,10 @@ static int binderfs_show_options(struct seq_file *seq, struct dentry *root) return 0; } -static void binderfs_put_super(struct super_block *sb) -{ - struct binderfs_info *info = sb->s_fs_info; - - if (info && info->ipc_ns) - put_ipc_ns(info->ipc_ns); - - kfree(info); - sb->s_fs_info = NULL; -} - static const struct super_operations binderfs_super_ops = { .evict_inode = binderfs_evict_inode, .show_options = binderfs_show_options, .statfs = simple_statfs, - .put_super = binderfs_put_super, }; static inline bool is_binderfs_control_device(const struct dentry *dentry) @@ -785,11 +772,27 @@ static int binderfs_init_fs_context(struct fs_context *fc) return 0; } +static void binderfs_kill_super(struct super_block *sb) +{ + struct binderfs_info *info = sb->s_fs_info; + + /* + * During inode eviction struct binderfs_info is needed. + * So first wipe the super_block then free struct binderfs_info. + */ + kill_litter_super(sb); + + if (info && info->ipc_ns) + put_ipc_ns(info->ipc_ns); + + kfree(info); +} + static struct file_system_type binder_fs_type = { .name = "binder", .init_fs_context = binderfs_init_fs_context, .parameters = binderfs_fs_parameters, - .kill_sb = kill_litter_super, + .kill_sb = binderfs_kill_super, .fs_flags = FS_USERNS_MOUNT, }; diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c index fa2246da63c1..caa4ce28cf9e 100644 --- a/drivers/bus/mhi/host/pci_generic.c +++ b/drivers/bus/mhi/host/pci_generic.c @@ -843,7 +843,7 @@ static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) struct mhi_controller *mhi_cntrl; int err; - dev_dbg(&pdev->dev, "MHI PCI device found: %s\n", info->name); + dev_info(&pdev->dev, "MHI PCI device found: %s\n", info->name); /* mhi_pdev.mhi_cntrl must be zero-initialized */ mhi_pdev = devm_kzalloc(&pdev->dev, sizeof(*mhi_pdev), GFP_KERNEL); diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c index 5dc2669432ba..d51573ac525e 100644 --- a/drivers/bus/mvebu-mbus.c +++ b/drivers/bus/mvebu-mbus.c @@ -466,18 +466,7 @@ static int mvebu_sdram_debug_show(struct seq_file *seq, void *v) struct mvebu_mbus_state *mbus = &mbus_state; return mbus->soc->show_cpu_target(mbus, seq, v); } - -static int mvebu_sdram_debug_open(struct inode *inode, struct file *file) -{ - return single_open(file, mvebu_sdram_debug_show, inode->i_private); -} - -static const struct file_operations mvebu_sdram_debug_fops = { - .open = mvebu_sdram_debug_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; +DEFINE_SHOW_ATTRIBUTE(mvebu_sdram_debug); static int mvebu_devs_debug_show(struct seq_file *seq, void *v) { @@ -516,18 +505,7 @@ static int mvebu_devs_debug_show(struct seq_file *seq, void *v) return 0; } - -static int mvebu_devs_debug_open(struct inode *inode, struct file *file) -{ - return single_open(file, mvebu_devs_debug_show, inode->i_private); -} - -static const struct file_operations mvebu_devs_debug_fops = { - .open = mvebu_devs_debug_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; +DEFINE_SHOW_ATTRIBUTE(mvebu_devs_debug); /* * SoC-specific functions and definitions diff --git a/drivers/comedi/comedi_fops.c b/drivers/comedi/comedi_fops.c index 55a0cae04b8d..e2114bcf815a 100644 --- a/drivers/comedi/comedi_fops.c +++ b/drivers/comedi/comedi_fops.c @@ -396,7 +396,7 @@ static ssize_t max_read_buffer_kb_show(struct device *csdev, mutex_unlock(&dev->mutex); comedi_dev_put(dev); - return snprintf(buf, PAGE_SIZE, "%u\n", size); + return sysfs_emit(buf, "%u\n", size); } static ssize_t max_read_buffer_kb_store(struct device *csdev, @@ -452,7 +452,7 @@ static ssize_t read_buffer_kb_show(struct device *csdev, mutex_unlock(&dev->mutex); comedi_dev_put(dev); - return snprintf(buf, PAGE_SIZE, "%u\n", size); + return sysfs_emit(buf, "%u\n", size); } static ssize_t read_buffer_kb_store(struct device *csdev, @@ -509,7 +509,7 @@ static ssize_t max_write_buffer_kb_show(struct device *csdev, mutex_unlock(&dev->mutex); comedi_dev_put(dev); - return snprintf(buf, PAGE_SIZE, "%u\n", size); + return sysfs_emit(buf, "%u\n", size); } static ssize_t max_write_buffer_kb_store(struct device *csdev, @@ -565,7 +565,7 @@ static ssize_t write_buffer_kb_show(struct device *csdev, mutex_unlock(&dev->mutex); comedi_dev_put(dev); - return snprintf(buf, PAGE_SIZE, "%u\n", size); + return sysfs_emit(buf, "%u\n", size); } static ssize_t write_buffer_kb_store(struct device *csdev, diff --git a/drivers/counter/104-quad-8.c b/drivers/counter/104-quad-8.c index 4407203e0c9b..1188673d8521 100644 --- a/drivers/counter/104-quad-8.c +++ b/drivers/counter/104-quad-8.c @@ -549,6 +549,32 @@ static int quad8_index_polarity_set(struct counter_device *counter, return 0; } +static int quad8_polarity_read(struct counter_device *counter, + struct counter_signal *signal, + enum counter_signal_polarity *polarity) +{ + int err; + u32 index_polarity; + + err = quad8_index_polarity_get(counter, signal, &index_polarity); + if (err) + return err; + + *polarity = (index_polarity) ? COUNTER_SIGNAL_POLARITY_POSITIVE : + COUNTER_SIGNAL_POLARITY_NEGATIVE; + + return 0; +} + +static int quad8_polarity_write(struct counter_device *counter, + struct counter_signal *signal, + enum counter_signal_polarity polarity) +{ + const u32 pol = (polarity == COUNTER_SIGNAL_POLARITY_POSITIVE) ? 1 : 0; + + return quad8_index_polarity_set(counter, signal, pol); +} + static const char *const quad8_synchronous_modes[] = { "non-synchronous", "synchronous" @@ -977,6 +1003,13 @@ static struct counter_comp quad8_signal_ext[] = { quad8_signal_fck_prescaler_write) }; +static const enum counter_signal_polarity quad8_polarities[] = { + COUNTER_SIGNAL_POLARITY_POSITIVE, + COUNTER_SIGNAL_POLARITY_NEGATIVE, +}; + +static DEFINE_COUNTER_AVAILABLE(quad8_polarity_available, quad8_polarities); + static DEFINE_COUNTER_ENUM(quad8_index_pol_enum, quad8_index_polarity_modes); static DEFINE_COUNTER_ENUM(quad8_synch_mode_enum, quad8_synchronous_modes); @@ -984,6 +1017,8 @@ static struct counter_comp quad8_index_ext[] = { COUNTER_COMP_SIGNAL_ENUM("index_polarity", quad8_index_polarity_get, quad8_index_polarity_set, quad8_index_pol_enum), + COUNTER_COMP_POLARITY(quad8_polarity_read, quad8_polarity_write, + quad8_polarity_available), COUNTER_COMP_SIGNAL_ENUM("synchronous_mode", quad8_synchronous_mode_get, quad8_synchronous_mode_set, quad8_synch_mode_enum), @@ -1241,3 +1276,4 @@ module_isa_driver(quad8_driver, num_quad8); MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>"); MODULE_DESCRIPTION("ACCES 104-QUAD-8 driver"); MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(COUNTER); diff --git a/drivers/counter/Kconfig b/drivers/counter/Kconfig index 5edd155f1911..d388bf26f4dc 100644 --- a/drivers/counter/Kconfig +++ b/drivers/counter/Kconfig @@ -101,4 +101,19 @@ config INTEL_QEP To compile this driver as a module, choose M here: the module will be called intel-qep. +config TI_ECAP_CAPTURE + tristate "TI eCAP capture driver" + depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST + depends on HAS_IOMEM + select REGMAP_MMIO + help + Select this option to enable the Texas Instruments Enhanced Capture + (eCAP) driver in input mode. + + It can be used to timestamp events (falling/rising edges) detected + on ECAP input signal. + + To compile this driver as a module, choose M here: the module + will be called ti-ecap-capture. + endif # COUNTER diff --git a/drivers/counter/Makefile b/drivers/counter/Makefile index 8fde6c100ebc..b9a369e0d4fc 100644 --- a/drivers/counter/Makefile +++ b/drivers/counter/Makefile @@ -14,3 +14,4 @@ obj-$(CONFIG_TI_EQEP) += ti-eqep.o obj-$(CONFIG_FTM_QUADDEC) += ftm-quaddec.o obj-$(CONFIG_MICROCHIP_TCB_CAPTURE) += microchip-tcb-capture.o obj-$(CONFIG_INTEL_QEP) += intel-qep.o +obj-$(CONFIG_TI_ECAP_CAPTURE) += ti-ecap-capture.o diff --git a/drivers/counter/counter-chrdev.c b/drivers/counter/counter-chrdev.c index 69d340be9c93..80acdf62794a 100644 --- a/drivers/counter/counter-chrdev.c +++ b/drivers/counter/counter-chrdev.c @@ -40,7 +40,11 @@ struct counter_comp_node { a.signal_u32_read == b.signal_u32_read || \ a.device_u64_read == b.device_u64_read || \ a.count_u64_read == b.count_u64_read || \ - a.signal_u64_read == b.signal_u64_read) + a.signal_u64_read == b.signal_u64_read || \ + a.signal_array_u32_read == b.signal_array_u32_read || \ + a.device_array_u64_read == b.device_array_u64_read || \ + a.count_array_u64_read == b.count_array_u64_read || \ + a.signal_array_u64_read == b.signal_array_u64_read) #define counter_comp_read_is_set(comp) \ (comp.action_read || \ @@ -52,7 +56,11 @@ struct counter_comp_node { comp.signal_u32_read || \ comp.device_u64_read || \ comp.count_u64_read || \ - comp.signal_u64_read) + comp.signal_u64_read || \ + comp.signal_array_u32_read || \ + comp.device_array_u64_read || \ + comp.count_array_u64_read || \ + comp.signal_array_u64_read) static ssize_t counter_chrdev_read(struct file *filp, char __user *buf, size_t len, loff_t *f_ps) @@ -228,6 +236,31 @@ static int counter_disable_events(struct counter_device *const counter) return err; } +static int counter_get_ext(const struct counter_comp *const ext, + const size_t num_ext, const size_t component_id, + size_t *const ext_idx, size_t *const id) +{ + struct counter_array *element; + + *id = 0; + for (*ext_idx = 0; *ext_idx < num_ext; (*ext_idx)++) { + if (*id == component_id) + return 0; + + if (ext->type == COUNTER_COMP_ARRAY) { + element = ext->priv; + + if (component_id - *id < element->length) + return 0; + + *id += element->length; + } else + (*id)++; + } + + return -EINVAL; +} + static int counter_add_watch(struct counter_device *const counter, const unsigned long arg) { @@ -237,6 +270,7 @@ static int counter_add_watch(struct counter_device *const counter, size_t parent, id; struct counter_comp *ext; size_t num_ext; + size_t ext_idx, ext_id; int err = 0; if (copy_from_user(&watch, uwatch, sizeof(watch))) @@ -314,11 +348,11 @@ static int counter_add_watch(struct counter_device *const counter, comp_node.comp.priv = counter->counts[parent].synapses + id; break; case COUNTER_COMPONENT_EXTENSION: - if (id >= num_ext) - return -EINVAL; - id = array_index_nospec(id, num_ext); + err = counter_get_ext(ext, num_ext, id, &ext_idx, &ext_id); + if (err < 0) + return err; - comp_node.comp = ext[id]; + comp_node.comp = ext[ext_idx]; break; default: return -EINVAL; @@ -451,14 +485,56 @@ void counter_chrdev_remove(struct counter_device *const counter) kfifo_free(&counter->events); } +static int counter_get_array_data(struct counter_device *const counter, + const enum counter_scope scope, + void *const parent, + const struct counter_comp *const comp, + const size_t idx, u64 *const value) +{ + const struct counter_array *const element = comp->priv; + u32 value_u32 = 0; + int ret; + + switch (element->type) { + case COUNTER_COMP_SIGNAL_POLARITY: + if (scope != COUNTER_SCOPE_SIGNAL) + return -EINVAL; + ret = comp->signal_array_u32_read(counter, parent, idx, + &value_u32); + *value = value_u32; + return ret; + case COUNTER_COMP_U64: + switch (scope) { + case COUNTER_SCOPE_DEVICE: + return comp->device_array_u64_read(counter, idx, value); + case COUNTER_SCOPE_SIGNAL: + return comp->signal_array_u64_read(counter, parent, idx, + value); + case COUNTER_SCOPE_COUNT: + return comp->count_array_u64_read(counter, parent, idx, + value); + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + static int counter_get_data(struct counter_device *const counter, const struct counter_comp_node *const comp_node, u64 *const value) { const struct counter_comp *const comp = &comp_node->comp; - void *const parent = comp_node->parent; + const enum counter_scope scope = comp_node->component.scope; + const size_t id = comp_node->component.id; + struct counter_signal *const signal = comp_node->parent; + struct counter_count *const count = comp_node->parent; u8 value_u8 = 0; u32 value_u32 = 0; + const struct counter_comp *ext; + size_t num_ext; + size_t ext_idx, ext_id; int ret; if (comp_node->component.type == COUNTER_COMPONENT_NONE) @@ -467,15 +543,15 @@ static int counter_get_data(struct counter_device *const counter, switch (comp->type) { case COUNTER_COMP_U8: case COUNTER_COMP_BOOL: - switch (comp_node->component.scope) { + switch (scope) { case COUNTER_SCOPE_DEVICE: ret = comp->device_u8_read(counter, &value_u8); break; case COUNTER_SCOPE_SIGNAL: - ret = comp->signal_u8_read(counter, parent, &value_u8); + ret = comp->signal_u8_read(counter, signal, &value_u8); break; case COUNTER_SCOPE_COUNT: - ret = comp->count_u8_read(counter, parent, &value_u8); + ret = comp->count_u8_read(counter, count, &value_u8); break; default: return -EINVAL; @@ -487,16 +563,17 @@ static int counter_get_data(struct counter_device *const counter, case COUNTER_COMP_ENUM: case COUNTER_COMP_COUNT_DIRECTION: case COUNTER_COMP_COUNT_MODE: - switch (comp_node->component.scope) { + case COUNTER_COMP_SIGNAL_POLARITY: + switch (scope) { case COUNTER_SCOPE_DEVICE: ret = comp->device_u32_read(counter, &value_u32); break; case COUNTER_SCOPE_SIGNAL: - ret = comp->signal_u32_read(counter, parent, + ret = comp->signal_u32_read(counter, signal, &value_u32); break; case COUNTER_SCOPE_COUNT: - ret = comp->count_u32_read(counter, parent, &value_u32); + ret = comp->count_u32_read(counter, count, &value_u32); break; default: return -EINVAL; @@ -504,21 +581,43 @@ static int counter_get_data(struct counter_device *const counter, *value = value_u32; return ret; case COUNTER_COMP_U64: - switch (comp_node->component.scope) { + switch (scope) { case COUNTER_SCOPE_DEVICE: return comp->device_u64_read(counter, value); case COUNTER_SCOPE_SIGNAL: - return comp->signal_u64_read(counter, parent, value); + return comp->signal_u64_read(counter, signal, value); case COUNTER_SCOPE_COUNT: - return comp->count_u64_read(counter, parent, value); + return comp->count_u64_read(counter, count, value); default: return -EINVAL; } case COUNTER_COMP_SYNAPSE_ACTION: - ret = comp->action_read(counter, parent, comp->priv, - &value_u32); + ret = comp->action_read(counter, count, comp->priv, &value_u32); *value = value_u32; return ret; + case COUNTER_COMP_ARRAY: + switch (scope) { + case COUNTER_SCOPE_DEVICE: + ext = counter->ext; + num_ext = counter->num_ext; + break; + case COUNTER_SCOPE_SIGNAL: + ext = signal->ext; + num_ext = signal->num_ext; + break; + case COUNTER_SCOPE_COUNT: + ext = count->ext; + num_ext = count->num_ext; + break; + default: + return -EINVAL; + } + ret = counter_get_ext(ext, num_ext, id, &ext_idx, &ext_id); + if (ret < 0) + return ret; + + return counter_get_array_data(counter, scope, comp_node->parent, + comp, id - ext_id, value); default: return -EINVAL; } @@ -574,4 +673,4 @@ exit_early: if (copied) wake_up_poll(&counter->events_wait, EPOLLIN); } -EXPORT_SYMBOL_GPL(counter_push_event); +EXPORT_SYMBOL_NS_GPL(counter_push_event, COUNTER); diff --git a/drivers/counter/counter-core.c b/drivers/counter/counter-core.c index 938651f9e9e0..09c77afb33ca 100644 --- a/drivers/counter/counter-core.c +++ b/drivers/counter/counter-core.c @@ -73,7 +73,7 @@ void *counter_priv(const struct counter_device *const counter) return &ch->privdata; } -EXPORT_SYMBOL_GPL(counter_priv); +EXPORT_SYMBOL_NS_GPL(counter_priv, COUNTER); /** * counter_alloc - allocate a counter_device @@ -133,13 +133,13 @@ err_ida_alloc: return NULL; } -EXPORT_SYMBOL_GPL(counter_alloc); +EXPORT_SYMBOL_NS_GPL(counter_alloc, COUNTER); void counter_put(struct counter_device *counter) { put_device(&counter->dev); } -EXPORT_SYMBOL_GPL(counter_put); +EXPORT_SYMBOL_NS_GPL(counter_put, COUNTER); /** * counter_add - complete registration of a counter @@ -166,7 +166,7 @@ int counter_add(struct counter_device *counter) /* implies device_add(dev) */ return cdev_device_add(&counter->chrdev, dev); } -EXPORT_SYMBOL_GPL(counter_add); +EXPORT_SYMBOL_NS_GPL(counter_add, COUNTER); /** * counter_unregister - unregister Counter from the system @@ -188,7 +188,7 @@ void counter_unregister(struct counter_device *const counter) mutex_unlock(&counter->ops_exist_lock); } -EXPORT_SYMBOL_GPL(counter_unregister); +EXPORT_SYMBOL_NS_GPL(counter_unregister, COUNTER); static void devm_counter_release(void *counter) { @@ -223,7 +223,7 @@ struct counter_device *devm_counter_alloc(struct device *dev, size_t sizeof_priv return counter; } -EXPORT_SYMBOL_GPL(devm_counter_alloc); +EXPORT_SYMBOL_NS_GPL(devm_counter_alloc, COUNTER); /** * devm_counter_add - complete registration of a counter @@ -244,7 +244,7 @@ int devm_counter_add(struct device *dev, return devm_add_action_or_reset(dev, devm_counter_release, counter); } -EXPORT_SYMBOL_GPL(devm_counter_add); +EXPORT_SYMBOL_NS_GPL(devm_counter_add, COUNTER); #define COUNTER_DEV_MAX 256 diff --git a/drivers/counter/counter-sysfs.c b/drivers/counter/counter-sysfs.c index 04eac41dad33..b9efe66f9f8d 100644 --- a/drivers/counter/counter-sysfs.c +++ b/drivers/counter/counter-sysfs.c @@ -91,6 +91,11 @@ static const char *const counter_count_mode_str[] = { [COUNTER_COUNT_MODE_MODULO_N] = "modulo-n" }; +static const char *const counter_signal_polarity_str[] = { + [COUNTER_SIGNAL_POLARITY_POSITIVE] = "positive", + [COUNTER_SIGNAL_POLARITY_NEGATIVE] = "negative" +}; + static ssize_t counter_comp_u8_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -201,6 +206,8 @@ static ssize_t counter_comp_u32_show(struct device *dev, return sysfs_emit(buf, "%s\n", counter_count_direction_str[data]); case COUNTER_COMP_COUNT_MODE: return sysfs_emit(buf, "%s\n", counter_count_mode_str[data]); + case COUNTER_COMP_SIGNAL_POLARITY: + return sysfs_emit(buf, "%s\n", counter_signal_polarity_str[data]); default: return sysfs_emit(buf, "%u\n", (unsigned int)data); } @@ -252,6 +259,10 @@ static ssize_t counter_comp_u32_store(struct device *dev, err = counter_find_enum(&data, avail->enums, avail->num_items, buf, counter_count_mode_str); break; + case COUNTER_COMP_SIGNAL_POLARITY: + err = counter_find_enum(&data, avail->enums, avail->num_items, + buf, counter_signal_polarity_str); + break; default: err = kstrtou32(buf, 0, &data); break; @@ -341,6 +352,124 @@ static ssize_t counter_comp_u64_store(struct device *dev, return len; } +static ssize_t counter_comp_array_u32_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + const struct counter_attribute *const a = to_counter_attribute(attr); + struct counter_device *const counter = counter_from_dev(dev); + const struct counter_array *const element = a->comp.priv; + int err; + u32 data = 0; + + if (a->scope != COUNTER_SCOPE_SIGNAL || + element->type != COUNTER_COMP_SIGNAL_POLARITY) + return -EINVAL; + + err = a->comp.signal_array_u32_read(counter, a->parent, element->idx, + &data); + if (err < 0) + return err; + + return sysfs_emit(buf, "%s\n", counter_signal_polarity_str[data]); +} + +static ssize_t counter_comp_array_u32_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + const struct counter_attribute *const a = to_counter_attribute(attr); + struct counter_device *const counter = counter_from_dev(dev); + const struct counter_array *const element = a->comp.priv; + int err; + u32 data = 0; + + if (element->type != COUNTER_COMP_SIGNAL_POLARITY || + a->scope != COUNTER_SCOPE_SIGNAL) + return -EINVAL; + + err = counter_find_enum(&data, element->avail->enums, + element->avail->num_items, buf, + counter_signal_polarity_str); + if (err < 0) + return err; + + err = a->comp.signal_array_u32_write(counter, a->parent, element->idx, + data); + if (err < 0) + return err; + + return len; +} + +static ssize_t counter_comp_array_u64_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + const struct counter_attribute *const a = to_counter_attribute(attr); + struct counter_device *const counter = counter_from_dev(dev); + const struct counter_array *const element = a->comp.priv; + int err; + u64 data = 0; + + switch (a->scope) { + case COUNTER_SCOPE_DEVICE: + err = a->comp.device_array_u64_read(counter, element->idx, + &data); + break; + case COUNTER_SCOPE_SIGNAL: + err = a->comp.signal_array_u64_read(counter, a->parent, + element->idx, &data); + break; + case COUNTER_SCOPE_COUNT: + err = a->comp.count_array_u64_read(counter, a->parent, + element->idx, &data); + break; + default: + return -EINVAL; + } + if (err < 0) + return err; + + return sysfs_emit(buf, "%llu\n", (unsigned long long)data); +} + +static ssize_t counter_comp_array_u64_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + const struct counter_attribute *const a = to_counter_attribute(attr); + struct counter_device *const counter = counter_from_dev(dev); + const struct counter_array *const element = a->comp.priv; + int err; + u64 data = 0; + + err = kstrtou64(buf, 0, &data); + if (err < 0) + return err; + + switch (a->scope) { + case COUNTER_SCOPE_DEVICE: + err = a->comp.device_array_u64_write(counter, element->idx, + data); + break; + case COUNTER_SCOPE_SIGNAL: + err = a->comp.signal_array_u64_write(counter, a->parent, + element->idx, data); + break; + case COUNTER_SCOPE_COUNT: + err = a->comp.count_array_u64_write(counter, a->parent, + element->idx, data); + break; + default: + return -EINVAL; + } + if (err < 0) + return err; + + return len; +} + static ssize_t enums_available_show(const u32 *const enums, const size_t num_enums, const char *const strs[], char *buf) @@ -435,6 +564,7 @@ static int counter_attr_create(struct device *const dev, const enum counter_scope scope, void *const parent) { + const struct counter_array *const array = comp->priv; struct counter_attribute *counter_attr; struct device_attribute *dev_attr; @@ -469,6 +599,7 @@ static int counter_attr_create(struct device *const dev, case COUNTER_COMP_ENUM: case COUNTER_COMP_COUNT_DIRECTION: case COUNTER_COMP_COUNT_MODE: + case COUNTER_COMP_SIGNAL_POLARITY: if (comp->device_u32_read) { dev_attr->attr.mode |= 0444; dev_attr->show = counter_comp_u32_show; @@ -488,6 +619,32 @@ static int counter_attr_create(struct device *const dev, dev_attr->store = counter_comp_u64_store; } break; + case COUNTER_COMP_ARRAY: + switch (array->type) { + case COUNTER_COMP_SIGNAL_POLARITY: + if (comp->signal_array_u32_read) { + dev_attr->attr.mode |= 0444; + dev_attr->show = counter_comp_array_u32_show; + } + if (comp->signal_array_u32_write) { + dev_attr->attr.mode |= 0200; + dev_attr->store = counter_comp_array_u32_store; + } + break; + case COUNTER_COMP_U64: + if (comp->device_array_u64_read) { + dev_attr->attr.mode |= 0444; + dev_attr->show = counter_comp_array_u64_show; + } + if (comp->device_array_u64_write) { + dev_attr->attr.mode |= 0200; + dev_attr->store = counter_comp_array_u64_store; + } + break; + default: + return -EINVAL; + } + break; default: return -EINVAL; } @@ -580,6 +737,95 @@ static int counter_comp_id_attr_create(struct device *const dev, return 0; } +static int counter_ext_attrs_create(struct device *const dev, + struct counter_attribute_group *const group, + const struct counter_comp *const ext, + const enum counter_scope scope, + void *const parent, const size_t id) +{ + int err; + + /* Create main extension attribute */ + err = counter_attr_create(dev, group, ext, scope, parent); + if (err < 0) + return err; + + /* Create extension id attribute */ + return counter_comp_id_attr_create(dev, group, ext->name, id); +} + +static int counter_array_attrs_create(struct device *const dev, + struct counter_attribute_group *const group, + const struct counter_comp *const comp, + const enum counter_scope scope, + void *const parent, const size_t id) +{ + const struct counter_array *const array = comp->priv; + struct counter_comp ext = *comp; + struct counter_array *element; + size_t idx; + int err; + + /* Create an attribute for each array element */ + for (idx = 0; idx < array->length; idx++) { + /* Generate array element attribute name */ + ext.name = devm_kasprintf(dev, GFP_KERNEL, "%s%zu", comp->name, + idx); + if (!ext.name) + return -ENOMEM; + + /* Allocate and configure array element */ + element = devm_kzalloc(dev, sizeof(*element), GFP_KERNEL); + if (!element) + return -ENOMEM; + element->type = array->type; + element->avail = array->avail; + element->idx = idx; + ext.priv = element; + + /* Create all attributes associated with the array element */ + err = counter_ext_attrs_create(dev, group, &ext, scope, parent, + id + idx); + if (err < 0) + return err; + } + + return 0; +} + +static int counter_sysfs_exts_add(struct device *const dev, + struct counter_attribute_group *const group, + const struct counter_comp *const exts, + const size_t num_ext, + const enum counter_scope scope, + void *const parent) +{ + size_t i; + const struct counter_comp *ext; + int err; + size_t id = 0; + const struct counter_array *array; + + /* Create attributes for each extension */ + for (i = 0; i < num_ext; i++) { + ext = &exts[i]; + if (ext->type == COUNTER_COMP_ARRAY) { + err = counter_array_attrs_create(dev, group, ext, scope, + parent, id); + array = ext->priv; + id += array->length; + } else { + err = counter_ext_attrs_create(dev, group, ext, scope, + parent, id); + id++; + } + if (err < 0) + return err; + } + + return 0; +} + static struct counter_comp counter_signal_comp = { .type = COUNTER_COMP_SIGNAL_LEVEL, .name = "signal", @@ -593,8 +839,6 @@ static int counter_signal_attrs_create(struct counter_device *const counter, struct device *const dev = &counter->dev; int err; struct counter_comp comp; - size_t i; - struct counter_comp *ext; /* Create main Signal attribute */ comp = counter_signal_comp; @@ -608,21 +852,9 @@ static int counter_signal_attrs_create(struct counter_device *const counter, if (err < 0) return err; - /* Create an attribute for each extension */ - for (i = 0; i < signal->num_ext; i++) { - ext = &signal->ext[i]; - - err = counter_attr_create(dev, cattr_group, ext, scope, signal); - if (err < 0) - return err; - - err = counter_comp_id_attr_create(dev, cattr_group, ext->name, - i); - if (err < 0) - return err; - } - - return 0; + /* Add Signal extensions */ + return counter_sysfs_exts_add(dev, cattr_group, signal->ext, + signal->num_ext, scope, signal); } static int counter_sysfs_signals_add(struct counter_device *const counter, @@ -707,8 +939,6 @@ static int counter_count_attrs_create(struct counter_device *const counter, struct device *const dev = &counter->dev; int err; struct counter_comp comp; - size_t i; - struct counter_comp *ext; /* Create main Count attribute */ comp = counter_count_comp; @@ -731,21 +961,9 @@ static int counter_count_attrs_create(struct counter_device *const counter, if (err < 0) return err; - /* Create an attribute for each extension */ - for (i = 0; i < count->num_ext; i++) { - ext = &count->ext[i]; - - err = counter_attr_create(dev, cattr_group, ext, scope, count); - if (err < 0) - return err; - - err = counter_comp_id_attr_create(dev, cattr_group, ext->name, - i); - if (err < 0) - return err; - } - - return 0; + /* Add Count extensions */ + return counter_sysfs_exts_add(dev, cattr_group, count->ext, + count->num_ext, scope, count); } static int counter_sysfs_counts_add(struct counter_device *const counter, @@ -838,8 +1056,6 @@ static int counter_sysfs_attr_add(struct counter_device *const counter, const enum counter_scope scope = COUNTER_SCOPE_DEVICE; struct device *const dev = &counter->dev; int err; - size_t i; - struct counter_comp *ext; /* Add Signals sysfs attributes */ err = counter_sysfs_signals_add(counter, cattr_group); @@ -876,19 +1092,9 @@ static int counter_sysfs_attr_add(struct counter_device *const counter, if (err < 0) return err; - /* Create an attribute for each extension */ - for (i = 0; i < counter->num_ext; i++) { - ext = &counter->ext[i]; - - err = counter_attr_create(dev, cattr_group, ext, scope, NULL); - if (err < 0) - return err; - - err = counter_comp_id_attr_create(dev, cattr_group, ext->name, - i); - if (err < 0) - return err; - } + /* Add device extensions */ + return counter_sysfs_exts_add(dev, cattr_group, counter->ext, + counter->num_ext, scope, NULL); return 0; } diff --git a/drivers/counter/ftm-quaddec.c b/drivers/counter/ftm-quaddec.c index 2a58582a9df4..aea6622a9b13 100644 --- a/drivers/counter/ftm-quaddec.c +++ b/drivers/counter/ftm-quaddec.c @@ -325,3 +325,4 @@ module_platform_driver(ftm_quaddec_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Kjeld Flarup <kfa@deif.com>"); MODULE_AUTHOR("Patrick Havelange <patrick.havelange@essensium.com>"); +MODULE_IMPORT_NS(COUNTER); diff --git a/drivers/counter/intel-qep.c b/drivers/counter/intel-qep.c index 47a6a9dfc9e8..af5942e66f7d 100644 --- a/drivers/counter/intel-qep.c +++ b/drivers/counter/intel-qep.c @@ -523,3 +523,4 @@ MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@linux.intel.com>"); MODULE_AUTHOR("Raymond Tan <raymond.tan@intel.com>"); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Intel Quadrature Encoder Peripheral driver"); +MODULE_IMPORT_NS(COUNTER); diff --git a/drivers/counter/interrupt-cnt.c b/drivers/counter/interrupt-cnt.c index 3b13f56bbb11..229473855c5b 100644 --- a/drivers/counter/interrupt-cnt.c +++ b/drivers/counter/interrupt-cnt.c @@ -139,12 +139,23 @@ static int interrupt_cnt_signal_read(struct counter_device *counter, return 0; } +static int interrupt_cnt_watch_validate(struct counter_device *counter, + const struct counter_watch *watch) +{ + if (watch->channel != 0 || + watch->event != COUNTER_EVENT_CHANGE_OF_STATE) + return -EINVAL; + + return 0; +} + static const struct counter_ops interrupt_cnt_ops = { .action_read = interrupt_cnt_action_read, .count_read = interrupt_cnt_read, .count_write = interrupt_cnt_write, .function_read = interrupt_cnt_function_read, .signal_read = interrupt_cnt_signal_read, + .watch_validate = interrupt_cnt_watch_validate, }; static int interrupt_cnt_probe(struct platform_device *pdev) @@ -242,3 +253,4 @@ MODULE_ALIAS("platform:interrupt-counter"); MODULE_AUTHOR("Oleksij Rempel <o.rempel@pengutronix.de>"); MODULE_DESCRIPTION("Interrupt counter driver"); MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(COUNTER); diff --git a/drivers/counter/microchip-tcb-capture.c b/drivers/counter/microchip-tcb-capture.c index 00844445143b..f9dee15d9777 100644 --- a/drivers/counter/microchip-tcb-capture.c +++ b/drivers/counter/microchip-tcb-capture.c @@ -394,3 +394,4 @@ module_platform_driver(mchp_tc_driver); MODULE_AUTHOR("Kamel Bouhara <kamel.bouhara@bootlin.com>"); MODULE_DESCRIPTION("Microchip TCB Capture driver"); MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(COUNTER); diff --git a/drivers/counter/stm32-lptimer-cnt.c b/drivers/counter/stm32-lptimer-cnt.c index 68031d93ce89..d6b80b6dfc28 100644 --- a/drivers/counter/stm32-lptimer-cnt.c +++ b/drivers/counter/stm32-lptimer-cnt.c @@ -520,3 +520,4 @@ MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier@st.com>"); MODULE_ALIAS("platform:stm32-lptimer-counter"); MODULE_DESCRIPTION("STMicroelectronics STM32 LPTIM counter driver"); MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(COUNTER); diff --git a/drivers/counter/stm32-timer-cnt.c b/drivers/counter/stm32-timer-cnt.c index 5779ae7c73cf..9bf20a5d6bda 100644 --- a/drivers/counter/stm32-timer-cnt.c +++ b/drivers/counter/stm32-timer-cnt.c @@ -417,3 +417,4 @@ MODULE_AUTHOR("Benjamin Gaignard <benjamin.gaignard@st.com>"); MODULE_ALIAS("platform:stm32-timer-counter"); MODULE_DESCRIPTION("STMicroelectronics STM32 TIMER counter driver"); MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(COUNTER); diff --git a/drivers/counter/ti-ecap-capture.c b/drivers/counter/ti-ecap-capture.c new file mode 100644 index 000000000000..af10de30aba5 --- /dev/null +++ b/drivers/counter/ti-ecap-capture.c @@ -0,0 +1,614 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * ECAP Capture driver + * + * Copyright (C) 2022 Julien Panis <jpanis@baylibre.com> + */ + +#include <linux/atomic.h> +#include <linux/clk.h> +#include <linux/counter.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/mutex.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> + +#define ECAP_DRV_NAME "ecap" + +/* ECAP event IDs */ +#define ECAP_CEVT1 0 +#define ECAP_CEVT2 1 +#define ECAP_CEVT3 2 +#define ECAP_CEVT4 3 +#define ECAP_CNTOVF 4 + +#define ECAP_CEVT_LAST ECAP_CEVT4 +#define ECAP_NB_CEVT (ECAP_CEVT_LAST + 1) + +#define ECAP_EVT_LAST ECAP_CNTOVF +#define ECAP_NB_EVT (ECAP_EVT_LAST + 1) + +/* Registers */ +#define ECAP_TSCNT_REG 0x00 + +#define ECAP_CAP_REG(i) (((i) << 2) + 0x08) + +#define ECAP_ECCTL_REG 0x28 +#define ECAP_CAPPOL_BIT(i) BIT((i) << 1) +#define ECAP_EV_MODE_MASK GENMASK(7, 0) +#define ECAP_CAPLDEN_BIT BIT(8) +#define ECAP_CONT_ONESHT_BIT BIT(16) +#define ECAP_STOPVALUE_MASK GENMASK(18, 17) +#define ECAP_TSCNTSTP_BIT BIT(20) +#define ECAP_SYNCO_DIS_MASK GENMASK(23, 22) +#define ECAP_CAP_APWM_BIT BIT(25) +#define ECAP_ECCTL_EN_MASK (ECAP_CAPLDEN_BIT | ECAP_TSCNTSTP_BIT) +#define ECAP_ECCTL_CFG_MASK (ECAP_SYNCO_DIS_MASK | ECAP_STOPVALUE_MASK \ + | ECAP_ECCTL_EN_MASK | ECAP_CAP_APWM_BIT \ + | ECAP_CONT_ONESHT_BIT) + +#define ECAP_ECINT_EN_FLG_REG 0x2c +#define ECAP_EVT_EN_MASK GENMASK(ECAP_NB_EVT, ECAP_NB_CEVT) +#define ECAP_EVT_FLG_BIT(i) BIT((i) + 17) + +#define ECAP_ECINT_CLR_FRC_REG 0x30 +#define ECAP_INT_CLR_BIT BIT(0) +#define ECAP_EVT_CLR_BIT(i) BIT((i) + 1) +#define ECAP_EVT_CLR_MASK GENMASK(ECAP_NB_EVT, 0) + +#define ECAP_PID_REG 0x5c + +/* ECAP signals */ +#define ECAP_CLOCK_SIG 0 +#define ECAP_INPUT_SIG 1 + +static const struct regmap_config ecap_cnt_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = ECAP_PID_REG, +}; + +/** + * struct ecap_cnt_dev - device private data structure + * @enabled: device state + * @lock: synchronization lock to prevent I/O race conditions + * @clk: device clock + * @regmap: device register map + * @nb_ovf: number of overflows since capture start + * @pm_ctx: device context for PM operations + * @pm_ctx.ev_mode: event mode bits + * @pm_ctx.time_cntr: timestamp counter value + */ +struct ecap_cnt_dev { + bool enabled; + struct mutex lock; + struct clk *clk; + struct regmap *regmap; + atomic_t nb_ovf; + struct { + u8 ev_mode; + u32 time_cntr; + } pm_ctx; +}; + +static u8 ecap_cnt_capture_get_evmode(struct counter_device *counter) +{ + struct ecap_cnt_dev *ecap_dev = counter_priv(counter); + unsigned int regval; + + pm_runtime_get_sync(counter->parent); + regmap_read(ecap_dev->regmap, ECAP_ECCTL_REG, ®val); + pm_runtime_put_sync(counter->parent); + + return regval; +} + +static void ecap_cnt_capture_set_evmode(struct counter_device *counter, u8 ev_mode) +{ + struct ecap_cnt_dev *ecap_dev = counter_priv(counter); + + pm_runtime_get_sync(counter->parent); + regmap_update_bits(ecap_dev->regmap, ECAP_ECCTL_REG, ECAP_EV_MODE_MASK, ev_mode); + pm_runtime_put_sync(counter->parent); +} + +static void ecap_cnt_capture_enable(struct counter_device *counter) +{ + struct ecap_cnt_dev *ecap_dev = counter_priv(counter); + + pm_runtime_get_sync(counter->parent); + + /* Enable interrupts on events */ + regmap_update_bits(ecap_dev->regmap, ECAP_ECINT_EN_FLG_REG, + ECAP_EVT_EN_MASK, ECAP_EVT_EN_MASK); + + /* Run counter */ + regmap_update_bits(ecap_dev->regmap, ECAP_ECCTL_REG, ECAP_ECCTL_CFG_MASK, + ECAP_SYNCO_DIS_MASK | ECAP_STOPVALUE_MASK | ECAP_ECCTL_EN_MASK); +} + +static void ecap_cnt_capture_disable(struct counter_device *counter) +{ + struct ecap_cnt_dev *ecap_dev = counter_priv(counter); + + /* Stop counter */ + regmap_update_bits(ecap_dev->regmap, ECAP_ECCTL_REG, ECAP_ECCTL_EN_MASK, 0); + + /* Disable interrupts on events */ + regmap_update_bits(ecap_dev->regmap, ECAP_ECINT_EN_FLG_REG, ECAP_EVT_EN_MASK, 0); + + pm_runtime_put_sync(counter->parent); +} + +static u32 ecap_cnt_count_get_val(struct counter_device *counter, unsigned int reg) +{ + struct ecap_cnt_dev *ecap_dev = counter_priv(counter); + unsigned int regval; + + pm_runtime_get_sync(counter->parent); + regmap_read(ecap_dev->regmap, reg, ®val); + pm_runtime_put_sync(counter->parent); + + return regval; +} + +static void ecap_cnt_count_set_val(struct counter_device *counter, unsigned int reg, u32 val) +{ + struct ecap_cnt_dev *ecap_dev = counter_priv(counter); + + pm_runtime_get_sync(counter->parent); + regmap_write(ecap_dev->regmap, reg, val); + pm_runtime_put_sync(counter->parent); +} + +static int ecap_cnt_count_read(struct counter_device *counter, + struct counter_count *count, u64 *val) +{ + *val = ecap_cnt_count_get_val(counter, ECAP_TSCNT_REG); + + return 0; +} + +static int ecap_cnt_count_write(struct counter_device *counter, + struct counter_count *count, u64 val) +{ + if (val > U32_MAX) + return -ERANGE; + + ecap_cnt_count_set_val(counter, ECAP_TSCNT_REG, val); + + return 0; +} + +static int ecap_cnt_function_read(struct counter_device *counter, + struct counter_count *count, + enum counter_function *function) +{ + *function = COUNTER_FUNCTION_INCREASE; + + return 0; +} + +static int ecap_cnt_action_read(struct counter_device *counter, + struct counter_count *count, + struct counter_synapse *synapse, + enum counter_synapse_action *action) +{ + *action = (synapse->signal->id == ECAP_CLOCK_SIG) ? + COUNTER_SYNAPSE_ACTION_RISING_EDGE : + COUNTER_SYNAPSE_ACTION_NONE; + + return 0; +} + +static int ecap_cnt_watch_validate(struct counter_device *counter, + const struct counter_watch *watch) +{ + if (watch->channel > ECAP_CEVT_LAST) + return -EINVAL; + + switch (watch->event) { + case COUNTER_EVENT_CAPTURE: + case COUNTER_EVENT_OVERFLOW: + return 0; + default: + return -EINVAL; + } +} + +static int ecap_cnt_clk_get_freq(struct counter_device *counter, + struct counter_signal *signal, u64 *freq) +{ + struct ecap_cnt_dev *ecap_dev = counter_priv(counter); + + *freq = clk_get_rate(ecap_dev->clk); + + return 0; +} + +static int ecap_cnt_pol_read(struct counter_device *counter, + struct counter_signal *signal, + size_t idx, enum counter_signal_polarity *pol) +{ + struct ecap_cnt_dev *ecap_dev = counter_priv(counter); + int bitval; + + pm_runtime_get_sync(counter->parent); + bitval = regmap_test_bits(ecap_dev->regmap, ECAP_ECCTL_REG, ECAP_CAPPOL_BIT(idx)); + pm_runtime_put_sync(counter->parent); + + *pol = bitval ? COUNTER_SIGNAL_POLARITY_NEGATIVE : COUNTER_SIGNAL_POLARITY_POSITIVE; + + return 0; +} + +static int ecap_cnt_pol_write(struct counter_device *counter, + struct counter_signal *signal, + size_t idx, enum counter_signal_polarity pol) +{ + struct ecap_cnt_dev *ecap_dev = counter_priv(counter); + + pm_runtime_get_sync(counter->parent); + if (pol == COUNTER_SIGNAL_POLARITY_NEGATIVE) + regmap_set_bits(ecap_dev->regmap, ECAP_ECCTL_REG, ECAP_CAPPOL_BIT(idx)); + else + regmap_clear_bits(ecap_dev->regmap, ECAP_ECCTL_REG, ECAP_CAPPOL_BIT(idx)); + pm_runtime_put_sync(counter->parent); + + return 0; +} + +static int ecap_cnt_cap_read(struct counter_device *counter, + struct counter_count *count, + size_t idx, u64 *cap) +{ + *cap = ecap_cnt_count_get_val(counter, ECAP_CAP_REG(idx)); + + return 0; +} + +static int ecap_cnt_cap_write(struct counter_device *counter, + struct counter_count *count, + size_t idx, u64 cap) +{ + if (cap > U32_MAX) + return -ERANGE; + + ecap_cnt_count_set_val(counter, ECAP_CAP_REG(idx), cap); + + return 0; +} + +static int ecap_cnt_nb_ovf_read(struct counter_device *counter, + struct counter_count *count, u64 *val) +{ + struct ecap_cnt_dev *ecap_dev = counter_priv(counter); + + *val = atomic_read(&ecap_dev->nb_ovf); + + return 0; +} + +static int ecap_cnt_nb_ovf_write(struct counter_device *counter, + struct counter_count *count, u64 val) +{ + struct ecap_cnt_dev *ecap_dev = counter_priv(counter); + + if (val > U32_MAX) + return -ERANGE; + + atomic_set(&ecap_dev->nb_ovf, val); + + return 0; +} + +static int ecap_cnt_ceiling_read(struct counter_device *counter, + struct counter_count *count, u64 *val) +{ + *val = U32_MAX; + + return 0; +} + +static int ecap_cnt_enable_read(struct counter_device *counter, + struct counter_count *count, u8 *enable) +{ + struct ecap_cnt_dev *ecap_dev = counter_priv(counter); + + *enable = ecap_dev->enabled; + + return 0; +} + +static int ecap_cnt_enable_write(struct counter_device *counter, + struct counter_count *count, u8 enable) +{ + struct ecap_cnt_dev *ecap_dev = counter_priv(counter); + + mutex_lock(&ecap_dev->lock); + + if (enable == ecap_dev->enabled) + goto out; + + if (enable) + ecap_cnt_capture_enable(counter); + else + ecap_cnt_capture_disable(counter); + ecap_dev->enabled = enable; + +out: + mutex_unlock(&ecap_dev->lock); + + return 0; +} + +static const struct counter_ops ecap_cnt_ops = { + .count_read = ecap_cnt_count_read, + .count_write = ecap_cnt_count_write, + .function_read = ecap_cnt_function_read, + .action_read = ecap_cnt_action_read, + .watch_validate = ecap_cnt_watch_validate, +}; + +static const enum counter_function ecap_cnt_functions[] = { + COUNTER_FUNCTION_INCREASE, +}; + +static const enum counter_synapse_action ecap_cnt_clock_actions[] = { + COUNTER_SYNAPSE_ACTION_RISING_EDGE, +}; + +static const enum counter_synapse_action ecap_cnt_input_actions[] = { + COUNTER_SYNAPSE_ACTION_NONE, +}; + +static struct counter_comp ecap_cnt_clock_ext[] = { + COUNTER_COMP_SIGNAL_U64("frequency", ecap_cnt_clk_get_freq, NULL), +}; + +static const enum counter_signal_polarity ecap_cnt_pol_avail[] = { + COUNTER_SIGNAL_POLARITY_POSITIVE, + COUNTER_SIGNAL_POLARITY_NEGATIVE, +}; + +static DEFINE_COUNTER_ARRAY_POLARITY(ecap_cnt_pol_array, ecap_cnt_pol_avail, ECAP_NB_CEVT); + +static struct counter_comp ecap_cnt_signal_ext[] = { + COUNTER_COMP_ARRAY_POLARITY(ecap_cnt_pol_read, ecap_cnt_pol_write, ecap_cnt_pol_array), +}; + +static struct counter_signal ecap_cnt_signals[] = { + { + .id = ECAP_CLOCK_SIG, + .name = "Clock Signal", + .ext = ecap_cnt_clock_ext, + .num_ext = ARRAY_SIZE(ecap_cnt_clock_ext), + }, + { + .id = ECAP_INPUT_SIG, + .name = "Input Signal", + .ext = ecap_cnt_signal_ext, + .num_ext = ARRAY_SIZE(ecap_cnt_signal_ext), + }, +}; + +static struct counter_synapse ecap_cnt_synapses[] = { + { + .actions_list = ecap_cnt_clock_actions, + .num_actions = ARRAY_SIZE(ecap_cnt_clock_actions), + .signal = &ecap_cnt_signals[ECAP_CLOCK_SIG], + }, + { + .actions_list = ecap_cnt_input_actions, + .num_actions = ARRAY_SIZE(ecap_cnt_input_actions), + .signal = &ecap_cnt_signals[ECAP_INPUT_SIG], + }, +}; + +static DEFINE_COUNTER_ARRAY_CAPTURE(ecap_cnt_cap_array, ECAP_NB_CEVT); + +static struct counter_comp ecap_cnt_count_ext[] = { + COUNTER_COMP_ARRAY_CAPTURE(ecap_cnt_cap_read, ecap_cnt_cap_write, ecap_cnt_cap_array), + COUNTER_COMP_COUNT_U64("num_overflows", ecap_cnt_nb_ovf_read, ecap_cnt_nb_ovf_write), + COUNTER_COMP_CEILING(ecap_cnt_ceiling_read, NULL), + COUNTER_COMP_ENABLE(ecap_cnt_enable_read, ecap_cnt_enable_write), +}; + +static struct counter_count ecap_cnt_counts[] = { + { + .name = "Timestamp Counter", + .functions_list = ecap_cnt_functions, + .num_functions = ARRAY_SIZE(ecap_cnt_functions), + .synapses = ecap_cnt_synapses, + .num_synapses = ARRAY_SIZE(ecap_cnt_synapses), + .ext = ecap_cnt_count_ext, + .num_ext = ARRAY_SIZE(ecap_cnt_count_ext), + }, +}; + +static irqreturn_t ecap_cnt_isr(int irq, void *dev_id) +{ + struct counter_device *counter_dev = dev_id; + struct ecap_cnt_dev *ecap_dev = counter_priv(counter_dev); + unsigned int clr = 0; + unsigned int flg; + int i; + + regmap_read(ecap_dev->regmap, ECAP_ECINT_EN_FLG_REG, &flg); + + /* Check capture events */ + for (i = 0 ; i < ECAP_NB_CEVT ; i++) { + if (flg & ECAP_EVT_FLG_BIT(i)) { + counter_push_event(counter_dev, COUNTER_EVENT_CAPTURE, i); + clr |= ECAP_EVT_CLR_BIT(i); + } + } + + /* Check counter overflow */ + if (flg & ECAP_EVT_FLG_BIT(ECAP_CNTOVF)) { + atomic_inc(&ecap_dev->nb_ovf); + for (i = 0 ; i < ECAP_NB_CEVT ; i++) + counter_push_event(counter_dev, COUNTER_EVENT_OVERFLOW, i); + clr |= ECAP_EVT_CLR_BIT(ECAP_CNTOVF); + } + + clr |= ECAP_INT_CLR_BIT; + regmap_update_bits(ecap_dev->regmap, ECAP_ECINT_CLR_FRC_REG, ECAP_EVT_CLR_MASK, clr); + + return IRQ_HANDLED; +} + +static void ecap_cnt_pm_disable(void *dev) +{ + pm_runtime_disable(dev); +} + +static int ecap_cnt_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct ecap_cnt_dev *ecap_dev; + struct counter_device *counter_dev; + void __iomem *mmio_base; + unsigned long clk_rate; + int ret; + + counter_dev = devm_counter_alloc(dev, sizeof(*ecap_dev)); + if (IS_ERR(counter_dev)) + return PTR_ERR(counter_dev); + + counter_dev->name = ECAP_DRV_NAME; + counter_dev->parent = dev; + counter_dev->ops = &ecap_cnt_ops; + counter_dev->signals = ecap_cnt_signals; + counter_dev->num_signals = ARRAY_SIZE(ecap_cnt_signals); + counter_dev->counts = ecap_cnt_counts; + counter_dev->num_counts = ARRAY_SIZE(ecap_cnt_counts); + + ecap_dev = counter_priv(counter_dev); + + mutex_init(&ecap_dev->lock); + + ecap_dev->clk = devm_clk_get_enabled(dev, "fck"); + if (IS_ERR(ecap_dev->clk)) + return dev_err_probe(dev, PTR_ERR(ecap_dev->clk), "failed to get clock\n"); + + clk_rate = clk_get_rate(ecap_dev->clk); + if (!clk_rate) { + dev_err(dev, "failed to get clock rate\n"); + return -EINVAL; + } + + mmio_base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(mmio_base)) + return PTR_ERR(mmio_base); + + ecap_dev->regmap = devm_regmap_init_mmio(dev, mmio_base, &ecap_cnt_regmap_config); + if (IS_ERR(ecap_dev->regmap)) + return dev_err_probe(dev, PTR_ERR(ecap_dev->regmap), "failed to init regmap\n"); + + ret = platform_get_irq(pdev, 0); + if (ret < 0) + return dev_err_probe(dev, ret, "failed to get irq\n"); + + ret = devm_request_irq(dev, ret, ecap_cnt_isr, 0, pdev->name, counter_dev); + if (ret) + return dev_err_probe(dev, ret, "failed to request irq\n"); + + platform_set_drvdata(pdev, counter_dev); + + pm_runtime_enable(dev); + + /* Register a cleanup callback to care for disabling PM */ + ret = devm_add_action_or_reset(dev, ecap_cnt_pm_disable, dev); + if (ret) + return dev_err_probe(dev, ret, "failed to add pm disable action\n"); + + ret = devm_counter_add(dev, counter_dev); + if (ret) + return dev_err_probe(dev, ret, "failed to add counter\n"); + + return 0; +} + +static int ecap_cnt_remove(struct platform_device *pdev) +{ + struct counter_device *counter_dev = platform_get_drvdata(pdev); + struct ecap_cnt_dev *ecap_dev = counter_priv(counter_dev); + + if (ecap_dev->enabled) + ecap_cnt_capture_disable(counter_dev); + + return 0; +} + +static int ecap_cnt_suspend(struct device *dev) +{ + struct counter_device *counter_dev = dev_get_drvdata(dev); + struct ecap_cnt_dev *ecap_dev = counter_priv(counter_dev); + + /* If eCAP is running, stop capture then save timestamp counter */ + if (ecap_dev->enabled) { + /* + * Disabling capture has the following effects: + * - interrupts are disabled + * - loading of capture registers is disabled + * - timebase counter is stopped + */ + ecap_cnt_capture_disable(counter_dev); + ecap_dev->pm_ctx.time_cntr = ecap_cnt_count_get_val(counter_dev, ECAP_TSCNT_REG); + } + + ecap_dev->pm_ctx.ev_mode = ecap_cnt_capture_get_evmode(counter_dev); + + clk_disable(ecap_dev->clk); + + return 0; +} + +static int ecap_cnt_resume(struct device *dev) +{ + struct counter_device *counter_dev = dev_get_drvdata(dev); + struct ecap_cnt_dev *ecap_dev = counter_priv(counter_dev); + + clk_enable(ecap_dev->clk); + + ecap_cnt_capture_set_evmode(counter_dev, ecap_dev->pm_ctx.ev_mode); + + /* If eCAP was running, restore timestamp counter then run capture */ + if (ecap_dev->enabled) { + ecap_cnt_count_set_val(counter_dev, ECAP_TSCNT_REG, ecap_dev->pm_ctx.time_cntr); + ecap_cnt_capture_enable(counter_dev); + } + + return 0; +} + +static DEFINE_SIMPLE_DEV_PM_OPS(ecap_cnt_pm_ops, ecap_cnt_suspend, ecap_cnt_resume); + +static const struct of_device_id ecap_cnt_of_match[] = { + { .compatible = "ti,am62-ecap-capture" }, + {}, +}; +MODULE_DEVICE_TABLE(of, ecap_cnt_of_match); + +static struct platform_driver ecap_cnt_driver = { + .probe = ecap_cnt_probe, + .remove = ecap_cnt_remove, + .driver = { + .name = "ecap-capture", + .of_match_table = ecap_cnt_of_match, + .pm = pm_sleep_ptr(&ecap_cnt_pm_ops), + }, +}; +module_platform_driver(ecap_cnt_driver); + +MODULE_DESCRIPTION("ECAP Capture driver"); +MODULE_AUTHOR("Julien Panis <jpanis@baylibre.com>"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(COUNTER); diff --git a/drivers/counter/ti-eqep.c b/drivers/counter/ti-eqep.c index 0489d26eb47c..b0f24cf3e891 100644 --- a/drivers/counter/ti-eqep.c +++ b/drivers/counter/ti-eqep.c @@ -456,3 +456,4 @@ module_platform_driver(ti_eqep_driver); MODULE_AUTHOR("David Lechner <david@lechnology.com>"); MODULE_DESCRIPTION("TI eQEP counter driver"); MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(COUNTER); diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 954749afb5fe..82e5de1f6f8c 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -153,7 +153,7 @@ config ARM_OMAP2PLUS_CPUFREQ config ARM_QCOM_CPUFREQ_NVMEM tristate "Qualcomm nvmem based CPUFreq" depends on ARCH_QCOM - depends on QCOM_QFPROM + depends on NVMEM_QCOM_QFPROM depends on QCOM_SMEM select PM_OPP help diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig index dca7cecb37e3..290186e44e6b 100644 --- a/drivers/extcon/Kconfig +++ b/drivers/extcon/Kconfig @@ -183,7 +183,7 @@ config EXTCON_USBC_CROS_EC config EXTCON_USBC_TUSB320 tristate "TI TUSB320 USB-C extcon support" - depends on I2C + depends on I2C && TYPEC select REGMAP_I2C help Say Y here to enable support for USB Type C cable detection extcon diff --git a/drivers/extcon/extcon-usbc-tusb320.c b/drivers/extcon/extcon-usbc-tusb320.c index 6ba3d89b106d..41041ff0fadb 100644 --- a/drivers/extcon/extcon-usbc-tusb320.c +++ b/drivers/extcon/extcon-usbc-tusb320.c @@ -1,11 +1,12 @@ // SPDX-License-Identifier: GPL-2.0 -/** +/* * drivers/extcon/extcon-tusb320.c - TUSB320 extcon driver * * Copyright (C) 2020 National Instruments Corporation * Author: Michael Auchter <michael.auchter@ni.com> */ +#include <linux/bitfield.h> #include <linux/extcon-provider.h> #include <linux/i2c.h> #include <linux/init.h> @@ -13,6 +14,24 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/regmap.h> +#include <linux/usb/typec.h> + +#define TUSB320_REG8 0x8 +#define TUSB320_REG8_CURRENT_MODE_ADVERTISE GENMASK(7, 6) +#define TUSB320_REG8_CURRENT_MODE_ADVERTISE_USB 0x0 +#define TUSB320_REG8_CURRENT_MODE_ADVERTISE_15A 0x1 +#define TUSB320_REG8_CURRENT_MODE_ADVERTISE_30A 0x2 +#define TUSB320_REG8_CURRENT_MODE_DETECT GENMASK(5, 4) +#define TUSB320_REG8_CURRENT_MODE_DETECT_DEF 0x0 +#define TUSB320_REG8_CURRENT_MODE_DETECT_MED 0x1 +#define TUSB320_REG8_CURRENT_MODE_DETECT_ACC 0x2 +#define TUSB320_REG8_CURRENT_MODE_DETECT_HI 0x3 +#define TUSB320_REG8_ACCESSORY_CONNECTED GENMASK(3, 2) +#define TUSB320_REG8_ACCESSORY_CONNECTED_NONE 0x0 +#define TUSB320_REG8_ACCESSORY_CONNECTED_AUDIO 0x4 +#define TUSB320_REG8_ACCESSORY_CONNECTED_ACC 0x5 +#define TUSB320_REG8_ACCESSORY_CONNECTED_DEBUG 0x6 +#define TUSB320_REG8_ACTIVE_CABLE_DETECTION BIT(0) #define TUSB320_REG9 0x9 #define TUSB320_REG9_ATTACHED_STATE_SHIFT 6 @@ -55,6 +74,10 @@ struct tusb320_priv { struct extcon_dev *edev; struct tusb320_ops *ops; enum tusb320_attached_state state; + struct typec_port *port; + struct typec_capability cap; + enum typec_port_type port_type; + enum typec_pwr_opmode pwr_opmode; }; static const char * const tusb_attached_states[] = { @@ -184,19 +207,47 @@ static struct tusb320_ops tusb320l_ops = { .get_revision = tusb320l_get_revision, }; -static irqreturn_t tusb320_irq_handler(int irq, void *dev_id) +static int tusb320_set_adv_pwr_mode(struct tusb320_priv *priv) { - struct tusb320_priv *priv = dev_id; - int state, polarity; - unsigned reg; + u8 mode; + + if (priv->pwr_opmode == TYPEC_PWR_MODE_USB) + mode = TUSB320_REG8_CURRENT_MODE_ADVERTISE_USB; + else if (priv->pwr_opmode == TYPEC_PWR_MODE_1_5A) + mode = TUSB320_REG8_CURRENT_MODE_ADVERTISE_15A; + else if (priv->pwr_opmode == TYPEC_PWR_MODE_3_0A) + mode = TUSB320_REG8_CURRENT_MODE_ADVERTISE_30A; + else /* No other mode is supported. */ + return -EINVAL; - if (regmap_read(priv->regmap, TUSB320_REG9, ®)) { - dev_err(priv->dev, "error during i2c read!\n"); - return IRQ_NONE; - } + return regmap_write_bits(priv->regmap, TUSB320_REG8, + TUSB320_REG8_CURRENT_MODE_ADVERTISE, + FIELD_PREP(TUSB320_REG8_CURRENT_MODE_ADVERTISE, + mode)); +} - if (!(reg & TUSB320_REG9_INTERRUPT_STATUS)) - return IRQ_NONE; +static int tusb320_port_type_set(struct typec_port *port, + enum typec_port_type type) +{ + struct tusb320_priv *priv = typec_get_drvdata(port); + + if (type == TYPEC_PORT_SRC) + return priv->ops->set_mode(priv, TUSB320_MODE_DFP); + else if (type == TYPEC_PORT_SNK) + return priv->ops->set_mode(priv, TUSB320_MODE_UFP); + else if (type == TYPEC_PORT_DRP) + return priv->ops->set_mode(priv, TUSB320_MODE_DRP); + else + return priv->ops->set_mode(priv, TUSB320_MODE_PORT); +} + +static const struct typec_operations tusb320_typec_ops = { + .port_type_set = tusb320_port_type_set, +}; + +static void tusb320_extcon_irq_handler(struct tusb320_priv *priv, u8 reg) +{ + int state, polarity; state = (reg >> TUSB320_REG9_ATTACHED_STATE_SHIFT) & TUSB320_REG9_ATTACHED_STATE_MASK; @@ -219,6 +270,64 @@ static irqreturn_t tusb320_irq_handler(int irq, void *dev_id) extcon_sync(priv->edev, EXTCON_USB_HOST); priv->state = state; +} + +static void tusb320_typec_irq_handler(struct tusb320_priv *priv, u8 reg9) +{ + struct typec_port *port = priv->port; + struct device *dev = priv->dev; + u8 mode, role, state; + int ret, reg8; + bool ori; + + ori = reg9 & TUSB320_REG9_CABLE_DIRECTION; + typec_set_orientation(port, ori ? TYPEC_ORIENTATION_REVERSE : + TYPEC_ORIENTATION_NORMAL); + + state = (reg9 >> TUSB320_REG9_ATTACHED_STATE_SHIFT) & + TUSB320_REG9_ATTACHED_STATE_MASK; + if (state == TUSB320_ATTACHED_STATE_DFP) + role = TYPEC_SOURCE; + else + role = TYPEC_SINK; + + typec_set_vconn_role(port, role); + typec_set_pwr_role(port, role); + typec_set_data_role(port, role == TYPEC_SOURCE ? + TYPEC_HOST : TYPEC_DEVICE); + + ret = regmap_read(priv->regmap, TUSB320_REG8, ®8); + if (ret) { + dev_err(dev, "error during reg8 i2c read, ret=%d!\n", ret); + return; + } + + mode = FIELD_GET(TUSB320_REG8_CURRENT_MODE_DETECT, reg8); + if (mode == TUSB320_REG8_CURRENT_MODE_DETECT_DEF) + typec_set_pwr_opmode(port, TYPEC_PWR_MODE_USB); + else if (mode == TUSB320_REG8_CURRENT_MODE_DETECT_MED) + typec_set_pwr_opmode(port, TYPEC_PWR_MODE_1_5A); + else if (mode == TUSB320_REG8_CURRENT_MODE_DETECT_HI) + typec_set_pwr_opmode(port, TYPEC_PWR_MODE_3_0A); + else /* Charge through accessory */ + typec_set_pwr_opmode(port, TYPEC_PWR_MODE_USB); +} + +static irqreturn_t tusb320_irq_handler(int irq, void *dev_id) +{ + struct tusb320_priv *priv = dev_id; + unsigned int reg; + + if (regmap_read(priv->regmap, TUSB320_REG9, ®)) { + dev_err(priv->dev, "error during i2c read!\n"); + return IRQ_NONE; + } + + if (!(reg & TUSB320_REG9_INTERRUPT_STATUS)) + return IRQ_NONE; + + tusb320_extcon_irq_handler(priv, reg); + tusb320_typec_irq_handler(priv, reg); regmap_write(priv->regmap, TUSB320_REG9, reg); @@ -230,8 +339,84 @@ static const struct regmap_config tusb320_regmap_config = { .val_bits = 8, }; -static int tusb320_extcon_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int tusb320_extcon_probe(struct tusb320_priv *priv) +{ + int ret; + + priv->edev = devm_extcon_dev_allocate(priv->dev, tusb320_extcon_cable); + if (IS_ERR(priv->edev)) { + dev_err(priv->dev, "failed to allocate extcon device\n"); + return PTR_ERR(priv->edev); + } + + ret = devm_extcon_dev_register(priv->dev, priv->edev); + if (ret < 0) { + dev_err(priv->dev, "failed to register extcon device\n"); + return ret; + } + + extcon_set_property_capability(priv->edev, EXTCON_USB, + EXTCON_PROP_USB_TYPEC_POLARITY); + extcon_set_property_capability(priv->edev, EXTCON_USB_HOST, + EXTCON_PROP_USB_TYPEC_POLARITY); + + return 0; +} + +static int tusb320_typec_probe(struct i2c_client *client, + struct tusb320_priv *priv) +{ + struct fwnode_handle *connector; + const char *cap_str; + int ret; + + /* The Type-C connector is optional, for backward compatibility. */ + connector = device_get_named_child_node(&client->dev, "connector"); + if (!connector) + return 0; + + /* Type-C connector found. */ + ret = typec_get_fw_cap(&priv->cap, connector); + if (ret) + return ret; + + priv->port_type = priv->cap.type; + + /* This goes into register 0x8 field CURRENT_MODE_ADVERTISE */ + ret = fwnode_property_read_string(connector, "typec-power-opmode", &cap_str); + if (ret) + return ret; + + ret = typec_find_pwr_opmode(cap_str); + if (ret < 0) + return ret; + if (ret == TYPEC_PWR_MODE_PD) + return -EINVAL; + + priv->pwr_opmode = ret; + + /* Initialize the hardware with the devicetree settings. */ + ret = tusb320_set_adv_pwr_mode(priv); + if (ret) + return ret; + + priv->cap.revision = USB_TYPEC_REV_1_1; + priv->cap.accessory[0] = TYPEC_ACCESSORY_AUDIO; + priv->cap.accessory[1] = TYPEC_ACCESSORY_DEBUG; + priv->cap.orientation_aware = true; + priv->cap.driver_data = priv; + priv->cap.ops = &tusb320_typec_ops; + priv->cap.fwnode = connector; + + priv->port = typec_register_port(&client->dev, &priv->cap); + if (IS_ERR(priv->port)) + return PTR_ERR(priv->port); + + return 0; +} + +static int tusb320_probe(struct i2c_client *client, + const struct i2c_device_id *id) { struct tusb320_priv *priv; const void *match_data; @@ -257,12 +442,6 @@ static int tusb320_extcon_probe(struct i2c_client *client, priv->ops = (struct tusb320_ops*)match_data; - priv->edev = devm_extcon_dev_allocate(priv->dev, tusb320_extcon_cable); - if (IS_ERR(priv->edev)) { - dev_err(priv->dev, "failed to allocate extcon device\n"); - return PTR_ERR(priv->edev); - } - if (priv->ops->get_revision) { ret = priv->ops->get_revision(priv, &revision); if (ret) @@ -272,16 +451,13 @@ static int tusb320_extcon_probe(struct i2c_client *client, dev_info(priv->dev, "chip revision %d\n", revision); } - ret = devm_extcon_dev_register(priv->dev, priv->edev); - if (ret < 0) { - dev_err(priv->dev, "failed to register extcon device\n"); + ret = tusb320_extcon_probe(priv); + if (ret) return ret; - } - extcon_set_property_capability(priv->edev, EXTCON_USB, - EXTCON_PROP_USB_TYPEC_POLARITY); - extcon_set_property_capability(priv->edev, EXTCON_USB_HOST, - EXTCON_PROP_USB_TYPEC_POLARITY); + ret = tusb320_typec_probe(client, priv); + if (ret) + return ret; /* update initial state */ tusb320_irq_handler(client->irq, priv); @@ -313,7 +489,7 @@ static const struct of_device_id tusb320_extcon_dt_match[] = { MODULE_DEVICE_TABLE(of, tusb320_extcon_dt_match); static struct i2c_driver tusb320_extcon_driver = { - .probe = tusb320_extcon_probe, + .probe = tusb320_probe, .driver = { .name = "extcon-tusb320", .of_match_table = tusb320_extcon_dt_match, diff --git a/drivers/firmware/google/gsmi.c b/drivers/firmware/google/gsmi.c index adaa492c3d2d..4e2575dfeb90 100644 --- a/drivers/firmware/google/gsmi.c +++ b/drivers/firmware/google/gsmi.c @@ -681,6 +681,15 @@ static struct notifier_block gsmi_die_notifier = { static int gsmi_panic_callback(struct notifier_block *nb, unsigned long reason, void *arg) { + + /* + * Panic callbacks are executed with all other CPUs stopped, + * so we must not attempt to spin waiting for gsmi_dev.lock + * to be released. + */ + if (spin_is_locked(&gsmi_dev.lock)) + return NOTIFY_DONE; + gsmi_shutdown_reason(GSMI_SHUTDOWN_PANIC); return NOTIFY_DONE; } diff --git a/drivers/fpga/dfl-pci.c b/drivers/fpga/dfl-pci.c index fd1fa55c9113..0914e7328b1a 100644 --- a/drivers/fpga/dfl-pci.c +++ b/drivers/fpga/dfl-pci.c @@ -77,12 +77,18 @@ static void cci_pci_free_irq(struct pci_dev *pcidev) #define PCIE_DEVICE_ID_INTEL_PAC_D5005 0x0B2B #define PCIE_DEVICE_ID_SILICOM_PAC_N5010 0x1000 #define PCIE_DEVICE_ID_SILICOM_PAC_N5011 0x1001 +#define PCIE_DEVICE_ID_INTEL_DFL 0xbcce +/* PCI Subdevice ID for PCIE_DEVICE_ID_INTEL_DFL */ +#define PCIE_SUBDEVICE_ID_INTEL_N6000 0x1770 +#define PCIE_SUBDEVICE_ID_INTEL_N6001 0x1771 +#define PCIE_SUBDEVICE_ID_INTEL_C6100 0x17d4 /* VF Device */ #define PCIE_DEVICE_ID_VF_INT_5_X 0xBCBF #define PCIE_DEVICE_ID_VF_INT_6_X 0xBCC1 #define PCIE_DEVICE_ID_VF_DSC_1_X 0x09C5 #define PCIE_DEVICE_ID_INTEL_PAC_D5005_VF 0x0B2C +#define PCIE_DEVICE_ID_INTEL_DFL_VF 0xbccf static struct pci_device_id cci_pcie_id_tbl[] = { {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCIE_DEVICE_ID_PF_INT_5_X),}, @@ -96,6 +102,18 @@ static struct pci_device_id cci_pcie_id_tbl[] = { {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCIE_DEVICE_ID_INTEL_PAC_D5005_VF),}, {PCI_DEVICE(PCI_VENDOR_ID_SILICOM_DENMARK, PCIE_DEVICE_ID_SILICOM_PAC_N5010),}, {PCI_DEVICE(PCI_VENDOR_ID_SILICOM_DENMARK, PCIE_DEVICE_ID_SILICOM_PAC_N5011),}, + {PCI_DEVICE_SUB(PCI_VENDOR_ID_INTEL, PCIE_DEVICE_ID_INTEL_DFL, + PCI_VENDOR_ID_INTEL, PCIE_SUBDEVICE_ID_INTEL_N6000),}, + {PCI_DEVICE_SUB(PCI_VENDOR_ID_INTEL, PCIE_DEVICE_ID_INTEL_DFL_VF, + PCI_VENDOR_ID_INTEL, PCIE_SUBDEVICE_ID_INTEL_N6000),}, + {PCI_DEVICE_SUB(PCI_VENDOR_ID_INTEL, PCIE_DEVICE_ID_INTEL_DFL, + PCI_VENDOR_ID_INTEL, PCIE_SUBDEVICE_ID_INTEL_N6001),}, + {PCI_DEVICE_SUB(PCI_VENDOR_ID_INTEL, PCIE_DEVICE_ID_INTEL_DFL_VF, + PCI_VENDOR_ID_INTEL, PCIE_SUBDEVICE_ID_INTEL_N6001),}, + {PCI_DEVICE_SUB(PCI_VENDOR_ID_INTEL, PCIE_DEVICE_ID_INTEL_DFL, + PCI_VENDOR_ID_INTEL, PCIE_SUBDEVICE_ID_INTEL_C6100),}, + {PCI_DEVICE_SUB(PCI_VENDOR_ID_INTEL, PCIE_DEVICE_ID_INTEL_DFL_VF, + PCI_VENDOR_ID_INTEL, PCIE_SUBDEVICE_ID_INTEL_C6100),}, {0,} }; MODULE_DEVICE_TABLE(pci, cci_pcie_id_tbl); diff --git a/drivers/fpga/dfl.c b/drivers/fpga/dfl.c index 5498bc337f8b..b9aae85ba930 100644 --- a/drivers/fpga/dfl.c +++ b/drivers/fpga/dfl.c @@ -1866,7 +1866,7 @@ long dfl_feature_ioctl_set_irq(struct platform_device *pdev, return -EINVAL; fds = memdup_user((void __user *)(arg + sizeof(hdr)), - hdr.count * sizeof(s32)); + array_size(hdr.count, sizeof(s32))); if (IS_ERR(fds)) return PTR_ERR(fds); diff --git a/drivers/fpga/intel-m10-bmc-sec-update.c b/drivers/fpga/intel-m10-bmc-sec-update.c index 133e511355c9..79d48852825e 100644 --- a/drivers/fpga/intel-m10-bmc-sec-update.c +++ b/drivers/fpga/intel-m10-bmc-sec-update.c @@ -605,6 +605,9 @@ static const struct platform_device_id intel_m10bmc_sec_ids[] = { { .name = "n3000bmc-sec-update", }, + { + .name = "d5005bmc-sec-update", + }, { } }; MODULE_DEVICE_TABLE(platform, intel_m10bmc_sec_ids); diff --git a/drivers/fpga/microchip-spi.c b/drivers/fpga/microchip-spi.c index bd284c7b8dc9..7436976ea904 100644 --- a/drivers/fpga/microchip-spi.c +++ b/drivers/fpga/microchip-spi.c @@ -395,4 +395,5 @@ static struct spi_driver mpf_driver = { module_spi_driver(mpf_driver); MODULE_DESCRIPTION("Microchip Polarfire SPI FPGA Manager"); +MODULE_AUTHOR("Ivan Bornyakov <i.bornyakov@metrotek.ru>"); MODULE_LICENSE("GPL"); diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c index 3a7b78e36701..694e80c06665 100644 --- a/drivers/fsi/fsi-core.c +++ b/drivers/fsi/fsi-core.c @@ -392,8 +392,8 @@ int fsi_slave_write(struct fsi_slave *slave, uint32_t addr, } EXPORT_SYMBOL_GPL(fsi_slave_write); -extern int fsi_slave_claim_range(struct fsi_slave *slave, - uint32_t addr, uint32_t size) +int fsi_slave_claim_range(struct fsi_slave *slave, + uint32_t addr, uint32_t size) { if (addr + size < addr) return -EINVAL; @@ -406,8 +406,8 @@ extern int fsi_slave_claim_range(struct fsi_slave *slave, } EXPORT_SYMBOL_GPL(fsi_slave_claim_range); -extern void fsi_slave_release_range(struct fsi_slave *slave, - uint32_t addr, uint32_t size) +void fsi_slave_release_range(struct fsi_slave *slave, + uint32_t addr, uint32_t size) { } EXPORT_SYMBOL_GPL(fsi_slave_release_range); @@ -1314,6 +1314,9 @@ int fsi_master_register(struct fsi_master *master) mutex_init(&master->scan_lock); master->idx = ida_simple_get(&master_ida, 0, INT_MAX, GFP_KERNEL); + if (master->idx < 0) + return master->idx; + dev_set_name(&master->dev, "fsi%d", master->idx); master->dev.class = &fsi_master_class; diff --git a/drivers/fsi/fsi-master-ast-cf.c b/drivers/fsi/fsi-master-ast-cf.c index 24292acdbaf8..5f608ef8b53c 100644 --- a/drivers/fsi/fsi-master-ast-cf.c +++ b/drivers/fsi/fsi-master-ast-cf.c @@ -1324,12 +1324,14 @@ static int fsi_master_acf_probe(struct platform_device *pdev) } master->cvic = devm_of_iomap(&pdev->dev, np, 0, NULL); if (IS_ERR(master->cvic)) { + of_node_put(np); rc = PTR_ERR(master->cvic); dev_err(&pdev->dev, "Error %d mapping CVIC\n", rc); goto err_free; } rc = of_property_read_u32(np, "copro-sw-interrupts", &master->cvic_sw_irq); + of_node_put(np); if (rc) { dev_err(&pdev->dev, "Can't find coprocessor SW interrupt\n"); goto err_free; diff --git a/drivers/fsi/fsi-master.h b/drivers/fsi/fsi-master.h index cd6bee5e12a7..4762315a46ba 100644 --- a/drivers/fsi/fsi-master.h +++ b/drivers/fsi/fsi-master.h @@ -51,7 +51,7 @@ #define FSI_MMODE_CRS1SHFT 8 /* Clk rate selection 1 shift */ #define FSI_MMODE_CRS1MASK 0x3ff /* Clk rate selection 1 mask */ -/* MRESB: Reset brindge */ +/* MRESB: Reset bridge */ #define FSI_MRESB_RST_GEN 0x80000000 /* General reset */ #define FSI_MRESB_RST_ERR 0x40000000 /* Error Reset */ diff --git a/drivers/fsi/fsi-occ.c b/drivers/fsi/fsi-occ.c index c9cc75fbdfb9..abdd37d5507f 100644 --- a/drivers/fsi/fsi-occ.c +++ b/drivers/fsi/fsi-occ.c @@ -44,6 +44,7 @@ struct occ { struct device *sbefifo; char name[32]; int idx; + bool platform_hwmon; u8 sequence_number; void *buffer; void *client_buffer; @@ -94,6 +95,7 @@ static int occ_open(struct inode *inode, struct file *file) client->occ = occ; mutex_init(&client->lock); file->private_data = client; + get_device(occ->dev); /* We allocate a 1-page buffer, make sure it all fits */ BUILD_BUG_ON((OCC_CMD_DATA_BYTES + 3) > PAGE_SIZE); @@ -197,6 +199,7 @@ static int occ_release(struct inode *inode, struct file *file) { struct occ_client *client = file->private_data; + put_device(client->occ->dev); free_page((unsigned long)client->buffer); kfree(client); @@ -246,7 +249,7 @@ static int occ_verify_checksum(struct occ *occ, struct occ_response *resp, if (checksum != checksum_resp) { dev_err(occ->dev, "Bad checksum: %04x!=%04x\n", checksum, checksum_resp); - return -EBADMSG; + return -EBADE; } return 0; @@ -493,12 +496,19 @@ int fsi_occ_submit(struct device *dev, const void *request, size_t req_len, for (i = 1; i < req_len - 2; ++i) checksum += byte_request[i]; - mutex_lock(&occ->occ_lock); + rc = mutex_lock_interruptible(&occ->occ_lock); + if (rc) + return rc; occ->client_buffer = response; occ->client_buffer_size = user_resp_len; occ->client_response_size = 0; + if (!occ->buffer) { + rc = -ENOENT; + goto done; + } + /* * Get a sequence number and update the counter. Avoid a sequence * number of 0 which would pass the response check below even if the @@ -575,8 +585,11 @@ int fsi_occ_submit(struct device *dev, const void *request, size_t req_len, dev_dbg(dev, "resp_status=%02x resp_data_len=%d\n", resp->return_status, resp_data_length); - occ->client_response_size = resp_data_length + 7; rc = occ_verify_checksum(occ, resp, resp_data_length); + if (rc) + goto done; + + occ->client_response_size = resp_data_length + 7; done: *resp_len = occ->client_response_size; @@ -586,7 +599,7 @@ int fsi_occ_submit(struct device *dev, const void *request, size_t req_len, } EXPORT_SYMBOL_GPL(fsi_occ_submit); -static int occ_unregister_child(struct device *dev, void *data) +static int occ_unregister_platform_child(struct device *dev, void *data) { struct platform_device *hwmon_dev = to_platform_device(dev); @@ -595,12 +608,25 @@ static int occ_unregister_child(struct device *dev, void *data) return 0; } +static int occ_unregister_of_child(struct device *dev, void *data) +{ + struct platform_device *hwmon_dev = to_platform_device(dev); + + of_device_unregister(hwmon_dev); + if (dev->of_node) + of_node_clear_flag(dev->of_node, OF_POPULATED); + + return 0; +} + static int occ_probe(struct platform_device *pdev) { int rc; u32 reg; + char child_name[32]; struct occ *occ; - struct platform_device *hwmon_dev; + struct platform_device *hwmon_dev = NULL; + struct device_node *hwmon_node; struct device *dev = &pdev->dev; struct platform_device_info hwmon_dev_info = { .parent = dev, @@ -659,10 +685,20 @@ static int occ_probe(struct platform_device *pdev) return rc; } - hwmon_dev_info.id = occ->idx; - hwmon_dev = platform_device_register_full(&hwmon_dev_info); - if (IS_ERR(hwmon_dev)) - dev_warn(dev, "failed to create hwmon device\n"); + hwmon_node = of_get_child_by_name(dev->of_node, hwmon_dev_info.name); + if (hwmon_node) { + snprintf(child_name, sizeof(child_name), "%s.%d", hwmon_dev_info.name, occ->idx); + hwmon_dev = of_platform_device_create(hwmon_node, child_name, dev); + of_node_put(hwmon_node); + } + + if (!hwmon_dev) { + occ->platform_hwmon = true; + hwmon_dev_info.id = occ->idx; + hwmon_dev = platform_device_register_full(&hwmon_dev_info); + if (IS_ERR(hwmon_dev)) + dev_warn(dev, "failed to create hwmon device\n"); + } return 0; } @@ -671,11 +707,17 @@ static int occ_remove(struct platform_device *pdev) { struct occ *occ = platform_get_drvdata(pdev); - kvfree(occ->buffer); - misc_deregister(&occ->mdev); - device_for_each_child(&pdev->dev, NULL, occ_unregister_child); + mutex_lock(&occ->occ_lock); + kvfree(occ->buffer); + occ->buffer = NULL; + mutex_unlock(&occ->occ_lock); + + if (occ->platform_hwmon) + device_for_each_child(&pdev->dev, NULL, occ_unregister_platform_child); + else + device_for_each_child(&pdev->dev, NULL, occ_unregister_of_child); ida_simple_remove(&occ_ida, occ->idx); diff --git a/drivers/fsi/fsi-sbefifo.c b/drivers/fsi/fsi-sbefifo.c index f52a912cdf16..5f93a53846aa 100644 --- a/drivers/fsi/fsi-sbefifo.c +++ b/drivers/fsi/fsi-sbefifo.c @@ -477,7 +477,8 @@ static int sbefifo_wait(struct sbefifo *sbefifo, bool up, if (!ready) { sysfs_notify(&sbefifo->dev.kobj, NULL, dev_attr_timeout.attr.name); sbefifo->timed_out = true; - dev_err(dev, "%s FIFO Timeout ! status=%08x\n", up ? "UP" : "DOWN", sts); + dev_err(dev, "%s FIFO Timeout (%u ms)! status=%08x\n", + up ? "UP" : "DOWN", jiffies_to_msecs(timeout), sts); return -ETIMEDOUT; } dev_vdbg(dev, "End of wait status: %08x\n", sts); @@ -497,8 +498,8 @@ static int sbefifo_send_command(struct sbefifo *sbefifo, u32 status; int rc; - dev_vdbg(dev, "sending command (%zd words, cmd=%04x)\n", - cmd_len, be32_to_cpu(command[1])); + dev_dbg(dev, "sending command (%zd words, cmd=%04x)\n", + cmd_len, be32_to_cpu(command[1])); /* As long as there's something to send */ timeout = msecs_to_jiffies(SBEFIFO_TIMEOUT_START_CMD); @@ -551,21 +552,23 @@ static int sbefifo_read_response(struct sbefifo *sbefifo, struct iov_iter *respo size_t len; int rc; - dev_vdbg(dev, "reading response, buflen = %zd\n", iov_iter_count(response)); + dev_dbg(dev, "reading response, buflen = %zd\n", iov_iter_count(response)); timeout = msecs_to_jiffies(sbefifo->timeout_start_rsp_ms); for (;;) { /* Grab FIFO status (this will handle parity errors) */ rc = sbefifo_wait(sbefifo, false, &status, timeout); - if (rc < 0) + if (rc < 0) { + dev_dbg(dev, "timeout waiting (%u ms)\n", jiffies_to_msecs(timeout)); return rc; + } timeout = msecs_to_jiffies(SBEFIFO_TIMEOUT_IN_RSP); /* Decode status */ len = sbefifo_populated(status); eot_set = sbefifo_eot_set(status); - dev_vdbg(dev, " chunk size %zd eot_set=0x%x\n", len, eot_set); + dev_dbg(dev, " chunk size %zd eot_set=0x%x\n", len, eot_set); /* Go through the chunk */ while(len--) { diff --git a/drivers/gnss/core.c b/drivers/gnss/core.c index e6f94501cb28..1e82b7967570 100644 --- a/drivers/gnss/core.c +++ b/drivers/gnss/core.c @@ -217,7 +217,7 @@ static void gnss_device_release(struct device *dev) kfree(gdev->write_buf); kfifo_free(&gdev->read_fifo); - ida_simple_remove(&gnss_minors, gdev->id); + ida_free(&gnss_minors, gdev->id); kfree(gdev); } @@ -232,7 +232,7 @@ struct gnss_device *gnss_allocate_device(struct device *parent) if (!gdev) return NULL; - id = ida_simple_get(&gnss_minors, 0, GNSS_MINORS, GFP_KERNEL); + id = ida_alloc_max(&gnss_minors, GNSS_MINORS - 1, GFP_KERNEL); if (id < 0) { kfree(gdev); return NULL; diff --git a/drivers/hwmon/occ/common.c b/drivers/hwmon/occ/common.c index 45407b12db4b..dd690f700d49 100644 --- a/drivers/hwmon/occ/common.c +++ b/drivers/hwmon/occ/common.c @@ -10,6 +10,7 @@ #include <linux/math64.h> #include <linux/module.h> #include <linux/mutex.h> +#include <linux/property.h> #include <linux/sysfs.h> #include <asm/unaligned.h> @@ -1216,8 +1217,16 @@ int occ_setup(struct occ *occ) occ->groups[0] = &occ->group; rc = occ_setup_sysfs(occ); - if (rc) + if (rc) { dev_err(occ->bus_dev, "failed to setup sysfs: %d\n", rc); + return rc; + } + + if (!device_property_read_bool(occ->bus_dev, "ibm,no-poll-on-init")) { + rc = occ_active(occ, true); + if (rc) + occ_shutdown_sysfs(occ); + } return rc; } diff --git a/drivers/hwmon/occ/p9_sbe.c b/drivers/hwmon/occ/p9_sbe.c index c1e0a1d96cd4..96521363b696 100644 --- a/drivers/hwmon/occ/p9_sbe.c +++ b/drivers/hwmon/occ/p9_sbe.c @@ -7,6 +7,7 @@ #include <linux/fsi-occ.h> #include <linux/mm.h> #include <linux/module.h> +#include <linux/mod_devicetable.h> #include <linux/mutex.h> #include <linux/platform_device.h> #include <linux/string.h> @@ -14,6 +15,8 @@ #include "common.h" +#define OCC_CHECKSUM_RETRIES 3 + struct p9_sbe_occ { struct occ occ; bool sbe_error; @@ -80,18 +83,23 @@ done: static int p9_sbe_occ_send_cmd(struct occ *occ, u8 *cmd, size_t len, void *resp, size_t resp_len) { + size_t original_resp_len = resp_len; struct p9_sbe_occ *ctx = to_p9_sbe_occ(occ); - int rc; + int rc, i; - rc = fsi_occ_submit(ctx->sbe, cmd, len, resp, &resp_len); - if (rc < 0) { + for (i = 0; i < OCC_CHECKSUM_RETRIES; ++i) { + rc = fsi_occ_submit(ctx->sbe, cmd, len, resp, &resp_len); + if (rc >= 0) + break; if (resp_len) { if (p9_sbe_occ_save_ffdc(ctx, resp, resp_len)) sysfs_notify(&occ->bus_dev->kobj, NULL, bin_attr_ffdc.attr.name); + return rc; } - - return rc; + if (rc != -EBADE) + return rc; + resp_len = original_resp_len; } switch (((struct occ_response *)resp)->return_status) { @@ -174,9 +182,17 @@ static int p9_sbe_occ_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id p9_sbe_occ_of_match[] = { + { .compatible = "ibm,p9-occ-hwmon" }, + { .compatible = "ibm,p10-occ-hwmon" }, + {} +}; +MODULE_DEVICE_TABLE(of, p9_sbe_occ_of_match); + static struct platform_driver p9_sbe_occ_driver = { .driver = { .name = "occ-hwmon", + .of_match_table = p9_sbe_occ_of_match, }, .probe = p9_sbe_occ_probe, .remove = p9_sbe_occ_remove, diff --git a/drivers/hwtracing/Kconfig b/drivers/hwtracing/Kconfig index 13085835a636..911ee977103c 100644 --- a/drivers/hwtracing/Kconfig +++ b/drivers/hwtracing/Kconfig @@ -5,4 +5,6 @@ source "drivers/hwtracing/stm/Kconfig" source "drivers/hwtracing/intel_th/Kconfig" +source "drivers/hwtracing/ptt/Kconfig" + endmenu diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig index 514a9b8086e3..45c1eb5dfcb7 100644 --- a/drivers/hwtracing/coresight/Kconfig +++ b/drivers/hwtracing/coresight/Kconfig @@ -193,10 +193,10 @@ config CORESIGHT_TRBE depends on ARM64 && CORESIGHT_SOURCE_ETM4X help This driver provides support for percpu Trace Buffer Extension (TRBE). - TRBE always needs to be used along with it's corresponding percpu ETE + TRBE always needs to be used along with its corresponding percpu ETE component. ETE generates trace data which is then captured with TRBE. Unlike traditional sink devices, TRBE is a CPU feature accessible via - system registers. But it's explicit dependency with trace unit (ETE) + system registers. But its explicit dependency with trace unit (ETE) requires it to be plugged in as a coresight sink device. To compile this driver as a module, choose M here: the module will be diff --git a/drivers/hwtracing/coresight/coresight-catu.c b/drivers/hwtracing/coresight/coresight-catu.c index e0740c6dbd54..bc90a03f478f 100644 --- a/drivers/hwtracing/coresight/coresight-catu.c +++ b/drivers/hwtracing/coresight/coresight-catu.c @@ -365,26 +365,15 @@ static const struct etr_buf_operations etr_catu_buf_ops = { .get_data = catu_get_data_etr_buf, }; -coresight_simple_reg32(struct catu_drvdata, devid, CORESIGHT_DEVID); -coresight_simple_reg32(struct catu_drvdata, control, CATU_CONTROL); -coresight_simple_reg32(struct catu_drvdata, status, CATU_STATUS); -coresight_simple_reg32(struct catu_drvdata, mode, CATU_MODE); -coresight_simple_reg32(struct catu_drvdata, axictrl, CATU_AXICTRL); -coresight_simple_reg32(struct catu_drvdata, irqen, CATU_IRQEN); -coresight_simple_reg64(struct catu_drvdata, sladdr, - CATU_SLADDRLO, CATU_SLADDRHI); -coresight_simple_reg64(struct catu_drvdata, inaddr, - CATU_INADDRLO, CATU_INADDRHI); - static struct attribute *catu_mgmt_attrs[] = { - &dev_attr_devid.attr, - &dev_attr_control.attr, - &dev_attr_status.attr, - &dev_attr_mode.attr, - &dev_attr_axictrl.attr, - &dev_attr_irqen.attr, - &dev_attr_sladdr.attr, - &dev_attr_inaddr.attr, + coresight_simple_reg32(devid, CORESIGHT_DEVID), + coresight_simple_reg32(control, CATU_CONTROL), + coresight_simple_reg32(status, CATU_STATUS), + coresight_simple_reg32(mode, CATU_MODE), + coresight_simple_reg32(axictrl, CATU_AXICTRL), + coresight_simple_reg32(irqen, CATU_IRQEN), + coresight_simple_reg64(sladdr, CATU_SLADDRLO, CATU_SLADDRHI), + coresight_simple_reg64(inaddr, CATU_INADDRLO, CATU_INADDRHI), NULL, }; diff --git a/drivers/hwtracing/coresight/coresight-catu.h b/drivers/hwtracing/coresight/coresight-catu.h index 6160c2d75a56..442e034bbfba 100644 --- a/drivers/hwtracing/coresight/coresight-catu.h +++ b/drivers/hwtracing/coresight/coresight-catu.h @@ -70,24 +70,24 @@ struct catu_drvdata { static inline u32 \ catu_read_##name(struct catu_drvdata *drvdata) \ { \ - return coresight_read_reg_pair(drvdata->base, offset, -1); \ + return csdev_access_relaxed_read32(&drvdata->csdev->access, offset); \ } \ static inline void \ catu_write_##name(struct catu_drvdata *drvdata, u32 val) \ { \ - coresight_write_reg_pair(drvdata->base, val, offset, -1); \ + csdev_access_relaxed_write32(&drvdata->csdev->access, val, offset); \ } #define CATU_REG_PAIR(name, lo_off, hi_off) \ static inline u64 \ catu_read_##name(struct catu_drvdata *drvdata) \ { \ - return coresight_read_reg_pair(drvdata->base, lo_off, hi_off); \ + return csdev_access_relaxed_read_pair(&drvdata->csdev->access, lo_off, hi_off); \ } \ static inline void \ catu_write_##name(struct catu_drvdata *drvdata, u64 val) \ { \ - coresight_write_reg_pair(drvdata->base, val, lo_off, hi_off); \ + csdev_access_relaxed_write_pair(&drvdata->csdev->access, val, lo_off, hi_off); \ } CATU_REG32(control, CATU_CONTROL); diff --git a/drivers/hwtracing/coresight/coresight-core.c b/drivers/hwtracing/coresight/coresight-core.c index 1edfec1e9d18..d5dbc67bacb4 100644 --- a/drivers/hwtracing/coresight/coresight-core.c +++ b/drivers/hwtracing/coresight/coresight-core.c @@ -60,6 +60,34 @@ EXPORT_SYMBOL_GPL(coresight_barrier_pkt); static const struct cti_assoc_op *cti_assoc_ops; +ssize_t coresight_simple_show_pair(struct device *_dev, + struct device_attribute *attr, char *buf) +{ + struct coresight_device *csdev = container_of(_dev, struct coresight_device, dev); + struct cs_pair_attribute *cs_attr = container_of(attr, struct cs_pair_attribute, attr); + u64 val; + + pm_runtime_get_sync(_dev->parent); + val = csdev_access_relaxed_read_pair(&csdev->access, cs_attr->lo_off, cs_attr->hi_off); + pm_runtime_put_sync(_dev->parent); + return sysfs_emit(buf, "0x%llx\n", val); +} +EXPORT_SYMBOL_GPL(coresight_simple_show_pair); + +ssize_t coresight_simple_show32(struct device *_dev, + struct device_attribute *attr, char *buf) +{ + struct coresight_device *csdev = container_of(_dev, struct coresight_device, dev); + struct cs_off_attribute *cs_attr = container_of(attr, struct cs_off_attribute, attr); + u64 val; + + pm_runtime_get_sync(_dev->parent); + val = csdev_access_relaxed_read32(&csdev->access, cs_attr->off); + pm_runtime_put_sync(_dev->parent); + return sysfs_emit(buf, "0x%llx\n", val); +} +EXPORT_SYMBOL_GPL(coresight_simple_show32); + void coresight_set_cti_ops(const struct cti_assoc_op *cti_op) { cti_assoc_ops = cti_op; diff --git a/drivers/hwtracing/coresight/coresight-cti-sysfs.c b/drivers/hwtracing/coresight/coresight-cti-sysfs.c index 7ff7e7780bbf..6d59c815ecf5 100644 --- a/drivers/hwtracing/coresight/coresight-cti-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-cti-sysfs.c @@ -163,48 +163,82 @@ static struct attribute *coresight_cti_attrs[] = { /* register based attributes */ -/* macro to access RO registers with power check only (no enable check). */ -#define coresight_cti_reg(name, offset) \ -static ssize_t name##_show(struct device *dev, \ - struct device_attribute *attr, char *buf) \ -{ \ - struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); \ - u32 val = 0; \ - pm_runtime_get_sync(dev->parent); \ - spin_lock(&drvdata->spinlock); \ - if (drvdata->config.hw_powered) \ - val = readl_relaxed(drvdata->base + offset); \ - spin_unlock(&drvdata->spinlock); \ - pm_runtime_put_sync(dev->parent); \ - return sprintf(buf, "0x%x\n", val); \ -} \ -static DEVICE_ATTR_RO(name) +/* Read registers with power check only (no enable check). */ +static ssize_t coresight_cti_reg_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); + struct cs_off_attribute *cti_attr = container_of(attr, struct cs_off_attribute, attr); + u32 val = 0; -/* coresight management registers */ -coresight_cti_reg(devaff0, CTIDEVAFF0); -coresight_cti_reg(devaff1, CTIDEVAFF1); -coresight_cti_reg(authstatus, CORESIGHT_AUTHSTATUS); -coresight_cti_reg(devarch, CORESIGHT_DEVARCH); -coresight_cti_reg(devid, CORESIGHT_DEVID); -coresight_cti_reg(devtype, CORESIGHT_DEVTYPE); -coresight_cti_reg(pidr0, CORESIGHT_PERIPHIDR0); -coresight_cti_reg(pidr1, CORESIGHT_PERIPHIDR1); -coresight_cti_reg(pidr2, CORESIGHT_PERIPHIDR2); -coresight_cti_reg(pidr3, CORESIGHT_PERIPHIDR3); -coresight_cti_reg(pidr4, CORESIGHT_PERIPHIDR4); + pm_runtime_get_sync(dev->parent); + spin_lock(&drvdata->spinlock); + if (drvdata->config.hw_powered) + val = readl_relaxed(drvdata->base + cti_attr->off); + spin_unlock(&drvdata->spinlock); + pm_runtime_put_sync(dev->parent); + return sysfs_emit(buf, "0x%x\n", val); +} +/* Write registers with power check only (no enable check). */ +static __maybe_unused ssize_t coresight_cti_reg_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); + struct cs_off_attribute *cti_attr = container_of(attr, struct cs_off_attribute, attr); + unsigned long val = 0; + + if (kstrtoul(buf, 0, &val)) + return -EINVAL; + + pm_runtime_get_sync(dev->parent); + spin_lock(&drvdata->spinlock); + if (drvdata->config.hw_powered) + cti_write_single_reg(drvdata, cti_attr->off, val); + spin_unlock(&drvdata->spinlock); + pm_runtime_put_sync(dev->parent); + return size; +} + +#define coresight_cti_reg(name, offset) \ + (&((struct cs_off_attribute[]) { \ + { \ + __ATTR(name, 0444, coresight_cti_reg_show, NULL), \ + offset \ + } \ + })[0].attr.attr) + +#define coresight_cti_reg_rw(name, offset) \ + (&((struct cs_off_attribute[]) { \ + { \ + __ATTR(name, 0644, coresight_cti_reg_show, \ + coresight_cti_reg_store), \ + offset \ + } \ + })[0].attr.attr) + +#define coresight_cti_reg_wo(name, offset) \ + (&((struct cs_off_attribute[]) { \ + { \ + __ATTR(name, 0200, NULL, coresight_cti_reg_store), \ + offset \ + } \ + })[0].attr.attr) + +/* coresight management registers */ static struct attribute *coresight_cti_mgmt_attrs[] = { - &dev_attr_devaff0.attr, - &dev_attr_devaff1.attr, - &dev_attr_authstatus.attr, - &dev_attr_devarch.attr, - &dev_attr_devid.attr, - &dev_attr_devtype.attr, - &dev_attr_pidr0.attr, - &dev_attr_pidr1.attr, - &dev_attr_pidr2.attr, - &dev_attr_pidr3.attr, - &dev_attr_pidr4.attr, + coresight_cti_reg(devaff0, CTIDEVAFF0), + coresight_cti_reg(devaff1, CTIDEVAFF1), + coresight_cti_reg(authstatus, CORESIGHT_AUTHSTATUS), + coresight_cti_reg(devarch, CORESIGHT_DEVARCH), + coresight_cti_reg(devid, CORESIGHT_DEVID), + coresight_cti_reg(devtype, CORESIGHT_DEVTYPE), + coresight_cti_reg(pidr0, CORESIGHT_PERIPHIDR0), + coresight_cti_reg(pidr1, CORESIGHT_PERIPHIDR1), + coresight_cti_reg(pidr2, CORESIGHT_PERIPHIDR2), + coresight_cti_reg(pidr3, CORESIGHT_PERIPHIDR3), + coresight_cti_reg(pidr4, CORESIGHT_PERIPHIDR4), NULL, }; @@ -454,86 +488,11 @@ static ssize_t apppulse_store(struct device *dev, } static DEVICE_ATTR_WO(apppulse); -coresight_cti_reg(triginstatus, CTITRIGINSTATUS); -coresight_cti_reg(trigoutstatus, CTITRIGOUTSTATUS); -coresight_cti_reg(chinstatus, CTICHINSTATUS); -coresight_cti_reg(choutstatus, CTICHOUTSTATUS); - /* * Define CONFIG_CORESIGHT_CTI_INTEGRATION_REGS to enable the access to the * integration control registers. Normally only used to investigate connection * data. */ -#ifdef CONFIG_CORESIGHT_CTI_INTEGRATION_REGS - -/* macro to access RW registers with power check only (no enable check). */ -#define coresight_cti_reg_rw(name, offset) \ -static ssize_t name##_show(struct device *dev, \ - struct device_attribute *attr, char *buf) \ -{ \ - struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); \ - u32 val = 0; \ - pm_runtime_get_sync(dev->parent); \ - spin_lock(&drvdata->spinlock); \ - if (drvdata->config.hw_powered) \ - val = readl_relaxed(drvdata->base + offset); \ - spin_unlock(&drvdata->spinlock); \ - pm_runtime_put_sync(dev->parent); \ - return sprintf(buf, "0x%x\n", val); \ -} \ - \ -static ssize_t name##_store(struct device *dev, \ - struct device_attribute *attr, \ - const char *buf, size_t size) \ -{ \ - struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); \ - unsigned long val = 0; \ - if (kstrtoul(buf, 0, &val)) \ - return -EINVAL; \ - \ - pm_runtime_get_sync(dev->parent); \ - spin_lock(&drvdata->spinlock); \ - if (drvdata->config.hw_powered) \ - cti_write_single_reg(drvdata, offset, val); \ - spin_unlock(&drvdata->spinlock); \ - pm_runtime_put_sync(dev->parent); \ - return size; \ -} \ -static DEVICE_ATTR_RW(name) - -/* macro to access WO registers with power check only (no enable check). */ -#define coresight_cti_reg_wo(name, offset) \ -static ssize_t name##_store(struct device *dev, \ - struct device_attribute *attr, \ - const char *buf, size_t size) \ -{ \ - struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); \ - unsigned long val = 0; \ - if (kstrtoul(buf, 0, &val)) \ - return -EINVAL; \ - \ - pm_runtime_get_sync(dev->parent); \ - spin_lock(&drvdata->spinlock); \ - if (drvdata->config.hw_powered) \ - cti_write_single_reg(drvdata, offset, val); \ - spin_unlock(&drvdata->spinlock); \ - pm_runtime_put_sync(dev->parent); \ - return size; \ -} \ -static DEVICE_ATTR_WO(name) - -coresight_cti_reg_rw(itchout, ITCHOUT); -coresight_cti_reg_rw(ittrigout, ITTRIGOUT); -coresight_cti_reg_rw(itctrl, CORESIGHT_ITCTRL); -coresight_cti_reg_wo(itchinack, ITCHINACK); -coresight_cti_reg_wo(ittriginack, ITTRIGINACK); -coresight_cti_reg(ittrigin, ITTRIGIN); -coresight_cti_reg(itchin, ITCHIN); -coresight_cti_reg(itchoutack, ITCHOUTACK); -coresight_cti_reg(ittrigoutack, ITTRIGOUTACK); - -#endif /* CORESIGHT_CTI_INTEGRATION_REGS */ - static struct attribute *coresight_cti_regs_attrs[] = { &dev_attr_inout_sel.attr, &dev_attr_inen.attr, @@ -544,20 +503,20 @@ static struct attribute *coresight_cti_regs_attrs[] = { &dev_attr_appset.attr, &dev_attr_appclear.attr, &dev_attr_apppulse.attr, - &dev_attr_triginstatus.attr, - &dev_attr_trigoutstatus.attr, - &dev_attr_chinstatus.attr, - &dev_attr_choutstatus.attr, + coresight_cti_reg(triginstatus, CTITRIGINSTATUS), + coresight_cti_reg(trigoutstatus, CTITRIGOUTSTATUS), + coresight_cti_reg(chinstatus, CTICHINSTATUS), + coresight_cti_reg(choutstatus, CTICHOUTSTATUS), #ifdef CONFIG_CORESIGHT_CTI_INTEGRATION_REGS - &dev_attr_itctrl.attr, - &dev_attr_ittrigin.attr, - &dev_attr_itchin.attr, - &dev_attr_ittrigout.attr, - &dev_attr_itchout.attr, - &dev_attr_itchoutack.attr, - &dev_attr_ittrigoutack.attr, - &dev_attr_ittriginack.attr, - &dev_attr_itchinack.attr, + coresight_cti_reg_rw(itctrl, CORESIGHT_ITCTRL), + coresight_cti_reg(ittrigin, ITTRIGIN), + coresight_cti_reg(itchin, ITCHIN), + coresight_cti_reg_rw(ittrigout, ITTRIGOUT), + coresight_cti_reg_rw(itchout, ITCHOUT), + coresight_cti_reg(itchoutack, ITCHOUTACK), + coresight_cti_reg(ittrigoutack, ITTRIGOUTACK), + coresight_cti_reg_wo(ittriginack, ITTRIGINACK), + coresight_cti_reg_wo(itchinack, ITCHINACK), #endif NULL, }; diff --git a/drivers/hwtracing/coresight/coresight-etb10.c b/drivers/hwtracing/coresight/coresight-etb10.c index efa39820acec..8aa6e4f83e42 100644 --- a/drivers/hwtracing/coresight/coresight-etb10.c +++ b/drivers/hwtracing/coresight/coresight-etb10.c @@ -655,27 +655,15 @@ static const struct file_operations etb_fops = { .llseek = no_llseek, }; -#define coresight_etb10_reg(name, offset) \ - coresight_simple_reg32(struct etb_drvdata, name, offset) - -coresight_etb10_reg(rdp, ETB_RAM_DEPTH_REG); -coresight_etb10_reg(sts, ETB_STATUS_REG); -coresight_etb10_reg(rrp, ETB_RAM_READ_POINTER); -coresight_etb10_reg(rwp, ETB_RAM_WRITE_POINTER); -coresight_etb10_reg(trg, ETB_TRG); -coresight_etb10_reg(ctl, ETB_CTL_REG); -coresight_etb10_reg(ffsr, ETB_FFSR); -coresight_etb10_reg(ffcr, ETB_FFCR); - static struct attribute *coresight_etb_mgmt_attrs[] = { - &dev_attr_rdp.attr, - &dev_attr_sts.attr, - &dev_attr_rrp.attr, - &dev_attr_rwp.attr, - &dev_attr_trg.attr, - &dev_attr_ctl.attr, - &dev_attr_ffsr.attr, - &dev_attr_ffcr.attr, + coresight_simple_reg32(rdp, ETB_RAM_DEPTH_REG), + coresight_simple_reg32(sts, ETB_STATUS_REG), + coresight_simple_reg32(rrp, ETB_RAM_READ_POINTER), + coresight_simple_reg32(rwp, ETB_RAM_WRITE_POINTER), + coresight_simple_reg32(trg, ETB_TRG), + coresight_simple_reg32(ctl, ETB_CTL_REG), + coresight_simple_reg32(ffsr, ETB_FFSR), + coresight_simple_reg32(ffcr, ETB_FFCR), NULL, }; diff --git a/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c index 68fcbf4ce7a8..fd81eca3ec18 100644 --- a/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c @@ -1252,31 +1252,17 @@ static struct attribute *coresight_etm_attrs[] = { NULL, }; -#define coresight_etm3x_reg(name, offset) \ - coresight_simple_reg32(struct etm_drvdata, name, offset) - -coresight_etm3x_reg(etmccr, ETMCCR); -coresight_etm3x_reg(etmccer, ETMCCER); -coresight_etm3x_reg(etmscr, ETMSCR); -coresight_etm3x_reg(etmidr, ETMIDR); -coresight_etm3x_reg(etmcr, ETMCR); -coresight_etm3x_reg(etmtraceidr, ETMTRACEIDR); -coresight_etm3x_reg(etmteevr, ETMTEEVR); -coresight_etm3x_reg(etmtssvr, ETMTSSCR); -coresight_etm3x_reg(etmtecr1, ETMTECR1); -coresight_etm3x_reg(etmtecr2, ETMTECR2); - static struct attribute *coresight_etm_mgmt_attrs[] = { - &dev_attr_etmccr.attr, - &dev_attr_etmccer.attr, - &dev_attr_etmscr.attr, - &dev_attr_etmidr.attr, - &dev_attr_etmcr.attr, - &dev_attr_etmtraceidr.attr, - &dev_attr_etmteevr.attr, - &dev_attr_etmtssvr.attr, - &dev_attr_etmtecr1.attr, - &dev_attr_etmtecr2.attr, + coresight_simple_reg32(etmccr, ETMCCR), + coresight_simple_reg32(etmccer, ETMCCER), + coresight_simple_reg32(etmscr, ETMSCR), + coresight_simple_reg32(etmidr, ETMIDR), + coresight_simple_reg32(etmcr, ETMCR), + coresight_simple_reg32(etmtraceidr, ETMTRACEIDR), + coresight_simple_reg32(etmteevr, ETMTEEVR), + coresight_simple_reg32(etmtssvr, ETMTSSCR), + coresight_simple_reg32(etmtecr1, ETMTECR1), + coresight_simple_reg32(etmtecr2, ETMTECR2), NULL, }; diff --git a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c index 6ea8181816fc..9cac848cffaf 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c @@ -2306,6 +2306,34 @@ static ssize_t cpu_show(struct device *dev, } static DEVICE_ATTR_RO(cpu); +static ssize_t ts_source_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int val; + struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent); + + if (!drvdata->trfcr) { + val = -1; + goto out; + } + + switch (drvdata->trfcr & TRFCR_ELx_TS_MASK) { + case TRFCR_ELx_TS_VIRTUAL: + case TRFCR_ELx_TS_GUEST_PHYSICAL: + case TRFCR_ELx_TS_PHYSICAL: + val = FIELD_GET(TRFCR_ELx_TS_MASK, drvdata->trfcr); + break; + default: + val = -1; + break; + } + +out: + return sysfs_emit(buf, "%d\n", val); +} +static DEVICE_ATTR_RO(ts_source); + static struct attribute *coresight_etmv4_attrs[] = { &dev_attr_nr_pe_cmp.attr, &dev_attr_nr_addr_cmp.attr, @@ -2360,6 +2388,7 @@ static struct attribute *coresight_etmv4_attrs[] = { &dev_attr_vmid_val.attr, &dev_attr_vmid_masks.attr, &dev_attr_cpu.attr, + &dev_attr_ts_source.attr, NULL, }; diff --git a/drivers/hwtracing/coresight/coresight-priv.h b/drivers/hwtracing/coresight/coresight-priv.h index ff1dd2092ac5..595ce5862056 100644 --- a/drivers/hwtracing/coresight/coresight-priv.h +++ b/drivers/hwtracing/coresight/coresight-priv.h @@ -39,32 +39,37 @@ #define ETM_MODE_EXCL_KERN BIT(30) #define ETM_MODE_EXCL_USER BIT(31) +struct cs_pair_attribute { + struct device_attribute attr; + u32 lo_off; + u32 hi_off; +}; + +struct cs_off_attribute { + struct device_attribute attr; + u32 off; +}; -typedef u32 (*coresight_read_fn)(const struct device *, u32 offset); -#define __coresight_simple_func(type, func, name, lo_off, hi_off) \ -static ssize_t name##_show(struct device *_dev, \ - struct device_attribute *attr, char *buf) \ -{ \ - type *drvdata = dev_get_drvdata(_dev->parent); \ - coresight_read_fn fn = func; \ - u64 val; \ - pm_runtime_get_sync(_dev->parent); \ - if (fn) \ - val = (u64)fn(_dev->parent, lo_off); \ - else \ - val = coresight_read_reg_pair(drvdata->base, \ - lo_off, hi_off); \ - pm_runtime_put_sync(_dev->parent); \ - return scnprintf(buf, PAGE_SIZE, "0x%llx\n", val); \ -} \ -static DEVICE_ATTR_RO(name) - -#define coresight_simple_func(type, func, name, offset) \ - __coresight_simple_func(type, func, name, offset, -1) -#define coresight_simple_reg32(type, name, offset) \ - __coresight_simple_func(type, NULL, name, offset, -1) -#define coresight_simple_reg64(type, name, lo_off, hi_off) \ - __coresight_simple_func(type, NULL, name, lo_off, hi_off) +extern ssize_t coresight_simple_show32(struct device *_dev, + struct device_attribute *attr, char *buf); +extern ssize_t coresight_simple_show_pair(struct device *_dev, + struct device_attribute *attr, char *buf); + +#define coresight_simple_reg32(name, offset) \ + (&((struct cs_off_attribute[]) { \ + { \ + __ATTR(name, 0444, coresight_simple_show32, NULL), \ + offset \ + } \ + })[0].attr.attr) + +#define coresight_simple_reg64(name, lo_off, hi_off) \ + (&((struct cs_pair_attribute[]) { \ + { \ + __ATTR(name, 0444, coresight_simple_show_pair, NULL), \ + lo_off, hi_off \ + } \ + })[0].attr.attr) extern const u32 coresight_barrier_pkt[4]; #define CORESIGHT_BARRIER_PKT_SIZE (sizeof(coresight_barrier_pkt)) @@ -127,25 +132,6 @@ static inline void CS_UNLOCK(void __iomem *addr) } while (0); } -static inline u64 -coresight_read_reg_pair(void __iomem *addr, s32 lo_offset, s32 hi_offset) -{ - u64 val; - - val = readl_relaxed(addr + lo_offset); - val |= (hi_offset < 0) ? 0 : - (u64)readl_relaxed(addr + hi_offset) << 32; - return val; -} - -static inline void coresight_write_reg_pair(void __iomem *addr, u64 val, - s32 lo_offset, s32 hi_offset) -{ - writel_relaxed((u32)val, addr + lo_offset); - if (hi_offset >= 0) - writel_relaxed((u32)(val >> 32), addr + hi_offset); -} - void coresight_disable_path(struct list_head *path); int coresight_enable_path(struct list_head *path, u32 mode, void *sink_data); struct coresight_device *coresight_get_sink(struct list_head *path); diff --git a/drivers/hwtracing/coresight/coresight-replicator.c b/drivers/hwtracing/coresight/coresight-replicator.c index b86acbc74cf0..4dd50546d7e4 100644 --- a/drivers/hwtracing/coresight/coresight-replicator.c +++ b/drivers/hwtracing/coresight/coresight-replicator.c @@ -196,15 +196,9 @@ static const struct coresight_ops replicator_cs_ops = { .link_ops = &replicator_link_ops, }; -#define coresight_replicator_reg(name, offset) \ - coresight_simple_reg32(struct replicator_drvdata, name, offset) - -coresight_replicator_reg(idfilter0, REPLICATOR_IDFILTER0); -coresight_replicator_reg(idfilter1, REPLICATOR_IDFILTER1); - static struct attribute *replicator_mgmt_attrs[] = { - &dev_attr_idfilter0.attr, - &dev_attr_idfilter1.attr, + coresight_simple_reg32(idfilter0, REPLICATOR_IDFILTER0), + coresight_simple_reg32(idfilter1, REPLICATOR_IDFILTER1), NULL, }; diff --git a/drivers/hwtracing/coresight/coresight-stm.c b/drivers/hwtracing/coresight/coresight-stm.c index bb14a3a8a921..463f449cfb79 100644 --- a/drivers/hwtracing/coresight/coresight-stm.c +++ b/drivers/hwtracing/coresight/coresight-stm.c @@ -634,22 +634,6 @@ static ssize_t traceid_store(struct device *dev, } static DEVICE_ATTR_RW(traceid); -#define coresight_stm_reg(name, offset) \ - coresight_simple_reg32(struct stm_drvdata, name, offset) - -coresight_stm_reg(tcsr, STMTCSR); -coresight_stm_reg(tsfreqr, STMTSFREQR); -coresight_stm_reg(syncr, STMSYNCR); -coresight_stm_reg(sper, STMSPER); -coresight_stm_reg(spter, STMSPTER); -coresight_stm_reg(privmaskr, STMPRIVMASKR); -coresight_stm_reg(spscr, STMSPSCR); -coresight_stm_reg(spmscr, STMSPMSCR); -coresight_stm_reg(spfeat1r, STMSPFEAT1R); -coresight_stm_reg(spfeat2r, STMSPFEAT2R); -coresight_stm_reg(spfeat3r, STMSPFEAT3R); -coresight_stm_reg(devid, CORESIGHT_DEVID); - static struct attribute *coresight_stm_attrs[] = { &dev_attr_hwevent_enable.attr, &dev_attr_hwevent_select.attr, @@ -660,18 +644,18 @@ static struct attribute *coresight_stm_attrs[] = { }; static struct attribute *coresight_stm_mgmt_attrs[] = { - &dev_attr_tcsr.attr, - &dev_attr_tsfreqr.attr, - &dev_attr_syncr.attr, - &dev_attr_sper.attr, - &dev_attr_spter.attr, - &dev_attr_privmaskr.attr, - &dev_attr_spscr.attr, - &dev_attr_spmscr.attr, - &dev_attr_spfeat1r.attr, - &dev_attr_spfeat2r.attr, - &dev_attr_spfeat3r.attr, - &dev_attr_devid.attr, + coresight_simple_reg32(tcsr, STMTCSR), + coresight_simple_reg32(tsfreqr, STMTSFREQR), + coresight_simple_reg32(syncr, STMSYNCR), + coresight_simple_reg32(sper, STMSPER), + coresight_simple_reg32(spter, STMSPTER), + coresight_simple_reg32(privmaskr, STMPRIVMASKR), + coresight_simple_reg32(spscr, STMSPSCR), + coresight_simple_reg32(spmscr, STMSPMSCR), + coresight_simple_reg32(spfeat1r, STMSPFEAT1R), + coresight_simple_reg32(spfeat2r, STMSPFEAT2R), + coresight_simple_reg32(spfeat3r, STMSPFEAT3R), + coresight_simple_reg32(devid, CORESIGHT_DEVID), NULL, }; diff --git a/drivers/hwtracing/coresight/coresight-tmc-core.c b/drivers/hwtracing/coresight/coresight-tmc-core.c index d0276af82494..07abf28ad725 100644 --- a/drivers/hwtracing/coresight/coresight-tmc-core.c +++ b/drivers/hwtracing/coresight/coresight-tmc-core.c @@ -251,41 +251,21 @@ static enum tmc_mem_intf_width tmc_get_memwidth(u32 devid) return memwidth; } -#define coresight_tmc_reg(name, offset) \ - coresight_simple_reg32(struct tmc_drvdata, name, offset) -#define coresight_tmc_reg64(name, lo_off, hi_off) \ - coresight_simple_reg64(struct tmc_drvdata, name, lo_off, hi_off) - -coresight_tmc_reg(rsz, TMC_RSZ); -coresight_tmc_reg(sts, TMC_STS); -coresight_tmc_reg(trg, TMC_TRG); -coresight_tmc_reg(ctl, TMC_CTL); -coresight_tmc_reg(ffsr, TMC_FFSR); -coresight_tmc_reg(ffcr, TMC_FFCR); -coresight_tmc_reg(mode, TMC_MODE); -coresight_tmc_reg(pscr, TMC_PSCR); -coresight_tmc_reg(axictl, TMC_AXICTL); -coresight_tmc_reg(authstatus, TMC_AUTHSTATUS); -coresight_tmc_reg(devid, CORESIGHT_DEVID); -coresight_tmc_reg64(rrp, TMC_RRP, TMC_RRPHI); -coresight_tmc_reg64(rwp, TMC_RWP, TMC_RWPHI); -coresight_tmc_reg64(dba, TMC_DBALO, TMC_DBAHI); - static struct attribute *coresight_tmc_mgmt_attrs[] = { - &dev_attr_rsz.attr, - &dev_attr_sts.attr, - &dev_attr_rrp.attr, - &dev_attr_rwp.attr, - &dev_attr_trg.attr, - &dev_attr_ctl.attr, - &dev_attr_ffsr.attr, - &dev_attr_ffcr.attr, - &dev_attr_mode.attr, - &dev_attr_pscr.attr, - &dev_attr_devid.attr, - &dev_attr_dba.attr, - &dev_attr_axictl.attr, - &dev_attr_authstatus.attr, + coresight_simple_reg32(rsz, TMC_RSZ), + coresight_simple_reg32(sts, TMC_STS), + coresight_simple_reg64(rrp, TMC_RRP, TMC_RRPHI), + coresight_simple_reg64(rwp, TMC_RWP, TMC_RWPHI), + coresight_simple_reg32(trg, TMC_TRG), + coresight_simple_reg32(ctl, TMC_CTL), + coresight_simple_reg32(ffsr, TMC_FFSR), + coresight_simple_reg32(ffcr, TMC_FFCR), + coresight_simple_reg32(mode, TMC_MODE), + coresight_simple_reg32(pscr, TMC_PSCR), + coresight_simple_reg32(devid, CORESIGHT_DEVID), + coresight_simple_reg64(dba, TMC_DBALO, TMC_DBAHI), + coresight_simple_reg32(axictl, TMC_AXICTL), + coresight_simple_reg32(authstatus, TMC_AUTHSTATUS), NULL, }; diff --git a/drivers/hwtracing/coresight/coresight-tmc.h b/drivers/hwtracing/coresight/coresight-tmc.h index 6bec20a392b3..66959557cf39 100644 --- a/drivers/hwtracing/coresight/coresight-tmc.h +++ b/drivers/hwtracing/coresight/coresight-tmc.h @@ -282,12 +282,12 @@ ssize_t tmc_etr_get_sysfs_trace(struct tmc_drvdata *drvdata, static inline u64 \ tmc_read_##name(struct tmc_drvdata *drvdata) \ { \ - return coresight_read_reg_pair(drvdata->base, lo_off, hi_off); \ + return csdev_access_relaxed_read_pair(&drvdata->csdev->access, lo_off, hi_off); \ } \ static inline void \ tmc_write_##name(struct tmc_drvdata *drvdata, u64 val) \ { \ - coresight_write_reg_pair(drvdata->base, val, lo_off, hi_off); \ + csdev_access_relaxed_write_pair(&drvdata->csdev->access, val, lo_off, hi_off); \ } TMC_REG_PAIR(rrp, TMC_RRP, TMC_RRPHI) diff --git a/drivers/hwtracing/ptt/Kconfig b/drivers/hwtracing/ptt/Kconfig new file mode 100644 index 000000000000..6d46a09ffeb9 --- /dev/null +++ b/drivers/hwtracing/ptt/Kconfig @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0-only +config HISI_PTT + tristate "HiSilicon PCIe Tune and Trace Device" + depends on ARM64 || (COMPILE_TEST && 64BIT) + depends on PCI && HAS_DMA && HAS_IOMEM && PERF_EVENTS + help + HiSilicon PCIe Tune and Trace device exists as a PCIe RCiEP + device, and it provides support for PCIe traffic tuning and + tracing TLP headers to the memory. + + This driver can also be built as a module. If so, the module + will be called hisi_ptt. diff --git a/drivers/hwtracing/ptt/Makefile b/drivers/hwtracing/ptt/Makefile new file mode 100644 index 000000000000..908c09a98161 --- /dev/null +++ b/drivers/hwtracing/ptt/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_HISI_PTT) += hisi_ptt.o diff --git a/drivers/hwtracing/ptt/hisi_ptt.c b/drivers/hwtracing/ptt/hisi_ptt.c new file mode 100644 index 000000000000..5d5526aa60c4 --- /dev/null +++ b/drivers/hwtracing/ptt/hisi_ptt.c @@ -0,0 +1,1046 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for HiSilicon PCIe tune and trace device + * + * Copyright (c) 2022 HiSilicon Technologies Co., Ltd. + * Author: Yicong Yang <yangyicong@hisilicon.com> + */ + +#include <linux/bitfield.h> +#include <linux/bitops.h> +#include <linux/cpuhotplug.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/iommu.h> +#include <linux/iopoll.h> +#include <linux/module.h> +#include <linux/sysfs.h> +#include <linux/vmalloc.h> + +#include "hisi_ptt.h" + +/* Dynamic CPU hotplug state used by PTT */ +static enum cpuhp_state hisi_ptt_pmu_online; + +static bool hisi_ptt_wait_tuning_finish(struct hisi_ptt *hisi_ptt) +{ + u32 val; + + return !readl_poll_timeout(hisi_ptt->iobase + HISI_PTT_TUNING_INT_STAT, + val, !(val & HISI_PTT_TUNING_INT_STAT_MASK), + HISI_PTT_WAIT_POLL_INTERVAL_US, + HISI_PTT_WAIT_TUNE_TIMEOUT_US); +} + +static ssize_t hisi_ptt_tune_attr_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct hisi_ptt *hisi_ptt = to_hisi_ptt(dev_get_drvdata(dev)); + struct dev_ext_attribute *ext_attr; + struct hisi_ptt_tune_desc *desc; + u32 reg; + u16 val; + + ext_attr = container_of(attr, struct dev_ext_attribute, attr); + desc = ext_attr->var; + + mutex_lock(&hisi_ptt->tune_lock); + + reg = readl(hisi_ptt->iobase + HISI_PTT_TUNING_CTRL); + reg &= ~(HISI_PTT_TUNING_CTRL_CODE | HISI_PTT_TUNING_CTRL_SUB); + reg |= FIELD_PREP(HISI_PTT_TUNING_CTRL_CODE | HISI_PTT_TUNING_CTRL_SUB, + desc->event_code); + writel(reg, hisi_ptt->iobase + HISI_PTT_TUNING_CTRL); + + /* Write all 1 to indicates it's the read process */ + writel(~0U, hisi_ptt->iobase + HISI_PTT_TUNING_DATA); + + if (!hisi_ptt_wait_tuning_finish(hisi_ptt)) { + mutex_unlock(&hisi_ptt->tune_lock); + return -ETIMEDOUT; + } + + reg = readl(hisi_ptt->iobase + HISI_PTT_TUNING_DATA); + reg &= HISI_PTT_TUNING_DATA_VAL_MASK; + val = FIELD_GET(HISI_PTT_TUNING_DATA_VAL_MASK, reg); + + mutex_unlock(&hisi_ptt->tune_lock); + return sysfs_emit(buf, "%u\n", val); +} + +static ssize_t hisi_ptt_tune_attr_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct hisi_ptt *hisi_ptt = to_hisi_ptt(dev_get_drvdata(dev)); + struct dev_ext_attribute *ext_attr; + struct hisi_ptt_tune_desc *desc; + u32 reg; + u16 val; + + ext_attr = container_of(attr, struct dev_ext_attribute, attr); + desc = ext_attr->var; + + if (kstrtou16(buf, 10, &val)) + return -EINVAL; + + mutex_lock(&hisi_ptt->tune_lock); + + reg = readl(hisi_ptt->iobase + HISI_PTT_TUNING_CTRL); + reg &= ~(HISI_PTT_TUNING_CTRL_CODE | HISI_PTT_TUNING_CTRL_SUB); + reg |= FIELD_PREP(HISI_PTT_TUNING_CTRL_CODE | HISI_PTT_TUNING_CTRL_SUB, + desc->event_code); + writel(reg, hisi_ptt->iobase + HISI_PTT_TUNING_CTRL); + writel(FIELD_PREP(HISI_PTT_TUNING_DATA_VAL_MASK, val), + hisi_ptt->iobase + HISI_PTT_TUNING_DATA); + + if (!hisi_ptt_wait_tuning_finish(hisi_ptt)) { + mutex_unlock(&hisi_ptt->tune_lock); + return -ETIMEDOUT; + } + + mutex_unlock(&hisi_ptt->tune_lock); + return count; +} + +#define HISI_PTT_TUNE_ATTR(_name, _val, _show, _store) \ + static struct hisi_ptt_tune_desc _name##_desc = { \ + .name = #_name, \ + .event_code = (_val), \ + }; \ + static struct dev_ext_attribute hisi_ptt_##_name##_attr = { \ + .attr = __ATTR(_name, 0600, _show, _store), \ + .var = &_name##_desc, \ + } + +#define HISI_PTT_TUNE_ATTR_COMMON(_name, _val) \ + HISI_PTT_TUNE_ATTR(_name, _val, \ + hisi_ptt_tune_attr_show, \ + hisi_ptt_tune_attr_store) + +/* + * The value of the tuning event are composed of two parts: main event code + * in BIT[0,15] and subevent code in BIT[16,23]. For example, qox_tx_cpl is + * a subevent of 'Tx path QoS control' which for tuning the weight of Tx + * completion TLPs. See hisi_ptt.rst documentation for more information. + */ +#define HISI_PTT_TUNE_QOS_TX_CPL (0x4 | (3 << 16)) +#define HISI_PTT_TUNE_QOS_TX_NP (0x4 | (4 << 16)) +#define HISI_PTT_TUNE_QOS_TX_P (0x4 | (5 << 16)) +#define HISI_PTT_TUNE_RX_ALLOC_BUF_LEVEL (0x5 | (6 << 16)) +#define HISI_PTT_TUNE_TX_ALLOC_BUF_LEVEL (0x5 | (7 << 16)) + +HISI_PTT_TUNE_ATTR_COMMON(qos_tx_cpl, HISI_PTT_TUNE_QOS_TX_CPL); +HISI_PTT_TUNE_ATTR_COMMON(qos_tx_np, HISI_PTT_TUNE_QOS_TX_NP); +HISI_PTT_TUNE_ATTR_COMMON(qos_tx_p, HISI_PTT_TUNE_QOS_TX_P); +HISI_PTT_TUNE_ATTR_COMMON(rx_alloc_buf_level, HISI_PTT_TUNE_RX_ALLOC_BUF_LEVEL); +HISI_PTT_TUNE_ATTR_COMMON(tx_alloc_buf_level, HISI_PTT_TUNE_TX_ALLOC_BUF_LEVEL); + +static struct attribute *hisi_ptt_tune_attrs[] = { + &hisi_ptt_qos_tx_cpl_attr.attr.attr, + &hisi_ptt_qos_tx_np_attr.attr.attr, + &hisi_ptt_qos_tx_p_attr.attr.attr, + &hisi_ptt_rx_alloc_buf_level_attr.attr.attr, + &hisi_ptt_tx_alloc_buf_level_attr.attr.attr, + NULL, +}; + +static struct attribute_group hisi_ptt_tune_group = { + .name = "tune", + .attrs = hisi_ptt_tune_attrs, +}; + +static u16 hisi_ptt_get_filter_val(u16 devid, bool is_port) +{ + if (is_port) + return BIT(HISI_PCIE_CORE_PORT_ID(devid & 0xff)); + + return devid; +} + +static bool hisi_ptt_wait_trace_hw_idle(struct hisi_ptt *hisi_ptt) +{ + u32 val; + + return !readl_poll_timeout_atomic(hisi_ptt->iobase + HISI_PTT_TRACE_STS, + val, val & HISI_PTT_TRACE_IDLE, + HISI_PTT_WAIT_POLL_INTERVAL_US, + HISI_PTT_WAIT_TRACE_TIMEOUT_US); +} + +static void hisi_ptt_wait_dma_reset_done(struct hisi_ptt *hisi_ptt) +{ + u32 val; + + readl_poll_timeout_atomic(hisi_ptt->iobase + HISI_PTT_TRACE_WR_STS, + val, !val, HISI_PTT_RESET_POLL_INTERVAL_US, + HISI_PTT_RESET_TIMEOUT_US); +} + +static void hisi_ptt_trace_end(struct hisi_ptt *hisi_ptt) +{ + writel(0, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL); + hisi_ptt->trace_ctrl.started = false; +} + +static int hisi_ptt_trace_start(struct hisi_ptt *hisi_ptt) +{ + struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl; + u32 val; + int i; + + /* Check device idle before start trace */ + if (!hisi_ptt_wait_trace_hw_idle(hisi_ptt)) { + pci_err(hisi_ptt->pdev, "Failed to start trace, the device is still busy\n"); + return -EBUSY; + } + + ctrl->started = true; + + /* Reset the DMA before start tracing */ + val = readl(hisi_ptt->iobase + HISI_PTT_TRACE_CTRL); + val |= HISI_PTT_TRACE_CTRL_RST; + writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL); + + hisi_ptt_wait_dma_reset_done(hisi_ptt); + + val = readl(hisi_ptt->iobase + HISI_PTT_TRACE_CTRL); + val &= ~HISI_PTT_TRACE_CTRL_RST; + writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL); + + /* Reset the index of current buffer */ + hisi_ptt->trace_ctrl.buf_index = 0; + + /* Zero the trace buffers */ + for (i = 0; i < HISI_PTT_TRACE_BUF_CNT; i++) + memset(ctrl->trace_buf[i].addr, 0, HISI_PTT_TRACE_BUF_SIZE); + + /* Clear the interrupt status */ + writel(HISI_PTT_TRACE_INT_STAT_MASK, hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT); + writel(0, hisi_ptt->iobase + HISI_PTT_TRACE_INT_MASK); + + /* Set the trace control register */ + val = FIELD_PREP(HISI_PTT_TRACE_CTRL_TYPE_SEL, ctrl->type); + val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_RXTX_SEL, ctrl->direction); + val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_DATA_FORMAT, ctrl->format); + val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_TARGET_SEL, hisi_ptt->trace_ctrl.filter); + if (!hisi_ptt->trace_ctrl.is_port) + val |= HISI_PTT_TRACE_CTRL_FILTER_MODE; + + /* Start the Trace */ + val |= HISI_PTT_TRACE_CTRL_EN; + writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL); + + return 0; +} + +static int hisi_ptt_update_aux(struct hisi_ptt *hisi_ptt, int index, bool stop) +{ + struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl; + struct perf_output_handle *handle = &ctrl->handle; + struct perf_event *event = handle->event; + struct hisi_ptt_pmu_buf *buf; + size_t size; + void *addr; + + buf = perf_get_aux(handle); + if (!buf || !handle->size) + return -EINVAL; + + addr = ctrl->trace_buf[ctrl->buf_index].addr; + + /* + * If we're going to stop, read the size of already traced data from + * HISI_PTT_TRACE_WR_STS. Otherwise we're coming from the interrupt, + * the data size is always HISI_PTT_TRACE_BUF_SIZE. + */ + if (stop) { + u32 reg; + + reg = readl(hisi_ptt->iobase + HISI_PTT_TRACE_WR_STS); + size = FIELD_GET(HISI_PTT_TRACE_WR_STS_WRITE, reg); + } else { + size = HISI_PTT_TRACE_BUF_SIZE; + } + + memcpy(buf->base + buf->pos, addr, size); + buf->pos += size; + + /* + * Just commit the traced data if we're going to stop. Otherwise if the + * resident AUX buffer cannot contain the data of next trace buffer, + * apply a new one. + */ + if (stop) { + perf_aux_output_end(handle, buf->pos); + } else if (buf->length - buf->pos < HISI_PTT_TRACE_BUF_SIZE) { + perf_aux_output_end(handle, buf->pos); + + buf = perf_aux_output_begin(handle, event); + if (!buf) + return -EINVAL; + + buf->pos = handle->head % buf->length; + if (buf->length - buf->pos < HISI_PTT_TRACE_BUF_SIZE) { + perf_aux_output_end(handle, 0); + return -EINVAL; + } + } + + return 0; +} + +static irqreturn_t hisi_ptt_isr(int irq, void *context) +{ + struct hisi_ptt *hisi_ptt = context; + u32 status, buf_idx; + + status = readl(hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT); + if (!(status & HISI_PTT_TRACE_INT_STAT_MASK)) + return IRQ_NONE; + + buf_idx = ffs(status) - 1; + + /* Clear the interrupt status of buffer @buf_idx */ + writel(status, hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT); + + /* + * Update the AUX buffer and cache the current buffer index, + * as we need to know this and save the data when the trace + * is ended out of the interrupt handler. End the trace + * if the updating fails. + */ + if (hisi_ptt_update_aux(hisi_ptt, buf_idx, false)) + hisi_ptt_trace_end(hisi_ptt); + else + hisi_ptt->trace_ctrl.buf_index = (buf_idx + 1) % HISI_PTT_TRACE_BUF_CNT; + + return IRQ_HANDLED; +} + +static void hisi_ptt_irq_free_vectors(void *pdev) +{ + pci_free_irq_vectors(pdev); +} + +static int hisi_ptt_register_irq(struct hisi_ptt *hisi_ptt) +{ + struct pci_dev *pdev = hisi_ptt->pdev; + int ret; + + ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI); + if (ret < 0) { + pci_err(pdev, "failed to allocate irq vector, ret = %d\n", ret); + return ret; + } + + ret = devm_add_action_or_reset(&pdev->dev, hisi_ptt_irq_free_vectors, pdev); + if (ret < 0) + return ret; + + ret = devm_request_threaded_irq(&pdev->dev, + pci_irq_vector(pdev, HISI_PTT_TRACE_DMA_IRQ), + NULL, hisi_ptt_isr, 0, + DRV_NAME, hisi_ptt); + if (ret) { + pci_err(pdev, "failed to request irq %d, ret = %d\n", + pci_irq_vector(pdev, HISI_PTT_TRACE_DMA_IRQ), ret); + return ret; + } + + return 0; +} + +static int hisi_ptt_init_filters(struct pci_dev *pdev, void *data) +{ + struct hisi_ptt_filter_desc *filter; + struct hisi_ptt *hisi_ptt = data; + + /* + * We won't fail the probe if filter allocation failed here. The filters + * should be partial initialized and users would know which filter fails + * through the log. Other functions of PTT device are still available. + */ + filter = kzalloc(sizeof(*filter), GFP_KERNEL); + if (!filter) { + pci_err(hisi_ptt->pdev, "failed to add filter %s\n", pci_name(pdev)); + return -ENOMEM; + } + + filter->devid = PCI_DEVID(pdev->bus->number, pdev->devfn); + + if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT) { + filter->is_port = true; + list_add_tail(&filter->list, &hisi_ptt->port_filters); + + /* Update the available port mask */ + hisi_ptt->port_mask |= hisi_ptt_get_filter_val(filter->devid, true); + } else { + list_add_tail(&filter->list, &hisi_ptt->req_filters); + } + + return 0; +} + +static void hisi_ptt_release_filters(void *data) +{ + struct hisi_ptt_filter_desc *filter, *tmp; + struct hisi_ptt *hisi_ptt = data; + + list_for_each_entry_safe(filter, tmp, &hisi_ptt->req_filters, list) { + list_del(&filter->list); + kfree(filter); + } + + list_for_each_entry_safe(filter, tmp, &hisi_ptt->port_filters, list) { + list_del(&filter->list); + kfree(filter); + } +} + +static int hisi_ptt_config_trace_buf(struct hisi_ptt *hisi_ptt) +{ + struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl; + struct device *dev = &hisi_ptt->pdev->dev; + int i; + + ctrl->trace_buf = devm_kcalloc(dev, HISI_PTT_TRACE_BUF_CNT, + sizeof(*ctrl->trace_buf), GFP_KERNEL); + if (!ctrl->trace_buf) + return -ENOMEM; + + for (i = 0; i < HISI_PTT_TRACE_BUF_CNT; ++i) { + ctrl->trace_buf[i].addr = dmam_alloc_coherent(dev, HISI_PTT_TRACE_BUF_SIZE, + &ctrl->trace_buf[i].dma, + GFP_KERNEL); + if (!ctrl->trace_buf[i].addr) + return -ENOMEM; + } + + /* Configure the trace DMA buffer */ + for (i = 0; i < HISI_PTT_TRACE_BUF_CNT; i++) { + writel(lower_32_bits(ctrl->trace_buf[i].dma), + hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_BASE_LO_0 + + i * HISI_PTT_TRACE_ADDR_STRIDE); + writel(upper_32_bits(ctrl->trace_buf[i].dma), + hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_BASE_HI_0 + + i * HISI_PTT_TRACE_ADDR_STRIDE); + } + writel(HISI_PTT_TRACE_BUF_SIZE, hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_SIZE); + + return 0; +} + +static int hisi_ptt_init_ctrls(struct hisi_ptt *hisi_ptt) +{ + struct pci_dev *pdev = hisi_ptt->pdev; + struct pci_bus *bus; + int ret; + u32 reg; + + INIT_LIST_HEAD(&hisi_ptt->port_filters); + INIT_LIST_HEAD(&hisi_ptt->req_filters); + + ret = hisi_ptt_config_trace_buf(hisi_ptt); + if (ret) + return ret; + + /* + * The device range register provides the information about the root + * ports which the RCiEP can control and trace. The RCiEP and the root + * ports which it supports are on the same PCIe core, with same domain + * number but maybe different bus number. The device range register + * will tell us which root ports we can support, Bit[31:16] indicates + * the upper BDF numbers of the root port, while Bit[15:0] indicates + * the lower. + */ + reg = readl(hisi_ptt->iobase + HISI_PTT_DEVICE_RANGE); + hisi_ptt->upper_bdf = FIELD_GET(HISI_PTT_DEVICE_RANGE_UPPER, reg); + hisi_ptt->lower_bdf = FIELD_GET(HISI_PTT_DEVICE_RANGE_LOWER, reg); + + bus = pci_find_bus(pci_domain_nr(pdev->bus), PCI_BUS_NUM(hisi_ptt->upper_bdf)); + if (bus) + pci_walk_bus(bus, hisi_ptt_init_filters, hisi_ptt); + + ret = devm_add_action_or_reset(&pdev->dev, hisi_ptt_release_filters, hisi_ptt); + if (ret) + return ret; + + hisi_ptt->trace_ctrl.on_cpu = -1; + return 0; +} + +static ssize_t cpumask_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct hisi_ptt *hisi_ptt = to_hisi_ptt(dev_get_drvdata(dev)); + const cpumask_t *cpumask = cpumask_of_node(dev_to_node(&hisi_ptt->pdev->dev)); + + return cpumap_print_to_pagebuf(true, buf, cpumask); +} +static DEVICE_ATTR_RO(cpumask); + +static struct attribute *hisi_ptt_cpumask_attrs[] = { + &dev_attr_cpumask.attr, + NULL +}; + +static const struct attribute_group hisi_ptt_cpumask_attr_group = { + .attrs = hisi_ptt_cpumask_attrs, +}; + +/* + * Bit 19 indicates the filter type, 1 for Root Port filter and 0 for Requester + * filter. Bit[15:0] indicates the filter value, for Root Port filter it's + * a bit mask of desired ports and for Requester filter it's the Requester ID + * of the desired PCIe function. Bit[18:16] is reserved for extension. + * + * See hisi_ptt.rst documentation for detailed information. + */ +PMU_FORMAT_ATTR(filter, "config:0-19"); +PMU_FORMAT_ATTR(direction, "config:20-23"); +PMU_FORMAT_ATTR(type, "config:24-31"); +PMU_FORMAT_ATTR(format, "config:32-35"); + +static struct attribute *hisi_ptt_pmu_format_attrs[] = { + &format_attr_filter.attr, + &format_attr_direction.attr, + &format_attr_type.attr, + &format_attr_format.attr, + NULL +}; + +static struct attribute_group hisi_ptt_pmu_format_group = { + .name = "format", + .attrs = hisi_ptt_pmu_format_attrs, +}; + +static const struct attribute_group *hisi_ptt_pmu_groups[] = { + &hisi_ptt_cpumask_attr_group, + &hisi_ptt_pmu_format_group, + &hisi_ptt_tune_group, + NULL +}; + +static int hisi_ptt_trace_valid_direction(u32 val) +{ + /* + * The direction values have different effects according to the data + * format (specified in the parentheses). TLP set A/B means different + * set of TLP types. See hisi_ptt.rst documentation for more details. + */ + static const u32 hisi_ptt_trace_available_direction[] = { + 0, /* inbound(4DW) or reserved(8DW) */ + 1, /* outbound(4DW) */ + 2, /* {in, out}bound(4DW) or inbound(8DW), TLP set A */ + 3, /* {in, out}bound(4DW) or inbound(8DW), TLP set B */ + }; + int i; + + for (i = 0; i < ARRAY_SIZE(hisi_ptt_trace_available_direction); i++) { + if (val == hisi_ptt_trace_available_direction[i]) + return 0; + } + + return -EINVAL; +} + +static int hisi_ptt_trace_valid_type(u32 val) +{ + /* Different types can be set simultaneously */ + static const u32 hisi_ptt_trace_available_type[] = { + 1, /* posted_request */ + 2, /* non-posted_request */ + 4, /* completion */ + }; + int i; + + if (!val) + return -EINVAL; + + /* + * Walk the available list and clear the valid bits of + * the config. If there is any resident bit after the + * walk then the config is invalid. + */ + for (i = 0; i < ARRAY_SIZE(hisi_ptt_trace_available_type); i++) + val &= ~hisi_ptt_trace_available_type[i]; + + if (val) + return -EINVAL; + + return 0; +} + +static int hisi_ptt_trace_valid_format(u32 val) +{ + static const u32 hisi_ptt_trace_availble_format[] = { + 0, /* 4DW */ + 1, /* 8DW */ + }; + int i; + + for (i = 0; i < ARRAY_SIZE(hisi_ptt_trace_availble_format); i++) { + if (val == hisi_ptt_trace_availble_format[i]) + return 0; + } + + return -EINVAL; +} + +static int hisi_ptt_trace_valid_filter(struct hisi_ptt *hisi_ptt, u64 config) +{ + unsigned long val, port_mask = hisi_ptt->port_mask; + struct hisi_ptt_filter_desc *filter; + + hisi_ptt->trace_ctrl.is_port = FIELD_GET(HISI_PTT_PMU_FILTER_IS_PORT, config); + val = FIELD_GET(HISI_PTT_PMU_FILTER_VAL_MASK, config); + + /* + * Port filters are defined as bit mask. For port filters, check + * the bits in the @val are within the range of hisi_ptt->port_mask + * and whether it's empty or not, otherwise user has specified + * some unsupported root ports. + * + * For Requester ID filters, walk the available filter list to see + * whether we have one matched. + */ + if (!hisi_ptt->trace_ctrl.is_port) { + list_for_each_entry(filter, &hisi_ptt->req_filters, list) { + if (val == hisi_ptt_get_filter_val(filter->devid, filter->is_port)) + return 0; + } + } else if (bitmap_subset(&val, &port_mask, BITS_PER_LONG)) { + return 0; + } + + return -EINVAL; +} + +static void hisi_ptt_pmu_init_configs(struct hisi_ptt *hisi_ptt, struct perf_event *event) +{ + struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl; + u32 val; + + val = FIELD_GET(HISI_PTT_PMU_FILTER_VAL_MASK, event->attr.config); + hisi_ptt->trace_ctrl.filter = val; + + val = FIELD_GET(HISI_PTT_PMU_DIRECTION_MASK, event->attr.config); + ctrl->direction = val; + + val = FIELD_GET(HISI_PTT_PMU_TYPE_MASK, event->attr.config); + ctrl->type = val; + + val = FIELD_GET(HISI_PTT_PMU_FORMAT_MASK, event->attr.config); + ctrl->format = val; +} + +static int hisi_ptt_pmu_event_init(struct perf_event *event) +{ + struct hisi_ptt *hisi_ptt = to_hisi_ptt(event->pmu); + int ret; + u32 val; + + if (event->cpu < 0) { + dev_dbg(event->pmu->dev, "Per-task mode not supported\n"); + return -EOPNOTSUPP; + } + + if (event->attr.type != hisi_ptt->hisi_ptt_pmu.type) + return -ENOENT; + + ret = hisi_ptt_trace_valid_filter(hisi_ptt, event->attr.config); + if (ret < 0) + return ret; + + val = FIELD_GET(HISI_PTT_PMU_DIRECTION_MASK, event->attr.config); + ret = hisi_ptt_trace_valid_direction(val); + if (ret < 0) + return ret; + + val = FIELD_GET(HISI_PTT_PMU_TYPE_MASK, event->attr.config); + ret = hisi_ptt_trace_valid_type(val); + if (ret < 0) + return ret; + + val = FIELD_GET(HISI_PTT_PMU_FORMAT_MASK, event->attr.config); + return hisi_ptt_trace_valid_format(val); +} + +static void *hisi_ptt_pmu_setup_aux(struct perf_event *event, void **pages, + int nr_pages, bool overwrite) +{ + struct hisi_ptt_pmu_buf *buf; + struct page **pagelist; + int i; + + if (overwrite) { + dev_warn(event->pmu->dev, "Overwrite mode is not supported\n"); + return NULL; + } + + /* If the pages size less than buffers, we cannot start trace */ + if (nr_pages < HISI_PTT_TRACE_TOTAL_BUF_SIZE / PAGE_SIZE) + return NULL; + + buf = kzalloc(sizeof(*buf), GFP_KERNEL); + if (!buf) + return NULL; + + pagelist = kcalloc(nr_pages, sizeof(*pagelist), GFP_KERNEL); + if (!pagelist) + goto err; + + for (i = 0; i < nr_pages; i++) + pagelist[i] = virt_to_page(pages[i]); + + buf->base = vmap(pagelist, nr_pages, VM_MAP, PAGE_KERNEL); + if (!buf->base) { + kfree(pagelist); + goto err; + } + + buf->nr_pages = nr_pages; + buf->length = nr_pages * PAGE_SIZE; + buf->pos = 0; + + kfree(pagelist); + return buf; +err: + kfree(buf); + return NULL; +} + +static void hisi_ptt_pmu_free_aux(void *aux) +{ + struct hisi_ptt_pmu_buf *buf = aux; + + vunmap(buf->base); + kfree(buf); +} + +static void hisi_ptt_pmu_start(struct perf_event *event, int flags) +{ + struct hisi_ptt *hisi_ptt = to_hisi_ptt(event->pmu); + struct perf_output_handle *handle = &hisi_ptt->trace_ctrl.handle; + struct hw_perf_event *hwc = &event->hw; + struct device *dev = event->pmu->dev; + struct hisi_ptt_pmu_buf *buf; + int cpu = event->cpu; + int ret; + + hwc->state = 0; + + /* Serialize the perf process if user specified several CPUs */ + spin_lock(&hisi_ptt->pmu_lock); + if (hisi_ptt->trace_ctrl.started) { + dev_dbg(dev, "trace has already started\n"); + goto stop; + } + + /* + * Handle the interrupt on the same cpu which starts the trace to avoid + * context mismatch. Otherwise we'll trigger the WARN from the perf + * core in event_function_local(). If CPU passed is offline we'll fail + * here, just log it since we can do nothing here. + */ + ret = irq_set_affinity(pci_irq_vector(hisi_ptt->pdev, HISI_PTT_TRACE_DMA_IRQ), + cpumask_of(cpu)); + if (ret) + dev_warn(dev, "failed to set the affinity of trace interrupt\n"); + + hisi_ptt->trace_ctrl.on_cpu = cpu; + + buf = perf_aux_output_begin(handle, event); + if (!buf) { + dev_dbg(dev, "aux output begin failed\n"); + goto stop; + } + + buf->pos = handle->head % buf->length; + + hisi_ptt_pmu_init_configs(hisi_ptt, event); + + ret = hisi_ptt_trace_start(hisi_ptt); + if (ret) { + dev_dbg(dev, "trace start failed, ret = %d\n", ret); + perf_aux_output_end(handle, 0); + goto stop; + } + + spin_unlock(&hisi_ptt->pmu_lock); + return; +stop: + event->hw.state |= PERF_HES_STOPPED; + spin_unlock(&hisi_ptt->pmu_lock); +} + +static void hisi_ptt_pmu_stop(struct perf_event *event, int flags) +{ + struct hisi_ptt *hisi_ptt = to_hisi_ptt(event->pmu); + struct hw_perf_event *hwc = &event->hw; + + if (hwc->state & PERF_HES_STOPPED) + return; + + spin_lock(&hisi_ptt->pmu_lock); + if (hisi_ptt->trace_ctrl.started) { + hisi_ptt_trace_end(hisi_ptt); + + if (!hisi_ptt_wait_trace_hw_idle(hisi_ptt)) + dev_warn(event->pmu->dev, "Device is still busy\n"); + + hisi_ptt_update_aux(hisi_ptt, hisi_ptt->trace_ctrl.buf_index, true); + } + spin_unlock(&hisi_ptt->pmu_lock); + + hwc->state |= PERF_HES_STOPPED; + perf_event_update_userpage(event); + hwc->state |= PERF_HES_UPTODATE; +} + +static int hisi_ptt_pmu_add(struct perf_event *event, int flags) +{ + struct hisi_ptt *hisi_ptt = to_hisi_ptt(event->pmu); + struct hw_perf_event *hwc = &event->hw; + int cpu = event->cpu; + + /* Only allow the cpus on the device's node to add the event */ + if (!cpumask_test_cpu(cpu, cpumask_of_node(dev_to_node(&hisi_ptt->pdev->dev)))) + return 0; + + hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE; + + if (flags & PERF_EF_START) { + hisi_ptt_pmu_start(event, PERF_EF_RELOAD); + if (hwc->state & PERF_HES_STOPPED) + return -EINVAL; + } + + return 0; +} + +static void hisi_ptt_pmu_del(struct perf_event *event, int flags) +{ + hisi_ptt_pmu_stop(event, PERF_EF_UPDATE); +} + +static void hisi_ptt_remove_cpuhp_instance(void *hotplug_node) +{ + cpuhp_state_remove_instance_nocalls(hisi_ptt_pmu_online, hotplug_node); +} + +static void hisi_ptt_unregister_pmu(void *pmu) +{ + perf_pmu_unregister(pmu); +} + +static int hisi_ptt_register_pmu(struct hisi_ptt *hisi_ptt) +{ + u16 core_id, sicl_id; + char *pmu_name; + u32 reg; + int ret; + + ret = cpuhp_state_add_instance_nocalls(hisi_ptt_pmu_online, + &hisi_ptt->hotplug_node); + if (ret) + return ret; + + ret = devm_add_action_or_reset(&hisi_ptt->pdev->dev, + hisi_ptt_remove_cpuhp_instance, + &hisi_ptt->hotplug_node); + if (ret) + return ret; + + mutex_init(&hisi_ptt->tune_lock); + spin_lock_init(&hisi_ptt->pmu_lock); + + hisi_ptt->hisi_ptt_pmu = (struct pmu) { + .module = THIS_MODULE, + .capabilities = PERF_PMU_CAP_EXCLUSIVE | PERF_PMU_CAP_ITRACE, + .task_ctx_nr = perf_sw_context, + .attr_groups = hisi_ptt_pmu_groups, + .event_init = hisi_ptt_pmu_event_init, + .setup_aux = hisi_ptt_pmu_setup_aux, + .free_aux = hisi_ptt_pmu_free_aux, + .start = hisi_ptt_pmu_start, + .stop = hisi_ptt_pmu_stop, + .add = hisi_ptt_pmu_add, + .del = hisi_ptt_pmu_del, + }; + + reg = readl(hisi_ptt->iobase + HISI_PTT_LOCATION); + core_id = FIELD_GET(HISI_PTT_CORE_ID, reg); + sicl_id = FIELD_GET(HISI_PTT_SICL_ID, reg); + + pmu_name = devm_kasprintf(&hisi_ptt->pdev->dev, GFP_KERNEL, "hisi_ptt%u_%u", + sicl_id, core_id); + if (!pmu_name) + return -ENOMEM; + + ret = perf_pmu_register(&hisi_ptt->hisi_ptt_pmu, pmu_name, -1); + if (ret) + return ret; + + return devm_add_action_or_reset(&hisi_ptt->pdev->dev, + hisi_ptt_unregister_pmu, + &hisi_ptt->hisi_ptt_pmu); +} + +/* + * The DMA of PTT trace can only use direct mappings due to some + * hardware restriction. Check whether there is no IOMMU or the + * policy of the IOMMU domain is passthrough, otherwise the trace + * cannot work. + * + * The PTT device is supposed to behind an ARM SMMUv3, which + * should have passthrough the device by a quirk. + */ +static int hisi_ptt_check_iommu_mapping(struct pci_dev *pdev) +{ + struct iommu_domain *iommu_domain; + + iommu_domain = iommu_get_domain_for_dev(&pdev->dev); + if (!iommu_domain || iommu_domain->type == IOMMU_DOMAIN_IDENTITY) + return 0; + + return -EOPNOTSUPP; +} + +static int hisi_ptt_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct hisi_ptt *hisi_ptt; + int ret; + + ret = hisi_ptt_check_iommu_mapping(pdev); + if (ret) { + pci_err(pdev, "requires direct DMA mappings\n"); + return ret; + } + + hisi_ptt = devm_kzalloc(&pdev->dev, sizeof(*hisi_ptt), GFP_KERNEL); + if (!hisi_ptt) + return -ENOMEM; + + hisi_ptt->pdev = pdev; + pci_set_drvdata(pdev, hisi_ptt); + + ret = pcim_enable_device(pdev); + if (ret) { + pci_err(pdev, "failed to enable device, ret = %d\n", ret); + return ret; + } + + ret = pcim_iomap_regions(pdev, BIT(2), DRV_NAME); + if (ret) { + pci_err(pdev, "failed to remap io memory, ret = %d\n", ret); + return ret; + } + + hisi_ptt->iobase = pcim_iomap_table(pdev)[2]; + + ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); + if (ret) { + pci_err(pdev, "failed to set 64 bit dma mask, ret = %d\n", ret); + return ret; + } + + pci_set_master(pdev); + + ret = hisi_ptt_register_irq(hisi_ptt); + if (ret) + return ret; + + ret = hisi_ptt_init_ctrls(hisi_ptt); + if (ret) { + pci_err(pdev, "failed to init controls, ret = %d\n", ret); + return ret; + } + + ret = hisi_ptt_register_pmu(hisi_ptt); + if (ret) { + pci_err(pdev, "failed to register PMU device, ret = %d", ret); + return ret; + } + + return 0; +} + +static const struct pci_device_id hisi_ptt_id_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, 0xa12e) }, + { } +}; +MODULE_DEVICE_TABLE(pci, hisi_ptt_id_tbl); + +static struct pci_driver hisi_ptt_driver = { + .name = DRV_NAME, + .id_table = hisi_ptt_id_tbl, + .probe = hisi_ptt_probe, +}; + +static int hisi_ptt_cpu_teardown(unsigned int cpu, struct hlist_node *node) +{ + struct hisi_ptt *hisi_ptt; + struct device *dev; + int target, src; + + hisi_ptt = hlist_entry_safe(node, struct hisi_ptt, hotplug_node); + src = hisi_ptt->trace_ctrl.on_cpu; + dev = hisi_ptt->hisi_ptt_pmu.dev; + + if (!hisi_ptt->trace_ctrl.started || src != cpu) + return 0; + + target = cpumask_any_but(cpumask_of_node(dev_to_node(&hisi_ptt->pdev->dev)), cpu); + if (target >= nr_cpu_ids) { + dev_err(dev, "no available cpu for perf context migration\n"); + return 0; + } + + perf_pmu_migrate_context(&hisi_ptt->hisi_ptt_pmu, src, target); + + /* + * Also make sure the interrupt bind to the migrated CPU as well. Warn + * the user on failure here. + */ + if (irq_set_affinity(pci_irq_vector(hisi_ptt->pdev, HISI_PTT_TRACE_DMA_IRQ), + cpumask_of(target))) + dev_warn(dev, "failed to set the affinity of trace interrupt\n"); + + hisi_ptt->trace_ctrl.on_cpu = target; + return 0; +} + +static int __init hisi_ptt_init(void) +{ + int ret; + + ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN, DRV_NAME, NULL, + hisi_ptt_cpu_teardown); + if (ret < 0) + return ret; + hisi_ptt_pmu_online = ret; + + ret = pci_register_driver(&hisi_ptt_driver); + if (ret) + cpuhp_remove_multi_state(hisi_ptt_pmu_online); + + return ret; +} +module_init(hisi_ptt_init); + +static void __exit hisi_ptt_exit(void) +{ + pci_unregister_driver(&hisi_ptt_driver); + cpuhp_remove_multi_state(hisi_ptt_pmu_online); +} +module_exit(hisi_ptt_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Yicong Yang <yangyicong@hisilicon.com>"); +MODULE_DESCRIPTION("Driver for HiSilicon PCIe tune and trace device"); diff --git a/drivers/hwtracing/ptt/hisi_ptt.h b/drivers/hwtracing/ptt/hisi_ptt.h new file mode 100644 index 000000000000..5beb1648c93a --- /dev/null +++ b/drivers/hwtracing/ptt/hisi_ptt.h @@ -0,0 +1,200 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Driver for HiSilicon PCIe tune and trace device + * + * Copyright (c) 2022 HiSilicon Technologies Co., Ltd. + * Author: Yicong Yang <yangyicong@hisilicon.com> + */ + +#ifndef _HISI_PTT_H +#define _HISI_PTT_H + +#include <linux/bits.h> +#include <linux/cpumask.h> +#include <linux/list.h> +#include <linux/mutex.h> +#include <linux/pci.h> +#include <linux/perf_event.h> +#include <linux/spinlock.h> +#include <linux/types.h> + +#define DRV_NAME "hisi_ptt" + +/* + * The definition of the device registers and register fields. + */ +#define HISI_PTT_TUNING_CTRL 0x0000 +#define HISI_PTT_TUNING_CTRL_CODE GENMASK(15, 0) +#define HISI_PTT_TUNING_CTRL_SUB GENMASK(23, 16) +#define HISI_PTT_TUNING_DATA 0x0004 +#define HISI_PTT_TUNING_DATA_VAL_MASK GENMASK(15, 0) +#define HISI_PTT_TRACE_ADDR_SIZE 0x0800 +#define HISI_PTT_TRACE_ADDR_BASE_LO_0 0x0810 +#define HISI_PTT_TRACE_ADDR_BASE_HI_0 0x0814 +#define HISI_PTT_TRACE_ADDR_STRIDE 0x8 +#define HISI_PTT_TRACE_CTRL 0x0850 +#define HISI_PTT_TRACE_CTRL_EN BIT(0) +#define HISI_PTT_TRACE_CTRL_RST BIT(1) +#define HISI_PTT_TRACE_CTRL_RXTX_SEL GENMASK(3, 2) +#define HISI_PTT_TRACE_CTRL_TYPE_SEL GENMASK(7, 4) +#define HISI_PTT_TRACE_CTRL_DATA_FORMAT BIT(14) +#define HISI_PTT_TRACE_CTRL_FILTER_MODE BIT(15) +#define HISI_PTT_TRACE_CTRL_TARGET_SEL GENMASK(31, 16) +#define HISI_PTT_TRACE_INT_STAT 0x0890 +#define HISI_PTT_TRACE_INT_STAT_MASK GENMASK(3, 0) +#define HISI_PTT_TRACE_INT_MASK 0x0894 +#define HISI_PTT_TUNING_INT_STAT 0x0898 +#define HISI_PTT_TUNING_INT_STAT_MASK BIT(0) +#define HISI_PTT_TRACE_WR_STS 0x08a0 +#define HISI_PTT_TRACE_WR_STS_WRITE GENMASK(27, 0) +#define HISI_PTT_TRACE_WR_STS_BUFFER GENMASK(29, 28) +#define HISI_PTT_TRACE_STS 0x08b0 +#define HISI_PTT_TRACE_IDLE BIT(0) +#define HISI_PTT_DEVICE_RANGE 0x0fe0 +#define HISI_PTT_DEVICE_RANGE_UPPER GENMASK(31, 16) +#define HISI_PTT_DEVICE_RANGE_LOWER GENMASK(15, 0) +#define HISI_PTT_LOCATION 0x0fe8 +#define HISI_PTT_CORE_ID GENMASK(15, 0) +#define HISI_PTT_SICL_ID GENMASK(31, 16) + +/* Parameters of PTT trace DMA part. */ +#define HISI_PTT_TRACE_DMA_IRQ 0 +#define HISI_PTT_TRACE_BUF_CNT 4 +#define HISI_PTT_TRACE_BUF_SIZE SZ_4M +#define HISI_PTT_TRACE_TOTAL_BUF_SIZE (HISI_PTT_TRACE_BUF_SIZE * \ + HISI_PTT_TRACE_BUF_CNT) +/* Wait time for hardware DMA to reset */ +#define HISI_PTT_RESET_TIMEOUT_US 10UL +#define HISI_PTT_RESET_POLL_INTERVAL_US 1UL +/* Poll timeout and interval for waiting hardware work to finish */ +#define HISI_PTT_WAIT_TUNE_TIMEOUT_US 1000000UL +#define HISI_PTT_WAIT_TRACE_TIMEOUT_US 100UL +#define HISI_PTT_WAIT_POLL_INTERVAL_US 10UL + +#define HISI_PCIE_CORE_PORT_ID(devfn) ((PCI_SLOT(devfn) & 0x7) << 1) + +/* Definition of the PMU configs */ +#define HISI_PTT_PMU_FILTER_IS_PORT BIT(19) +#define HISI_PTT_PMU_FILTER_VAL_MASK GENMASK(15, 0) +#define HISI_PTT_PMU_DIRECTION_MASK GENMASK(23, 20) +#define HISI_PTT_PMU_TYPE_MASK GENMASK(31, 24) +#define HISI_PTT_PMU_FORMAT_MASK GENMASK(35, 32) + +/** + * struct hisi_ptt_tune_desc - Describe tune event for PTT tune + * @hisi_ptt: PTT device this tune event belongs to + * @name: name of this event + * @event_code: code of the event + */ +struct hisi_ptt_tune_desc { + struct hisi_ptt *hisi_ptt; + const char *name; + u32 event_code; +}; + +/** + * struct hisi_ptt_dma_buffer - Describe a single trace buffer of PTT trace. + * The detail of the data format is described + * in the documentation of PTT device. + * @dma: DMA address of this buffer visible to the device + * @addr: virtual address of this buffer visible to the cpu + */ +struct hisi_ptt_dma_buffer { + dma_addr_t dma; + void *addr; +}; + +/** + * struct hisi_ptt_trace_ctrl - Control and status of PTT trace + * @trace_buf: array of the trace buffers for holding the trace data. + * the length will be HISI_PTT_TRACE_BUF_CNT. + * @handle: perf output handle of current trace session + * @buf_index: the index of current using trace buffer + * @on_cpu: current tracing cpu + * @started: current trace status, true for started + * @is_port: whether we're tracing root port or not + * @direction: direction of the TLP headers to trace + * @filter: filter value for tracing the TLP headers + * @format: format of the TLP headers to trace + * @type: type of the TLP headers to trace + */ +struct hisi_ptt_trace_ctrl { + struct hisi_ptt_dma_buffer *trace_buf; + struct perf_output_handle handle; + u32 buf_index; + int on_cpu; + bool started; + bool is_port; + u32 direction:2; + u32 filter:16; + u32 format:1; + u32 type:4; +}; + +/** + * struct hisi_ptt_filter_desc - Descriptor of the PTT trace filter + * @list: entry of this descriptor in the filter list + * @is_port: the PCI device of the filter is a Root Port or not + * @devid: the PCI device's devid of the filter + */ +struct hisi_ptt_filter_desc { + struct list_head list; + bool is_port; + u16 devid; +}; + +/** + * struct hisi_ptt_pmu_buf - Descriptor of the AUX buffer of PTT trace + * @length: size of the AUX buffer + * @nr_pages: number of pages of the AUX buffer + * @base: start address of AUX buffer + * @pos: position in the AUX buffer to commit traced data + */ +struct hisi_ptt_pmu_buf { + size_t length; + int nr_pages; + void *base; + long pos; +}; + +/** + * struct hisi_ptt - Per PTT device data + * @trace_ctrl: the control information of PTT trace + * @hotplug_node: node for register cpu hotplug event + * @hisi_ptt_pmu: the pum device of trace + * @iobase: base IO address of the device + * @pdev: pci_dev of this PTT device + * @tune_lock: lock to serialize the tune process + * @pmu_lock: lock to serialize the perf process + * @upper_bdf: the upper BDF range of the PCI devices managed by this PTT device + * @lower_bdf: the lower BDF range of the PCI devices managed by this PTT device + * @port_filters: the filter list of root ports + * @req_filters: the filter list of requester ID + * @port_mask: port mask of the managed root ports + */ +struct hisi_ptt { + struct hisi_ptt_trace_ctrl trace_ctrl; + struct hlist_node hotplug_node; + struct pmu hisi_ptt_pmu; + void __iomem *iobase; + struct pci_dev *pdev; + struct mutex tune_lock; + spinlock_t pmu_lock; + u32 upper_bdf; + u32 lower_bdf; + + /* + * The trace TLP headers can either be filtered by certain + * root port, or by the requester ID. Organize the filters + * by @port_filters and @req_filters here. The mask of all + * the valid ports is also cached for doing sanity check + * of user input. + */ + struct list_head port_filters; + struct list_head req_filters; + u16 port_mask; +}; + +#define to_hisi_ptt(pmu) container_of(pmu, struct hisi_ptt, hisi_ptt_pmu) + +#endif /* _HISI_PTT_H */ diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index 35798712f811..ffac66db7ac9 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -541,6 +541,19 @@ config MMA9553 To compile this driver as a module, choose M here: the module will be called mma9553. +config MSA311 + tristate "MEMSensing Digital 3-Axis Accelerometer Driver" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select REGMAP_I2C + help + Say yes here to build support for the MEMSensing MSA311 + accelerometer driver. + + To compile this driver as a module, choose M here: the module will be + called msa311. + config MXC4005 tristate "Memsic MXC4005XC 3-Axis Accelerometer Driver" depends on I2C diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile index 4d8792668838..5e45b5fa5ab5 100644 --- a/drivers/iio/accel/Makefile +++ b/drivers/iio/accel/Makefile @@ -58,6 +58,8 @@ obj-$(CONFIG_MMA9551_CORE) += mma9551_core.o obj-$(CONFIG_MMA9551) += mma9551.o obj-$(CONFIG_MMA9553) += mma9553.o +obj-$(CONFIG_MSA311) += msa311.o + obj-$(CONFIG_MXC4005) += mxc4005.o obj-$(CONFIG_MXC6255) += mxc6255.o diff --git a/drivers/iio/accel/adxl313.h b/drivers/iio/accel/adxl313.h index 4415f2fc07e1..72f624af4686 100644 --- a/drivers/iio/accel/adxl313.h +++ b/drivers/iio/accel/adxl313.h @@ -8,6 +8,8 @@ #ifndef _ADXL313_H_ #define _ADXL313_H_ +#include <linux/iio/iio.h> + /* ADXL313 register definitions */ #define ADXL313_REG_DEVID0 0x00 #define ADXL313_REG_DEVID1 0x01 @@ -26,6 +28,7 @@ #define ADXL313_REG_FIFO_STATUS 0x39 #define ADXL313_DEVID0 0xAD +#define ADXL313_DEVID0_ADXL312_314 0xE5 #define ADXL313_DEVID1 0x1D #define ADXL313_PARTID 0xCB #define ADXL313_SOFT_RESET 0x52 @@ -37,18 +40,46 @@ #define ADXL313_MEASUREMENT_MODE BIT(3) #define ADXL313_RANGE_MSK GENMASK(1, 0) -#define ADXL313_RANGE_4G 3 +#define ADXL313_RANGE_MAX 3 #define ADXL313_FULL_RES BIT(3) #define ADXL313_SPI_3WIRE BIT(6) #define ADXL313_I2C_DISABLE BIT(6) +extern const struct regmap_access_table adxl312_readable_regs_table; extern const struct regmap_access_table adxl313_readable_regs_table; +extern const struct regmap_access_table adxl314_readable_regs_table; +extern const struct regmap_access_table adxl312_writable_regs_table; extern const struct regmap_access_table adxl313_writable_regs_table; +extern const struct regmap_access_table adxl314_writable_regs_table; + +enum adxl313_device_type { + ADXL312, + ADXL313, + ADXL314, +}; + +struct adxl313_data { + struct regmap *regmap; + const struct adxl313_chip_info *chip_info; + struct mutex lock; /* lock to protect transf_buf */ + __le16 transf_buf __aligned(IIO_DMA_MINALIGN); +}; + +struct adxl313_chip_info { + const char *name; + enum adxl313_device_type type; + int scale_factor; + bool variable_range; + bool soft_reset; + int (*check_id)(struct device *dev, struct adxl313_data *data); +}; + +extern const struct adxl313_chip_info adxl31x_chip_info[]; int adxl313_core_probe(struct device *dev, struct regmap *regmap, - const char *name, + const struct adxl313_chip_info *chip_info, int (*setup)(struct device *, struct regmap *)); #endif /* _ADXL313_H_ */ diff --git a/drivers/iio/accel/adxl313_core.c b/drivers/iio/accel/adxl313_core.c index afeef779e1d0..4de0a41bd679 100644 --- a/drivers/iio/accel/adxl313_core.c +++ b/drivers/iio/accel/adxl313_core.c @@ -8,12 +8,18 @@ */ #include <linux/bitfield.h> -#include <linux/iio/iio.h> #include <linux/module.h> #include <linux/regmap.h> #include "adxl313.h" +static const struct regmap_range adxl312_readable_reg_range[] = { + regmap_reg_range(ADXL313_REG_DEVID0, ADXL313_REG_DEVID0), + regmap_reg_range(ADXL313_REG_OFS_AXIS(0), ADXL313_REG_OFS_AXIS(2)), + regmap_reg_range(ADXL313_REG_THRESH_ACT, ADXL313_REG_ACT_INACT_CTL), + regmap_reg_range(ADXL313_REG_BW_RATE, ADXL313_REG_FIFO_STATUS), +}; + static const struct regmap_range adxl313_readable_reg_range[] = { regmap_reg_range(ADXL313_REG_DEVID0, ADXL313_REG_XID), regmap_reg_range(ADXL313_REG_SOFT_RESET, ADXL313_REG_SOFT_RESET), @@ -22,12 +28,109 @@ static const struct regmap_range adxl313_readable_reg_range[] = { regmap_reg_range(ADXL313_REG_BW_RATE, ADXL313_REG_FIFO_STATUS), }; +const struct regmap_access_table adxl312_readable_regs_table = { + .yes_ranges = adxl312_readable_reg_range, + .n_yes_ranges = ARRAY_SIZE(adxl312_readable_reg_range), +}; +EXPORT_SYMBOL_NS_GPL(adxl312_readable_regs_table, IIO_ADXL313); + const struct regmap_access_table adxl313_readable_regs_table = { .yes_ranges = adxl313_readable_reg_range, .n_yes_ranges = ARRAY_SIZE(adxl313_readable_reg_range), }; EXPORT_SYMBOL_NS_GPL(adxl313_readable_regs_table, IIO_ADXL313); +const struct regmap_access_table adxl314_readable_regs_table = { + .yes_ranges = adxl312_readable_reg_range, + .n_yes_ranges = ARRAY_SIZE(adxl312_readable_reg_range), +}; +EXPORT_SYMBOL_NS_GPL(adxl314_readable_regs_table, IIO_ADXL313); + +static int adxl312_check_id(struct device *dev, + struct adxl313_data *data) +{ + unsigned int regval; + int ret; + + ret = regmap_read(data->regmap, ADXL313_REG_DEVID0, ®val); + if (ret) + return ret; + + if (regval != ADXL313_DEVID0_ADXL312_314) + dev_warn(dev, "Invalid manufacturer ID: %#02x\n", regval); + + return 0; +} + +static int adxl313_check_id(struct device *dev, + struct adxl313_data *data) +{ + unsigned int regval; + int ret; + + ret = regmap_read(data->regmap, ADXL313_REG_DEVID0, ®val); + if (ret) + return ret; + + if (regval != ADXL313_DEVID0) + dev_warn(dev, "Invalid manufacturer ID: 0x%02x\n", regval); + + /* Check DEVID1 and PARTID */ + if (regval == ADXL313_DEVID0) { + ret = regmap_read(data->regmap, ADXL313_REG_DEVID1, ®val); + if (ret) + return ret; + + if (regval != ADXL313_DEVID1) + dev_warn(dev, "Invalid mems ID: 0x%02x\n", regval); + + ret = regmap_read(data->regmap, ADXL313_REG_PARTID, ®val); + if (ret) + return ret; + + if (regval != ADXL313_PARTID) + dev_warn(dev, "Invalid device ID: 0x%02x\n", regval); + } + + return 0; +} + +const struct adxl313_chip_info adxl31x_chip_info[] = { + [ADXL312] = { + .name = "adxl312", + .type = ADXL312, + .scale_factor = 28425072, + .variable_range = true, + .soft_reset = false, + .check_id = &adxl312_check_id, + }, + [ADXL313] = { + .name = "adxl313", + .type = ADXL313, + .scale_factor = 9576806, + .variable_range = true, + .soft_reset = true, + .check_id = &adxl313_check_id, + }, + [ADXL314] = { + .name = "adxl314", + .type = ADXL314, + .scale_factor = 478858719, + .variable_range = false, + .soft_reset = false, + .check_id = &adxl312_check_id, + }, +}; +EXPORT_SYMBOL_NS_GPL(adxl31x_chip_info, IIO_ADXL313); + +static const struct regmap_range adxl312_writable_reg_range[] = { + regmap_reg_range(ADXL313_REG_OFS_AXIS(0), ADXL313_REG_OFS_AXIS(2)), + regmap_reg_range(ADXL313_REG_THRESH_ACT, ADXL313_REG_ACT_INACT_CTL), + regmap_reg_range(ADXL313_REG_BW_RATE, ADXL313_REG_INT_MAP), + regmap_reg_range(ADXL313_REG_DATA_FORMAT, ADXL313_REG_DATA_FORMAT), + regmap_reg_range(ADXL313_REG_FIFO_CTL, ADXL313_REG_FIFO_CTL), +}; + static const struct regmap_range adxl313_writable_reg_range[] = { regmap_reg_range(ADXL313_REG_SOFT_RESET, ADXL313_REG_SOFT_RESET), regmap_reg_range(ADXL313_REG_OFS_AXIS(0), ADXL313_REG_OFS_AXIS(2)), @@ -37,17 +140,23 @@ static const struct regmap_range adxl313_writable_reg_range[] = { regmap_reg_range(ADXL313_REG_FIFO_CTL, ADXL313_REG_FIFO_CTL), }; +const struct regmap_access_table adxl312_writable_regs_table = { + .yes_ranges = adxl312_writable_reg_range, + .n_yes_ranges = ARRAY_SIZE(adxl312_writable_reg_range), +}; +EXPORT_SYMBOL_NS_GPL(adxl312_writable_regs_table, IIO_ADXL313); + const struct regmap_access_table adxl313_writable_regs_table = { .yes_ranges = adxl313_writable_reg_range, .n_yes_ranges = ARRAY_SIZE(adxl313_writable_reg_range), }; EXPORT_SYMBOL_NS_GPL(adxl313_writable_regs_table, IIO_ADXL313); -struct adxl313_data { - struct regmap *regmap; - struct mutex lock; /* lock to protect transf_buf */ - __le16 transf_buf __aligned(IIO_DMA_MINALIGN); +const struct regmap_access_table adxl314_writable_regs_table = { + .yes_ranges = adxl312_writable_reg_range, + .n_yes_ranges = ARRAY_SIZE(adxl312_writable_reg_range), }; +EXPORT_SYMBOL_NS_GPL(adxl314_writable_regs_table, IIO_ADXL313); static const int adxl313_odr_freqs[][2] = { [0] = { 6, 250000 }, @@ -156,12 +265,10 @@ static int adxl313_read_raw(struct iio_dev *indio_dev, *val = sign_extend32(ret, chan->scan_type.realbits - 1); return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: - /* - * Scale for any g range is given in datasheet as - * 1024 LSB/g = 0.0009765625 * 9.80665 = 0.009576806640625 m/s^2 - */ *val = 0; - *val2 = 9576806; + + *val2 = data->chip_info->scale_factor; + return IIO_VAL_INT_PLUS_NANO; case IIO_CHAN_INFO_CALIBBIAS: ret = regmap_read(data->regmap, @@ -170,7 +277,7 @@ static int adxl313_read_raw(struct iio_dev *indio_dev, return ret; /* - * 8-bit resolution at +/- 0.5g, that is 4x accel data scale + * 8-bit resolution at minimum range, that is 4x accel data scale * factor at full resolution */ *val = sign_extend32(regval, 7) * 4; @@ -198,7 +305,7 @@ static int adxl313_write_raw(struct iio_dev *indio_dev, switch (mask) { case IIO_CHAN_INFO_CALIBBIAS: /* - * 8-bit resolution at +/- 0.5g, that is 4x accel data scale + * 8-bit resolution at minimum range, that is 4x accel data scale * factor at full resolution */ if (clamp_val(val, -128 * 4, 127 * 4) != val) @@ -223,14 +330,18 @@ static const struct iio_info adxl313_info = { static int adxl313_setup(struct device *dev, struct adxl313_data *data, int (*setup)(struct device *, struct regmap *)) { - unsigned int regval; int ret; - /* Ensures the device is in a consistent state after start up */ - ret = regmap_write(data->regmap, ADXL313_REG_SOFT_RESET, - ADXL313_SOFT_RESET); - if (ret) - return ret; + /* + * If sw reset available, ensures the device is in a consistent + * state after start up + */ + if (data->chip_info->soft_reset) { + ret = regmap_write(data->regmap, ADXL313_REG_SOFT_RESET, + ADXL313_SOFT_RESET); + if (ret) + return ret; + } if (setup) { ret = setup(dev, data->regmap); @@ -238,46 +349,25 @@ static int adxl313_setup(struct device *dev, struct adxl313_data *data, return ret; } - ret = regmap_read(data->regmap, ADXL313_REG_DEVID0, ®val); + ret = data->chip_info->check_id(dev, data); if (ret) return ret; - if (regval != ADXL313_DEVID0) { - dev_err(dev, "Invalid manufacturer ID: 0x%02x\n", regval); - return -ENODEV; - } - - ret = regmap_read(data->regmap, ADXL313_REG_DEVID1, ®val); - if (ret) - return ret; - - if (regval != ADXL313_DEVID1) { - dev_err(dev, "Invalid mems ID: 0x%02x\n", regval); - return -ENODEV; - } - - ret = regmap_read(data->regmap, ADXL313_REG_PARTID, ®val); - if (ret) - return ret; + /* Sets the range to maximum, full resolution, if applicable */ + if (data->chip_info->variable_range) { + ret = regmap_update_bits(data->regmap, ADXL313_REG_DATA_FORMAT, + ADXL313_RANGE_MSK, + FIELD_PREP(ADXL313_RANGE_MSK, ADXL313_RANGE_MAX)); + if (ret) + return ret; - if (regval != ADXL313_PARTID) { - dev_err(dev, "Invalid device ID: 0x%02x\n", regval); - return -ENODEV; + /* Enables full resolution */ + ret = regmap_update_bits(data->regmap, ADXL313_REG_DATA_FORMAT, + ADXL313_FULL_RES, ADXL313_FULL_RES); + if (ret) + return ret; } - /* Sets the range to +/- 4g */ - ret = regmap_update_bits(data->regmap, ADXL313_REG_DATA_FORMAT, - ADXL313_RANGE_MSK, - FIELD_PREP(ADXL313_RANGE_MSK, ADXL313_RANGE_4G)); - if (ret) - return ret; - - /* Enables full resolution */ - ret = regmap_update_bits(data->regmap, ADXL313_REG_DATA_FORMAT, - ADXL313_FULL_RES, ADXL313_FULL_RES); - if (ret) - return ret; - /* Enables measurement mode */ return regmap_update_bits(data->regmap, ADXL313_REG_POWER_CTL, ADXL313_POWER_CTL_MSK, @@ -288,7 +378,7 @@ static int adxl313_setup(struct device *dev, struct adxl313_data *data, * adxl313_core_probe() - probe and setup for adxl313 accelerometer * @dev: Driver model representation of the device * @regmap: Register map of the device - * @name: Device name buffer reference + * @chip_info: Structure containing device specific data * @setup: Setup routine to be executed right before the standard device * setup, can also be set to NULL if not required * @@ -296,7 +386,7 @@ static int adxl313_setup(struct device *dev, struct adxl313_data *data, */ int adxl313_core_probe(struct device *dev, struct regmap *regmap, - const char *name, + const struct adxl313_chip_info *chip_info, int (*setup)(struct device *, struct regmap *)) { struct adxl313_data *data; @@ -309,9 +399,11 @@ int adxl313_core_probe(struct device *dev, data = iio_priv(indio_dev); data->regmap = regmap; + data->chip_info = chip_info; + mutex_init(&data->lock); - indio_dev->name = name; + indio_dev->name = chip_info->name; indio_dev->info = &adxl313_info; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->channels = adxl313_channels; diff --git a/drivers/iio/accel/adxl313_i2c.c b/drivers/iio/accel/adxl313_i2c.c index c329765dbf60..99cc7fc29488 100644 --- a/drivers/iio/accel/adxl313_i2c.c +++ b/drivers/iio/accel/adxl313_i2c.c @@ -14,42 +14,72 @@ #include "adxl313.h" -static const struct regmap_config adxl313_i2c_regmap_config = { - .reg_bits = 8, - .val_bits = 8, - .rd_table = &adxl313_readable_regs_table, - .wr_table = &adxl313_writable_regs_table, - .max_register = 0x39, +static const struct regmap_config adxl31x_i2c_regmap_config[] = { + [ADXL312] = { + .reg_bits = 8, + .val_bits = 8, + .rd_table = &adxl312_readable_regs_table, + .wr_table = &adxl312_writable_regs_table, + .max_register = 0x39, + }, + [ADXL313] = { + .reg_bits = 8, + .val_bits = 8, + .rd_table = &adxl313_readable_regs_table, + .wr_table = &adxl313_writable_regs_table, + .max_register = 0x39, + }, + [ADXL314] = { + .reg_bits = 8, + .val_bits = 8, + .rd_table = &adxl314_readable_regs_table, + .wr_table = &adxl314_writable_regs_table, + .max_register = 0x39, + }, }; -static int adxl313_i2c_probe(struct i2c_client *client) -{ - struct regmap *regmap; - - regmap = devm_regmap_init_i2c(client, &adxl313_i2c_regmap_config); - if (IS_ERR(regmap)) { - dev_err(&client->dev, "Error initializing i2c regmap: %ld\n", - PTR_ERR(regmap)); - return PTR_ERR(regmap); - } - - return adxl313_core_probe(&client->dev, regmap, client->name, NULL); -} - static const struct i2c_device_id adxl313_i2c_id[] = { - { "adxl313" }, + { .name = "adxl312", .driver_data = (kernel_ulong_t)&adxl31x_chip_info[ADXL312] }, + { .name = "adxl313", .driver_data = (kernel_ulong_t)&adxl31x_chip_info[ADXL312] }, + { .name = "adxl314", .driver_data = (kernel_ulong_t)&adxl31x_chip_info[ADXL312] }, { } }; MODULE_DEVICE_TABLE(i2c, adxl313_i2c_id); static const struct of_device_id adxl313_of_match[] = { - { .compatible = "adi,adxl313" }, + { .compatible = "adi,adxl312", .data = &adxl31x_chip_info[ADXL312] }, + { .compatible = "adi,adxl313", .data = &adxl31x_chip_info[ADXL313] }, + { .compatible = "adi,adxl314", .data = &adxl31x_chip_info[ADXL314] }, { } }; MODULE_DEVICE_TABLE(of, adxl313_of_match); +static int adxl313_i2c_probe(struct i2c_client *client) +{ + const struct adxl313_chip_info *chip_data; + struct regmap *regmap; + + /* + * Retrieves device specific data as a pointer to a + * adxl313_chip_info structure + */ + chip_data = device_get_match_data(&client->dev); + if (!chip_data) + chip_data = (const struct adxl313_chip_info *)i2c_match_id(adxl313_i2c_id, client)->driver_data; + + regmap = devm_regmap_init_i2c(client, + &adxl31x_i2c_regmap_config[chip_data->type]); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "Error initializing i2c regmap: %ld\n", + PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + + return adxl313_core_probe(&client->dev, regmap, chip_data, NULL); +} + static struct i2c_driver adxl313_i2c_driver = { .driver = { .name = "adxl313_i2c", diff --git a/drivers/iio/accel/adxl313_spi.c b/drivers/iio/accel/adxl313_spi.c index a3c6d553462d..b7cc15678a2b 100644 --- a/drivers/iio/accel/adxl313_spi.c +++ b/drivers/iio/accel/adxl313_spi.c @@ -11,17 +11,38 @@ #include <linux/module.h> #include <linux/regmap.h> #include <linux/spi/spi.h> +#include <linux/property.h> #include "adxl313.h" -static const struct regmap_config adxl313_spi_regmap_config = { - .reg_bits = 8, - .val_bits = 8, - .rd_table = &adxl313_readable_regs_table, - .wr_table = &adxl313_writable_regs_table, - .max_register = 0x39, - /* Setting bits 7 and 6 enables multiple-byte read */ - .read_flag_mask = BIT(7) | BIT(6), +static const struct regmap_config adxl31x_spi_regmap_config[] = { + [ADXL312] = { + .reg_bits = 8, + .val_bits = 8, + .rd_table = &adxl312_readable_regs_table, + .wr_table = &adxl312_writable_regs_table, + .max_register = 0x39, + /* Setting bits 7 and 6 enables multiple-byte read */ + .read_flag_mask = BIT(7) | BIT(6), + }, + [ADXL313] = { + .reg_bits = 8, + .val_bits = 8, + .rd_table = &adxl313_readable_regs_table, + .wr_table = &adxl313_writable_regs_table, + .max_register = 0x39, + /* Setting bits 7 and 6 enables multiple-byte read */ + .read_flag_mask = BIT(7) | BIT(6), + }, + [ADXL314] = { + .reg_bits = 8, + .val_bits = 8, + .rd_table = &adxl314_readable_regs_table, + .wr_table = &adxl314_writable_regs_table, + .max_register = 0x39, + /* Setting bits 7 and 6 enables multiple-byte read */ + .read_flag_mask = BIT(7) | BIT(6), + }, }; static int adxl313_spi_setup(struct device *dev, struct regmap *regmap) @@ -42,7 +63,7 @@ static int adxl313_spi_setup(struct device *dev, struct regmap *regmap) static int adxl313_spi_probe(struct spi_device *spi) { - const struct spi_device_id *id = spi_get_device_id(spi); + const struct adxl313_chip_info *chip_data; struct regmap *regmap; int ret; @@ -51,26 +72,40 @@ static int adxl313_spi_probe(struct spi_device *spi) if (ret) return ret; - regmap = devm_regmap_init_spi(spi, &adxl313_spi_regmap_config); + /* + * Retrieves device specific data as a pointer to a + * adxl313_chip_info structure + */ + chip_data = device_get_match_data(&spi->dev); + if (!chip_data) + chip_data = (const struct adxl313_chip_info *)spi_get_device_id(spi)->driver_data; + + regmap = devm_regmap_init_spi(spi, + &adxl31x_spi_regmap_config[chip_data->type]); + if (IS_ERR(regmap)) { dev_err(&spi->dev, "Error initializing spi regmap: %ld\n", PTR_ERR(regmap)); return PTR_ERR(regmap); } - return adxl313_core_probe(&spi->dev, regmap, id->name, - &adxl313_spi_setup); + return adxl313_core_probe(&spi->dev, regmap, + chip_data, &adxl313_spi_setup); } static const struct spi_device_id adxl313_spi_id[] = { - { "adxl313" }, + { .name = "adxl312", .driver_data = (kernel_ulong_t)&adxl31x_chip_info[ADXL312] }, + { .name = "adxl313", .driver_data = (kernel_ulong_t)&adxl31x_chip_info[ADXL313] }, + { .name = "adxl314", .driver_data = (kernel_ulong_t)&adxl31x_chip_info[ADXL314] }, { } }; MODULE_DEVICE_TABLE(spi, adxl313_spi_id); static const struct of_device_id adxl313_of_match[] = { - { .compatible = "adi,adxl313" }, + { .compatible = "adi,adxl312", .data = &adxl31x_chip_info[ADXL312] }, + { .compatible = "adi,adxl313", .data = &adxl31x_chip_info[ADXL313] }, + { .compatible = "adi,adxl314", .data = &adxl31x_chip_info[ADXL314] }, { } }; diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c index 370bfec1275a..1919e0089c11 100644 --- a/drivers/iio/accel/adxl345_core.c +++ b/drivers/iio/accel/adxl345_core.c @@ -10,6 +10,7 @@ #include <linux/module.h> #include <linux/property.h> #include <linux/regmap.h> +#include <linux/units.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> @@ -32,7 +33,6 @@ #define ADXL345_BW_RATE GENMASK(3, 0) #define ADXL345_BASE_RATE_NANO_HZ 97656250LL -#define NHZ_PER_HZ 1000000000LL #define ADXL345_POWER_CTL_MEASURE BIT(3) #define ADXL345_POWER_CTL_STANDBY 0x00 @@ -139,7 +139,7 @@ static int adxl345_read_raw(struct iio_dev *indio_dev, samp_freq_nhz = ADXL345_BASE_RATE_NANO_HZ << (regval & ADXL345_BW_RATE); - *val = div_s64_rem(samp_freq_nhz, NHZ_PER_HZ, val2); + *val = div_s64_rem(samp_freq_nhz, NANOHZ_PER_HZ, val2); return IIO_VAL_INT_PLUS_NANO; } @@ -164,7 +164,8 @@ static int adxl345_write_raw(struct iio_dev *indio_dev, ADXL345_REG_OFS_AXIS(chan->address), val / 4); case IIO_CHAN_INFO_SAMP_FREQ: - n = div_s64(val * NHZ_PER_HZ + val2, ADXL345_BASE_RATE_NANO_HZ); + n = div_s64(val * NANOHZ_PER_HZ + val2, + ADXL345_BASE_RATE_NANO_HZ); return regmap_update_bits(data->regmap, ADXL345_REG_BW_RATE, ADXL345_BW_RATE, diff --git a/drivers/iio/accel/bma400.h b/drivers/iio/accel/bma400.h index e8f802a82300..36edbaff4f7f 100644 --- a/drivers/iio/accel/bma400.h +++ b/drivers/iio/accel/bma400.h @@ -40,6 +40,7 @@ #define BMA400_INT_STAT1_REG 0x0f #define BMA400_INT_STAT2_REG 0x10 #define BMA400_INT12_MAP_REG 0x23 +#define BMA400_INT_ENG_OVRUN_MSK BIT(4) /* Temperature register */ #define BMA400_TEMP_DATA_REG 0x11 @@ -105,6 +106,19 @@ #define BMA400_INT_GEN2_MSK BIT(3) #define BMA400_GEN_HYST_MSK GENMASK(1, 0) +/* TAP config registers */ +#define BMA400_TAP_CONFIG 0x57 +#define BMA400_TAP_CONFIG1 0x58 +#define BMA400_S_TAP_MSK BIT(2) +#define BMA400_D_TAP_MSK BIT(3) +#define BMA400_INT_S_TAP_MSK BIT(10) +#define BMA400_INT_D_TAP_MSK BIT(11) +#define BMA400_TAP_SEN_MSK GENMASK(2, 0) +#define BMA400_TAP_TICSTH_MSK GENMASK(1, 0) +#define BMA400_TAP_QUIET_MSK GENMASK(3, 2) +#define BMA400_TAP_QUIETDT_MSK GENMASK(5, 4) +#define BMA400_TAP_TIM_LIST_LEN 4 + /* * BMA400_SCALE_MIN macro value represents m/s^2 for 1 LSB before * converting to micro values for +-2g range. diff --git a/drivers/iio/accel/bma400_core.c b/drivers/iio/accel/bma400_core.c index c31bdd9b168e..ad8fce3e08cd 100644 --- a/drivers/iio/accel/bma400_core.c +++ b/drivers/iio/accel/bma400_core.c @@ -26,6 +26,7 @@ #include <linux/iio/iio.h> #include <linux/iio/buffer.h> #include <linux/iio/events.h> +#include <linux/iio/sysfs.h> #include <linux/iio/trigger.h> #include <linux/iio/trigger_consumer.h> #include <linux/iio/triggered_buffer.h> @@ -47,6 +48,27 @@ static int bma400_sample_freqs[14]; static const int bma400_osr_range[] = { 0, 1, 3 }; +static int tap_reset_timeout[BMA400_TAP_TIM_LIST_LEN] = { + 300000, + 400000, + 500000, + 600000 +}; + +static int tap_max2min_time[BMA400_TAP_TIM_LIST_LEN] = { + 30000, + 45000, + 60000, + 90000 +}; + +static int double_tap2_min_delay[BMA400_TAP_TIM_LIST_LEN] = { + 20000, + 40000, + 60000, + 80000 +}; + /* See the ACC_CONFIG0 section of the datasheet */ enum bma400_power_mode { POWER_MODE_SLEEP = 0x00, @@ -88,6 +110,7 @@ struct bma400_data { bool step_event_en; bool activity_event_en; unsigned int generic_event_en; + unsigned int tap_event_en_bitmask; /* Correct time stamp alignment */ struct { __le16 buff[3]; @@ -216,6 +239,115 @@ static const struct iio_event_spec bma400_accel_event[] = { BIT(IIO_EV_INFO_HYSTERESIS) | BIT(IIO_EV_INFO_ENABLE), }, + { + .type = IIO_EV_TYPE_GESTURE, + .dir = IIO_EV_DIR_SINGLETAP, + .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) | + BIT(IIO_EV_INFO_ENABLE) | + BIT(IIO_EV_INFO_RESET_TIMEOUT), + }, + { + .type = IIO_EV_TYPE_GESTURE, + .dir = IIO_EV_DIR_DOUBLETAP, + .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) | + BIT(IIO_EV_INFO_ENABLE) | + BIT(IIO_EV_INFO_RESET_TIMEOUT) | + BIT(IIO_EV_INFO_TAP2_MIN_DELAY), + }, +}; + +static int usec_to_tapreg_raw(int usec, const int *time_list) +{ + int index; + + for (index = 0; index < BMA400_TAP_TIM_LIST_LEN; index++) { + if (usec == time_list[index]) + return index; + } + return -EINVAL; +} + +static ssize_t in_accel_gesture_tap_maxtomin_time_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct bma400_data *data = iio_priv(indio_dev); + int ret, reg_val, raw, vals[2]; + + ret = regmap_read(data->regmap, BMA400_TAP_CONFIG1, ®_val); + if (ret) + return ret; + + raw = FIELD_GET(BMA400_TAP_TICSTH_MSK, reg_val); + vals[0] = 0; + vals[1] = tap_max2min_time[raw]; + + return iio_format_value(buf, IIO_VAL_INT_PLUS_MICRO, 2, vals); +} + +static ssize_t in_accel_gesture_tap_maxtomin_time_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct bma400_data *data = iio_priv(indio_dev); + int ret, val_int, val_fract, raw; + + ret = iio_str_to_fixpoint(buf, 100000, &val_int, &val_fract); + if (ret) + return ret; + + raw = usec_to_tapreg_raw(val_fract, tap_max2min_time); + if (raw < 0) + return -EINVAL; + + ret = regmap_update_bits(data->regmap, BMA400_TAP_CONFIG1, + BMA400_TAP_TICSTH_MSK, + FIELD_PREP(BMA400_TAP_TICSTH_MSK, raw)); + if (ret) + return ret; + + return len; +} + +static IIO_DEVICE_ATTR_RW(in_accel_gesture_tap_maxtomin_time, 0); + +/* + * Tap interrupts works with 200 Hz input data rate and the time based tap + * controls are in the terms of data samples so the below calculation is + * used to convert the configuration values into seconds. + * e.g.: + * 60 data samples * 0.005 ms = 0.3 seconds. + * 80 data samples * 0.005 ms = 0.4 seconds. + */ + +/* quiet configuration values in seconds */ +static IIO_CONST_ATTR(in_accel_gesture_tap_reset_timeout_available, + "0.3 0.4 0.5 0.6"); + +/* tics_th configuration values in seconds */ +static IIO_CONST_ATTR(in_accel_gesture_tap_maxtomin_time_available, + "0.03 0.045 0.06 0.09"); + +/* quiet_dt configuration values in seconds */ +static IIO_CONST_ATTR(in_accel_gesture_doubletap_tap2_min_delay_available, + "0.02 0.04 0.06 0.08"); + +/* List of sensitivity values available to configure tap interrupts */ +static IIO_CONST_ATTR(in_accel_gesture_tap_value_available, "0 1 2 3 4 5 6 7"); + +static struct attribute *bma400_event_attributes[] = { + &iio_const_attr_in_accel_gesture_tap_value_available.dev_attr.attr, + &iio_const_attr_in_accel_gesture_tap_reset_timeout_available.dev_attr.attr, + &iio_const_attr_in_accel_gesture_tap_maxtomin_time_available.dev_attr.attr, + &iio_const_attr_in_accel_gesture_doubletap_tap2_min_delay_available.dev_attr.attr, + &iio_dev_attr_in_accel_gesture_tap_maxtomin_time.dev_attr.attr, + NULL +}; + +static const struct attribute_group bma400_event_attribute_group = { + .attrs = bma400_event_attributes, }; #define BMA400_ACC_CHANNEL(_index, _axis) { \ @@ -1012,6 +1144,12 @@ static int bma400_read_event_config(struct iio_dev *indio_dev, case IIO_EV_DIR_FALLING: return FIELD_GET(BMA400_INT_GEN2_MSK, data->generic_event_en); + case IIO_EV_DIR_SINGLETAP: + return FIELD_GET(BMA400_S_TAP_MSK, + data->tap_event_en_bitmask); + case IIO_EV_DIR_DOUBLETAP: + return FIELD_GET(BMA400_D_TAP_MSK, + data->tap_event_en_bitmask); default: return -EINVAL; } @@ -1046,7 +1184,8 @@ static int bma400_activity_event_en(struct bma400_data *data, enum iio_event_direction dir, int state) { - int ret, reg, msk, value, field_value; + int ret, reg, msk, value; + int field_value = 0; switch (dir) { case IIO_EV_DIR_RISING: @@ -1101,6 +1240,80 @@ static int bma400_activity_event_en(struct bma400_data *data, return 0; } +static int bma400_tap_event_en(struct bma400_data *data, + enum iio_event_direction dir, int state) +{ + unsigned int mask, field_value; + int ret; + + /* + * Tap interrupts can be configured only in normal mode. + * See table in section 4.3 "Power modes - performance modes" of + * datasheet v1.2. + */ + if (data->power_mode != POWER_MODE_NORMAL) + return -EINVAL; + + /* + * Tap interrupts are operating with a data rate of 200Hz. + * See section 4.7 "Tap sensing interrupt" in datasheet v1.2. + */ + if (data->sample_freq.hz != 200 && state) { + dev_err(data->dev, "Invalid data rate for tap interrupts.\n"); + return -EINVAL; + } + + ret = regmap_update_bits(data->regmap, BMA400_INT12_MAP_REG, + BMA400_S_TAP_MSK, + FIELD_PREP(BMA400_S_TAP_MSK, state)); + if (ret) + return ret; + + switch (dir) { + case IIO_EV_DIR_SINGLETAP: + mask = BMA400_S_TAP_MSK; + set_mask_bits(&field_value, BMA400_S_TAP_MSK, + FIELD_PREP(BMA400_S_TAP_MSK, state)); + break; + case IIO_EV_DIR_DOUBLETAP: + mask = BMA400_D_TAP_MSK; + set_mask_bits(&field_value, BMA400_D_TAP_MSK, + FIELD_PREP(BMA400_D_TAP_MSK, state)); + break; + default: + return -EINVAL; + } + + ret = regmap_update_bits(data->regmap, BMA400_INT_CONFIG1_REG, mask, + field_value); + if (ret) + return ret; + + set_mask_bits(&data->tap_event_en_bitmask, mask, field_value); + + return 0; +} + +static int bma400_disable_adv_interrupt(struct bma400_data *data) +{ + int ret; + + ret = regmap_write(data->regmap, BMA400_INT_CONFIG0_REG, 0); + if (ret) + return ret; + + ret = regmap_write(data->regmap, BMA400_INT_CONFIG1_REG, 0); + if (ret) + return ret; + + data->tap_event_en_bitmask = 0; + data->generic_event_en = 0; + data->step_event_en = false; + data->activity_event_en = false; + + return 0; +} + static int bma400_write_event_config(struct iio_dev *indio_dev, const struct iio_chan_spec *chan, enum iio_event_type type, @@ -1111,10 +1324,20 @@ static int bma400_write_event_config(struct iio_dev *indio_dev, switch (chan->type) { case IIO_ACCEL: - mutex_lock(&data->mutex); - ret = bma400_activity_event_en(data, dir, state); - mutex_unlock(&data->mutex); - return ret; + switch (type) { + case IIO_EV_TYPE_MAG: + mutex_lock(&data->mutex); + ret = bma400_activity_event_en(data, dir, state); + mutex_unlock(&data->mutex); + return ret; + case IIO_EV_TYPE_GESTURE: + mutex_lock(&data->mutex); + ret = bma400_tap_event_en(data, dir, state); + mutex_unlock(&data->mutex); + return ret; + default: + return -EINVAL; + } case IIO_STEPS: mutex_lock(&data->mutex); ret = bma400_steps_event_enable(data, state); @@ -1157,10 +1380,13 @@ static int bma400_read_event_value(struct iio_dev *indio_dev, int *val, int *val2) { struct bma400_data *data = iio_priv(indio_dev); - int ret, reg; + int ret, reg, reg_val, raw; - switch (chan->type) { - case IIO_ACCEL: + if (chan->type != IIO_ACCEL) + return -EINVAL; + + switch (type) { + case IIO_EV_TYPE_MAG: reg = get_gen_config_reg(dir); if (reg < 0) return -EINVAL; @@ -1196,6 +1422,39 @@ static int bma400_read_event_value(struct iio_dev *indio_dev, default: return -EINVAL; } + case IIO_EV_TYPE_GESTURE: + switch (info) { + case IIO_EV_INFO_VALUE: + ret = regmap_read(data->regmap, BMA400_TAP_CONFIG, + ®_val); + if (ret) + return ret; + + *val = FIELD_GET(BMA400_TAP_SEN_MSK, reg_val); + return IIO_VAL_INT; + case IIO_EV_INFO_RESET_TIMEOUT: + ret = regmap_read(data->regmap, BMA400_TAP_CONFIG1, + ®_val); + if (ret) + return ret; + + raw = FIELD_GET(BMA400_TAP_QUIET_MSK, reg_val); + *val = 0; + *val2 = tap_reset_timeout[raw]; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_EV_INFO_TAP2_MIN_DELAY: + ret = regmap_read(data->regmap, BMA400_TAP_CONFIG1, + ®_val); + if (ret) + return ret; + + raw = FIELD_GET(BMA400_TAP_QUIETDT_MSK, reg_val); + *val = 0; + *val2 = double_tap2_min_delay[raw]; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } default: return -EINVAL; } @@ -1209,10 +1468,13 @@ static int bma400_write_event_value(struct iio_dev *indio_dev, int val, int val2) { struct bma400_data *data = iio_priv(indio_dev); - int reg, ret; + int reg, ret, raw; - switch (chan->type) { - case IIO_ACCEL: + if (chan->type != IIO_ACCEL) + return -EINVAL; + + switch (type) { + case IIO_EV_TYPE_MAG: reg = get_gen_config_reg(dir); if (reg < 0) return -EINVAL; @@ -1248,6 +1510,40 @@ static int bma400_write_event_value(struct iio_dev *indio_dev, default: return -EINVAL; } + case IIO_EV_TYPE_GESTURE: + switch (info) { + case IIO_EV_INFO_VALUE: + if (val < 0 || val > 7) + return -EINVAL; + + return regmap_update_bits(data->regmap, + BMA400_TAP_CONFIG, + BMA400_TAP_SEN_MSK, + FIELD_PREP(BMA400_TAP_SEN_MSK, + val)); + case IIO_EV_INFO_RESET_TIMEOUT: + raw = usec_to_tapreg_raw(val2, tap_reset_timeout); + if (raw < 0) + return -EINVAL; + + return regmap_update_bits(data->regmap, + BMA400_TAP_CONFIG1, + BMA400_TAP_QUIET_MSK, + FIELD_PREP(BMA400_TAP_QUIET_MSK, + raw)); + case IIO_EV_INFO_TAP2_MIN_DELAY: + raw = usec_to_tapreg_raw(val2, double_tap2_min_delay); + if (raw < 0) + return -EINVAL; + + return regmap_update_bits(data->regmap, + BMA400_TAP_CONFIG1, + BMA400_TAP_QUIETDT_MSK, + FIELD_PREP(BMA400_TAP_QUIETDT_MSK, + raw)); + default: + return -EINVAL; + } default: return -EINVAL; } @@ -1287,6 +1583,7 @@ static const struct iio_info bma400_info = { .write_event_config = bma400_write_event_config, .write_event_value = bma400_write_event_value, .read_event_value = bma400_read_event_value, + .event_attrs = &bma400_event_attribute_group, }; static const struct iio_trigger_ops bma400_trigger_ops = { @@ -1350,6 +1647,32 @@ static irqreturn_t bma400_interrupt(int irq, void *private) if (ret || !data->status) goto unlock_err; + /* + * Disable all advance interrupts if interrupt engine overrun occurs. + * See section 4.7 "Interrupt engine overrun" in datasheet v1.2. + */ + if (FIELD_GET(BMA400_INT_ENG_OVRUN_MSK, le16_to_cpu(data->status))) { + bma400_disable_adv_interrupt(data); + dev_err(data->dev, "Interrupt engine overrun\n"); + goto unlock_err; + } + + if (FIELD_GET(BMA400_INT_S_TAP_MSK, le16_to_cpu(data->status))) + iio_push_event(indio_dev, + IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, + IIO_MOD_X_OR_Y_OR_Z, + IIO_EV_TYPE_GESTURE, + IIO_EV_DIR_SINGLETAP), + timestamp); + + if (FIELD_GET(BMA400_INT_D_TAP_MSK, le16_to_cpu(data->status))) + iio_push_event(indio_dev, + IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, + IIO_MOD_X_OR_Y_OR_Z, + IIO_EV_TYPE_GESTURE, + IIO_EV_DIR_DOUBLETAP), + timestamp); + if (FIELD_GET(BMA400_INT_GEN1_MSK, le16_to_cpu(data->status))) ev_dir = IIO_EV_DIR_RISING; @@ -1467,5 +1790,6 @@ int bma400_probe(struct device *dev, struct regmap *regmap, int irq, EXPORT_SYMBOL_NS(bma400_probe, IIO_BMA400); MODULE_AUTHOR("Dan Robertson <dan@dlrobertson.com>"); +MODULE_AUTHOR("Jagath Jog J <jagathjog1996@gmail.com>"); MODULE_DESCRIPTION("Bosch BMA400 triaxial acceleration sensor core"); MODULE_LICENSE("GPL"); diff --git a/drivers/iio/accel/bmi088-accel-core.c b/drivers/iio/accel/bmi088-accel-core.c index bca4cf98bf4d..84edcc78d796 100644 --- a/drivers/iio/accel/bmi088-accel-core.c +++ b/drivers/iio/accel/bmi088-accel-core.c @@ -606,7 +606,7 @@ void bmi088_accel_core_remove(struct device *dev) } EXPORT_SYMBOL_NS_GPL(bmi088_accel_core_remove, IIO_BMI088); -static int __maybe_unused bmi088_accel_runtime_suspend(struct device *dev) +static int bmi088_accel_runtime_suspend(struct device *dev) { struct iio_dev *indio_dev = dev_get_drvdata(dev); struct bmi088_accel_data *data = iio_priv(indio_dev); @@ -614,7 +614,7 @@ static int __maybe_unused bmi088_accel_runtime_suspend(struct device *dev) return bmi088_accel_power_down(data); } -static int __maybe_unused bmi088_accel_runtime_resume(struct device *dev) +static int bmi088_accel_runtime_resume(struct device *dev) { struct iio_dev *indio_dev = dev_get_drvdata(dev); struct bmi088_accel_data *data = iio_priv(indio_dev); @@ -622,13 +622,10 @@ static int __maybe_unused bmi088_accel_runtime_resume(struct device *dev) return bmi088_accel_power_up(data); } -const struct dev_pm_ops bmi088_accel_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, - pm_runtime_force_resume) - SET_RUNTIME_PM_OPS(bmi088_accel_runtime_suspend, - bmi088_accel_runtime_resume, NULL) -}; -EXPORT_SYMBOL_NS_GPL(bmi088_accel_pm_ops, IIO_BMI088); +EXPORT_NS_GPL_RUNTIME_DEV_PM_OPS(bmi088_accel_pm_ops, + bmi088_accel_runtime_suspend, + bmi088_accel_runtime_resume, NULL, + IIO_BMI088); MODULE_AUTHOR("Niek van Agt <niek.van.agt@topicproducts.com>"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/accel/bmi088-accel-spi.c b/drivers/iio/accel/bmi088-accel-spi.c index 9e2ed3bd5661..ee540edd8412 100644 --- a/drivers/iio/accel/bmi088-accel-spi.c +++ b/drivers/iio/accel/bmi088-accel-spi.c @@ -80,7 +80,7 @@ MODULE_DEVICE_TABLE(spi, bmi088_accel_id); static struct spi_driver bmi088_accel_driver = { .driver = { .name = "bmi088_accel_spi", - .pm = &bmi088_accel_pm_ops, + .pm = pm_ptr(&bmi088_accel_pm_ops), .of_match_table = bmi088_of_match, }, .probe = bmi088_accel_probe, diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c index 94f7b6ac5c87..adc66b3615c0 100644 --- a/drivers/iio/accel/kxcjk-1013.c +++ b/drivers/iio/accel/kxcjk-1013.c @@ -1064,7 +1064,7 @@ static int kxcjk1013_write_event_config(struct iio_dev *indio_dev, /* * We will expect the enable and disable to do operation in - * in reverse order. This will happen here anyway as our + * reverse order. This will happen here anyway as our * resume operation uses sync mode runtime pm calls, the * suspend operation will be delayed by autosuspend delay * So the disable operation will still happen in reverse of diff --git a/drivers/iio/accel/msa311.c b/drivers/iio/accel/msa311.c new file mode 100644 index 000000000000..2fded3759171 --- /dev/null +++ b/drivers/iio/accel/msa311.c @@ -0,0 +1,1321 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * MEMSensing digital 3-Axis accelerometer + * + * MSA311 is a tri-axial, low-g accelerometer with I2C digital output for + * sensitivity consumer applications. It has dynamic user-selectable full + * scales range of +-2g/+-4g/+-8g/+-16g and allows acceleration measurements + * with output data rates from 1Hz to 1000Hz. + * + * MSA311 is available in an ultra small (2mm x 2mm, height 0.95mm) LGA package + * and is guaranteed to operate over -40C to +85C. + * + * This driver supports following MSA311 features: + * - IIO interface + * - Different power modes: NORMAL, SUSPEND + * - ODR (Output Data Rate) selection + * - Scale selection + * - IIO triggered buffer + * - NEW_DATA interrupt + trigger + * + * Below features to be done: + * - Motion Events: ACTIVE, TAP, ORIENT, FREEFALL + * - Low Power mode + * + * Copyright (c) 2022, SberDevices. All Rights Reserved. + * + * Author: Dmitry Rokosov <ddrokosov@sberdevices.ru> + */ + +#include <linux/i2c.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> +#include <linux/string_helpers.h> +#include <linux/units.h> + +#include <linux/iio/buffer.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> + +#define MSA311_SOFT_RESET_REG 0x00 +#define MSA311_PARTID_REG 0x01 +#define MSA311_ACC_X_REG 0x02 +#define MSA311_ACC_Y_REG 0x04 +#define MSA311_ACC_Z_REG 0x06 +#define MSA311_MOTION_INT_REG 0x09 +#define MSA311_DATA_INT_REG 0x0A +#define MSA311_TAP_ACTIVE_STS_REG 0x0B +#define MSA311_ORIENT_STS_REG 0x0C +#define MSA311_RANGE_REG 0x0F +#define MSA311_ODR_REG 0x10 +#define MSA311_PWR_MODE_REG 0x11 +#define MSA311_SWAP_POLARITY_REG 0x12 +#define MSA311_INT_SET_0_REG 0x16 +#define MSA311_INT_SET_1_REG 0x17 +#define MSA311_INT_MAP_0_REG 0x19 +#define MSA311_INT_MAP_1_REG 0x1A +#define MSA311_INT_CONFIG_REG 0x20 +#define MSA311_INT_LATCH_REG 0x21 +#define MSA311_FREEFALL_DUR_REG 0x22 +#define MSA311_FREEFALL_TH_REG 0x23 +#define MSA311_FREEFALL_HY_REG 0x24 +#define MSA311_ACTIVE_DUR_REG 0x27 +#define MSA311_ACTIVE_TH_REG 0x28 +#define MSA311_TAP_DUR_REG 0x2A +#define MSA311_TAP_TH_REG 0x2B +#define MSA311_ORIENT_HY_REG 0x2C +#define MSA311_Z_BLOCK_REG 0x2D +#define MSA311_OFFSET_X_REG 0x38 +#define MSA311_OFFSET_Y_REG 0x39 +#define MSA311_OFFSET_Z_REG 0x3A + +enum msa311_fields { + /* Soft_Reset */ + F_SOFT_RESET_I2C, F_SOFT_RESET_SPI, + /* Motion_Interrupt */ + F_ORIENT_INT, F_S_TAP_INT, F_D_TAP_INT, F_ACTIVE_INT, F_FREEFALL_INT, + /* Data_Interrupt */ + F_NEW_DATA_INT, + /* Tap_Active_Status */ + F_TAP_SIGN, F_TAP_FIRST_X, F_TAP_FIRST_Y, F_TAP_FIRST_Z, F_ACTV_SIGN, + F_ACTV_FIRST_X, F_ACTV_FIRST_Y, F_ACTV_FIRST_Z, + /* Orientation_Status */ + F_ORIENT_Z, F_ORIENT_X_Y, + /* Range */ + F_FS, + /* ODR */ + F_X_AXIS_DIS, F_Y_AXIS_DIS, F_Z_AXIS_DIS, F_ODR, + /* Power Mode/Bandwidth */ + F_PWR_MODE, F_LOW_POWER_BW, + /* Swap_Polarity */ + F_X_POLARITY, F_Y_POLARITY, F_Z_POLARITY, F_X_Y_SWAP, + /* Int_Set_0 */ + F_ORIENT_INT_EN, F_S_TAP_INT_EN, F_D_TAP_INT_EN, F_ACTIVE_INT_EN_Z, + F_ACTIVE_INT_EN_Y, F_ACTIVE_INT_EN_X, + /* Int_Set_1 */ + F_NEW_DATA_INT_EN, F_FREEFALL_INT_EN, + /* Int_Map_0 */ + F_INT1_ORIENT, F_INT1_S_TAP, F_INT1_D_TAP, F_INT1_ACTIVE, + F_INT1_FREEFALL, + /* Int_Map_1 */ + F_INT1_NEW_DATA, + /* Int_Config */ + F_INT1_OD, F_INT1_LVL, + /* Int_Latch */ + F_RESET_INT, F_LATCH_INT, + /* Freefall_Hy */ + F_FREEFALL_MODE, F_FREEFALL_HY, + /* Active_Dur */ + F_ACTIVE_DUR, + /* Tap_Dur */ + F_TAP_QUIET, F_TAP_SHOCK, F_TAP_DUR, + /* Tap_Th */ + F_TAP_TH, + /* Orient_Hy */ + F_ORIENT_HYST, F_ORIENT_BLOCKING, F_ORIENT_MODE, + /* Z_Block */ + F_Z_BLOCKING, + /* End of register map */ + F_MAX_FIELDS, +}; + +static const struct reg_field msa311_reg_fields[] = { + /* Soft_Reset */ + [F_SOFT_RESET_I2C] = REG_FIELD(MSA311_SOFT_RESET_REG, 2, 2), + [F_SOFT_RESET_SPI] = REG_FIELD(MSA311_SOFT_RESET_REG, 5, 5), + /* Motion_Interrupt */ + [F_ORIENT_INT] = REG_FIELD(MSA311_MOTION_INT_REG, 6, 6), + [F_S_TAP_INT] = REG_FIELD(MSA311_MOTION_INT_REG, 5, 5), + [F_D_TAP_INT] = REG_FIELD(MSA311_MOTION_INT_REG, 4, 4), + [F_ACTIVE_INT] = REG_FIELD(MSA311_MOTION_INT_REG, 2, 2), + [F_FREEFALL_INT] = REG_FIELD(MSA311_MOTION_INT_REG, 0, 0), + /* Data_Interrupt */ + [F_NEW_DATA_INT] = REG_FIELD(MSA311_DATA_INT_REG, 0, 0), + /* Tap_Active_Status */ + [F_TAP_SIGN] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 7, 7), + [F_TAP_FIRST_X] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 6, 6), + [F_TAP_FIRST_Y] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 5, 5), + [F_TAP_FIRST_Z] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 4, 4), + [F_ACTV_SIGN] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 3, 3), + [F_ACTV_FIRST_X] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 2, 2), + [F_ACTV_FIRST_Y] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 1, 1), + [F_ACTV_FIRST_Z] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 0, 0), + /* Orientation_Status */ + [F_ORIENT_Z] = REG_FIELD(MSA311_ORIENT_STS_REG, 6, 6), + [F_ORIENT_X_Y] = REG_FIELD(MSA311_ORIENT_STS_REG, 4, 5), + /* Range */ + [F_FS] = REG_FIELD(MSA311_RANGE_REG, 0, 1), + /* ODR */ + [F_X_AXIS_DIS] = REG_FIELD(MSA311_ODR_REG, 7, 7), + [F_Y_AXIS_DIS] = REG_FIELD(MSA311_ODR_REG, 6, 6), + [F_Z_AXIS_DIS] = REG_FIELD(MSA311_ODR_REG, 5, 5), + [F_ODR] = REG_FIELD(MSA311_ODR_REG, 0, 3), + /* Power Mode/Bandwidth */ + [F_PWR_MODE] = REG_FIELD(MSA311_PWR_MODE_REG, 6, 7), + [F_LOW_POWER_BW] = REG_FIELD(MSA311_PWR_MODE_REG, 1, 4), + /* Swap_Polarity */ + [F_X_POLARITY] = REG_FIELD(MSA311_SWAP_POLARITY_REG, 3, 3), + [F_Y_POLARITY] = REG_FIELD(MSA311_SWAP_POLARITY_REG, 2, 2), + [F_Z_POLARITY] = REG_FIELD(MSA311_SWAP_POLARITY_REG, 1, 1), + [F_X_Y_SWAP] = REG_FIELD(MSA311_SWAP_POLARITY_REG, 0, 0), + /* Int_Set_0 */ + [F_ORIENT_INT_EN] = REG_FIELD(MSA311_INT_SET_0_REG, 6, 6), + [F_S_TAP_INT_EN] = REG_FIELD(MSA311_INT_SET_0_REG, 5, 5), + [F_D_TAP_INT_EN] = REG_FIELD(MSA311_INT_SET_0_REG, 4, 4), + [F_ACTIVE_INT_EN_Z] = REG_FIELD(MSA311_INT_SET_0_REG, 2, 2), + [F_ACTIVE_INT_EN_Y] = REG_FIELD(MSA311_INT_SET_0_REG, 1, 1), + [F_ACTIVE_INT_EN_X] = REG_FIELD(MSA311_INT_SET_0_REG, 0, 0), + /* Int_Set_1 */ + [F_NEW_DATA_INT_EN] = REG_FIELD(MSA311_INT_SET_1_REG, 4, 4), + [F_FREEFALL_INT_EN] = REG_FIELD(MSA311_INT_SET_1_REG, 3, 3), + /* Int_Map_0 */ + [F_INT1_ORIENT] = REG_FIELD(MSA311_INT_MAP_0_REG, 6, 6), + [F_INT1_S_TAP] = REG_FIELD(MSA311_INT_MAP_0_REG, 5, 5), + [F_INT1_D_TAP] = REG_FIELD(MSA311_INT_MAP_0_REG, 4, 4), + [F_INT1_ACTIVE] = REG_FIELD(MSA311_INT_MAP_0_REG, 2, 2), + [F_INT1_FREEFALL] = REG_FIELD(MSA311_INT_MAP_0_REG, 0, 0), + /* Int_Map_1 */ + [F_INT1_NEW_DATA] = REG_FIELD(MSA311_INT_MAP_1_REG, 0, 0), + /* Int_Config */ + [F_INT1_OD] = REG_FIELD(MSA311_INT_CONFIG_REG, 1, 1), + [F_INT1_LVL] = REG_FIELD(MSA311_INT_CONFIG_REG, 0, 0), + /* Int_Latch */ + [F_RESET_INT] = REG_FIELD(MSA311_INT_LATCH_REG, 7, 7), + [F_LATCH_INT] = REG_FIELD(MSA311_INT_LATCH_REG, 0, 3), + /* Freefall_Hy */ + [F_FREEFALL_MODE] = REG_FIELD(MSA311_FREEFALL_HY_REG, 2, 2), + [F_FREEFALL_HY] = REG_FIELD(MSA311_FREEFALL_HY_REG, 0, 1), + /* Active_Dur */ + [F_ACTIVE_DUR] = REG_FIELD(MSA311_ACTIVE_DUR_REG, 0, 1), + /* Tap_Dur */ + [F_TAP_QUIET] = REG_FIELD(MSA311_TAP_DUR_REG, 7, 7), + [F_TAP_SHOCK] = REG_FIELD(MSA311_TAP_DUR_REG, 6, 6), + [F_TAP_DUR] = REG_FIELD(MSA311_TAP_DUR_REG, 0, 2), + /* Tap_Th */ + [F_TAP_TH] = REG_FIELD(MSA311_TAP_TH_REG, 0, 4), + /* Orient_Hy */ + [F_ORIENT_HYST] = REG_FIELD(MSA311_ORIENT_HY_REG, 4, 6), + [F_ORIENT_BLOCKING] = REG_FIELD(MSA311_ORIENT_HY_REG, 2, 3), + [F_ORIENT_MODE] = REG_FIELD(MSA311_ORIENT_HY_REG, 0, 1), + /* Z_Block */ + [F_Z_BLOCKING] = REG_FIELD(MSA311_Z_BLOCK_REG, 0, 3), +}; + +#define MSA311_WHO_AM_I 0x13 + +/* + * Possible Full Scale ranges + * + * Axis data is 12-bit signed value, so + * + * fs0 = (2 + 2) * 9.81 / (2^11) = 0.009580 + * fs1 = (4 + 4) * 9.81 / (2^11) = 0.019160 + * fs2 = (8 + 8) * 9.81 / (2^11) = 0.038320 + * fs3 = (16 + 16) * 9.81 / (2^11) = 0.076641 + */ +enum { + MSA311_FS_2G, + MSA311_FS_4G, + MSA311_FS_8G, + MSA311_FS_16G, +}; + +struct iio_decimal_fract { + int integral; + int microfract; +}; + +static const struct iio_decimal_fract msa311_fs_table[] = { + {0, 9580}, {0, 19160}, {0, 38320}, {0, 76641}, +}; + +/* Possible Output Data Rate values */ +enum { + MSA311_ODR_1_HZ, + MSA311_ODR_1_95_HZ, + MSA311_ODR_3_9_HZ, + MSA311_ODR_7_81_HZ, + MSA311_ODR_15_63_HZ, + MSA311_ODR_31_25_HZ, + MSA311_ODR_62_5_HZ, + MSA311_ODR_125_HZ, + MSA311_ODR_250_HZ, + MSA311_ODR_500_HZ, + MSA311_ODR_1000_HZ, +}; + +static const struct iio_decimal_fract msa311_odr_table[] = { + {1, 0}, {1, 950000}, {3, 900000}, {7, 810000}, {15, 630000}, + {31, 250000}, {62, 500000}, {125, 0}, {250, 0}, {500, 0}, {1000, 0}, +}; + +/* All supported power modes */ +#define MSA311_PWR_MODE_NORMAL 0b00 +#define MSA311_PWR_MODE_LOW 0b01 +#define MSA311_PWR_MODE_UNKNOWN 0b10 +#define MSA311_PWR_MODE_SUSPEND 0b11 +static const char * const msa311_pwr_modes[] = { + [MSA311_PWR_MODE_NORMAL] = "normal", + [MSA311_PWR_MODE_LOW] = "low", + [MSA311_PWR_MODE_UNKNOWN] = "unknown", + [MSA311_PWR_MODE_SUSPEND] = "suspend", +}; + +/* Autosuspend delay */ +#define MSA311_PWR_SLEEP_DELAY_MS 2000 + +/* Possible INT1 types and levels */ +enum { + MSA311_INT1_OD_PUSH_PULL, + MSA311_INT1_OD_OPEN_DRAIN, +}; + +enum { + MSA311_INT1_LVL_LOW, + MSA311_INT1_LVL_HIGH, +}; + +/* Latch INT modes */ +#define MSA311_LATCH_INT_NOT_LATCHED 0b0000 +#define MSA311_LATCH_INT_250MS 0b0001 +#define MSA311_LATCH_INT_500MS 0b0010 +#define MSA311_LATCH_INT_1S 0b0011 +#define MSA311_LATCH_INT_2S 0b0100 +#define MSA311_LATCH_INT_4S 0b0101 +#define MSA311_LATCH_INT_8S 0b0110 +#define MSA311_LATCH_INT_1MS 0b1010 +#define MSA311_LATCH_INT_2MS 0b1011 +#define MSA311_LATCH_INT_25MS 0b1100 +#define MSA311_LATCH_INT_50MS 0b1101 +#define MSA311_LATCH_INT_100MS 0b1110 +#define MSA311_LATCH_INT_LATCHED 0b0111 + +static const struct regmap_range msa311_readonly_registers[] = { + regmap_reg_range(MSA311_PARTID_REG, MSA311_ORIENT_STS_REG), +}; + +static const struct regmap_access_table msa311_writeable_table = { + .no_ranges = msa311_readonly_registers, + .n_no_ranges = ARRAY_SIZE(msa311_readonly_registers), +}; + +static const struct regmap_range msa311_writeonly_registers[] = { + regmap_reg_range(MSA311_SOFT_RESET_REG, MSA311_SOFT_RESET_REG), +}; + +static const struct regmap_access_table msa311_readable_table = { + .no_ranges = msa311_writeonly_registers, + .n_no_ranges = ARRAY_SIZE(msa311_writeonly_registers), +}; + +static const struct regmap_range msa311_volatile_registers[] = { + regmap_reg_range(MSA311_ACC_X_REG, MSA311_ORIENT_STS_REG), +}; + +static const struct regmap_access_table msa311_volatile_table = { + .yes_ranges = msa311_volatile_registers, + .n_yes_ranges = ARRAY_SIZE(msa311_volatile_registers), +}; + +static const struct regmap_config msa311_regmap_config = { + .name = "msa311", + .reg_bits = 8, + .val_bits = 8, + .max_register = MSA311_OFFSET_Z_REG, + .wr_table = &msa311_writeable_table, + .rd_table = &msa311_readable_table, + .volatile_table = &msa311_volatile_table, + .cache_type = REGCACHE_RBTREE, +}; + +#define MSA311_GENMASK(field) ({ \ + typeof(&(msa311_reg_fields)[0]) _field; \ + _field = &msa311_reg_fields[(field)]; \ + GENMASK(_field->msb, _field->lsb); \ +}) + +/** + * struct msa311_priv - MSA311 internal private state + * @regs: Underlying I2C bus adapter used to abstract slave + * register accesses + * @fields: Abstract objects for each registers fields access + * @dev: Device handler associated with appropriate bus client + * @lock: Protects msa311 device state between setup and data access routines + * (power transitions, samp_freq/scale tune, retrieving axes data, etc) + * @chip_name: Chip name in the format "msa311-%02x" % partid + * @new_data_trig: Optional NEW_DATA interrupt driven trigger used + * to notify external consumers a new sample is ready + * @vdd: Optional external voltage regulator for the device power supply + */ +struct msa311_priv { + struct regmap *regs; + struct regmap_field *fields[F_MAX_FIELDS]; + + struct device *dev; + struct mutex lock; + char *chip_name; + + struct iio_trigger *new_data_trig; + struct regulator *vdd; +}; + +enum msa311_si { + MSA311_SI_X, + MSA311_SI_Y, + MSA311_SI_Z, + MSA311_SI_TIMESTAMP, +}; + +#define MSA311_ACCEL_CHANNEL(axis) { \ + .type = IIO_ACCEL, \ + .modified = 1, \ + .channel2 = IIO_MOD_##axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = MSA311_SI_##axis, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 12, \ + .storagebits = 16, \ + .shift = 4, \ + .endianness = IIO_LE, \ + }, \ + .datasheet_name = "ACC_"#axis, \ +} + +static const struct iio_chan_spec msa311_channels[] = { + MSA311_ACCEL_CHANNEL(X), + MSA311_ACCEL_CHANNEL(Y), + MSA311_ACCEL_CHANNEL(Z), + IIO_CHAN_SOFT_TIMESTAMP(MSA311_SI_TIMESTAMP), +}; + +/** + * msa311_get_odr() - Read Output Data Rate (ODR) value from MSA311 accel + * @msa311: MSA311 internal private state + * @odr: output ODR value + * + * This function should be called under msa311->lock. + * + * Return: 0 on success, -ERRNO in other failures + */ +static int msa311_get_odr(struct msa311_priv *msa311, unsigned int *odr) +{ + int err; + + err = regmap_field_read(msa311->fields[F_ODR], odr); + if (err) + return err; + + /* + * Filter the same 1000Hz ODR register values based on datasheet info. + * ODR can be equal to 1010-1111 for 1000Hz, but function returns 1010 + * all the time. + */ + if (*odr > MSA311_ODR_1000_HZ) + *odr = MSA311_ODR_1000_HZ; + + return 0; +} + +/** + * msa311_set_odr() - Setup Output Data Rate (ODR) value for MSA311 accel + * @msa311: MSA311 internal private state + * @odr: requested ODR value + * + * This function should be called under msa311->lock. Possible ODR values: + * - 1Hz (not available in normal mode) + * - 1.95Hz (not available in normal mode) + * - 3.9Hz + * - 7.81Hz + * - 15.63Hz + * - 31.25Hz + * - 62.5Hz + * - 125Hz + * - 250Hz + * - 500Hz + * - 1000Hz + * + * Return: 0 on success, -EINVAL for bad ODR value in the certain power mode, + * -ERRNO in other failures + */ +static int msa311_set_odr(struct msa311_priv *msa311, unsigned int odr) +{ + struct device *dev = msa311->dev; + unsigned int pwr_mode; + bool good_odr; + int err; + + err = regmap_field_read(msa311->fields[F_PWR_MODE], &pwr_mode); + if (err) + return err; + + /* Filter bad ODR values */ + if (pwr_mode == MSA311_PWR_MODE_NORMAL) + good_odr = (odr > MSA311_ODR_1_95_HZ); + else + good_odr = false; + + if (!good_odr) { + dev_err(dev, + "can't set odr %u.%06uHz, not available in %s mode\n", + msa311_odr_table[odr].integral, + msa311_odr_table[odr].microfract, + msa311_pwr_modes[pwr_mode]); + return -EINVAL; + } + + return regmap_field_write(msa311->fields[F_ODR], odr); +} + +/** + * msa311_wait_for_next_data() - Wait next accel data available after resume + * @msa311: MSA311 internal private state + * + * Return: 0 on success, -EINTR if msleep() was interrupted, + * -ERRNO in other failures + */ +static int msa311_wait_for_next_data(struct msa311_priv *msa311) +{ + static const unsigned int unintr_thresh_ms = 20; + struct device *dev = msa311->dev; + unsigned long freq_uhz; + unsigned long wait_ms; + unsigned int odr; + int err; + + err = msa311_get_odr(msa311, &odr); + if (err) { + dev_err(dev, "can't get actual frequency (%pe)\n", + ERR_PTR(err)); + return err; + } + + /* + * After msa311 resuming is done, we need to wait for data + * to be refreshed by accel logic. + * A certain timeout is calculated based on the current ODR value. + * If requested timeout isn't so long (let's assume 20ms), + * we can wait for next data in uninterruptible sleep. + */ + freq_uhz = msa311_odr_table[odr].integral * MICROHZ_PER_HZ + + msa311_odr_table[odr].microfract; + wait_ms = (MICROHZ_PER_HZ / freq_uhz) * MSEC_PER_SEC; + + if (wait_ms < unintr_thresh_ms) + usleep_range(wait_ms * USEC_PER_MSEC, + unintr_thresh_ms * USEC_PER_MSEC); + else if (msleep_interruptible(wait_ms)) + return -EINTR; + + return 0; +} + +/** + * msa311_set_pwr_mode() - Install certain MSA311 power mode + * @msa311: MSA311 internal private state + * @mode: Power mode can be equal to NORMAL or SUSPEND + * + * This function should be called under msa311->lock. + * + * Return: 0 on success, -ERRNO on failure + */ +static int msa311_set_pwr_mode(struct msa311_priv *msa311, unsigned int mode) +{ + struct device *dev = msa311->dev; + unsigned int prev_mode; + int err; + + if (mode >= ARRAY_SIZE(msa311_pwr_modes)) + return -EINVAL; + + dev_dbg(dev, "transition to %s mode\n", msa311_pwr_modes[mode]); + + err = regmap_field_read(msa311->fields[F_PWR_MODE], &prev_mode); + if (err) + return err; + + err = regmap_field_write(msa311->fields[F_PWR_MODE], mode); + if (err) + return err; + + /* Wait actual data if we wake up */ + if (prev_mode == MSA311_PWR_MODE_SUSPEND && + mode == MSA311_PWR_MODE_NORMAL) + return msa311_wait_for_next_data(msa311); + + return 0; +} + +/** + * msa311_get_axis() - Read MSA311 accel data for certain IIO channel axis spec + * @msa311: MSA311 internal private state + * @chan: IIO channel specification + * @axis: Output accel axis data for requested IIO channel spec + * + * This function should be called under msa311->lock. + * + * Return: 0 on success, -EINVAL for unknown IIO channel specification, + * -ERRNO in other failures + */ +static int msa311_get_axis(struct msa311_priv *msa311, + const struct iio_chan_spec * const chan, + __le16 *axis) +{ + struct device *dev = msa311->dev; + unsigned int axis_reg; + + if (chan->scan_index < MSA311_SI_X || chan->scan_index > MSA311_SI_Z) { + dev_err(dev, "invalid scan_index value [%d]\n", + chan->scan_index); + return -EINVAL; + } + + /* Axes data layout has 2 byte gap for each axis starting from X axis */ + axis_reg = MSA311_ACC_X_REG + (chan->scan_index << 1); + + return regmap_bulk_read(msa311->regs, axis_reg, axis, sizeof(*axis)); +} + +static int msa311_read_raw_data(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2) +{ + struct msa311_priv *msa311 = iio_priv(indio_dev); + struct device *dev = msa311->dev; + __le16 axis; + int err; + + err = pm_runtime_resume_and_get(dev); + if (err) + return err; + + err = iio_device_claim_direct_mode(indio_dev); + if (err) + return err; + + mutex_lock(&msa311->lock); + err = msa311_get_axis(msa311, chan, &axis); + mutex_unlock(&msa311->lock); + + iio_device_release_direct_mode(indio_dev); + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + if (err) { + dev_err(dev, "can't get axis %s (%pe)\n", + chan->datasheet_name, ERR_PTR(err)); + return err; + } + + /* + * Axis data format is: + * ACC_X = (ACC_X_MSB[7:0] << 4) | ACC_X_LSB[7:4] + */ + *val = sign_extend32(le16_to_cpu(axis) >> chan->scan_type.shift, + chan->scan_type.realbits - 1); + + return IIO_VAL_INT; +} + +static int msa311_read_scale(struct iio_dev *indio_dev, int *val, int *val2) +{ + struct msa311_priv *msa311 = iio_priv(indio_dev); + struct device *dev = msa311->dev; + unsigned int fs; + int err; + + mutex_lock(&msa311->lock); + err = regmap_field_read(msa311->fields[F_FS], &fs); + mutex_unlock(&msa311->lock); + if (err) { + dev_err(dev, "can't get actual scale (%pe)\n", ERR_PTR(err)); + return err; + } + + *val = msa311_fs_table[fs].integral; + *val2 = msa311_fs_table[fs].microfract; + + return IIO_VAL_INT_PLUS_MICRO; +} + +static int msa311_read_samp_freq(struct iio_dev *indio_dev, + int *val, int *val2) +{ + struct msa311_priv *msa311 = iio_priv(indio_dev); + struct device *dev = msa311->dev; + unsigned int odr; + int err; + + mutex_lock(&msa311->lock); + err = msa311_get_odr(msa311, &odr); + mutex_unlock(&msa311->lock); + if (err) { + dev_err(dev, "can't get actual frequency (%pe)\n", + ERR_PTR(err)); + return err; + } + + *val = msa311_odr_table[odr].integral; + *val2 = msa311_odr_table[odr].microfract; + + return IIO_VAL_INT_PLUS_MICRO; +} + +static int msa311_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_RAW: + return msa311_read_raw_data(indio_dev, chan, val, val2); + + case IIO_CHAN_INFO_SCALE: + return msa311_read_scale(indio_dev, val, val2); + + case IIO_CHAN_INFO_SAMP_FREQ: + return msa311_read_samp_freq(indio_dev, val, val2); + + default: + return -EINVAL; + } +} + +static int msa311_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, + int *length, long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + *vals = (int *)msa311_odr_table; + *type = IIO_VAL_INT_PLUS_MICRO; + /* ODR value has 2 ints (integer and fractional parts) */ + *length = ARRAY_SIZE(msa311_odr_table) * 2; + return IIO_AVAIL_LIST; + + case IIO_CHAN_INFO_SCALE: + *vals = (int *)msa311_fs_table; + *type = IIO_VAL_INT_PLUS_MICRO; + /* FS value has 2 ints (integer and fractional parts) */ + *length = ARRAY_SIZE(msa311_fs_table) * 2; + return IIO_AVAIL_LIST; + + default: + return -EINVAL; + } +} + +static int msa311_write_scale(struct iio_dev *indio_dev, int val, int val2) +{ + struct msa311_priv *msa311 = iio_priv(indio_dev); + struct device *dev = msa311->dev; + unsigned int fs; + int err; + + /* We do not have fs >= 1, so skip such values */ + if (val) + return 0; + + err = pm_runtime_resume_and_get(dev); + if (err) + return err; + + err = -EINVAL; + for (fs = 0; fs < ARRAY_SIZE(msa311_fs_table); fs++) + /* Do not check msa311_fs_table[fs].integral, it's always 0 */ + if (val2 == msa311_fs_table[fs].microfract) { + mutex_lock(&msa311->lock); + err = regmap_field_write(msa311->fields[F_FS], fs); + mutex_unlock(&msa311->lock); + break; + } + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + if (err) + dev_err(dev, "can't update scale (%pe)\n", ERR_PTR(err)); + + return err; +} + +static int msa311_write_samp_freq(struct iio_dev *indio_dev, int val, int val2) +{ + struct msa311_priv *msa311 = iio_priv(indio_dev); + struct device *dev = msa311->dev; + unsigned int odr; + int err; + + err = pm_runtime_resume_and_get(dev); + if (err) + return err; + + /* + * Sampling frequency changing is prohibited when buffer mode is + * enabled, because sometimes MSA311 chip returns outliers during + * frequency values growing up in the read operation moment. + */ + err = iio_device_claim_direct_mode(indio_dev); + if (err) + return err; + + err = -EINVAL; + for (odr = 0; odr < ARRAY_SIZE(msa311_odr_table); odr++) + if (val == msa311_odr_table[odr].integral && + val2 == msa311_odr_table[odr].microfract) { + mutex_lock(&msa311->lock); + err = msa311_set_odr(msa311, odr); + mutex_unlock(&msa311->lock); + break; + } + + iio_device_release_direct_mode(indio_dev); + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + if (err) + dev_err(dev, "can't update frequency (%pe)\n", ERR_PTR(err)); + + return err; +} + +static int msa311_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_SCALE: + return msa311_write_scale(indio_dev, val, val2); + + case IIO_CHAN_INFO_SAMP_FREQ: + return msa311_write_samp_freq(indio_dev, val, val2); + + default: + return -EINVAL; + } +} + +static int msa311_debugfs_reg_access(struct iio_dev *indio_dev, + unsigned int reg, unsigned int writeval, + unsigned int *readval) +{ + struct msa311_priv *msa311 = iio_priv(indio_dev); + struct device *dev = msa311->dev; + int err; + + if (reg > regmap_get_max_register(msa311->regs)) + return -EINVAL; + + err = pm_runtime_resume_and_get(dev); + if (err) + return err; + + mutex_lock(&msa311->lock); + + if (readval) + err = regmap_read(msa311->regs, reg, readval); + else + err = regmap_write(msa311->regs, reg, writeval); + + mutex_unlock(&msa311->lock); + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + if (err) + dev_err(dev, "can't %s register %u from debugfs (%pe)\n", + str_read_write(readval), reg, ERR_PTR(err)); + + return err; +} + +static int msa311_buffer_preenable(struct iio_dev *indio_dev) +{ + struct msa311_priv *msa311 = iio_priv(indio_dev); + struct device *dev = msa311->dev; + + return pm_runtime_resume_and_get(dev); +} + +static int msa311_buffer_postdisable(struct iio_dev *indio_dev) +{ + struct msa311_priv *msa311 = iio_priv(indio_dev); + struct device *dev = msa311->dev; + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + return 0; +} + +static int msa311_set_new_data_trig_state(struct iio_trigger *trig, bool state) +{ + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); + struct msa311_priv *msa311 = iio_priv(indio_dev); + struct device *dev = msa311->dev; + int err; + + mutex_lock(&msa311->lock); + err = regmap_field_write(msa311->fields[F_NEW_DATA_INT_EN], state); + mutex_unlock(&msa311->lock); + if (err) + dev_err(dev, + "can't %s buffer due to new_data_int failure (%pe)\n", + str_enable_disable(state), ERR_PTR(err)); + + return err; +} + +static int msa311_validate_device(struct iio_trigger *trig, + struct iio_dev *indio_dev) +{ + return iio_trigger_get_drvdata(trig) == indio_dev ? 0 : -EINVAL; +} + +static irqreturn_t msa311_buffer_thread(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct msa311_priv *msa311 = iio_priv(pf->indio_dev); + struct iio_dev *indio_dev = pf->indio_dev; + const struct iio_chan_spec *chan; + struct device *dev = msa311->dev; + int bit, err, i = 0; + __le16 axis; + struct { + __le16 channels[MSA311_SI_Z + 1]; + s64 ts __aligned(8); + } buf; + + memset(&buf, 0, sizeof(buf)); + + mutex_lock(&msa311->lock); + + for_each_set_bit(bit, indio_dev->active_scan_mask, + indio_dev->masklength) { + chan = &msa311_channels[bit]; + + err = msa311_get_axis(msa311, chan, &axis); + if (err) { + mutex_unlock(&msa311->lock); + dev_err(dev, "can't get axis %s (%pe)\n", + chan->datasheet_name, ERR_PTR(err)); + goto notify_done; + } + + buf.channels[i++] = axis; + } + + mutex_unlock(&msa311->lock); + + iio_push_to_buffers_with_timestamp(indio_dev, &buf, + iio_get_time_ns(indio_dev)); + +notify_done: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static irqreturn_t msa311_irq_thread(int irq, void *p) +{ + struct msa311_priv *msa311 = iio_priv(p); + unsigned int new_data_int_enabled; + struct device *dev = msa311->dev; + int err; + + mutex_lock(&msa311->lock); + + /* + * We do not check NEW_DATA int status, because based on the + * specification it's cleared automatically after a fixed time. + * So just check that is enabled by driver logic. + */ + err = regmap_field_read(msa311->fields[F_NEW_DATA_INT_EN], + &new_data_int_enabled); + + mutex_unlock(&msa311->lock); + if (err) { + dev_err(dev, "can't read new_data interrupt state (%pe)\n", + ERR_PTR(err)); + return IRQ_NONE; + } + + if (new_data_int_enabled) + iio_trigger_poll_chained(msa311->new_data_trig); + + return IRQ_HANDLED; +} + +static const struct iio_info msa311_info = { + .read_raw = msa311_read_raw, + .read_avail = msa311_read_avail, + .write_raw = msa311_write_raw, + .debugfs_reg_access = msa311_debugfs_reg_access, +}; + +static const struct iio_buffer_setup_ops msa311_buffer_setup_ops = { + .preenable = msa311_buffer_preenable, + .postdisable = msa311_buffer_postdisable, +}; + +static const struct iio_trigger_ops msa311_new_data_trig_ops = { + .set_trigger_state = msa311_set_new_data_trig_state, + .validate_device = msa311_validate_device, +}; + +static int msa311_check_partid(struct msa311_priv *msa311) +{ + struct device *dev = msa311->dev; + unsigned int partid; + int err; + + err = regmap_read(msa311->regs, MSA311_PARTID_REG, &partid); + if (err) + return dev_err_probe(dev, err, "failed to read partid\n"); + + if (partid != MSA311_WHO_AM_I) + dev_warn(dev, "invalid partid (%#x), expected (%#x)\n", + partid, MSA311_WHO_AM_I); + + msa311->chip_name = devm_kasprintf(dev, GFP_KERNEL, + "msa311-%02x", partid); + if (!msa311->chip_name) + return dev_err_probe(dev, -ENOMEM, "can't alloc chip name\n"); + + return 0; +} + +static int msa311_soft_reset(struct msa311_priv *msa311) +{ + struct device *dev = msa311->dev; + int err; + + err = regmap_write(msa311->regs, MSA311_SOFT_RESET_REG, + MSA311_GENMASK(F_SOFT_RESET_I2C) | + MSA311_GENMASK(F_SOFT_RESET_SPI)); + if (err) + return dev_err_probe(dev, err, "can't soft reset all logic\n"); + + return 0; +} + +static int msa311_chip_init(struct msa311_priv *msa311) +{ + struct device *dev = msa311->dev; + const char zero_bulk[2] = { }; + int err; + + err = regmap_write(msa311->regs, MSA311_RANGE_REG, MSA311_FS_16G); + if (err) + return dev_err_probe(dev, err, "failed to setup accel range\n"); + + /* Disable all interrupts by default */ + err = regmap_bulk_write(msa311->regs, MSA311_INT_SET_0_REG, + zero_bulk, sizeof(zero_bulk)); + if (err) + return dev_err_probe(dev, err, + "can't disable set0/set1 interrupts\n"); + + /* Unmap all INT1 interrupts by default */ + err = regmap_bulk_write(msa311->regs, MSA311_INT_MAP_0_REG, + zero_bulk, sizeof(zero_bulk)); + if (err) + return dev_err_probe(dev, err, + "failed to unmap map0/map1 interrupts\n"); + + /* Disable all axes by default */ + err = regmap_update_bits(msa311->regs, MSA311_ODR_REG, + MSA311_GENMASK(F_X_AXIS_DIS) | + MSA311_GENMASK(F_Y_AXIS_DIS) | + MSA311_GENMASK(F_Z_AXIS_DIS), 0); + if (err) + return dev_err_probe(dev, err, "can't enable all axes\n"); + + err = msa311_set_odr(msa311, MSA311_ODR_125_HZ); + if (err) + return dev_err_probe(dev, err, + "failed to set accel frequency\n"); + + return 0; +} + +static int msa311_setup_interrupts(struct msa311_priv *msa311) +{ + struct device *dev = msa311->dev; + struct i2c_client *i2c = to_i2c_client(dev); + struct iio_dev *indio_dev = i2c_get_clientdata(i2c); + struct iio_trigger *trig; + int err; + + /* Keep going without interrupts if no initialized I2C IRQ */ + if (i2c->irq <= 0) + return 0; + + err = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL, + msa311_irq_thread, IRQF_ONESHOT, + msa311->chip_name, indio_dev); + if (err) + return dev_err_probe(dev, err, "failed to request IRQ\n"); + + trig = devm_iio_trigger_alloc(dev, "%s-new-data", msa311->chip_name); + if (!trig) + return dev_err_probe(dev, -ENOMEM, + "can't allocate newdata trigger\n"); + + msa311->new_data_trig = trig; + msa311->new_data_trig->ops = &msa311_new_data_trig_ops; + iio_trigger_set_drvdata(msa311->new_data_trig, indio_dev); + + err = devm_iio_trigger_register(dev, msa311->new_data_trig); + if (err) + return dev_err_probe(dev, err, + "can't register newdata trigger\n"); + + err = regmap_field_write(msa311->fields[F_INT1_OD], + MSA311_INT1_OD_PUSH_PULL); + if (err) + return dev_err_probe(dev, err, + "can't enable push-pull interrupt\n"); + + err = regmap_field_write(msa311->fields[F_INT1_LVL], + MSA311_INT1_LVL_HIGH); + if (err) + return dev_err_probe(dev, err, + "can't set active interrupt level\n"); + + err = regmap_field_write(msa311->fields[F_LATCH_INT], + MSA311_LATCH_INT_LATCHED); + if (err) + return dev_err_probe(dev, err, + "can't latch interrupt\n"); + + err = regmap_field_write(msa311->fields[F_RESET_INT], 1); + if (err) + return dev_err_probe(dev, err, + "can't reset interrupt\n"); + + err = regmap_field_write(msa311->fields[F_INT1_NEW_DATA], 1); + if (err) + return dev_err_probe(dev, err, + "can't map new data interrupt\n"); + + return 0; +} + +static int msa311_regmap_init(struct msa311_priv *msa311) +{ + struct regmap_field **fields = msa311->fields; + struct device *dev = msa311->dev; + struct i2c_client *i2c = to_i2c_client(dev); + struct regmap *regmap; + int i; + + regmap = devm_regmap_init_i2c(i2c, &msa311_regmap_config); + if (IS_ERR(regmap)) + return dev_err_probe(dev, PTR_ERR(regmap), + "failed to register i2c regmap\n"); + + msa311->regs = regmap; + + for (i = 0; i < F_MAX_FIELDS; i++) { + fields[i] = devm_regmap_field_alloc(dev, + msa311->regs, + msa311_reg_fields[i]); + if (IS_ERR(msa311->fields[i])) + return dev_err_probe(dev, PTR_ERR(msa311->fields[i]), + "can't alloc field[%d]\n", i); + } + + return 0; +} + +static void msa311_powerdown(void *msa311) +{ + msa311_set_pwr_mode(msa311, MSA311_PWR_MODE_SUSPEND); +} + +static void msa311_vdd_disable(void *vdd) +{ + regulator_disable(vdd); +} + +static int msa311_probe(struct i2c_client *i2c) +{ + struct device *dev = &i2c->dev; + struct msa311_priv *msa311; + struct iio_dev *indio_dev; + int err; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*msa311)); + if (!indio_dev) + return dev_err_probe(dev, -ENOMEM, + "IIO device allocation failed\n"); + + msa311 = iio_priv(indio_dev); + msa311->dev = dev; + i2c_set_clientdata(i2c, indio_dev); + + err = msa311_regmap_init(msa311); + if (err) + return err; + + mutex_init(&msa311->lock); + + msa311->vdd = devm_regulator_get(dev, "vdd"); + if (IS_ERR(msa311->vdd)) + return dev_err_probe(dev, PTR_ERR(msa311->vdd), + "can't get vdd supply\n"); + + err = regulator_enable(msa311->vdd); + if (err) + return dev_err_probe(dev, err, "can't enable vdd supply\n"); + + err = devm_add_action_or_reset(dev, msa311_vdd_disable, msa311->vdd); + if (err) + return dev_err_probe(dev, err, + "can't add vdd disable action\n"); + + err = msa311_check_partid(msa311); + if (err) + return err; + + err = msa311_soft_reset(msa311); + if (err) + return err; + + err = msa311_set_pwr_mode(msa311, MSA311_PWR_MODE_NORMAL); + if (err) + return dev_err_probe(dev, err, "failed to power on device\n"); + + /* + * Register powerdown deferred callback which suspends the chip + * after module unloaded. + * + * MSA311 should be in SUSPEND mode in the two cases: + * 1) When driver is loaded, but we do not have any data or + * configuration requests to it (we are solving it using + * autosuspend feature). + * 2) When driver is unloaded and device is not used (devm action is + * used in this case). + */ + err = devm_add_action_or_reset(dev, msa311_powerdown, msa311); + if (err) + return dev_err_probe(dev, err, "can't add powerdown action\n"); + + err = pm_runtime_set_active(dev); + if (err) + return err; + + err = devm_pm_runtime_enable(dev); + if (err) + return err; + + pm_runtime_get_noresume(dev); + pm_runtime_set_autosuspend_delay(dev, MSA311_PWR_SLEEP_DELAY_MS); + pm_runtime_use_autosuspend(dev); + + err = msa311_chip_init(msa311); + if (err) + return err; + + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = msa311_channels; + indio_dev->num_channels = ARRAY_SIZE(msa311_channels); + indio_dev->name = msa311->chip_name; + indio_dev->info = &msa311_info; + + err = devm_iio_triggered_buffer_setup(dev, indio_dev, + iio_pollfunc_store_time, + msa311_buffer_thread, + &msa311_buffer_setup_ops); + if (err) + return dev_err_probe(dev, err, + "can't setup IIO trigger buffer\n"); + + err = msa311_setup_interrupts(msa311); + if (err) + return err; + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + err = devm_iio_device_register(dev, indio_dev); + if (err) + return dev_err_probe(dev, err, "IIO device register failed\n"); + + return 0; +} + +static int msa311_runtime_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct msa311_priv *msa311 = iio_priv(indio_dev); + int err; + + mutex_lock(&msa311->lock); + err = msa311_set_pwr_mode(msa311, MSA311_PWR_MODE_SUSPEND); + mutex_unlock(&msa311->lock); + if (err) + dev_err(dev, "failed to power off device (%pe)\n", + ERR_PTR(err)); + + return err; +} + +static int msa311_runtime_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct msa311_priv *msa311 = iio_priv(indio_dev); + int err; + + mutex_lock(&msa311->lock); + err = msa311_set_pwr_mode(msa311, MSA311_PWR_MODE_NORMAL); + mutex_unlock(&msa311->lock); + if (err) + dev_err(dev, "failed to power on device (%pe)\n", + ERR_PTR(err)); + + return err; +} + +static DEFINE_RUNTIME_DEV_PM_OPS(msa311_pm_ops, msa311_runtime_suspend, + msa311_runtime_resume, NULL); + +static const struct i2c_device_id msa311_i2c_id[] = { + { .name = "msa311" }, + { } +}; +MODULE_DEVICE_TABLE(i2c, msa311_i2c_id); + +static const struct of_device_id msa311_of_match[] = { + { .compatible = "memsensing,msa311" }, + { } +}; +MODULE_DEVICE_TABLE(of, msa311_of_match); + +static struct i2c_driver msa311_driver = { + .driver = { + .name = "msa311", + .of_match_table = msa311_of_match, + .pm = pm_ptr(&msa311_pm_ops), + }, + .probe_new = msa311_probe, + .id_table = msa311_i2c_id, +}; +module_i2c_driver(msa311_driver); + +MODULE_AUTHOR("Dmitry Rokosov <ddrokosov@sberdevices.ru>"); +MODULE_DESCRIPTION("MEMSensing MSA311 3-axis accelerometer driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 7fe5930891e0..791612ca6012 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -653,6 +653,20 @@ config MAX1118 To compile this driver as a module, choose M here: the module will be called max1118. +config MAX11205 + tristate "Maxim max11205 ADC driver" + depends on SPI + select AD_SIGMA_DELTA + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + + help + Say yes here to build support for Maxim max11205 16-bit, single-channel + ultra-low power delta-sigma ADC. + + To compile this driver as a module, choose M here: the module will be + called max11205. + config MAX1241 tristate "Maxim max1241 ADC driver" depends on SPI_MASTER @@ -718,6 +732,8 @@ config MCP3422 config MCP3911 tristate "Microchip Technology MCP3911 driver" depends on SPI + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help Say yes here to build support for Microchip Technology's MCP3911 analog to digital converter. @@ -919,6 +935,21 @@ config ROCKCHIP_SARADC To compile this driver as a module, choose M here: the module will be called rockchip_saradc. +config RICHTEK_RTQ6056 + tristate "Richtek RTQ6056 Current and Power Monitor ADC" + depends on I2C + select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to enable RQT6056 ADC support. + RTQ6056 is a high accuracy current-sense monitor with I2C and SMBus + compatible interface, and the device provides full information for + system by reading out the load current and power. + + This driver can also be built as a module. If so, the module will be + called rtq6056. + config RZG2L_ADC tristate "Renesas RZ/G2L ADC driver" depends on ARCH_RZG2L || COMPILE_TEST @@ -1022,22 +1053,6 @@ config STMPE_ADC Say yes here to build support for ST Microelectronics STMPE built-in ADC block (stmpe811). -config STX104 - tristate "Apex Embedded Systems STX104 driver" - depends on PC104 && X86 - select ISA_BUS_API - select GPIOLIB - help - Say yes here to build support for the Apex Embedded Systems STX104 - integrated analog PC/104 card. - - This driver supports the 16 channels of single-ended (8 channels of - differential) analog inputs, 2 channels of analog output, 4 digital - inputs, and 4 digital outputs provided by the STX104. - - The base port addresses for the devices may be configured via the base - array module parameter. - config SUN4I_GPADC tristate "Support for the Allwinner SoCs GPADC" depends on IIO diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 1772a549a3c8..46caba7a010c 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -61,6 +61,7 @@ obj-$(CONFIG_LTC2497) += ltc2497.o ltc2497-core.o obj-$(CONFIG_MAX1027) += max1027.o obj-$(CONFIG_MAX11100) += max11100.o obj-$(CONFIG_MAX1118) += max1118.o +obj-$(CONFIG_MAX11205) += max11205.o obj-$(CONFIG_MAX1241) += max1241.o obj-$(CONFIG_MAX1363) += max1363.o obj-$(CONFIG_MAX9611) += max9611.o @@ -85,10 +86,10 @@ obj-$(CONFIG_QCOM_PM8XXX_XOADC) += qcom-pm8xxx-xoadc.o obj-$(CONFIG_RCAR_GYRO_ADC) += rcar-gyroadc.o obj-$(CONFIG_RN5T618_ADC) += rn5t618-adc.o obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o +obj-$(CONFIG_RICHTEK_RTQ6056) += rtq6056.o obj-$(CONFIG_RZG2L_ADC) += rzg2l_adc.o obj-$(CONFIG_SC27XX_ADC) += sc27xx_adc.o obj-$(CONFIG_SPEAR_ADC) += spear_adc.o -obj-$(CONFIG_STX104) += stx104.o obj-$(CONFIG_SUN4I_GPADC) += sun4i-gpadc-iio.o obj-$(CONFIG_STM32_ADC_CORE) += stm32-adc-core.o obj-$(CONFIG_STM32_ADC) += stm32-adc.o diff --git a/drivers/iio/adc/ab8500-gpadc.c b/drivers/iio/adc/ab8500-gpadc.c index 930ce96e6ff5..4fa2126a354b 100644 --- a/drivers/iio/adc/ab8500-gpadc.c +++ b/drivers/iio/adc/ab8500-gpadc.c @@ -925,8 +925,8 @@ static int ab8500_gpadc_read_raw(struct iio_dev *indio_dev, return -EINVAL; } -static int ab8500_gpadc_of_xlate(struct iio_dev *indio_dev, - const struct of_phandle_args *iiospec) +static int ab8500_gpadc_fwnode_xlate(struct iio_dev *indio_dev, + const struct fwnode_reference_args *iiospec) { int i; @@ -938,7 +938,7 @@ static int ab8500_gpadc_of_xlate(struct iio_dev *indio_dev, } static const struct iio_info ab8500_gpadc_info = { - .of_xlate = ab8500_gpadc_of_xlate, + .fwnode_xlate = ab8500_gpadc_fwnode_xlate, .read_raw = ab8500_gpadc_read_raw, }; @@ -968,7 +968,7 @@ static int ab8500_gpadc_runtime_resume(struct device *dev) /** * ab8500_gpadc_parse_channel() - process devicetree channel configuration * @dev: pointer to containing device - * @np: device tree node for the channel to configure + * @fwnode: fw node for the channel to configure * @ch: channel info to fill in * @iio_chan: IIO channel specification to fill in * @@ -976,15 +976,15 @@ static int ab8500_gpadc_runtime_resume(struct device *dev) * and define usage for things like AUX GPADC inputs more precisely. */ static int ab8500_gpadc_parse_channel(struct device *dev, - struct device_node *np, + struct fwnode_handle *fwnode, struct ab8500_gpadc_chan_info *ch, struct iio_chan_spec *iio_chan) { - const char *name = np->name; + const char *name = fwnode_get_name(fwnode); u32 chan; int ret; - ret = of_property_read_u32(np, "reg", &chan); + ret = fwnode_property_read_u32(fwnode, "reg", &chan); if (ret) { dev_err(dev, "invalid channel number %s\n", name); return ret; @@ -1021,22 +1021,20 @@ static int ab8500_gpadc_parse_channel(struct device *dev, /** * ab8500_gpadc_parse_channels() - Parse the GPADC channels from DT * @gpadc: the GPADC to configure the channels for - * @np: device tree node containing the channel configurations * @chans: the IIO channels we parsed * @nchans: the number of IIO channels we parsed */ static int ab8500_gpadc_parse_channels(struct ab8500_gpadc *gpadc, - struct device_node *np, struct iio_chan_spec **chans_parsed, unsigned int *nchans_parsed) { - struct device_node *child; + struct fwnode_handle *child; struct ab8500_gpadc_chan_info *ch; struct iio_chan_spec *iio_chans; unsigned int nchans; int i; - nchans = of_get_available_child_count(np); + nchans = device_get_child_node_count(gpadc->dev); if (!nchans) { dev_err(gpadc->dev, "no channel children\n"); return -ENODEV; @@ -1054,7 +1052,7 @@ static int ab8500_gpadc_parse_channels(struct ab8500_gpadc *gpadc, return -ENOMEM; i = 0; - for_each_available_child_of_node(np, child) { + device_for_each_child_node(gpadc->dev, child) { struct iio_chan_spec *iio_chan; int ret; @@ -1064,7 +1062,7 @@ static int ab8500_gpadc_parse_channels(struct ab8500_gpadc *gpadc, ret = ab8500_gpadc_parse_channel(gpadc->dev, child, ch, iio_chan); if (ret) { - of_node_put(child); + fwnode_handle_put(child); return ret; } i++; @@ -1081,7 +1079,6 @@ static int ab8500_gpadc_probe(struct platform_device *pdev) struct ab8500_gpadc *gpadc; struct iio_dev *indio_dev; struct device *dev = &pdev->dev; - struct device_node *np = pdev->dev.of_node; struct iio_chan_spec *iio_chans; unsigned int n_iio_chans; int ret; @@ -1096,7 +1093,7 @@ static int ab8500_gpadc_probe(struct platform_device *pdev) gpadc->dev = dev; gpadc->ab8500 = dev_get_drvdata(dev->parent); - ret = ab8500_gpadc_parse_channels(gpadc, np, &iio_chans, &n_iio_chans); + ret = ab8500_gpadc_parse_channels(gpadc, &iio_chans, &n_iio_chans); if (ret) return ret; diff --git a/drivers/iio/adc/ad7124.c b/drivers/iio/adc/ad7124.c index c5b785d8b241..4088786e1026 100644 --- a/drivers/iio/adc/ad7124.c +++ b/drivers/iio/adc/ad7124.c @@ -936,11 +936,6 @@ static void ad7124_reg_disable(void *r) regulator_disable(r); } -static void ad7124_clk_disable(void *c) -{ - clk_disable_unprepare(c); -} - static int ad7124_probe(struct spi_device *spi) { const struct ad7124_chip_info *info; @@ -993,18 +988,10 @@ static int ad7124_probe(struct spi_device *spi) return ret; } - st->mclk = devm_clk_get(&spi->dev, "mclk"); + st->mclk = devm_clk_get_enabled(&spi->dev, "mclk"); if (IS_ERR(st->mclk)) return PTR_ERR(st->mclk); - ret = clk_prepare_enable(st->mclk); - if (ret < 0) - return ret; - - ret = devm_add_action_or_reset(&spi->dev, ad7124_clk_disable, st->mclk); - if (ret) - return ret; - ret = ad7124_soft_reset(st); if (ret < 0) return ret; diff --git a/drivers/iio/adc/ad7768-1.c b/drivers/iio/adc/ad7768-1.c index 652db768ef37..70a25949142c 100644 --- a/drivers/iio/adc/ad7768-1.c +++ b/drivers/iio/adc/ad7768-1.c @@ -539,13 +539,6 @@ static void ad7768_regulator_disable(void *data) regulator_disable(st->vref); } -static void ad7768_clk_disable(void *data) -{ - struct ad7768_state *st = data; - - clk_disable_unprepare(st->mclk); -} - static int ad7768_set_channel_label(struct iio_dev *indio_dev, int num_channels) { @@ -600,18 +593,10 @@ static int ad7768_probe(struct spi_device *spi) if (ret) return ret; - st->mclk = devm_clk_get(&spi->dev, "mclk"); + st->mclk = devm_clk_get_enabled(&spi->dev, "mclk"); if (IS_ERR(st->mclk)) return PTR_ERR(st->mclk); - ret = clk_prepare_enable(st->mclk); - if (ret < 0) - return ret; - - ret = devm_add_action_or_reset(&spi->dev, ad7768_clk_disable, st); - if (ret) - return ret; - st->mclk_freq = clk_get_rate(st->mclk); mutex_init(&st->lock); diff --git a/drivers/iio/adc/ad7923.c b/drivers/iio/adc/ad7923.c index edad1f30121d..9d6bf6d0927a 100644 --- a/drivers/iio/adc/ad7923.c +++ b/drivers/iio/adc/ad7923.c @@ -8,6 +8,7 @@ #include <linux/device.h> #include <linux/kernel.h> +#include <linux/property.h> #include <linux/slab.h> #include <linux/sysfs.h> #include <linux/spi/spi.h> @@ -93,6 +94,7 @@ enum ad7923_id { .sign = 'u', \ .realbits = (bits), \ .storagebits = 16, \ + .shift = 12 - (bits), \ .endianness = IIO_BE, \ }, \ } @@ -268,7 +270,8 @@ static int ad7923_read_raw(struct iio_dev *indio_dev, return ret; if (chan->address == EXTRACT(ret, 12, 4)) - *val = EXTRACT(ret, 0, 12); + *val = EXTRACT(ret, chan->scan_type.shift, + chan->scan_type.realbits); else return -EIO; @@ -298,6 +301,7 @@ static void ad7923_regulator_disable(void *data) static int ad7923_probe(struct spi_device *spi) { + u32 ad7923_range = AD7923_RANGE; struct ad7923_state *st; struct iio_dev *indio_dev; const struct ad7923_chip_info *info; @@ -309,8 +313,11 @@ static int ad7923_probe(struct spi_device *spi) st = iio_priv(indio_dev); + if (device_property_read_bool(&spi->dev, "adi,range-double")) + ad7923_range = 0; + st->spi = spi; - st->settings = AD7923_CODING | AD7923_RANGE | + st->settings = AD7923_CODING | ad7923_range | AD7923_PM_MODE_WRITE(AD7923_PM_MODE_OPS); info = &ad7923_chip_info[spi_get_device_id(spi)->driver_data]; diff --git a/drivers/iio/adc/ad9467.c b/drivers/iio/adc/ad9467.c index 5a5f33f7bc8f..7534572f7475 100644 --- a/drivers/iio/adc/ad9467.c +++ b/drivers/iio/adc/ad9467.c @@ -378,13 +378,6 @@ static int ad9467_preenable_setup(struct adi_axi_adc_conv *conv) return ad9467_outputmode_set(st->spi, st->output_mode); } -static void ad9467_clk_disable(void *data) -{ - struct ad9467_state *st = data; - - clk_disable_unprepare(st->clk); -} - static int ad9467_probe(struct spi_device *spi) { const struct ad9467_chip_info *info; @@ -404,18 +397,10 @@ static int ad9467_probe(struct spi_device *spi) st = adi_axi_adc_conv_priv(conv); st->spi = spi; - st->clk = devm_clk_get(&spi->dev, "adc-clk"); + st->clk = devm_clk_get_enabled(&spi->dev, "adc-clk"); if (IS_ERR(st->clk)) return PTR_ERR(st->clk); - ret = clk_prepare_enable(st->clk); - if (ret < 0) - return ret; - - ret = devm_add_action_or_reset(&spi->dev, ad9467_clk_disable, st); - if (ret) - return ret; - st->pwrdown_gpio = devm_gpiod_get_optional(&spi->dev, "powerdown", GPIOD_OUT_LOW); if (IS_ERR(st->pwrdown_gpio)) diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c index 279430c1d88c..4294d6539cdb 100644 --- a/drivers/iio/adc/at91-sama5d2_adc.c +++ b/drivers/iio/adc/at91-sama5d2_adc.c @@ -16,9 +16,11 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/mod_devicetable.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/sched.h> +#include <linux/units.h> #include <linux/wait.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> @@ -26,9 +28,13 @@ #include <linux/iio/trigger.h> #include <linux/iio/trigger_consumer.h> #include <linux/iio/triggered_buffer.h> +#include <linux/nvmem-consumer.h> #include <linux/pinctrl/consumer.h> +#include <linux/pm_runtime.h> #include <linux/regulator/consumer.h> +#include <dt-bindings/iio/adc/at91-sama5d2_adc.h> + struct at91_adc_reg_layout { /* Control Register */ u16 CR; @@ -73,11 +79,14 @@ struct at91_adc_reg_layout { /* Startup Time */ #define AT91_SAMA5D2_MR_STARTUP(v) ((v) << 16) #define AT91_SAMA5D2_MR_STARTUP_MASK GENMASK(19, 16) +/* Minimum startup time for temperature sensor */ +#define AT91_SAMA5D2_MR_STARTUP_TS_MIN (50) /* Analog Change */ #define AT91_SAMA5D2_MR_ANACH BIT(23) /* Tracking Time */ #define AT91_SAMA5D2_MR_TRACKTIM(v) ((v) << 24) -#define AT91_SAMA5D2_MR_TRACKTIM_MAX 0xff +#define AT91_SAMA5D2_MR_TRACKTIM_TS 6 +#define AT91_SAMA5D2_MR_TRACKTIM_MAX 0xf /* Transfer Time */ #define AT91_SAMA5D2_MR_TRANSFER(v) ((v) << 28) #define AT91_SAMA5D2_MR_TRANSFER_MAX 0x3 @@ -138,11 +147,19 @@ struct at91_adc_reg_layout { /* Extended Mode Register */ u16 EMR; /* Extended Mode Register - Oversampling rate */ -#define AT91_SAMA5D2_EMR_OSR(V) ((V) << 16) -#define AT91_SAMA5D2_EMR_OSR_MASK GENMASK(17, 16) +#define AT91_SAMA5D2_EMR_OSR(V, M) (((V) << 16) & (M)) #define AT91_SAMA5D2_EMR_OSR_1SAMPLES 0 #define AT91_SAMA5D2_EMR_OSR_4SAMPLES 1 #define AT91_SAMA5D2_EMR_OSR_16SAMPLES 2 +#define AT91_SAMA5D2_EMR_OSR_64SAMPLES 3 +#define AT91_SAMA5D2_EMR_OSR_256SAMPLES 4 + +/* Extended Mode Register - TRACKX */ +#define AT91_SAMA5D2_TRACKX_MASK GENMASK(23, 22) +#define AT91_SAMA5D2_TRACKX(x) (((x) << 22) & \ + AT91_SAMA5D2_TRACKX_MASK) +/* TRACKX for temperature sensor. */ +#define AT91_SAMA5D2_TRACKX_TS (1) /* Extended Mode Register - Averaging on single trigger event */ #define AT91_SAMA5D2_EMR_ASTE(V) ((V) << 20) @@ -159,6 +176,8 @@ struct at91_adc_reg_layout { u16 ACR; /* Analog Control Register - Pen detect sensitivity mask */ #define AT91_SAMA5D2_ACR_PENDETSENS_MASK GENMASK(1, 0) +/* Analog Control Register - Source last channel */ +#define AT91_SAMA5D2_ACR_SRCLCH BIT(16) /* Touchscreen Mode Register */ u16 TSMR; @@ -226,6 +245,10 @@ struct at91_adc_reg_layout { u16 WPSR; /* Version Register */ u16 VERSION; +/* Temperature Sensor Mode Register */ + u16 TEMPMR; +/* Temperature Sensor Mode - Temperature sensor on */ +#define AT91_SAMA5D2_TEMPMR_TEMPON BIT(0) }; static const struct at91_adc_reg_layout sama5d2_layout = { @@ -280,6 +303,7 @@ static const struct at91_adc_reg_layout sama7g5_layout = { .EOC_IDR = 0x38, .EOC_IMR = 0x3c, .EOC_ISR = 0x40, + .TEMPMR = 0x44, .OVER = 0x4c, .EMR = 0x50, .CWR = 0x54, @@ -305,11 +329,6 @@ static const struct at91_adc_reg_layout sama7g5_layout = { #define AT91_HWFIFO_MAX_SIZE_STR "128" #define AT91_HWFIFO_MAX_SIZE 128 -/* Possible values for oversampling ratio */ -#define AT91_OSR_1SAMPLES 1 -#define AT91_OSR_4SAMPLES 4 -#define AT91_OSR_16SAMPLES 16 - #define AT91_SAMA5D2_CHAN_SINGLE(index, num, addr) \ { \ .type = IIO_VOLTAGE, \ @@ -325,6 +344,8 @@ static const struct at91_adc_reg_layout sama7g5_layout = { .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + .info_mask_shared_by_all_available = \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ .datasheet_name = "CH"#num, \ .indexed = 1, \ } @@ -346,6 +367,8 @@ static const struct at91_adc_reg_layout sama7g5_layout = { .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + .info_mask_shared_by_all_available = \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ .datasheet_name = "CH"#num"-CH"#num2, \ .indexed = 1, \ } @@ -365,6 +388,8 @@ static const struct at91_adc_reg_layout sama7g5_layout = { .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + .info_mask_shared_by_all_available = \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ .datasheet_name = name, \ } #define AT91_SAMA5D2_CHAN_PRESSURE(num, name) \ @@ -380,6 +405,23 @@ static const struct at91_adc_reg_layout sama7g5_layout = { .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + .info_mask_shared_by_all_available = \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + .datasheet_name = name, \ + } + +#define AT91_SAMA5D2_CHAN_TEMP(num, name, addr) \ + { \ + .type = IIO_TEMP, \ + .channel = num, \ + .address = addr, \ + .scan_index = num, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \ + .info_mask_shared_by_all = \ + BIT(IIO_CHAN_INFO_PROCESSED) | \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + .info_mask_shared_by_all_available = \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ .datasheet_name = name, \ } @@ -403,6 +445,12 @@ static const struct at91_adc_reg_layout sama7g5_layout = { * @max_index: highest channel index (highest index may be higher * than the total channel number) * @hw_trig_cnt: number of possible hardware triggers + * @osr_mask: oversampling ratio bitmask on EMR register + * @oversampling_avail: available oversampling values + * @oversampling_avail_no: number of available oversampling values + * @chan_realbits: realbits for registered channels + * @temp_chan: temperature channel index + * @temp_sensor: temperature sensor supported */ struct at91_adc_platform { const struct at91_adc_reg_layout *layout; @@ -414,20 +462,58 @@ struct at91_adc_platform { unsigned int max_channels; unsigned int max_index; unsigned int hw_trig_cnt; + unsigned int osr_mask; + unsigned int oversampling_avail[5]; + unsigned int oversampling_avail_no; + unsigned int chan_realbits; + unsigned int temp_chan; + bool temp_sensor; +}; + +/** + * struct at91_adc_temp_sensor_clb - at91-sama5d2 temperature sensor + * calibration data structure + * @p1: P1 calibration temperature + * @p4: P4 calibration voltage + * @p6: P6 calibration voltage + */ +struct at91_adc_temp_sensor_clb { + u32 p1; + u32 p4; + u32 p6; +}; + +/** + * enum at91_adc_ts_clb_idx - calibration indexes in NVMEM buffer + * @AT91_ADC_TS_CLB_IDX_P1: index for P1 + * @AT91_ADC_TS_CLB_IDX_P4: index for P4 + * @AT91_ADC_TS_CLB_IDX_P6: index for P6 + * @AT91_ADC_TS_CLB_IDX_MAX: max index for temperature calibration packet in OTP + */ +enum at91_adc_ts_clb_idx { + AT91_ADC_TS_CLB_IDX_P1 = 2, + AT91_ADC_TS_CLB_IDX_P4 = 5, + AT91_ADC_TS_CLB_IDX_P6 = 7, + AT91_ADC_TS_CLB_IDX_MAX = 19, }; +/* Temperature sensor calibration - Vtemp voltage sensitivity to temperature. */ +#define AT91_ADC_TS_VTEMP_DT (2080U) + /** * struct at91_adc_soc_info - at91-sama5d2 soc information struct * @startup_time: device startup time * @min_sample_rate: minimum sample rate in Hz * @max_sample_rate: maximum sample rate in Hz * @platform: pointer to the platform structure + * @temp_sensor_clb: temperature sensor calibration data structure */ struct at91_adc_soc_info { unsigned startup_time; unsigned min_sample_rate; unsigned max_sample_rate; const struct at91_adc_platform *platform; + struct at91_adc_temp_sensor_clb temp_sensor_clb; }; struct at91_adc_trigger { @@ -475,6 +561,18 @@ struct at91_adc_touch { struct work_struct workq; }; +/** + * struct at91_adc_temp - at91-sama5d2 temperature information structure + * @sample_period_val: sample period value + * @saved_sample_rate: saved sample rate + * @saved_oversampling: saved oversampling + */ +struct at91_adc_temp { + u16 sample_period_val; + u16 saved_sample_rate; + u16 saved_oversampling; +}; + /* * Buffer size requirements: * No channels * bytes_per_channel(2) + timestamp bytes (8) @@ -502,7 +600,9 @@ struct at91_adc_state { wait_queue_head_t wq_data_available; struct at91_adc_dma dma_st; struct at91_adc_touch touch_st; + struct at91_adc_temp temp_st; struct iio_dev *indio_dev; + struct device *dev; /* Ensure naturally aligned timestamp */ u16 buffer[AT91_BUFFER_MAX_HWORDS] __aligned(8); /* @@ -591,6 +691,7 @@ static const struct iio_chan_spec at91_sama7g5_adc_channels[] = { AT91_SAMA5D2_CHAN_DIFF(22, 12, 13, 0x90), AT91_SAMA5D2_CHAN_DIFF(23, 14, 15, 0x98), IIO_CHAN_SOFT_TIMESTAMP(24), + AT91_SAMA5D2_CHAN_TEMP(AT91_SAMA7G5_ADC_TEMP_CHANNEL, "temp", 0xdc), }; static const struct at91_adc_platform sama5d2_platform = { @@ -612,6 +713,10 @@ static const struct at91_adc_platform sama5d2_platform = { .max_index = AT91_SAMA5D2_MAX_CHAN_IDX, #define AT91_SAMA5D2_HW_TRIG_CNT 3 .hw_trig_cnt = AT91_SAMA5D2_HW_TRIG_CNT, + .osr_mask = GENMASK(17, 16), + .oversampling_avail = { 1, 4, 16, }, + .oversampling_avail_no = 3, + .chan_realbits = 14, }; static const struct at91_adc_platform sama7g5_platform = { @@ -619,14 +724,23 @@ static const struct at91_adc_platform sama7g5_platform = { .adc_channels = &at91_sama7g5_adc_channels, #define AT91_SAMA7G5_SINGLE_CHAN_CNT 16 #define AT91_SAMA7G5_DIFF_CHAN_CNT 8 +#define AT91_SAMA7G5_TEMP_CHAN_CNT 1 .nr_channels = AT91_SAMA7G5_SINGLE_CHAN_CNT + - AT91_SAMA7G5_DIFF_CHAN_CNT, + AT91_SAMA7G5_DIFF_CHAN_CNT + + AT91_SAMA7G5_TEMP_CHAN_CNT, #define AT91_SAMA7G5_MAX_CHAN_IDX (AT91_SAMA7G5_SINGLE_CHAN_CNT + \ - AT91_SAMA7G5_DIFF_CHAN_CNT) + AT91_SAMA7G5_DIFF_CHAN_CNT + \ + AT91_SAMA7G5_TEMP_CHAN_CNT) .max_channels = ARRAY_SIZE(at91_sama7g5_adc_channels), .max_index = AT91_SAMA7G5_MAX_CHAN_IDX, #define AT91_SAMA7G5_HW_TRIG_CNT 3 .hw_trig_cnt = AT91_SAMA7G5_HW_TRIG_CNT, + .osr_mask = GENMASK(18, 16), + .oversampling_avail = { 1, 4, 16, 64, 256, }, + .oversampling_avail_no = 5, + .chan_realbits = 16, + .temp_sensor = true, + .temp_chan = AT91_SAMA7G5_ADC_TEMP_CHANNEL, }; static int at91_adc_chan_xlate(struct iio_dev *indio_dev, int chan) @@ -650,8 +764,8 @@ at91_adc_chan_get(struct iio_dev *indio_dev, int chan) return indio_dev->channels + index; } -static inline int at91_adc_of_xlate(struct iio_dev *indio_dev, - const struct of_phandle_args *iiospec) +static inline int at91_adc_fwnode_xlate(struct iio_dev *indio_dev, + const struct fwnode_reference_args *iiospec) { return at91_adc_chan_xlate(indio_dev, iiospec->args[0]); } @@ -725,51 +839,91 @@ static void at91_adc_eoc_ena(struct at91_adc_state *st, unsigned int channel) at91_adc_writel(st, EOC_IER, BIT(channel)); } -static void at91_adc_config_emr(struct at91_adc_state *st) +static int at91_adc_config_emr(struct at91_adc_state *st, + u32 oversampling_ratio, u32 trackx) { /* configure the extended mode register */ - unsigned int emr = at91_adc_readl(st, EMR); - - /* select oversampling per single trigger event */ - emr |= AT91_SAMA5D2_EMR_ASTE(1); + unsigned int emr, osr; + unsigned int osr_mask = st->soc_info.platform->osr_mask; + int i, ret; - /* delete leftover content if it's the case */ - emr &= ~AT91_SAMA5D2_EMR_OSR_MASK; + /* Check against supported oversampling values. */ + for (i = 0; i < st->soc_info.platform->oversampling_avail_no; i++) { + if (oversampling_ratio == st->soc_info.platform->oversampling_avail[i]) + break; + } + if (i == st->soc_info.platform->oversampling_avail_no) + return -EINVAL; /* select oversampling ratio from configuration */ - switch (st->oversampling_ratio) { - case AT91_OSR_1SAMPLES: - emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_1SAMPLES) & - AT91_SAMA5D2_EMR_OSR_MASK; + switch (oversampling_ratio) { + case 1: + osr = AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_1SAMPLES, + osr_mask); break; - case AT91_OSR_4SAMPLES: - emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_4SAMPLES) & - AT91_SAMA5D2_EMR_OSR_MASK; + case 4: + osr = AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_4SAMPLES, + osr_mask); break; - case AT91_OSR_16SAMPLES: - emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_16SAMPLES) & - AT91_SAMA5D2_EMR_OSR_MASK; + case 16: + osr = AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_16SAMPLES, + osr_mask); + break; + case 64: + osr = AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_64SAMPLES, + osr_mask); + break; + case 256: + osr = AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_256SAMPLES, + osr_mask); break; } + ret = pm_runtime_resume_and_get(st->dev); + if (ret < 0) + return ret; + + emr = at91_adc_readl(st, EMR); + /* select oversampling per single trigger event */ + emr |= AT91_SAMA5D2_EMR_ASTE(1); + /* delete leftover content if it's the case */ + emr &= ~(osr_mask | AT91_SAMA5D2_TRACKX_MASK); + /* Update osr and trackx. */ + emr |= osr | AT91_SAMA5D2_TRACKX(trackx); at91_adc_writel(st, EMR, emr); + + pm_runtime_mark_last_busy(st->dev); + pm_runtime_put_autosuspend(st->dev); + + st->oversampling_ratio = oversampling_ratio; + + return 0; } static int at91_adc_adjust_val_osr(struct at91_adc_state *st, int *val) { - if (st->oversampling_ratio == AT91_OSR_1SAMPLES) { - /* - * in this case we only have 12 bits of real data, but channel - * is registered as 14 bits, so shift left two bits - */ - *val <<= 2; - } else if (st->oversampling_ratio == AT91_OSR_4SAMPLES) { - /* - * in this case we have 13 bits of real data, but channel - * is registered as 14 bits, so left shift one bit - */ - *val <<= 1; - } + int nbits, diff; + + if (st->oversampling_ratio == 1) + nbits = 12; + else if (st->oversampling_ratio == 4) + nbits = 13; + else if (st->oversampling_ratio == 16) + nbits = 14; + else if (st->oversampling_ratio == 64) + nbits = 15; + else if (st->oversampling_ratio == 256) + nbits = 16; + else + /* Should not happen. */ + return -EINVAL; + + /* + * We have nbits of real data and channel is registered as + * st->soc_info.platform->chan_realbits, so shift left diff bits. + */ + diff = st->soc_info.platform->chan_realbits - nbits; + *val <<= diff; return IIO_VAL_INT; } @@ -799,15 +953,22 @@ static void at91_adc_adjust_val_osr_array(struct at91_adc_state *st, void *buf, static int at91_adc_configure_touch(struct at91_adc_state *st, bool state) { u32 clk_khz = st->current_sample_rate / 1000; - int i = 0; + int i = 0, ret; u16 pendbc; u32 tsmr, acr; - if (!state) { + if (state) { + ret = pm_runtime_resume_and_get(st->dev); + if (ret < 0) + return ret; + } else { /* disabling touch IRQs and setting mode to no touch enabled */ at91_adc_writel(st, IDR, AT91_SAMA5D2_IER_PEN | AT91_SAMA5D2_IER_NOPEN); at91_adc_writel(st, TSMR, 0); + + pm_runtime_mark_last_busy(st->dev); + pm_runtime_put_autosuspend(st->dev); return 0; } /* @@ -948,10 +1109,9 @@ static int at91_adc_read_pressure(struct at91_adc_state *st, int chan, u16 *val) return IIO_VAL_INT; } -static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state) +static void at91_adc_configure_trigger_registers(struct at91_adc_state *st, + bool state) { - struct iio_dev *indio = iio_trigger_get_drvdata(trig); - struct at91_adc_state *st = iio_priv(indio); u32 status = at91_adc_readl(st, TRGR); /* clear TRGMOD */ @@ -962,6 +1122,26 @@ static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state) /* set/unset hw trigger */ at91_adc_writel(st, TRGR, status); +} + +static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state) +{ + struct iio_dev *indio = iio_trigger_get_drvdata(trig); + struct at91_adc_state *st = iio_priv(indio); + int ret; + + if (state) { + ret = pm_runtime_resume_and_get(st->dev); + if (ret < 0) + return ret; + } + + at91_adc_configure_trigger_registers(st, state); + + if (!state) { + pm_runtime_mark_last_busy(st->dev); + pm_runtime_put_autosuspend(st->dev); + } return 0; } @@ -1120,11 +1300,15 @@ static int at91_adc_buffer_prepare(struct iio_dev *indio_dev) if (!(iio_device_get_current_mode(indio_dev) & INDIO_ALL_TRIGGERED_MODES)) return -EINVAL; + ret = pm_runtime_resume_and_get(st->dev); + if (ret < 0) + return ret; + /* we continue with the triggered buffer */ ret = at91_adc_dma_start(indio_dev); if (ret) { dev_err(&indio_dev->dev, "buffer prepare failed\n"); - return ret; + goto pm_runtime_put; } for_each_set_bit(bit, indio_dev->active_scan_mask, @@ -1135,7 +1319,8 @@ static int at91_adc_buffer_prepare(struct iio_dev *indio_dev) continue; /* these channel types cannot be handled by this trigger */ if (chan->type == IIO_POSITIONRELATIVE || - chan->type == IIO_PRESSURE) + chan->type == IIO_PRESSURE || + chan->type == IIO_TEMP) continue; at91_adc_cor(st, chan); @@ -1146,12 +1331,16 @@ static int at91_adc_buffer_prepare(struct iio_dev *indio_dev) if (at91_adc_buffer_check_use_irq(indio_dev, st)) at91_adc_writel(st, IER, AT91_SAMA5D2_IER_DRDY); - return 0; +pm_runtime_put: + pm_runtime_mark_last_busy(st->dev); + pm_runtime_put_autosuspend(st->dev); + return ret; } static int at91_adc_buffer_postdisable(struct iio_dev *indio_dev) { struct at91_adc_state *st = iio_priv(indio_dev); + int ret; u8 bit; /* check if we are disabling triggered buffer or the touchscreen */ @@ -1162,6 +1351,10 @@ static int at91_adc_buffer_postdisable(struct iio_dev *indio_dev) if (!(iio_device_get_current_mode(indio_dev) & INDIO_ALL_TRIGGERED_MODES)) return -EINVAL; + ret = pm_runtime_resume_and_get(st->dev); + if (ret < 0) + return ret; + /* * For each enable channel we must disable it in hardware. * In the case of DMA, we must read the last converted value @@ -1177,7 +1370,8 @@ static int at91_adc_buffer_postdisable(struct iio_dev *indio_dev) continue; /* these channel types are virtual, no need to do anything */ if (chan->type == IIO_POSITIONRELATIVE || - chan->type == IIO_PRESSURE) + chan->type == IIO_PRESSURE || + chan->type == IIO_TEMP) continue; at91_adc_writel(st, CHDR, BIT(chan->channel)); @@ -1196,6 +1390,9 @@ static int at91_adc_buffer_postdisable(struct iio_dev *indio_dev) if (st->dma_st.dma_chan) dmaengine_terminate_sync(st->dma_st.dma_chan); + pm_runtime_mark_last_busy(st->dev); + pm_runtime_put_autosuspend(st->dev); + return 0; } @@ -1224,6 +1421,7 @@ static struct iio_trigger *at91_adc_allocate_trigger(struct iio_dev *indio, return trig; } + static void at91_adc_trigger_handler_nodma(struct iio_dev *indio_dev, struct iio_poll_func *pf) { @@ -1377,25 +1575,35 @@ static unsigned at91_adc_startup_time(unsigned startup_time_min, return i; } -static void at91_adc_setup_samp_freq(struct iio_dev *indio_dev, unsigned freq) +static void at91_adc_setup_samp_freq(struct iio_dev *indio_dev, unsigned freq, + unsigned int startup_time, + unsigned int tracktim) { struct at91_adc_state *st = iio_priv(indio_dev); unsigned f_per, prescal, startup, mr; + int ret; f_per = clk_get_rate(st->per_clk); prescal = (f_per / (2 * freq)) - 1; - startup = at91_adc_startup_time(st->soc_info.startup_time, - freq / 1000); + startup = at91_adc_startup_time(startup_time, freq / 1000); + + ret = pm_runtime_resume_and_get(st->dev); + if (ret < 0) + return; mr = at91_adc_readl(st, MR); mr &= ~(AT91_SAMA5D2_MR_STARTUP_MASK | AT91_SAMA5D2_MR_PRESCAL_MASK); mr |= AT91_SAMA5D2_MR_STARTUP(startup); mr |= AT91_SAMA5D2_MR_PRESCAL(prescal); + mr |= AT91_SAMA5D2_MR_TRACKTIM(tracktim); at91_adc_writel(st, MR, mr); - dev_dbg(&indio_dev->dev, "freq: %u, startup: %u, prescal: %u\n", - freq, startup, prescal); + pm_runtime_mark_last_busy(st->dev); + pm_runtime_put_autosuspend(st->dev); + + dev_dbg(&indio_dev->dev, "freq: %u, startup: %u, prescal: %u, tracktim=%u\n", + freq, startup, prescal, tracktim); st->current_sample_rate = freq; } @@ -1522,6 +1730,7 @@ static irqreturn_t at91_adc_interrupt(int irq, void *private) return IRQ_HANDLED; } +/* This needs to be called with direct mode claimed and st->lock locked. */ static int at91_adc_read_info_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val) { @@ -1529,50 +1738,46 @@ static int at91_adc_read_info_raw(struct iio_dev *indio_dev, u16 tmp_val; int ret; + ret = pm_runtime_resume_and_get(st->dev); + if (ret < 0) + return ret; + /* * Keep in mind that we cannot use software trigger or touchscreen * if external trigger is enabled */ if (chan->type == IIO_POSITIONRELATIVE) { - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - mutex_lock(&st->lock); - ret = at91_adc_read_position(st, chan->channel, &tmp_val); *val = tmp_val; - mutex_unlock(&st->lock); - iio_device_release_direct_mode(indio_dev); + if (ret > 0) + ret = at91_adc_adjust_val_osr(st, val); - return at91_adc_adjust_val_osr(st, val); + goto pm_runtime_put; } if (chan->type == IIO_PRESSURE) { - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - mutex_lock(&st->lock); - ret = at91_adc_read_pressure(st, chan->channel, &tmp_val); *val = tmp_val; - mutex_unlock(&st->lock); - iio_device_release_direct_mode(indio_dev); + if (ret > 0) + ret = at91_adc_adjust_val_osr(st, val); - return at91_adc_adjust_val_osr(st, val); + goto pm_runtime_put; } - /* in this case we have a voltage channel */ - - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - mutex_lock(&st->lock); + /* in this case we have a voltage or temperature channel */ st->chan = chan; at91_adc_cor(st, chan); at91_adc_writel(st, CHER, BIT(chan->channel)); + /* + * TEMPMR.TEMPON needs to update after CHER otherwise if none + * of the channels are enabled and TEMPMR.TEMPON = 1 will + * trigger DRDY interruption while preparing for temperature read. + */ + if (chan->type == IIO_TEMP) + at91_adc_writel(st, TEMPMR, AT91_SAMA5D2_TEMPMR_TEMPON); at91_adc_eoc_ena(st, chan->channel); at91_adc_writel(st, CR, AT91_SAMA5D2_CR_START); @@ -1592,14 +1797,125 @@ static int at91_adc_read_info_raw(struct iio_dev *indio_dev, } at91_adc_eoc_dis(st, st->chan->channel); + if (chan->type == IIO_TEMP) + at91_adc_writel(st, TEMPMR, 0U); at91_adc_writel(st, CHDR, BIT(chan->channel)); /* Needed to ACK the DRDY interruption */ at91_adc_readl(st, LCDR); +pm_runtime_put: + pm_runtime_mark_last_busy(st->dev); + pm_runtime_put_autosuspend(st->dev); + return ret; +} + +static int at91_adc_read_info_locked(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val) +{ + struct at91_adc_state *st = iio_priv(indio_dev); + int ret; + + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + mutex_lock(&st->lock); + ret = at91_adc_read_info_raw(indio_dev, chan, val); mutex_unlock(&st->lock); iio_device_release_direct_mode(indio_dev); + + return ret; +} + +static void at91_adc_temp_sensor_configure(struct at91_adc_state *st, + bool start) +{ + u32 sample_rate, oversampling_ratio; + u32 startup_time, tracktim, trackx; + + if (start) { + /* + * Configure the sensor for best accuracy: 10MHz frequency, + * oversampling rate of 256, tracktim=0xf and trackx=1. + */ + sample_rate = 10 * MEGA; + oversampling_ratio = 256; + startup_time = AT91_SAMA5D2_MR_STARTUP_TS_MIN; + tracktim = AT91_SAMA5D2_MR_TRACKTIM_TS; + trackx = AT91_SAMA5D2_TRACKX_TS; + + st->temp_st.saved_sample_rate = st->current_sample_rate; + st->temp_st.saved_oversampling = st->oversampling_ratio; + } else { + /* Go back to previous settings. */ + sample_rate = st->temp_st.saved_sample_rate; + oversampling_ratio = st->temp_st.saved_oversampling; + startup_time = st->soc_info.startup_time; + tracktim = 0; + trackx = 0; + } + + at91_adc_setup_samp_freq(st->indio_dev, sample_rate, startup_time, + tracktim); + at91_adc_config_emr(st, oversampling_ratio, trackx); +} + +static int at91_adc_read_temp(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val) +{ + struct at91_adc_state *st = iio_priv(indio_dev); + struct at91_adc_temp_sensor_clb *clb = &st->soc_info.temp_sensor_clb; + u64 div1, div2; + u32 tmp; + int ret, vbg, vtemp; + + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + mutex_lock(&st->lock); + + ret = pm_runtime_resume_and_get(st->dev); + if (ret < 0) + goto unlock; + + at91_adc_temp_sensor_configure(st, true); + + /* Read VBG. */ + tmp = at91_adc_readl(st, ACR); + tmp |= AT91_SAMA5D2_ACR_SRCLCH; + at91_adc_writel(st, ACR, tmp); + ret = at91_adc_read_info_raw(indio_dev, chan, &vbg); + if (ret < 0) + goto restore_config; + + /* Read VTEMP. */ + tmp &= ~AT91_SAMA5D2_ACR_SRCLCH; + at91_adc_writel(st, ACR, tmp); + ret = at91_adc_read_info_raw(indio_dev, chan, &vtemp); + +restore_config: + /* Revert previous settings. */ + at91_adc_temp_sensor_configure(st, false); + pm_runtime_mark_last_busy(st->dev); + pm_runtime_put_autosuspend(st->dev); +unlock: + mutex_unlock(&st->lock); + iio_device_release_direct_mode(indio_dev); + if (ret < 0) + return ret; + + /* + * Temp[milli] = p1[milli] + (vtemp * clb->p6 - clb->p4 * vbg)/ + * (vbg * AT91_ADC_TS_VTEMP_DT) + */ + div1 = DIV_ROUND_CLOSEST_ULL(((u64)vtemp * clb->p6), vbg); + div1 = DIV_ROUND_CLOSEST_ULL((div1 * 1000), AT91_ADC_TS_VTEMP_DT); + div2 = DIV_ROUND_CLOSEST_ULL((u64)clb->p4, AT91_ADC_TS_VTEMP_DT); + div2 *= 1000; + *val = clb->p1 + (int)div1 - (int)div2; + return ret; } @@ -1611,7 +1927,8 @@ static int at91_adc_read_raw(struct iio_dev *indio_dev, switch (mask) { case IIO_CHAN_INFO_RAW: - return at91_adc_read_info_raw(indio_dev, chan, val); + return at91_adc_read_info_locked(indio_dev, chan, val); + case IIO_CHAN_INFO_SCALE: *val = st->vref_uv / 1000; if (chan->differential) @@ -1619,6 +1936,11 @@ static int at91_adc_read_raw(struct iio_dev *indio_dev, *val2 = chan->scan_type.realbits; return IIO_VAL_FRACTIONAL_LOG2; + case IIO_CHAN_INFO_PROCESSED: + if (chan->type != IIO_TEMP) + return -EINVAL; + return at91_adc_read_temp(indio_dev, chan, val); + case IIO_CHAN_INFO_SAMP_FREQ: *val = at91_adc_get_sample_freq(st); return IIO_VAL_INT; @@ -1637,31 +1959,60 @@ static int at91_adc_write_raw(struct iio_dev *indio_dev, int val, int val2, long mask) { struct at91_adc_state *st = iio_priv(indio_dev); + int ret; switch (mask) { case IIO_CHAN_INFO_OVERSAMPLING_RATIO: - if ((val != AT91_OSR_1SAMPLES) && (val != AT91_OSR_4SAMPLES) && - (val != AT91_OSR_16SAMPLES)) - return -EINVAL; /* if no change, optimize out */ if (val == st->oversampling_ratio) return 0; - st->oversampling_ratio = val; + + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + mutex_lock(&st->lock); /* update ratio */ - at91_adc_config_emr(st); - return 0; + ret = at91_adc_config_emr(st, val, 0); + mutex_unlock(&st->lock); + iio_device_release_direct_mode(indio_dev); + return ret; case IIO_CHAN_INFO_SAMP_FREQ: if (val < st->soc_info.min_sample_rate || val > st->soc_info.max_sample_rate) return -EINVAL; - at91_adc_setup_samp_freq(indio_dev, val); + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + mutex_lock(&st->lock); + at91_adc_setup_samp_freq(indio_dev, val, + st->soc_info.startup_time, 0); + mutex_unlock(&st->lock); + iio_device_release_direct_mode(indio_dev); return 0; default: return -EINVAL; } } +static int at91_adc_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long mask) +{ + struct at91_adc_state *st = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + *vals = (int *)st->soc_info.platform->oversampling_avail; + *type = IIO_VAL_INT; + *length = st->soc_info.platform->oversampling_avail_no; + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } +} + static void at91_adc_dma_init(struct at91_adc_state *st) { struct device *dev = &st->indio_dev->dev; @@ -1817,10 +2168,11 @@ static void at91_adc_hw_init(struct iio_dev *indio_dev) at91_adc_writel(st, MR, AT91_SAMA5D2_MR_TRANSFER(2) | AT91_SAMA5D2_MR_ANACH); - at91_adc_setup_samp_freq(indio_dev, st->soc_info.min_sample_rate); + at91_adc_setup_samp_freq(indio_dev, st->soc_info.min_sample_rate, + st->soc_info.startup_time, 0); /* configure extended mode register */ - at91_adc_config_emr(st); + at91_adc_config_emr(st, st->oversampling_ratio, 0); } static ssize_t at91_adc_get_fifo_state(struct device *dev, @@ -1849,20 +2201,6 @@ static IIO_DEVICE_ATTR(hwfifo_watermark, 0444, static IIO_CONST_ATTR(hwfifo_watermark_min, "2"); static IIO_CONST_ATTR(hwfifo_watermark_max, AT91_HWFIFO_MAX_SIZE_STR); -static IIO_CONST_ATTR(oversampling_ratio_available, - __stringify(AT91_OSR_1SAMPLES) " " - __stringify(AT91_OSR_4SAMPLES) " " - __stringify(AT91_OSR_16SAMPLES)); - -static struct attribute *at91_adc_attributes[] = { - &iio_const_attr_oversampling_ratio_available.dev_attr.attr, - NULL, -}; - -static const struct attribute_group at91_adc_attribute_group = { - .attrs = at91_adc_attributes, -}; - static const struct attribute *at91_adc_fifo_attributes[] = { &iio_const_attr_hwfifo_watermark_min.dev_attr.attr, &iio_const_attr_hwfifo_watermark_max.dev_attr.attr, @@ -1872,11 +2210,11 @@ static const struct attribute *at91_adc_fifo_attributes[] = { }; static const struct iio_info at91_adc_info = { - .attrs = &at91_adc_attribute_group, + .read_avail = &at91_adc_read_avail, .read_raw = &at91_adc_read_raw, .write_raw = &at91_adc_write_raw, .update_scan_mode = &at91_adc_update_scan_mode, - .of_xlate = &at91_adc_of_xlate, + .fwnode_xlate = &at91_adc_fwnode_xlate, .hwfifo_set_watermark = &at91_adc_set_watermark, }; @@ -1918,12 +2256,62 @@ static int at91_adc_buffer_and_trigger_init(struct device *dev, return 0; } +static int at91_adc_temp_sensor_init(struct at91_adc_state *st, + struct device *dev) +{ + struct at91_adc_temp_sensor_clb *clb = &st->soc_info.temp_sensor_clb; + struct nvmem_cell *temp_calib; + u32 *buf; + size_t len; + int ret = 0; + + if (!st->soc_info.platform->temp_sensor) + return 0; + + /* Get the calibration data from NVMEM. */ + temp_calib = devm_nvmem_cell_get(dev, "temperature_calib"); + if (IS_ERR(temp_calib)) { + ret = PTR_ERR(temp_calib); + if (ret != -ENOENT) + dev_err(dev, "Failed to get temperature_calib cell!\n"); + return ret; + } + + buf = nvmem_cell_read(temp_calib, &len); + if (IS_ERR(buf)) { + dev_err(dev, "Failed to read calibration data!\n"); + return PTR_ERR(buf); + } + if (len < AT91_ADC_TS_CLB_IDX_MAX * 4) { + dev_err(dev, "Invalid calibration data!\n"); + ret = -EINVAL; + goto free_buf; + } + + /* Store calibration data for later use. */ + clb->p1 = buf[AT91_ADC_TS_CLB_IDX_P1]; + clb->p4 = buf[AT91_ADC_TS_CLB_IDX_P4]; + clb->p6 = buf[AT91_ADC_TS_CLB_IDX_P6]; + + /* + * We prepare here the conversion to milli and also add constant + * factor (5 degrees Celsius) to p1 here to avoid doing it on + * hotpath. + */ + clb->p1 = clb->p1 * 1000 + 5000; + +free_buf: + kfree(buf); + return ret; +} + static int at91_adc_probe(struct platform_device *pdev) { + struct device *dev = &pdev->dev; struct iio_dev *indio_dev; struct at91_adc_state *st; struct resource *res; - int ret, i; + int ret, i, num_channels; u32 edge_type = IRQ_TYPE_NONE; indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); @@ -1933,13 +2321,20 @@ static int at91_adc_probe(struct platform_device *pdev) st = iio_priv(indio_dev); st->indio_dev = indio_dev; - st->soc_info.platform = of_device_get_match_data(&pdev->dev); + st->soc_info.platform = device_get_match_data(dev); + + ret = at91_adc_temp_sensor_init(st, &pdev->dev); + /* Don't register temperature channel if initialization failed. */ + if (ret) + num_channels = st->soc_info.platform->max_channels - 1; + else + num_channels = st->soc_info.platform->max_channels; indio_dev->name = dev_name(&pdev->dev); indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE; indio_dev->info = &at91_adc_info; indio_dev->channels = *st->soc_info.platform->adc_channels; - indio_dev->num_channels = st->soc_info.platform->max_channels; + indio_dev->num_channels = num_channels; bitmap_set(&st->touch_st.channels_bitmask, st->soc_info.platform->touch_chan_x, 1); @@ -1948,36 +2343,34 @@ static int at91_adc_probe(struct platform_device *pdev) bitmap_set(&st->touch_st.channels_bitmask, st->soc_info.platform->touch_chan_p, 1); - st->oversampling_ratio = AT91_OSR_1SAMPLES; + st->oversampling_ratio = 1; - ret = of_property_read_u32(pdev->dev.of_node, - "atmel,min-sample-rate-hz", - &st->soc_info.min_sample_rate); + ret = device_property_read_u32(dev, "atmel,min-sample-rate-hz", + &st->soc_info.min_sample_rate); if (ret) { dev_err(&pdev->dev, "invalid or missing value for atmel,min-sample-rate-hz\n"); return ret; } - ret = of_property_read_u32(pdev->dev.of_node, - "atmel,max-sample-rate-hz", - &st->soc_info.max_sample_rate); + ret = device_property_read_u32(dev, "atmel,max-sample-rate-hz", + &st->soc_info.max_sample_rate); if (ret) { dev_err(&pdev->dev, "invalid or missing value for atmel,max-sample-rate-hz\n"); return ret; } - ret = of_property_read_u32(pdev->dev.of_node, "atmel,startup-time-ms", - &st->soc_info.startup_time); + ret = device_property_read_u32(dev, "atmel,startup-time-ms", + &st->soc_info.startup_time); if (ret) { dev_err(&pdev->dev, "invalid or missing value for atmel,startup-time-ms\n"); return ret; } - ret = of_property_read_u32(pdev->dev.of_node, - "atmel,trigger-edge-type", &edge_type); + ret = device_property_read_u32(dev, "atmel,trigger-edge-type", + &edge_type); if (ret) { dev_dbg(&pdev->dev, "atmel,trigger-edge-type not specified, only software trigger available\n"); @@ -2051,13 +2444,19 @@ static int at91_adc_probe(struct platform_device *pdev) if (ret) goto vref_disable; - at91_adc_hw_init(indio_dev); - platform_set_drvdata(pdev, indio_dev); + st->dev = &pdev->dev; + pm_runtime_set_autosuspend_delay(st->dev, 500); + pm_runtime_use_autosuspend(st->dev); + pm_runtime_set_active(st->dev); + pm_runtime_enable(st->dev); + pm_runtime_get_noresume(st->dev); + + at91_adc_hw_init(indio_dev); ret = at91_adc_buffer_and_trigger_init(&pdev->dev, indio_dev); if (ret < 0) - goto per_clk_disable_unprepare; + goto err_pm_disable; if (dma_coerce_mask_and_coherent(&indio_dev->dev, DMA_BIT_MASK(32))) dev_info(&pdev->dev, "cannot set DMA mask to 32-bit\n"); @@ -2073,11 +2472,18 @@ static int at91_adc_probe(struct platform_device *pdev) dev_info(&pdev->dev, "version: %x\n", readl_relaxed(st->base + st->soc_info.platform->layout->VERSION)); + pm_runtime_mark_last_busy(st->dev); + pm_runtime_put_autosuspend(st->dev); + return 0; dma_disable: at91_adc_dma_disable(st); -per_clk_disable_unprepare: +err_pm_disable: + pm_runtime_put_noidle(st->dev); + pm_runtime_disable(st->dev); + pm_runtime_set_suspended(st->dev); + pm_runtime_dont_use_autosuspend(st->dev); clk_disable_unprepare(st->per_clk); vref_disable: regulator_disable(st->vref); @@ -2095,6 +2501,8 @@ static int at91_adc_remove(struct platform_device *pdev) at91_adc_dma_disable(st); + pm_runtime_disable(st->dev); + pm_runtime_set_suspended(st->dev); clk_disable_unprepare(st->per_clk); regulator_disable(st->vref); @@ -2107,6 +2515,14 @@ static int at91_adc_suspend(struct device *dev) { struct iio_dev *indio_dev = dev_get_drvdata(dev); struct at91_adc_state *st = iio_priv(indio_dev); + int ret; + + ret = pm_runtime_resume_and_get(st->dev); + if (ret < 0) + return ret; + + if (iio_buffer_enabled(indio_dev)) + at91_adc_buffer_postdisable(indio_dev); /* * Do a sofware reset of the ADC before we go to suspend. @@ -2116,6 +2532,8 @@ static int at91_adc_suspend(struct device *dev) */ at91_adc_writel(st, CR, AT91_SAMA5D2_CR_SWRST); + pm_runtime_mark_last_busy(st->dev); + pm_runtime_put_noidle(st->dev); clk_disable_unprepare(st->per_clk); regulator_disable(st->vref); regulator_disable(st->reg); @@ -2145,21 +2563,28 @@ static int at91_adc_resume(struct device *dev) if (ret) goto vref_disable_resume; + pm_runtime_get_noresume(st->dev); + at91_adc_hw_init(indio_dev); /* reconfiguring trigger hardware state */ - if (!iio_buffer_enabled(indio_dev)) - return 0; + if (iio_buffer_enabled(indio_dev)) { + ret = at91_adc_buffer_prepare(indio_dev); + if (ret) + goto pm_runtime_put; - /* check if we are enabling triggered buffer or the touchscreen */ - if (at91_adc_current_chan_is_touch(indio_dev)) - return at91_adc_configure_touch(st, true); - else - return at91_adc_configure_trigger(st->trig, true); + at91_adc_configure_trigger_registers(st, true); + } + + pm_runtime_mark_last_busy(st->dev); + pm_runtime_put_autosuspend(st->dev); - /* not needed but more explicit */ return 0; +pm_runtime_put: + pm_runtime_mark_last_busy(st->dev); + pm_runtime_put_noidle(st->dev); + clk_disable_unprepare(st->per_clk); vref_disable_resume: regulator_disable(st->vref); reg_disable_resume: @@ -2169,8 +2594,29 @@ resume_failed: return ret; } -static DEFINE_SIMPLE_DEV_PM_OPS(at91_adc_pm_ops, at91_adc_suspend, - at91_adc_resume); +static int at91_adc_runtime_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct at91_adc_state *st = iio_priv(indio_dev); + + clk_disable(st->per_clk); + + return 0; +} + +static int at91_adc_runtime_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct at91_adc_state *st = iio_priv(indio_dev); + + return clk_enable(st->per_clk); +} + +static const struct dev_pm_ops at91_adc_pm_ops = { + SYSTEM_SLEEP_PM_OPS(at91_adc_suspend, at91_adc_resume) + RUNTIME_PM_OPS(at91_adc_runtime_suspend, at91_adc_runtime_resume, + NULL) +}; static const struct of_device_id at91_adc_dt_match[] = { { @@ -2191,7 +2637,7 @@ static struct platform_driver at91_adc_driver = { .driver = { .name = "at91-sama5d2_adc", .of_match_table = at91_adc_dt_match, - .pm = pm_sleep_ptr(&at91_adc_pm_ops), + .pm = pm_ptr(&at91_adc_pm_ops), }, }; module_platform_driver(at91_adc_driver) diff --git a/drivers/iio/adc/imx8qxp-adc.c b/drivers/iio/adc/imx8qxp-adc.c index e48446784a0a..36777b827165 100644 --- a/drivers/iio/adc/imx8qxp-adc.c +++ b/drivers/iio/adc/imx8qxp-adc.c @@ -202,7 +202,7 @@ static int imx8qxp_adc_read_raw(struct iio_dev *indio_dev, struct imx8qxp_adc *adc = iio_priv(indio_dev); struct device *dev = adc->dev; - u32 ctrl, vref_uv; + u32 ctrl; long ret; switch (mask) { @@ -245,8 +245,10 @@ static int imx8qxp_adc_read_raw(struct iio_dev *indio_dev, return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: - vref_uv = regulator_get_voltage(adc->vref); - *val = vref_uv / 1000; + ret = regulator_get_voltage(adc->vref); + if (ret < 0) + return ret; + *val = ret / 1000; *val2 = 12; return IIO_VAL_FRACTIONAL_LOG2; diff --git a/drivers/iio/adc/ingenic-adc.c b/drivers/iio/adc/ingenic-adc.c index bf5c03c34f84..a7325dbbb99a 100644 --- a/drivers/iio/adc/ingenic-adc.c +++ b/drivers/iio/adc/ingenic-adc.c @@ -719,12 +719,12 @@ static int ingenic_adc_read_raw(struct iio_dev *iio_dev, } } -static int ingenic_adc_of_xlate(struct iio_dev *iio_dev, - const struct of_phandle_args *iiospec) +static int ingenic_adc_fwnode_xlate(struct iio_dev *iio_dev, + const struct fwnode_reference_args *iiospec) { int i; - if (!iiospec->args_count) + if (!iiospec->nargs) return -EINVAL; for (i = 0; i < iio_dev->num_channels; ++i) @@ -734,16 +734,11 @@ static int ingenic_adc_of_xlate(struct iio_dev *iio_dev, return -EINVAL; } -static void ingenic_adc_clk_cleanup(void *data) -{ - clk_unprepare(data); -} - static const struct iio_info ingenic_adc_info = { .write_raw = ingenic_adc_write_raw, .read_raw = ingenic_adc_read_raw, .read_avail = ingenic_adc_read_avail, - .of_xlate = ingenic_adc_of_xlate, + .fwnode_xlate = ingenic_adc_fwnode_xlate, }; static int ingenic_adc_buffer_enable(struct iio_dev *iio_dev) @@ -858,13 +853,13 @@ static int ingenic_adc_probe(struct platform_device *pdev) if (IS_ERR(adc->base)) return PTR_ERR(adc->base); - adc->clk = devm_clk_get(dev, "adc"); + adc->clk = devm_clk_get_prepared(dev, "adc"); if (IS_ERR(adc->clk)) { dev_err(dev, "Unable to get clock\n"); return PTR_ERR(adc->clk); } - ret = clk_prepare_enable(adc->clk); + ret = clk_enable(adc->clk); if (ret) { dev_err(dev, "Failed to enable clock\n"); return ret; @@ -893,12 +888,6 @@ static int ingenic_adc_probe(struct platform_device *pdev) usleep_range(2000, 3000); /* Must wait at least 2ms. */ clk_disable(adc->clk); - ret = devm_add_action_or_reset(dev, ingenic_adc_clk_cleanup, adc->clk); - if (ret) { - dev_err(dev, "Unable to add action\n"); - return ret; - } - iio_dev->name = "jz-adc"; iio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE; iio_dev->setup_ops = &ingenic_buffer_setup_ops; diff --git a/drivers/iio/adc/lpc18xx_adc.c b/drivers/iio/adc/lpc18xx_adc.c index 42e6cd6fa6f7..450a243d1f7c 100644 --- a/drivers/iio/adc/lpc18xx_adc.c +++ b/drivers/iio/adc/lpc18xx_adc.c @@ -121,11 +121,6 @@ static void lpc18xx_clear_cr_reg(void *data) writel(0, adc->base + LPC18XX_ADC_CR); } -static void lpc18xx_clk_disable(void *clk) -{ - clk_disable_unprepare(clk); -} - static void lpc18xx_regulator_disable(void *vref) { regulator_disable(vref); @@ -151,7 +146,7 @@ static int lpc18xx_adc_probe(struct platform_device *pdev) if (IS_ERR(adc->base)) return PTR_ERR(adc->base); - adc->clk = devm_clk_get(&pdev->dev, NULL); + adc->clk = devm_clk_get_enabled(&pdev->dev, NULL); if (IS_ERR(adc->clk)) return dev_err_probe(&pdev->dev, PTR_ERR(adc->clk), "error getting clock\n"); @@ -177,17 +172,6 @@ static int lpc18xx_adc_probe(struct platform_device *pdev) if (ret) return ret; - ret = clk_prepare_enable(adc->clk); - if (ret) { - dev_err(&pdev->dev, "unable to enable clock\n"); - return ret; - } - - ret = devm_add_action_or_reset(&pdev->dev, lpc18xx_clk_disable, - adc->clk); - if (ret) - return ret; - rate = clk_get_rate(adc->clk); clkdiv = DIV_ROUND_UP(rate, LPC18XX_ADC_CLK_TARGET); diff --git a/drivers/iio/adc/ltc2496.c b/drivers/iio/adc/ltc2496.c index dfb3bb5997e5..2593fa4322eb 100644 --- a/drivers/iio/adc/ltc2496.c +++ b/drivers/iio/adc/ltc2496.c @@ -15,6 +15,7 @@ #include <linux/iio/driver.h> #include <linux/module.h> #include <linux/mod_devicetable.h> +#include <linux/property.h> #include "ltc2497.h" @@ -74,6 +75,7 @@ static int ltc2496_probe(struct spi_device *spi) spi_set_drvdata(spi, indio_dev); st->spi = spi; st->common_ddata.result_and_measure = ltc2496_result_and_measure; + st->common_ddata.chip_info = device_get_match_data(dev); return ltc2497core_probe(dev, indio_dev); } @@ -85,8 +87,13 @@ static void ltc2496_remove(struct spi_device *spi) ltc2497core_remove(indio_dev); } +static const struct ltc2497_chip_info ltc2496_info = { + .resolution = 16, + .name = NULL, +}; + static const struct of_device_id ltc2496_of_match[] = { - { .compatible = "lltc,ltc2496", }, + { .compatible = "lltc,ltc2496", .data = <c2496_info, }, {}, }; MODULE_DEVICE_TABLE(of, ltc2496_of_match); diff --git a/drivers/iio/adc/ltc2497-core.c b/drivers/iio/adc/ltc2497-core.c index 2a485c8a1940..f52d37af4d1f 100644 --- a/drivers/iio/adc/ltc2497-core.c +++ b/drivers/iio/adc/ltc2497-core.c @@ -95,7 +95,7 @@ static int ltc2497core_read_raw(struct iio_dev *indio_dev, return ret; *val = ret / 1000; - *val2 = 17; + *val2 = ddata->chip_info->resolution + 1; return IIO_VAL_FRACTIONAL_LOG2; @@ -169,7 +169,15 @@ int ltc2497core_probe(struct device *dev, struct iio_dev *indio_dev) struct ltc2497core_driverdata *ddata = iio_priv(indio_dev); int ret; - indio_dev->name = dev_name(dev); + /* + * Keep using dev_name() for the iio_dev's name on some of the parts, + * since updating it would result in a ABI breakage. + */ + if (ddata->chip_info->name) + indio_dev->name = ddata->chip_info->name; + else + indio_dev->name = dev_name(dev); + indio_dev->info = <c2497core_info; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->channels = ltc2497core_channel; diff --git a/drivers/iio/adc/ltc2497.c b/drivers/iio/adc/ltc2497.c index d58a432bafe1..556f10dfb502 100644 --- a/drivers/iio/adc/ltc2497.c +++ b/drivers/iio/adc/ltc2497.c @@ -12,18 +12,31 @@ #include <linux/iio/driver.h> #include <linux/module.h> #include <linux/mod_devicetable.h> +#include <linux/property.h> + +#include <asm/unaligned.h> #include "ltc2497.h" +enum ltc2497_chip_type { + TYPE_LTC2497, + TYPE_LTC2499, +}; + struct ltc2497_driverdata { /* this must be the first member */ struct ltc2497core_driverdata common_ddata; struct i2c_client *client; + u32 recv_size; + u32 sub_lsb; /* * DMA (thus cache coherency maintenance) may require the * transfer buffers to live in their own cache lines. */ - __be32 buf __aligned(IIO_DMA_MINALIGN); + union { + __be32 d32; + u8 d8[3]; + } data __aligned(IIO_DMA_MINALIGN); }; static int ltc2497_result_and_measure(struct ltc2497core_driverdata *ddata, @@ -34,13 +47,43 @@ static int ltc2497_result_and_measure(struct ltc2497core_driverdata *ddata, int ret; if (val) { - ret = i2c_master_recv(st->client, (char *)&st->buf, 3); + if (st->recv_size == 3) + ret = i2c_master_recv(st->client, (char *)&st->data.d8, + st->recv_size); + else + ret = i2c_master_recv(st->client, (char *)&st->data.d32, + st->recv_size); if (ret < 0) { dev_err(&st->client->dev, "i2c_master_recv failed\n"); return ret; } - *val = (be32_to_cpu(st->buf) >> 14) - (1 << 17); + /* + * The data format is 16/24 bit 2s complement, but with an upper sign bit on the + * resolution + 1 position, which is set for positive values only. Given this + * bit's value, subtracting BIT(resolution + 1) from the ADC's result is + * equivalent to a sign extension. + */ + if (st->recv_size == 3) { + *val = (get_unaligned_be24(st->data.d8) >> st->sub_lsb) + - BIT(ddata->chip_info->resolution + 1); + } else { + *val = (be32_to_cpu(st->data.d32) >> st->sub_lsb) + - BIT(ddata->chip_info->resolution + 1); + } + + /* + * The part started a new conversion at the end of the above i2c + * transfer, so if the address didn't change since the last call + * everything is fine and we can return early. + * If not (which should only happen when some sort of bulk + * conversion is implemented) we have to program the new + * address. Note that this probably fails as the conversion that + * was triggered above is like not complete yet and the two + * operations have to be done in a single transfer. + */ + if (ddata->addr_prev == address) + return 0; } ret = i2c_smbus_write_byte(st->client, @@ -54,9 +97,11 @@ static int ltc2497_result_and_measure(struct ltc2497core_driverdata *ddata, static int ltc2497_probe(struct i2c_client *client, const struct i2c_device_id *id) { + const struct ltc2497_chip_info *chip_info; struct iio_dev *indio_dev; struct ltc2497_driverdata *st; struct device *dev = &client->dev; + u32 resolution; if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C | I2C_FUNC_SMBUS_WRITE_BYTE)) @@ -71,6 +116,15 @@ static int ltc2497_probe(struct i2c_client *client, st->client = client; st->common_ddata.result_and_measure = ltc2497_result_and_measure; + chip_info = device_get_match_data(dev); + if (!chip_info) + chip_info = (const struct ltc2497_chip_info *)id->driver_data; + st->common_ddata.chip_info = chip_info; + + resolution = chip_info->resolution; + st->sub_lsb = 31 - (resolution + 1); + st->recv_size = BITS_TO_BYTES(resolution) + 1; + return ltc2497core_probe(dev, indio_dev); } @@ -81,14 +135,27 @@ static void ltc2497_remove(struct i2c_client *client) ltc2497core_remove(indio_dev); } +static const struct ltc2497_chip_info ltc2497_info[] = { + [TYPE_LTC2497] = { + .resolution = 16, + .name = NULL, + }, + [TYPE_LTC2499] = { + .resolution = 24, + .name = "ltc2499", + }, +}; + static const struct i2c_device_id ltc2497_id[] = { - { "ltc2497", 0 }, + { "ltc2497", (kernel_ulong_t)<c2497_info[TYPE_LTC2497] }, + { "ltc2499", (kernel_ulong_t)<c2497_info[TYPE_LTC2499] }, { } }; MODULE_DEVICE_TABLE(i2c, ltc2497_id); static const struct of_device_id ltc2497_of_match[] = { - { .compatible = "lltc,ltc2497", }, + { .compatible = "lltc,ltc2497", .data = <c2497_info[TYPE_LTC2497] }, + { .compatible = "lltc,ltc2499", .data = <c2497_info[TYPE_LTC2499] }, {}, }; MODULE_DEVICE_TABLE(of, ltc2497_of_match); diff --git a/drivers/iio/adc/ltc2497.h b/drivers/iio/adc/ltc2497.h index d0b42dd6b8ad..e023de0d88c4 100644 --- a/drivers/iio/adc/ltc2497.h +++ b/drivers/iio/adc/ltc2497.h @@ -4,9 +4,15 @@ #define LTC2497_CONFIG_DEFAULT LTC2497_ENABLE #define LTC2497_CONVERSION_TIME_MS 150ULL +struct ltc2497_chip_info { + u32 resolution; + const char *name; +}; + struct ltc2497core_driverdata { struct regulator *ref; ktime_t time_prev; + const struct ltc2497_chip_info *chip_info; u8 addr_prev; int (*result_and_measure)(struct ltc2497core_driverdata *ddata, u8 address, int *val); diff --git a/drivers/iio/adc/max11205.c b/drivers/iio/adc/max11205.c new file mode 100644 index 000000000000..65fc32971ba5 --- /dev/null +++ b/drivers/iio/adc/max11205.c @@ -0,0 +1,183 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Maxim MAX11205 16-Bit Delta-Sigma ADC + * + * Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX1240-max11205.pdf + * Copyright (C) 2022 Analog Devices, Inc. + * Author: Ramona Bolboaca <ramona.bolboaca@analog.com> + */ + +#include <linux/device.h> +#include <linux/module.h> +#include <linux/regulator/consumer.h> +#include <linux/spi/spi.h> + +#include <linux/iio/iio.h> +#include <linux/iio/adc/ad_sigma_delta.h> + +#define MAX11205_BIT_SCALE 15 +#define MAX11205A_OUT_DATA_RATE 116 +#define MAX11205B_OUT_DATA_RATE 13 + +enum max11205_chip_type { + TYPE_MAX11205A, + TYPE_MAX11205B, +}; + +struct max11205_chip_info { + unsigned int out_data_rate; + const char *name; +}; + +struct max11205_state { + const struct max11205_chip_info *chip_info; + struct regulator *vref; + struct ad_sigma_delta sd; +}; + +static const struct ad_sigma_delta_info max11205_sigma_delta_info = { + .has_registers = false, +}; + +static int max11205_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct max11205_state *st = iio_priv(indio_dev); + int reg_mv; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + return ad_sigma_delta_single_conversion(indio_dev, chan, val); + case IIO_CHAN_INFO_SCALE: + reg_mv = regulator_get_voltage(st->vref); + if (reg_mv < 0) + return reg_mv; + reg_mv /= 1000; + *val = reg_mv; + *val2 = MAX11205_BIT_SCALE; + return IIO_VAL_FRACTIONAL_LOG2; + case IIO_CHAN_INFO_SAMP_FREQ: + *val = st->chip_info->out_data_rate; + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static const struct iio_info max11205_iio_info = { + .read_raw = max11205_read_raw, + .validate_trigger = ad_sd_validate_trigger, +}; + +static const struct iio_chan_spec max11205_channels[] = { + { + .type = IIO_VOLTAGE, + .indexed = 1, + .scan_type = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_BE, + }, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_SCALE), + }, +}; + +static const struct max11205_chip_info max11205_chip_info[] = { + [TYPE_MAX11205A] = { + .out_data_rate = MAX11205A_OUT_DATA_RATE, + .name = "max11205a", + }, + [TYPE_MAX11205B] = { + .out_data_rate = MAX11205B_OUT_DATA_RATE, + .name = "max11205b", + }, +}; + +static void max11205_reg_disable(void *reg) +{ + regulator_disable(reg); +} + +static int max11205_probe(struct spi_device *spi) +{ + struct max11205_state *st; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + st = iio_priv(indio_dev); + + ad_sd_init(&st->sd, indio_dev, spi, &max11205_sigma_delta_info); + + st->chip_info = device_get_match_data(&spi->dev); + if (!st->chip_info) + st->chip_info = + (const struct max11205_chip_info *)spi_get_device_id(spi)->driver_data; + + indio_dev->name = st->chip_info->name; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = max11205_channels; + indio_dev->num_channels = 1; + indio_dev->info = &max11205_iio_info; + + st->vref = devm_regulator_get(&spi->dev, "vref"); + if (IS_ERR(st->vref)) + return dev_err_probe(&spi->dev, PTR_ERR(st->vref), + "Failed to get vref regulator\n"); + + ret = regulator_enable(st->vref); + if (ret) + return ret; + + ret = devm_add_action_or_reset(&spi->dev, max11205_reg_disable, st->vref); + if (ret) + return ret; + + ret = devm_ad_sd_setup_buffer_and_trigger(&spi->dev, indio_dev); + if (ret) + return ret; + + return devm_iio_device_register(&spi->dev, indio_dev); +} + +static const struct spi_device_id max11205_spi_ids[] = { + { "max11205a", (kernel_ulong_t)&max11205_chip_info[TYPE_MAX11205A] }, + { "max11205b", (kernel_ulong_t)&max11205_chip_info[TYPE_MAX11205B] }, + { } +}; +MODULE_DEVICE_TABLE(spi, max11205_spi_ids); + +static const struct of_device_id max11205_dt_ids[] = { + { + .compatible = "maxim,max11205a", + .data = &max11205_chip_info[TYPE_MAX11205A], + }, + { + .compatible = "maxim,max11205b", + .data = &max11205_chip_info[TYPE_MAX11205B], + }, + { } +}; +MODULE_DEVICE_TABLE(of, max11205_dt_ids); + +static struct spi_driver max11205_spi_driver = { + .driver = { + .name = "max11205", + .of_match_table = max11205_dt_ids, + }, + .probe = max11205_probe, + .id_table = max11205_spi_ids, +}; +module_spi_driver(max11205_spi_driver); + +MODULE_AUTHOR("Ramona Bolboaca <ramona.bolboaca@analog.com>"); +MODULE_DESCRIPTION("MAX11205 ADC driver"); +MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(IIO_AD_SIGMA_DELTA); diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c index eef55ed4814a..a28cf86cdce8 100644 --- a/drivers/iio/adc/max1363.c +++ b/drivers/iio/adc/max1363.c @@ -29,7 +29,6 @@ #include <linux/iio/sysfs.h> #include <linux/iio/events.h> #include <linux/iio/buffer.h> -#include <linux/iio/driver.h> #include <linux/iio/kfifo_buf.h> #include <linux/iio/trigger_consumer.h> #include <linux/iio/triggered_buffer.h> @@ -1595,11 +1594,6 @@ static int max1363_probe(struct i2c_client *client, if (!indio_dev) return -ENOMEM; - ret = devm_iio_map_array_register(&client->dev, indio_dev, - client->dev.platform_data); - if (ret < 0) - return ret; - st = iio_priv(indio_dev); mutex_init(&st->lock); diff --git a/drivers/iio/adc/mcp3911.c b/drivers/iio/adc/mcp3911.c index 890af7dca62d..b35fd2c9c3c0 100644 --- a/drivers/iio/adc/mcp3911.c +++ b/drivers/iio/adc/mcp3911.c @@ -5,16 +5,25 @@ * Copyright (C) 2018 Marcus Folkesson <marcus.folkesson@gmail.com> * Copyright (C) 2018 Kent Gustavsson <kent@minoris.se> */ +#include <linux/bitfield.h> +#include <linux/bits.h> #include <linux/clk.h> #include <linux/delay.h> #include <linux/err.h> -#include <linux/iio/iio.h> #include <linux/module.h> #include <linux/mod_devicetable.h> #include <linux/property.h> #include <linux/regulator/consumer.h> #include <linux/spi/spi.h> +#include <linux/iio/iio.h> +#include <linux/iio/buffer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/trigger.h> + +#include <asm/unaligned.h> + #define MCP3911_REG_CHANNEL0 0x00 #define MCP3911_REG_CHANNEL1 0x03 #define MCP3911_REG_MOD 0x06 @@ -22,6 +31,8 @@ #define MCP3911_REG_GAIN 0x09 #define MCP3911_REG_STATUSCOM 0x0a +#define MCP3911_STATUSCOM_DRHIZ BIT(12) +#define MCP3911_STATUSCOM_READ GENMASK(7, 6) #define MCP3911_STATUSCOM_CH1_24WIDTH BIT(4) #define MCP3911_STATUSCOM_CH0_24WIDTH BIT(3) #define MCP3911_STATUSCOM_EN_OFFCAL BIT(2) @@ -30,6 +41,7 @@ #define MCP3911_REG_CONFIG 0x0c #define MCP3911_CONFIG_CLKEXT BIT(1) #define MCP3911_CONFIG_VREFEXT BIT(2) +#define MCP3911_CONFIG_OSR GENMASK(13, 11) #define MCP3911_REG_OFFCAL_CH0 0x0e #define MCP3911_REG_GAINCAL_CH0 0x11 @@ -48,12 +60,22 @@ #define MCP3911_NUM_CHANNELS 2 +static const int mcp3911_osr_table[] = { 32, 64, 128, 256, 512, 1024, 2048, 4096 }; + struct mcp3911 { struct spi_device *spi; struct mutex lock; struct regulator *vref; struct clk *clki; u32 dev_addr; + struct iio_trigger *trig; + struct { + u32 channels[MCP3911_NUM_CHANNELS]; + s64 ts __aligned(8); + } scan; + + u8 tx_buf __aligned(IIO_DMA_MINALIGN); + u8 rx_buf[MCP3911_NUM_CHANNELS * 3]; }; static int mcp3911_read(struct mcp3911 *adc, u8 reg, u32 *val, u8 len) @@ -98,6 +120,36 @@ static int mcp3911_update(struct mcp3911 *adc, u8 reg, u32 mask, return mcp3911_write(adc, reg, val, len); } +static int mcp3911_write_raw_get_fmt(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_SCALE: + return IIO_VAL_INT_PLUS_NANO; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + return IIO_VAL_INT; + default: + return IIO_VAL_INT_PLUS_NANO; + } +} + +static int mcp3911_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long info) +{ + switch (info) { + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + *type = IIO_VAL_INT; + *vals = mcp3911_osr_table; + *length = ARRAY_SIZE(mcp3911_osr_table); + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } +} + static int mcp3911_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *channel, int *val, int *val2, long mask) @@ -126,6 +178,15 @@ static int mcp3911_read_raw(struct iio_dev *indio_dev, ret = IIO_VAL_INT; break; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + ret = mcp3911_read(adc, MCP3911_REG_CONFIG, val, 2); + if (ret) + goto out; + + *val = FIELD_GET(MCP3911_CONFIG_OSR, *val); + *val = 32 << *val; + ret = IIO_VAL_INT; + break; case IIO_CHAN_INFO_SCALE: if (adc->vref) { @@ -185,6 +246,17 @@ static int mcp3911_write_raw(struct iio_dev *indio_dev, MCP3911_STATUSCOM_EN_OFFCAL, MCP3911_STATUSCOM_EN_OFFCAL, 2); break; + + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + for (int i = 0; i < sizeof(mcp3911_osr_table); i++) { + if (val == mcp3911_osr_table[i]) { + val = FIELD_PREP(MCP3911_CONFIG_OSR, i); + ret = mcp3911_update(adc, MCP3911_REG_CONFIG, MCP3911_CONFIG_OSR, + val, 2); + break; + } + } + break; } out: @@ -196,25 +268,80 @@ out: .type = IIO_VOLTAGE, \ .indexed = 1, \ .channel = idx, \ + .scan_index = idx, \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ BIT(IIO_CHAN_INFO_OFFSET) | \ BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_type_available = \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + .scan_type = { \ + .sign = 's', \ + .realbits = 24, \ + .storagebits = 32, \ + .endianness = IIO_BE, \ + }, \ } static const struct iio_chan_spec mcp3911_channels[] = { MCP3911_CHAN(0), MCP3911_CHAN(1), + IIO_CHAN_SOFT_TIMESTAMP(2), }; +static irqreturn_t mcp3911_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct mcp3911 *adc = iio_priv(indio_dev); + struct spi_transfer xfer[] = { + { + .tx_buf = &adc->tx_buf, + .len = 1, + }, { + .rx_buf = adc->rx_buf, + .len = sizeof(adc->rx_buf), + }, + }; + int scan_index; + int i = 0; + int ret; + + mutex_lock(&adc->lock); + adc->tx_buf = MCP3911_REG_READ(MCP3911_CHANNEL(0), adc->dev_addr); + ret = spi_sync_transfer(adc->spi, xfer, ARRAY_SIZE(xfer)); + if (ret < 0) { + dev_warn(&adc->spi->dev, + "failed to get conversion data\n"); + goto out; + } + + for_each_set_bit(scan_index, indio_dev->active_scan_mask, indio_dev->masklength) { + const struct iio_chan_spec *scan_chan = &indio_dev->channels[scan_index]; + + adc->scan.channels[i] = get_unaligned_be24(&adc->rx_buf[scan_chan->channel * 3]); + i++; + } + iio_push_to_buffers_with_timestamp(indio_dev, &adc->scan, + iio_get_time_ns(indio_dev)); +out: + mutex_unlock(&adc->lock); + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + static const struct iio_info mcp3911_info = { .read_raw = mcp3911_read_raw, .write_raw = mcp3911_write_raw, + .read_avail = mcp3911_read_avail, + .write_raw_get_fmt = mcp3911_write_raw_get_fmt, }; static int mcp3911_config(struct mcp3911 *adc) { struct device *dev = &adc->spi->dev; - u32 configreg; + u32 regval; int ret; ret = device_property_read_u32(dev, "microchip,device-addr", &adc->dev_addr); @@ -233,31 +360,67 @@ static int mcp3911_config(struct mcp3911 *adc) } dev_dbg(&adc->spi->dev, "use device address %i\n", adc->dev_addr); - ret = mcp3911_read(adc, MCP3911_REG_CONFIG, &configreg, 2); + ret = mcp3911_read(adc, MCP3911_REG_CONFIG, ®val, 2); if (ret) return ret; + regval &= ~MCP3911_CONFIG_VREFEXT; if (adc->vref) { dev_dbg(&adc->spi->dev, "use external voltage reference\n"); - configreg |= MCP3911_CONFIG_VREFEXT; + regval |= FIELD_PREP(MCP3911_CONFIG_VREFEXT, 1); } else { dev_dbg(&adc->spi->dev, "use internal voltage reference (1.2V)\n"); - configreg &= ~MCP3911_CONFIG_VREFEXT; + regval |= FIELD_PREP(MCP3911_CONFIG_VREFEXT, 0); } + regval &= ~MCP3911_CONFIG_CLKEXT; if (adc->clki) { dev_dbg(&adc->spi->dev, "use external clock as clocksource\n"); - configreg |= MCP3911_CONFIG_CLKEXT; + regval |= FIELD_PREP(MCP3911_CONFIG_CLKEXT, 1); } else { dev_dbg(&adc->spi->dev, "use crystal oscillator as clocksource\n"); - configreg &= ~MCP3911_CONFIG_CLKEXT; + regval |= FIELD_PREP(MCP3911_CONFIG_CLKEXT, 0); } - return mcp3911_write(adc, MCP3911_REG_CONFIG, configreg, 2); + ret = mcp3911_write(adc, MCP3911_REG_CONFIG, regval, 2); + if (ret) + return ret; + + ret = mcp3911_read(adc, MCP3911_REG_STATUSCOM, ®val, 2); + if (ret) + return ret; + + /* Address counter incremented, cycle through register types */ + regval &= ~MCP3911_STATUSCOM_READ; + regval |= FIELD_PREP(MCP3911_STATUSCOM_READ, 0x02); + + return mcp3911_write(adc, MCP3911_REG_STATUSCOM, regval, 2); } +static void mcp3911_cleanup_regulator(void *vref) +{ + regulator_disable(vref); +} + +static int mcp3911_set_trigger_state(struct iio_trigger *trig, bool enable) +{ + struct mcp3911 *adc = iio_trigger_get_drvdata(trig); + + if (enable) + enable_irq(adc->spi->irq); + else + disable_irq(adc->spi->irq); + + return 0; +} + +static const struct iio_trigger_ops mcp3911_trigger_ops = { + .validate_device = iio_trigger_validate_own_device, + .set_trigger_state = mcp3911_set_trigger_state, +}; + static int mcp3911_probe(struct spi_device *spi) { struct iio_dev *indio_dev; @@ -286,9 +449,14 @@ static int mcp3911_probe(struct spi_device *spi) ret = regulator_enable(adc->vref); if (ret) return ret; + + ret = devm_add_action_or_reset(&spi->dev, + mcp3911_cleanup_regulator, adc->vref); + if (ret) + return ret; } - adc->clki = devm_clk_get(&adc->spi->dev, NULL); + adc->clki = devm_clk_get_enabled(&adc->spi->dev, NULL); if (IS_ERR(adc->clki)) { if (PTR_ERR(adc->clki) == -ENOENT) { adc->clki = NULL; @@ -296,21 +464,22 @@ static int mcp3911_probe(struct spi_device *spi) dev_err(&adc->spi->dev, "failed to get adc clk (%ld)\n", PTR_ERR(adc->clki)); - ret = PTR_ERR(adc->clki); - goto reg_disable; - } - } else { - ret = clk_prepare_enable(adc->clki); - if (ret < 0) { - dev_err(&adc->spi->dev, - "Failed to enable clki: %d\n", ret); - goto reg_disable; + return PTR_ERR(adc->clki); } } ret = mcp3911_config(adc); if (ret) - goto clk_disable; + return ret; + + if (device_property_read_bool(&adc->spi->dev, "microchip,data-ready-hiz")) + ret = mcp3911_update(adc, MCP3911_REG_STATUSCOM, MCP3911_STATUSCOM_DRHIZ, + 0, 2); + else + ret = mcp3911_update(adc, MCP3911_REG_STATUSCOM, MCP3911_STATUSCOM_DRHIZ, + MCP3911_STATUSCOM_DRHIZ, 2); + if (ret) + return ret; indio_dev->name = spi_get_device_id(spi)->name; indio_dev->modes = INDIO_DIRECT_MODE; @@ -322,31 +491,38 @@ static int mcp3911_probe(struct spi_device *spi) mutex_init(&adc->lock); - ret = iio_device_register(indio_dev); - if (ret) - goto clk_disable; - - return ret; - -clk_disable: - clk_disable_unprepare(adc->clki); -reg_disable: - if (adc->vref) - regulator_disable(adc->vref); + if (spi->irq > 0) { + adc->trig = devm_iio_trigger_alloc(&spi->dev, "%s-dev%d", + indio_dev->name, + iio_device_id(indio_dev)); + if (!adc->trig) + return PTR_ERR(adc->trig); - return ret; -} + adc->trig->ops = &mcp3911_trigger_ops; + iio_trigger_set_drvdata(adc->trig, adc); + ret = devm_iio_trigger_register(&spi->dev, adc->trig); + if (ret) + return ret; -static void mcp3911_remove(struct spi_device *spi) -{ - struct iio_dev *indio_dev = spi_get_drvdata(spi); - struct mcp3911 *adc = iio_priv(indio_dev); + /* + * The device generates interrupts as long as it is powered up. + * Some platforms might not allow the option to power it down so + * don't enable the interrupt to avoid extra load on the system. + */ + ret = devm_request_irq(&spi->dev, spi->irq, + &iio_trigger_generic_data_rdy_poll, IRQF_NO_AUTOEN | IRQF_ONESHOT, + indio_dev->name, adc->trig); + if (ret) + return ret; + } - iio_device_unregister(indio_dev); + ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev, + NULL, + mcp3911_trigger_handler, NULL); + if (ret) + return ret; - clk_disable_unprepare(adc->clki); - if (adc->vref) - regulator_disable(adc->vref); + return devm_iio_device_register(&adc->spi->dev, indio_dev); } static const struct of_device_id mcp3911_dt_ids[] = { @@ -367,7 +543,6 @@ static struct spi_driver mcp3911_driver = { .of_match_table = mcp3911_dt_ids, }, .probe = mcp3911_probe, - .remove = mcp3911_remove, .id_table = mcp3911_id, }; module_spi_driver(mcp3911_driver); diff --git a/drivers/iio/adc/mt6360-adc.c b/drivers/iio/adc/mt6360-adc.c index 35260d9e4e47..3710473e526f 100644 --- a/drivers/iio/adc/mt6360-adc.c +++ b/drivers/iio/adc/mt6360-adc.c @@ -353,7 +353,7 @@ static int mt6360_adc_probe(struct platform_device *pdev) return devm_iio_device_register(&pdev->dev, indio_dev); } -static const struct of_device_id __maybe_unused mt6360_adc_of_id[] = { +static const struct of_device_id mt6360_adc_of_id[] = { { .compatible = "mediatek,mt6360-adc", }, {} }; diff --git a/drivers/iio/adc/qcom-pm8xxx-xoadc.c b/drivers/iio/adc/qcom-pm8xxx-xoadc.c index 5e9e56821075..eb424496ee1d 100644 --- a/drivers/iio/adc/qcom-pm8xxx-xoadc.c +++ b/drivers/iio/adc/qcom-pm8xxx-xoadc.c @@ -14,9 +14,9 @@ #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> #include <linux/module.h> -#include <linux/of.h> -#include <linux/of_device.h> +#include <linux/mod_devicetable.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/regmap.h> #include <linux/init.h> #include <linux/interrupt.h> @@ -694,8 +694,8 @@ static int pm8xxx_read_raw(struct iio_dev *indio_dev, } } -static int pm8xxx_of_xlate(struct iio_dev *indio_dev, - const struct of_phandle_args *iiospec) +static int pm8xxx_fwnode_xlate(struct iio_dev *indio_dev, + const struct fwnode_reference_args *iiospec) { struct pm8xxx_xoadc *adc = iio_priv(indio_dev); u8 pre_scale_mux; @@ -706,10 +706,10 @@ static int pm8xxx_of_xlate(struct iio_dev *indio_dev, * First cell is prescaler or premux, second cell is analog * mux. */ - if (iiospec->args_count != 2) { - dev_err(&indio_dev->dev, "wrong number of arguments for %pOFn need 2 got %d\n", - iiospec->np, - iiospec->args_count); + if (iiospec->nargs != 2) { + dev_err(&indio_dev->dev, "wrong number of arguments for %pfwP need 2 got %d\n", + iiospec->fwnode, + iiospec->nargs); return -EINVAL; } pre_scale_mux = (u8)iiospec->args[0]; @@ -727,34 +727,34 @@ static int pm8xxx_of_xlate(struct iio_dev *indio_dev, } static const struct iio_info pm8xxx_xoadc_info = { - .of_xlate = pm8xxx_of_xlate, + .fwnode_xlate = pm8xxx_fwnode_xlate, .read_raw = pm8xxx_read_raw, }; static int pm8xxx_xoadc_parse_channel(struct device *dev, - struct device_node *np, + struct fwnode_handle *fwnode, const struct xoadc_channel *hw_channels, struct iio_chan_spec *iio_chan, struct pm8xxx_chan_info *ch) { - const char *name = np->name; + const char *name = fwnode_get_name(fwnode); const struct xoadc_channel *hwchan; - u32 pre_scale_mux, amux_channel; + u32 pre_scale_mux, amux_channel, reg[2]; u32 rsv, dec; int ret; int chid; - ret = of_property_read_u32_index(np, "reg", 0, &pre_scale_mux); + ret = fwnode_property_read_u32_array(fwnode, "reg", reg, + ARRAY_SIZE(reg)); if (ret) { - dev_err(dev, "invalid pre scale/mux number %s\n", name); - return ret; - } - ret = of_property_read_u32_index(np, "reg", 1, &amux_channel); - if (ret) { - dev_err(dev, "invalid amux channel number %s\n", name); + dev_err(dev, "invalid pre scale/mux or amux channel number %s\n", + name); return ret; } + pre_scale_mux = reg[0]; + amux_channel = reg[1]; + /* Find the right channel setting */ chid = 0; hwchan = &hw_channels[0]; @@ -778,7 +778,7 @@ static int pm8xxx_xoadc_parse_channel(struct device *dev, /* Everyone seems to use default ("type 2") decimation */ ch->decimation = VADC_DEF_DECIMATION; - if (!of_property_read_u32(np, "qcom,ratiometric", &rsv)) { + if (!fwnode_property_read_u32(fwnode, "qcom,ratiometric", &rsv)) { ch->calibration = VADC_CALIB_RATIOMETRIC; if (rsv > XOADC_RSV_MAX) { dev_err(dev, "%s too large RSV value %d\n", name, rsv); @@ -791,7 +791,7 @@ static int pm8xxx_xoadc_parse_channel(struct device *dev, } /* Optional decimation, if omitted we use the default */ - ret = of_property_read_u32(np, "qcom,decimation", &dec); + ret = fwnode_property_read_u32(fwnode, "qcom,decimation", &dec); if (!ret) { ret = qcom_vadc_decimation_from_dt(dec); if (ret < 0) { @@ -820,15 +820,14 @@ static int pm8xxx_xoadc_parse_channel(struct device *dev, return 0; } -static int pm8xxx_xoadc_parse_channels(struct pm8xxx_xoadc *adc, - struct device_node *np) +static int pm8xxx_xoadc_parse_channels(struct pm8xxx_xoadc *adc) { - struct device_node *child; + struct fwnode_handle *child; struct pm8xxx_chan_info *ch; int ret; int i; - adc->nchans = of_get_available_child_count(np); + adc->nchans = device_get_child_node_count(adc->dev); if (!adc->nchans) { dev_err(adc->dev, "no channel children\n"); return -ENODEV; @@ -846,14 +845,14 @@ static int pm8xxx_xoadc_parse_channels(struct pm8xxx_xoadc *adc, return -ENOMEM; i = 0; - for_each_available_child_of_node(np, child) { + device_for_each_child_node(adc->dev, child) { ch = &adc->chans[i]; ret = pm8xxx_xoadc_parse_channel(adc->dev, child, adc->variant->channels, &adc->iio_chans[i], ch); if (ret) { - of_node_put(child); + fwnode_handle_put(child); return ret; } i++; @@ -884,12 +883,11 @@ static int pm8xxx_xoadc_probe(struct platform_device *pdev) const struct xoadc_variant *variant; struct pm8xxx_xoadc *adc; struct iio_dev *indio_dev; - struct device_node *np = pdev->dev.of_node; struct regmap *map; struct device *dev = &pdev->dev; int ret; - variant = of_device_get_match_data(dev); + variant = device_get_match_data(dev); if (!variant) return -ENODEV; @@ -904,7 +902,7 @@ static int pm8xxx_xoadc_probe(struct platform_device *pdev) init_completion(&adc->complete); mutex_init(&adc->lock); - ret = pm8xxx_xoadc_parse_channels(adc, np); + ret = pm8xxx_xoadc_parse_channels(adc); if (ret) return ret; diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c index 87438d1e5c0b..821fee60a765 100644 --- a/drivers/iio/adc/qcom-spmi-adc5.c +++ b/drivers/iio/adc/qcom-spmi-adc5.c @@ -14,9 +14,9 @@ #include <linux/log2.h> #include <linux/math64.h> #include <linux/module.h> -#include <linux/of.h> -#include <linux/of_device.h> +#include <linux/mod_devicetable.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/regmap.h> #include <linux/slab.h> @@ -403,8 +403,8 @@ static irqreturn_t adc5_isr(int irq, void *dev_id) return IRQ_HANDLED; } -static int adc5_of_xlate(struct iio_dev *indio_dev, - const struct of_phandle_args *iiospec) +static int adc5_fwnode_xlate(struct iio_dev *indio_dev, + const struct fwnode_reference_args *iiospec) { struct adc5_chip *adc = iio_priv(indio_dev); int i; @@ -416,8 +416,8 @@ static int adc5_of_xlate(struct iio_dev *indio_dev, return -EINVAL; } -static int adc7_of_xlate(struct iio_dev *indio_dev, - const struct of_phandle_args *iiospec) +static int adc7_fwnode_xlate(struct iio_dev *indio_dev, + const struct fwnode_reference_args *iiospec) { struct adc5_chip *adc = iio_priv(indio_dev); int i, v_channel; @@ -481,12 +481,12 @@ static int adc7_read_raw(struct iio_dev *indio_dev, static const struct iio_info adc5_info = { .read_raw = adc5_read_raw, - .of_xlate = adc5_of_xlate, + .fwnode_xlate = adc5_fwnode_xlate, }; static const struct iio_info adc7_info = { .read_raw = adc7_read_raw, - .of_xlate = adc7_of_xlate, + .fwnode_xlate = adc7_fwnode_xlate, }; struct adc5_channels { @@ -526,6 +526,8 @@ static const struct adc5_channels adc5_chans_pmic[ADC5_MAX_CHANNEL] = { SCALE_HW_CALIB_DEFAULT) [ADC5_VBAT_SNS] = ADC5_CHAN_VOLT("vbat_sns", 1, SCALE_HW_CALIB_DEFAULT) + [ADC5_VCOIN] = ADC5_CHAN_VOLT("vcoin", 1, + SCALE_HW_CALIB_DEFAULT) [ADC5_DIE_TEMP] = ADC5_CHAN_TEMP("die_temp", 0, SCALE_HW_CALIB_PMIC_THERM) [ADC5_USB_IN_I] = ADC5_CHAN_VOLT("usb_in_i_uv", 0, @@ -549,6 +551,12 @@ static const struct adc5_channels adc5_chans_pmic[ADC5_MAX_CHANNEL] = { SCALE_HW_CALIB_THERM_100K_PULLUP) [ADC5_AMUX_THM2] = ADC5_CHAN_TEMP("amux_thm2", 0, SCALE_HW_CALIB_PM5_SMB_TEMP) + [ADC5_GPIO1_100K_PU] = ADC5_CHAN_TEMP("gpio1_100k_pu", 0, + SCALE_HW_CALIB_THERM_100K_PULLUP) + [ADC5_GPIO3_100K_PU] = ADC5_CHAN_TEMP("gpio3_100k_pu", 0, + SCALE_HW_CALIB_THERM_100K_PULLUP) + [ADC5_GPIO4_100K_PU] = ADC5_CHAN_TEMP("gpio4_100k_pu", 0, + SCALE_HW_CALIB_THERM_100K_PULLUP) }; static const struct adc5_channels adc7_chans_pmic[ADC5_MAX_CHANNEL] = { @@ -589,6 +597,8 @@ static const struct adc5_channels adc5_chans_rev2[ADC5_MAX_CHANNEL] = { SCALE_HW_CALIB_DEFAULT) [ADC5_1P25VREF] = ADC5_CHAN_VOLT("vref_1p25", 0, SCALE_HW_CALIB_DEFAULT) + [ADC5_VREF_VADC] = ADC5_CHAN_VOLT("vref_vadc", 0, + SCALE_HW_CALIB_DEFAULT) [ADC5_VPH_PWR] = ADC5_CHAN_VOLT("vph_pwr", 1, SCALE_HW_CALIB_DEFAULT) [ADC5_VBAT_SNS] = ADC5_CHAN_VOLT("vbat_sns", 1, @@ -611,18 +621,18 @@ static const struct adc5_channels adc5_chans_rev2[ADC5_MAX_CHANNEL] = { SCALE_HW_CALIB_THERM_100K_PULLUP) }; -static int adc5_get_dt_channel_data(struct adc5_chip *adc, +static int adc5_get_fw_channel_data(struct adc5_chip *adc, struct adc5_channel_prop *prop, - struct device_node *node, + struct fwnode_handle *fwnode, const struct adc5_data *data) { - const char *name = node->name, *channel_name; + const char *name = fwnode_get_name(fwnode), *channel_name; u32 chan, value, varr[2]; u32 sid = 0; int ret; struct device *dev = adc->dev; - ret = of_property_read_u32(node, "reg", &chan); + ret = fwnode_property_read_u32(fwnode, "reg", &chan); if (ret) { dev_err(dev, "invalid channel number %s\n", name); return ret; @@ -647,15 +657,13 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc, prop->channel = chan; prop->sid = sid; - channel_name = of_get_property(node, - "label", NULL) ? : node->name; - if (!channel_name) { - dev_err(dev, "Invalid channel name\n"); - return -EINVAL; - } + ret = fwnode_property_read_string(fwnode, "label", &channel_name); + if (ret) + channel_name = name; + prop->datasheet_name = channel_name; - ret = of_property_read_u32(node, "qcom,decimation", &value); + ret = fwnode_property_read_u32(fwnode, "qcom,decimation", &value); if (!ret) { ret = qcom_adc5_decimation_from_dt(value, data->decimation); if (ret < 0) { @@ -668,7 +676,7 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc, prop->decimation = ADC5_DECIMATION_DEFAULT; } - ret = of_property_read_u32_array(node, "qcom,pre-scaling", varr, 2); + ret = fwnode_property_read_u32_array(fwnode, "qcom,pre-scaling", varr, 2); if (!ret) { ret = qcom_adc5_prescaling_from_dt(varr[0], varr[1]); if (ret < 0) { @@ -682,7 +690,7 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc, adc->data->adc_chans[prop->channel].prescale_index; } - ret = of_property_read_u32(node, "qcom,hw-settle-time", &value); + ret = fwnode_property_read_u32(fwnode, "qcom,hw-settle-time", &value); if (!ret) { u8 dig_version[2]; @@ -713,7 +721,7 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc, prop->hw_settle_time = VADC_DEF_HW_SETTLE_TIME; } - ret = of_property_read_u32(node, "qcom,avg-samples", &value); + ret = fwnode_property_read_u32(fwnode, "qcom,avg-samples", &value); if (!ret) { ret = qcom_adc5_avg_samples_from_dt(value); if (ret < 0) { @@ -726,7 +734,7 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc, prop->avg_samples = VADC_DEF_AVG_SAMPLES; } - if (of_property_read_bool(node, "qcom,ratiometric")) + if (fwnode_property_read_bool(fwnode, "qcom,ratiometric")) prop->cal_method = ADC5_RATIOMETRIC_CAL; else prop->cal_method = ADC5_ABSOLUTE_CAL; @@ -801,16 +809,16 @@ static const struct of_device_id adc5_match_table[] = { }; MODULE_DEVICE_TABLE(of, adc5_match_table); -static int adc5_get_dt_data(struct adc5_chip *adc, struct device_node *node) +static int adc5_get_fw_data(struct adc5_chip *adc) { const struct adc5_channels *adc_chan; struct iio_chan_spec *iio_chan; struct adc5_channel_prop prop, *chan_props; - struct device_node *child; + struct fwnode_handle *child; unsigned int index = 0; int ret; - adc->nchannels = of_get_available_child_count(node); + adc->nchannels = device_get_child_node_count(adc->dev); if (!adc->nchannels) return -EINVAL; @@ -826,14 +834,14 @@ static int adc5_get_dt_data(struct adc5_chip *adc, struct device_node *node) chan_props = adc->chan_props; iio_chan = adc->iio_chans; - adc->data = of_device_get_match_data(adc->dev); + adc->data = device_get_match_data(adc->dev); if (!adc->data) adc->data = &adc5_data_pmic; - for_each_available_child_of_node(node, child) { - ret = adc5_get_dt_channel_data(adc, &prop, child, adc->data); + device_for_each_child_node(adc->dev, child) { + ret = adc5_get_fw_channel_data(adc, &prop, child, adc->data); if (ret) { - of_node_put(child); + fwnode_handle_put(child); return ret; } @@ -858,7 +866,6 @@ static int adc5_get_dt_data(struct adc5_chip *adc, struct device_node *node) static int adc5_probe(struct platform_device *pdev) { - struct device_node *node = pdev->dev.of_node; struct device *dev = &pdev->dev; struct iio_dev *indio_dev; struct adc5_chip *adc; @@ -870,7 +877,7 @@ static int adc5_probe(struct platform_device *pdev) if (!regmap) return -ENODEV; - ret = of_property_read_u32(node, "reg", ®); + ret = device_property_read_u32(dev, "reg", ®); if (ret < 0) return ret; @@ -886,7 +893,7 @@ static int adc5_probe(struct platform_device *pdev) init_completion(&adc->complete); mutex_init(&adc->lock); - ret = adc5_get_dt_data(adc, node); + ret = adc5_get_fw_data(adc); if (ret) { dev_err(dev, "adc get dt data failed\n"); return ret; diff --git a/drivers/iio/adc/qcom-spmi-vadc.c b/drivers/iio/adc/qcom-spmi-vadc.c index 34202ba52469..bcff0f62b70e 100644 --- a/drivers/iio/adc/qcom-spmi-vadc.c +++ b/drivers/iio/adc/qcom-spmi-vadc.c @@ -13,8 +13,9 @@ #include <linux/kernel.h> #include <linux/math64.h> #include <linux/module.h> -#include <linux/of.h> +#include <linux/mod_devicetable.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/regmap.h> #include <linux/slab.h> #include <linux/log2.h> @@ -481,8 +482,8 @@ static int vadc_read_raw(struct iio_dev *indio_dev, return ret; } -static int vadc_of_xlate(struct iio_dev *indio_dev, - const struct of_phandle_args *iiospec) +static int vadc_fwnode_xlate(struct iio_dev *indio_dev, + const struct fwnode_reference_args *iiospec) { struct vadc_priv *vadc = iio_priv(indio_dev); unsigned int i; @@ -496,7 +497,7 @@ static int vadc_of_xlate(struct iio_dev *indio_dev, static const struct iio_info vadc_info = { .read_raw = vadc_read_raw, - .of_xlate = vadc_of_xlate, + .fwnode_xlate = vadc_fwnode_xlate, }; struct vadc_channels { @@ -647,15 +648,15 @@ static const struct vadc_channels vadc_chans[] = { VADC_CHAN_NO_SCALE(LR_MUX3_BUF_PU1_PU2_XO_THERM, 0) }; -static int vadc_get_dt_channel_data(struct device *dev, +static int vadc_get_fw_channel_data(struct device *dev, struct vadc_channel_prop *prop, - struct device_node *node) + struct fwnode_handle *fwnode) { - const char *name = node->name; + const char *name = fwnode_get_name(fwnode); u32 chan, value, varr[2]; int ret; - ret = of_property_read_u32(node, "reg", &chan); + ret = fwnode_property_read_u32(fwnode, "reg", &chan); if (ret) { dev_err(dev, "invalid channel number %s\n", name); return ret; @@ -669,7 +670,7 @@ static int vadc_get_dt_channel_data(struct device *dev, /* the channel has DT description */ prop->channel = chan; - ret = of_property_read_u32(node, "qcom,decimation", &value); + ret = fwnode_property_read_u32(fwnode, "qcom,decimation", &value); if (!ret) { ret = qcom_vadc_decimation_from_dt(value); if (ret < 0) { @@ -682,7 +683,7 @@ static int vadc_get_dt_channel_data(struct device *dev, prop->decimation = VADC_DEF_DECIMATION; } - ret = of_property_read_u32_array(node, "qcom,pre-scaling", varr, 2); + ret = fwnode_property_read_u32_array(fwnode, "qcom,pre-scaling", varr, 2); if (!ret) { ret = vadc_prescaling_from_dt(varr[0], varr[1]); if (ret < 0) { @@ -695,7 +696,7 @@ static int vadc_get_dt_channel_data(struct device *dev, prop->prescale = vadc_chans[prop->channel].prescale_index; } - ret = of_property_read_u32(node, "qcom,hw-settle-time", &value); + ret = fwnode_property_read_u32(fwnode, "qcom,hw-settle-time", &value); if (!ret) { ret = vadc_hw_settle_time_from_dt(value); if (ret < 0) { @@ -708,7 +709,7 @@ static int vadc_get_dt_channel_data(struct device *dev, prop->hw_settle_time = VADC_DEF_HW_SETTLE_TIME; } - ret = of_property_read_u32(node, "qcom,avg-samples", &value); + ret = fwnode_property_read_u32(fwnode, "qcom,avg-samples", &value); if (!ret) { ret = vadc_avg_samples_from_dt(value); if (ret < 0) { @@ -721,7 +722,7 @@ static int vadc_get_dt_channel_data(struct device *dev, prop->avg_samples = VADC_DEF_AVG_SAMPLES; } - if (of_property_read_bool(node, "qcom,ratiometric")) + if (fwnode_property_read_bool(fwnode, "qcom,ratiometric")) prop->calibration = VADC_CALIB_RATIOMETRIC; else prop->calibration = VADC_CALIB_ABSOLUTE; @@ -731,16 +732,16 @@ static int vadc_get_dt_channel_data(struct device *dev, return 0; } -static int vadc_get_dt_data(struct vadc_priv *vadc, struct device_node *node) +static int vadc_get_fw_data(struct vadc_priv *vadc) { const struct vadc_channels *vadc_chan; struct iio_chan_spec *iio_chan; struct vadc_channel_prop prop; - struct device_node *child; + struct fwnode_handle *child; unsigned int index = 0; int ret; - vadc->nchannels = of_get_available_child_count(node); + vadc->nchannels = device_get_child_node_count(vadc->dev); if (!vadc->nchannels) return -EINVAL; @@ -756,10 +757,10 @@ static int vadc_get_dt_data(struct vadc_priv *vadc, struct device_node *node) iio_chan = vadc->iio_chans; - for_each_available_child_of_node(node, child) { - ret = vadc_get_dt_channel_data(vadc->dev, &prop, child); + device_for_each_child_node(vadc->dev, child) { + ret = vadc_get_fw_channel_data(vadc->dev, &prop, child); if (ret) { - of_node_put(child); + fwnode_handle_put(child); return ret; } @@ -848,7 +849,6 @@ static int vadc_check_revision(struct vadc_priv *vadc) static int vadc_probe(struct platform_device *pdev) { - struct device_node *node = pdev->dev.of_node; struct device *dev = &pdev->dev; struct iio_dev *indio_dev; struct vadc_priv *vadc; @@ -860,7 +860,7 @@ static int vadc_probe(struct platform_device *pdev) if (!regmap) return -ENODEV; - ret = of_property_read_u32(node, "reg", ®); + ret = device_property_read_u32(dev, "reg", ®); if (ret < 0) return ret; @@ -880,7 +880,7 @@ static int vadc_probe(struct platform_device *pdev) if (ret) return ret; - ret = vadc_get_dt_data(vadc, node); + ret = vadc_get_fw_data(vadc); if (ret) return ret; diff --git a/drivers/iio/adc/rtq6056.c b/drivers/iio/adc/rtq6056.c new file mode 100644 index 000000000000..c1b2e8dc9a26 --- /dev/null +++ b/drivers/iio/adc/rtq6056.c @@ -0,0 +1,661 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022 Richtek Technology Corp. + * + * ChiYuan Huang <cy_huang@richtek.com> + */ + +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/pm_runtime.h> +#include <linux/property.h> +#include <linux/regmap.h> +#include <linux/sysfs.h> +#include <linux/types.h> +#include <linux/util_macros.h> + +#include <linux/iio/buffer.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> + +#define RTQ6056_REG_CONFIG 0x00 +#define RTQ6056_REG_SHUNTVOLT 0x01 +#define RTQ6056_REG_BUSVOLT 0x02 +#define RTQ6056_REG_POWER 0x03 +#define RTQ6056_REG_CURRENT 0x04 +#define RTQ6056_REG_CALIBRATION 0x05 +#define RTQ6056_REG_MASKENABLE 0x06 +#define RTQ6056_REG_ALERTLIMIT 0x07 +#define RTQ6056_REG_MANUFACTID 0xFE +#define RTQ6056_REG_DIEID 0xFF + +#define RTQ6056_VENDOR_ID 0x1214 +#define RTQ6056_DEFAULT_CONFIG 0x4127 +#define RTQ6056_CONT_ALLON 7 + +enum { + RTQ6056_CH_VSHUNT = 0, + RTQ6056_CH_VBUS, + RTQ6056_CH_POWER, + RTQ6056_CH_CURRENT, + RTQ6056_MAX_CHANNEL +}; + +enum { + F_OPMODE = 0, + F_VSHUNTCT, + F_VBUSCT, + F_AVG, + F_RESET, + F_MAX_FIELDS +}; + +struct rtq6056_priv { + struct device *dev; + struct regmap *regmap; + struct regmap_field *rm_fields[F_MAX_FIELDS]; + u32 shunt_resistor_uohm; + int vshuntct_us; + int vbusct_us; + int avg_sample; +}; + +static const struct reg_field rtq6056_reg_fields[F_MAX_FIELDS] = { + [F_OPMODE] = REG_FIELD(RTQ6056_REG_CONFIG, 0, 2), + [F_VSHUNTCT] = REG_FIELD(RTQ6056_REG_CONFIG, 3, 5), + [F_VBUSCT] = REG_FIELD(RTQ6056_REG_CONFIG, 6, 8), + [F_AVG] = REG_FIELD(RTQ6056_REG_CONFIG, 9, 11), + [F_RESET] = REG_FIELD(RTQ6056_REG_CONFIG, 15, 15), +}; + +static const struct iio_chan_spec rtq6056_channels[RTQ6056_MAX_CHANNEL + 1] = { + { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = 0, + .address = RTQ6056_REG_SHUNTVOLT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_separate_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .scan_index = 0, + .scan_type = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, + }, + { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = 1, + .address = RTQ6056_REG_BUSVOLT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_separate_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .scan_index = 1, + .scan_type = { + .sign = 'u', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, + }, + { + .type = IIO_POWER, + .indexed = 1, + .channel = 2, + .address = RTQ6056_REG_POWER, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .scan_index = 2, + .scan_type = { + .sign = 'u', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, + }, + { + .type = IIO_CURRENT, + .indexed = 1, + .channel = 3, + .address = RTQ6056_REG_CURRENT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .scan_index = 3, + .scan_type = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, + }, + IIO_CHAN_SOFT_TIMESTAMP(RTQ6056_MAX_CHANNEL), +}; + +static int rtq6056_adc_read_channel(struct rtq6056_priv *priv, + struct iio_chan_spec const *ch, + int *val) +{ + struct device *dev = priv->dev; + unsigned int addr = ch->address; + unsigned int regval; + int ret; + + pm_runtime_get_sync(dev); + ret = regmap_read(priv->regmap, addr, ®val); + pm_runtime_mark_last_busy(dev); + pm_runtime_put(dev); + if (ret) + return ret; + + /* Power and VBUS is unsigned 16-bit, others are signed 16-bit */ + if (addr == RTQ6056_REG_BUSVOLT || addr == RTQ6056_REG_POWER) + *val = regval; + else + *val = sign_extend32(regval, 16); + + return IIO_VAL_INT; +} + +static int rtq6056_adc_read_scale(struct iio_chan_spec const *ch, int *val, + int *val2) +{ + switch (ch->address) { + case RTQ6056_REG_SHUNTVOLT: + /* VSHUNT lsb 2.5uV */ + *val = 2500; + *val2 = 1000000; + return IIO_VAL_FRACTIONAL; + case RTQ6056_REG_BUSVOLT: + /* VBUS lsb 1.25mV */ + *val = 1250; + *val2 = 1000; + return IIO_VAL_FRACTIONAL; + case RTQ6056_REG_POWER: + /* Power lsb 25mW */ + *val = 25; + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +/* + * Sample frequency for channel VSHUNT and VBUS. The indices correspond + * with the bit value expected by the chip. And it can be found at + * https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf + */ +static const int rtq6056_samp_freq_list[] = { + 7194, 4926, 3717, 1904, 964, 485, 243, 122, +}; + +static int rtq6056_adc_set_samp_freq(struct rtq6056_priv *priv, + struct iio_chan_spec const *ch, int val) +{ + struct regmap_field *rm_field; + unsigned int selector; + int *ct, ret; + + if (val > 7194 || val < 122) + return -EINVAL; + + if (ch->address == RTQ6056_REG_SHUNTVOLT) { + rm_field = priv->rm_fields[F_VSHUNTCT]; + ct = &priv->vshuntct_us; + } else if (ch->address == RTQ6056_REG_BUSVOLT) { + rm_field = priv->rm_fields[F_VBUSCT]; + ct = &priv->vbusct_us; + } else + return -EINVAL; + + selector = find_closest_descending(val, rtq6056_samp_freq_list, + ARRAY_SIZE(rtq6056_samp_freq_list)); + + ret = regmap_field_write(rm_field, selector); + if (ret) + return ret; + + *ct = 1000000 / rtq6056_samp_freq_list[selector]; + + return 0; +} + +/* + * Available averaging rate for rtq6056. The indices correspond with the bit + * value expected by the chip. And it can be found at + * https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf + */ +static const int rtq6056_avg_sample_list[] = { + 1, 4, 16, 64, 128, 256, 512, 1024, +}; + +static int rtq6056_adc_set_average(struct rtq6056_priv *priv, int val) +{ + unsigned int selector; + int ret; + + if (val > 1024 || val < 1) + return -EINVAL; + + selector = find_closest(val, rtq6056_avg_sample_list, + ARRAY_SIZE(rtq6056_avg_sample_list)); + + ret = regmap_field_write(priv->rm_fields[F_AVG], selector); + if (ret) + return ret; + + priv->avg_sample = rtq6056_avg_sample_list[selector]; + + return 0; +} + +static int rtq6056_adc_get_sample_freq(struct rtq6056_priv *priv, + struct iio_chan_spec const *ch, int *val) +{ + int sample_time; + + if (ch->address == RTQ6056_REG_SHUNTVOLT) + sample_time = priv->vshuntct_us; + else if (ch->address == RTQ6056_REG_BUSVOLT) + sample_time = priv->vbusct_us; + else { + sample_time = priv->vshuntct_us + priv->vbusct_us; + sample_time *= priv->avg_sample; + } + + *val = 1000000 / sample_time; + + return IIO_VAL_INT; +} + +static int rtq6056_adc_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct rtq6056_priv *priv = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + return rtq6056_adc_read_channel(priv, chan, val); + case IIO_CHAN_INFO_SCALE: + return rtq6056_adc_read_scale(chan, val, val2); + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + *val = priv->avg_sample; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SAMP_FREQ: + return rtq6056_adc_get_sample_freq(priv, chan, val); + default: + return -EINVAL; + } +} + +static int rtq6056_adc_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + *vals = rtq6056_samp_freq_list; + *type = IIO_VAL_INT; + *length = ARRAY_SIZE(rtq6056_samp_freq_list); + return IIO_AVAIL_LIST; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + *vals = rtq6056_avg_sample_list; + *type = IIO_VAL_INT; + *length = ARRAY_SIZE(rtq6056_avg_sample_list); + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } +} + +static int rtq6056_adc_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, + int val2, long mask) +{ + struct rtq6056_priv *priv = iio_priv(indio_dev); + int ret; + + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + ret = rtq6056_adc_set_samp_freq(priv, chan, val); + break; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + ret = rtq6056_adc_set_average(priv, val); + break; + default: + ret = -EINVAL; + break; + } + + iio_device_release_direct_mode(indio_dev); + + return ret; +} + +static const char *rtq6056_channel_labels[RTQ6056_MAX_CHANNEL] = { + [RTQ6056_CH_VSHUNT] = "Vshunt", + [RTQ6056_CH_VBUS] = "Vbus", + [RTQ6056_CH_POWER] = "Power", + [RTQ6056_CH_CURRENT] = "Current", +}; + +static int rtq6056_adc_read_label(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + char *label) +{ + return sysfs_emit(label, "%s\n", rtq6056_channel_labels[chan->channel]); +} + +static int rtq6056_set_shunt_resistor(struct rtq6056_priv *priv, + int resistor_uohm) +{ + unsigned int calib_val; + int ret; + + if (resistor_uohm <= 0) { + dev_err(priv->dev, "Invalid resistor [%d]\n", resistor_uohm); + return -EINVAL; + } + + /* calibration = 5120000 / (Rshunt (uOhm) * current lsb (1mA)) */ + calib_val = 5120000 / resistor_uohm; + ret = regmap_write(priv->regmap, RTQ6056_REG_CALIBRATION, calib_val); + if (ret) + return ret; + + priv->shunt_resistor_uohm = resistor_uohm; + + return 0; +} + +static ssize_t shunt_resistor_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct rtq6056_priv *priv = iio_priv(dev_to_iio_dev(dev)); + int vals[2] = { priv->shunt_resistor_uohm, 1000000 }; + + return iio_format_value(buf, IIO_VAL_FRACTIONAL, 1, vals); +} + +static ssize_t shunt_resistor_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct rtq6056_priv *priv = iio_priv(indio_dev); + int val, val_fract, ret; + + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + ret = iio_str_to_fixpoint(buf, 100000, &val, &val_fract); + if (ret) + goto out_store; + + ret = rtq6056_set_shunt_resistor(priv, val * 1000000 + val_fract); + +out_store: + iio_device_release_direct_mode(indio_dev); + + return ret ?: len; +} + +static IIO_DEVICE_ATTR_RW(shunt_resistor, 0); + +static struct attribute *rtq6056_attributes[] = { + &iio_dev_attr_shunt_resistor.dev_attr.attr, + NULL +}; + +static const struct attribute_group rtq6056_attribute_group = { + .attrs = rtq6056_attributes, +}; + +static const struct iio_info rtq6056_info = { + .attrs = &rtq6056_attribute_group, + .read_raw = rtq6056_adc_read_raw, + .read_avail = rtq6056_adc_read_avail, + .write_raw = rtq6056_adc_write_raw, + .read_label = rtq6056_adc_read_label, +}; + +static irqreturn_t rtq6056_buffer_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct rtq6056_priv *priv = iio_priv(indio_dev); + struct device *dev = priv->dev; + struct { + u16 vals[RTQ6056_MAX_CHANNEL]; + s64 timestamp __aligned(8); + } data; + unsigned int raw; + int i = 0, bit, ret; + + memset(&data, 0, sizeof(data)); + + pm_runtime_get_sync(dev); + + for_each_set_bit(bit, indio_dev->active_scan_mask, indio_dev->masklength) { + unsigned int addr = rtq6056_channels[bit].address; + + ret = regmap_read(priv->regmap, addr, &raw); + if (ret) + goto out; + + data.vals[i++] = raw; + } + + iio_push_to_buffers_with_timestamp(indio_dev, &data, iio_get_time_ns(indio_dev)); + +out: + pm_runtime_mark_last_busy(dev); + pm_runtime_put(dev); + + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static void rtq6056_enter_shutdown_state(void *dev) +{ + struct rtq6056_priv *priv = dev_get_drvdata(dev); + + /* Enter shutdown state */ + regmap_field_write(priv->rm_fields[F_OPMODE], 0); +} + +static bool rtq6056_is_readable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case RTQ6056_REG_CONFIG ... RTQ6056_REG_ALERTLIMIT: + case RTQ6056_REG_MANUFACTID ... RTQ6056_REG_DIEID: + return true; + default: + return false; + } +} + +static bool rtq6056_is_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case RTQ6056_REG_CONFIG: + case RTQ6056_REG_CALIBRATION ... RTQ6056_REG_ALERTLIMIT: + return true; + default: + return false; + } +} + +static const struct regmap_config rtq6056_regmap_config = { + .reg_bits = 8, + .val_bits = 16, + .val_format_endian = REGMAP_ENDIAN_BIG, + .max_register = RTQ6056_REG_DIEID, + .readable_reg = rtq6056_is_readable_reg, + .writeable_reg = rtq6056_is_writeable_reg, +}; + +static int rtq6056_probe(struct i2c_client *i2c) +{ + struct iio_dev *indio_dev; + struct rtq6056_priv *priv; + struct device *dev = &i2c->dev; + struct regmap *regmap; + unsigned int vendor_id, shunt_resistor_uohm; + int ret; + + if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_WORD_DATA)) + return -EOPNOTSUPP; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*priv)); + if (!indio_dev) + return -ENOMEM; + + priv = iio_priv(indio_dev); + priv->dev = dev; + priv->vshuntct_us = priv->vbusct_us = 1037; + priv->avg_sample = 1; + i2c_set_clientdata(i2c, priv); + + regmap = devm_regmap_init_i2c(i2c, &rtq6056_regmap_config); + if (IS_ERR(regmap)) + return dev_err_probe(dev, PTR_ERR(regmap), + "Failed to init regmap\n"); + + priv->regmap = regmap; + + ret = regmap_read(regmap, RTQ6056_REG_MANUFACTID, &vendor_id); + if (ret) + return dev_err_probe(dev, ret, + "Failed to get manufacturer info\n"); + + if (vendor_id != RTQ6056_VENDOR_ID) + return dev_err_probe(dev, -ENODEV, + "Invalid vendor id 0x%04x\n", vendor_id); + + ret = devm_regmap_field_bulk_alloc(dev, regmap, priv->rm_fields, + rtq6056_reg_fields, F_MAX_FIELDS); + if (ret) + return dev_err_probe(dev, ret, "Failed to init regmap field\n"); + + /* + * By default, configure average sample as 1, bus and shunt conversion + * time as 1037 microsecond, and operating mode to all on. + */ + ret = regmap_write(regmap, RTQ6056_REG_CONFIG, RTQ6056_DEFAULT_CONFIG); + if (ret) + return dev_err_probe(dev, ret, + "Failed to enable continuous sensing\n"); + + ret = devm_add_action_or_reset(dev, rtq6056_enter_shutdown_state, dev); + if (ret) + return ret; + + pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC); + pm_runtime_use_autosuspend(dev); + pm_runtime_set_active(dev); + pm_runtime_mark_last_busy(dev); + ret = devm_pm_runtime_enable(dev); + if (ret) + return dev_err_probe(dev, ret, "Failed to enable pm_runtime\n"); + + /* By default, use 2000 micro-Ohm resistor */ + shunt_resistor_uohm = 2000; + device_property_read_u32(dev, "shunt-resistor-micro-ohms", + &shunt_resistor_uohm); + + ret = rtq6056_set_shunt_resistor(priv, shunt_resistor_uohm); + if (ret) + return dev_err_probe(dev, ret, + "Failed to init shunt resistor\n"); + + indio_dev->name = "rtq6056"; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = rtq6056_channels; + indio_dev->num_channels = ARRAY_SIZE(rtq6056_channels); + indio_dev->info = &rtq6056_info; + + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, + rtq6056_buffer_trigger_handler, + NULL); + if (ret) + return dev_err_probe(dev, ret, + "Failed to allocate iio trigger buffer\n"); + + return devm_iio_device_register(dev, indio_dev); +} + +static int rtq6056_runtime_suspend(struct device *dev) +{ + struct rtq6056_priv *priv = dev_get_drvdata(dev); + + /* Configure to shutdown mode */ + return regmap_field_write(priv->rm_fields[F_OPMODE], 0); +} + +static int rtq6056_runtime_resume(struct device *dev) +{ + struct rtq6056_priv *priv = dev_get_drvdata(dev); + int sample_rdy_time_us, ret; + + ret = regmap_field_write(priv->rm_fields[F_OPMODE], RTQ6056_CONT_ALLON); + if (ret) + return ret; + + sample_rdy_time_us = priv->vbusct_us + priv->vshuntct_us; + sample_rdy_time_us *= priv->avg_sample; + + usleep_range(sample_rdy_time_us, sample_rdy_time_us + 100); + + return 0; +} + +static DEFINE_RUNTIME_DEV_PM_OPS(rtq6056_pm_ops, rtq6056_runtime_suspend, + rtq6056_runtime_resume, NULL); + +static const struct of_device_id rtq6056_device_match[] = { + { .compatible = "richtek,rtq6056" }, + {} +}; +MODULE_DEVICE_TABLE(of, rtq6056_device_match); + +static struct i2c_driver rtq6056_driver = { + .driver = { + .name = "rtq6056", + .of_match_table = rtq6056_device_match, + .pm = pm_ptr(&rtq6056_pm_ops), + }, + .probe_new = rtq6056_probe, +}; +module_i2c_driver(rtq6056_driver); + +MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>"); +MODULE_DESCRIPTION("Richtek RTQ6056 Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c index 1ce52af3fe8b..81d5db91c67b 100644 --- a/drivers/iio/adc/stm32-adc-core.c +++ b/drivers/iio/adc/stm32-adc-core.c @@ -9,6 +9,7 @@ * */ +#include <linux/bitfield.h> #include <linux/clk.h> #include <linux/interrupt.h> #include <linux/irqchip/chained_irq.h> @@ -62,6 +63,7 @@ struct stm32_adc_priv; * @regs: common registers for all instances * @clk_sel: clock selection routine * @max_clk_rate_hz: maximum analog clock rate (Hz, from datasheet) + * @ipid: adc identification number * @has_syscfg: SYSCFG capability flags * @num_irqs: number of interrupt lines * @num_adcs: maximum number of ADC instances in the common registers @@ -70,6 +72,7 @@ struct stm32_adc_priv_cfg { const struct stm32_adc_common_regs *regs; int (*clk_sel)(struct platform_device *, struct stm32_adc_priv *); u32 max_clk_rate_hz; + u32 ipid; unsigned int has_syscfg; unsigned int num_irqs; unsigned int num_adcs; @@ -78,6 +81,7 @@ struct stm32_adc_priv_cfg { /** * struct stm32_adc_priv - stm32 ADC core private data * @irq: irq(s) for ADC block + * @nb_adc_max: actual maximum number of instance per ADC block * @domain: irq domain reference * @aclk: clock reference for the analog circuitry * @bclk: bus clock common for all ADCs, depends on part used @@ -95,6 +99,7 @@ struct stm32_adc_priv_cfg { */ struct stm32_adc_priv { int irq[STM32_ADC_MAX_ADCS]; + unsigned int nb_adc_max; struct irq_domain *domain; struct clk *aclk; struct clk *bclk; @@ -354,7 +359,7 @@ static void stm32_adc_irq_handler(struct irq_desc *desc) * before invoking the interrupt handler (e.g. call ISR only for * IRQ-enabled ADCs). */ - for (i = 0; i < priv->cfg->num_adcs; i++) { + for (i = 0; i < priv->nb_adc_max; i++) { if ((status & priv->cfg->regs->eoc_msk[i] && stm32_adc_eoc_enabled(priv, i)) || (status & priv->cfg->regs->ovr_msk[i])) @@ -424,7 +429,7 @@ static void stm32_adc_irq_remove(struct platform_device *pdev, int hwirq; unsigned int i; - for (hwirq = 0; hwirq < STM32_ADC_MAX_ADCS; hwirq++) + for (hwirq = 0; hwirq < priv->nb_adc_max; hwirq++) irq_dispose_mapping(irq_find_mapping(priv->domain, hwirq)); irq_domain_remove(priv->domain); @@ -642,6 +647,49 @@ static int stm32_adc_core_switches_probe(struct device *dev, return 0; } +static int stm32_adc_probe_identification(struct platform_device *pdev, + struct stm32_adc_priv *priv) +{ + struct device_node *np = pdev->dev.of_node; + struct device_node *child; + const char *compat; + int ret, count = 0; + u32 id, val; + + if (!priv->cfg->ipid) + return 0; + + id = FIELD_GET(STM32MP1_IPIDR_MASK, + readl_relaxed(priv->common.base + STM32MP1_ADC_IPDR)); + if (id != priv->cfg->ipid) { + dev_err(&pdev->dev, "Unexpected IP version: 0x%x", id); + return -EINVAL; + } + + for_each_child_of_node(np, child) { + ret = of_property_read_string(child, "compatible", &compat); + if (ret) + continue; + /* Count child nodes with stm32 adc compatible */ + if (strstr(compat, "st,stm32") && strstr(compat, "adc")) + count++; + } + + val = readl_relaxed(priv->common.base + STM32MP1_ADC_HWCFGR0); + priv->nb_adc_max = FIELD_GET(STM32MP1_ADCNUM_MASK, val); + if (count > priv->nb_adc_max) { + dev_err(&pdev->dev, "Unexpected child number: %d", count); + return -EINVAL; + } + + val = readl_relaxed(priv->common.base + STM32MP1_ADC_VERR); + dev_dbg(&pdev->dev, "ADC version: %lu.%lu\n", + FIELD_GET(STM32MP1_MAJREV_MASK, val), + FIELD_GET(STM32MP1_MINREV_MASK, val)); + + return 0; +} + static int stm32_adc_probe(struct platform_device *pdev) { struct stm32_adc_priv *priv; @@ -661,6 +709,7 @@ static int stm32_adc_probe(struct platform_device *pdev) priv->cfg = (const struct stm32_adc_priv_cfg *) of_match_device(dev->driver->of_match_table, dev)->data; + priv->nb_adc_max = priv->cfg->num_adcs; spin_lock_init(&priv->common.lock); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -703,6 +752,10 @@ static int stm32_adc_probe(struct platform_device *pdev) if (ret) goto err_pm_stop; + ret = stm32_adc_probe_identification(pdev, priv); + if (ret < 0) + goto err_hw_stop; + ret = regulator_get_voltage(priv->vref); if (ret < 0) { dev_err(&pdev->dev, "vref get voltage failed, %d\n", ret); @@ -811,8 +864,8 @@ static const struct stm32_adc_priv_cfg stm32mp1_adc_priv_cfg = { .clk_sel = stm32h7_adc_clk_sel, .max_clk_rate_hz = 36000000, .has_syscfg = HAS_VBOOSTER | HAS_ANASWVDD, + .ipid = STM32MP15_IPIDR_NUMBER, .num_irqs = 2, - .num_adcs = 2, }; static const struct of_device_id stm32_adc_of_match[] = { diff --git a/drivers/iio/adc/stm32-adc-core.h b/drivers/iio/adc/stm32-adc-core.h index faedf7a49555..2118ef63843d 100644 --- a/drivers/iio/adc/stm32-adc-core.h +++ b/drivers/iio/adc/stm32-adc-core.h @@ -24,6 +24,7 @@ * | 0x300 | Master & Slave common regs | * -------------------------------------------------------- */ +/* Maximum ADC instances number per ADC block for all supported SoCs */ #define STM32_ADC_MAX_ADCS 3 #define STM32_ADC_OFFSET 0x100 #define STM32_ADCX_COMN_OFFSET 0x300 @@ -105,6 +106,12 @@ /* STM32MP1 - ADC2 instance option register */ #define STM32MP1_ADC2_OR 0xD0 +/* STM32MP1 - Identification registers */ +#define STM32MP1_ADC_HWCFGR0 0x3F0 +#define STM32MP1_ADC_VERR 0x3F4 +#define STM32MP1_ADC_IPDR 0x3F8 +#define STM32MP1_ADC_SIDR 0x3FC + /* STM32H7 - common registers for all ADC instances */ #define STM32H7_ADC_CSR (STM32_ADCX_COMN_OFFSET + 0x00) #define STM32H7_ADC_CCR (STM32_ADCX_COMN_OFFSET + 0x08) @@ -181,6 +188,30 @@ enum stm32h7_adc_dmngt { /* STM32MP1_ADC2_OR - bit fields */ #define STM32MP1_VDDCOREEN BIT(0) +/* STM32MP1_ADC_HWCFGR0 - bit fields */ +#define STM32MP1_ADCNUM_SHIFT 0 +#define STM32MP1_ADCNUM_MASK GENMASK(3, 0) +#define STM32MP1_MULPIPE_SHIFT 4 +#define STM32MP1_MULPIPE_MASK GENMASK(7, 4) +#define STM32MP1_OPBITS_SHIFT 8 +#define STM32MP1_OPBITS_MASK GENMASK(11, 8) +#define STM32MP1_IDLEVALUE_SHIFT 12 +#define STM32MP1_IDLEVALUE_MASK GENMASK(15, 12) + +/* STM32MP1_ADC_VERR - bit fields */ +#define STM32MP1_MINREV_SHIFT 0 +#define STM32MP1_MINREV_MASK GENMASK(3, 0) +#define STM32MP1_MAJREV_SHIFT 4 +#define STM32MP1_MAJREV_MASK GENMASK(7, 4) + +/* STM32MP1_ADC_IPDR - bit fields */ +#define STM32MP1_IPIDR_MASK GENMASK(31, 0) + +/* STM32MP1_ADC_SIDR - bit fields */ +#define STM32MP1_SIDR_MASK GENMASK(31, 0) + +#define STM32MP15_IPIDR_NUMBER 0x00110005 + /** * struct stm32_adc_common - stm32 ADC driver common data (for all instances) * @base: control registers base cpu addr diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c index 130e8dd6f0c8..6256977eb7f7 100644 --- a/drivers/iio/adc/stm32-adc.c +++ b/drivers/iio/adc/stm32-adc.c @@ -21,11 +21,11 @@ #include <linux/io.h> #include <linux/iopoll.h> #include <linux/module.h> +#include <linux/mod_devicetable.h> #include <linux/nvmem-consumer.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> -#include <linux/of.h> -#include <linux/of_device.h> +#include <linux/property.h> #include "stm32-adc-core.h" @@ -241,6 +241,7 @@ struct stm32_adc_cfg { * @chan_name: channel name array * @num_diff: number of differential channels * @int_ch: internal channel indexes array + * @nsmps: number of channels with optional sample time */ struct stm32_adc { struct stm32_adc_common *common; @@ -267,6 +268,7 @@ struct stm32_adc { char chan_name[STM32_ADC_CH_MAX][STM32_ADC_CH_SZ]; u32 num_diff; int int_ch[STM32_ADC_INT_CH_NB]; + int nsmps; }; struct stm32_adc_diff_channel { @@ -1520,8 +1522,8 @@ static int stm32_adc_update_scan_mode(struct iio_dev *indio_dev, return ret; } -static int stm32_adc_of_xlate(struct iio_dev *indio_dev, - const struct of_phandle_args *iiospec) +static int stm32_adc_fwnode_xlate(struct iio_dev *indio_dev, + const struct fwnode_reference_args *iiospec) { int i; @@ -1575,7 +1577,7 @@ static const struct iio_info stm32_adc_iio_info = { .hwfifo_set_watermark = stm32_adc_set_watermark, .update_scan_mode = stm32_adc_update_scan_mode, .debugfs_reg_access = stm32_adc_debugfs_reg_access, - .of_xlate = stm32_adc_of_xlate, + .fwnode_xlate = stm32_adc_fwnode_xlate, }; static unsigned int stm32_adc_dma_residue(struct stm32_adc *adc) @@ -1772,14 +1774,14 @@ static const struct iio_chan_spec_ext_info stm32_adc_ext_info[] = { {}, }; -static int stm32_adc_of_get_resolution(struct iio_dev *indio_dev) +static int stm32_adc_fw_get_resolution(struct iio_dev *indio_dev) { - struct device_node *node = indio_dev->dev.of_node; + struct device *dev = &indio_dev->dev; struct stm32_adc *adc = iio_priv(indio_dev); unsigned int i; u32 res; - if (of_property_read_u32(node, "assigned-resolution-bits", &res)) + if (device_property_read_u32(dev, "assigned-resolution-bits", &res)) res = adc->cfg->adc_info->resolutions[0]; for (i = 0; i < adc->cfg->adc_info->num_res; i++) @@ -1863,11 +1865,11 @@ static void stm32_adc_chan_init_one(struct iio_dev *indio_dev, static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm32_adc *adc) { - struct device_node *node = indio_dev->dev.of_node; + struct device *dev = &indio_dev->dev; const struct stm32_adc_info *adc_info = adc->cfg->adc_info; int num_channels = 0, ret; - ret = of_property_count_u32_elems(node, "st,adc-channels"); + ret = device_property_count_u32(dev, "st,adc-channels"); if (ret > adc_info->max_channels) { dev_err(&indio_dev->dev, "Bad st,adc-channels?\n"); return -EINVAL; @@ -1875,8 +1877,15 @@ static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm num_channels += ret; } - ret = of_property_count_elems_of_size(node, "st,adc-diff-channels", - sizeof(struct stm32_adc_diff_channel)); + /* + * each st,adc-diff-channels is a group of 2 u32 so we divide @ret + * to get the *real* number of channels. + */ + ret = device_property_count_u32(dev, "st,adc-diff-channels"); + if (ret < 0) + return ret; + + ret /= (int)(sizeof(struct stm32_adc_diff_channel) / sizeof(u32)); if (ret > adc_info->max_channels) { dev_err(&indio_dev->dev, "Bad st,adc-diff-channels?\n"); return -EINVAL; @@ -1886,8 +1895,8 @@ static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm } /* Optional sample time is provided either for each, or all channels */ - ret = of_property_count_u32_elems(node, "st,min-sample-time-nsecs"); - if (ret > 1 && ret != num_channels) { + adc->nsmps = device_property_count_u32(dev, "st,min-sample-time-nsecs"); + if (adc->nsmps > 1 && adc->nsmps != num_channels) { dev_err(&indio_dev->dev, "Invalid st,min-sample-time-nsecs\n"); return -EINVAL; } @@ -1897,21 +1906,20 @@ static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm static int stm32_adc_legacy_chan_init(struct iio_dev *indio_dev, struct stm32_adc *adc, - struct iio_chan_spec *channels) + struct iio_chan_spec *channels, + int nchans) { - struct device_node *node = indio_dev->dev.of_node; const struct stm32_adc_info *adc_info = adc->cfg->adc_info; struct stm32_adc_diff_channel diff[STM32_ADC_CH_MAX]; + struct device *dev = &indio_dev->dev; u32 num_diff = adc->num_diff; int size = num_diff * sizeof(*diff) / sizeof(u32); - int scan_index = 0, val, ret, i; - struct property *prop; - const __be32 *cur; - u32 smp = 0; + int scan_index = 0, ret, i, c; + u32 smp = 0, smps[STM32_ADC_CH_MAX], chans[STM32_ADC_CH_MAX]; if (num_diff) { - ret = of_property_read_u32_array(node, "st,adc-diff-channels", - (u32 *)diff, size); + ret = device_property_read_u32_array(dev, "st,adc-diff-channels", + (u32 *)diff, size); if (ret) { dev_err(&indio_dev->dev, "Failed to get diff channels %d\n", ret); return ret; @@ -1932,32 +1940,47 @@ static int stm32_adc_legacy_chan_init(struct iio_dev *indio_dev, } } - of_property_for_each_u32(node, "st,adc-channels", prop, cur, val) { - if (val >= adc_info->max_channels) { - dev_err(&indio_dev->dev, "Invalid channel %d\n", val); + ret = device_property_read_u32_array(dev, "st,adc-channels", chans, + nchans); + if (ret) + return ret; + + for (c = 0; c < nchans; c++) { + if (chans[c] >= adc_info->max_channels) { + dev_err(&indio_dev->dev, "Invalid channel %d\n", + chans[c]); return -EINVAL; } /* Channel can't be configured both as single-ended & diff */ for (i = 0; i < num_diff; i++) { - if (val == diff[i].vinp) { - dev_err(&indio_dev->dev, "channel %d misconfigured\n", val); + if (chans[c] == diff[i].vinp) { + dev_err(&indio_dev->dev, "channel %d misconfigured\n", chans[c]); return -EINVAL; } } - stm32_adc_chan_init_one(indio_dev, &channels[scan_index], val, - 0, scan_index, false); + stm32_adc_chan_init_one(indio_dev, &channels[scan_index], + chans[c], 0, scan_index, false); scan_index++; } + if (adc->nsmps > 0) { + ret = device_property_read_u32_array(dev, "st,min-sample-time-nsecs", + smps, adc->nsmps); + if (ret) + return ret; + } + for (i = 0; i < scan_index; i++) { /* - * Using of_property_read_u32_index(), smp value will only be - * modified if valid u32 value can be decoded. This allows to - * get either no value, 1 shared value for all indexes, or one - * value per channel. + * This check is used with the above logic so that smp value + * will only be modified if valid u32 value can be decoded. This + * allows to get either no value, 1 shared value for all indexes, + * or one value per channel. The point is to have the same + * behavior as 'of_property_read_u32_index()'. */ - of_property_read_u32_index(node, "st,min-sample-time-nsecs", i, &smp); + if (i < adc->nsmps) + smp = smps[i]; /* Prepare sampling time settings */ stm32_adc_smpr_init(adc, channels[i].channel, smp); @@ -2005,22 +2028,21 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev, struct stm32_adc *adc, struct iio_chan_spec *channels) { - struct device_node *node = indio_dev->dev.of_node; const struct stm32_adc_info *adc_info = adc->cfg->adc_info; - struct device_node *child; + struct fwnode_handle *child; const char *name; int val, scan_index = 0, ret; bool differential; u32 vin[2]; - for_each_available_child_of_node(node, child) { - ret = of_property_read_u32(child, "reg", &val); + device_for_each_child_node(&indio_dev->dev, child) { + ret = fwnode_property_read_u32(child, "reg", &val); if (ret) { dev_err(&indio_dev->dev, "Missing channel index %d\n", ret); goto err; } - ret = of_property_read_string(child, "label", &name); + ret = fwnode_property_read_string(child, "label", &name); /* label is optional */ if (!ret) { if (strlen(name) >= STM32_ADC_CH_SZ) { @@ -2047,7 +2069,7 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev, } differential = false; - ret = of_property_read_u32_array(child, "diff-channels", vin, 2); + ret = fwnode_property_read_u32_array(child, "diff-channels", vin, 2); /* diff-channels is optional */ if (!ret) { differential = true; @@ -2064,7 +2086,7 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev, stm32_adc_chan_init_one(indio_dev, &channels[scan_index], val, vin[1], scan_index, differential); - ret = of_property_read_u32(child, "st,min-sample-time-ns", &val); + ret = fwnode_property_read_u32(child, "st,min-sample-time-ns", &val); /* st,min-sample-time-ns is optional */ if (!ret) { stm32_adc_smpr_init(adc, channels[scan_index].channel, val); @@ -2082,14 +2104,13 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev, return scan_index; err: - of_node_put(child); + fwnode_handle_put(child); return ret; } -static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping) +static int stm32_adc_chan_fw_init(struct iio_dev *indio_dev, bool timestamping) { - struct device_node *node = indio_dev->dev.of_node; struct stm32_adc *adc = iio_priv(indio_dev); const struct stm32_adc_info *adc_info = adc->cfg->adc_info; struct iio_chan_spec *channels; @@ -2099,7 +2120,7 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping) for (i = 0; i < STM32_ADC_INT_CH_NB; i++) adc->int_ch[i] = STM32_ADC_INT_CH_NONE; - num_channels = of_get_available_child_count(node); + num_channels = device_get_child_node_count(&indio_dev->dev); /* If no channels have been found, fallback to channels legacy properties. */ if (!num_channels) { legacy = true; @@ -2130,7 +2151,8 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping) return -ENOMEM; if (legacy) - ret = stm32_adc_legacy_chan_init(indio_dev, adc, channels); + ret = stm32_adc_legacy_chan_init(indio_dev, adc, channels, + num_channels); else ret = stm32_adc_generic_chan_init(indio_dev, adc, channels); if (ret < 0) @@ -2212,9 +2234,6 @@ static int stm32_adc_probe(struct platform_device *pdev) bool timestamping = false; int ret; - if (!pdev->dev.of_node) - return -ENODEV; - indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc)); if (!indio_dev) return -ENOMEM; @@ -2223,17 +2242,16 @@ static int stm32_adc_probe(struct platform_device *pdev) adc->common = dev_get_drvdata(pdev->dev.parent); spin_lock_init(&adc->lock); init_completion(&adc->completion); - adc->cfg = (const struct stm32_adc_cfg *) - of_match_device(dev->driver->of_match_table, dev)->data; + adc->cfg = device_get_match_data(dev); indio_dev->name = dev_name(&pdev->dev); - indio_dev->dev.of_node = pdev->dev.of_node; + device_set_node(&indio_dev->dev, dev_fwnode(&pdev->dev)); indio_dev->info = &stm32_adc_iio_info; indio_dev->modes = INDIO_DIRECT_MODE | INDIO_HARDWARE_TRIGGERED; platform_set_drvdata(pdev, indio_dev); - ret = of_property_read_u32(pdev->dev.of_node, "reg", &adc->offset); + ret = device_property_read_u32(dev, "reg", &adc->offset); if (ret != 0) { dev_err(&pdev->dev, "missing reg property\n"); return -EINVAL; @@ -2262,7 +2280,7 @@ static int stm32_adc_probe(struct platform_device *pdev) } } - ret = stm32_adc_of_get_resolution(indio_dev); + ret = stm32_adc_fw_get_resolution(indio_dev); if (ret < 0) return ret; @@ -2279,7 +2297,7 @@ static int stm32_adc_probe(struct platform_device *pdev) timestamping = true; } - ret = stm32_adc_chan_of_init(indio_dev, timestamping); + ret = stm32_adc_chan_fw_init(indio_dev, timestamping); if (ret < 0) goto err_dma_disable; diff --git a/drivers/iio/adc/ti-ads131e08.c b/drivers/iio/adc/ti-ads131e08.c index 32237cacc9a3..5235a93f28bc 100644 --- a/drivers/iio/adc/ti-ads131e08.c +++ b/drivers/iio/adc/ti-ads131e08.c @@ -797,13 +797,6 @@ static void ads131e08_regulator_disable(void *data) regulator_disable(st->vref_reg); } -static void ads131e08_clk_disable(void *data) -{ - struct ads131e08_state *st = data; - - clk_disable_unprepare(st->adc_clk); -} - static int ads131e08_probe(struct spi_device *spi) { const struct ads131e08_info *info; @@ -896,21 +889,11 @@ static int ads131e08_probe(struct spi_device *spi) st->vref_reg = NULL; } - st->adc_clk = devm_clk_get(&spi->dev, "adc-clk"); + st->adc_clk = devm_clk_get_enabled(&spi->dev, "adc-clk"); if (IS_ERR(st->adc_clk)) return dev_err_probe(&spi->dev, PTR_ERR(st->adc_clk), "failed to get the ADC clock\n"); - ret = clk_prepare_enable(st->adc_clk); - if (ret) { - dev_err(&spi->dev, "failed to prepare/enable the ADC clock\n"); - return ret; - } - - ret = devm_add_action_or_reset(&spi->dev, ads131e08_clk_disable, st); - if (ret) - return ret; - adc_clk_hz = clk_get_rate(st->adc_clk); if (!adc_clk_hz) { dev_err(&spi->dev, "failed to get the ADC clock rate\n"); diff --git a/drivers/iio/adc/ti-tsc2046.c b/drivers/iio/adc/ti-tsc2046.c index 0d9436a69cbf..1bbb51a6683c 100644 --- a/drivers/iio/adc/ti-tsc2046.c +++ b/drivers/iio/adc/ti-tsc2046.c @@ -8,7 +8,9 @@ #include <linux/bitfield.h> #include <linux/delay.h> #include <linux/module.h> +#include <linux/regulator/consumer.h> #include <linux/spi/spi.h> +#include <linux/units.h> #include <asm/unaligned.h> @@ -139,6 +141,7 @@ enum tsc2046_state { struct tsc2046_adc_priv { struct spi_device *spi; const struct tsc2046_adc_dcfg *dcfg; + struct regulator *vref_reg; struct iio_trigger *trig; struct hrtimer trig_timer; @@ -173,6 +176,7 @@ struct tsc2046_adc_priv { u32 scan_interval_us; u32 time_per_scan_us; u32 time_per_bit_ns; + unsigned int vref_mv; struct tsc2046_adc_ch_cfg ch_cfg[TI_TSC2046_MAX_CHAN]; }; @@ -252,7 +256,9 @@ static u8 tsc2046_adc_get_cmd(struct tsc2046_adc_priv *priv, int ch_idx, case TI_TSC2046_ADDR_AUX: case TI_TSC2046_ADDR_VBAT: case TI_TSC2046_ADDR_TEMP0: - pd |= TI_TSC2046_SER | TI_TSC2046_PD1_VREF_ON; + pd |= TI_TSC2046_SER; + if (!priv->vref_reg) + pd |= TI_TSC2046_PD1_VREF_ON; } return TI_TSC2046_START | FIELD_PREP(TI_TSC2046_ADDR, ch_idx) | pd; @@ -468,7 +474,7 @@ static int tsc2046_adc_read_raw(struct iio_dev *indio_dev, * So, it is better to use external voltage-divider driver * instead, which is calculating complete chain. */ - *val = TI_TSC2046_INT_VREF; + *val = priv->vref_mv; *val2 = chan->scan_type.realbits; return IIO_VAL_FRACTIONAL_LOG2; } @@ -740,6 +746,49 @@ static void tsc2046_adc_parse_fwnode(struct tsc2046_adc_priv *priv) } } +static void tsc2046_adc_regulator_disable(void *data) +{ + struct tsc2046_adc_priv *priv = data; + + regulator_disable(priv->vref_reg); +} + +static int tsc2046_adc_configure_regulator(struct tsc2046_adc_priv *priv) +{ + struct device *dev = &priv->spi->dev; + int ret; + + priv->vref_reg = devm_regulator_get_optional(dev, "vref"); + if (IS_ERR(priv->vref_reg)) { + /* If regulator exists but can't be get, return an error */ + if (PTR_ERR(priv->vref_reg) != -ENODEV) + return PTR_ERR(priv->vref_reg); + priv->vref_reg = NULL; + } + if (!priv->vref_reg) { + /* Use internal reference */ + priv->vref_mv = TI_TSC2046_INT_VREF; + return 0; + } + + ret = regulator_enable(priv->vref_reg); + if (ret) + return ret; + + ret = devm_add_action_or_reset(dev, tsc2046_adc_regulator_disable, + priv); + if (ret) + return ret; + + ret = regulator_get_voltage(priv->vref_reg); + if (ret < 0) + return ret; + + priv->vref_mv = ret / MILLI; + + return 0; +} + static int tsc2046_adc_probe(struct spi_device *spi) { const struct tsc2046_adc_dcfg *dcfg; @@ -756,6 +805,11 @@ static int tsc2046_adc_probe(struct spi_device *spi) } dcfg = device_get_match_data(dev); + if (!dcfg) { + const struct spi_device_id *id = spi_get_device_id(spi); + + dcfg = (const struct tsc2046_adc_dcfg *)id->driver_data; + } if (!dcfg) return -EINVAL; @@ -781,6 +835,10 @@ static int tsc2046_adc_probe(struct spi_device *spi) indio_dev->num_channels = dcfg->num_channels; indio_dev->info = &tsc2046_adc_info; + ret = tsc2046_adc_configure_regulator(priv); + if (ret) + return ret; + tsc2046_adc_parse_fwnode(priv); ret = tsc2046_adc_setup_spi_msg(priv); @@ -833,11 +891,18 @@ static const struct of_device_id ads7950_of_table[] = { }; MODULE_DEVICE_TABLE(of, ads7950_of_table); +static const struct spi_device_id tsc2046_adc_spi_ids[] = { + { "tsc2046e-adc", (unsigned long)&tsc2046_adc_dcfg_tsc2046e }, + { } +}; +MODULE_DEVICE_TABLE(spi, tsc2046_adc_spi_ids); + static struct spi_driver tsc2046_adc_driver = { .driver = { .name = "tsc2046", .of_match_table = ads7950_of_table, }, + .id_table = tsc2046_adc_spi_ids, .probe = tsc2046_adc_probe, }; module_spi_driver(tsc2046_adc_driver); diff --git a/drivers/iio/adc/xilinx-ams.c b/drivers/iio/adc/xilinx-ams.c index 9cd2713146e5..5b4bdf3a26bb 100644 --- a/drivers/iio/adc/xilinx-ams.c +++ b/drivers/iio/adc/xilinx-ams.c @@ -1351,11 +1351,6 @@ static const struct of_device_id ams_of_match_table[] = { }; MODULE_DEVICE_TABLE(of, ams_of_match_table); -static void ams_clk_disable_unprepare(void *data) -{ - clk_disable_unprepare(data); -} - static int ams_probe(struct platform_device *pdev) { struct iio_dev *indio_dev; @@ -1380,18 +1375,10 @@ static int ams_probe(struct platform_device *pdev) if (IS_ERR(ams->base)) return PTR_ERR(ams->base); - ams->clk = devm_clk_get(&pdev->dev, NULL); + ams->clk = devm_clk_get_enabled(&pdev->dev, NULL); if (IS_ERR(ams->clk)) return PTR_ERR(ams->clk); - ret = clk_prepare_enable(ams->clk); - if (ret < 0) - return ret; - - ret = devm_add_action_or_reset(&pdev->dev, ams_clk_disable_unprepare, ams->clk); - if (ret < 0) - return ret; - ret = devm_delayed_work_autocancel(&pdev->dev, &ams->ams_unmask_work, ams_unmask_worker); if (ret < 0) diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c index 1b247722ba25..292f2892d223 100644 --- a/drivers/iio/adc/xilinx-xadc-core.c +++ b/drivers/iio/adc/xilinx-xadc-core.c @@ -1296,13 +1296,6 @@ static const char * const xadc_type_names[] = { [XADC_TYPE_US] = "xilinx-system-monitor", }; -static void xadc_clk_disable_unprepare(void *data) -{ - struct clk *clk = data; - - clk_disable_unprepare(clk); -} - static void xadc_cancel_delayed_work(void *data) { struct delayed_work *work = data; @@ -1374,19 +1367,10 @@ static int xadc_probe(struct platform_device *pdev) } } - xadc->clk = devm_clk_get(dev, NULL); + xadc->clk = devm_clk_get_enabled(dev, NULL); if (IS_ERR(xadc->clk)) return PTR_ERR(xadc->clk); - ret = clk_prepare_enable(xadc->clk); - if (ret) - return ret; - - ret = devm_add_action_or_reset(dev, - xadc_clk_disable_unprepare, xadc->clk); - if (ret) - return ret; - /* * Make sure not to exceed the maximum samplerate since otherwise the * resulting interrupt storm will soft-lock the system. diff --git a/drivers/iio/addac/Kconfig b/drivers/iio/addac/Kconfig index 138492362f20..fcf6d2269bfc 100644 --- a/drivers/iio/addac/Kconfig +++ b/drivers/iio/addac/Kconfig @@ -17,4 +17,20 @@ config AD74413R To compile this driver as a module, choose M here: the module will be called ad74413r. +config STX104 + tristate "Apex Embedded Systems STX104 driver" + depends on PC104 && X86 + select ISA_BUS_API + select GPIOLIB + help + Say yes here to build support for the Apex Embedded Systems STX104 + integrated analog PC/104 card. + + This driver supports the 16 channels of single-ended (8 channels of + differential) analog inputs, 2 channels of analog output, 4 digital + inputs, and 4 digital outputs provided by the STX104. + + The base port addresses for the devices may be configured via the base + array module parameter. + endmenu diff --git a/drivers/iio/addac/Makefile b/drivers/iio/addac/Makefile index cfd4bbe64ad3..17de20ef0d8e 100644 --- a/drivers/iio/addac/Makefile +++ b/drivers/iio/addac/Makefile @@ -5,3 +5,4 @@ # When adding new entries keep the list in alphabetical order obj-$(CONFIG_AD74413R) += ad74413r.o +obj-$(CONFIG_STX104) += stx104.o diff --git a/drivers/iio/adc/stx104.c b/drivers/iio/addac/stx104.c index 48a91a95e597..48a91a95e597 100644 --- a/drivers/iio/adc/stx104.c +++ b/drivers/iio/addac/stx104.c diff --git a/drivers/iio/cdc/Kconfig b/drivers/iio/cdc/Kconfig index 5e3319a3ff48..e0a5ce66a984 100644 --- a/drivers/iio/cdc/Kconfig +++ b/drivers/iio/cdc/Kconfig @@ -14,4 +14,14 @@ config AD7150 To compile this driver as a module, choose M here: the module will be called ad7150. +config AD7746 + tristate "Analog Devices AD7745, AD7746 AD7747 capacitive sensor driver" + depends on I2C + help + Say yes here to build support for Analog Devices capacitive sensors. + (AD7745, AD7746, AD7747) Provides direct access via sysfs. + + To compile this driver as a module, choose M here: the + module will be called ad7746. + endmenu diff --git a/drivers/iio/cdc/Makefile b/drivers/iio/cdc/Makefile index ee490637b032..41db756d8020 100644 --- a/drivers/iio/cdc/Makefile +++ b/drivers/iio/cdc/Makefile @@ -4,3 +4,4 @@ # obj-$(CONFIG_AD7150) += ad7150.o +obj-$(CONFIG_AD7746) += ad7746.o diff --git a/drivers/staging/iio/cdc/ad7746.c b/drivers/iio/cdc/ad7746.c index 52b8957c19c9..b266f5328140 100644 --- a/drivers/staging/iio/cdc/ad7746.c +++ b/drivers/iio/cdc/ad7746.c @@ -5,6 +5,7 @@ * Copyright 2011 Analog Devices Inc. */ +#include <linux/bitfield.h> #include <linux/delay.h> #include <linux/device.h> #include <linux/i2c.h> @@ -15,12 +16,12 @@ #include <linux/stat.h> #include <linux/sysfs.h> +#include <asm/unaligned.h> + #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> -/* - * AD7746 Register Definition - */ +/* AD7746 Register Definition */ #define AD7746_REG_STATUS 0 #define AD7746_REG_CAP_DATA_HIGH 1 @@ -48,11 +49,12 @@ #define AD7746_CAPSETUP_CACHOP BIT(0) /* Voltage/Temperature Setup Register Bit Designations (AD7746_REG_VT_SETUP) */ -#define AD7746_VTSETUP_VTEN (1 << 7) -#define AD7746_VTSETUP_VTMD_INT_TEMP (0 << 5) -#define AD7746_VTSETUP_VTMD_EXT_TEMP (1 << 5) -#define AD7746_VTSETUP_VTMD_VDD_MON (2 << 5) -#define AD7746_VTSETUP_VTMD_EXT_VIN (3 << 5) +#define AD7746_VTSETUP_VTEN BIT(7) +#define AD7746_VTSETUP_VTMD_MASK GENMASK(6, 5) +#define AD7746_VTSETUP_VTMD_INT_TEMP 0 +#define AD7746_VTSETUP_VTMD_EXT_TEMP 1 +#define AD7746_VTSETUP_VTMD_VDD_MON 2 +#define AD7746_VTSETUP_VTMD_EXT_VIN 3 #define AD7746_VTSETUP_EXTREF BIT(4) #define AD7746_VTSETUP_VTSHORT BIT(1) #define AD7746_VTSETUP_VTCHOP BIT(0) @@ -64,23 +66,22 @@ #define AD7746_EXCSETUP_NEXCB BIT(4) #define AD7746_EXCSETUP_EXCA BIT(3) #define AD7746_EXCSETUP_NEXCA BIT(2) -#define AD7746_EXCSETUP_EXCLVL(x) (((x) & 0x3) << 0) +#define AD7746_EXCSETUP_EXCLVL_MASK GENMASK(1, 0) /* Config Register Bit Designations (AD7746_REG_CFG) */ -#define AD7746_CONF_VTFS_SHIFT 6 -#define AD7746_CONF_CAPFS_SHIFT 3 #define AD7746_CONF_VTFS_MASK GENMASK(7, 6) #define AD7746_CONF_CAPFS_MASK GENMASK(5, 3) -#define AD7746_CONF_MODE_IDLE (0 << 0) -#define AD7746_CONF_MODE_CONT_CONV (1 << 0) -#define AD7746_CONF_MODE_SINGLE_CONV (2 << 0) -#define AD7746_CONF_MODE_PWRDN (3 << 0) -#define AD7746_CONF_MODE_OFFS_CAL (5 << 0) -#define AD7746_CONF_MODE_GAIN_CAL (6 << 0) +#define AD7746_CONF_MODE_MASK GENMASK(2, 0) +#define AD7746_CONF_MODE_IDLE 0 +#define AD7746_CONF_MODE_CONT_CONV 1 +#define AD7746_CONF_MODE_SINGLE_CONV 2 +#define AD7746_CONF_MODE_PWRDN 3 +#define AD7746_CONF_MODE_OFFS_CAL 5 +#define AD7746_CONF_MODE_GAIN_CAL 6 /* CAPDAC Register Bit Designations (AD7746_REG_CAPDACx) */ #define AD7746_CAPDAC_DACEN BIT(7) -#define AD7746_CAPDAC_DACP(x) ((x) & 0x7F) +#define AD7746_CAPDAC_DACP_MASK GENMASK(6, 0) struct ad7746_chip_info { struct i2c_client *client; @@ -94,11 +95,6 @@ struct ad7746_chip_info { u8 vt_setup; u8 capdac[2][2]; s8 capdac_set; - - union { - __be32 d32; - u8 d8[4]; - } data ____cacheline_aligned; }; enum ad7746_chan { @@ -112,43 +108,87 @@ enum ad7746_chan { CIN2_DIFF, }; +struct ad7746_chan_info { + u8 addr; + union { + u8 vtmd; + struct { /* CAP SETUP fields */ + unsigned int cin2 : 1; + unsigned int capdiff : 1; + }; + }; +}; + +static const struct ad7746_chan_info ad7746_chan_info[] = { + [VIN] = { + .addr = AD7746_REG_VT_DATA_HIGH, + .vtmd = AD7746_VTSETUP_VTMD_EXT_VIN, + }, + [VIN_VDD] = { + .addr = AD7746_REG_VT_DATA_HIGH, + .vtmd = AD7746_VTSETUP_VTMD_VDD_MON, + }, + [TEMP_INT] = { + .addr = AD7746_REG_VT_DATA_HIGH, + .vtmd = AD7746_VTSETUP_VTMD_INT_TEMP, + }, + [TEMP_EXT] = { + .addr = AD7746_REG_VT_DATA_HIGH, + .vtmd = AD7746_VTSETUP_VTMD_EXT_TEMP, + }, + [CIN1] = { + .addr = AD7746_REG_CAP_DATA_HIGH, + }, + [CIN1_DIFF] = { + .addr = AD7746_REG_CAP_DATA_HIGH, + .capdiff = 1, + }, + [CIN2] = { + .addr = AD7746_REG_CAP_DATA_HIGH, + .cin2 = 1, + }, + [CIN2_DIFF] = { + .addr = AD7746_REG_CAP_DATA_HIGH, + .cin2 = 1, + .capdiff = 1, + }, +}; + static const struct iio_chan_spec ad7746_channels[] = { [VIN] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 0, - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | - BIT(IIO_CHAN_INFO_SAMP_FREQ), - .address = AD7746_REG_VT_DATA_HIGH << 8 | - AD7746_VTSETUP_VTMD_EXT_VIN, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .address = VIN, }, [VIN_VDD] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 1, .extend_name = "supply", - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | - BIT(IIO_CHAN_INFO_SAMP_FREQ), - .address = AD7746_REG_VT_DATA_HIGH << 8 | - AD7746_VTSETUP_VTMD_VDD_MON, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .address = VIN_VDD, }, [TEMP_INT] = { .type = IIO_TEMP, .indexed = 1, .channel = 0, - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), - .address = AD7746_REG_VT_DATA_HIGH << 8 | - AD7746_VTSETUP_VTMD_INT_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .address = TEMP_INT, }, [TEMP_EXT] = { .type = IIO_TEMP, .indexed = 1, .channel = 1, - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), - .address = AD7746_REG_VT_DATA_HIGH << 8 | - AD7746_VTSETUP_VTMD_EXT_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .address = TEMP_EXT, }, [CIN1] = { .type = IIO_CAPACITANCE, @@ -158,7 +198,8 @@ static const struct iio_chan_spec ad7746_channels[] = { BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET), .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ), - .address = AD7746_REG_CAP_DATA_HIGH << 8, + .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .address = CIN1, }, [CIN1_DIFF] = { .type = IIO_CAPACITANCE, @@ -167,11 +208,11 @@ static const struct iio_chan_spec ad7746_channels[] = { .channel = 0, .channel2 = 2, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | - BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET), + BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_ZEROPOINT), .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ), - .address = AD7746_REG_CAP_DATA_HIGH << 8 | - AD7746_CAPSETUP_CAPDIFF + .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .address = CIN1_DIFF, }, [CIN2] = { .type = IIO_CAPACITANCE, @@ -181,8 +222,8 @@ static const struct iio_chan_spec ad7746_channels[] = { BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET), .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ), - .address = AD7746_REG_CAP_DATA_HIGH << 8 | - AD7746_CAPSETUP_CIN2, + .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .address = CIN2, }, [CIN2_DIFF] = { .type = IIO_CAPACITANCE, @@ -191,22 +232,22 @@ static const struct iio_chan_spec ad7746_channels[] = { .channel = 1, .channel2 = 3, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | - BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET), + BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_ZEROPOINT), .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ), - .address = AD7746_REG_CAP_DATA_HIGH << 8 | - AD7746_CAPSETUP_CAPDIFF | AD7746_CAPSETUP_CIN2, + .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .address = CIN2_DIFF, } }; /* Values are Update Rate (Hz), Conversion Time (ms) + 1*/ static const unsigned char ad7746_vt_filter_rate_table[][2] = { - {50, 20 + 1}, {31, 32 + 1}, {16, 62 + 1}, {8, 122 + 1}, + { 50, 20 + 1 }, { 31, 32 + 1 }, { 16, 62 + 1 }, { 8, 122 + 1 }, }; static const unsigned char ad7746_cap_filter_rate_table[][2] = { - {91, 11 + 1}, {84, 12 + 1}, {50, 20 + 1}, {26, 38 + 1}, - {16, 62 + 1}, {13, 77 + 1}, {11, 92 + 1}, {9, 110 + 1}, + { 91, 11 + 1 }, { 84, 12 + 1 }, { 50, 20 + 1 }, { 26, 38 + 1 }, + { 16, 62 + 1 }, { 13, 77 + 1 }, { 11, 92 + 1 }, { 9, 110 + 1 }, }; static int ad7746_set_capdac(struct ad7746_chip_info *chip, int channel) @@ -231,10 +272,13 @@ static int ad7746_select_channel(struct iio_dev *indio_dev, switch (chan->type) { case IIO_CAPACITANCE: - cap_setup = (chan->address & 0xFF) | AD7746_CAPSETUP_CAPEN; + cap_setup = FIELD_PREP(AD7746_CAPSETUP_CIN2, + ad7746_chan_info[chan->address].cin2) | + FIELD_PREP(AD7746_CAPSETUP_CAPDIFF, + ad7746_chan_info[chan->address].capdiff) | + FIELD_PREP(AD7746_CAPSETUP_CAPEN, 1); vt_setup = chip->vt_setup & ~AD7746_VTSETUP_VTEN; - idx = (chip->config & AD7746_CONF_CAPFS_MASK) >> - AD7746_CONF_CAPFS_SHIFT; + idx = FIELD_GET(AD7746_CONF_CAPFS_MASK, chip->config); delay = ad7746_cap_filter_rate_table[idx][1]; ret = ad7746_set_capdac(chip, chan->channel); @@ -246,10 +290,11 @@ static int ad7746_select_channel(struct iio_dev *indio_dev, break; case IIO_VOLTAGE: case IIO_TEMP: - vt_setup = (chan->address & 0xFF) | AD7746_VTSETUP_VTEN; + vt_setup = FIELD_PREP(AD7746_VTSETUP_VTMD_MASK, + ad7746_chan_info[chan->address].vtmd) | + FIELD_PREP(AD7746_VTSETUP_VTEN, 1); cap_setup = chip->cap_setup & ~AD7746_CAPSETUP_CAPEN; - idx = (chip->config & AD7746_CONF_VTFS_MASK) >> - AD7746_CONF_VTFS_SHIFT; + idx = FIELD_GET(AD7746_CONF_VTFS_MASK, chip->config); delay = ad7746_cap_filter_rate_table[idx][1]; break; default: @@ -332,7 +377,8 @@ static ssize_t ad7746_start_offset_calib(struct device *dev, return ret; return ad7746_start_calib(dev, attr, buf, len, - AD7746_CONF_MODE_OFFS_CAL); + FIELD_PREP(AD7746_CONF_MODE_MASK, + AD7746_CONF_MODE_OFFS_CAL)); } static ssize_t ad7746_start_gain_calib(struct device *dev, @@ -347,7 +393,8 @@ static ssize_t ad7746_start_gain_calib(struct device *dev, return ret; return ad7746_start_calib(dev, attr, buf, len, - AD7746_CONF_MODE_GAIN_CAL); + FIELD_PREP(AD7746_CONF_MODE_MASK, + AD7746_CONF_MODE_GAIN_CAL)); } static IIO_DEVICE_ATTR(in_capacitance0_calibbias_calibration, @@ -374,7 +421,7 @@ static int ad7746_store_cap_filter_rate_setup(struct ad7746_chip_info *chip, i = ARRAY_SIZE(ad7746_cap_filter_rate_table) - 1; chip->config &= ~AD7746_CONF_CAPFS_MASK; - chip->config |= i << AD7746_CONF_CAPFS_SHIFT; + chip->config |= FIELD_PREP(AD7746_CONF_CAPFS_MASK, i); return 0; } @@ -392,23 +439,17 @@ static int ad7746_store_vt_filter_rate_setup(struct ad7746_chip_info *chip, i = ARRAY_SIZE(ad7746_vt_filter_rate_table) - 1; chip->config &= ~AD7746_CONF_VTFS_MASK; - chip->config |= i << AD7746_CONF_VTFS_SHIFT; + chip->config |= FIELD_PREP(AD7746_CONF_VTFS_MASK, i); return 0; } -static IIO_CONST_ATTR(in_voltage_sampling_frequency_available, "50 31 16 8"); -static IIO_CONST_ATTR(in_capacitance_sampling_frequency_available, - "91 84 50 26 16 13 11 9"); - static struct attribute *ad7746_attributes[] = { &iio_dev_attr_in_capacitance0_calibbias_calibration.dev_attr.attr, &iio_dev_attr_in_capacitance0_calibscale_calibration.dev_attr.attr, &iio_dev_attr_in_capacitance1_calibscale_calibration.dev_attr.attr, &iio_dev_attr_in_capacitance1_calibbias_calibration.dev_attr.attr, &iio_dev_attr_in_voltage0_calibscale_calibration.dev_attr.attr, - &iio_const_attr_in_voltage_sampling_frequency_available.dev_attr.attr, - &iio_const_attr_in_capacitance_sampling_frequency_available.dev_attr.attr, NULL, }; @@ -425,14 +466,10 @@ static int ad7746_write_raw(struct iio_dev *indio_dev, struct ad7746_chip_info *chip = iio_priv(indio_dev); int ret, reg; - mutex_lock(&chip->lock); - switch (mask) { case IIO_CHAN_INFO_CALIBSCALE: - if (val != 1) { - ret = -EINVAL; - goto out; - } + if (val != 1) + return -EINVAL; val = (val2 * 1024) / 15625; @@ -444,33 +481,32 @@ static int ad7746_write_raw(struct iio_dev *indio_dev, reg = AD7746_REG_VOLT_GAINH; break; default: - ret = -EINVAL; - goto out; + return -EINVAL; } + mutex_lock(&chip->lock); ret = i2c_smbus_write_word_swapped(chip->client, reg, val); + mutex_unlock(&chip->lock); if (ret < 0) - goto out; + return ret; - ret = 0; - break; + return 0; case IIO_CHAN_INFO_CALIBBIAS: - if (val < 0 || val > 0xFFFF) { - ret = -EINVAL; - goto out; - } + if (val < 0 || val > 0xFFFF) + return -EINVAL; + + mutex_lock(&chip->lock); ret = i2c_smbus_write_word_swapped(chip->client, AD7746_REG_CAP_OFFH, val); + mutex_unlock(&chip->lock); if (ret < 0) - goto out; + return ret; - ret = 0; - break; + return 0; case IIO_CHAN_INFO_OFFSET: - if (val < 0 || val > 43008000) { /* 21pF */ - ret = -EINVAL; - goto out; - } + case IIO_CHAN_INFO_ZEROPOINT: + if (val < 0 || val > 43008000) /* 21pF */ + return -EINVAL; /* * CAPDAC Scale = 21pF_typ / 127 @@ -479,42 +515,104 @@ static int ad7746_write_raw(struct iio_dev *indio_dev, */ val /= 338646; - + mutex_lock(&chip->lock); chip->capdac[chan->channel][chan->differential] = val > 0 ? - AD7746_CAPDAC_DACP(val) | AD7746_CAPDAC_DACEN : 0; + FIELD_PREP(AD7746_CAPDAC_DACP_MASK, val) | AD7746_CAPDAC_DACEN : 0; ret = ad7746_set_capdac(chip, chan->channel); - if (ret < 0) - goto out; + if (ret < 0) { + mutex_unlock(&chip->lock); + return ret; + } chip->capdac_set = chan->channel; + mutex_unlock(&chip->lock); - ret = 0; - break; + return 0; case IIO_CHAN_INFO_SAMP_FREQ: - if (val2) { - ret = -EINVAL; - goto out; - } + if (val2) + return -EINVAL; switch (chan->type) { case IIO_CAPACITANCE: + mutex_lock(&chip->lock); ret = ad7746_store_cap_filter_rate_setup(chip, val); - break; + mutex_unlock(&chip->lock); + return ret; case IIO_VOLTAGE: + mutex_lock(&chip->lock); ret = ad7746_store_vt_filter_rate_setup(chip, val); - break; + mutex_unlock(&chip->lock); + return ret; default: - ret = -EINVAL; + return -EINVAL; } + default: + return -EINVAL; + } +} + +static const int ad7746_v_samp_freq[] = { 50, 31, 16, 8, }; +static const int ad7746_cap_samp_freq[] = { 91, 84, 50, 26, 16, 13, 11, 9, }; + +static int ad7746_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, const int **vals, + int *type, int *length, long mask) +{ + if (mask != IIO_CHAN_INFO_SAMP_FREQ) + return -EINVAL; + + switch (chan->type) { + case IIO_VOLTAGE: + *vals = ad7746_v_samp_freq; + *length = ARRAY_SIZE(ad7746_v_samp_freq); + break; + case IIO_CAPACITANCE: + *vals = ad7746_cap_samp_freq; + *length = ARRAY_SIZE(ad7746_cap_samp_freq); break; default: - ret = -EINVAL; + return -EINVAL; } + *type = IIO_VAL_INT; + return IIO_AVAIL_LIST; +} -out: - mutex_unlock(&chip->lock); - return ret; +static int ad7746_read_channel(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val) +{ + struct ad7746_chip_info *chip = iio_priv(indio_dev); + int ret, delay; + u8 data[3]; + u8 regval; + + ret = ad7746_select_channel(indio_dev, chan); + if (ret < 0) + return ret; + delay = ret; + + regval = chip->config | FIELD_PREP(AD7746_CONF_MODE_MASK, + AD7746_CONF_MODE_SINGLE_CONV); + ret = i2c_smbus_write_byte_data(chip->client, AD7746_REG_CFG, regval); + if (ret < 0) + return ret; + + msleep(delay); + /* Now read the actual register */ + ret = i2c_smbus_read_i2c_block_data(chip->client, + ad7746_chan_info[chan->address].addr, + sizeof(data), data); + if (ret < 0) + return ret; + + /* + * Offset applied internally becaue the _offset userspace interface is + * needed for the CAP DACs which apply a controllable offset. + */ + *val = get_unaligned_be24(data) - 0x800000; + + return 0; } static int ad7746_read_raw(struct iio_dev *indio_dev, @@ -523,55 +621,18 @@ static int ad7746_read_raw(struct iio_dev *indio_dev, long mask) { struct ad7746_chip_info *chip = iio_priv(indio_dev); - int ret, delay, idx; - u8 regval, reg; - - mutex_lock(&chip->lock); + int ret, idx; + u8 reg; switch (mask) { case IIO_CHAN_INFO_RAW: - case IIO_CHAN_INFO_PROCESSED: - ret = ad7746_select_channel(indio_dev, chan); - if (ret < 0) - goto out; - delay = ret; - - regval = chip->config | AD7746_CONF_MODE_SINGLE_CONV; - ret = i2c_smbus_write_byte_data(chip->client, AD7746_REG_CFG, - regval); - if (ret < 0) - goto out; - - msleep(delay); - /* Now read the actual register */ - - ret = i2c_smbus_read_i2c_block_data(chip->client, - chan->address >> 8, 3, - &chip->data.d8[1]); - + mutex_lock(&chip->lock); + ret = ad7746_read_channel(indio_dev, chan, val); + mutex_unlock(&chip->lock); if (ret < 0) - goto out; - - *val = (be32_to_cpu(chip->data.d32) & 0xFFFFFF) - 0x800000; - - switch (chan->type) { - case IIO_TEMP: - /* - * temperature in milli degrees Celsius - * T = ((*val / 2048) - 4096) * 1000 - */ - *val = (*val * 125) / 256; - break; - case IIO_VOLTAGE: - if (chan->channel == 1) /* supply_raw*/ - *val = *val * 6; - break; - default: - break; - } + return ret; - ret = IIO_VAL_INT; - break; + return IIO_VAL_INT; case IIO_CHAN_INFO_CALIBSCALE: switch (chan->type) { case IIO_CAPACITANCE: @@ -581,83 +642,78 @@ static int ad7746_read_raw(struct iio_dev *indio_dev, reg = AD7746_REG_VOLT_GAINH; break; default: - ret = -EINVAL; - goto out; + return -EINVAL; } + mutex_lock(&chip->lock); ret = i2c_smbus_read_word_swapped(chip->client, reg); + mutex_unlock(&chip->lock); if (ret < 0) - goto out; + return ret; /* 1 + gain_val / 2^16 */ *val = 1; *val2 = (15625 * ret) / 1024; - ret = IIO_VAL_INT_PLUS_MICRO; - break; + return IIO_VAL_INT_PLUS_MICRO; case IIO_CHAN_INFO_CALIBBIAS: + mutex_lock(&chip->lock); ret = i2c_smbus_read_word_swapped(chip->client, AD7746_REG_CAP_OFFH); + mutex_unlock(&chip->lock); if (ret < 0) - goto out; + return ret; *val = ret; - ret = IIO_VAL_INT; - break; + return IIO_VAL_INT; case IIO_CHAN_INFO_OFFSET: - *val = AD7746_CAPDAC_DACP(chip->capdac[chan->channel] - [chan->differential]) * 338646; + case IIO_CHAN_INFO_ZEROPOINT: + *val = FIELD_GET(AD7746_CAPDAC_DACP_MASK, + chip->capdac[chan->channel][chan->differential]) * 338646; - ret = IIO_VAL_INT; - break; + return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: switch (chan->type) { case IIO_CAPACITANCE: /* 8.192pf / 2^24 */ *val = 0; *val2 = 488; - ret = IIO_VAL_INT_PLUS_NANO; - break; + return IIO_VAL_INT_PLUS_NANO; case IIO_VOLTAGE: /* 1170mV / 2^23 */ *val = 1170; + if (chan->channel == 1) + *val *= 6; *val2 = 23; - ret = IIO_VAL_FRACTIONAL_LOG2; - break; + return IIO_VAL_FRACTIONAL_LOG2; + case IIO_TEMP: + *val = 125; + *val2 = 8; + return IIO_VAL_FRACTIONAL_LOG2; default: - ret = -EINVAL; - break; + return -EINVAL; } - - break; case IIO_CHAN_INFO_SAMP_FREQ: switch (chan->type) { case IIO_CAPACITANCE: - idx = (chip->config & AD7746_CONF_CAPFS_MASK) >> - AD7746_CONF_CAPFS_SHIFT; + idx = FIELD_GET(AD7746_CONF_CAPFS_MASK, chip->config); *val = ad7746_cap_filter_rate_table[idx][0]; - ret = IIO_VAL_INT; - break; + return IIO_VAL_INT; case IIO_VOLTAGE: - idx = (chip->config & AD7746_CONF_VTFS_MASK) >> - AD7746_CONF_VTFS_SHIFT; + idx = FIELD_GET(AD7746_CONF_VTFS_MASK, chip->config); *val = ad7746_vt_filter_rate_table[idx][0]; - ret = IIO_VAL_INT; - break; + return IIO_VAL_INT; default: - ret = -EINVAL; + return -EINVAL; } - break; default: - ret = -EINVAL; + return -EINVAL; } -out: - mutex_unlock(&chip->lock); - return ret; } static const struct iio_info ad7746_info = { .attrs = &ad7746_attribute_group, .read_raw = ad7746_read_raw, + .read_avail = ad7746_read_avail, .write_raw = ad7746_write_raw, }; @@ -674,10 +730,9 @@ static int ad7746_probe(struct i2c_client *client, indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip)); if (!indio_dev) return -ENOMEM; + chip = iio_priv(indio_dev); mutex_init(&chip->lock); - /* this is only used for device removal purposes */ - i2c_set_clientdata(client, indio_dev); chip->client = client; chip->capdac_set = -1; @@ -710,24 +765,24 @@ static int ad7746_probe(struct i2c_client *client, if (!ret) { switch (vdd_permille) { case 125: - regval |= AD7746_EXCSETUP_EXCLVL(0); + regval |= FIELD_PREP(AD7746_EXCSETUP_EXCLVL_MASK, 0); break; case 250: - regval |= AD7746_EXCSETUP_EXCLVL(1); + regval |= FIELD_PREP(AD7746_EXCSETUP_EXCLVL_MASK, 1); break; case 375: - regval |= AD7746_EXCSETUP_EXCLVL(2); + regval |= FIELD_PREP(AD7746_EXCSETUP_EXCLVL_MASK, 2); break; case 500: - regval |= AD7746_EXCSETUP_EXCLVL(3); + regval |= FIELD_PREP(AD7746_EXCSETUP_EXCLVL_MASK, 3); break; default: break; } } - ret = i2c_smbus_write_byte_data(chip->client, - AD7746_REG_EXC_SETUP, regval); + ret = i2c_smbus_write_byte_data(chip->client, AD7746_REG_EXC_SETUP, + regval); if (ret < 0) return ret; @@ -740,7 +795,6 @@ static const struct i2c_device_id ad7746_id[] = { { "ad7747", 7747 }, {} }; - MODULE_DEVICE_TABLE(i2c, ad7746_id); static const struct of_device_id ad7746_of_match[] = { @@ -749,7 +803,6 @@ static const struct of_device_id ad7746_of_match[] = { { .compatible = "adi,ad7747" }, { }, }; - MODULE_DEVICE_TABLE(of, ad7746_of_match); static struct i2c_driver ad7746_driver = { diff --git a/drivers/iio/common/scmi_sensors/scmi_iio.c b/drivers/iio/common/scmi_sensors/scmi_iio.c index 793d628db55f..54ccf19ab2bb 100644 --- a/drivers/iio/common/scmi_sensors/scmi_iio.c +++ b/drivers/iio/common/scmi_sensors/scmi_iio.c @@ -18,6 +18,7 @@ #include <linux/scmi_protocol.h> #include <linux/time.h> #include <linux/types.h> +#include <linux/units.h> #define SCMI_IIO_NUM_OF_AXIS 3 @@ -130,7 +131,6 @@ static const struct iio_buffer_setup_ops scmi_iio_buffer_ops = { static int scmi_iio_set_odr_val(struct iio_dev *iio_dev, int val, int val2) { struct scmi_iio_priv *sensor = iio_priv(iio_dev); - const unsigned long UHZ_PER_HZ = 1000000UL; u64 sec, mult, uHz, sf; u32 sensor_config; char buf[32]; @@ -145,7 +145,7 @@ static int scmi_iio_set_odr_val(struct iio_dev *iio_dev, int val, int val2) return err; } - uHz = val * UHZ_PER_HZ + val2; + uHz = val * MICROHZ_PER_HZ + val2; /* * The seconds field in the sensor interval in SCMI is 16 bits long @@ -156,10 +156,10 @@ static int scmi_iio_set_odr_val(struct iio_dev *iio_dev, int val, int val2) * count the number of characters */ sf = (u64)uHz * 0xFFFF; - do_div(sf, UHZ_PER_HZ); + do_div(sf, MICROHZ_PER_HZ); mult = scnprintf(buf, sizeof(buf), "%llu", sf) - 1; - sec = int_pow(10, mult) * UHZ_PER_HZ; + sec = int_pow(10, mult) * MICROHZ_PER_HZ; do_div(sec, uHz); if (sec == 0) { dev_err(&iio_dev->dev, diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c index 9910ba1da085..35720c64fea8 100644 --- a/drivers/iio/common/st_sensors/st_sensors_core.c +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -354,7 +354,7 @@ void st_sensors_dev_name_probe(struct device *dev, char *name, int len) return; /* The name from the match takes precedence if present */ - strlcpy(name, match, len); + strscpy(name, match, len); } EXPORT_SYMBOL_NS(st_sensors_dev_name_probe, IIO_ST_SENSORS); diff --git a/drivers/iio/dac/ad5593r.c b/drivers/iio/dac/ad5593r.c index 92be661034a6..8e5e014e0c28 100644 --- a/drivers/iio/dac/ad5593r.c +++ b/drivers/iio/dac/ad5593r.c @@ -13,6 +13,8 @@ #include <linux/module.h> #include <linux/mod_devicetable.h> +#include <asm/unaligned.h> + #define AD5593R_MODE_CONF (0 << 4) #define AD5593R_MODE_DAC_WRITE (1 << 4) #define AD5593R_MODE_ADC_READBACK (4 << 4) @@ -20,6 +22,24 @@ #define AD5593R_MODE_GPIO_READBACK (6 << 4) #define AD5593R_MODE_REG_READBACK (7 << 4) +static int ad5593r_read_word(struct i2c_client *i2c, u8 reg, u16 *value) +{ + int ret; + u8 buf[2]; + + ret = i2c_smbus_write_byte(i2c, reg); + if (ret < 0) + return ret; + + ret = i2c_master_recv(i2c, buf, sizeof(buf)); + if (ret < 0) + return ret; + + *value = get_unaligned_be16(buf); + + return 0; +} + static int ad5593r_write_dac(struct ad5592r_state *st, unsigned chan, u16 value) { struct i2c_client *i2c = to_i2c_client(st->dev); @@ -38,13 +58,7 @@ static int ad5593r_read_adc(struct ad5592r_state *st, unsigned chan, u16 *value) if (val < 0) return (int) val; - val = i2c_smbus_read_word_swapped(i2c, AD5593R_MODE_ADC_READBACK); - if (val < 0) - return (int) val; - - *value = (u16) val; - - return 0; + return ad5593r_read_word(i2c, AD5593R_MODE_ADC_READBACK, value); } static int ad5593r_reg_write(struct ad5592r_state *st, u8 reg, u16 value) @@ -58,25 +72,19 @@ static int ad5593r_reg_write(struct ad5592r_state *st, u8 reg, u16 value) static int ad5593r_reg_read(struct ad5592r_state *st, u8 reg, u16 *value) { struct i2c_client *i2c = to_i2c_client(st->dev); - s32 val; - - val = i2c_smbus_read_word_swapped(i2c, AD5593R_MODE_REG_READBACK | reg); - if (val < 0) - return (int) val; - *value = (u16) val; - - return 0; + return ad5593r_read_word(i2c, AD5593R_MODE_REG_READBACK | reg, value); } static int ad5593r_gpio_read(struct ad5592r_state *st, u8 *value) { struct i2c_client *i2c = to_i2c_client(st->dev); - s32 val; + u16 val; + int ret; - val = i2c_smbus_read_word_swapped(i2c, AD5593R_MODE_GPIO_READBACK); - if (val < 0) - return (int) val; + ret = ad5593r_read_word(i2c, AD5593R_MODE_GPIO_READBACK, &val); + if (ret) + return ret; *value = (u8) val; @@ -94,6 +102,10 @@ static const struct ad5592r_rw_ops ad5593r_rw_ops = { static int ad5593r_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { + if (!i2c_check_functionality(i2c->adapter, + I2C_FUNC_SMBUS_BYTE | I2C_FUNC_I2C)) + return -EOPNOTSUPP; + return ad5592r_probe(&i2c->dev, id->name, &ad5593r_rw_ops); } diff --git a/drivers/iio/frequency/adf4371.c b/drivers/iio/frequency/adf4371.c index 135c8cedc33d..b27088464826 100644 --- a/drivers/iio/frequency/adf4371.c +++ b/drivers/iio/frequency/adf4371.c @@ -540,13 +540,6 @@ static int adf4371_setup(struct adf4371_state *st) return regmap_bulk_write(st->regmap, ADF4371_REG(0x30), st->buf, 5); } -static void adf4371_clk_disable(void *data) -{ - struct adf4371_state *st = data; - - clk_disable_unprepare(st->clkin); -} - static int adf4371_probe(struct spi_device *spi) { const struct spi_device_id *id = spi_get_device_id(spi); @@ -579,18 +572,10 @@ static int adf4371_probe(struct spi_device *spi) indio_dev->channels = st->chip_info->channels; indio_dev->num_channels = st->chip_info->num_channels; - st->clkin = devm_clk_get(&spi->dev, "clkin"); + st->clkin = devm_clk_get_enabled(&spi->dev, "clkin"); if (IS_ERR(st->clkin)) return PTR_ERR(st->clkin); - ret = clk_prepare_enable(st->clkin); - if (ret < 0) - return ret; - - ret = devm_add_action_or_reset(&spi->dev, adf4371_clk_disable, st); - if (ret) - return ret; - st->clkin_freq = clk_get_rate(st->clkin); ret = adf4371_setup(st); diff --git a/drivers/iio/frequency/admv1014.c b/drivers/iio/frequency/admv1014.c index 865addd10db4..bb5e1feef42b 100644 --- a/drivers/iio/frequency/admv1014.c +++ b/drivers/iio/frequency/admv1014.c @@ -669,8 +669,7 @@ static int admv1014_init(struct admv1014_state *st) chip_id = FIELD_GET(ADMV1014_CHIP_ID_MSK, chip_id); if (chip_id != ADMV1014_CHIP_ID) { dev_err(&spi->dev, "Invalid Chip ID.\n"); - ret = -EINVAL; - return ret; + return -EINVAL; } ret = __admv1014_spi_update_bits(st, ADMV1014_REG_QUAD, diff --git a/drivers/iio/frequency/adrf6780.c b/drivers/iio/frequency/adrf6780.c index 21878bad0909..b4defb82f37e 100644 --- a/drivers/iio/frequency/adrf6780.c +++ b/drivers/iio/frequency/adrf6780.c @@ -441,11 +441,6 @@ static void adrf6780_properties_parse(struct adrf6780_state *st) st->vdet_out_en = device_property_read_bool(&spi->dev, "adi,vdet-out-en"); } -static void adrf6780_clk_disable(void *data) -{ - clk_disable_unprepare(data); -} - static void adrf6780_powerdown(void *data) { /* Disable all components in the Enable Register */ @@ -473,20 +468,11 @@ static int adrf6780_probe(struct spi_device *spi) adrf6780_properties_parse(st); - st->clkin = devm_clk_get(&spi->dev, "lo_in"); + st->clkin = devm_clk_get_enabled(&spi->dev, "lo_in"); if (IS_ERR(st->clkin)) return dev_err_probe(&spi->dev, PTR_ERR(st->clkin), "failed to get the LO input clock\n"); - ret = clk_prepare_enable(st->clkin); - if (ret) - return ret; - - ret = devm_add_action_or_reset(&spi->dev, adrf6780_clk_disable, - st->clkin); - if (ret) - return ret; - mutex_init(&st->lock); ret = adrf6780_init(st); diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig index 001ca2c3ff95..f1d7d4b5e222 100644 --- a/drivers/iio/imu/Kconfig +++ b/drivers/iio/imu/Kconfig @@ -52,6 +52,7 @@ config ADIS16480 ADIS16485, ADIS16488 inertial sensors. source "drivers/iio/imu/bmi160/Kconfig" +source "drivers/iio/imu/bno055/Kconfig" config FXOS8700 tristate diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile index c82748096c77..6eb612034722 100644 --- a/drivers/iio/imu/Makefile +++ b/drivers/iio/imu/Makefile @@ -15,6 +15,7 @@ adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) += adis_buffer.o obj-$(CONFIG_IIO_ADIS_LIB) += adis_lib.o obj-y += bmi160/ +obj-y += bno055/ obj-$(CONFIG_FXOS8700) += fxos8700_core.o obj-$(CONFIG_FXOS8700_I2C) += fxos8700_i2c.o diff --git a/drivers/iio/imu/adis16475.c b/drivers/iio/imu/adis16475.c index ff2b0fab840a..aec55f7e1f26 100644 --- a/drivers/iio/imu/adis16475.c +++ b/drivers/iio/imu/adis16475.c @@ -1120,11 +1120,6 @@ check_burst32: return IRQ_HANDLED; } -static void adis16475_disable_clk(void *data) -{ - clk_disable_unprepare((struct clk *)data); -} - static int adis16475_config_sync_mode(struct adis16475 *st) { int ret; @@ -1150,19 +1145,11 @@ static int adis16475_config_sync_mode(struct adis16475 *st) /* All the other modes require external input signal */ if (sync->sync_mode != ADIS16475_SYNC_OUTPUT) { - struct clk *clk = devm_clk_get(dev, NULL); + struct clk *clk = devm_clk_get_enabled(dev, NULL); if (IS_ERR(clk)) return PTR_ERR(clk); - ret = clk_prepare_enable(clk); - if (ret) - return ret; - - ret = devm_add_action_or_reset(dev, adis16475_disable_clk, clk); - if (ret) - return ret; - st->clk_freq = clk_get_rate(clk); if (st->clk_freq < sync->min_rate || st->clk_freq > sync->max_rate) { diff --git a/drivers/iio/imu/bno055/Kconfig b/drivers/iio/imu/bno055/Kconfig new file mode 100644 index 000000000000..fa79b1ac4f85 --- /dev/null +++ b/drivers/iio/imu/bno055/Kconfig @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: GPL-2.0 + +config BOSCH_BNO055 + tristate + +config BOSCH_BNO055_SERIAL + tristate "Bosch BNO055 attached via UART" + depends on SERIAL_DEV_BUS + select BOSCH_BNO055 + help + Enable this to support Bosch BNO055 IMUs attached via UART. + + This driver can also be built as a module. If so, the module will be + called bno055_sl. + +config BOSCH_BNO055_I2C + tristate "Bosch BNO055 attached via I2C bus" + depends on I2C + select REGMAP_I2C + select BOSCH_BNO055 + help + Enable this to support Bosch BNO055 IMUs attached via I2C bus. + + This driver can also be built as a module. If so, the module will be + called bno055_i2c. diff --git a/drivers/iio/imu/bno055/Makefile b/drivers/iio/imu/bno055/Makefile new file mode 100644 index 000000000000..98c624730dae --- /dev/null +++ b/drivers/iio/imu/bno055/Makefile @@ -0,0 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_BOSCH_BNO055) += bno055.o +obj-$(CONFIG_BOSCH_BNO055_SERIAL) += bno055_ser.o +bno055_ser-y := bno055_ser_core.o +# define_trace.h needs to know how to find our header +CFLAGS_bno055_ser_trace.o := -I$(src) +bno055_ser-$(CONFIG_TRACING) += bno055_ser_trace.o + +obj-$(CONFIG_BOSCH_BNO055_I2C) += bno055_i2c.o diff --git a/drivers/iio/imu/bno055/bno055.c b/drivers/iio/imu/bno055/bno055.c new file mode 100644 index 000000000000..307557a609e3 --- /dev/null +++ b/drivers/iio/imu/bno055/bno055.c @@ -0,0 +1,1685 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * IIO driver for Bosch BNO055 IMU + * + * Copyright (C) 2021-2022 Istituto Italiano di Tecnologia + * Electronic Design Laboratory + * Written by Andrea Merello <andrea.merello@iit.it> + * + * Portions of this driver are taken from the BNO055 driver patch + * from Vlad Dogaru which is Copyright (c) 2016, Intel Corporation. + * + * This driver is also based on BMI160 driver, which is: + * Copyright (c) 2016, Intel Corporation. + * Copyright (c) 2019, Martin Kelly. + */ + +#include <linux/bitfield.h> +#include <linux/bitmap.h> +#include <linux/clk.h> +#include <linux/debugfs.h> +#include <linux/device.h> +#include <linux/firmware.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/regmap.h> +#include <linux/util_macros.h> + +#include <linux/iio/buffer.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> + +#include "bno055.h" + +#define BNO055_FW_UID_FMT "bno055-caldata-%*phN.dat" +#define BNO055_FW_GENERIC_NAME "bno055-caldata.dat" + +/* common registers */ +#define BNO055_PAGESEL_REG 0x7 + +/* page 0 registers */ +#define BNO055_CHIP_ID_REG 0x0 +#define BNO055_CHIP_ID_MAGIC 0xA0 +#define BNO055_SW_REV_LSB_REG 0x4 +#define BNO055_SW_REV_MSB_REG 0x5 +#define BNO055_ACC_DATA_X_LSB_REG 0x8 +#define BNO055_ACC_DATA_Y_LSB_REG 0xA +#define BNO055_ACC_DATA_Z_LSB_REG 0xC +#define BNO055_MAG_DATA_X_LSB_REG 0xE +#define BNO055_MAG_DATA_Y_LSB_REG 0x10 +#define BNO055_MAG_DATA_Z_LSB_REG 0x12 +#define BNO055_GYR_DATA_X_LSB_REG 0x14 +#define BNO055_GYR_DATA_Y_LSB_REG 0x16 +#define BNO055_GYR_DATA_Z_LSB_REG 0x18 +#define BNO055_EUL_DATA_X_LSB_REG 0x1A +#define BNO055_EUL_DATA_Y_LSB_REG 0x1C +#define BNO055_EUL_DATA_Z_LSB_REG 0x1E +#define BNO055_QUAT_DATA_W_LSB_REG 0x20 +#define BNO055_LIA_DATA_X_LSB_REG 0x28 +#define BNO055_LIA_DATA_Y_LSB_REG 0x2A +#define BNO055_LIA_DATA_Z_LSB_REG 0x2C +#define BNO055_GRAVITY_DATA_X_LSB_REG 0x2E +#define BNO055_GRAVITY_DATA_Y_LSB_REG 0x30 +#define BNO055_GRAVITY_DATA_Z_LSB_REG 0x32 +#define BNO055_SCAN_CH_COUNT ((BNO055_GRAVITY_DATA_Z_LSB_REG - BNO055_ACC_DATA_X_LSB_REG) / 2) +#define BNO055_TEMP_REG 0x34 +#define BNO055_CALIB_STAT_REG 0x35 +#define BNO055_CALIB_STAT_MAGN_SHIFT 0 +#define BNO055_CALIB_STAT_ACCEL_SHIFT 2 +#define BNO055_CALIB_STAT_GYRO_SHIFT 4 +#define BNO055_CALIB_STAT_SYS_SHIFT 6 +#define BNO055_SYS_ERR_REG 0x3A +#define BNO055_POWER_MODE_REG 0x3E +#define BNO055_POWER_MODE_NORMAL 0 +#define BNO055_SYS_TRIGGER_REG 0x3F +#define BNO055_SYS_TRIGGER_RST_SYS BIT(5) +#define BNO055_SYS_TRIGGER_CLK_SEL BIT(7) +#define BNO055_OPR_MODE_REG 0x3D +#define BNO055_OPR_MODE_CONFIG 0x0 +#define BNO055_OPR_MODE_AMG 0x7 +#define BNO055_OPR_MODE_FUSION_FMC_OFF 0xB +#define BNO055_OPR_MODE_FUSION 0xC +#define BNO055_UNIT_SEL_REG 0x3B +/* Android orientation mode means: pitch value decreases turning clockwise */ +#define BNO055_UNIT_SEL_ANDROID BIT(7) +#define BNO055_UNIT_SEL_GYR_RPS BIT(1) +#define BNO055_CALDATA_START 0x55 +#define BNO055_CALDATA_END 0x6A +#define BNO055_CALDATA_LEN 22 + +/* + * The difference in address between the register that contains the + * value and the register that contains the offset. This applies for + * accel, gyro and magn channels. + */ +#define BNO055_REG_OFFSET_ADDR 0x4D + +/* page 1 registers */ +#define BNO055_PG1(x) ((x) | 0x80) +#define BNO055_ACC_CONFIG_REG BNO055_PG1(0x8) +#define BNO055_ACC_CONFIG_LPF_MASK GENMASK(4, 2) +#define BNO055_ACC_CONFIG_RANGE_MASK GENMASK(1, 0) +#define BNO055_MAG_CONFIG_REG BNO055_PG1(0x9) +#define BNO055_MAG_CONFIG_HIGHACCURACY 0x18 +#define BNO055_MAG_CONFIG_ODR_MASK GENMASK(2, 0) +#define BNO055_GYR_CONFIG_REG BNO055_PG1(0xA) +#define BNO055_GYR_CONFIG_RANGE_MASK GENMASK(2, 0) +#define BNO055_GYR_CONFIG_LPF_MASK GENMASK(5, 3) +#define BNO055_GYR_AM_SET_REG BNO055_PG1(0x1F) +#define BNO055_UID_LOWER_REG BNO055_PG1(0x50) +#define BNO055_UID_HIGHER_REG BNO055_PG1(0x5F) +#define BNO055_UID_LEN 16 + +struct bno055_sysfs_attr { + int *vals; + int len; + int *fusion_vals; + int *hw_xlate; + int type; +}; + +static int bno055_acc_lpf_vals[] = { + 7, 810000, 15, 630000, 31, 250000, 62, 500000, + 125, 0, 250, 0, 500, 0, 1000, 0, +}; + +static struct bno055_sysfs_attr bno055_acc_lpf = { + .vals = bno055_acc_lpf_vals, + .len = ARRAY_SIZE(bno055_acc_lpf_vals), + .fusion_vals = (int[]){62, 500000}, + .type = IIO_VAL_INT_PLUS_MICRO, +}; + +static int bno055_acc_range_vals[] = { + /* G: 2, 4, 8, 16 */ + 1962, 3924, 7848, 15696 +}; + +static struct bno055_sysfs_attr bno055_acc_range = { + .vals = bno055_acc_range_vals, + .len = ARRAY_SIZE(bno055_acc_range_vals), + .fusion_vals = (int[]){3924}, /* 4G */ + .type = IIO_VAL_INT, +}; + +/* + * Theoretically the IMU should return data in a given (i.e. fixed) unit + * regardless of the range setting. This happens for the accelerometer, but not + * for the gyroscope; the gyroscope range setting affects the scale. + * This is probably due to this[0] bug. + * For this reason we map the internal range setting onto the standard IIO scale + * attribute for gyro. + * Since the bug[0] may be fixed in future, we check for the IMU FW version and + * eventually warn the user. + * Currently we just don't care about "range" attributes for gyro. + * + * [0] https://community.bosch-sensortec.com/t5/MEMS-sensors-forum/BNO055-Wrong-sensitivity-resolution-in-datasheet/td-p/10266 + */ + +/* + * dps = hwval * (dps_range/2^15) + * rps = hwval * (rps_range/2^15) + * = hwval * (dps_range/(2^15 * k)) + * where k is rad-to-deg factor + */ +static int bno055_gyr_scale_vals[] = { + 125, 1877467, 250, 1877467, 500, 1877467, + 1000, 1877467, 2000, 1877467, +}; + +static struct bno055_sysfs_attr bno055_gyr_scale = { + .vals = bno055_gyr_scale_vals, + .len = ARRAY_SIZE(bno055_gyr_scale_vals), + .fusion_vals = (int[]){1, 900}, + .hw_xlate = (int[]){4, 3, 2, 1, 0}, + .type = IIO_VAL_FRACTIONAL, +}; + +static int bno055_gyr_lpf_vals[] = {12, 23, 32, 47, 64, 116, 230, 523}; +static struct bno055_sysfs_attr bno055_gyr_lpf = { + .vals = bno055_gyr_lpf_vals, + .len = ARRAY_SIZE(bno055_gyr_lpf_vals), + .fusion_vals = (int[]){32}, + .hw_xlate = (int[]){5, 4, 7, 3, 6, 2, 1, 0}, + .type = IIO_VAL_INT, +}; + +static int bno055_mag_odr_vals[] = {2, 6, 8, 10, 15, 20, 25, 30}; +static struct bno055_sysfs_attr bno055_mag_odr = { + .vals = bno055_mag_odr_vals, + .len = ARRAY_SIZE(bno055_mag_odr_vals), + .fusion_vals = (int[]){20}, + .type = IIO_VAL_INT, +}; + +struct bno055_priv { + struct regmap *regmap; + struct device *dev; + struct clk *clk; + int operation_mode; + int xfer_burst_break_thr; + struct mutex lock; + u8 uid[BNO055_UID_LEN]; + struct gpio_desc *reset_gpio; + bool sw_reset; + struct { + __le16 chans[BNO055_SCAN_CH_COUNT]; + s64 timestamp __aligned(8); + } buf; + struct dentry *debugfs; +}; + +static bool bno055_regmap_volatile(struct device *dev, unsigned int reg) +{ + /* data and status registers */ + if (reg >= BNO055_ACC_DATA_X_LSB_REG && reg <= BNO055_SYS_ERR_REG) + return true; + + /* when in fusion mode, config is updated by chip */ + if (reg == BNO055_MAG_CONFIG_REG || + reg == BNO055_ACC_CONFIG_REG || + reg == BNO055_GYR_CONFIG_REG) + return true; + + /* calibration data may be updated by the IMU */ + if (reg >= BNO055_CALDATA_START && reg <= BNO055_CALDATA_END) + return true; + + return false; +} + +static bool bno055_regmap_readable(struct device *dev, unsigned int reg) +{ + /* unnamed PG0 reserved areas */ + if ((reg < BNO055_PG1(0) && reg > BNO055_CALDATA_END) || + reg == 0x3C) + return false; + + /* unnamed PG1 reserved areas */ + if (reg > BNO055_PG1(BNO055_UID_HIGHER_REG) || + (reg < BNO055_PG1(BNO055_UID_LOWER_REG) && reg > BNO055_PG1(BNO055_GYR_AM_SET_REG)) || + reg == BNO055_PG1(0xE) || + (reg < BNO055_PG1(BNO055_PAGESEL_REG) && reg >= BNO055_PG1(0x0))) + return false; + return true; +} + +static bool bno055_regmap_writeable(struct device *dev, unsigned int reg) +{ + /* + * Unreadable registers are indeed reserved; there are no WO regs + * (except for a single bit in SYS_TRIGGER register) + */ + if (!bno055_regmap_readable(dev, reg)) + return false; + + /* data and status registers */ + if (reg >= BNO055_ACC_DATA_X_LSB_REG && reg <= BNO055_SYS_ERR_REG) + return false; + + /* ID areas */ + if (reg < BNO055_PAGESEL_REG || + (reg <= BNO055_UID_HIGHER_REG && reg >= BNO055_UID_LOWER_REG)) + return false; + + return true; +} + +static const struct regmap_range_cfg bno055_regmap_ranges[] = { + { + .range_min = 0, + .range_max = 0x7f * 2, + .selector_reg = BNO055_PAGESEL_REG, + .selector_mask = GENMASK(7, 0), + .selector_shift = 0, + .window_start = 0, + .window_len = 0x80, + }, +}; + +const struct regmap_config bno055_regmap_config = { + .name = "bno055", + .reg_bits = 8, + .val_bits = 8, + .ranges = bno055_regmap_ranges, + .num_ranges = 1, + .volatile_reg = bno055_regmap_volatile, + .max_register = 0x80 * 2, + .writeable_reg = bno055_regmap_writeable, + .readable_reg = bno055_regmap_readable, + .cache_type = REGCACHE_RBTREE, +}; +EXPORT_SYMBOL_NS_GPL(bno055_regmap_config, IIO_BNO055); + +/* must be called in configuration mode */ +static int bno055_calibration_load(struct bno055_priv *priv, const u8 *data, int len) +{ + if (len != BNO055_CALDATA_LEN) { + dev_dbg(priv->dev, "Invalid calibration file size %d (expected %d)", + len, BNO055_CALDATA_LEN); + return -EINVAL; + } + + dev_dbg(priv->dev, "loading cal data: %*ph", BNO055_CALDATA_LEN, data); + return regmap_bulk_write(priv->regmap, BNO055_CALDATA_START, + data, BNO055_CALDATA_LEN); +} + +static int bno055_operation_mode_do_set(struct bno055_priv *priv, + int operation_mode) +{ + int ret; + + ret = regmap_write(priv->regmap, BNO055_OPR_MODE_REG, + operation_mode); + if (ret) + return ret; + + /* Following datasheet specifications: sensor takes 7mS up to 19 mS to switch mode */ + msleep(20); + + return 0; +} + +static int bno055_system_reset(struct bno055_priv *priv) +{ + int ret; + + if (priv->reset_gpio) { + gpiod_set_value_cansleep(priv->reset_gpio, 0); + usleep_range(5000, 10000); + gpiod_set_value_cansleep(priv->reset_gpio, 1); + } else if (priv->sw_reset) { + ret = regmap_write(priv->regmap, BNO055_SYS_TRIGGER_REG, + BNO055_SYS_TRIGGER_RST_SYS); + if (ret) + return ret; + } else { + return 0; + } + + regcache_drop_region(priv->regmap, 0x0, 0xff); + usleep_range(650000, 700000); + + return 0; +} + +static int bno055_init(struct bno055_priv *priv, const u8 *caldata, int len) +{ + int ret; + + ret = bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_CONFIG); + if (ret) + return ret; + + ret = regmap_write(priv->regmap, BNO055_POWER_MODE_REG, + BNO055_POWER_MODE_NORMAL); + if (ret) + return ret; + + ret = regmap_write(priv->regmap, BNO055_SYS_TRIGGER_REG, + priv->clk ? BNO055_SYS_TRIGGER_CLK_SEL : 0); + if (ret) + return ret; + + /* use standard SI units */ + ret = regmap_write(priv->regmap, BNO055_UNIT_SEL_REG, + BNO055_UNIT_SEL_ANDROID | BNO055_UNIT_SEL_GYR_RPS); + if (ret) + return ret; + + if (caldata) { + ret = bno055_calibration_load(priv, caldata, len); + if (ret) + dev_warn(priv->dev, "failed to load calibration data with error %d\n", + ret); + } + + return 0; +} + +static ssize_t bno055_operation_mode_set(struct bno055_priv *priv, + int operation_mode) +{ + u8 caldata[BNO055_CALDATA_LEN]; + int ret; + + mutex_lock(&priv->lock); + + ret = bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_CONFIG); + if (ret) + goto exit_unlock; + + if (operation_mode == BNO055_OPR_MODE_FUSION || + operation_mode == BNO055_OPR_MODE_FUSION_FMC_OFF) { + /* for entering fusion mode, reset the chip to clear the algo state */ + ret = regmap_bulk_read(priv->regmap, BNO055_CALDATA_START, caldata, + BNO055_CALDATA_LEN); + if (ret) + goto exit_unlock; + + ret = bno055_system_reset(priv); + if (ret) + goto exit_unlock; + + ret = bno055_init(priv, caldata, BNO055_CALDATA_LEN); + if (ret) + goto exit_unlock; + } + + ret = bno055_operation_mode_do_set(priv, operation_mode); + if (ret) + goto exit_unlock; + + priv->operation_mode = operation_mode; + +exit_unlock: + mutex_unlock(&priv->lock); + return ret; +} + +static void bno055_uninit(void *arg) +{ + struct bno055_priv *priv = arg; + + /* stop the IMU */ + bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_CONFIG); +} + +#define BNO055_CHANNEL(_type, _axis, _index, _address, _sep, _sh, _avail) { \ + .address = _address, \ + .type = _type, \ + .modified = 1, \ + .channel2 = IIO_MOD_##_axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | (_sep), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | (_sh), \ + .info_mask_shared_by_type_available = _avail, \ + .scan_index = _index, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_LE, \ + .repeat = IIO_MOD_##_axis == IIO_MOD_QUATERNION ? 4 : 0, \ + }, \ +} + +/* scan indexes follow DATA register order */ +enum bno055_scan_axis { + BNO055_SCAN_ACCEL_X, + BNO055_SCAN_ACCEL_Y, + BNO055_SCAN_ACCEL_Z, + BNO055_SCAN_MAGN_X, + BNO055_SCAN_MAGN_Y, + BNO055_SCAN_MAGN_Z, + BNO055_SCAN_GYRO_X, + BNO055_SCAN_GYRO_Y, + BNO055_SCAN_GYRO_Z, + BNO055_SCAN_YAW, + BNO055_SCAN_ROLL, + BNO055_SCAN_PITCH, + BNO055_SCAN_QUATERNION, + BNO055_SCAN_LIA_X, + BNO055_SCAN_LIA_Y, + BNO055_SCAN_LIA_Z, + BNO055_SCAN_GRAVITY_X, + BNO055_SCAN_GRAVITY_Y, + BNO055_SCAN_GRAVITY_Z, + BNO055_SCAN_TIMESTAMP, + _BNO055_SCAN_MAX +}; + +static const struct iio_chan_spec bno055_channels[] = { + /* accelerometer */ + BNO055_CHANNEL(IIO_ACCEL, X, BNO055_SCAN_ACCEL_X, + BNO055_ACC_DATA_X_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET), + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)), + BNO055_CHANNEL(IIO_ACCEL, Y, BNO055_SCAN_ACCEL_Y, + BNO055_ACC_DATA_Y_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET), + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)), + BNO055_CHANNEL(IIO_ACCEL, Z, BNO055_SCAN_ACCEL_Z, + BNO055_ACC_DATA_Z_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET), + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)), + /* gyroscope */ + BNO055_CHANNEL(IIO_ANGL_VEL, X, BNO055_SCAN_GYRO_X, + BNO055_GYR_DATA_X_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET), + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) | + BIT(IIO_CHAN_INFO_SCALE)), + BNO055_CHANNEL(IIO_ANGL_VEL, Y, BNO055_SCAN_GYRO_Y, + BNO055_GYR_DATA_Y_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET), + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) | + BIT(IIO_CHAN_INFO_SCALE)), + BNO055_CHANNEL(IIO_ANGL_VEL, Z, BNO055_SCAN_GYRO_Z, + BNO055_GYR_DATA_Z_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET), + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) | + BIT(IIO_CHAN_INFO_SCALE)), + /* magnetometer */ + BNO055_CHANNEL(IIO_MAGN, X, BNO055_SCAN_MAGN_X, + BNO055_MAG_DATA_X_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET), + BIT(IIO_CHAN_INFO_SAMP_FREQ), BIT(IIO_CHAN_INFO_SAMP_FREQ)), + BNO055_CHANNEL(IIO_MAGN, Y, BNO055_SCAN_MAGN_Y, + BNO055_MAG_DATA_Y_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET), + BIT(IIO_CHAN_INFO_SAMP_FREQ), BIT(IIO_CHAN_INFO_SAMP_FREQ)), + BNO055_CHANNEL(IIO_MAGN, Z, BNO055_SCAN_MAGN_Z, + BNO055_MAG_DATA_Z_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET), + BIT(IIO_CHAN_INFO_SAMP_FREQ), BIT(IIO_CHAN_INFO_SAMP_FREQ)), + /* euler angle */ + BNO055_CHANNEL(IIO_ROT, YAW, BNO055_SCAN_YAW, + BNO055_EUL_DATA_X_LSB_REG, 0, 0, 0), + BNO055_CHANNEL(IIO_ROT, ROLL, BNO055_SCAN_ROLL, + BNO055_EUL_DATA_Y_LSB_REG, 0, 0, 0), + BNO055_CHANNEL(IIO_ROT, PITCH, BNO055_SCAN_PITCH, + BNO055_EUL_DATA_Z_LSB_REG, 0, 0, 0), + /* quaternion */ + BNO055_CHANNEL(IIO_ROT, QUATERNION, BNO055_SCAN_QUATERNION, + BNO055_QUAT_DATA_W_LSB_REG, 0, 0, 0), + + /* linear acceleration */ + BNO055_CHANNEL(IIO_ACCEL, LINEAR_X, BNO055_SCAN_LIA_X, + BNO055_LIA_DATA_X_LSB_REG, 0, 0, 0), + BNO055_CHANNEL(IIO_ACCEL, LINEAR_Y, BNO055_SCAN_LIA_Y, + BNO055_LIA_DATA_Y_LSB_REG, 0, 0, 0), + BNO055_CHANNEL(IIO_ACCEL, LINEAR_Z, BNO055_SCAN_LIA_Z, + BNO055_LIA_DATA_Z_LSB_REG, 0, 0, 0), + + /* gravity vector */ + BNO055_CHANNEL(IIO_GRAVITY, X, BNO055_SCAN_GRAVITY_X, + BNO055_GRAVITY_DATA_X_LSB_REG, 0, 0, 0), + BNO055_CHANNEL(IIO_GRAVITY, Y, BNO055_SCAN_GRAVITY_Y, + BNO055_GRAVITY_DATA_Y_LSB_REG, 0, 0, 0), + BNO055_CHANNEL(IIO_GRAVITY, Z, BNO055_SCAN_GRAVITY_Z, + BNO055_GRAVITY_DATA_Z_LSB_REG, 0, 0, 0), + + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .scan_index = -1, + }, + IIO_CHAN_SOFT_TIMESTAMP(BNO055_SCAN_TIMESTAMP), +}; + +static int bno055_get_regmask(struct bno055_priv *priv, int *val, int *val2, + int reg, int mask, struct bno055_sysfs_attr *attr) +{ + const int shift = __ffs(mask); + int hwval, idx; + int ret; + int i; + + ret = regmap_read(priv->regmap, reg, &hwval); + if (ret) + return ret; + + idx = (hwval & mask) >> shift; + if (attr->hw_xlate) + for (i = 0; i < attr->len; i++) + if (attr->hw_xlate[i] == idx) { + idx = i; + break; + } + if (attr->type == IIO_VAL_INT) { + *val = attr->vals[idx]; + } else { /* IIO_VAL_INT_PLUS_MICRO or IIO_VAL_FRACTIONAL */ + *val = attr->vals[idx * 2]; + *val2 = attr->vals[idx * 2 + 1]; + } + + return attr->type; +} + +static int bno055_set_regmask(struct bno055_priv *priv, int val, int val2, + int reg, int mask, struct bno055_sysfs_attr *attr) +{ + const int shift = __ffs(mask); + int best_delta; + int req_val; + int tbl_val; + bool first; + int delta; + int hwval; + int ret; + int len; + int i; + + /* + * The closest value the HW supports is only one in fusion mode, + * and it is autoselected, so don't do anything, just return OK, + * as the closest possible value has been (virtually) selected + */ + if (priv->operation_mode != BNO055_OPR_MODE_AMG) + return 0; + + len = attr->len; + + /* + * We always get a request in INT_PLUS_MICRO, but we + * take care of the micro part only when we really have + * non-integer tables. This prevents 32-bit overflow with + * larger integers contained in integer tables. + */ + req_val = val; + if (attr->type != IIO_VAL_INT) { + len /= 2; + req_val = min(val, 2147) * 1000000 + val2; + } + + first = true; + for (i = 0; i < len; i++) { + switch (attr->type) { + case IIO_VAL_INT: + tbl_val = attr->vals[i]; + break; + case IIO_VAL_INT_PLUS_MICRO: + WARN_ON(attr->vals[i * 2] > 2147); + tbl_val = attr->vals[i * 2] * 1000000 + + attr->vals[i * 2 + 1]; + break; + case IIO_VAL_FRACTIONAL: + WARN_ON(attr->vals[i * 2] > 4294); + tbl_val = attr->vals[i * 2] * 1000000 / + attr->vals[i * 2 + 1]; + break; + default: + return -EINVAL; + } + delta = abs(tbl_val - req_val); + if (delta < best_delta || first) { + best_delta = delta; + hwval = i; + first = false; + } + } + + if (attr->hw_xlate) + hwval = attr->hw_xlate[hwval]; + + ret = bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_CONFIG); + if (ret) + return ret; + + ret = regmap_update_bits(priv->regmap, reg, mask, hwval << shift); + if (ret) + return ret; + + return bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_AMG); +} + +static int bno055_read_simple_chan(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct bno055_priv *priv = iio_priv(indio_dev); + __le16 raw_val; + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = regmap_bulk_read(priv->regmap, chan->address, + &raw_val, sizeof(raw_val)); + if (ret < 0) + return ret; + *val = sign_extend32(le16_to_cpu(raw_val), 15); + return IIO_VAL_INT; + case IIO_CHAN_INFO_OFFSET: + if (priv->operation_mode != BNO055_OPR_MODE_AMG) { + *val = 0; + } else { + ret = regmap_bulk_read(priv->regmap, + chan->address + + BNO055_REG_OFFSET_ADDR, + &raw_val, sizeof(raw_val)); + if (ret < 0) + return ret; + /* + * IMU reports sensor offsets; IIO wants correction + * offsets, thus we need the 'minus' here. + */ + *val = -sign_extend32(le16_to_cpu(raw_val), 15); + } + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 1; + switch (chan->type) { + case IIO_GRAVITY: + /* Table 3-35: 1 m/s^2 = 100 LSB */ + case IIO_ACCEL: + /* Table 3-17: 1 m/s^2 = 100 LSB */ + *val2 = 100; + break; + case IIO_MAGN: + /* + * Table 3-19: 1 uT = 16 LSB. But we need + * Gauss: 1G = 0.1 uT. + */ + *val2 = 160; + break; + case IIO_ANGL_VEL: + /* + * Table 3-22: 1 Rps = 900 LSB + * .. but this is not exactly true. See comment at the + * beginning of this file. + */ + if (priv->operation_mode != BNO055_OPR_MODE_AMG) { + *val = bno055_gyr_scale.fusion_vals[0]; + *val2 = bno055_gyr_scale.fusion_vals[1]; + return IIO_VAL_FRACTIONAL; + } + + return bno055_get_regmask(priv, val, val2, + BNO055_GYR_CONFIG_REG, + BNO055_GYR_CONFIG_RANGE_MASK, + &bno055_gyr_scale); + break; + case IIO_ROT: + /* Table 3-28: 1 degree = 16 LSB */ + *val2 = 16; + break; + default: + return -EINVAL; + } + return IIO_VAL_FRACTIONAL; + + case IIO_CHAN_INFO_SAMP_FREQ: + if (chan->type != IIO_MAGN) + return -EINVAL; + + return bno055_get_regmask(priv, val, val2, + BNO055_MAG_CONFIG_REG, + BNO055_MAG_CONFIG_ODR_MASK, + &bno055_mag_odr); + + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: + switch (chan->type) { + case IIO_ANGL_VEL: + return bno055_get_regmask(priv, val, val2, + BNO055_GYR_CONFIG_REG, + BNO055_GYR_CONFIG_LPF_MASK, + &bno055_gyr_lpf); + case IIO_ACCEL: + return bno055_get_regmask(priv, val, val2, + BNO055_ACC_CONFIG_REG, + BNO055_ACC_CONFIG_LPF_MASK, + &bno055_acc_lpf); + default: + return -EINVAL; + } + + default: + return -EINVAL; + } +} + +static int bno055_sysfs_attr_avail(struct bno055_priv *priv, struct bno055_sysfs_attr *attr, + const int **vals, int *length) +{ + if (priv->operation_mode != BNO055_OPR_MODE_AMG) { + /* locked when fusion enabled */ + *vals = attr->fusion_vals; + if (attr->type == IIO_VAL_INT) + *length = 1; + else + *length = 2; /* IIO_VAL_INT_PLUS_MICRO or IIO_VAL_FRACTIONAL*/ + } else { + *vals = attr->vals; + *length = attr->len; + } + + return attr->type; +} + +static int bno055_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long mask) +{ + struct bno055_priv *priv = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_ANGL_VEL: + *type = bno055_sysfs_attr_avail(priv, &bno055_gyr_scale, + vals, length); + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: + switch (chan->type) { + case IIO_ANGL_VEL: + *type = bno055_sysfs_attr_avail(priv, &bno055_gyr_lpf, + vals, length); + return IIO_AVAIL_LIST; + case IIO_ACCEL: + *type = bno055_sysfs_attr_avail(priv, &bno055_acc_lpf, + vals, length); + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } + + break; + case IIO_CHAN_INFO_SAMP_FREQ: + switch (chan->type) { + case IIO_MAGN: + *type = bno055_sysfs_attr_avail(priv, &bno055_mag_odr, + vals, length); + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +static int bno055_read_temp_chan(struct iio_dev *indio_dev, int *val) +{ + struct bno055_priv *priv = iio_priv(indio_dev); + unsigned int raw_val; + int ret; + + ret = regmap_read(priv->regmap, BNO055_TEMP_REG, &raw_val); + if (ret < 0) + return ret; + + /* + * Tables 3-36 and 3-37: one byte of priv, signed, 1 LSB = 1C. + * ABI wants milliC. + */ + *val = raw_val * 1000; + + return IIO_VAL_INT; +} + +static int bno055_read_quaternion(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int size, int *vals, int *val_len, + long mask) +{ + struct bno055_priv *priv = iio_priv(indio_dev); + __le16 raw_vals[4]; + int i, ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (size < 4) + return -EINVAL; + ret = regmap_bulk_read(priv->regmap, + BNO055_QUAT_DATA_W_LSB_REG, + raw_vals, sizeof(raw_vals)); + if (ret < 0) + return ret; + for (i = 0; i < 4; i++) + vals[i] = sign_extend32(le16_to_cpu(raw_vals[i]), 15); + *val_len = 4; + return IIO_VAL_INT_MULTIPLE; + case IIO_CHAN_INFO_SCALE: + /* Table 3-31: 1 quaternion = 2^14 LSB */ + if (size < 2) + return -EINVAL; + vals[0] = 1; + vals[1] = 14; + return IIO_VAL_FRACTIONAL_LOG2; + default: + return -EINVAL; + } +} + +static bool bno055_is_chan_readable(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan) +{ + struct bno055_priv *priv = iio_priv(indio_dev); + + if (priv->operation_mode != BNO055_OPR_MODE_AMG) + return true; + + switch (chan->type) { + case IIO_GRAVITY: + case IIO_ROT: + return false; + case IIO_ACCEL: + if (chan->channel2 == IIO_MOD_LINEAR_X || + chan->channel2 == IIO_MOD_LINEAR_Y || + chan->channel2 == IIO_MOD_LINEAR_Z) + return false; + return true; + default: + return true; + } +} + +static int _bno055_read_raw_multi(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int size, int *vals, int *val_len, + long mask) +{ + if (!bno055_is_chan_readable(indio_dev, chan)) + return -EBUSY; + + switch (chan->type) { + case IIO_MAGN: + case IIO_ACCEL: + case IIO_ANGL_VEL: + case IIO_GRAVITY: + if (size < 2) + return -EINVAL; + *val_len = 2; + return bno055_read_simple_chan(indio_dev, chan, + &vals[0], &vals[1], + mask); + case IIO_TEMP: + *val_len = 1; + return bno055_read_temp_chan(indio_dev, &vals[0]); + case IIO_ROT: + /* + * Rotation is exposed as either a quaternion or three + * Euler angles. + */ + if (chan->channel2 == IIO_MOD_QUATERNION) + return bno055_read_quaternion(indio_dev, chan, + size, vals, + val_len, mask); + if (size < 2) + return -EINVAL; + *val_len = 2; + return bno055_read_simple_chan(indio_dev, chan, + &vals[0], &vals[1], + mask); + default: + return -EINVAL; + } +} + +static int bno055_read_raw_multi(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int size, int *vals, int *val_len, + long mask) +{ + struct bno055_priv *priv = iio_priv(indio_dev); + int ret; + + mutex_lock(&priv->lock); + ret = _bno055_read_raw_multi(indio_dev, chan, size, + vals, val_len, mask); + mutex_unlock(&priv->lock); + return ret; +} + +static int _bno055_write_raw(struct iio_dev *iio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct bno055_priv *priv = iio_priv(iio_dev); + + switch (chan->type) { + case IIO_MAGN: + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + return bno055_set_regmask(priv, val, val2, + BNO055_MAG_CONFIG_REG, + BNO055_MAG_CONFIG_ODR_MASK, + &bno055_mag_odr); + default: + return -EINVAL; + } + case IIO_ACCEL: + switch (mask) { + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: + return bno055_set_regmask(priv, val, val2, + BNO055_ACC_CONFIG_REG, + BNO055_ACC_CONFIG_LPF_MASK, + &bno055_acc_lpf); + + default: + return -EINVAL; + } + case IIO_ANGL_VEL: + switch (mask) { + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: + return bno055_set_regmask(priv, val, val2, + BNO055_GYR_CONFIG_REG, + BNO055_GYR_CONFIG_LPF_MASK, + &bno055_gyr_lpf); + case IIO_CHAN_INFO_SCALE: + return bno055_set_regmask(priv, val, val2, + BNO055_GYR_CONFIG_REG, + BNO055_GYR_CONFIG_RANGE_MASK, + &bno055_gyr_scale); + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +static int bno055_write_raw(struct iio_dev *iio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct bno055_priv *priv = iio_priv(iio_dev); + int ret; + + mutex_lock(&priv->lock); + ret = _bno055_write_raw(iio_dev, chan, val, val2, mask); + mutex_unlock(&priv->lock); + + return ret; +} + +static ssize_t in_accel_range_raw_available_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev)); + int len = 0; + int i; + + if (priv->operation_mode != BNO055_OPR_MODE_AMG) + return sysfs_emit(buf, "%d\n", bno055_acc_range.fusion_vals[0]); + + for (i = 0; i < bno055_acc_range.len; i++) + len += sysfs_emit_at(buf, len, "%d ", bno055_acc_range.vals[i]); + buf[len - 1] = '\n'; + + return len; +} + +static ssize_t fusion_enable_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev)); + + return sysfs_emit(buf, "%d\n", + priv->operation_mode != BNO055_OPR_MODE_AMG); +} + +static ssize_t fusion_enable_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct bno055_priv *priv = iio_priv(indio_dev); + bool en; + int ret; + + if (indio_dev->active_scan_mask && + !bitmap_empty(indio_dev->active_scan_mask, _BNO055_SCAN_MAX)) + return -EBUSY; + + ret = kstrtobool(buf, &en); + if (ret) + return -EINVAL; + + if (!en) + return bno055_operation_mode_set(priv, BNO055_OPR_MODE_AMG) ?: len; + + /* + * Coming from AMG means the FMC was off, just switch to fusion but + * don't change anything that doesn't belong to us (i.e let FMC stay off). + * Coming from any other fusion mode means we don't need to do anything. + */ + if (priv->operation_mode == BNO055_OPR_MODE_AMG) + return bno055_operation_mode_set(priv, BNO055_OPR_MODE_FUSION_FMC_OFF) ?: len; + + return len; +} + +static ssize_t in_magn_calibration_fast_enable_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev)); + + return sysfs_emit(buf, "%d\n", + priv->operation_mode == BNO055_OPR_MODE_FUSION); +} + +static ssize_t in_magn_calibration_fast_enable_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct bno055_priv *priv = iio_priv(indio_dev); + int ret; + + if (indio_dev->active_scan_mask && + !bitmap_empty(indio_dev->active_scan_mask, _BNO055_SCAN_MAX)) + return -EBUSY; + + if (sysfs_streq(buf, "0")) { + if (priv->operation_mode == BNO055_OPR_MODE_FUSION) { + ret = bno055_operation_mode_set(priv, BNO055_OPR_MODE_FUSION_FMC_OFF); + if (ret) + return ret; + } + } else { + if (priv->operation_mode == BNO055_OPR_MODE_AMG) + return -EINVAL; + + if (priv->operation_mode != BNO055_OPR_MODE_FUSION) { + ret = bno055_operation_mode_set(priv, BNO055_OPR_MODE_FUSION); + if (ret) + return ret; + } + } + + return len; +} + +static ssize_t in_accel_range_raw_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev)); + int val; + int ret; + + ret = bno055_get_regmask(priv, &val, NULL, + BNO055_ACC_CONFIG_REG, + BNO055_ACC_CONFIG_RANGE_MASK, + &bno055_acc_range); + if (ret < 0) + return ret; + + return sysfs_emit(buf, "%d\n", val); +} + +static ssize_t in_accel_range_raw_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev)); + unsigned long val; + int ret; + + ret = kstrtoul(buf, 10, &val); + if (ret) + return ret; + + mutex_lock(&priv->lock); + ret = bno055_set_regmask(priv, val, 0, + BNO055_ACC_CONFIG_REG, + BNO055_ACC_CONFIG_RANGE_MASK, + &bno055_acc_range); + mutex_unlock(&priv->lock); + + return ret ?: len; +} + +static ssize_t bno055_get_calib_status(struct device *dev, char *buf, int which) +{ + struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev)); + int calib; + int ret; + int val; + + if (priv->operation_mode == BNO055_OPR_MODE_AMG || + (priv->operation_mode == BNO055_OPR_MODE_FUSION_FMC_OFF && + which == BNO055_CALIB_STAT_MAGN_SHIFT)) { + calib = 0; + } else { + mutex_lock(&priv->lock); + ret = regmap_read(priv->regmap, BNO055_CALIB_STAT_REG, &val); + mutex_unlock(&priv->lock); + + if (ret) + return -EIO; + + calib = ((val >> which) & GENMASK(1, 0)) + 1; + } + + return sysfs_emit(buf, "%d\n", calib); +} + +static ssize_t serialnumber_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev)); + + return sysfs_emit(buf, "%*ph\n", BNO055_UID_LEN, priv->uid); +} + +static ssize_t calibration_data_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, + loff_t pos, size_t count) +{ + struct bno055_priv *priv = iio_priv(dev_to_iio_dev(kobj_to_dev(kobj))); + u8 data[BNO055_CALDATA_LEN]; + int ret; + + /* + * Calibration data is volatile; reading it in chunks will possibly + * results in inconsistent data. We require the user to read the whole + * blob in a single chunk + */ + if (count < BNO055_CALDATA_LEN || pos) + return -EINVAL; + + mutex_lock(&priv->lock); + ret = bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_CONFIG); + if (ret) + goto exit_unlock; + + ret = regmap_bulk_read(priv->regmap, BNO055_CALDATA_START, data, + BNO055_CALDATA_LEN); + if (ret) + goto exit_unlock; + + ret = bno055_operation_mode_do_set(priv, priv->operation_mode); + if (ret) + goto exit_unlock; + + memcpy(buf, data, BNO055_CALDATA_LEN); + + ret = BNO055_CALDATA_LEN; +exit_unlock: + mutex_unlock(&priv->lock); + return ret; +} + +static ssize_t sys_calibration_auto_status_show(struct device *dev, + struct device_attribute *a, + char *buf) +{ + return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_SYS_SHIFT); +} + +static ssize_t in_accel_calibration_auto_status_show(struct device *dev, + struct device_attribute *a, + char *buf) +{ + return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_ACCEL_SHIFT); +} + +static ssize_t in_gyro_calibration_auto_status_show(struct device *dev, + struct device_attribute *a, + char *buf) +{ + return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_GYRO_SHIFT); +} + +static ssize_t in_magn_calibration_auto_status_show(struct device *dev, + struct device_attribute *a, + char *buf) +{ + return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_MAGN_SHIFT); +} + +static int bno055_debugfs_reg_access(struct iio_dev *iio_dev, unsigned int reg, + unsigned int writeval, unsigned int *readval) +{ + struct bno055_priv *priv = iio_priv(iio_dev); + + if (readval) + return regmap_read(priv->regmap, reg, readval); + else + return regmap_write(priv->regmap, reg, writeval); +} + +static ssize_t bno055_show_fw_version(struct file *file, char __user *userbuf, + size_t count, loff_t *ppos) +{ + struct bno055_priv *priv = file->private_data; + int rev, ver; + char *buf; + int ret; + + ret = regmap_read(priv->regmap, BNO055_SW_REV_LSB_REG, &rev); + if (ret) + return ret; + + ret = regmap_read(priv->regmap, BNO055_SW_REV_MSB_REG, &ver); + if (ret) + return ret; + + buf = kasprintf(GFP_KERNEL, "ver: 0x%x, rev: 0x%x\n", ver, rev); + if (!buf) + return -ENOMEM; + + ret = simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf)); + kfree(buf); + + return ret; +} + +static const struct file_operations bno055_fw_version_ops = { + .open = simple_open, + .read = bno055_show_fw_version, + .llseek = default_llseek, + .owner = THIS_MODULE, +}; + +static void bno055_debugfs_remove(void *_priv) +{ + struct bno055_priv *priv = _priv; + + debugfs_remove(priv->debugfs); + priv->debugfs = NULL; +} + +static void bno055_debugfs_init(struct iio_dev *iio_dev) +{ + struct bno055_priv *priv = iio_priv(iio_dev); + + priv->debugfs = debugfs_create_file("firmware_version", 0400, + iio_get_debugfs_dentry(iio_dev), + priv, &bno055_fw_version_ops); + if (!IS_ERR(priv->debugfs)) + devm_add_action_or_reset(priv->dev, bno055_debugfs_remove, + priv); + if (IS_ERR_OR_NULL(priv->debugfs)) + dev_warn(priv->dev, "failed to setup debugfs"); +} + +static IIO_DEVICE_ATTR_RW(fusion_enable, 0); +static IIO_DEVICE_ATTR_RW(in_magn_calibration_fast_enable, 0); +static IIO_DEVICE_ATTR_RW(in_accel_range_raw, 0); + +static IIO_DEVICE_ATTR_RO(in_accel_range_raw_available, 0); +static IIO_DEVICE_ATTR_RO(sys_calibration_auto_status, 0); +static IIO_DEVICE_ATTR_RO(in_accel_calibration_auto_status, 0); +static IIO_DEVICE_ATTR_RO(in_gyro_calibration_auto_status, 0); +static IIO_DEVICE_ATTR_RO(in_magn_calibration_auto_status, 0); +static IIO_DEVICE_ATTR_RO(serialnumber, 0); + +static struct attribute *bno055_attrs[] = { + &iio_dev_attr_in_accel_range_raw_available.dev_attr.attr, + &iio_dev_attr_in_accel_range_raw.dev_attr.attr, + &iio_dev_attr_fusion_enable.dev_attr.attr, + &iio_dev_attr_in_magn_calibration_fast_enable.dev_attr.attr, + &iio_dev_attr_sys_calibration_auto_status.dev_attr.attr, + &iio_dev_attr_in_accel_calibration_auto_status.dev_attr.attr, + &iio_dev_attr_in_gyro_calibration_auto_status.dev_attr.attr, + &iio_dev_attr_in_magn_calibration_auto_status.dev_attr.attr, + &iio_dev_attr_serialnumber.dev_attr.attr, + NULL +}; + +static BIN_ATTR_RO(calibration_data, BNO055_CALDATA_LEN); + +static struct bin_attribute *bno055_bin_attrs[] = { + &bin_attr_calibration_data, + NULL +}; + +static const struct attribute_group bno055_attrs_group = { + .attrs = bno055_attrs, + .bin_attrs = bno055_bin_attrs, +}; + +static const struct iio_info bno055_info = { + .read_raw_multi = bno055_read_raw_multi, + .read_avail = bno055_read_avail, + .write_raw = bno055_write_raw, + .attrs = &bno055_attrs_group, + .debugfs_reg_access = bno055_debugfs_reg_access, +}; + +/* + * Reads len samples from the HW, stores them in buf starting from buf_idx, + * and applies mask to cull (skip) unneeded samples. + * Updates buf_idx incrementing with the number of stored samples. + * Samples from HW are transferred into buf, then in-place copy on buf is + * performed in order to cull samples that need to be skipped. + * This avoids copies of the first samples until we hit the 1st sample to skip, + * and also avoids having an extra bounce buffer. + * buf must be able to contain len elements in spite of how many samples we are + * going to cull. + */ +static int bno055_scan_xfer(struct bno055_priv *priv, + int start_ch, int len, unsigned long mask, + __le16 *buf, int *buf_idx) +{ + const int base = BNO055_ACC_DATA_X_LSB_REG; + bool quat_in_read = false; + int buf_base = *buf_idx; + __le16 *dst, *src; + int offs_fixup = 0; + int xfer_len = len; + int ret; + int i, n; + + if (!mask) + return 0; + + /* + * All channels are made up 1 16-bit sample, except for quaternion that + * is made up 4 16-bit values. + * For us the quaternion CH is just like 4 regular CHs. + * If our read starts past the quaternion make sure to adjust the + * starting offset; if the quaternion is contained in our scan then make + * sure to adjust the read len. + */ + if (start_ch > BNO055_SCAN_QUATERNION) { + start_ch += 3; + } else if ((start_ch <= BNO055_SCAN_QUATERNION) && + ((start_ch + len) > BNO055_SCAN_QUATERNION)) { + quat_in_read = true; + xfer_len += 3; + } + + ret = regmap_bulk_read(priv->regmap, + base + start_ch * sizeof(__le16), + buf + buf_base, + xfer_len * sizeof(__le16)); + if (ret) + return ret; + + for_each_set_bit(i, &mask, len) { + if (quat_in_read && ((start_ch + i) > BNO055_SCAN_QUATERNION)) + offs_fixup = 3; + + dst = buf + *buf_idx; + src = buf + buf_base + offs_fixup + i; + + n = (start_ch + i == BNO055_SCAN_QUATERNION) ? 4 : 1; + + if (dst != src) + memcpy(dst, src, n * sizeof(__le16)); + + *buf_idx += n; + } + return 0; +} + +static irqreturn_t bno055_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *iio_dev = pf->indio_dev; + struct bno055_priv *priv = iio_priv(iio_dev); + int xfer_start, start, end, prev_end; + unsigned long mask; + int quat_extra_len; + bool first = true; + int buf_idx = 0; + bool thr_hit; + int ret; + + mutex_lock(&priv->lock); + + /* + * Walk the bitmap and eventually perform several transfers. + * Bitmap ones-fields that are separated by gaps <= xfer_burst_break_thr + * will be included in same transfer. + * Every time the bitmap contains a gap wider than xfer_burst_break_thr + * then we split the transfer, skipping the gap. + */ + for_each_set_bitrange(start, end, iio_dev->active_scan_mask, + iio_dev->masklength) { + /* + * First transfer will start from the beginning of the first + * ones-field in the bitmap + */ + if (first) { + xfer_start = start; + } else { + /* + * We found the next ones-field; check whether to + * include it in * the current transfer or not (i.e. + * let's perform the current * transfer and prepare for + * another one). + */ + + /* + * In case the zeros-gap contains the quaternion bit, + * then its length is actually 4 words instead of 1 + * (i.e. +3 wrt other channels). + */ + quat_extra_len = ((start > BNO055_SCAN_QUATERNION) && + (prev_end <= BNO055_SCAN_QUATERNION)) ? 3 : 0; + + /* If the gap is wider than xfer_burst_break_thr then.. */ + thr_hit = (start - prev_end + quat_extra_len) > + priv->xfer_burst_break_thr; + + /* + * .. transfer all the data up to the gap. Then set the + * next transfer start index at right after the gap + * (i.e. at the start of this ones-field). + */ + if (thr_hit) { + mask = *iio_dev->active_scan_mask >> xfer_start; + ret = bno055_scan_xfer(priv, xfer_start, + prev_end - xfer_start, + mask, priv->buf.chans, &buf_idx); + if (ret) + goto done; + xfer_start = start; + } + } + first = false; + prev_end = end; + } + + /* + * We finished walking the bitmap; no more gaps to check for. Just + * perform the current transfer. + */ + mask = *iio_dev->active_scan_mask >> xfer_start; + ret = bno055_scan_xfer(priv, xfer_start, + prev_end - xfer_start, + mask, priv->buf.chans, &buf_idx); + + if (!ret) + iio_push_to_buffers_with_timestamp(iio_dev, + &priv->buf, pf->timestamp); +done: + mutex_unlock(&priv->lock); + iio_trigger_notify_done(iio_dev->trig); + return IRQ_HANDLED; +} + +static int bno055_buffer_preenable(struct iio_dev *indio_dev) +{ + struct bno055_priv *priv = iio_priv(indio_dev); + const unsigned long fusion_mask = + BIT(BNO055_SCAN_YAW) | + BIT(BNO055_SCAN_ROLL) | + BIT(BNO055_SCAN_PITCH) | + BIT(BNO055_SCAN_QUATERNION) | + BIT(BNO055_SCAN_LIA_X) | + BIT(BNO055_SCAN_LIA_Y) | + BIT(BNO055_SCAN_LIA_Z) | + BIT(BNO055_SCAN_GRAVITY_X) | + BIT(BNO055_SCAN_GRAVITY_Y) | + BIT(BNO055_SCAN_GRAVITY_Z); + + if (priv->operation_mode == BNO055_OPR_MODE_AMG && + bitmap_intersects(indio_dev->active_scan_mask, &fusion_mask, + _BNO055_SCAN_MAX)) + return -EBUSY; + return 0; +} + +static const struct iio_buffer_setup_ops bno055_buffer_setup_ops = { + .preenable = bno055_buffer_preenable, +}; + +int bno055_probe(struct device *dev, struct regmap *regmap, + int xfer_burst_break_thr, bool sw_reset) +{ + const struct firmware *caldata = NULL; + struct bno055_priv *priv; + struct iio_dev *iio_dev; + char *fw_name_buf; + unsigned int val; + int rev, ver; + int ret; + + iio_dev = devm_iio_device_alloc(dev, sizeof(*priv)); + if (!iio_dev) + return -ENOMEM; + + iio_dev->name = "bno055"; + priv = iio_priv(iio_dev); + mutex_init(&priv->lock); + priv->regmap = regmap; + priv->dev = dev; + priv->xfer_burst_break_thr = xfer_burst_break_thr; + priv->sw_reset = sw_reset; + + priv->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(priv->reset_gpio)) + return dev_err_probe(dev, PTR_ERR(priv->reset_gpio), "Failed to get reset GPIO\n"); + + priv->clk = devm_clk_get_optional_enabled(dev, "clk"); + if (IS_ERR(priv->clk)) + return dev_err_probe(dev, PTR_ERR(priv->clk), "Failed to get CLK\n"); + + if (priv->reset_gpio) { + usleep_range(5000, 10000); + gpiod_set_value_cansleep(priv->reset_gpio, 1); + usleep_range(650000, 750000); + } else if (!sw_reset) { + dev_warn(dev, "No usable reset method; IMU may be unreliable\n"); + } + + ret = regmap_read(priv->regmap, BNO055_CHIP_ID_REG, &val); + if (ret) + return ret; + + if (val != BNO055_CHIP_ID_MAGIC) + dev_warn(dev, "Unrecognized chip ID 0x%x\n", val); + + /* + * In case we haven't a HW reset pin, we can still reset the chip via + * register write. This is probably nonsense in case we can't even + * communicate with the chip or the chip isn't the one we expect (i.e. + * we don't write to unknown chips), so we perform SW reset only after + * chip magic ID check + */ + if (!priv->reset_gpio) { + ret = bno055_system_reset(priv); + if (ret) + return ret; + } + + ret = regmap_read(priv->regmap, BNO055_SW_REV_LSB_REG, &rev); + if (ret) + return ret; + + ret = regmap_read(priv->regmap, BNO055_SW_REV_MSB_REG, &ver); + if (ret) + return ret; + + /* + * The stock FW version contains a bug (see comment at the beginning of + * this file) that causes the anglvel scale to be changed depending on + * the chip range setting. We workaround this, but we don't know what + * other FW versions might do. + */ + if (ver != 0x3 || rev != 0x11) + dev_warn(dev, "Untested firmware version. Anglvel scale may not work as expected\n"); + + ret = regmap_bulk_read(priv->regmap, BNO055_UID_LOWER_REG, + priv->uid, BNO055_UID_LEN); + if (ret) + return ret; + + /* Sensor calibration data */ + fw_name_buf = kasprintf(GFP_KERNEL, BNO055_FW_UID_FMT, + BNO055_UID_LEN, priv->uid); + if (!fw_name_buf) + return -ENOMEM; + + ret = request_firmware(&caldata, fw_name_buf, dev); + kfree(fw_name_buf); + if (ret) + ret = request_firmware(&caldata, BNO055_FW_GENERIC_NAME, dev); + if (ret) { + dev_notice(dev, "Calibration file load failed. See instruction in kernel Documentation/iio/bno055.rst\n"); + ret = bno055_init(priv, NULL, 0); + } else { + ret = bno055_init(priv, caldata->data, caldata->size); + release_firmware(caldata); + } + if (ret) + return ret; + + priv->operation_mode = BNO055_OPR_MODE_FUSION; + ret = bno055_operation_mode_do_set(priv, priv->operation_mode); + if (ret) + return ret; + + ret = devm_add_action_or_reset(dev, bno055_uninit, priv); + if (ret) + return ret; + + iio_dev->channels = bno055_channels; + iio_dev->num_channels = ARRAY_SIZE(bno055_channels); + iio_dev->info = &bno055_info; + iio_dev->modes = INDIO_DIRECT_MODE; + + ret = devm_iio_triggered_buffer_setup(dev, iio_dev, + iio_pollfunc_store_time, + bno055_trigger_handler, + &bno055_buffer_setup_ops); + if (ret) + return ret; + + ret = devm_iio_device_register(dev, iio_dev); + if (ret) + return ret; + + bno055_debugfs_init(iio_dev); + + return 0; +} +EXPORT_SYMBOL_NS_GPL(bno055_probe, IIO_BNO055); + +MODULE_AUTHOR("Andrea Merello <andrea.merello@iit.it>"); +MODULE_DESCRIPTION("Bosch BNO055 driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/imu/bno055/bno055.h b/drivers/iio/imu/bno055/bno055.h new file mode 100644 index 000000000000..64f9fc95cebc --- /dev/null +++ b/drivers/iio/imu/bno055/bno055.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef __BNO055_H__ +#define __BNO055_H__ + +#include <linux/regmap.h> +#include <linux/types.h> + +struct device; +int bno055_probe(struct device *dev, struct regmap *regmap, + int xfer_burst_break_thr, bool sw_reset); +extern const struct regmap_config bno055_regmap_config; + +#endif diff --git a/drivers/iio/imu/bno055/bno055_i2c.c b/drivers/iio/imu/bno055/bno055_i2c.c new file mode 100644 index 000000000000..c1bbc0fe34f9 --- /dev/null +++ b/drivers/iio/imu/bno055/bno055_i2c.c @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Support for I2C-interfaced Bosch BNO055 IMU. + * + * Copyright (C) 2021-2022 Istituto Italiano di Tecnologia + * Electronic Design Laboratory + * Written by Andrea Merello <andrea.merello@iit.it> + */ + +#include <linux/i2c.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/regmap.h> + +#include "bno055.h" + +#define BNO055_I2C_XFER_BURST_BREAK_THRESHOLD 3 + +static int bno055_i2c_probe(struct i2c_client *client) +{ + struct regmap *regmap; + + regmap = devm_regmap_init_i2c(client, &bno055_regmap_config); + if (IS_ERR(regmap)) + return dev_err_probe(&client->dev, PTR_ERR(regmap), + "Unable to init register map"); + + return bno055_probe(&client->dev, regmap, + BNO055_I2C_XFER_BURST_BREAK_THRESHOLD, true); +} + +static const struct i2c_device_id bno055_i2c_id[] = { + {"bno055", 0}, + { } +}; +MODULE_DEVICE_TABLE(i2c, bno055_i2c_id); + +static const struct of_device_id __maybe_unused bno055_i2c_of_match[] = { + { .compatible = "bosch,bno055" }, + { } +}; +MODULE_DEVICE_TABLE(of, bno055_i2c_of_match); + +static struct i2c_driver bno055_driver = { + .driver = { + .name = "bno055-i2c", + .of_match_table = bno055_i2c_of_match, + }, + .probe_new = bno055_i2c_probe, + .id_table = bno055_i2c_id, +}; +module_i2c_driver(bno055_driver); + +MODULE_AUTHOR("Andrea Merello"); +MODULE_DESCRIPTION("Bosch BNO055 I2C interface"); +MODULE_IMPORT_NS(IIO_BNO055); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/imu/bno055/bno055_ser_core.c b/drivers/iio/imu/bno055/bno055_ser_core.c new file mode 100644 index 000000000000..57728a568471 --- /dev/null +++ b/drivers/iio/imu/bno055/bno055_ser_core.c @@ -0,0 +1,560 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Serial line interface for Bosh BNO055 IMU (via serdev). + * This file implements serial communication up to the register read/write + * level. + * + * Copyright (C) 2021-2022 Istituto Italiano di Tecnologia + * Electronic Design Laboratory + * Written by Andrea Merello <andrea.merello@iit.it> + * + * This driver is based on + * Plantower PMS7003 particulate matter sensor driver + * Which is + * Copyright (c) Tomasz Duszynski <tduszyns@gmail.com> + */ + +#include <linux/completion.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/regmap.h> +#include <linux/serdev.h> + +#include "bno055_ser_trace.h" +#include "bno055.h" + +/* + * Register writes cmd have the following format + * +------+------+-----+-----+----- ... ----+ + * | 0xAA | 0xOO | REG | LEN | payload[LEN] | + * +------+------+-----+-----+----- ... ----+ + * + * Register write responses have the following format + * +------+----------+ + * | 0xEE | ERROCODE | + * +------+----------+ + * + * .. except when writing the SYS_RST bit (i.e. triggering a system reset); in + * case the IMU accepts the command, then it resets without responding. We don't + * handle this (yet) here (so we inform the common bno055 code not to perform + * sw resets - bno055 on serial bus basically requires the hw reset pin). + * + * Register read have the following format + * +------+------+-----+-----+ + * | 0xAA | 0xO1 | REG | LEN | + * +------+------+-----+-----+ + * + * Successful register read response have the following format + * +------+-----+----- ... ----+ + * | 0xBB | LEN | payload[LEN] | + * +------+-----+----- ... ----+ + * + * Failed register read response have the following format + * +------+--------+ + * | 0xEE | ERRCODE| (ERRCODE always > 1) + * +------+--------+ + * + * Error codes are + * 01: OK + * 02: read/write FAIL + * 04: invalid address + * 05: write on RO + * 06: wrong start byte + * 07: bus overrun + * 08: len too high + * 09: len too low + * 10: bus RX byte timeout (timeout is 30mS) + * + * + * **WORKAROUND ALERT** + * + * Serial communication seems very fragile: the BNO055 buffer seems to overflow + * very easy; BNO055 seems able to sink few bytes, then it needs a brief pause. + * On the other hand, it is also picky on timeout: if there is a pause > 30mS in + * between two bytes then the transaction fails (IMU internal RX FSM resets). + * + * BNO055 has been seen also failing to process commands in case we send them + * too close each other (or if it is somehow busy?) + * + * In particular I saw these scenarios: + * 1) If we send 2 bytes per time, then the IMU never(?) overflows. + * 2) If we send 4 bytes per time (i.e. the full header), then the IMU could + * overflow, but it seem to sink all 4 bytes, then it returns error. + * 3) If we send more than 4 bytes, the IMU could overflow, and I saw it sending + * error after 4 bytes are sent; we have troubles in synchronizing again, + * because we are still sending data, and the IMU interprets it as the 1st + * byte of a new command. + * + * While we must avoid case 3, we could send 4 bytes per time and eventually + * retry in case of failure; this seemed convenient for reads (which requires + * TXing exactly 4 bytes), however it has been seen that, depending by the IMU + * settings (e.g. LPF), failures became less or more frequent; in certain IMU + * configurations they are very rare, but in certain others we keeps failing + * even after like 30 retries. + * + * So, we just split TXes in [2-bytes + delay] steps, and still keep an eye on + * the IMU response; in case it overflows (which is now unlikely), we retry. + */ + +/* + * Read operation overhead: + * 4 bytes req + 2byte resp hdr. + * 6 bytes = 60 bit (considering 1start + 1stop bits). + * 60/115200 = ~520uS + about 2500mS delay -> ~3mS + * In 3mS we could read back about 34 bytes that means 17 samples, this means + * that in case of scattered reads in which the gap is 17 samples or less it is + * still convenient to go for a burst. + * We have to take into account also IMU response time - IMU seems to be often + * reasonably quick to respond, but sometimes it seems to be in some "critical + * section" in which it delays handling of serial protocol. Because of this we + * round-up to 22, which is the max number of samples, always bursting indeed. + */ +#define BNO055_SER_XFER_BURST_BREAK_THRESHOLD 22 + +struct bno055_ser_priv { + enum { + CMD_NONE, + CMD_READ, + CMD_WRITE, + } expect_response; + int expected_data_len; + u8 *response_buf; + + /** + * enum cmd_status - represent the status of a command sent to the HW. + * @STATUS_CRIT: The command failed: the serial communication failed. + * @STATUS_OK: The command executed successfully. + * @STATUS_FAIL: The command failed: HW responded with an error. + */ + enum { + STATUS_CRIT = -1, + STATUS_OK = 0, + STATUS_FAIL = 1, + } cmd_status; + + /* + * Protects all the above fields, which are accessed in behalf of both + * the serdev RX callback and the regmap side + */ + struct mutex lock; + + /* Only accessed in serdev RX callback context*/ + struct { + enum { + RX_IDLE, + RX_START, + RX_DATA, + } state; + int databuf_count; + int expected_len; + int type; + } rx; + + /* Never accessed in behalf of serdev RX callback context */ + bool cmd_stale; + + struct completion cmd_complete; + struct serdev_device *serdev; +}; + +static int bno055_ser_send_chunk(struct bno055_ser_priv *priv, const u8 *data, int len) +{ + int ret; + + trace_send_chunk(len, data); + ret = serdev_device_write(priv->serdev, data, len, msecs_to_jiffies(25)); + if (ret < 0) + return ret; + + if (ret < len) + return -EIO; + + return 0; +} + +/* + * Send a read or write command. + * 'data' can be NULL (used in read case). 'len' parameter is always valid; in + * case 'data' is non-NULL then it must match 'data' size. + */ +static int bno055_ser_do_send_cmd(struct bno055_ser_priv *priv, + bool read, int addr, int len, const u8 *data) +{ + u8 hdr[] = {0xAA, read, addr, len}; + int chunk_len; + int ret; + + ret = bno055_ser_send_chunk(priv, hdr, 2); + if (ret) + goto fail; + usleep_range(2000, 3000); + ret = bno055_ser_send_chunk(priv, hdr + 2, 2); + if (ret) + goto fail; + + if (read) + return 0; + + while (len) { + chunk_len = min(len, 2); + usleep_range(2000, 3000); + ret = bno055_ser_send_chunk(priv, data, chunk_len); + if (ret) + goto fail; + data += chunk_len; + len -= chunk_len; + } + + return 0; +fail: + /* waiting more than 30mS should clear the BNO055 internal state */ + usleep_range(40000, 50000); + return ret; +} + +static int bno055_ser_send_cmd(struct bno055_ser_priv *priv, + bool read, int addr, int len, const u8 *data) +{ + const int retry_max = 5; + int retry = retry_max; + int ret = 0; + + /* + * In case previous command was interrupted we still need to wait it to + * complete before we can issue new commands + */ + if (priv->cmd_stale) { + ret = wait_for_completion_interruptible_timeout(&priv->cmd_complete, + msecs_to_jiffies(100)); + if (ret == -ERESTARTSYS) + return -ERESTARTSYS; + + priv->cmd_stale = false; + /* if serial protocol broke, bail out */ + if (priv->cmd_status == STATUS_CRIT) + return -EIO; + } + + /* + * Try to convince the IMU to cooperate.. as explained in the comments + * at the top of this file, the IMU could also refuse the command (i.e. + * it is not ready yet); retry in this case. + */ + do { + mutex_lock(&priv->lock); + priv->expect_response = read ? CMD_READ : CMD_WRITE; + reinit_completion(&priv->cmd_complete); + mutex_unlock(&priv->lock); + + if (retry != retry_max) + trace_cmd_retry(read, addr, retry_max - retry); + ret = bno055_ser_do_send_cmd(priv, read, addr, len, data); + if (ret) + continue; + + ret = wait_for_completion_interruptible_timeout(&priv->cmd_complete, + msecs_to_jiffies(100)); + if (ret == -ERESTARTSYS) { + priv->cmd_stale = true; + return -ERESTARTSYS; + } + + if (!ret) + return -ETIMEDOUT; + + if (priv->cmd_status == STATUS_OK) + return 0; + if (priv->cmd_status == STATUS_CRIT) + return -EIO; + + /* loop in case priv->cmd_status == STATUS_FAIL */ + } while (--retry); + + if (ret < 0) + return ret; + if (priv->cmd_status == STATUS_FAIL) + return -EINVAL; + return 0; +} + +static int bno055_ser_write_reg(void *context, const void *_data, size_t count) +{ + const u8 *data = _data; + struct bno055_ser_priv *priv = context; + + if (count < 2) { + dev_err(&priv->serdev->dev, "Invalid write count %zu", count); + return -EINVAL; + } + + trace_write_reg(data[0], data[1]); + return bno055_ser_send_cmd(priv, 0, data[0], count - 1, data + 1); +} + +static int bno055_ser_read_reg(void *context, + const void *_reg, size_t reg_size, + void *val, size_t val_size) +{ + int ret; + int reg_addr; + const u8 *reg = _reg; + struct bno055_ser_priv *priv = context; + + if (val_size > 128) { + dev_err(&priv->serdev->dev, "Invalid read valsize %zu", val_size); + return -EINVAL; + } + + reg_addr = *reg; + trace_read_reg(reg_addr, val_size); + mutex_lock(&priv->lock); + priv->expected_data_len = val_size; + priv->response_buf = val; + mutex_unlock(&priv->lock); + + ret = bno055_ser_send_cmd(priv, 1, reg_addr, val_size, NULL); + + mutex_lock(&priv->lock); + priv->response_buf = NULL; + mutex_unlock(&priv->lock); + + return ret; +} + +/* + * Handler for received data; this is called from the receiver callback whenever + * it got some packet from the serial bus. The status tells us whether the + * packet is valid (i.e. header ok && received payload len consistent wrt the + * header). It's now our responsibility to check whether this is what we + * expected, of whether we got some unexpected, yet valid, packet. + */ +static void bno055_ser_handle_rx(struct bno055_ser_priv *priv, int status) +{ + mutex_lock(&priv->lock); + switch (priv->expect_response) { + case CMD_NONE: + dev_warn(&priv->serdev->dev, "received unexpected, yet valid, data from sensor"); + mutex_unlock(&priv->lock); + return; + + case CMD_READ: + priv->cmd_status = status; + if (status == STATUS_OK && + priv->rx.databuf_count != priv->expected_data_len) { + /* + * If we got here, then the lower layer serial protocol + * seems consistent with itself; if we got an unexpected + * amount of data then signal it as a non critical error + */ + priv->cmd_status = STATUS_FAIL; + dev_warn(&priv->serdev->dev, + "received an unexpected amount of, yet valid, data from sensor"); + } + break; + + case CMD_WRITE: + priv->cmd_status = status; + break; + } + + priv->expect_response = CMD_NONE; + mutex_unlock(&priv->lock); + complete(&priv->cmd_complete); +} + +/* + * Serdev receiver FSM. This tracks the serial communication and parse the + * header. It pushes packets to bno055_ser_handle_rx(), eventually communicating + * failures (i.e. malformed packets). + * Ideally it doesn't know anything about upper layer (i.e. if this is the + * packet we were really expecting), but since we copies the payload into the + * receiver buffer (that is not valid when i.e. we don't expect data), we + * snoop a bit in the upper layer.. + * Also, we assume to RX one pkt per time (i.e. the HW doesn't send anything + * unless we require to AND we don't queue more than one request per time). + */ +static int bno055_ser_receive_buf(struct serdev_device *serdev, + const unsigned char *buf, size_t size) +{ + int status; + struct bno055_ser_priv *priv = serdev_device_get_drvdata(serdev); + int remaining = size; + + if (size == 0) + return 0; + + trace_recv(size, buf); + switch (priv->rx.state) { + case RX_IDLE: + /* + * New packet. + * Check for its 1st byte that identifies the pkt type. + */ + if (buf[0] != 0xEE && buf[0] != 0xBB) { + dev_err(&priv->serdev->dev, + "Invalid packet start %x", buf[0]); + bno055_ser_handle_rx(priv, STATUS_CRIT); + break; + } + priv->rx.type = buf[0]; + priv->rx.state = RX_START; + remaining--; + buf++; + priv->rx.databuf_count = 0; + fallthrough; + + case RX_START: + /* + * Packet RX in progress, we expect either 1-byte len or 1-byte + * status depending by the packet type. + */ + if (remaining == 0) + break; + + if (priv->rx.type == 0xEE) { + if (remaining > 1) { + dev_err(&priv->serdev->dev, "EE pkt. Extra data received"); + status = STATUS_CRIT; + } else { + status = (buf[0] == 1) ? STATUS_OK : STATUS_FAIL; + } + bno055_ser_handle_rx(priv, status); + priv->rx.state = RX_IDLE; + break; + + } else { + /*priv->rx.type == 0xBB */ + priv->rx.state = RX_DATA; + priv->rx.expected_len = buf[0]; + remaining--; + buf++; + } + fallthrough; + + case RX_DATA: + /* Header parsed; now receiving packet data payload */ + if (remaining == 0) + break; + + if (priv->rx.databuf_count + remaining > priv->rx.expected_len) { + /* + * This is an inconsistency in serial protocol, we lost + * sync and we don't know how to handle further data + */ + dev_err(&priv->serdev->dev, "BB pkt. Extra data received"); + bno055_ser_handle_rx(priv, STATUS_CRIT); + priv->rx.state = RX_IDLE; + break; + } + + mutex_lock(&priv->lock); + /* + * NULL e.g. when read cmd is stale or when no read cmd is + * actually pending. + */ + if (priv->response_buf && + /* + * Snoop on the upper layer protocol stuff to make sure not + * to write to an invalid memory. Apart for this, let's the + * upper layer manage any inconsistency wrt expected data + * len (as long as the serial protocol is consistent wrt + * itself (i.e. response header is consistent with received + * response len. + */ + (priv->rx.databuf_count + remaining <= priv->expected_data_len)) + memcpy(priv->response_buf + priv->rx.databuf_count, + buf, remaining); + mutex_unlock(&priv->lock); + + priv->rx.databuf_count += remaining; + + /* + * Reached expected len advertised by the IMU for the current + * packet. Pass it to the upper layer (for us it is just valid). + */ + if (priv->rx.databuf_count == priv->rx.expected_len) { + bno055_ser_handle_rx(priv, STATUS_OK); + priv->rx.state = RX_IDLE; + } + break; + } + + return size; +} + +static const struct serdev_device_ops bno055_ser_serdev_ops = { + .receive_buf = bno055_ser_receive_buf, + .write_wakeup = serdev_device_write_wakeup, +}; + +static struct regmap_bus bno055_ser_regmap_bus = { + .write = bno055_ser_write_reg, + .read = bno055_ser_read_reg, +}; + +static int bno055_ser_probe(struct serdev_device *serdev) +{ + struct bno055_ser_priv *priv; + struct regmap *regmap; + int ret; + + priv = devm_kzalloc(&serdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + serdev_device_set_drvdata(serdev, priv); + priv->serdev = serdev; + mutex_init(&priv->lock); + init_completion(&priv->cmd_complete); + + serdev_device_set_client_ops(serdev, &bno055_ser_serdev_ops); + ret = devm_serdev_device_open(&serdev->dev, serdev); + if (ret) + return ret; + + if (serdev_device_set_baudrate(serdev, 115200) != 115200) { + dev_err(&serdev->dev, "Cannot set required baud rate"); + return -EIO; + } + + ret = serdev_device_set_parity(serdev, SERDEV_PARITY_NONE); + if (ret) { + dev_err(&serdev->dev, "Cannot set required parity setting"); + return ret; + } + serdev_device_set_flow_control(serdev, false); + + regmap = devm_regmap_init(&serdev->dev, &bno055_ser_regmap_bus, + priv, &bno055_regmap_config); + if (IS_ERR(regmap)) + return dev_err_probe(&serdev->dev, PTR_ERR(regmap), + "Unable to init register map"); + + return bno055_probe(&serdev->dev, regmap, + BNO055_SER_XFER_BURST_BREAK_THRESHOLD, false); +} + +static const struct of_device_id bno055_ser_of_match[] = { + { .compatible = "bosch,bno055" }, + { } +}; +MODULE_DEVICE_TABLE(of, bno055_ser_of_match); + +static struct serdev_device_driver bno055_ser_driver = { + .driver = { + .name = "bno055-ser", + .of_match_table = bno055_ser_of_match, + }, + .probe = bno055_ser_probe, +}; +module_serdev_device_driver(bno055_ser_driver); + +MODULE_AUTHOR("Andrea Merello <andrea.merello@iit.it>"); +MODULE_DESCRIPTION("Bosch BNO055 serdev interface"); +MODULE_IMPORT_NS(IIO_BNO055); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/imu/bno055/bno055_ser_trace.c b/drivers/iio/imu/bno055/bno055_ser_trace.c new file mode 100644 index 000000000000..48397b66daef --- /dev/null +++ b/drivers/iio/imu/bno055/bno055_ser_trace.c @@ -0,0 +1,14 @@ +//SPDX-License-Identifier: GPL-2.0 + +/* + * bno055_ser Trace Support + * Copyright (C) 2022 Istituto Italiano di Tecnologia + * Electronic Design Laboratory + * + * Based on: + * Device core Trace Support + * Copyright (C) 2021, Intel Corporation + */ + +#define CREATE_TRACE_POINTS +#include "bno055_ser_trace.h" diff --git a/drivers/iio/imu/bno055/bno055_ser_trace.h b/drivers/iio/imu/bno055/bno055_ser_trace.h new file mode 100644 index 000000000000..7d9eae166eec --- /dev/null +++ b/drivers/iio/imu/bno055/bno055_ser_trace.h @@ -0,0 +1,104 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#if !defined(__BNO055_SERDEV_TRACE_H__) || defined(TRACE_HEADER_MULTI_READ) +#define __BNO055_SERDEV_TRACE_H__ + +#include <linux/tracepoint.h> + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM bno055_ser + +TRACE_EVENT(send_chunk, + TP_PROTO(int len, const u8 *data), + TP_ARGS(len, data), + TP_STRUCT__entry( + __field(int, len) + __dynamic_array(u8, chunk, len) + ), + TP_fast_assign( + __entry->len = len; + memcpy(__get_dynamic_array(chunk), + data, __entry->len); + ), + TP_printk("len: %d, data: = %*ph", + __entry->len, __entry->len, __get_dynamic_array(chunk) + ) +); + +TRACE_EVENT(cmd_retry, + TP_PROTO(bool read, int addr, int retry), + TP_ARGS(read, addr, retry), + TP_STRUCT__entry( + __field(bool, read) + __field(int, addr) + __field(int, retry) + ), + TP_fast_assign( + __entry->read = read; + __entry->addr = addr; + __entry->retry = retry; + ), + TP_printk("%s addr 0x%x retry #%d", + __entry->read ? "read" : "write", + __entry->addr, __entry->retry + ) +); + +TRACE_EVENT(write_reg, + TP_PROTO(u8 addr, u8 value), + TP_ARGS(addr, value), + TP_STRUCT__entry( + __field(u8, addr) + __field(u8, value) + ), + TP_fast_assign( + __entry->addr = addr; + __entry->value = value; + ), + TP_printk("reg 0x%x = 0x%x", + __entry->addr, __entry->value + ) +); + +TRACE_EVENT(read_reg, + TP_PROTO(int addr, size_t len), + TP_ARGS(addr, len), + TP_STRUCT__entry( + __field(int, addr) + __field(size_t, len) + ), + TP_fast_assign( + __entry->addr = addr; + __entry->len = len; + ), + TP_printk("reg 0x%x (len %zu)", + __entry->addr, __entry->len + ) +); + +TRACE_EVENT(recv, + TP_PROTO(size_t len, const unsigned char *buf), + TP_ARGS(len, buf), + TP_STRUCT__entry( + __field(size_t, len) + __dynamic_array(unsigned char, buf, len) + ), + TP_fast_assign( + __entry->len = len; + memcpy(__get_dynamic_array(buf), + buf, __entry->len); + ), + TP_printk("len: %zu, data: = %*ph", + __entry->len, (int)__entry->len, __get_dynamic_array(buf) + ) +); + +#endif /* __BNO055_SERDEV_TRACE_H__ || TRACE_HEADER_MULTI_READ */ + +#undef TRACE_INCLUDE_PATH +#define TRACE_INCLUDE_PATH . +#undef TRACE_INCLUDE_FILE +#define TRACE_INCLUDE_FILE bno055_ser_trace + +/* This part must be outside protection */ +#include <trace/define_trace.h> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c index 9b4298095d3f..f7bce428d9eb 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c @@ -65,7 +65,7 @@ static int asus_acpi_get_sensor_info(struct acpi_device *adev, sub_elem = &elem->package.elements[j]; if (sub_elem->type == ACPI_TYPE_STRING) - strlcpy(info->type, sub_elem->string.pointer, + strscpy(info->type, sub_elem->string.pointer, sizeof(info->type)); else if (sub_elem->type == ACPI_TYPE_INTEGER) { if (sub_elem->integer.value != client->addr) { @@ -158,7 +158,7 @@ int inv_mpu_acpi_create_mux_client(struct i2c_client *client) char *name; info.addr = secondary; - strlcpy(info.type, dev_name(&adev->dev), + strscpy(info.type, dev_name(&adev->dev), sizeof(info.type)); name = strchr(info.type, ':'); if (name) diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig index fefd0b939100..2ed2b3f40c0b 100644 --- a/drivers/iio/imu/st_lsm6dsx/Kconfig +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig @@ -12,7 +12,7 @@ config IIO_ST_LSM6DSX Say yes here to build support for STMicroelectronics LSM6DSx imu sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm, ism330dlc, lsm6dso, lsm6dsox, asm330lhh, asm330lhhx, lsm6dsr, - lsm6ds3tr-c, ism330dhcx, lsm6dsrx, lsm6ds0, lsm6dsop, + lsm6ds3tr-c, ism330dhcx, lsm6dsrx, lsm6ds0, lsm6dsop, lsm6dstx, the accelerometer/gyroscope of lsm9ds1 and lsm6dst. To compile this driver as a module, choose M here: the module diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h index a86dd29a4738..6b57d47be69e 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h @@ -32,6 +32,7 @@ #define ST_LSM6DST_DEV_NAME "lsm6dst" #define ST_LSM6DSOP_DEV_NAME "lsm6dsop" #define ST_ASM330LHHX_DEV_NAME "asm330lhhx" +#define ST_LSM6DSTX_DEV_NAME "lsm6dstx" enum st_lsm6dsx_hw_id { ST_LSM6DS3_ID, @@ -51,6 +52,7 @@ enum st_lsm6dsx_hw_id { ST_LSM6DST_ID, ST_LSM6DSOP_ID, ST_ASM330LHHX_ID, + ST_LSM6DSTX_ID, ST_LSM6DSX_MAX_ID, }; diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c index c7d3730ab1c5..e49f2d120ed3 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c @@ -15,7 +15,7 @@ * value of the decimation factor and ODR set for each FIFO data set. * * LSM6DSO/LSM6DSOX/ASM330LHH/ASM330LHHX/LSM6DSR/LSM6DSRX/ISM330DHCX/ - * LSM6DST/LSM6DSOP: + * LSM6DST/LSM6DSOP/LSM6DSTX: * The FIFO buffer can be configured to store data from gyroscope and * accelerometer. Each sample is queued with a tag (1B) indicating data * source (gyroscope, accelerometer, hw timer). diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c index b5e4a4113652..f8bbb005718e 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c @@ -26,7 +26,8 @@ * - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000 * - FIFO size: 4KB * - * - LSM6DSO/LSM6DSOX/ASM330LHH/ASM330LHHX/LSM6DSR/ISM330DHCX/LSM6DST/LSM6DSOP: + * - LSM6DSO/LSM6DSOX/ASM330LHH/ASM330LHHX/LSM6DSR/ISM330DHCX/LSM6DST/LSM6DSOP/ + * LSM6DSTX: * - Accelerometer/Gyroscope supported ODR [Hz]: 12.5, 26, 52, 104, 208, 416, * 833 * - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16 @@ -791,6 +792,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { .hw_id = ST_ASM330LHHX_ID, .name = ST_ASM330LHHX_DEV_NAME, .wai = 0x6b, + }, { + .hw_id = ST_LSM6DSTX_ID, + .name = ST_LSM6DSTX_DEV_NAME, + .wai = 0x6d, }, }, .channels = { diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c index 2ea34c0d3a8c..307c8c436862 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c @@ -105,6 +105,10 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = { .compatible = "st,asm330lhhx", .data = (void *)ST_ASM330LHHX_ID, }, + { + .compatible = "st,lsm6dstx", + .data = (void *)ST_LSM6DSTX_ID, + }, {}, }; MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match); @@ -127,6 +131,7 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = { { ST_LSM6DST_DEV_NAME, ST_LSM6DST_ID }, { ST_LSM6DSOP_DEV_NAME, ST_LSM6DSOP_ID }, { ST_ASM330LHHX_DEV_NAME, ST_ASM330LHHX_ID }, + { ST_LSM6DSTX_DEV_NAME, ST_LSM6DSTX_ID }, {}, }; MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table); diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c index 6a8883f022a8..6a4eecf4bb05 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c @@ -105,6 +105,10 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = { .compatible = "st,asm330lhhx", .data = (void *)ST_ASM330LHHX_ID, }, + { + .compatible = "st,lsm6dstx", + .data = (void *)ST_LSM6DSTX_ID, + }, {}, }; MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match); @@ -127,6 +131,7 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = { { ST_LSM6DST_DEV_NAME, ST_LSM6DST_ID }, { ST_LSM6DSOP_DEV_NAME, ST_LSM6DSOP_ID }, { ST_ASM330LHHX_DEV_NAME, ST_ASM330LHHX_ID }, + { ST_LSM6DSTX_DEV_NAME, ST_LSM6DSTX_ID }, {}, }; MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table); diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c index acc2b6c05d57..228598b82a2f 100644 --- a/drivers/iio/industrialio-buffer.c +++ b/drivers/iio/industrialio-buffer.c @@ -843,8 +843,8 @@ static int iio_verify_update(struct iio_dev *indio_dev, * to verify. */ if (remove_buffer && !insert_buffer && - list_is_singular(&iio_dev_opaque->buffer_list)) - return 0; + list_is_singular(&iio_dev_opaque->buffer_list)) + return 0; modes = indio_dev->modes; @@ -940,6 +940,7 @@ struct iio_demux_table { static void iio_buffer_demux_free(struct iio_buffer *buffer) { struct iio_demux_table *p, *q; + list_for_each_entry_safe(p, q, &buffer->demux_list, l) { list_del(&p->l); kfree(p); diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index 0f4dbda3b9d3..151ff3993354 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -134,6 +134,12 @@ static const char * const iio_modifier_names[] = { [IIO_MOD_ETHANOL] = "ethanol", [IIO_MOD_H2] = "h2", [IIO_MOD_O2] = "o2", + [IIO_MOD_LINEAR_X] = "linear_x", + [IIO_MOD_LINEAR_Y] = "linear_y", + [IIO_MOD_LINEAR_Z] = "linear_z", + [IIO_MOD_PITCH] = "pitch", + [IIO_MOD_YAW] = "yaw", + [IIO_MOD_ROLL] = "roll", }; /* relies on pairs of these shared then separate */ @@ -168,6 +174,7 @@ static const char * const iio_chan_info_postfix[] = { [IIO_CHAN_INFO_OVERSAMPLING_RATIO] = "oversampling_ratio", [IIO_CHAN_INFO_THERMOCOUPLE_TYPE] = "thermocouple_type", [IIO_CHAN_INFO_CALIBAMBIENT] = "calibambient", + [IIO_CHAN_INFO_ZEROPOINT] = "zeropoint", }; /** * iio_device_id() - query the unique ID for the device @@ -236,6 +243,7 @@ static int iio_sysfs_match_string_with_gaps(const char * const *array, size_t n, struct dentry *iio_get_debugfs_dentry(struct iio_dev *indio_dev) { struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); + return iio_dev_opaque->debugfs_dentry; } EXPORT_SYMBOL_GPL(iio_get_debugfs_dentry); @@ -447,6 +455,7 @@ static const struct file_operations iio_debugfs_reg_fops = { static void iio_device_unregister_debugfs(struct iio_dev *indio_dev) { struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); + debugfs_remove_recursive(iio_dev_opaque->debugfs_dentry); } @@ -1021,6 +1030,7 @@ int __iio_device_attr_init(struct device_attribute *dev_attr, int ret = 0; char *name = NULL; char *full_postfix; + sysfs_attr_init(&dev_attr->attr); /* Build up postfix of <extend_name>_<modifier>_postfix */ @@ -1299,8 +1309,7 @@ static int iio_device_add_channel_sysfs(struct iio_dev *indio_dev, ret = iio_device_add_info_mask_type_avail(indio_dev, chan, IIO_SEPARATE, - &chan-> - info_mask_separate_available); + &chan->info_mask_separate_available); if (ret < 0) return ret; attrcount += ret; @@ -1314,8 +1323,7 @@ static int iio_device_add_channel_sysfs(struct iio_dev *indio_dev, ret = iio_device_add_info_mask_type_avail(indio_dev, chan, IIO_SHARED_BY_TYPE, - &chan-> - info_mask_shared_by_type_available); + &chan->info_mask_shared_by_type_available); if (ret < 0) return ret; attrcount += ret; @@ -1355,6 +1363,7 @@ static int iio_device_add_channel_sysfs(struct iio_dev *indio_dev, if (chan->ext_info) { unsigned int i = 0; + for (ext_info = chan->ext_info; ext_info->name; ext_info++) { ret = __iio_add_chan_devattr(ext_info->name, chan, @@ -1403,6 +1412,7 @@ static ssize_t name_show(struct device *dev, struct device_attribute *attr, char *buf) { struct iio_dev *indio_dev = dev_to_iio_dev(dev); + return sysfs_emit(buf, "%s\n", indio_dev->name); } @@ -1412,6 +1422,7 @@ static ssize_t label_show(struct device *dev, struct device_attribute *attr, char *buf) { struct iio_dev *indio_dev = dev_to_iio_dev(dev); + return sysfs_emit(buf, "%s\n", indio_dev->label); } @@ -1565,7 +1576,7 @@ static int iio_device_register_sysfs(struct iio_dev *indio_dev) ret = -ENOMEM; goto error_clear_attrs; } - /* Copy across original attributes */ + /* Copy across original attributes, and point to original binary attributes */ if (indio_dev->info->attrs) { memcpy(iio_dev_opaque->chan_attr_group.attrs, indio_dev->info->attrs->attrs, @@ -1573,6 +1584,8 @@ static int iio_device_register_sysfs(struct iio_dev *indio_dev) *attrcount_orig); iio_dev_opaque->chan_attr_group.is_visible = indio_dev->info->attrs->is_visible; + iio_dev_opaque->chan_attr_group.bin_attrs = + indio_dev->info->attrs->bin_attrs; } attrn = attrcount_orig; /* Add all elements from the list. */ @@ -1621,6 +1634,8 @@ static void iio_dev_release(struct device *device) iio_device_detach_buffers(indio_dev); + lockdep_unregister_key(&iio_dev_opaque->mlock_key); + ida_free(&iio_ida, iio_dev_opaque->id); kfree(iio_dev_opaque); } @@ -1680,6 +1695,9 @@ struct iio_dev *iio_device_alloc(struct device *parent, int sizeof_priv) INIT_LIST_HEAD(&iio_dev_opaque->buffer_list); INIT_LIST_HEAD(&iio_dev_opaque->ioctl_handlers); + lockdep_register_key(&iio_dev_opaque->mlock_key); + lockdep_set_class(&indio_dev->mlock, &iio_dev_opaque->mlock_key); + return indio_dev; } EXPORT_SYMBOL(iio_device_alloc); @@ -1777,6 +1795,7 @@ static int iio_chrdev_release(struct inode *inode, struct file *filp) struct iio_dev_opaque *iio_dev_opaque = container_of(inode->i_cdev, struct iio_dev_opaque, chrdev); struct iio_dev *indio_dev = &iio_dev_opaque->indio_dev; + kfree(ib); clear_bit(IIO_BUSY_BIT_POS, &iio_dev_opaque->flags); iio_device_put(indio_dev); diff --git a/drivers/iio/industrialio-event.c b/drivers/iio/industrialio-event.c index b5e059e15b0a..3d78da2531a9 100644 --- a/drivers/iio/industrialio-event.c +++ b/drivers/iio/industrialio-event.c @@ -231,12 +231,15 @@ static const char * const iio_ev_type_text[] = { [IIO_EV_TYPE_MAG_ADAPTIVE] = "mag_adaptive", [IIO_EV_TYPE_CHANGE] = "change", [IIO_EV_TYPE_MAG_REFERENCED] = "mag_referenced", + [IIO_EV_TYPE_GESTURE] = "gesture", }; static const char * const iio_ev_dir_text[] = { [IIO_EV_DIR_EITHER] = "either", [IIO_EV_DIR_RISING] = "rising", - [IIO_EV_DIR_FALLING] = "falling" + [IIO_EV_DIR_FALLING] = "falling", + [IIO_EV_DIR_SINGLETAP] = "singletap", + [IIO_EV_DIR_DOUBLETAP] = "doubletap", }; static const char * const iio_ev_info_text[] = { @@ -247,6 +250,8 @@ static const char * const iio_ev_info_text[] = { [IIO_EV_INFO_HIGH_PASS_FILTER_3DB] = "high_pass_filter_3db", [IIO_EV_INFO_LOW_PASS_FILTER_3DB] = "low_pass_filter_3db", [IIO_EV_INFO_TIMEOUT] = "timeout", + [IIO_EV_INFO_RESET_TIMEOUT] = "reset_timeout", + [IIO_EV_INFO_TAP2_MIN_DELAY] = "tap2_min_delay", }; static enum iio_event_direction iio_ev_attr_dir(struct iio_dev_attr *attr) @@ -354,9 +359,10 @@ static int iio_device_add_event(struct iio_dev *indio_dev, enum iio_shared_by shared_by, const unsigned long *mask) { struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); - ssize_t (*show)(struct device *, struct device_attribute *, char *); - ssize_t (*store)(struct device *, struct device_attribute *, - const char *, size_t); + ssize_t (*show)(struct device *dev, struct device_attribute *attr, + char *buf); + ssize_t (*store)(struct device *dev, struct device_attribute *attr, + const char *buf, size_t len); unsigned int attrcount = 0; unsigned int i; char *postfix; diff --git a/drivers/iio/industrialio-trigger.c b/drivers/iio/industrialio-trigger.c index b78814d869b7..6885a186fe27 100644 --- a/drivers/iio/industrialio-trigger.c +++ b/drivers/iio/industrialio-trigger.c @@ -50,6 +50,7 @@ static ssize_t name_show(struct device *dev, struct device_attribute *attr, char *buf) { struct iio_trigger *trig = to_iio_trigger(dev); + return sysfs_emit(buf, "%s\n", trig->name); } diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c index df74765d33dc..872fd5c24147 100644 --- a/drivers/iio/inkern.c +++ b/drivers/iio/inkern.c @@ -5,9 +5,9 @@ */ #include <linux/err.h> #include <linux/export.h> +#include <linux/property.h> #include <linux/slab.h> #include <linux/mutex.h> -#include <linux/of.h> #include <linux/iio/iio.h> #include <linux/iio/iio-opaque.h> @@ -45,13 +45,13 @@ int iio_map_array_register(struct iio_dev *indio_dev, struct iio_map *maps) int i = 0, ret = 0; struct iio_map_internal *mapi; - if (maps == NULL) + if (!maps) return 0; mutex_lock(&iio_map_list_lock); - while (maps[i].consumer_dev_name != NULL) { + while (maps[i].consumer_dev_name) { mapi = kzalloc(sizeof(*mapi), GFP_KERNEL); - if (mapi == NULL) { + if (!mapi) { ret = -ENOMEM; goto error_ret; } @@ -69,7 +69,6 @@ error_ret: } EXPORT_SYMBOL_GPL(iio_map_array_register); - /* * Remove all map entries associated with the given iio device */ @@ -117,15 +116,8 @@ static const struct iio_chan_spec return chan; } -#ifdef CONFIG_OF - -static int iio_dev_node_match(struct device *dev, const void *data) -{ - return dev->of_node == data && dev->type == &iio_device_type; -} - /** - * __of_iio_simple_xlate - translate iiospec to the IIO channel index + * __fwnode_iio_simple_xlate - translate iiospec to the IIO channel index * @indio_dev: pointer to the iio_dev structure * @iiospec: IIO specifier as found in the device tree * @@ -134,14 +126,14 @@ static int iio_dev_node_match(struct device *dev, const void *data) * whether IIO index is less than num_channels (that is specified in the * iio_dev). */ -static int __of_iio_simple_xlate(struct iio_dev *indio_dev, - const struct of_phandle_args *iiospec) +static int __fwnode_iio_simple_xlate(struct iio_dev *indio_dev, + const struct fwnode_reference_args *iiospec) { - if (!iiospec->args_count) + if (!iiospec->nargs) return 0; if (iiospec->args[0] >= indio_dev->num_channels) { - dev_err(&indio_dev->dev, "invalid channel index %u\n", + dev_err(&indio_dev->dev, "invalid channel index %llu\n", iiospec->args[0]); return -EINVAL; } @@ -149,32 +141,33 @@ static int __of_iio_simple_xlate(struct iio_dev *indio_dev, return iiospec->args[0]; } -static int __of_iio_channel_get(struct iio_channel *channel, - struct device_node *np, int index) +static int __fwnode_iio_channel_get(struct iio_channel *channel, + struct fwnode_handle *fwnode, int index) { + struct fwnode_reference_args iiospec; struct device *idev; struct iio_dev *indio_dev; int err; - struct of_phandle_args iiospec; - err = of_parse_phandle_with_args(np, "io-channels", - "#io-channel-cells", - index, &iiospec); + err = fwnode_property_get_reference_args(fwnode, "io-channels", + "#io-channel-cells", 0, + index, &iiospec); if (err) return err; - idev = bus_find_device(&iio_bus_type, NULL, iiospec.np, - iio_dev_node_match); - of_node_put(iiospec.np); - if (idev == NULL) + idev = bus_find_device_by_fwnode(&iio_bus_type, iiospec.fwnode); + if (!idev) { + fwnode_handle_put(iiospec.fwnode); return -EPROBE_DEFER; + } indio_dev = dev_to_iio_dev(idev); channel->indio_dev = indio_dev; - if (indio_dev->info->of_xlate) - index = indio_dev->info->of_xlate(indio_dev, &iiospec); + if (indio_dev->info->fwnode_xlate) + index = indio_dev->info->fwnode_xlate(indio_dev, &iiospec); else - index = __of_iio_simple_xlate(indio_dev, &iiospec); + index = __fwnode_iio_simple_xlate(indio_dev, &iiospec); + fwnode_handle_put(iiospec.fwnode); if (index < 0) goto err_put; channel->channel = &indio_dev->channels[index]; @@ -186,7 +179,8 @@ err_put: return index; } -static struct iio_channel *of_iio_channel_get(struct device_node *np, int index) +static struct iio_channel *fwnode_iio_channel_get(struct fwnode_handle *fwnode, + int index) { struct iio_channel *channel; int err; @@ -195,10 +189,10 @@ static struct iio_channel *of_iio_channel_get(struct device_node *np, int index) return ERR_PTR(-EINVAL); channel = kzalloc(sizeof(*channel), GFP_KERNEL); - if (channel == NULL) + if (!channel) return ERR_PTR(-ENOMEM); - err = __of_iio_channel_get(channel, np, index); + err = __fwnode_iio_channel_get(channel, fwnode, index); if (err) goto err_free_channel; @@ -209,74 +203,116 @@ err_free_channel: return ERR_PTR(err); } -struct iio_channel *of_iio_channel_get_by_name(struct device_node *np, - const char *name) +static struct iio_channel * +__fwnode_iio_channel_get_by_name(struct fwnode_handle *fwnode, const char *name) { - struct iio_channel *chan = NULL; - - /* Walk up the tree of devices looking for a matching iio channel */ - while (np) { - int index = 0; - + struct iio_channel *chan; + int index = 0; + + /* + * For named iio channels, first look up the name in the + * "io-channel-names" property. If it cannot be found, the + * index will be an error code, and fwnode_iio_channel_get() + * will fail. + */ + if (name) + index = fwnode_property_match_string(fwnode, "io-channel-names", + name); + + chan = fwnode_iio_channel_get(fwnode, index); + if (!IS_ERR(chan) || PTR_ERR(chan) == -EPROBE_DEFER) + return chan; + if (name) { + if (index >= 0) { + pr_err("ERROR: could not get IIO channel %pfw:%s(%i)\n", + fwnode, name, index); + /* + * In this case, we found 'name' in 'io-channel-names' + * but somehow we still fail so that we should not proceed + * with any other lookup. Hence, explicitly return -EINVAL + * (maybe not the better error code) so that the caller + * won't do a system lookup. + */ + return ERR_PTR(-EINVAL); + } /* - * For named iio channels, first look up the name in the - * "io-channel-names" property. If it cannot be found, the - * index will be an error code, and of_iio_channel_get() - * will fail. + * If index < 0, then fwnode_property_get_reference_args() fails + * with -EINVAL or -ENOENT (ACPI case) which is expected. We + * should not proceed if we get any other error. */ - if (name) - index = of_property_match_string(np, "io-channel-names", - name); - chan = of_iio_channel_get(np, index); - if (!IS_ERR(chan) || PTR_ERR(chan) == -EPROBE_DEFER) - break; - else if (name && index >= 0) { - pr_err("ERROR: could not get IIO channel %pOF:%s(%i)\n", - np, name ? name : "", index); - return NULL; - } - + if (PTR_ERR(chan) != -EINVAL && PTR_ERR(chan) != -ENOENT) + return chan; + } else if (PTR_ERR(chan) != -ENOENT) { /* - * No matching IIO channel found on this node. - * If the parent node has a "io-channel-ranges" property, - * then we can try one of its channels. + * if !name, then we should only proceed the lookup if + * fwnode_property_get_reference_args() returns -ENOENT. */ - np = np->parent; - if (np && !of_get_property(np, "io-channel-ranges", NULL)) - return NULL; + return chan; } - return chan; + /* so we continue the lookup */ + return ERR_PTR(-ENODEV); } -EXPORT_SYMBOL_GPL(of_iio_channel_get_by_name); -static struct iio_channel *of_iio_channel_get_all(struct device *dev) +struct iio_channel *fwnode_iio_channel_get_by_name(struct fwnode_handle *fwnode, + const char *name) { + struct fwnode_handle *parent; + struct iio_channel *chan; + + /* Walk up the tree of devices looking for a matching iio channel */ + chan = __fwnode_iio_channel_get_by_name(fwnode, name); + if (!IS_ERR(chan) || PTR_ERR(chan) != -ENODEV) + return chan; + + /* + * No matching IIO channel found on this node. + * If the parent node has a "io-channel-ranges" property, + * then we can try one of its channels. + */ + fwnode_for_each_parent_node(fwnode, parent) { + if (!fwnode_property_present(parent, "io-channel-ranges")) { + fwnode_handle_put(parent); + return ERR_PTR(-ENODEV); + } + + chan = __fwnode_iio_channel_get_by_name(fwnode, name); + if (!IS_ERR(chan) || PTR_ERR(chan) != -ENODEV) { + fwnode_handle_put(parent); + return chan; + } + } + + return ERR_PTR(-ENODEV); +} +EXPORT_SYMBOL_GPL(fwnode_iio_channel_get_by_name); + +static struct iio_channel *fwnode_iio_channel_get_all(struct device *dev) +{ + struct fwnode_handle *fwnode = dev_fwnode(dev); struct iio_channel *chans; int i, mapind, nummaps = 0; int ret; do { - ret = of_parse_phandle_with_args(dev->of_node, - "io-channels", - "#io-channel-cells", - nummaps, NULL); + ret = fwnode_property_get_reference_args(fwnode, "io-channels", + "#io-channel-cells", 0, + nummaps, NULL); if (ret < 0) break; } while (++nummaps); - if (nummaps == 0) /* no error, return NULL to search map table */ - return NULL; + if (nummaps == 0) + return ERR_PTR(-ENODEV); /* NULL terminated array to save passing size */ chans = kcalloc(nummaps + 1, sizeof(*chans), GFP_KERNEL); - if (chans == NULL) + if (!chans) return ERR_PTR(-ENOMEM); - /* Search for OF matches */ + /* Search for FW matches */ for (mapind = 0; mapind < nummaps; mapind++) { - ret = __of_iio_channel_get(&chans[mapind], dev->of_node, - mapind); + ret = __fwnode_iio_channel_get(&chans[mapind], fwnode, mapind); if (ret) goto error_free_chans; } @@ -289,15 +325,6 @@ error_free_chans: return ERR_PTR(ret); } -#else /* CONFIG_OF */ - -static inline struct iio_channel *of_iio_channel_get_all(struct device *dev) -{ - return NULL; -} - -#endif /* CONFIG_OF */ - static struct iio_channel *iio_channel_get_sys(const char *name, const char *channel_name) { @@ -305,7 +332,7 @@ static struct iio_channel *iio_channel_get_sys(const char *name, struct iio_channel *channel; int err; - if (name == NULL && channel_name == NULL) + if (!(name || channel_name)) return ERR_PTR(-ENODEV); /* first find matching entry the channel map */ @@ -320,11 +347,11 @@ static struct iio_channel *iio_channel_get_sys(const char *name, break; } mutex_unlock(&iio_map_list_lock); - if (c == NULL) + if (!c) return ERR_PTR(-ENODEV); channel = kzalloc(sizeof(*channel), GFP_KERNEL); - if (channel == NULL) { + if (!channel) { err = -ENOMEM; goto error_no_mem; } @@ -336,7 +363,7 @@ static struct iio_channel *iio_channel_get_sys(const char *name, iio_chan_spec_from_name(channel->indio_dev, c->map->adc_channel_label); - if (channel->channel == NULL) { + if (!channel->channel) { err = -EINVAL; goto error_no_chan; } @@ -358,9 +385,9 @@ struct iio_channel *iio_channel_get(struct device *dev, struct iio_channel *channel; if (dev) { - channel = of_iio_channel_get_by_name(dev->of_node, - channel_name); - if (channel != NULL) + channel = fwnode_iio_channel_get_by_name(dev_fwnode(dev), + channel_name); + if (!IS_ERR(channel) || PTR_ERR(channel) != -ENODEV) return channel; } @@ -400,14 +427,14 @@ struct iio_channel *devm_iio_channel_get(struct device *dev, } EXPORT_SYMBOL_GPL(devm_iio_channel_get); -struct iio_channel *devm_of_iio_channel_get_by_name(struct device *dev, - struct device_node *np, - const char *channel_name) +struct iio_channel *devm_fwnode_iio_channel_get_by_name(struct device *dev, + struct fwnode_handle *fwnode, + const char *channel_name) { struct iio_channel *channel; int ret; - channel = of_iio_channel_get_by_name(np, channel_name); + channel = fwnode_iio_channel_get_by_name(fwnode, channel_name); if (IS_ERR(channel)) return channel; @@ -417,7 +444,7 @@ struct iio_channel *devm_of_iio_channel_get_by_name(struct device *dev, return channel; } -EXPORT_SYMBOL_GPL(devm_of_iio_channel_get_by_name); +EXPORT_SYMBOL_GPL(devm_fwnode_iio_channel_get_by_name); struct iio_channel *iio_channel_get_all(struct device *dev) { @@ -428,11 +455,15 @@ struct iio_channel *iio_channel_get_all(struct device *dev) int mapind = 0; int i, ret; - if (dev == NULL) + if (!dev) return ERR_PTR(-EINVAL); - chans = of_iio_channel_get_all(dev); - if (chans) + chans = fwnode_iio_channel_get_all(dev); + /* + * We only want to carry on if the error is -ENODEV. Anything else + * should be reported up the stack. + */ + if (!IS_ERR(chans) || PTR_ERR(chans) != -ENODEV) return chans; name = dev_name(dev); @@ -452,7 +483,7 @@ struct iio_channel *iio_channel_get_all(struct device *dev) /* NULL terminated array to save passing size */ chans = kcalloc(nummaps + 1, sizeof(*chans), GFP_KERNEL); - if (chans == NULL) { + if (!chans) { ret = -ENOMEM; goto error_ret; } @@ -466,7 +497,7 @@ struct iio_channel *iio_channel_get_all(struct device *dev) chans[mapind].channel = iio_chan_spec_from_name(chans[mapind].indio_dev, c->map->adc_channel_label); - if (chans[mapind].channel == NULL) { + if (!chans[mapind].channel) { ret = -EINVAL; goto error_free_chans; } @@ -528,14 +559,14 @@ struct iio_channel *devm_iio_channel_get_all(struct device *dev) EXPORT_SYMBOL_GPL(devm_iio_channel_get_all); static int iio_channel_read(struct iio_channel *chan, int *val, int *val2, - enum iio_chan_info_enum info) + enum iio_chan_info_enum info) { int unused; int vals[INDIO_MAX_RAW_ELEMENTS]; int ret; int val_len = 2; - if (val2 == NULL) + if (!val2) val2 = &unused; if (!iio_channel_has_info(chan->channel, info)) @@ -547,9 +578,10 @@ static int iio_channel_read(struct iio_channel *chan, int *val, int *val2, vals, &val_len, info); *val = vals[0]; *val2 = vals[1]; - } else + } else { ret = chan->indio_dev->info->read_raw(chan->indio_dev, chan->channel, val, val2, info); + } return ret; } @@ -560,7 +592,7 @@ int iio_read_channel_raw(struct iio_channel *chan, int *val) int ret; mutex_lock(&iio_dev_opaque->info_exist_lock); - if (chan->indio_dev->info == NULL) { + if (!chan->indio_dev->info) { ret = -ENODEV; goto err_unlock; } @@ -579,7 +611,7 @@ int iio_read_channel_average_raw(struct iio_channel *chan, int *val) int ret; mutex_lock(&iio_dev_opaque->info_exist_lock); - if (chan->indio_dev->info == NULL) { + if (!chan->indio_dev->info) { ret = -ENODEV; goto err_unlock; } @@ -593,7 +625,8 @@ err_unlock: EXPORT_SYMBOL_GPL(iio_read_channel_average_raw); static int iio_convert_raw_to_processed_unlocked(struct iio_channel *chan, - int raw, int *processed, unsigned int scale) + int raw, int *processed, + unsigned int scale) { int scale_type, scale_val, scale_val2; int offset_type, offset_val, offset_val2; @@ -626,7 +659,7 @@ static int iio_convert_raw_to_processed_unlocked(struct iio_channel *chan, } scale_type = iio_channel_read(chan, &scale_val, &scale_val2, - IIO_CHAN_INFO_SCALE); + IIO_CHAN_INFO_SCALE); if (scale_type < 0) { /* * If no channel scaling is available apply consumer scale to @@ -671,19 +704,19 @@ static int iio_convert_raw_to_processed_unlocked(struct iio_channel *chan, } int iio_convert_raw_to_processed(struct iio_channel *chan, int raw, - int *processed, unsigned int scale) + int *processed, unsigned int scale) { struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(chan->indio_dev); int ret; mutex_lock(&iio_dev_opaque->info_exist_lock); - if (chan->indio_dev->info == NULL) { + if (!chan->indio_dev->info) { ret = -ENODEV; goto err_unlock; } ret = iio_convert_raw_to_processed_unlocked(chan, raw, processed, - scale); + scale); err_unlock: mutex_unlock(&iio_dev_opaque->info_exist_lock); @@ -698,7 +731,7 @@ int iio_read_channel_attribute(struct iio_channel *chan, int *val, int *val2, int ret; mutex_lock(&iio_dev_opaque->info_exist_lock); - if (chan->indio_dev->info == NULL) { + if (!chan->indio_dev->info) { ret = -ENODEV; goto err_unlock; } @@ -724,7 +757,7 @@ int iio_read_channel_processed_scale(struct iio_channel *chan, int *val, int ret; mutex_lock(&iio_dev_opaque->info_exist_lock); - if (chan->indio_dev->info == NULL) { + if (!chan->indio_dev->info) { ret = -ENODEV; goto err_unlock; } @@ -802,7 +835,7 @@ int iio_read_avail_channel_raw(struct iio_channel *chan, int type; ret = iio_read_avail_channel_attribute(chan, vals, &type, length, - IIO_CHAN_INFO_RAW); + IIO_CHAN_INFO_RAW); if (ret >= 0 && type != IIO_VAL_INT) /* raw values are assumed to be IIO_VAL_INT */ @@ -886,7 +919,7 @@ int iio_get_channel_type(struct iio_channel *chan, enum iio_chan_type *type) /* Need to verify underlying driver has not gone away */ mutex_lock(&iio_dev_opaque->info_exist_lock); - if (chan->indio_dev->info == NULL) { + if (!chan->indio_dev->info) { ret = -ENODEV; goto err_unlock; } @@ -913,7 +946,7 @@ int iio_write_channel_attribute(struct iio_channel *chan, int val, int val2, int ret; mutex_lock(&iio_dev_opaque->info_exist_lock); - if (chan->indio_dev->info == NULL) { + if (!chan->indio_dev->info) { ret = -ENODEV; goto err_unlock; } @@ -947,9 +980,8 @@ unsigned int iio_get_channel_ext_info_count(struct iio_channel *chan) } EXPORT_SYMBOL_GPL(iio_get_channel_ext_info_count); -static const struct iio_chan_spec_ext_info *iio_lookup_ext_info( - const struct iio_channel *chan, - const char *attr) +static const struct iio_chan_spec_ext_info * +iio_lookup_ext_info(const struct iio_channel *chan, const char *attr) { const struct iio_chan_spec_ext_info *ext_info; diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index 8537e88f02e3..7cf6e8490123 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -331,6 +331,17 @@ config LTR501 This driver can also be built as a module. If so, the module will be called ltr501. +config LTRF216A + tristate "Liteon LTRF216A Light Sensor" + depends on I2C + select REGMAP_I2C + help + If you say Y or M here, you get support for Liteon LTRF216A + Ambient Light Sensor. + + If built as a dynamically linked module, it will be called + ltrf216a. + config LV0104CS tristate "LV0104CS Ambient Light Sensor" depends on I2C diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile index d10912faf964..6f23817fae6f 100644 --- a/drivers/iio/light/Makefile +++ b/drivers/iio/light/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_ISL29125) += isl29125.o obj-$(CONFIG_JSA1212) += jsa1212.o obj-$(CONFIG_SENSORS_LM3533) += lm3533-als.o obj-$(CONFIG_LTR501) += ltr501.o +obj-$(CONFIG_LTRF216A) += ltrf216a.o obj-$(CONFIG_LV0104CS) += lv0104cs.o obj-$(CONFIG_MAX44000) += max44000.o obj-$(CONFIG_MAX44009) += max44009.o diff --git a/drivers/iio/light/ltrf216a.c b/drivers/iio/light/ltrf216a.c new file mode 100644 index 000000000000..4b8ef36b6912 --- /dev/null +++ b/drivers/iio/light/ltrf216a.c @@ -0,0 +1,550 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * LTRF216A Ambient Light Sensor + * + * Copyright (C) 2022 Collabora, Ltd. + * Author: Shreeya Patel <shreeya.patel@collabora.com> + * + * Copyright (C) 2021 Lite-On Technology Corp (Singapore) + * Author: Shi Zhigang <Zhigang.Shi@liteon.com> + * + * IIO driver for LTRF216A (7-bit I2C slave address 0x53). + */ + +#include <linux/bitfield.h> +#include <linux/bits.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/iopoll.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> + +#include <linux/iio/iio.h> + +#include <asm/unaligned.h> + +#define LTRF216A_ALS_RESET_MASK BIT(4) +#define LTRF216A_ALS_DATA_STATUS BIT(3) +#define LTRF216A_ALS_ENABLE_MASK BIT(1) +#define LTRF216A_MAIN_CTRL 0x00 +#define LTRF216A_ALS_MEAS_RES 0x04 +#define LTRF216A_ALS_GAIN 0x05 +#define LTRF216A_PART_ID 0x06 +#define LTRF216A_MAIN_STATUS 0x07 +#define LTRF216A_ALS_CLEAR_DATA_0 0x0a +#define LTRF216A_ALS_CLEAR_DATA_1 0x0b +#define LTRF216A_ALS_CLEAR_DATA_2 0x0c +#define LTRF216A_ALS_DATA_0 0x0d +#define LTRF216A_ALS_DATA_1 0x0e +#define LTRF216A_ALS_DATA_2 0x0f +#define LTRF216A_INT_CFG 0x19 +#define LTRF216A_INT_PST 0x1a +#define LTRF216A_ALS_THRES_UP_0 0x21 +#define LTRF216A_ALS_THRES_UP_1 0x22 +#define LTRF216A_ALS_THRES_UP_2 0x23 +#define LTRF216A_ALS_THRES_LOW_0 0x24 +#define LTRF216A_ALS_THRES_LOW_1 0x25 +#define LTRF216A_ALS_THRES_LOW_2 0x26 +#define LTRF216A_ALS_READ_DATA_DELAY_US 20000 + +static const int ltrf216a_int_time_available[][2] = { + { 0, 400000 }, + { 0, 200000 }, + { 0, 100000 }, + { 0, 50000 }, + { 0, 25000 }, +}; + +static const int ltrf216a_int_time_reg[][2] = { + { 400, 0x03 }, + { 200, 0x13 }, + { 100, 0x22 }, + { 50, 0x31 }, + { 25, 0x40 }, +}; + +/* + * Window Factor is needed when the device is under Window glass + * with coated tinted ink. This is to compensate for the light loss + * due to the lower transmission rate of the window glass and helps + * in calculating lux. + */ +#define LTRF216A_WIN_FAC 1 + +struct ltrf216a_data { + struct regmap *regmap; + struct i2c_client *client; + u32 int_time; + u16 int_time_fac; + u8 als_gain_fac; + /* + * Protects regmap accesses and makes sure integration time + * remains constant during the measurement of lux. + */ + struct mutex lock; +}; + +static const struct iio_chan_spec ltrf216a_channels[] = { + { + .type = IIO_LIGHT, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_INT_TIME), + .info_mask_separate_available = + BIT(IIO_CHAN_INFO_INT_TIME), + }, +}; + +static void ltrf216a_reset(struct iio_dev *indio_dev) +{ + struct ltrf216a_data *data = iio_priv(indio_dev); + + /* reset sensor, chip fails to respond to this, so ignore any errors */ + regmap_write(data->regmap, LTRF216A_MAIN_CTRL, LTRF216A_ALS_RESET_MASK); + + /* reset time */ + usleep_range(1000, 2000); +} + +static int ltrf216a_enable(struct iio_dev *indio_dev) +{ + struct ltrf216a_data *data = iio_priv(indio_dev); + struct device *dev = &data->client->dev; + int ret; + + /* enable sensor */ + ret = regmap_set_bits(data->regmap, + LTRF216A_MAIN_CTRL, LTRF216A_ALS_ENABLE_MASK); + if (ret) { + dev_err(dev, "failed to enable sensor: %d\n", ret); + return ret; + } + + /* sleep for one integration cycle after enabling the device */ + msleep(ltrf216a_int_time_reg[0][0]); + + return 0; +} + +static int ltrf216a_disable(struct iio_dev *indio_dev) +{ + struct ltrf216a_data *data = iio_priv(indio_dev); + struct device *dev = &data->client->dev; + int ret; + + ret = regmap_write(data->regmap, LTRF216A_MAIN_CTRL, 0); + if (ret) + dev_err(dev, "failed to disable sensor: %d\n", ret); + + return ret; +} + +static void ltrf216a_cleanup(void *data) +{ + struct iio_dev *indio_dev = data; + + ltrf216a_disable(indio_dev); +} + +static int ltrf216a_set_int_time(struct ltrf216a_data *data, int itime) +{ + struct device *dev = &data->client->dev; + unsigned int i; + u8 reg_val; + int ret; + + for (i = 0; i < ARRAY_SIZE(ltrf216a_int_time_available); i++) { + if (ltrf216a_int_time_available[i][1] == itime) + break; + } + if (i == ARRAY_SIZE(ltrf216a_int_time_available)) + return -EINVAL; + + reg_val = ltrf216a_int_time_reg[i][1]; + + ret = regmap_write(data->regmap, LTRF216A_ALS_MEAS_RES, reg_val); + if (ret) { + dev_err(dev, "failed to set integration time: %d\n", ret); + return ret; + } + + data->int_time_fac = ltrf216a_int_time_reg[i][0]; + data->int_time = itime; + + return 0; +} + +static int ltrf216a_get_int_time(struct ltrf216a_data *data, + int *val, int *val2) +{ + *val = 0; + *val2 = data->int_time; + return IIO_VAL_INT_PLUS_MICRO; +} + +static int ltrf216a_set_power_state(struct ltrf216a_data *data, bool on) +{ + struct device *dev = &data->client->dev; + int ret = 0; + + if (on) { + ret = pm_runtime_resume_and_get(dev); + if (ret) { + dev_err(dev, "failed to resume runtime PM: %d\n", ret); + return ret; + } + } else { + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + } + + return ret; +} + +static int ltrf216a_read_data(struct ltrf216a_data *data, u8 addr) +{ + struct device *dev = &data->client->dev; + int ret, val; + u8 buf[3]; + + ret = regmap_read_poll_timeout(data->regmap, LTRF216A_MAIN_STATUS, + val, val & LTRF216A_ALS_DATA_STATUS, + LTRF216A_ALS_READ_DATA_DELAY_US, + LTRF216A_ALS_READ_DATA_DELAY_US * 50); + if (ret) { + dev_err(dev, "failed to wait for measurement data: %d\n", ret); + return ret; + } + + ret = regmap_bulk_read(data->regmap, addr, buf, sizeof(buf)); + if (ret) { + dev_err(dev, "failed to read measurement data: %d\n", ret); + return ret; + } + + return get_unaligned_le24(&buf[0]); +} + +static int ltrf216a_get_lux(struct ltrf216a_data *data) +{ + int ret, greendata; + u64 lux, div; + + ret = ltrf216a_set_power_state(data, true); + if (ret) + return ret; + + greendata = ltrf216a_read_data(data, LTRF216A_ALS_DATA_0); + if (greendata < 0) + return greendata; + + ltrf216a_set_power_state(data, false); + + lux = greendata * 45 * LTRF216A_WIN_FAC * 100; + div = data->als_gain_fac * data->int_time_fac * 100; + + return div_u64(lux, div); +} + +static int ltrf216a_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct ltrf216a_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = ltrf216a_set_power_state(data, true); + if (ret) + return ret; + mutex_lock(&data->lock); + ret = ltrf216a_read_data(data, LTRF216A_ALS_DATA_0); + mutex_unlock(&data->lock); + ltrf216a_set_power_state(data, false); + if (ret < 0) + return ret; + *val = ret; + return IIO_VAL_INT; + case IIO_CHAN_INFO_PROCESSED: + mutex_lock(&data->lock); + ret = ltrf216a_get_lux(data); + mutex_unlock(&data->lock); + if (ret < 0) + return ret; + *val = ret; + return IIO_VAL_INT; + case IIO_CHAN_INFO_INT_TIME: + mutex_lock(&data->lock); + ret = ltrf216a_get_int_time(data, val, val2); + mutex_unlock(&data->lock); + return ret; + default: + return -EINVAL; + } +} + +static int ltrf216a_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, + int val2, long mask) +{ + struct ltrf216a_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_INT_TIME: + if (val != 0) + return -EINVAL; + mutex_lock(&data->lock); + ret = ltrf216a_set_int_time(data, val2); + mutex_unlock(&data->lock); + return ret; + default: + return -EINVAL; + } +} + +static int ltrf216a_read_available(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_INT_TIME: + *length = ARRAY_SIZE(ltrf216a_int_time_available) * 2; + *vals = (const int *)ltrf216a_int_time_available; + *type = IIO_VAL_INT_PLUS_MICRO; + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } +} + +static const struct iio_info ltrf216a_info = { + .read_raw = ltrf216a_read_raw, + .write_raw = ltrf216a_write_raw, + .read_avail = ltrf216a_read_available, +}; + +static bool ltrf216a_readable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case LTRF216A_MAIN_CTRL: + case LTRF216A_ALS_MEAS_RES: + case LTRF216A_ALS_GAIN: + case LTRF216A_PART_ID: + case LTRF216A_MAIN_STATUS: + case LTRF216A_ALS_CLEAR_DATA_0: + case LTRF216A_ALS_CLEAR_DATA_1: + case LTRF216A_ALS_CLEAR_DATA_2: + case LTRF216A_ALS_DATA_0: + case LTRF216A_ALS_DATA_1: + case LTRF216A_ALS_DATA_2: + case LTRF216A_INT_CFG: + case LTRF216A_INT_PST: + case LTRF216A_ALS_THRES_UP_0: + case LTRF216A_ALS_THRES_UP_1: + case LTRF216A_ALS_THRES_UP_2: + case LTRF216A_ALS_THRES_LOW_0: + case LTRF216A_ALS_THRES_LOW_1: + case LTRF216A_ALS_THRES_LOW_2: + return true; + default: + return false; + } +} + +static bool ltrf216a_writable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case LTRF216A_MAIN_CTRL: + case LTRF216A_ALS_MEAS_RES: + case LTRF216A_ALS_GAIN: + case LTRF216A_INT_CFG: + case LTRF216A_INT_PST: + case LTRF216A_ALS_THRES_UP_0: + case LTRF216A_ALS_THRES_UP_1: + case LTRF216A_ALS_THRES_UP_2: + case LTRF216A_ALS_THRES_LOW_0: + case LTRF216A_ALS_THRES_LOW_1: + case LTRF216A_ALS_THRES_LOW_2: + return true; + default: + return false; + } +} + +static bool ltrf216a_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case LTRF216A_MAIN_STATUS: + case LTRF216A_ALS_CLEAR_DATA_0: + case LTRF216A_ALS_CLEAR_DATA_1: + case LTRF216A_ALS_CLEAR_DATA_2: + case LTRF216A_ALS_DATA_0: + case LTRF216A_ALS_DATA_1: + case LTRF216A_ALS_DATA_2: + return true; + default: + return false; + } +} + +static bool ltrf216a_precious_reg(struct device *dev, unsigned int reg) +{ + return reg == LTRF216A_MAIN_STATUS; +} + +static const struct regmap_config ltrf216a_regmap_config = { + .name = "ltrf216a", + .reg_bits = 8, + .val_bits = 8, + .cache_type = REGCACHE_RBTREE, + .max_register = LTRF216A_ALS_THRES_LOW_2, + .readable_reg = ltrf216a_readable_reg, + .writeable_reg = ltrf216a_writable_reg, + .volatile_reg = ltrf216a_volatile_reg, + .precious_reg = ltrf216a_precious_reg, + .disable_locking = true, +}; + +static int ltrf216a_probe(struct i2c_client *client) +{ + struct ltrf216a_data *data; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + + data->regmap = devm_regmap_init_i2c(client, <rf216a_regmap_config); + if (IS_ERR(data->regmap)) + return dev_err_probe(&client->dev, PTR_ERR(data->regmap), + "regmap initialization failed\n"); + + i2c_set_clientdata(client, indio_dev); + data->client = client; + + mutex_init(&data->lock); + + indio_dev->info = <rf216a_info; + indio_dev->name = "ltrf216a"; + indio_dev->channels = ltrf216a_channels; + indio_dev->num_channels = ARRAY_SIZE(ltrf216a_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = pm_runtime_set_active(&client->dev); + if (ret) + return ret; + + /* reset sensor, chip fails to respond to this, so ignore any errors */ + ltrf216a_reset(indio_dev); + + ret = regmap_reinit_cache(data->regmap, <rf216a_regmap_config); + if (ret) + return dev_err_probe(&client->dev, ret, + "failed to reinit regmap cache\n"); + + ret = ltrf216a_enable(indio_dev); + if (ret) + return ret; + + ret = devm_add_action_or_reset(&client->dev, ltrf216a_cleanup, + indio_dev); + if (ret) + return ret; + + ret = devm_pm_runtime_enable(&client->dev); + if (ret) + return dev_err_probe(&client->dev, ret, + "failed to enable runtime PM\n"); + + pm_runtime_set_autosuspend_delay(&client->dev, 1000); + pm_runtime_use_autosuspend(&client->dev); + + data->int_time = 100000; + data->int_time_fac = 100; + data->als_gain_fac = 3; + + return devm_iio_device_register(&client->dev, indio_dev); +} + +static int ltrf216a_runtime_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct ltrf216a_data *data = iio_priv(indio_dev); + int ret; + + ret = ltrf216a_disable(indio_dev); + if (ret) + return ret; + + regcache_cache_only(data->regmap, true); + + return 0; +} + +static int ltrf216a_runtime_resume(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct ltrf216a_data *data = iio_priv(indio_dev); + int ret; + + regcache_cache_only(data->regmap, false); + regcache_mark_dirty(data->regmap); + ret = regcache_sync(data->regmap); + if (ret) + goto cache_only; + + ret = ltrf216a_enable(indio_dev); + if (ret) + goto cache_only; + + return 0; + +cache_only: + regcache_cache_only(data->regmap, true); + + return ret; +} + +static DEFINE_RUNTIME_DEV_PM_OPS(ltrf216a_pm_ops, ltrf216a_runtime_suspend, + ltrf216a_runtime_resume, NULL); + +static const struct i2c_device_id ltrf216a_id[] = { + { "ltrf216a" }, + {} +}; +MODULE_DEVICE_TABLE(i2c, ltrf216a_id); + +static const struct of_device_id ltrf216a_of_match[] = { + { .compatible = "liteon,ltrf216a" }, + { .compatible = "ltr,ltrf216a" }, + {} +}; +MODULE_DEVICE_TABLE(of, ltrf216a_of_match); + +static struct i2c_driver ltrf216a_driver = { + .driver = { + .name = "ltrf216a", + .pm = pm_ptr(<rf216a_pm_ops), + .of_match_table = ltrf216a_of_match, + }, + .probe_new = ltrf216a_probe, + .id_table = ltrf216a_id, +}; +module_i2c_driver(ltrf216a_driver); + +MODULE_AUTHOR("Shreeya Patel <shreeya.patel@collabora.com>"); +MODULE_AUTHOR("Shi Zhigang <Zhigang.Shi@liteon.com>"); +MODULE_DESCRIPTION("LTRF216A ambient light sensor driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/light/st_uvis25_core.c b/drivers/iio/light/st_uvis25_core.c index 3d4cc1180b6a..c737d3e193ae 100644 --- a/drivers/iio/light/st_uvis25_core.c +++ b/drivers/iio/light/st_uvis25_core.c @@ -325,7 +325,7 @@ int st_uvis25_probe(struct device *dev, int irq, struct regmap *regmap) } EXPORT_SYMBOL_NS(st_uvis25_probe, IIO_UVIS25); -static int __maybe_unused st_uvis25_suspend(struct device *dev) +static int st_uvis25_suspend(struct device *dev) { struct iio_dev *iio_dev = dev_get_drvdata(dev); struct st_uvis25_hw *hw = iio_priv(iio_dev); @@ -334,7 +334,7 @@ static int __maybe_unused st_uvis25_suspend(struct device *dev) ST_UVIS25_REG_ODR_MASK, 0); } -static int __maybe_unused st_uvis25_resume(struct device *dev) +static int st_uvis25_resume(struct device *dev) { struct iio_dev *iio_dev = dev_get_drvdata(dev); struct st_uvis25_hw *hw = iio_priv(iio_dev); @@ -346,10 +346,7 @@ static int __maybe_unused st_uvis25_resume(struct device *dev) return 0; } -const struct dev_pm_ops st_uvis25_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(st_uvis25_suspend, st_uvis25_resume) -}; -EXPORT_SYMBOL_NS(st_uvis25_pm_ops, IIO_UVIS25); +EXPORT_NS_SIMPLE_DEV_PM_OPS(st_uvis25_pm_ops, st_uvis25_suspend, st_uvis25_resume, IIO_UVIS25); MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>"); MODULE_DESCRIPTION("STMicroelectronics uvis25 sensor driver"); diff --git a/drivers/iio/light/st_uvis25_i2c.c b/drivers/iio/light/st_uvis25_i2c.c index b06d09af28a3..c982b0b255cf 100644 --- a/drivers/iio/light/st_uvis25_i2c.c +++ b/drivers/iio/light/st_uvis25_i2c.c @@ -55,7 +55,7 @@ MODULE_DEVICE_TABLE(i2c, st_uvis25_i2c_id_table); static struct i2c_driver st_uvis25_driver = { .driver = { .name = "st_uvis25_i2c", - .pm = &st_uvis25_pm_ops, + .pm = pm_sleep_ptr(&st_uvis25_pm_ops), .of_match_table = st_uvis25_i2c_of_match, }, .probe = st_uvis25_i2c_probe, diff --git a/drivers/iio/light/st_uvis25_spi.c b/drivers/iio/light/st_uvis25_spi.c index 3a4dc6d7180c..86a232320d7d 100644 --- a/drivers/iio/light/st_uvis25_spi.c +++ b/drivers/iio/light/st_uvis25_spi.c @@ -55,7 +55,7 @@ MODULE_DEVICE_TABLE(spi, st_uvis25_spi_id_table); static struct spi_driver st_uvis25_driver = { .driver = { .name = "st_uvis25_spi", - .pm = &st_uvis25_pm_ops, + .pm = pm_sleep_ptr(&st_uvis25_pm_ops), .of_match_table = st_uvis25_spi_of_match, }, .probe = st_uvis25_spi_probe, diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig index 07eb619bcfe8..b91fc5e6a26e 100644 --- a/drivers/iio/magnetometer/Kconfig +++ b/drivers/iio/magnetometer/Kconfig @@ -216,8 +216,8 @@ config YAMAHA_YAS530 select IIO_TRIGGERED_BUFFER help Say Y here to add support for the Yamaha YAS530 series of - 3-Axis Magnetometers. Right now YAS530, YAS532 and YAS533 are - fully supported. + 3-Axis Magnetometers. YAS530, YAS532, YAS533 and YAS537 are + supported. This driver can also be compiled as a module. To compile this driver as a module, choose M here: the module diff --git a/drivers/iio/magnetometer/hmc5843.h b/drivers/iio/magnetometer/hmc5843.h index 9120c8bbf3dd..60fbb5431c88 100644 --- a/drivers/iio/magnetometer/hmc5843.h +++ b/drivers/iio/magnetometer/hmc5843.h @@ -52,16 +52,5 @@ int hmc5843_common_probe(struct device *dev, struct regmap *regmap, enum hmc5843_ids id, const char *name); void hmc5843_common_remove(struct device *dev); -int hmc5843_common_suspend(struct device *dev); -int hmc5843_common_resume(struct device *dev); - -#ifdef CONFIG_PM_SLEEP -static __maybe_unused SIMPLE_DEV_PM_OPS(hmc5843_pm_ops, - hmc5843_common_suspend, - hmc5843_common_resume); -#define HMC5843_PM_OPS (&hmc5843_pm_ops) -#else -#define HMC5843_PM_OPS NULL -#endif - +extern const struct dev_pm_ops hmc5843_pm_ops; #endif /* HMC5843_CORE_H */ diff --git a/drivers/iio/magnetometer/hmc5843_core.c b/drivers/iio/magnetometer/hmc5843_core.c index 4a63b2da9df0..c5521d61da29 100644 --- a/drivers/iio/magnetometer/hmc5843_core.c +++ b/drivers/iio/magnetometer/hmc5843_core.c @@ -603,19 +603,19 @@ static const struct iio_info hmc5843_info = { static const unsigned long hmc5843_scan_masks[] = {0x7, 0}; -int hmc5843_common_suspend(struct device *dev) +static int hmc5843_common_suspend(struct device *dev) { return hmc5843_set_mode(iio_priv(dev_get_drvdata(dev)), HMC5843_MODE_SLEEP); } -EXPORT_SYMBOL_NS(hmc5843_common_suspend, IIO_HMC5843); -int hmc5843_common_resume(struct device *dev) +static int hmc5843_common_resume(struct device *dev) { return hmc5843_set_mode(iio_priv(dev_get_drvdata(dev)), HMC5843_MODE_CONVERSION_CONTINUOUS); } -EXPORT_SYMBOL_NS(hmc5843_common_resume, IIO_HMC5843); +EXPORT_NS_SIMPLE_DEV_PM_OPS(hmc5843_pm_ops, hmc5843_common_suspend, + hmc5843_common_resume, IIO_HMC5843); int hmc5843_common_probe(struct device *dev, struct regmap *regmap, enum hmc5843_ids id, const char *name) diff --git a/drivers/iio/magnetometer/hmc5843_i2c.c b/drivers/iio/magnetometer/hmc5843_i2c.c index fe5e8415b2f2..18a13dd51296 100644 --- a/drivers/iio/magnetometer/hmc5843_i2c.c +++ b/drivers/iio/magnetometer/hmc5843_i2c.c @@ -91,7 +91,7 @@ MODULE_DEVICE_TABLE(of, hmc5843_of_match); static struct i2c_driver hmc5843_driver = { .driver = { .name = "hmc5843", - .pm = HMC5843_PM_OPS, + .pm = pm_sleep_ptr(&hmc5843_pm_ops), .of_match_table = hmc5843_of_match, }, .id_table = hmc5843_id, diff --git a/drivers/iio/magnetometer/hmc5843_spi.c b/drivers/iio/magnetometer/hmc5843_spi.c index 8403f09aba39..c42d2e2a6a6c 100644 --- a/drivers/iio/magnetometer/hmc5843_spi.c +++ b/drivers/iio/magnetometer/hmc5843_spi.c @@ -86,13 +86,13 @@ static const struct spi_device_id hmc5843_id[] = { MODULE_DEVICE_TABLE(spi, hmc5843_id); static struct spi_driver hmc5843_driver = { - .driver = { - .name = "hmc5843", - .pm = HMC5843_PM_OPS, - }, - .id_table = hmc5843_id, - .probe = hmc5843_spi_probe, - .remove = hmc5843_spi_remove, + .driver = { + .name = "hmc5843", + .pm = pm_sleep_ptr(&hmc5843_pm_ops), + }, + .id_table = hmc5843_id, + .probe = hmc5843_spi_probe, + .remove = hmc5843_spi_remove, }; module_spi_driver(hmc5843_driver); diff --git a/drivers/iio/magnetometer/yamaha-yas530.c b/drivers/iio/magnetometer/yamaha-yas530.c index c3a10942654e..801c760feb4d 100644 --- a/drivers/iio/magnetometer/yamaha-yas530.c +++ b/drivers/iio/magnetometer/yamaha-yas530.c @@ -10,13 +10,16 @@ * (YAS534 is a magnetic switch, not handled) * YAS535 MS-6C * YAS536 MS-3W - * YAS537 MS-3T (2015 Samsung Galaxy S6, Note 5, Xiaomi) + * YAS537 MS-3T (2015 Samsung Galaxy S6, Note 5, Galaxy S7) * YAS539 MS-3S (2018 Samsung Galaxy A7 SM-A750FN) * * Code functions found in the MPU3050 YAS530 and YAS532 drivers * named "inv_compass" in the Tegra Android kernel tree. * Copyright (C) 2012 InvenSense Corporation * + * Code functions for YAS537 based on Yamaha Android kernel driver. + * Copyright (c) 2014 Yamaha Corporation + * * Author: Linus Walleij <linus.walleij@linaro.org> */ #include <linux/bitfield.h> @@ -29,9 +32,11 @@ #include <linux/mod_devicetable.h> #include <linux/mutex.h> #include <linux/pm_runtime.h> +#include <linux/property.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> #include <linux/random.h> +#include <linux/units.h> #include <linux/iio/buffer.h> #include <linux/iio/iio.h> @@ -40,20 +45,39 @@ #include <asm/unaligned.h> -/* This register map covers YAS530 and YAS532 but differs in YAS 537 and YAS539 */ +/* Commonly used registers */ #define YAS5XX_DEVICE_ID 0x80 -#define YAS5XX_ACTUATE_INIT_COIL 0x81 -#define YAS5XX_MEASURE 0x82 -#define YAS5XX_CONFIG 0x83 -#define YAS5XX_MEASURE_INTERVAL 0x84 -#define YAS5XX_OFFSET_X 0x85 /* [-31 .. 31] */ -#define YAS5XX_OFFSET_Y1 0x86 /* [-31 .. 31] */ -#define YAS5XX_OFFSET_Y2 0x87 /* [-31 .. 31] */ -#define YAS5XX_TEST1 0x88 -#define YAS5XX_TEST2 0x89 -#define YAS5XX_CAL 0x90 #define YAS5XX_MEASURE_DATA 0xB0 +/* These registers are used by YAS530, YAS532 and YAS533 */ +#define YAS530_ACTUATE_INIT_COIL 0x81 +#define YAS530_MEASURE 0x82 +#define YAS530_CONFIG 0x83 +#define YAS530_MEASURE_INTERVAL 0x84 +#define YAS530_OFFSET_X 0x85 /* [-31 .. 31] */ +#define YAS530_OFFSET_Y1 0x86 /* [-31 .. 31] */ +#define YAS530_OFFSET_Y2 0x87 /* [-31 .. 31] */ +#define YAS530_TEST1 0x88 +#define YAS530_TEST2 0x89 +#define YAS530_CAL 0x90 + +/* Registers used by YAS537 */ +#define YAS537_MEASURE 0x81 /* Originally YAS537_REG_CMDR */ +#define YAS537_CONFIG 0x82 /* Originally YAS537_REG_CONFR */ +#define YAS537_MEASURE_INTERVAL 0x83 /* Originally YAS537_REG_INTRVLR */ +#define YAS537_OFFSET_X 0x84 /* Originally YAS537_REG_OXR */ +#define YAS537_OFFSET_Y1 0x85 /* Originally YAS537_REG_OY1R */ +#define YAS537_OFFSET_Y2 0x86 /* Originally YAS537_REG_OY2R */ +#define YAS537_AVR 0x87 +#define YAS537_HCK 0x88 +#define YAS537_LCK 0x89 +#define YAS537_SRST 0x90 +#define YAS537_ADCCAL 0x91 +#define YAS537_MTC 0x93 +#define YAS537_OC 0x9E +#define YAS537_TRM 0x9F +#define YAS537_CAL 0xC0 + /* Bits in the YAS5xx config register */ #define YAS5XX_CONFIG_INTON BIT(0) /* Interrupt on? */ #define YAS5XX_CONFIG_INTHACT BIT(1) /* Interrupt active high? */ @@ -65,6 +89,7 @@ #define YAS5XX_MEASURE_LDTC BIT(1) #define YAS5XX_MEASURE_FORS BIT(2) #define YAS5XX_MEASURE_DLYMES BIT(4) +#define YAS5XX_MEASURE_CONT BIT(5) /* Bits in the measure data register */ #define YAS5XX_MEASURE_DATA_BUSY BIT(7) @@ -88,33 +113,101 @@ #define YAS532_DATA_BITS 13 #define YAS532_DATA_CENTER BIT(YAS532_DATA_BITS - 1) #define YAS532_DATA_OVERFLOW (BIT(YAS532_DATA_BITS) - 1) -#define YAS532_20DEGREES 390 /* Looks like Kelvin */ -/* These variant IDs are known from code dumps */ #define YAS537_DEVICE_ID 0x07 /* YAS537 (MS-3T) */ -#define YAS539_DEVICE_ID 0x08 /* YAS539 (MS-3S) */ +#define YAS537_VERSION_0 0 /* Version naming unknown */ +#define YAS537_VERSION_1 1 /* Version naming unknown */ +#define YAS537_MAG_AVERAGE_32_MASK GENMASK(6, 4) +#define YAS537_MEASURE_TIME_WORST_US 1500 +#define YAS537_DEFAULT_SENSOR_DELAY_MS 50 +#define YAS537_MAG_RCOIL_TIME_US 65 +#define YAS537_MTC3_MASK_PREP GENMASK(7, 0) +#define YAS537_MTC3_MASK_GET GENMASK(7, 5) +#define YAS537_MTC3_ADD_BIT BIT(4) +#define YAS537_HCK_MASK_PREP GENMASK(4, 0) +#define YAS537_HCK_MASK_GET GENMASK(7, 4) +#define YAS537_LCK_MASK_PREP GENMASK(4, 0) +#define YAS537_LCK_MASK_GET GENMASK(3, 0) +#define YAS537_OC_MASK_GET GENMASK(5, 0) /* Turn off device regulators etc after 5 seconds of inactivity */ #define YAS5XX_AUTOSUSPEND_DELAY_MS 5000 +enum chip_ids { + yas530, + yas532, + yas533, + yas537, +}; + +static const int yas530_volatile_reg[] = { + YAS530_ACTUATE_INIT_COIL, + YAS530_MEASURE, +}; + +static const int yas537_volatile_reg[] = { + YAS537_MEASURE, +}; + struct yas5xx_calibration { /* Linearization calibration x, y1, y2 */ s32 r[3]; u32 f[3]; /* Temperature compensation calibration */ - s32 Cx, Cy1, Cy2; + s16 Cx, Cy1, Cy2; /* Misc calibration coefficients */ - s32 a2, a3, a4, a5, a6, a7, a8, a9, k; + s8 a2, a3, a4, a6, a7, a8; + s16 a5, a9; + u8 k; /* clock divider */ u8 dck; }; +struct yas5xx; + +/** + * struct yas5xx_chip_info - device-specific data and function pointers + * @devid: device ID number + * @product_name: product name of the YAS variant + * @version_names: version letters or namings + * @volatile_reg: device-specific volatile registers + * @volatile_reg_qty: quantity of device-specific volatile registers + * @scaling_val2: scaling value for IIO_CHAN_INFO_SCALE + * @t_ref: number of counts at reference temperature 20 °C + * @min_temp_x10: starting point of temperature counting in 1/10:s degrees Celsius + * @get_measure: function pointer to get a measurement + * @get_calibration_data: function pointer to get calibration data + * @dump_calibration: function pointer to dump calibration for debugging + * @measure_offsets: function pointer to measure the offsets + * @power_on: function pointer to power-on procedure + * + * The "t_ref" value for YAS532/533 is known from the Android driver. + * For YAS530 and YAS537 it was approximately measured. + * + * The temperatures "min_temp_x10" are derived from the temperature resolutions + * given in the data sheets. + */ +struct yas5xx_chip_info { + unsigned int devid; + const char *product_name; + const char *version_names[2]; + const int *volatile_reg; + int volatile_reg_qty; + u32 scaling_val2; + u16 t_ref; + s16 min_temp_x10; + int (*get_measure)(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo, s32 *zo); + int (*get_calibration_data)(struct yas5xx *yas5xx); + void (*dump_calibration)(struct yas5xx *yas5xx); + int (*measure_offsets)(struct yas5xx *yas5xx); + int (*power_on)(struct yas5xx *yas5xx); +}; + /** * struct yas5xx - state container for the YAS5xx driver * @dev: parent device pointer - * @devid: device ID number + * @chip_info: device-specific data and function pointers * @version: device version - * @name: device name * @calibration: calibration settings from the OTP storage * @hard_offsets: offsets for each axis measured with initcoil actuated * @orientation: mounting matrix, flipped axis etc @@ -128,11 +221,10 @@ struct yas5xx_calibration { */ struct yas5xx { struct device *dev; - unsigned int devid; + const struct yas5xx_chip_info *chip_info; unsigned int version; - char name[16]; struct yas5xx_calibration calibration; - u8 hard_offsets[3]; + s8 hard_offsets[3]; struct iio_mount_matrix orientation; struct regmap *map; struct regulator_bulk_data regs[2]; @@ -179,23 +271,26 @@ static u16 yas532_extract_axis(u8 *data) } /** - * yas5xx_measure() - Make a measure from the hardware + * yas530_measure() - Make a measure from the hardware * @yas5xx: The device state * @t: the raw temperature measurement * @x: the raw x axis measurement * @y1: the y1 axis measurement * @y2: the y2 axis measurement * @return: 0 on success or error code + * + * Used by YAS530, YAS532 and YAS533. */ -static int yas5xx_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y2) +static int yas530_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y2) { + const struct yas5xx_chip_info *ci = yas5xx->chip_info; unsigned int busy; u8 data[8]; int ret; u16 val; mutex_lock(&yas5xx->lock); - ret = regmap_write(yas5xx->map, YAS5XX_MEASURE, YAS5XX_MEASURE_START); + ret = regmap_write(yas5xx->map, YAS530_MEASURE, YAS5XX_MEASURE_START); if (ret < 0) goto out_unlock; @@ -219,7 +314,7 @@ static int yas5xx_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y mutex_unlock(&yas5xx->lock); - switch (yas5xx->devid) { + switch (ci->devid) { case YAS530_DEVICE_ID: /* * The t value is 9 bits in big endian format @@ -261,8 +356,81 @@ out_unlock: return ret; } -static s32 yas5xx_linearize(struct yas5xx *yas5xx, u16 val, int axis) +/** + * yas537_measure() - Make a measure from the hardware + * @yas5xx: The device state + * @t: the raw temperature measurement + * @x: the raw x axis measurement + * @y1: the y1 axis measurement + * @y2: the y2 axis measurement + * @return: 0 on success or error code + */ +static int yas537_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y2) +{ + struct yas5xx_calibration *c = &yas5xx->calibration; + unsigned int busy; + u8 data[8]; + u16 xy1y2[3]; + s32 h[3], s[3]; + int i, ret; + + mutex_lock(&yas5xx->lock); + + /* Contrary to YAS530/532, also a "cont" bit is set, meaning unknown */ + ret = regmap_write(yas5xx->map, YAS537_MEASURE, YAS5XX_MEASURE_START | + YAS5XX_MEASURE_CONT); + if (ret < 0) + goto out_unlock; + + /* Use same timeout like YAS530/532 but the bit is in data row 2 */ + ret = regmap_read_poll_timeout(yas5xx->map, YAS5XX_MEASURE_DATA + 2, busy, + !(busy & YAS5XX_MEASURE_DATA_BUSY), + 500, 20000); + if (ret) { + dev_err(yas5xx->dev, "timeout waiting for measurement\n"); + goto out_unlock; + } + + ret = regmap_bulk_read(yas5xx->map, YAS5XX_MEASURE_DATA, + data, sizeof(data)); + if (ret) + goto out_unlock; + + mutex_unlock(&yas5xx->lock); + + *t = get_unaligned_be16(&data[0]); + xy1y2[0] = FIELD_GET(GENMASK(13, 0), get_unaligned_be16(&data[2])); + xy1y2[1] = get_unaligned_be16(&data[4]); + xy1y2[2] = get_unaligned_be16(&data[6]); + + /* The second version of YAS537 needs to include calibration coefficients */ + if (yas5xx->version == YAS537_VERSION_1) { + for (i = 0; i < 3; i++) + s[i] = xy1y2[i] - BIT(13); + h[0] = (c->k * (128 * s[0] + c->a2 * s[1] + c->a3 * s[2])) / BIT(13); + h[1] = (c->k * (c->a4 * s[0] + c->a5 * s[1] + c->a6 * s[2])) / BIT(13); + h[2] = (c->k * (c->a7 * s[0] + c->a8 * s[1] + c->a9 * s[2])) / BIT(13); + for (i = 0; i < 3; i++) { + clamp_val(h[i], -BIT(13), BIT(13) - 1); + xy1y2[i] = h[i] + BIT(13); + } + } + + *x = xy1y2[0]; + *y1 = xy1y2[1]; + *y2 = xy1y2[2]; + + return 0; + +out_unlock: + mutex_unlock(&yas5xx->lock); + return ret; +} + +/* Used by YAS530, YAS532 and YAS533 */ +static s32 yas530_linearize(struct yas5xx *yas5xx, u16 val, int axis) { + const struct yas5xx_chip_info *ci = yas5xx->chip_info; struct yas5xx_calibration *c = &yas5xx->calibration; static const s32 yas532ac_coef[] = { YAS532_VERSION_AC_COEF_X, @@ -272,7 +440,7 @@ static s32 yas5xx_linearize(struct yas5xx *yas5xx, u16 val, int axis) s32 coef; /* Select coefficients */ - switch (yas5xx->devid) { + switch (ci->devid) { case YAS530_DEVICE_ID: if (yas5xx->version == YAS530_VERSION_A) coef = YAS530_VERSION_A_COEF; @@ -302,8 +470,24 @@ static s32 yas5xx_linearize(struct yas5xx *yas5xx, u16 val, int axis) (yas5xx->hard_offsets[axis] - c->r[axis]) * coef; } +static s32 yas5xx_calc_temperature(struct yas5xx *yas5xx, u16 t) +{ + const struct yas5xx_chip_info *ci = yas5xx->chip_info; + s32 to; + u16 t_ref; + s16 min_temp_x10; + int ref_temp_x10; + + t_ref = ci->t_ref; + min_temp_x10 = ci->min_temp_x10; + ref_temp_x10 = 200; + + to = (min_temp_x10 + ((ref_temp_x10 - min_temp_x10) * t / t_ref)) * 100; + return to; +} + /** - * yas5xx_get_measure() - Measure a sample of all axis and process + * yas530_get_measure() - Measure a sample of all axis and process * @yas5xx: The device state * @to: Temperature out * @xo: X axis out @@ -311,36 +495,50 @@ static s32 yas5xx_linearize(struct yas5xx *yas5xx, u16 val, int axis) * @zo: Z axis out * @return: 0 on success or error code * - * Returned values are in nanotesla according to some code. + * Used by YAS530, YAS532 and YAS533. */ -static int yas5xx_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo, s32 *zo) +static int yas530_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo, s32 *zo) { + const struct yas5xx_chip_info *ci = yas5xx->chip_info; struct yas5xx_calibration *c = &yas5xx->calibration; - u16 t, x, y1, y2; - /* These are "signed x, signed y1 etc */ + u16 t_ref, t_comp, t, x, y1, y2; + /* These are signed x, signed y1 etc */ s32 sx, sy1, sy2, sy, sz; int ret; /* We first get raw data that needs to be translated to [x,y,z] */ - ret = yas5xx_measure(yas5xx, &t, &x, &y1, &y2); + ret = yas530_measure(yas5xx, &t, &x, &y1, &y2); if (ret) return ret; /* Do some linearization if available */ - sx = yas5xx_linearize(yas5xx, x, 0); - sy1 = yas5xx_linearize(yas5xx, y1, 1); - sy2 = yas5xx_linearize(yas5xx, y2, 2); + sx = yas530_linearize(yas5xx, x, 0); + sy1 = yas530_linearize(yas5xx, y1, 1); + sy2 = yas530_linearize(yas5xx, y2, 2); + + /* + * Set the temperature for compensation (unit: counts): + * YAS532/YAS533 version AC uses the temperature deviation as a + * multiplier. YAS530 and YAS532 version AB use solely the t value. + */ + t_ref = ci->t_ref; + if (ci->devid == YAS532_DEVICE_ID && + yas5xx->version == YAS532_VERSION_AC) { + t_comp = t - t_ref; + } else { + t_comp = t; + } /* * Temperature compensation for x, y1, y2 respectively: * - * Cx * t - * x' = x - ------ - * 100 + * Cx * t_comp + * x' = x - ----------- + * 100 */ - sx = sx - (c->Cx * t) / 100; - sy1 = sy1 - (c->Cy1 * t) / 100; - sy2 = sy2 - (c->Cy2 * t) / 100; + sx = sx - (c->Cx * t_comp) / 100; + sy1 = sy1 - (c->Cy1 * t_comp) / 100; + sy2 = sy2 - (c->Cy2 * t_comp) / 100; /* * Break y1 and y2 into y and z, y1 and y2 are apparently encoding @@ -349,11 +547,9 @@ static int yas5xx_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo, sy = sy1 - sy2; sz = -sy1 - sy2; - /* - * FIXME: convert to Celsius? Just guessing this is given - * as 1/10:s of degrees so multiply by 100 to get millicentigrades. - */ - *to = t * 100; + /* Calculate temperature readout */ + *to = yas5xx_calc_temperature(yas5xx, t); + /* * Calibrate [x,y,z] with some formulas like this: * @@ -376,19 +572,56 @@ static int yas5xx_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo, return 0; } +/** + * yas537_get_measure() - Measure a sample of all axis and process + * @yas5xx: The device state + * @to: Temperature out + * @xo: X axis out + * @yo: Y axis out + * @zo: Z axis out + * @return: 0 on success or error code + */ +static int yas537_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo, s32 *zo) +{ + u16 t, x, y1, y2; + int ret; + + /* We first get raw data that needs to be translated to [x,y,z] */ + ret = yas537_measure(yas5xx, &t, &x, &y1, &y2); + if (ret) + return ret; + + /* Calculate temperature readout */ + *to = yas5xx_calc_temperature(yas5xx, t); + + /* + * Unfortunately, no linearization or temperature compensation formulas + * are known for YAS537. + */ + + /* Calculate x, y, z from x, y1, y2 */ + *xo = (x - BIT(13)) * 300; + *yo = (y1 - y2) * 1732 / 10; + *zo = (-y1 - y2 + BIT(14)) * 300; + + return 0; +} + static int yas5xx_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) { struct yas5xx *yas5xx = iio_priv(indio_dev); + const struct yas5xx_chip_info *ci = yas5xx->chip_info; s32 t, x, y, z; int ret; switch (mask) { + case IIO_CHAN_INFO_PROCESSED: case IIO_CHAN_INFO_RAW: pm_runtime_get_sync(yas5xx->dev); - ret = yas5xx_get_measure(yas5xx, &t, &x, &y, &z); + ret = ci->get_measure(yas5xx, &t, &x, &y, &z); pm_runtime_mark_last_busy(yas5xx->dev); pm_runtime_put_autosuspend(yas5xx->dev); if (ret) @@ -412,19 +645,8 @@ static int yas5xx_read_raw(struct iio_dev *indio_dev, } return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: - if (chan->address == 0) { - /* Temperature is unscaled */ - *val = 1; - return IIO_VAL_INT; - } - /* - * The axis values are in nanotesla according to the vendor - * drivers, but is clearly in microtesla according to - * experiments. Since 1 uT = 0.01 Gauss, we need to divide - * by 100000000 (10^8) to get to Gauss from the raw value. - */ *val = 1; - *val2 = 100000000; + *val2 = ci->scaling_val2; return IIO_VAL_FRACTIONAL; default: /* Unknown request */ @@ -435,11 +657,12 @@ static int yas5xx_read_raw(struct iio_dev *indio_dev, static void yas5xx_fill_buffer(struct iio_dev *indio_dev) { struct yas5xx *yas5xx = iio_priv(indio_dev); + const struct yas5xx_chip_info *ci = yas5xx->chip_info; s32 t, x, y, z; int ret; pm_runtime_get_sync(yas5xx->dev); - ret = yas5xx_get_measure(yas5xx, &t, &x, &y, &z); + ret = ci->get_measure(yas5xx, &t, &x, &y, &z); pm_runtime_mark_last_busy(yas5xx->dev); pm_runtime_put_autosuspend(yas5xx->dev); if (ret) { @@ -505,7 +728,7 @@ static const struct iio_chan_spec yas5xx_channels[] = { .address = 0, .scan_index = 0, .scan_type = { - .sign = 'u', + .sign = 's', .realbits = 32, .storagebits = 32, .endianness = IIO_CPU, @@ -525,9 +748,26 @@ static const struct iio_info yas5xx_info = { static bool yas5xx_volatile_reg(struct device *dev, unsigned int reg) { - return reg == YAS5XX_ACTUATE_INIT_COIL || - reg == YAS5XX_MEASURE || - (reg >= YAS5XX_MEASURE_DATA && reg <= YAS5XX_MEASURE_DATA + 8); + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct yas5xx *yas5xx = iio_priv(indio_dev); + const struct yas5xx_chip_info *ci = yas5xx->chip_info; + int reg_qty; + int i; + + if (reg >= YAS5XX_MEASURE_DATA && reg < YAS5XX_MEASURE_DATA + 8) + return true; + + /* + * YAS versions share different registers on the same address, + * need to differentiate. + */ + reg_qty = ci->volatile_reg_qty; + for (i = 0; i < reg_qty; i++) { + if (reg == ci->volatile_reg[i]) + return true; + } + + return false; } /* TODO: enable regmap cache, using mark dirty and sync at runtime resume */ @@ -539,11 +779,13 @@ static const struct regmap_config yas5xx_regmap_config = { }; /** - * yas53x_extract_calibration() - extracts the a2-a9 and k calibration + * yas530_extract_calibration() - extracts the a2-a9 and k calibration * @data: the bitfield to use * @c: the calibration to populate + * + * Used by YAS530, YAS532 and YAS533. */ -static void yas53x_extract_calibration(u8 *data, struct yas5xx_calibration *c) +static void yas530_extract_calibration(u8 *data, struct yas5xx_calibration *c) { u64 val = get_unaligned_be64(data); @@ -581,24 +823,27 @@ static int yas530_get_calibration_data(struct yas5xx *yas5xx) int ret; /* Dummy read, first read is ALWAYS wrong */ - ret = regmap_bulk_read(yas5xx->map, YAS5XX_CAL, data, sizeof(data)); + ret = regmap_bulk_read(yas5xx->map, YAS530_CAL, data, sizeof(data)); if (ret) return ret; /* Actual calibration readout */ - ret = regmap_bulk_read(yas5xx->map, YAS5XX_CAL, data, sizeof(data)); + ret = regmap_bulk_read(yas5xx->map, YAS530_CAL, data, sizeof(data)); if (ret) return ret; - dev_dbg(yas5xx->dev, "calibration data: %*ph\n", 14, data); + dev_dbg(yas5xx->dev, "calibration data: %16ph\n", data); + /* Contribute calibration data to the input pool for kernel entropy */ add_device_randomness(data, sizeof(data)); + + /* Extract version */ yas5xx->version = data[15] & GENMASK(1, 0); /* Extract the calibration from the bitfield */ c->Cx = data[0] * 6 - 768; c->Cy1 = data[1] * 6 - 768; c->Cy2 = data[2] * 6 - 768; - yas53x_extract_calibration(&data[3], c); + yas530_extract_calibration(&data[3], c); /* * Extract linearization: @@ -618,6 +863,7 @@ static int yas530_get_calibration_data(struct yas5xx *yas5xx) c->r[0] = sign_extend32(FIELD_GET(GENMASK(28, 23), val), 5); c->r[1] = sign_extend32(FIELD_GET(GENMASK(20, 15), val), 5); c->r[2] = sign_extend32(FIELD_GET(GENMASK(12, 7), val), 5); + return 0; } @@ -629,22 +875,22 @@ static int yas532_get_calibration_data(struct yas5xx *yas5xx) int ret; /* Dummy read, first read is ALWAYS wrong */ - ret = regmap_bulk_read(yas5xx->map, YAS5XX_CAL, data, sizeof(data)); + ret = regmap_bulk_read(yas5xx->map, YAS530_CAL, data, sizeof(data)); if (ret) return ret; /* Actual calibration readout */ - ret = regmap_bulk_read(yas5xx->map, YAS5XX_CAL, data, sizeof(data)); + ret = regmap_bulk_read(yas5xx->map, YAS530_CAL, data, sizeof(data)); if (ret) return ret; - dev_dbg(yas5xx->dev, "calibration data: %*ph\n", 14, data); + dev_dbg(yas5xx->dev, "calibration data: %14ph\n", data); /* Sanity check, is this all zeroes? */ - if (memchr_inv(data, 0x00, 13) == NULL) { - if (!(data[13] & BIT(7))) - dev_warn(yas5xx->dev, "calibration is blank!\n"); - } + if (!memchr_inv(data, 0x00, 13) && !(data[13] & BIT(7))) + dev_warn(yas5xx->dev, "calibration is blank!\n"); + /* Contribute calibration data to the input pool for kernel entropy */ add_device_randomness(data, sizeof(data)); + /* Only one bit of version info reserved here as far as we know */ yas5xx->version = data[13] & BIT(0); @@ -652,7 +898,8 @@ static int yas532_get_calibration_data(struct yas5xx *yas5xx) c->Cx = data[0] * 10 - 1280; c->Cy1 = data[1] * 10 - 1280; c->Cy2 = data[2] * 10 - 1280; - yas53x_extract_calibration(&data[3], c); + yas530_extract_calibration(&data[3], c); + /* * Extract linearization: * Linearization layout in the 32 bits at byte 10: @@ -675,7 +922,204 @@ static int yas532_get_calibration_data(struct yas5xx *yas5xx) return 0; } -static void yas5xx_dump_calibration(struct yas5xx *yas5xx) +static int yas537_get_calibration_data(struct yas5xx *yas5xx) +{ + struct yas5xx_calibration *c = &yas5xx->calibration; + u8 data[17]; + u32 val1, val2, val3, val4; + int i, ret; + + /* Writing SRST register */ + ret = regmap_write(yas5xx->map, YAS537_SRST, BIT(1)); + if (ret) + return ret; + + /* Calibration readout, YAS537 needs one readout only */ + ret = regmap_bulk_read(yas5xx->map, YAS537_CAL, data, sizeof(data)); + if (ret) + return ret; + dev_dbg(yas5xx->dev, "calibration data: %17ph\n", data); + + /* Sanity check, is this all zeroes? */ + if (!memchr_inv(data, 0x00, 16) && !FIELD_GET(GENMASK(5, 0), data[16])) + dev_warn(yas5xx->dev, "calibration is blank!\n"); + + /* Contribute calibration data to the input pool for kernel entropy */ + add_device_randomness(data, sizeof(data)); + + /* Extract version information */ + yas5xx->version = FIELD_GET(GENMASK(7, 6), data[16]); + + /* There are two versions of YAS537 behaving differently */ + switch (yas5xx->version) { + case YAS537_VERSION_0: + /* + * The first version simply writes data back into registers: + * + * data[0] YAS537_MTC 0x93 + * data[1] 0x94 + * data[2] 0x95 + * data[3] 0x96 + * data[4] 0x97 + * data[5] 0x98 + * data[6] 0x99 + * data[7] 0x9a + * data[8] 0x9b + * data[9] 0x9c + * data[10] 0x9d + * data[11] YAS537_OC 0x9e + * + * data[12] YAS537_OFFSET_X 0x84 + * data[13] YAS537_OFFSET_Y1 0x85 + * data[14] YAS537_OFFSET_Y2 0x86 + * + * data[15] YAS537_HCK 0x88 + * data[16] YAS537_LCK 0x89 + */ + for (i = 0; i < 12; i++) { + ret = regmap_write(yas5xx->map, YAS537_MTC + i, + data[i]); + if (ret) + return ret; + } + for (i = 0; i < 3; i++) { + ret = regmap_write(yas5xx->map, YAS537_OFFSET_X + i, + data[i + 12]); + if (ret) + return ret; + yas5xx->hard_offsets[i] = data[i + 12]; + } + for (i = 0; i < 2; i++) { + ret = regmap_write(yas5xx->map, YAS537_HCK + i, + data[i + 15]); + if (ret) + return ret; + } + break; + case YAS537_VERSION_1: + /* + * The second version writes some data into registers but also + * extracts calibration coefficients. + * + * Registers being written: + * + * data[0] YAS537_MTC 0x93 + * data[1] YAS537_MTC+1 0x94 + * data[2] YAS537_MTC+2 0x95 + * data[3] YAS537_MTC+3 (partially) 0x96 + * + * data[12] YAS537_OFFSET_X 0x84 + * data[13] YAS537_OFFSET_Y1 0x85 + * data[14] YAS537_OFFSET_Y2 0x86 + * + * data[15] YAS537_HCK (partially) 0x88 + * YAS537_LCK (partially) 0x89 + * data[16] YAS537_OC (partially) 0x9e + */ + for (i = 0; i < 3; i++) { + ret = regmap_write(yas5xx->map, YAS537_MTC + i, + data[i]); + if (ret) + return ret; + } + for (i = 0; i < 3; i++) { + ret = regmap_write(yas5xx->map, YAS537_OFFSET_X + i, + data[i + 12]); + if (ret) + return ret; + yas5xx->hard_offsets[i] = data[i + 12]; + } + /* + * Visualization of partially taken data: + * + * data[3] n 7 6 5 4 3 2 1 0 + * YAS537_MTC+3 x x x 1 0 0 0 0 + * + * data[15] n 7 6 5 4 3 2 1 0 + * YAS537_HCK x x x x 0 + * + * data[15] n 7 6 5 4 3 2 1 0 + * YAS537_LCK x x x x 0 + * + * data[16] n 7 6 5 4 3 2 1 0 + * YAS537_OC x x x x x x + */ + ret = regmap_write(yas5xx->map, YAS537_MTC + 3, + FIELD_PREP(YAS537_MTC3_MASK_PREP, + FIELD_GET(YAS537_MTC3_MASK_GET, data[3])) | + YAS537_MTC3_ADD_BIT); + if (ret) + return ret; + ret = regmap_write(yas5xx->map, YAS537_HCK, + FIELD_PREP(YAS537_HCK_MASK_PREP, + FIELD_GET(YAS537_HCK_MASK_GET, data[15]))); + if (ret) + return ret; + ret = regmap_write(yas5xx->map, YAS537_LCK, + FIELD_PREP(YAS537_LCK_MASK_PREP, + FIELD_GET(YAS537_LCK_MASK_GET, data[15]))); + if (ret) + return ret; + ret = regmap_write(yas5xx->map, YAS537_OC, + FIELD_GET(YAS537_OC_MASK_GET, data[16])); + if (ret) + return ret; + /* + * For data extraction, build some blocks. Four 32-bit blocks + * look appropriate. + * + * n 7 6 5 4 3 2 1 0 + * data[0] 0 [ Cx Cx Cx Cx Cx Cx Cx Cx ] bits 31 .. 24 + * data[1] 1 [ Cx C1 C1 C1 C1 C1 C1 C1 ] bits 23 .. 16 + * data[2] 2 [ C1 C1 C2 C2 C2 C2 C2 C2 ] bits 15 .. 8 + * data[3] 3 [ C2 C2 C2 ] bits 7 .. 0 + * + * n 7 6 5 4 3 2 1 0 + * data[3] 0 [ a2 a2 a2 a2 a2 ] bits 31 .. 24 + * data[4] 1 [ a2 a2 a3 a3 a3 a3 a3 a3 ] bits 23 .. 16 + * data[5] 2 [ a3 a4 a4 a4 a4 a4 a4 a4 ] bits 15 .. 8 + * data[6] 3 [ a4 ] bits 7 .. 0 + * + * n 7 6 5 4 3 2 1 0 + * data[6] 0 [ a5 a5 a5 a5 a5 a5 a5 ] bits 31 .. 24 + * data[7] 1 [ a5 a5 a6 a6 a6 a6 a6 a6 ] bits 23 .. 16 + * data[8] 2 [ a6 a7 a7 a7 a7 a7 a7 a7 ] bits 15 .. 8 + * data[9] 3 [ a7 ] bits 7 .. 0 + * + * n 7 6 5 4 3 2 1 0 + * data[9] 0 [ a8 a8 a8 a8 a8 a8 a8 ] bits 31 .. 24 + * data[10] 1 [ a9 a9 a9 a9 a9 a9 a9 a9 ] bits 23 .. 16 + * data[11] 2 [ a9 k k k k k k k ] bits 15 .. 8 + * data[12] 3 [ ] bits 7 .. 0 + */ + val1 = get_unaligned_be32(&data[0]); + val2 = get_unaligned_be32(&data[3]); + val3 = get_unaligned_be32(&data[6]); + val4 = get_unaligned_be32(&data[9]); + /* Extract calibration coefficients and modify */ + c->Cx = FIELD_GET(GENMASK(31, 23), val1) - 256; + c->Cy1 = FIELD_GET(GENMASK(22, 14), val1) - 256; + c->Cy2 = FIELD_GET(GENMASK(13, 5), val1) - 256; + c->a2 = FIELD_GET(GENMASK(28, 22), val2) - 64; + c->a3 = FIELD_GET(GENMASK(21, 15), val2) - 64; + c->a4 = FIELD_GET(GENMASK(14, 7), val2) - 128; + c->a5 = FIELD_GET(GENMASK(30, 22), val3) - 112; + c->a6 = FIELD_GET(GENMASK(21, 15), val3) - 64; + c->a7 = FIELD_GET(GENMASK(14, 7), val3) - 128; + c->a8 = FIELD_GET(GENMASK(30, 24), val4) - 64; + c->a9 = FIELD_GET(GENMASK(23, 15), val4) - 112; + c->k = FIELD_GET(GENMASK(14, 8), val4); + break; + default: + dev_err(yas5xx->dev, "unknown version of YAS537\n"); + return -EINVAL; + } + + return 0; +} + +/* Used by YAS530, YAS532 and YAS533 */ +static void yas530_dump_calibration(struct yas5xx *yas5xx) { struct yas5xx_calibration *c = &yas5xx->calibration; @@ -698,20 +1142,42 @@ static void yas5xx_dump_calibration(struct yas5xx *yas5xx) dev_dbg(yas5xx->dev, "dck = %d\n", c->dck); } -static int yas5xx_set_offsets(struct yas5xx *yas5xx, s8 ox, s8 oy1, s8 oy2) +static void yas537_dump_calibration(struct yas5xx *yas5xx) +{ + struct yas5xx_calibration *c = &yas5xx->calibration; + + if (yas5xx->version == YAS537_VERSION_1) { + dev_dbg(yas5xx->dev, "Cx = %d\n", c->Cx); + dev_dbg(yas5xx->dev, "Cy1 = %d\n", c->Cy1); + dev_dbg(yas5xx->dev, "Cy2 = %d\n", c->Cy2); + dev_dbg(yas5xx->dev, "a2 = %d\n", c->a2); + dev_dbg(yas5xx->dev, "a3 = %d\n", c->a3); + dev_dbg(yas5xx->dev, "a4 = %d\n", c->a4); + dev_dbg(yas5xx->dev, "a5 = %d\n", c->a5); + dev_dbg(yas5xx->dev, "a6 = %d\n", c->a6); + dev_dbg(yas5xx->dev, "a7 = %d\n", c->a7); + dev_dbg(yas5xx->dev, "a8 = %d\n", c->a8); + dev_dbg(yas5xx->dev, "a9 = %d\n", c->a9); + dev_dbg(yas5xx->dev, "k = %d\n", c->k); + } +} + +/* Used by YAS530, YAS532 and YAS533 */ +static int yas530_set_offsets(struct yas5xx *yas5xx, s8 ox, s8 oy1, s8 oy2) { int ret; - ret = regmap_write(yas5xx->map, YAS5XX_OFFSET_X, ox); + ret = regmap_write(yas5xx->map, YAS530_OFFSET_X, ox); if (ret) return ret; - ret = regmap_write(yas5xx->map, YAS5XX_OFFSET_Y1, oy1); + ret = regmap_write(yas5xx->map, YAS530_OFFSET_Y1, oy1); if (ret) return ret; - return regmap_write(yas5xx->map, YAS5XX_OFFSET_Y2, oy2); + return regmap_write(yas5xx->map, YAS530_OFFSET_Y2, oy2); } -static s8 yas5xx_adjust_offset(s8 old, int bit, u16 center, u16 measure) +/* Used by YAS530, YAS532 and YAS533 */ +static s8 yas530_adjust_offset(s8 old, int bit, u16 center, u16 measure) { if (measure > center) return old + BIT(bit); @@ -720,8 +1186,10 @@ static s8 yas5xx_adjust_offset(s8 old, int bit, u16 center, u16 measure) return old; } -static int yas5xx_meaure_offsets(struct yas5xx *yas5xx) +/* Used by YAS530, YAS532 and YAS533 */ +static int yas530_measure_offsets(struct yas5xx *yas5xx) { + const struct yas5xx_chip_info *ci = yas5xx->chip_info; int ret; u16 center; u16 t, x, y1, y2; @@ -729,12 +1197,12 @@ static int yas5xx_meaure_offsets(struct yas5xx *yas5xx) int i; /* Actuate the init coil and measure offsets */ - ret = regmap_write(yas5xx->map, YAS5XX_ACTUATE_INIT_COIL, 0); + ret = regmap_write(yas5xx->map, YAS530_ACTUATE_INIT_COIL, 0); if (ret) return ret; /* When the initcoil is active this should be around the center */ - switch (yas5xx->devid) { + switch (ci->devid) { case YAS530_DEVICE_ID: center = YAS530_DATA_CENTER; break; @@ -763,26 +1231,26 @@ static int yas5xx_meaure_offsets(struct yas5xx *yas5xx) oy2 = 0; for (i = 4; i >= 0; i--) { - ret = yas5xx_set_offsets(yas5xx, ox, oy1, oy2); + ret = yas530_set_offsets(yas5xx, ox, oy1, oy2); if (ret) return ret; - ret = yas5xx_measure(yas5xx, &t, &x, &y1, &y2); + ret = yas530_measure(yas5xx, &t, &x, &y1, &y2); if (ret) return ret; dev_dbg(yas5xx->dev, "measurement %d: x=%d, y1=%d, y2=%d\n", 5-i, x, y1, y2); - ox = yas5xx_adjust_offset(ox, i, center, x); - oy1 = yas5xx_adjust_offset(oy1, i, center, y1); - oy2 = yas5xx_adjust_offset(oy2, i, center, y2); + ox = yas530_adjust_offset(ox, i, center, x); + oy1 = yas530_adjust_offset(oy1, i, center, y1); + oy2 = yas530_adjust_offset(oy2, i, center, y2); } /* Needed for calibration algorithm */ yas5xx->hard_offsets[0] = ox; yas5xx->hard_offsets[1] = oy1; yas5xx->hard_offsets[2] = oy2; - ret = yas5xx_set_offsets(yas5xx, ox, oy1, oy2); + ret = yas530_set_offsets(yas5xx, ox, oy1, oy2); if (ret) return ret; @@ -791,35 +1259,139 @@ static int yas5xx_meaure_offsets(struct yas5xx *yas5xx) return 0; } -static int yas5xx_power_on(struct yas5xx *yas5xx) +/* Used by YAS530, YAS532 and YAS533 */ +static int yas530_power_on(struct yas5xx *yas5xx) { unsigned int val; int ret; /* Zero the test registers */ - ret = regmap_write(yas5xx->map, YAS5XX_TEST1, 0); + ret = regmap_write(yas5xx->map, YAS530_TEST1, 0); if (ret) return ret; - ret = regmap_write(yas5xx->map, YAS5XX_TEST2, 0); + ret = regmap_write(yas5xx->map, YAS530_TEST2, 0); if (ret) return ret; /* Set up for no interrupts, calibrated clock divider */ val = FIELD_PREP(YAS5XX_CONFIG_CCK_MASK, yas5xx->calibration.dck); - ret = regmap_write(yas5xx->map, YAS5XX_CONFIG, val); + ret = regmap_write(yas5xx->map, YAS530_CONFIG, val); if (ret) return ret; /* Measure interval 0 (back-to-back?) */ - return regmap_write(yas5xx->map, YAS5XX_MEASURE_INTERVAL, 0); + return regmap_write(yas5xx->map, YAS530_MEASURE_INTERVAL, 0); } +static int yas537_power_on(struct yas5xx *yas5xx) +{ + __be16 buf; + int ret; + u8 intrvl; + + /* Writing ADCCAL and TRM registers */ + buf = cpu_to_be16(GENMASK(9, 3)); + ret = regmap_bulk_write(yas5xx->map, YAS537_ADCCAL, &buf, sizeof(buf)); + if (ret) + return ret; + ret = regmap_write(yas5xx->map, YAS537_TRM, GENMASK(7, 0)); + if (ret) + return ret; + + /* The interval value is static in regular operation */ + intrvl = (YAS537_DEFAULT_SENSOR_DELAY_MS * MILLI + - YAS537_MEASURE_TIME_WORST_US) / 4100; + ret = regmap_write(yas5xx->map, YAS537_MEASURE_INTERVAL, intrvl); + if (ret) + return ret; + + /* The average value is also static in regular operation */ + ret = regmap_write(yas5xx->map, YAS537_AVR, YAS537_MAG_AVERAGE_32_MASK); + if (ret) + return ret; + + /* Perform the "rcoil" part but skip the "last_after_rcoil" read */ + ret = regmap_write(yas5xx->map, YAS537_CONFIG, BIT(3)); + if (ret) + return ret; + + /* Wait until the coil has ramped up */ + usleep_range(YAS537_MAG_RCOIL_TIME_US, YAS537_MAG_RCOIL_TIME_US + 100); + + return 0; +} + +static const struct yas5xx_chip_info yas5xx_chip_info_tbl[] = { + [yas530] = { + .devid = YAS530_DEVICE_ID, + .product_name = "YAS530 MS-3E", + .version_names = { "A", "B" }, + .volatile_reg = yas530_volatile_reg, + .volatile_reg_qty = ARRAY_SIZE(yas530_volatile_reg), + .scaling_val2 = 100000000, /* picotesla to Gauss */ + .t_ref = 182, /* counts */ + .min_temp_x10 = -620, /* 1/10:s degrees Celsius */ + .get_measure = yas530_get_measure, + .get_calibration_data = yas530_get_calibration_data, + .dump_calibration = yas530_dump_calibration, + .measure_offsets = yas530_measure_offsets, + .power_on = yas530_power_on, + }, + [yas532] = { + .devid = YAS532_DEVICE_ID, + .product_name = "YAS532 MS-3R", + .version_names = { "AB", "AC" }, + .volatile_reg = yas530_volatile_reg, + .volatile_reg_qty = ARRAY_SIZE(yas530_volatile_reg), + .scaling_val2 = 100000, /* nanotesla to Gauss */ + .t_ref = 390, /* counts */ + .min_temp_x10 = -500, /* 1/10:s degrees Celsius */ + .get_measure = yas530_get_measure, + .get_calibration_data = yas532_get_calibration_data, + .dump_calibration = yas530_dump_calibration, + .measure_offsets = yas530_measure_offsets, + .power_on = yas530_power_on, + }, + [yas533] = { + .devid = YAS532_DEVICE_ID, + .product_name = "YAS533 MS-3F", + .version_names = { "AB", "AC" }, + .volatile_reg = yas530_volatile_reg, + .volatile_reg_qty = ARRAY_SIZE(yas530_volatile_reg), + .scaling_val2 = 100000, /* nanotesla to Gauss */ + .t_ref = 390, /* counts */ + .min_temp_x10 = -500, /* 1/10:s degrees Celsius */ + .get_measure = yas530_get_measure, + .get_calibration_data = yas532_get_calibration_data, + .dump_calibration = yas530_dump_calibration, + .measure_offsets = yas530_measure_offsets, + .power_on = yas530_power_on, + }, + [yas537] = { + .devid = YAS537_DEVICE_ID, + .product_name = "YAS537 MS-3T", + .version_names = { "v0", "v1" }, /* version naming unknown */ + .volatile_reg = yas537_volatile_reg, + .volatile_reg_qty = ARRAY_SIZE(yas537_volatile_reg), + .scaling_val2 = 100000, /* nanotesla to Gauss */ + .t_ref = 8120, /* counts */ + .min_temp_x10 = -3860, /* 1/10:s degrees Celsius */ + .get_measure = yas537_get_measure, + .get_calibration_data = yas537_get_calibration_data, + .dump_calibration = yas537_dump_calibration, + /* .measure_offets is not needed for yas537 */ + .power_on = yas537_power_on, + }, +}; + static int yas5xx_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct iio_dev *indio_dev; struct device *dev = &i2c->dev; struct yas5xx *yas5xx; + const struct yas5xx_chip_info *ci; + int id_check; int ret; indio_dev = devm_iio_device_alloc(dev, sizeof(*yas5xx)); @@ -843,10 +1415,8 @@ static int yas5xx_probe(struct i2c_client *i2c, return dev_err_probe(dev, ret, "cannot get regulators\n"); ret = regulator_bulk_enable(ARRAY_SIZE(yas5xx->regs), yas5xx->regs); - if (ret) { - dev_err(dev, "cannot enable regulators\n"); - return ret; - } + if (ret) + return dev_err_probe(dev, ret, "cannot enable regulators\n"); /* See comment in runtime resume callback */ usleep_range(31000, 40000); @@ -854,57 +1424,55 @@ static int yas5xx_probe(struct i2c_client *i2c, /* This will take the device out of reset if need be */ yas5xx->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(yas5xx->reset)) { - ret = dev_err_probe(dev, PTR_ERR(yas5xx->reset), - "failed to get reset line\n"); + ret = dev_err_probe(dev, PTR_ERR(yas5xx->reset), "failed to get reset line\n"); goto reg_off; } yas5xx->map = devm_regmap_init_i2c(i2c, &yas5xx_regmap_config); if (IS_ERR(yas5xx->map)) { - dev_err(dev, "failed to allocate register map\n"); - ret = PTR_ERR(yas5xx->map); + ret = dev_err_probe(dev, PTR_ERR(yas5xx->map), "failed to allocate register map\n"); goto assert_reset; } - ret = regmap_read(yas5xx->map, YAS5XX_DEVICE_ID, &yas5xx->devid); + ci = device_get_match_data(dev); + if (!ci) + ci = (const struct yas5xx_chip_info *)id->driver_data; + yas5xx->chip_info = ci; + + ret = regmap_read(yas5xx->map, YAS5XX_DEVICE_ID, &id_check); if (ret) goto assert_reset; - switch (yas5xx->devid) { - case YAS530_DEVICE_ID: - ret = yas530_get_calibration_data(yas5xx); - if (ret) - goto assert_reset; - dev_info(dev, "detected YAS530 MS-3E %s", - yas5xx->version ? "B" : "A"); - strncpy(yas5xx->name, "yas530", sizeof(yas5xx->name)); - break; - case YAS532_DEVICE_ID: - ret = yas532_get_calibration_data(yas5xx); - if (ret) - goto assert_reset; - dev_info(dev, "detected YAS532/YAS533 MS-3R/F %s", - yas5xx->version ? "AC" : "AB"); - strncpy(yas5xx->name, "yas532", sizeof(yas5xx->name)); - break; - default: - ret = -ENODEV; - dev_err(dev, "unhandled device ID %02x\n", yas5xx->devid); + if (id_check != ci->devid) { + ret = dev_err_probe(dev, -ENODEV, + "device ID %02x doesn't match %s\n", + id_check, id->name); goto assert_reset; } - yas5xx_dump_calibration(yas5xx); - ret = yas5xx_power_on(yas5xx); + ret = ci->get_calibration_data(yas5xx); if (ret) goto assert_reset; - ret = yas5xx_meaure_offsets(yas5xx); + + dev_info(dev, "detected %s %s\n", ci->product_name, + ci->version_names[yas5xx->version]); + + ci->dump_calibration(yas5xx); + + ret = ci->power_on(yas5xx); if (ret) goto assert_reset; + if (ci->measure_offsets) { + ret = ci->measure_offsets(yas5xx); + if (ret) + goto assert_reset; + } + indio_dev->info = &yas5xx_info; indio_dev->available_scan_masks = yas5xx_scan_masks; indio_dev->modes = INDIO_DIRECT_MODE; - indio_dev->name = yas5xx->name; + indio_dev->name = id->name; indio_dev->channels = yas5xx_channels; indio_dev->num_channels = ARRAY_SIZE(yas5xx_channels); @@ -912,13 +1480,13 @@ static int yas5xx_probe(struct i2c_client *i2c, yas5xx_handle_trigger, NULL); if (ret) { - dev_err(dev, "triggered buffer setup failed\n"); + dev_err_probe(dev, ret, "triggered buffer setup failed\n"); goto assert_reset; } ret = iio_device_register(indio_dev); if (ret) { - dev_err(dev, "device register failed\n"); + dev_err_probe(dev, ret, "device register failed\n"); goto cleanup_buffer; } @@ -978,6 +1546,7 @@ static int yas5xx_runtime_resume(struct device *dev) { struct iio_dev *indio_dev = dev_get_drvdata(dev); struct yas5xx *yas5xx = iio_priv(indio_dev); + const struct yas5xx_chip_info *ci = yas5xx->chip_info; int ret; ret = regulator_bulk_enable(ARRAY_SIZE(yas5xx->regs), yas5xx->regs); @@ -994,7 +1563,7 @@ static int yas5xx_runtime_resume(struct device *dev) usleep_range(31000, 40000); gpiod_set_value_cansleep(yas5xx->reset, 0); - ret = yas5xx_power_on(yas5xx); + ret = ci->power_on(yas5xx); if (ret) { dev_err(dev, "cannot power on\n"); goto out_reset; @@ -1013,17 +1582,19 @@ static DEFINE_RUNTIME_DEV_PM_OPS(yas5xx_dev_pm_ops, yas5xx_runtime_suspend, yas5xx_runtime_resume, NULL); static const struct i2c_device_id yas5xx_id[] = { - {"yas530", }, - {"yas532", }, - {"yas533", }, + {"yas530", (kernel_ulong_t)&yas5xx_chip_info_tbl[yas530] }, + {"yas532", (kernel_ulong_t)&yas5xx_chip_info_tbl[yas532] }, + {"yas533", (kernel_ulong_t)&yas5xx_chip_info_tbl[yas533] }, + {"yas537", (kernel_ulong_t)&yas5xx_chip_info_tbl[yas537] }, {} }; MODULE_DEVICE_TABLE(i2c, yas5xx_id); static const struct of_device_id yas5xx_of_match[] = { - { .compatible = "yamaha,yas530", }, - { .compatible = "yamaha,yas532", }, - { .compatible = "yamaha,yas533", }, + { .compatible = "yamaha,yas530", &yas5xx_chip_info_tbl[yas530] }, + { .compatible = "yamaha,yas532", &yas5xx_chip_info_tbl[yas532] }, + { .compatible = "yamaha,yas533", &yas5xx_chip_info_tbl[yas533] }, + { .compatible = "yamaha,yas537", &yas5xx_chip_info_tbl[yas537] }, {} }; MODULE_DEVICE_TABLE(of, yas5xx_of_match); diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig index 0ff756cea63a..c9453389e4f7 100644 --- a/drivers/iio/pressure/Kconfig +++ b/drivers/iio/pressure/Kconfig @@ -17,14 +17,14 @@ config ABP060MG will be called abp060mg. config BMP280 - tristate "Bosch Sensortec BMP180/BMP280 pressure sensor I2C driver" + tristate "Bosch Sensortec BMP180/BMP280/BMP380 pressure sensor I2C driver" depends on (I2C || SPI_MASTER) select REGMAP select BMP280_I2C if (I2C) select BMP280_SPI if (SPI_MASTER) help - Say yes here to build support for Bosch Sensortec BMP180 and BMP280 - pressure and temperature sensors. Also supports the BME280 with + Say yes here to build support for Bosch Sensortec BMP180, BMP280 and + BMP380 pressure and temperature sensors. Also supports the BME280 with an additional humidity sensor channel. To compile this driver as a module, choose M here: the core module diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index fe7aa81e7cc9..c0aff78489b4 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -9,13 +9,22 @@ * Driver for Bosch Sensortec BMP180 and BMP280 digital pressure sensor. * * Datasheet: - * https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMP180-DS000-121.pdf - * https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMP280-DS001-12.pdf - * https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BME280_DS001-11.pdf + * https://cdn-shop.adafruit.com/datasheets/BST-BMP180-DS000-09.pdf + * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp280-ds001.pdf + * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bme280-ds002.pdf + * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp388-ds001.pdf + * + * Notice: + * The link to the bmp180 datasheet points to an outdated version missing these changes: + * - Changed document referral from ANP015 to BST-MPS-AN004-00 on page 26 + * - Updated equation for B3 param on section 3.5 to ((((long)AC1 * 4 + X3) << oss) + 2) / 4 + * - Updated RoHS directive to 2011/65/EU effective 8 June 2011 on page 26 */ #define pr_fmt(fmt) "bmp280: " fmt +#include <linux/bitops.h> +#include <linux/bitfield.h> #include <linux/device.h> #include <linux/module.h> #include <linux/regmap.h> @@ -30,6 +39,8 @@ #include <linux/pm_runtime.h> #include <linux/random.h> +#include <asm/unaligned.h> + #include "bmp280.h" /* @@ -74,12 +85,51 @@ struct bmp280_calib { s8 H6; }; +/* See datasheet Section 3.11.1. */ +struct bmp380_calib { + u16 T1; + u16 T2; + s8 T3; + s16 P1; + s16 P2; + s8 P3; + s8 P4; + u16 P5; + u16 P6; + s8 P7; + s8 P8; + s16 P9; + s8 P10; + s8 P11; +}; + static const char *const bmp280_supply_names[] = { "vddd", "vdda" }; #define BMP280_NUM_SUPPLIES ARRAY_SIZE(bmp280_supply_names) +enum bmp380_odr { + BMP380_ODR_200HZ, + BMP380_ODR_100HZ, + BMP380_ODR_50HZ, + BMP380_ODR_25HZ, + BMP380_ODR_12_5HZ, + BMP380_ODR_6_25HZ, + BMP380_ODR_3_125HZ, + BMP380_ODR_1_5625HZ, + BMP380_ODR_0_78HZ, + BMP380_ODR_0_39HZ, + BMP380_ODR_0_2HZ, + BMP380_ODR_0_1HZ, + BMP380_ODR_0_05HZ, + BMP380_ODR_0_02HZ, + BMP380_ODR_0_01HZ, + BMP380_ODR_0_006HZ, + BMP380_ODR_0_003HZ, + BMP380_ODR_0_0015HZ, +}; + struct bmp280_data { struct device *dev; struct mutex lock; @@ -90,6 +140,7 @@ struct bmp280_data { union { struct bmp180_calib bmp180; struct bmp280_calib bmp280; + struct bmp380_calib bmp380; } calib; struct regulator_bulk_data supplies[BMP280_NUM_SUPPLIES]; unsigned int start_up_time; /* in microseconds */ @@ -98,36 +149,99 @@ struct bmp280_data { u8 oversampling_press; u8 oversampling_temp; u8 oversampling_humid; + u8 iir_filter_coeff; + + /* + * BMP380 devices introduce sampling frequency configuration. See + * datasheet sections 3.3.3. and 4.3.19 for more details. + * + * BMx280 devices allowed indirect configuration of sampling frequency + * changing the t_standby duration between measurements, as detailed on + * section 3.6.3 of the datasheet. + */ + int sampling_freq; /* * Carryover value from temperature conversion, used in pressure * calculation. */ s32 t_fine; + + /* + * DMA (thus cache coherency maintenance) may require the + * transfer buffers to live in their own cache lines. + */ + union { + /* Sensor data buffer */ + u8 buf[3]; + /* Calibration data buffers */ + __le16 bmp280_cal_buf[BMP280_CONTIGUOUS_CALIB_REGS / 2]; + __be16 bmp180_cal_buf[BMP180_REG_CALIB_COUNT / 2]; + u8 bmp380_cal_buf[BMP380_CALIB_REG_COUNT]; + /* Miscellaneous, endianess-aware data buffers */ + __le16 le16; + __be16 be16; + } __aligned(IIO_DMA_MINALIGN); }; struct bmp280_chip_info { + unsigned int id_reg; + + const struct iio_chan_spec *channels; + int num_channels; + unsigned int start_up_time; + const int *oversampling_temp_avail; int num_oversampling_temp_avail; + int oversampling_temp_default; const int *oversampling_press_avail; int num_oversampling_press_avail; + int oversampling_press_default; const int *oversampling_humid_avail; int num_oversampling_humid_avail; + int oversampling_humid_default; + + const int *iir_filter_coeffs_avail; + int num_iir_filter_coeffs_avail; + int iir_filter_coeff_default; + + const int (*sampling_freq_avail)[2]; + int num_sampling_freq_avail; + int sampling_freq_default; int (*chip_config)(struct bmp280_data *); int (*read_temp)(struct bmp280_data *, int *); int (*read_press)(struct bmp280_data *, int *, int *); int (*read_humid)(struct bmp280_data *, int *, int *); + int (*read_calib)(struct bmp280_data *); }; /* * These enums are used for indexing into the array of compensation * parameters for BMP280. */ -enum { T1, T2, T3 }; -enum { P1, P2, P3, P4, P5, P6, P7, P8, P9 }; +enum { T1, T2, T3, P1, P2, P3, P4, P5, P6, P7, P8, P9 }; + +enum { + /* Temperature calib indexes */ + BMP380_T1 = 0, + BMP380_T2 = 2, + BMP380_T3 = 4, + /* Pressure calib indexes */ + BMP380_P1 = 5, + BMP380_P2 = 7, + BMP380_P3 = 9, + BMP380_P4 = 10, + BMP380_P5 = 11, + BMP380_P6 = 13, + BMP380_P7 = 15, + BMP380_P8 = 16, + BMP380_P9 = 17, + BMP380_P10 = 19, + BMP380_P11 = 20, +}; static const struct iio_chan_spec bmp280_channels[] = { { @@ -147,56 +261,81 @@ static const struct iio_chan_spec bmp280_channels[] = { }, }; -static int bmp280_read_calib(struct bmp280_data *data, - struct bmp280_calib *calib, - unsigned int chip) +static const struct iio_chan_spec bmp380_channels[] = { + { + .type = IIO_PRESSURE, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), + }, + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), + }, + { + .type = IIO_HUMIDITYRELATIVE, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), + }, +}; + +static int bmp280_read_calib(struct bmp280_data *data) { + struct bmp280_calib *calib = &data->calib.bmp280; int ret; - unsigned int tmp; - __le16 l16; - __be16 b16; - struct device *dev = data->dev; - __le16 t_buf[BMP280_COMP_TEMP_REG_COUNT / 2]; - __le16 p_buf[BMP280_COMP_PRESS_REG_COUNT / 2]; - /* Read temperature calibration values. */ + + /* Read temperature and pressure calibration values. */ ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_TEMP_START, - t_buf, BMP280_COMP_TEMP_REG_COUNT); + data->bmp280_cal_buf, sizeof(data->bmp280_cal_buf)); if (ret < 0) { dev_err(data->dev, - "failed to read temperature calibration parameters\n"); + "failed to read temperature and pressure calibration parameters\n"); return ret; } - /* Toss the temperature calibration data into the entropy pool */ - add_device_randomness(t_buf, sizeof(t_buf)); + /* Toss the temperature and pressure calibration data into the entropy pool */ + add_device_randomness(data->bmp280_cal_buf, sizeof(data->bmp280_cal_buf)); + + /* Parse temperature calibration values. */ + calib->T1 = le16_to_cpu(data->bmp280_cal_buf[T1]); + calib->T2 = le16_to_cpu(data->bmp280_cal_buf[T2]); + calib->T3 = le16_to_cpu(data->bmp280_cal_buf[T3]); + + /* Parse pressure calibration values. */ + calib->P1 = le16_to_cpu(data->bmp280_cal_buf[P1]); + calib->P2 = le16_to_cpu(data->bmp280_cal_buf[P2]); + calib->P3 = le16_to_cpu(data->bmp280_cal_buf[P3]); + calib->P4 = le16_to_cpu(data->bmp280_cal_buf[P4]); + calib->P5 = le16_to_cpu(data->bmp280_cal_buf[P5]); + calib->P6 = le16_to_cpu(data->bmp280_cal_buf[P6]); + calib->P7 = le16_to_cpu(data->bmp280_cal_buf[P7]); + calib->P8 = le16_to_cpu(data->bmp280_cal_buf[P8]); + calib->P9 = le16_to_cpu(data->bmp280_cal_buf[P9]); - calib->T1 = le16_to_cpu(t_buf[T1]); - calib->T2 = le16_to_cpu(t_buf[T2]); - calib->T3 = le16_to_cpu(t_buf[T3]); + return 0; +} - /* Read pressure calibration values. */ - ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_PRESS_START, - p_buf, BMP280_COMP_PRESS_REG_COUNT); - if (ret < 0) { - dev_err(data->dev, - "failed to read pressure calibration parameters\n"); +static int bme280_read_calib(struct bmp280_data *data) +{ + struct bmp280_calib *calib = &data->calib.bmp280; + struct device *dev = data->dev; + unsigned int tmp; + int ret; + + /* Load shared calibration params with bmp280 first */ + ret = bmp280_read_calib(data); + if (ret < 0) { + dev_err(dev, "failed to read common bmp280 calibration parameters\n"); return ret; } - /* Toss the pressure calibration data into the entropy pool */ - add_device_randomness(p_buf, sizeof(p_buf)); - - calib->P1 = le16_to_cpu(p_buf[P1]); - calib->P2 = le16_to_cpu(p_buf[P2]); - calib->P3 = le16_to_cpu(p_buf[P3]); - calib->P4 = le16_to_cpu(p_buf[P4]); - calib->P5 = le16_to_cpu(p_buf[P5]); - calib->P6 = le16_to_cpu(p_buf[P6]); - calib->P7 = le16_to_cpu(p_buf[P7]); - calib->P8 = le16_to_cpu(p_buf[P8]); - calib->P9 = le16_to_cpu(p_buf[P9]); - /* * Read humidity calibration values. * Due to some odd register addressing we cannot just @@ -204,8 +343,6 @@ static int bmp280_read_calib(struct bmp280_data *data, * value separately and sometimes do some bit shifting... * Humidity data is only available on BME280. */ - if (chip != BME280_CHIP_ID) - return 0; ret = regmap_read(data->regmap, BMP280_REG_COMP_H1, &tmp); if (ret < 0) { @@ -214,12 +351,13 @@ static int bmp280_read_calib(struct bmp280_data *data, } calib->H1 = tmp; - ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H2, &l16, 2); + ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H2, + &data->le16, sizeof(data->le16)); if (ret < 0) { dev_err(dev, "failed to read H2 comp value\n"); return ret; } - calib->H2 = sign_extend32(le16_to_cpu(l16), 15); + calib->H2 = sign_extend32(le16_to_cpu(data->le16), 15); ret = regmap_read(data->regmap, BMP280_REG_COMP_H3, &tmp); if (ret < 0) { @@ -228,20 +366,22 @@ static int bmp280_read_calib(struct bmp280_data *data, } calib->H3 = tmp; - ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H4, &b16, 2); + ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H4, + &data->be16, sizeof(data->be16)); if (ret < 0) { dev_err(dev, "failed to read H4 comp value\n"); return ret; } - calib->H4 = sign_extend32(((be16_to_cpu(b16) >> 4) & 0xff0) | - (be16_to_cpu(b16) & 0xf), 11); + calib->H4 = sign_extend32(((be16_to_cpu(data->be16) >> 4) & 0xff0) | + (be16_to_cpu(data->be16) & 0xf), 11); - ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H5, &l16, 2); + ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H5, + &data->le16, sizeof(data->le16)); if (ret < 0) { dev_err(dev, "failed to read H5 comp value\n"); return ret; } - calib->H5 = sign_extend32(((le16_to_cpu(l16) >> 4) & 0xfff), 11); + calib->H5 = sign_extend32(FIELD_GET(BMP280_COMP_H5_MASK, le16_to_cpu(data->le16)), 11); ret = regmap_read(data->regmap, BMP280_REG_COMP_H6, &tmp); if (ret < 0) { @@ -261,8 +401,8 @@ static int bmp280_read_calib(struct bmp280_data *data, static u32 bmp280_compensate_humidity(struct bmp280_data *data, s32 adc_humidity) { - s32 var; struct bmp280_calib *calib = &data->calib.bmp280; + s32 var; var = ((s32)data->t_fine) - (s32)76800; var = ((((adc_humidity << 14) - (calib->H4 << 20) - (calib->H5 * var)) @@ -286,8 +426,8 @@ static u32 bmp280_compensate_humidity(struct bmp280_data *data, static s32 bmp280_compensate_temp(struct bmp280_data *data, s32 adc_temp) { - s32 var1, var2; struct bmp280_calib *calib = &data->calib.bmp280; + s32 var1, var2; var1 = (((adc_temp >> 3) - ((s32)calib->T1 << 1)) * ((s32)calib->T2)) >> 11; @@ -309,8 +449,8 @@ static s32 bmp280_compensate_temp(struct bmp280_data *data, static u32 bmp280_compensate_press(struct bmp280_data *data, s32 adc_press) { - s64 var1, var2, p; struct bmp280_calib *calib = &data->calib.bmp280; + s64 var1, var2, p; var1 = ((s64)data->t_fine) - 128000; var2 = var1 * var1 * (s64)calib->P6; @@ -335,17 +475,17 @@ static u32 bmp280_compensate_press(struct bmp280_data *data, static int bmp280_read_temp(struct bmp280_data *data, int *val) { - int ret; - __be32 tmp = 0; s32 adc_temp, comp_temp; + int ret; - ret = regmap_bulk_read(data->regmap, BMP280_REG_TEMP_MSB, &tmp, 3); + ret = regmap_bulk_read(data->regmap, BMP280_REG_TEMP_MSB, + data->buf, sizeof(data->buf)); if (ret < 0) { dev_err(data->dev, "failed to read temperature\n"); return ret; } - adc_temp = be32_to_cpu(tmp) >> 12; + adc_temp = FIELD_GET(BMP280_MEAS_TRIM_MASK, get_unaligned_be24(data->buf)); if (adc_temp == BMP280_TEMP_SKIPPED) { /* reading was skipped */ dev_err(data->dev, "reading temperature skipped\n"); @@ -368,23 +508,23 @@ static int bmp280_read_temp(struct bmp280_data *data, static int bmp280_read_press(struct bmp280_data *data, int *val, int *val2) { - int ret; - __be32 tmp = 0; - s32 adc_press; u32 comp_press; + s32 adc_press; + int ret; /* Read and compensate temperature so we get a reading of t_fine. */ ret = bmp280_read_temp(data, NULL); if (ret < 0) return ret; - ret = regmap_bulk_read(data->regmap, BMP280_REG_PRESS_MSB, &tmp, 3); + ret = regmap_bulk_read(data->regmap, BMP280_REG_PRESS_MSB, + data->buf, sizeof(data->buf)); if (ret < 0) { dev_err(data->dev, "failed to read pressure\n"); return ret; } - adc_press = be32_to_cpu(tmp) >> 12; + adc_press = FIELD_GET(BMP280_MEAS_TRIM_MASK, get_unaligned_be24(data->buf)); if (adc_press == BMP280_PRESS_SKIPPED) { /* reading was skipped */ dev_err(data->dev, "reading pressure skipped\n"); @@ -400,23 +540,23 @@ static int bmp280_read_press(struct bmp280_data *data, static int bmp280_read_humid(struct bmp280_data *data, int *val, int *val2) { - __be16 tmp; - int ret; - s32 adc_humidity; u32 comp_humidity; + s32 adc_humidity; + int ret; /* Read and compensate temperature so we get a reading of t_fine. */ ret = bmp280_read_temp(data, NULL); if (ret < 0) return ret; - ret = regmap_bulk_read(data->regmap, BMP280_REG_HUMIDITY_MSB, &tmp, 2); + ret = regmap_bulk_read(data->regmap, BMP280_REG_HUMIDITY_MSB, + &data->be16, sizeof(data->be16)); if (ret < 0) { dev_err(data->dev, "failed to read humidity\n"); return ret; } - adc_humidity = be16_to_cpu(tmp); + adc_humidity = be16_to_cpu(data->be16); if (adc_humidity == BMP280_HUMIDITY_SKIPPED) { /* reading was skipped */ dev_err(data->dev, "reading humidity skipped\n"); @@ -433,8 +573,8 @@ static int bmp280_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) { - int ret; struct bmp280_data *data = iio_priv(indio_dev); + int ret; pm_runtime_get_sync(data->dev); mutex_lock(&data->lock); @@ -475,6 +615,25 @@ static int bmp280_read_raw(struct iio_dev *indio_dev, break; } break; + case IIO_CHAN_INFO_SAMP_FREQ: + if (!data->chip_info->sampling_freq_avail) { + ret = -EINVAL; + break; + } + + *val = data->chip_info->sampling_freq_avail[data->sampling_freq][0]; + *val2 = data->chip_info->sampling_freq_avail[data->sampling_freq][1]; + ret = IIO_VAL_INT_PLUS_MICRO; + break; + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: + if (!data->chip_info->iir_filter_coeffs_avail) { + ret = -EINVAL; + break; + } + + *val = (1 << data->iir_filter_coeff) - 1; + ret = IIO_VAL_INT; + break; default: ret = -EINVAL; break; @@ -490,15 +649,23 @@ static int bmp280_read_raw(struct iio_dev *indio_dev, static int bmp280_write_oversampling_ratio_humid(struct bmp280_data *data, int val) { - int i; const int *avail = data->chip_info->oversampling_humid_avail; const int n = data->chip_info->num_oversampling_humid_avail; + int ret, prev; + int i; for (i = 0; i < n; i++) { if (avail[i] == val) { + prev = data->oversampling_humid; data->oversampling_humid = ilog2(val); - return data->chip_info->chip_config(data); + ret = data->chip_info->chip_config(data); + if (ret) { + data->oversampling_humid = prev; + data->chip_info->chip_config(data); + return ret; + } + return 0; } } return -EINVAL; @@ -507,15 +674,23 @@ static int bmp280_write_oversampling_ratio_humid(struct bmp280_data *data, static int bmp280_write_oversampling_ratio_temp(struct bmp280_data *data, int val) { - int i; const int *avail = data->chip_info->oversampling_temp_avail; const int n = data->chip_info->num_oversampling_temp_avail; + int ret, prev; + int i; for (i = 0; i < n; i++) { if (avail[i] == val) { + prev = data->oversampling_temp; data->oversampling_temp = ilog2(val); - return data->chip_info->chip_config(data); + ret = data->chip_info->chip_config(data); + if (ret) { + data->oversampling_temp = prev; + data->chip_info->chip_config(data); + return ret; + } + return 0; } } return -EINVAL; @@ -524,15 +699,73 @@ static int bmp280_write_oversampling_ratio_temp(struct bmp280_data *data, static int bmp280_write_oversampling_ratio_press(struct bmp280_data *data, int val) { - int i; const int *avail = data->chip_info->oversampling_press_avail; const int n = data->chip_info->num_oversampling_press_avail; + int ret, prev; + int i; for (i = 0; i < n; i++) { if (avail[i] == val) { + prev = data->oversampling_press; data->oversampling_press = ilog2(val); - return data->chip_info->chip_config(data); + ret = data->chip_info->chip_config(data); + if (ret) { + data->oversampling_press = prev; + data->chip_info->chip_config(data); + return ret; + } + return 0; + } + } + return -EINVAL; +} + +static int bmp280_write_sampling_frequency(struct bmp280_data *data, + int val, int val2) +{ + const int (*avail)[2] = data->chip_info->sampling_freq_avail; + const int n = data->chip_info->num_sampling_freq_avail; + int ret, prev; + int i; + + for (i = 0; i < n; i++) { + if (avail[i][0] == val && avail[i][1] == val2) { + prev = data->sampling_freq; + data->sampling_freq = i; + + ret = data->chip_info->chip_config(data); + if (ret) { + data->sampling_freq = prev; + data->chip_info->chip_config(data); + return ret; + } + return 0; + } + } + return -EINVAL; +} + +static int bmp280_write_iir_filter_coeffs(struct bmp280_data *data, int val) +{ + const int *avail = data->chip_info->iir_filter_coeffs_avail; + const int n = data->chip_info->num_iir_filter_coeffs_avail; + int ret, prev; + int i; + + for (i = 0; i < n; i++) { + if (avail[i] - 1 == val) { + prev = data->iir_filter_coeff; + data->iir_filter_coeff = i; + + ret = data->chip_info->chip_config(data); + if (ret) { + data->iir_filter_coeff = prev; + data->chip_info->chip_config(data); + return ret; + + } + return 0; } } return -EINVAL; @@ -542,9 +775,15 @@ static int bmp280_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int val, int val2, long mask) { - int ret = 0; struct bmp280_data *data = iio_priv(indio_dev); + int ret = 0; + /* + * Helper functions to update sensor running configuration. + * If an error happens applying new settings, will try restore + * previous parameters to ensure the sensor is left in a known + * working configuration. + */ switch (mask) { case IIO_CHAN_INFO_OVERSAMPLING_RATIO: pm_runtime_get_sync(data->dev); @@ -567,6 +806,22 @@ static int bmp280_write_raw(struct iio_dev *indio_dev, pm_runtime_mark_last_busy(data->dev); pm_runtime_put_autosuspend(data->dev); break; + case IIO_CHAN_INFO_SAMP_FREQ: + pm_runtime_get_sync(data->dev); + mutex_lock(&data->lock); + ret = bmp280_write_sampling_frequency(data, val, val2); + mutex_unlock(&data->lock); + pm_runtime_mark_last_busy(data->dev); + pm_runtime_put_autosuspend(data->dev); + break; + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: + pm_runtime_get_sync(data->dev); + mutex_lock(&data->lock); + ret = bmp280_write_iir_filter_coeffs(data, val); + mutex_unlock(&data->lock); + pm_runtime_mark_last_busy(data->dev); + pm_runtime_put_autosuspend(data->dev); + break; default: return -EINVAL; } @@ -597,6 +852,17 @@ static int bmp280_read_avail(struct iio_dev *indio_dev, } *type = IIO_VAL_INT; return IIO_AVAIL_LIST; + case IIO_CHAN_INFO_SAMP_FREQ: + *vals = (const int *)data->chip_info->sampling_freq_avail; + *type = IIO_VAL_INT_PLUS_MICRO; + /* Values are stored in a 2D matrix */ + *length = data->chip_info->num_sampling_freq_avail; + return IIO_AVAIL_LIST; + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: + *vals = data->chip_info->iir_filter_coeffs_avail; + *type = IIO_VAL_INT; + *length = data->chip_info->num_iir_filter_coeffs_avail; + return IIO_AVAIL_LIST; default: return -EINVAL; } @@ -610,9 +876,9 @@ static const struct iio_info bmp280_info = { static int bmp280_chip_config(struct bmp280_data *data) { + u8 osrs = FIELD_PREP(BMP280_OSRS_TEMP_MASK, data->oversampling_temp + 1) | + FIELD_PREP(BMP280_OSRS_PRESS_MASK, data->oversampling_press + 1); int ret; - u8 osrs = BMP280_OSRS_TEMP_X(data->oversampling_temp + 1) | - BMP280_OSRS_PRESS_X(data->oversampling_press + 1); ret = regmap_write_bits(data->regmap, BMP280_REG_CTRL_MEAS, BMP280_OSRS_TEMP_MASK | @@ -640,21 +906,39 @@ static int bmp280_chip_config(struct bmp280_data *data) static const int bmp280_oversampling_avail[] = { 1, 2, 4, 8, 16 }; static const struct bmp280_chip_info bmp280_chip_info = { + .id_reg = BMP280_REG_ID, + .start_up_time = 2000, + .channels = bmp280_channels, + .num_channels = 2, + .oversampling_temp_avail = bmp280_oversampling_avail, .num_oversampling_temp_avail = ARRAY_SIZE(bmp280_oversampling_avail), + /* + * Oversampling config values on BMx280 have one additional setting + * that other generations of the family don't: + * The value 0 means the measurement is bypassed instead of + * oversampling set to x1. + * + * To account for this difference, and preserve the same common + * config logic, this is handled later on chip_config callback + * incrementing one unit the oversampling setting. + */ + .oversampling_temp_default = BMP280_OSRS_TEMP_2X - 1, .oversampling_press_avail = bmp280_oversampling_avail, .num_oversampling_press_avail = ARRAY_SIZE(bmp280_oversampling_avail), + .oversampling_press_default = BMP280_OSRS_PRESS_16X - 1, .chip_config = bmp280_chip_config, .read_temp = bmp280_read_temp, .read_press = bmp280_read_press, + .read_calib = bmp280_read_calib, }; static int bme280_chip_config(struct bmp280_data *data) { + u8 osrs = FIELD_PREP(BMP280_OSRS_HUMIDITY_MASK, data->oversampling_humid + 1); int ret; - u8 osrs = BMP280_OSRS_HUMIDITIY_X(data->oversampling_humid + 1); /* * Oversampling of humidity must be set before oversampling of @@ -670,27 +954,405 @@ static int bme280_chip_config(struct bmp280_data *data) } static const struct bmp280_chip_info bme280_chip_info = { + .id_reg = BMP280_REG_ID, + .start_up_time = 2000, + .channels = bmp280_channels, + .num_channels = 3, + .oversampling_temp_avail = bmp280_oversampling_avail, .num_oversampling_temp_avail = ARRAY_SIZE(bmp280_oversampling_avail), + .oversampling_temp_default = BMP280_OSRS_TEMP_2X - 1, .oversampling_press_avail = bmp280_oversampling_avail, .num_oversampling_press_avail = ARRAY_SIZE(bmp280_oversampling_avail), + .oversampling_press_default = BMP280_OSRS_PRESS_16X - 1, .oversampling_humid_avail = bmp280_oversampling_avail, .num_oversampling_humid_avail = ARRAY_SIZE(bmp280_oversampling_avail), + .oversampling_humid_default = BMP280_OSRS_HUMIDITY_16X - 1, .chip_config = bme280_chip_config, .read_temp = bmp280_read_temp, .read_press = bmp280_read_press, .read_humid = bmp280_read_humid, + .read_calib = bme280_read_calib, }; -static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas) +/* + * Helper function to send a command to BMP3XX sensors. + * + * Sensor processes commands written to the CMD register and signals + * execution result through "cmd_rdy" and "cmd_error" flags available on + * STATUS and ERROR registers. + */ +static int bmp380_cmd(struct bmp280_data *data, u8 cmd) +{ + unsigned int reg; + int ret; + + /* Check if device is ready to process a command */ + ret = regmap_read(data->regmap, BMP380_REG_STATUS, ®); + if (ret) { + dev_err(data->dev, "failed to read error register\n"); + return ret; + } + if (!(reg & BMP380_STATUS_CMD_RDY_MASK)) { + dev_err(data->dev, "device is not ready to accept commands\n"); + return -EBUSY; + } + + /* Send command to process */ + ret = regmap_write(data->regmap, BMP380_REG_CMD, cmd); + if (ret) { + dev_err(data->dev, "failed to send command to device\n"); + return ret; + } + /* Wait for 2ms for command to be processed */ + usleep_range(data->start_up_time, data->start_up_time + 100); + /* Check for command processing error */ + ret = regmap_read(data->regmap, BMP380_REG_ERROR, ®); + if (ret) { + dev_err(data->dev, "error reading ERROR reg\n"); + return ret; + } + if (reg & BMP380_ERR_CMD_MASK) { + dev_err(data->dev, "error processing command 0x%X\n", cmd); + return -EINVAL; + } + + return 0; +} + +/* + * Returns temperature in Celsius dregrees, resolution is 0.01º C. Output value of + * "5123" equals 51.2º C. t_fine carries fine temperature as global value. + * + * Taken from datasheet, Section Appendix 9, "Compensation formula" and repo + * https://github.com/BoschSensortec/BMP3-Sensor-API. + */ +static s32 bmp380_compensate_temp(struct bmp280_data *data, u32 adc_temp) +{ + s64 var1, var2, var3, var4, var5, var6, comp_temp; + struct bmp380_calib *calib = &data->calib.bmp380; + + var1 = ((s64) adc_temp) - (((s64) calib->T1) << 8); + var2 = var1 * ((s64) calib->T2); + var3 = var1 * var1; + var4 = var3 * ((s64) calib->T3); + var5 = (var2 << 18) + var4; + var6 = var5 >> 32; + data->t_fine = (s32) var6; + comp_temp = (var6 * 25) >> 14; + + comp_temp = clamp_val(comp_temp, BMP380_MIN_TEMP, BMP380_MAX_TEMP); + return (s32) comp_temp; +} + +/* + * Returns pressure in Pa as an unsigned 32 bit integer in fractional Pascal. + * Output value of "9528709" represents 9528709/100 = 95287.09 Pa = 952.8709 hPa. + * + * Taken from datasheet, Section 9.3. "Pressure compensation" and repository + * https://github.com/BoschSensortec/BMP3-Sensor-API. + */ +static u32 bmp380_compensate_press(struct bmp280_data *data, u32 adc_press) +{ + s64 var1, var2, var3, var4, var5, var6, offset, sensitivity; + struct bmp380_calib *calib = &data->calib.bmp380; + u32 comp_press; + + var1 = (s64)data->t_fine * (s64)data->t_fine; + var2 = var1 >> 6; + var3 = (var2 * ((s64) data->t_fine)) >> 8; + var4 = ((s64)calib->P8 * var3) >> 5; + var5 = ((s64)calib->P7 * var1) << 4; + var6 = ((s64)calib->P6 * (s64)data->t_fine) << 22; + offset = ((s64)calib->P5 << 47) + var4 + var5 + var6; + var2 = ((s64)calib->P4 * var3) >> 5; + var4 = ((s64)calib->P3 * var1) << 2; + var5 = ((s64)calib->P2 - ((s64)1 << 14)) * + ((s64)data->t_fine << 21); + sensitivity = (((s64) calib->P1 - ((s64) 1 << 14)) << 46) + + var2 + var4 + var5; + var1 = (sensitivity >> 24) * (s64)adc_press; + var2 = (s64)calib->P10 * (s64)data->t_fine; + var3 = var2 + ((s64)calib->P9 << 16); + var4 = (var3 * (s64)adc_press) >> 13; + + /* + * Dividing by 10 followed by multiplying by 10 to avoid + * possible overflow caused by (uncomp_data->pressure * partial_data4). + */ + var5 = ((s64)adc_press * div_s64(var4, 10)) >> 9; + var5 *= 10; + var6 = (s64)adc_press * (s64)adc_press; + var2 = ((s64)calib->P11 * var6) >> 16; + var3 = (var2 * (s64)adc_press) >> 7; + var4 = (offset >> 2) + var1 + var5 + var3; + comp_press = ((u64)var4 * 25) >> 40; + + comp_press = clamp_val(comp_press, BMP380_MIN_PRES, BMP380_MAX_PRES); + return comp_press; +} + +static int bmp380_read_temp(struct bmp280_data *data, int *val) +{ + s32 comp_temp; + u32 adc_temp; + int ret; + + ret = regmap_bulk_read(data->regmap, BMP380_REG_TEMP_XLSB, + data->buf, sizeof(data->buf)); + if (ret) { + dev_err(data->dev, "failed to read temperature\n"); + return ret; + } + + adc_temp = get_unaligned_le24(data->buf); + if (adc_temp == BMP380_TEMP_SKIPPED) { + dev_err(data->dev, "reading temperature skipped\n"); + return -EIO; + } + comp_temp = bmp380_compensate_temp(data, adc_temp); + + /* + * Val might be NULL if we're called by the read_press routine, + * who only cares about the carry over t_fine value. + */ + if (val) { + /* IIO reports temperatures in milli Celsius */ + *val = comp_temp * 10; + return IIO_VAL_INT; + } + + return 0; +} + +static int bmp380_read_press(struct bmp280_data *data, int *val, int *val2) +{ + s32 comp_press; + u32 adc_press; + int ret; + + /* Read and compensate for temperature so we get a reading of t_fine */ + ret = bmp380_read_temp(data, NULL); + if (ret) + return ret; + + ret = regmap_bulk_read(data->regmap, BMP380_REG_PRESS_XLSB, + data->buf, sizeof(data->buf)); + if (ret) { + dev_err(data->dev, "failed to read pressure\n"); + return ret; + } + + adc_press = get_unaligned_le24(data->buf); + if (adc_press == BMP380_PRESS_SKIPPED) { + dev_err(data->dev, "reading pressure skipped\n"); + return -EIO; + } + comp_press = bmp380_compensate_press(data, adc_press); + + *val = comp_press; + /* Compensated pressure is in cPa (centipascals) */ + *val2 = 100000; + + return IIO_VAL_FRACTIONAL; +} + +static int bmp380_read_calib(struct bmp280_data *data) +{ + struct bmp380_calib *calib = &data->calib.bmp380; + int ret; + + /* Read temperature and pressure calibration data */ + ret = regmap_bulk_read(data->regmap, BMP380_REG_CALIB_TEMP_START, + data->bmp380_cal_buf, sizeof(data->bmp380_cal_buf)); + if (ret) { + dev_err(data->dev, + "failed to read temperature calibration parameters\n"); + return ret; + } + + /* Toss the temperature calibration data into the entropy pool */ + add_device_randomness(data->bmp380_cal_buf, sizeof(data->bmp380_cal_buf)); + + /* Parse calibration values */ + calib->T1 = get_unaligned_le16(&data->bmp380_cal_buf[BMP380_T1]); + calib->T2 = get_unaligned_le16(&data->bmp380_cal_buf[BMP380_T2]); + calib->T3 = data->bmp380_cal_buf[BMP380_T3]; + calib->P1 = get_unaligned_le16(&data->bmp380_cal_buf[BMP380_P1]); + calib->P2 = get_unaligned_le16(&data->bmp380_cal_buf[BMP380_P2]); + calib->P3 = data->bmp380_cal_buf[BMP380_P3]; + calib->P4 = data->bmp380_cal_buf[BMP380_P4]; + calib->P5 = get_unaligned_le16(&data->bmp380_cal_buf[BMP380_P5]); + calib->P6 = get_unaligned_le16(&data->bmp380_cal_buf[BMP380_P6]); + calib->P7 = data->bmp380_cal_buf[BMP380_P7]; + calib->P8 = data->bmp380_cal_buf[BMP380_P8]; + calib->P9 = get_unaligned_le16(&data->bmp380_cal_buf[BMP380_P9]); + calib->P10 = data->bmp380_cal_buf[BMP380_P10]; + calib->P11 = data->bmp380_cal_buf[BMP380_P11]; + + return 0; +} + +static const int bmp380_odr_table[][2] = { + [BMP380_ODR_200HZ] = {200, 0}, + [BMP380_ODR_100HZ] = {100, 0}, + [BMP380_ODR_50HZ] = {50, 0}, + [BMP380_ODR_25HZ] = {25, 0}, + [BMP380_ODR_12_5HZ] = {12, 500000}, + [BMP380_ODR_6_25HZ] = {6, 250000}, + [BMP380_ODR_3_125HZ] = {3, 125000}, + [BMP380_ODR_1_5625HZ] = {1, 562500}, + [BMP380_ODR_0_78HZ] = {0, 781250}, + [BMP380_ODR_0_39HZ] = {0, 390625}, + [BMP380_ODR_0_2HZ] = {0, 195313}, + [BMP380_ODR_0_1HZ] = {0, 97656}, + [BMP380_ODR_0_05HZ] = {0, 48828}, + [BMP380_ODR_0_02HZ] = {0, 24414}, + [BMP380_ODR_0_01HZ] = {0, 12207}, + [BMP380_ODR_0_006HZ] = {0, 6104}, + [BMP380_ODR_0_003HZ] = {0, 3052}, + [BMP380_ODR_0_0015HZ] = {0, 1526}, +}; + +static int bmp380_chip_config(struct bmp280_data *data) { + bool change = false, aux; + unsigned int tmp; + u8 osrs; int ret; + + /* Configure power control register */ + ret = regmap_update_bits(data->regmap, BMP380_REG_POWER_CONTROL, + BMP380_CTRL_SENSORS_MASK, + BMP380_CTRL_SENSORS_PRESS_EN | + BMP380_CTRL_SENSORS_TEMP_EN); + if (ret) { + dev_err(data->dev, + "failed to write operation control register\n"); + return ret; + } + + /* Configure oversampling */ + osrs = FIELD_PREP(BMP380_OSRS_TEMP_MASK, data->oversampling_temp) | + FIELD_PREP(BMP380_OSRS_PRESS_MASK, data->oversampling_press); + + ret = regmap_update_bits_check(data->regmap, BMP380_REG_OSR, + BMP380_OSRS_TEMP_MASK | + BMP380_OSRS_PRESS_MASK, + osrs, &aux); + if (ret) { + dev_err(data->dev, "failed to write oversampling register\n"); + return ret; + } + change = change || aux; + + /* Configure output data rate */ + ret = regmap_update_bits_check(data->regmap, BMP380_REG_ODR, + BMP380_ODRS_MASK, data->sampling_freq, &aux); + if (ret) { + dev_err(data->dev, "failed to write ODR selection register\n"); + return ret; + } + change = change || aux; + + /* Set filter data */ + ret = regmap_update_bits_check(data->regmap, BMP380_REG_CONFIG, BMP380_FILTER_MASK, + FIELD_PREP(BMP380_FILTER_MASK, data->iir_filter_coeff), + &aux); + if (ret) { + dev_err(data->dev, "failed to write config register\n"); + return ret; + } + change = change || aux; + + if (change) { + /* + * The configurations errors are detected on the fly during a measurement + * cycle. If the sampling frequency is too low, it's faster to reset + * the measurement loop than wait until the next measurement is due. + * + * Resets sensor measurement loop toggling between sleep and normal + * operating modes. + */ + ret = regmap_write_bits(data->regmap, BMP380_REG_POWER_CONTROL, + BMP380_MODE_MASK, + FIELD_PREP(BMP380_MODE_MASK, BMP380_MODE_SLEEP)); + if (ret) { + dev_err(data->dev, "failed to set sleep mode\n"); + return ret; + } + usleep_range(2000, 2500); + ret = regmap_write_bits(data->regmap, BMP380_REG_POWER_CONTROL, + BMP380_MODE_MASK, + FIELD_PREP(BMP380_MODE_MASK, BMP380_MODE_NORMAL)); + if (ret) { + dev_err(data->dev, "failed to set normal mode\n"); + return ret; + } + /* + * Waits for measurement before checking configuration error flag. + * Selected longest measure time indicated in section 3.9.1 + * in the datasheet. + */ + msleep(80); + + /* Check config error flag */ + ret = regmap_read(data->regmap, BMP380_REG_ERROR, &tmp); + if (ret) { + dev_err(data->dev, + "failed to read error register\n"); + return ret; + } + if (tmp & BMP380_ERR_CONF_MASK) { + dev_warn(data->dev, + "sensor flagged configuration as incompatible\n"); + return -EINVAL; + } + } + + return 0; +} + +static const int bmp380_oversampling_avail[] = { 1, 2, 4, 8, 16, 32 }; +static const int bmp380_iir_filter_coeffs_avail[] = { 1, 2, 4, 8, 16, 32, 64, 128}; + +static const struct bmp280_chip_info bmp380_chip_info = { + .id_reg = BMP380_REG_ID, + .start_up_time = 2000, + .channels = bmp380_channels, + .num_channels = 2, + + .oversampling_temp_avail = bmp380_oversampling_avail, + .num_oversampling_temp_avail = ARRAY_SIZE(bmp380_oversampling_avail), + .oversampling_temp_default = ilog2(1), + + .oversampling_press_avail = bmp380_oversampling_avail, + .num_oversampling_press_avail = ARRAY_SIZE(bmp380_oversampling_avail), + .oversampling_press_default = ilog2(4), + + .sampling_freq_avail = bmp380_odr_table, + .num_sampling_freq_avail = ARRAY_SIZE(bmp380_odr_table) * 2, + .sampling_freq_default = BMP380_ODR_50HZ, + + .iir_filter_coeffs_avail = bmp380_iir_filter_coeffs_avail, + .num_iir_filter_coeffs_avail = ARRAY_SIZE(bmp380_iir_filter_coeffs_avail), + .iir_filter_coeff_default = 2, + + .chip_config = bmp380_chip_config, + .read_temp = bmp380_read_temp, + .read_press = bmp380_read_press, + .read_calib = bmp380_read_calib, +}; + +static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas) +{ const int conversion_time_max[] = { 4500, 7500, 13500, 25500 }; unsigned int delay_us; unsigned int ctrl; + int ret; if (data->use_eoc) reinit_completion(&data->done); @@ -710,7 +1372,7 @@ static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas) if (!ret) dev_err(data->dev, "timeout waiting for completion\n"); } else { - if (ctrl_meas == BMP180_MEAS_TEMP) + if (FIELD_GET(BMP180_MEAS_CTRL_MASK, ctrl_meas) == BMP180_MEAS_TEMP) delay_us = 4500; else delay_us = @@ -732,55 +1394,57 @@ static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas) static int bmp180_read_adc_temp(struct bmp280_data *data, int *val) { - __be16 tmp; int ret; - ret = bmp180_measure(data, BMP180_MEAS_TEMP); + ret = bmp180_measure(data, + FIELD_PREP(BMP180_MEAS_CTRL_MASK, BMP180_MEAS_TEMP) | + BMP180_MEAS_SCO); if (ret) return ret; - ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, &tmp, 2); + ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, + &data->be16, sizeof(data->be16)); if (ret) return ret; - *val = be16_to_cpu(tmp); + *val = be16_to_cpu(data->be16); return 0; } -static int bmp180_read_calib(struct bmp280_data *data, - struct bmp180_calib *calib) +static int bmp180_read_calib(struct bmp280_data *data) { + struct bmp180_calib *calib = &data->calib.bmp180; int ret; int i; - __be16 buf[BMP180_REG_CALIB_COUNT / 2]; - ret = regmap_bulk_read(data->regmap, BMP180_REG_CALIB_START, buf, - sizeof(buf)); + ret = regmap_bulk_read(data->regmap, BMP180_REG_CALIB_START, + data->bmp180_cal_buf, sizeof(data->bmp180_cal_buf)); if (ret < 0) return ret; /* None of the words has the value 0 or 0xFFFF */ - for (i = 0; i < ARRAY_SIZE(buf); i++) { - if (buf[i] == cpu_to_be16(0) || buf[i] == cpu_to_be16(0xffff)) + for (i = 0; i < ARRAY_SIZE(data->bmp180_cal_buf); i++) { + if (data->bmp180_cal_buf[i] == cpu_to_be16(0) || + data->bmp180_cal_buf[i] == cpu_to_be16(0xffff)) return -EIO; } /* Toss the calibration data into the entropy pool */ - add_device_randomness(buf, sizeof(buf)); - - calib->AC1 = be16_to_cpu(buf[AC1]); - calib->AC2 = be16_to_cpu(buf[AC2]); - calib->AC3 = be16_to_cpu(buf[AC3]); - calib->AC4 = be16_to_cpu(buf[AC4]); - calib->AC5 = be16_to_cpu(buf[AC5]); - calib->AC6 = be16_to_cpu(buf[AC6]); - calib->B1 = be16_to_cpu(buf[B1]); - calib->B2 = be16_to_cpu(buf[B2]); - calib->MB = be16_to_cpu(buf[MB]); - calib->MC = be16_to_cpu(buf[MC]); - calib->MD = be16_to_cpu(buf[MD]); + add_device_randomness(data->bmp180_cal_buf, sizeof(data->bmp180_cal_buf)); + + calib->AC1 = be16_to_cpu(data->bmp180_cal_buf[AC1]); + calib->AC2 = be16_to_cpu(data->bmp180_cal_buf[AC2]); + calib->AC3 = be16_to_cpu(data->bmp180_cal_buf[AC3]); + calib->AC4 = be16_to_cpu(data->bmp180_cal_buf[AC4]); + calib->AC5 = be16_to_cpu(data->bmp180_cal_buf[AC5]); + calib->AC6 = be16_to_cpu(data->bmp180_cal_buf[AC6]); + calib->B1 = be16_to_cpu(data->bmp180_cal_buf[B1]); + calib->B2 = be16_to_cpu(data->bmp180_cal_buf[B2]); + calib->MB = be16_to_cpu(data->bmp180_cal_buf[MB]); + calib->MC = be16_to_cpu(data->bmp180_cal_buf[MC]); + calib->MD = be16_to_cpu(data->bmp180_cal_buf[MD]); return 0; } @@ -793,8 +1457,8 @@ static int bmp180_read_calib(struct bmp280_data *data, */ static s32 bmp180_compensate_temp(struct bmp280_data *data, s32 adc_temp) { - s32 x1, x2; struct bmp180_calib *calib = &data->calib.bmp180; + s32 x1, x2; x1 = ((adc_temp - calib->AC6) * calib->AC5) >> 15; x2 = (calib->MC << 11) / (x1 + calib->MD); @@ -805,8 +1469,8 @@ static s32 bmp180_compensate_temp(struct bmp280_data *data, s32 adc_temp) static int bmp180_read_temp(struct bmp280_data *data, int *val) { - int ret; s32 adc_temp, comp_temp; + int ret; ret = bmp180_read_adc_temp(data, &adc_temp); if (ret) @@ -828,19 +1492,22 @@ static int bmp180_read_temp(struct bmp280_data *data, int *val) static int bmp180_read_adc_press(struct bmp280_data *data, int *val) { - int ret; - __be32 tmp = 0; u8 oss = data->oversampling_press; + int ret; - ret = bmp180_measure(data, BMP180_MEAS_PRESS_X(oss)); + ret = bmp180_measure(data, + FIELD_PREP(BMP180_MEAS_CTRL_MASK, BMP180_MEAS_PRESS) | + FIELD_PREP(BMP180_OSRS_PRESS_MASK, oss) | + BMP180_MEAS_SCO); if (ret) return ret; - ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, &tmp, 3); + ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, + data->buf, sizeof(data->buf)); if (ret) return ret; - *val = (be32_to_cpu(tmp) >> 8) >> (8 - oss); + *val = get_unaligned_be24(data->buf) >> (8 - oss); return 0; } @@ -852,11 +1519,11 @@ static int bmp180_read_adc_press(struct bmp280_data *data, int *val) */ static u32 bmp180_compensate_press(struct bmp280_data *data, s32 adc_press) { + struct bmp180_calib *calib = &data->calib.bmp180; + s32 oss = data->oversampling_press; s32 x1, x2, x3, p; s32 b3, b6; u32 b4, b7; - s32 oss = data->oversampling_press; - struct bmp180_calib *calib = &data->calib.bmp180; b6 = data->t_fine - 4000; x1 = (calib->B2 * (b6 * b6 >> 12)) >> 11; @@ -883,9 +1550,9 @@ static u32 bmp180_compensate_press(struct bmp280_data *data, s32 adc_press) static int bmp180_read_press(struct bmp280_data *data, int *val, int *val2) { - int ret; - s32 adc_press; u32 comp_press; + s32 adc_press; + int ret; /* Read and compensate temperature so we get a reading of t_fine. */ ret = bmp180_read_temp(data, NULL); @@ -913,17 +1580,25 @@ static const int bmp180_oversampling_temp_avail[] = { 1 }; static const int bmp180_oversampling_press_avail[] = { 1, 2, 4, 8 }; static const struct bmp280_chip_info bmp180_chip_info = { + .id_reg = BMP280_REG_ID, + .start_up_time = 2000, + .channels = bmp280_channels, + .num_channels = 2, + .oversampling_temp_avail = bmp180_oversampling_temp_avail, .num_oversampling_temp_avail = ARRAY_SIZE(bmp180_oversampling_temp_avail), + .oversampling_temp_default = 0, .oversampling_press_avail = bmp180_oversampling_press_avail, .num_oversampling_press_avail = ARRAY_SIZE(bmp180_oversampling_press_avail), + .oversampling_press_default = BMP180_MEAS_PRESS_8X, .chip_config = bmp180_chip_config, .read_temp = bmp180_read_temp, .read_press = bmp180_read_press, + .read_calib = bmp180_read_calib, }; static irqreturn_t bmp085_eoc_irq(int irq, void *d) @@ -990,11 +1665,12 @@ int bmp280_common_probe(struct device *dev, const char *name, int irq) { - int ret; + const struct bmp280_chip_info *chip_info; struct iio_dev *indio_dev; struct bmp280_data *data; - unsigned int chip_id; struct gpio_desc *gpiod; + unsigned int chip_id; + int ret; indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); if (!indio_dev) @@ -1005,36 +1681,36 @@ int bmp280_common_probe(struct device *dev, data->dev = dev; indio_dev->name = name; - indio_dev->channels = bmp280_channels; indio_dev->info = &bmp280_info; indio_dev->modes = INDIO_DIRECT_MODE; switch (chip) { case BMP180_CHIP_ID: - indio_dev->num_channels = 2; - data->chip_info = &bmp180_chip_info; - data->oversampling_press = ilog2(8); - data->oversampling_temp = ilog2(1); - data->start_up_time = 10000; + chip_info = &bmp180_chip_info; break; case BMP280_CHIP_ID: - indio_dev->num_channels = 2; - data->chip_info = &bmp280_chip_info; - data->oversampling_press = ilog2(16); - data->oversampling_temp = ilog2(2); - data->start_up_time = 2000; + chip_info = &bmp280_chip_info; break; case BME280_CHIP_ID: - indio_dev->num_channels = 3; - data->chip_info = &bme280_chip_info; - data->oversampling_press = ilog2(16); - data->oversampling_humid = ilog2(16); - data->oversampling_temp = ilog2(2); - data->start_up_time = 2000; + chip_info = &bme280_chip_info; + break; + case BMP380_CHIP_ID: + chip_info = &bmp380_chip_info; break; default: return -EINVAL; } + data->chip_info = chip_info; + + /* Apply initial values from chip info structure */ + indio_dev->channels = chip_info->channels; + indio_dev->num_channels = chip_info->num_channels; + data->oversampling_press = chip_info->oversampling_press_default; + data->oversampling_humid = chip_info->oversampling_humid_default; + data->oversampling_temp = chip_info->oversampling_temp_default; + data->iir_filter_coeff = chip_info->iir_filter_coeff_default; + data->sampling_freq = chip_info->sampling_freq_default; + data->start_up_time = chip_info->start_up_time; /* Bring up regulators */ regulator_bulk_set_supply_names(data->supplies, @@ -1071,7 +1747,8 @@ int bmp280_common_probe(struct device *dev, } data->regmap = regmap; - ret = regmap_read(regmap, BMP280_REG_ID, &chip_id); + + ret = regmap_read(regmap, data->chip_info->id_reg, &chip_id); if (ret < 0) return ret; if (chip_id != chip) { @@ -1080,6 +1757,13 @@ int bmp280_common_probe(struct device *dev, return -EINVAL; } + /* BMP3xx requires soft-reset as part of initialization */ + if (chip_id == BMP380_CHIP_ID) { + ret = bmp380_cmd(data, BMP380_CMD_SOFT_RESET); + if (ret < 0) + return ret; + } + ret = data->chip_info->chip_config(data); if (ret < 0) return ret; @@ -1091,21 +1775,11 @@ int bmp280_common_probe(struct device *dev, * non-volatile memory during production". Let's read them out at probe * time once. They will not change. */ - if (chip_id == BMP180_CHIP_ID) { - ret = bmp180_read_calib(data, &data->calib.bmp180); - if (ret < 0) { - dev_err(data->dev, - "failed to read calibration coefficients\n"); - return ret; - } - } else if (chip_id == BMP280_CHIP_ID || chip_id == BME280_CHIP_ID) { - ret = bmp280_read_calib(data, &data->calib.bmp280, chip_id); - if (ret < 0) { - dev_err(data->dev, - "failed to read calibration coefficients\n"); - return ret; - } - } + + ret = data->chip_info->read_calib(data); + if (ret < 0) + return dev_err_probe(data->dev, ret, + "failed to read calibration coefficients\n"); /* * Attempt to grab an optional EOC IRQ - only the BMP085 has this diff --git a/drivers/iio/pressure/bmp280-i2c.c b/drivers/iio/pressure/bmp280-i2c.c index bf4a7a617537..0c27211f3ea0 100644 --- a/drivers/iio/pressure/bmp280-i2c.c +++ b/drivers/iio/pressure/bmp280-i2c.c @@ -19,6 +19,9 @@ static int bmp280_i2c_probe(struct i2c_client *client, case BME280_CHIP_ID: regmap_config = &bmp280_regmap_config; break; + case BMP380_CHIP_ID: + regmap_config = &bmp380_regmap_config; + break; default: return -EINVAL; } @@ -37,19 +40,21 @@ static int bmp280_i2c_probe(struct i2c_client *client, } static const struct of_device_id bmp280_of_i2c_match[] = { - { .compatible = "bosch,bme280", .data = (void *)BME280_CHIP_ID }, - { .compatible = "bosch,bmp280", .data = (void *)BMP280_CHIP_ID }, - { .compatible = "bosch,bmp180", .data = (void *)BMP180_CHIP_ID }, { .compatible = "bosch,bmp085", .data = (void *)BMP180_CHIP_ID }, + { .compatible = "bosch,bmp180", .data = (void *)BMP180_CHIP_ID }, + { .compatible = "bosch,bmp280", .data = (void *)BMP280_CHIP_ID }, + { .compatible = "bosch,bme280", .data = (void *)BME280_CHIP_ID }, + { .compatible = "bosch,bmp380", .data = (void *)BMP380_CHIP_ID }, { }, }; MODULE_DEVICE_TABLE(of, bmp280_of_i2c_match); static const struct i2c_device_id bmp280_i2c_id[] = { - {"bmp280", BMP280_CHIP_ID }, - {"bmp180", BMP180_CHIP_ID }, {"bmp085", BMP180_CHIP_ID }, + {"bmp180", BMP180_CHIP_ID }, + {"bmp280", BMP280_CHIP_ID }, {"bme280", BME280_CHIP_ID }, + {"bmp380", BMP380_CHIP_ID }, { }, }; MODULE_DEVICE_TABLE(i2c, bmp280_i2c_id); diff --git a/drivers/iio/pressure/bmp280-regmap.c b/drivers/iio/pressure/bmp280-regmap.c index 969698518984..c98c67970265 100644 --- a/drivers/iio/pressure/bmp280-regmap.c +++ b/drivers/iio/pressure/bmp280-regmap.c @@ -72,6 +72,49 @@ static bool bmp280_is_volatile_reg(struct device *dev, unsigned int reg) } } +static bool bmp380_is_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case BMP380_REG_CMD: + case BMP380_REG_CONFIG: + case BMP380_REG_FIFO_CONFIG_1: + case BMP380_REG_FIFO_CONFIG_2: + case BMP380_REG_FIFO_WATERMARK_LSB: + case BMP380_REG_FIFO_WATERMARK_MSB: + case BMP380_REG_POWER_CONTROL: + case BMP380_REG_INT_CONTROL: + case BMP380_REG_IF_CONFIG: + case BMP380_REG_ODR: + case BMP380_REG_OSR: + return true; + default: + return false; + } +} + +static bool bmp380_is_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case BMP380_REG_TEMP_XLSB: + case BMP380_REG_TEMP_LSB: + case BMP380_REG_TEMP_MSB: + case BMP380_REG_PRESS_XLSB: + case BMP380_REG_PRESS_LSB: + case BMP380_REG_PRESS_MSB: + case BMP380_REG_SENSOR_TIME_XLSB: + case BMP380_REG_SENSOR_TIME_LSB: + case BMP380_REG_SENSOR_TIME_MSB: + case BMP380_REG_INT_STATUS: + case BMP380_REG_FIFO_DATA: + case BMP380_REG_STATUS: + case BMP380_REG_ERROR: + case BMP380_REG_EVENT: + return true; + default: + return false; + } +} + const struct regmap_config bmp280_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -83,3 +126,15 @@ const struct regmap_config bmp280_regmap_config = { .volatile_reg = bmp280_is_volatile_reg, }; EXPORT_SYMBOL_NS(bmp280_regmap_config, IIO_BMP280); + +const struct regmap_config bmp380_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = BMP380_REG_CMD, + .cache_type = REGCACHE_RBTREE, + + .writeable_reg = bmp380_is_writeable_reg, + .volatile_reg = bmp380_is_volatile_reg, +}; +EXPORT_SYMBOL_NS(bmp380_regmap_config, IIO_BMP280); diff --git a/drivers/iio/pressure/bmp280-spi.c b/drivers/iio/pressure/bmp280-spi.c index 4cfaf3e869b8..011c68e07ebf 100644 --- a/drivers/iio/pressure/bmp280-spi.c +++ b/drivers/iio/pressure/bmp280-spi.c @@ -66,6 +66,9 @@ static int bmp280_spi_probe(struct spi_device *spi) case BME280_CHIP_ID: regmap_config = &bmp280_regmap_config; break; + case BMP380_CHIP_ID: + regmap_config = &bmp380_regmap_config; + break; default: return -EINVAL; } @@ -92,6 +95,7 @@ static const struct of_device_id bmp280_of_spi_match[] = { { .compatible = "bosch,bmp181", }, { .compatible = "bosch,bmp280", }, { .compatible = "bosch,bme280", }, + { .compatible = "bosch,bmp380", }, { }, }; MODULE_DEVICE_TABLE(of, bmp280_of_spi_match); @@ -101,6 +105,7 @@ static const struct spi_device_id bmp280_spi_id[] = { { "bmp181", BMP180_CHIP_ID }, { "bmp280", BMP280_CHIP_ID }, { "bme280", BME280_CHIP_ID }, + { "bmp380", BMP380_CHIP_ID }, { } }; MODULE_DEVICE_TABLE(spi, bmp280_spi_id); diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h index 57ba0e85db91..c791325c7416 100644 --- a/drivers/iio/pressure/bmp280.h +++ b/drivers/iio/pressure/bmp280.h @@ -3,6 +3,87 @@ #include <linux/device.h> #include <linux/regmap.h> +/* BMP380 specific registers */ +#define BMP380_REG_CMD 0x7E +#define BMP380_REG_CONFIG 0x1F +#define BMP380_REG_ODR 0x1D +#define BMP380_REG_OSR 0x1C +#define BMP380_REG_POWER_CONTROL 0x1B +#define BMP380_REG_IF_CONFIG 0x1A +#define BMP380_REG_INT_CONTROL 0x19 +#define BMP380_REG_INT_STATUS 0x11 +#define BMP380_REG_EVENT 0x10 +#define BMP380_REG_STATUS 0x03 +#define BMP380_REG_ERROR 0x02 +#define BMP380_REG_ID 0x00 + +#define BMP380_REG_FIFO_CONFIG_1 0x18 +#define BMP380_REG_FIFO_CONFIG_2 0x17 +#define BMP380_REG_FIFO_WATERMARK_MSB 0x16 +#define BMP380_REG_FIFO_WATERMARK_LSB 0x15 +#define BMP380_REG_FIFO_DATA 0x14 +#define BMP380_REG_FIFO_LENGTH_MSB 0x13 +#define BMP380_REG_FIFO_LENGTH_LSB 0x12 + +#define BMP380_REG_SENSOR_TIME_MSB 0x0E +#define BMP380_REG_SENSOR_TIME_LSB 0x0D +#define BMP380_REG_SENSOR_TIME_XLSB 0x0C + +#define BMP380_REG_TEMP_MSB 0x09 +#define BMP380_REG_TEMP_LSB 0x08 +#define BMP380_REG_TEMP_XLSB 0x07 + +#define BMP380_REG_PRESS_MSB 0x06 +#define BMP380_REG_PRESS_LSB 0x05 +#define BMP380_REG_PRESS_XLSB 0x04 + +#define BMP380_REG_CALIB_TEMP_START 0x31 +#define BMP380_CALIB_REG_COUNT 21 + +#define BMP380_FILTER_MASK GENMASK(3, 1) +#define BMP380_FILTER_OFF 0 +#define BMP380_FILTER_1X 1 +#define BMP380_FILTER_3X 2 +#define BMP380_FILTER_7X 3 +#define BMP380_FILTER_15X 4 +#define BMP380_FILTER_31X 5 +#define BMP380_FILTER_63X 6 +#define BMP380_FILTER_127X 7 + +#define BMP380_OSRS_TEMP_MASK GENMASK(5, 3) +#define BMP380_OSRS_PRESS_MASK GENMASK(2, 0) + +#define BMP380_ODRS_MASK GENMASK(4, 0) + +#define BMP380_CTRL_SENSORS_MASK GENMASK(1, 0) +#define BMP380_CTRL_SENSORS_PRESS_EN BIT(0) +#define BMP380_CTRL_SENSORS_TEMP_EN BIT(1) +#define BMP380_MODE_MASK GENMASK(5, 4) +#define BMP380_MODE_SLEEP 0 +#define BMP380_MODE_FORCED 1 +#define BMP380_MODE_NORMAL 3 + +#define BMP380_MIN_TEMP -4000 +#define BMP380_MAX_TEMP 8500 +#define BMP380_MIN_PRES 3000000 +#define BMP380_MAX_PRES 12500000 + +#define BMP380_CMD_NOOP 0x00 +#define BMP380_CMD_EXTMODE_EN_MID 0x34 +#define BMP380_CMD_FIFO_FLUSH 0xB0 +#define BMP380_CMD_SOFT_RESET 0xB6 + +#define BMP380_STATUS_CMD_RDY_MASK BIT(4) +#define BMP380_STATUS_DRDY_PRESS_MASK BIT(5) +#define BMP380_STATUS_DRDY_TEMP_MASK BIT(6) + +#define BMP380_ERR_FATAL_MASK BIT(0) +#define BMP380_ERR_CMD_MASK BIT(1) +#define BMP380_ERR_CONF_MASK BIT(2) + +#define BMP380_TEMP_SKIPPED 0x800000 +#define BMP380_PRESS_SKIPPED 0x800000 + /* BMP280 specific registers */ #define BMP280_REG_HUMIDITY_LSB 0xFE #define BMP280_REG_HUMIDITY_MSB 0xFD @@ -13,6 +94,9 @@ #define BMP280_REG_PRESS_LSB 0xF8 #define BMP280_REG_PRESS_MSB 0xF7 +/* Helper mask to truncate excess 4 bits on pressure and temp readings */ +#define BMP280_MEAS_TRIM_MASK GENMASK(24, 4) + #define BMP280_REG_CONFIG 0xF5 #define BMP280_REG_CTRL_MEAS 0xF4 #define BMP280_REG_STATUS 0xF3 @@ -32,44 +116,46 @@ #define BMP280_REG_COMP_PRESS_START 0x8E #define BMP280_COMP_PRESS_REG_COUNT 18 -#define BMP280_FILTER_MASK (BIT(4) | BIT(3) | BIT(2)) +#define BMP280_COMP_H5_MASK GENMASK(15, 4) + +#define BMP280_CONTIGUOUS_CALIB_REGS (BMP280_COMP_TEMP_REG_COUNT + \ + BMP280_COMP_PRESS_REG_COUNT) + +#define BMP280_FILTER_MASK GENMASK(4, 2) #define BMP280_FILTER_OFF 0 -#define BMP280_FILTER_2X BIT(2) -#define BMP280_FILTER_4X BIT(3) -#define BMP280_FILTER_8X (BIT(3) | BIT(2)) -#define BMP280_FILTER_16X BIT(4) +#define BMP280_FILTER_2X 1 +#define BMP280_FILTER_4X 2 +#define BMP280_FILTER_8X 3 +#define BMP280_FILTER_16X 4 -#define BMP280_OSRS_HUMIDITY_MASK (BIT(2) | BIT(1) | BIT(0)) -#define BMP280_OSRS_HUMIDITIY_X(osrs_h) ((osrs_h) << 0) +#define BMP280_OSRS_HUMIDITY_MASK GENMASK(2, 0) #define BMP280_OSRS_HUMIDITY_SKIP 0 -#define BMP280_OSRS_HUMIDITY_1X BMP280_OSRS_HUMIDITIY_X(1) -#define BMP280_OSRS_HUMIDITY_2X BMP280_OSRS_HUMIDITIY_X(2) -#define BMP280_OSRS_HUMIDITY_4X BMP280_OSRS_HUMIDITIY_X(3) -#define BMP280_OSRS_HUMIDITY_8X BMP280_OSRS_HUMIDITIY_X(4) -#define BMP280_OSRS_HUMIDITY_16X BMP280_OSRS_HUMIDITIY_X(5) +#define BMP280_OSRS_HUMIDITY_1X 1 +#define BMP280_OSRS_HUMIDITY_2X 2 +#define BMP280_OSRS_HUMIDITY_4X 3 +#define BMP280_OSRS_HUMIDITY_8X 4 +#define BMP280_OSRS_HUMIDITY_16X 5 -#define BMP280_OSRS_TEMP_MASK (BIT(7) | BIT(6) | BIT(5)) +#define BMP280_OSRS_TEMP_MASK GENMASK(7, 5) #define BMP280_OSRS_TEMP_SKIP 0 -#define BMP280_OSRS_TEMP_X(osrs_t) ((osrs_t) << 5) -#define BMP280_OSRS_TEMP_1X BMP280_OSRS_TEMP_X(1) -#define BMP280_OSRS_TEMP_2X BMP280_OSRS_TEMP_X(2) -#define BMP280_OSRS_TEMP_4X BMP280_OSRS_TEMP_X(3) -#define BMP280_OSRS_TEMP_8X BMP280_OSRS_TEMP_X(4) -#define BMP280_OSRS_TEMP_16X BMP280_OSRS_TEMP_X(5) - -#define BMP280_OSRS_PRESS_MASK (BIT(4) | BIT(3) | BIT(2)) +#define BMP280_OSRS_TEMP_1X 1 +#define BMP280_OSRS_TEMP_2X 2 +#define BMP280_OSRS_TEMP_4X 3 +#define BMP280_OSRS_TEMP_8X 4 +#define BMP280_OSRS_TEMP_16X 5 + +#define BMP280_OSRS_PRESS_MASK GENMASK(4, 2) #define BMP280_OSRS_PRESS_SKIP 0 -#define BMP280_OSRS_PRESS_X(osrs_p) ((osrs_p) << 2) -#define BMP280_OSRS_PRESS_1X BMP280_OSRS_PRESS_X(1) -#define BMP280_OSRS_PRESS_2X BMP280_OSRS_PRESS_X(2) -#define BMP280_OSRS_PRESS_4X BMP280_OSRS_PRESS_X(3) -#define BMP280_OSRS_PRESS_8X BMP280_OSRS_PRESS_X(4) -#define BMP280_OSRS_PRESS_16X BMP280_OSRS_PRESS_X(5) - -#define BMP280_MODE_MASK (BIT(1) | BIT(0)) +#define BMP280_OSRS_PRESS_1X 1 +#define BMP280_OSRS_PRESS_2X 2 +#define BMP280_OSRS_PRESS_4X 3 +#define BMP280_OSRS_PRESS_8X 4 +#define BMP280_OSRS_PRESS_16X 5 + +#define BMP280_MODE_MASK GENMASK(1, 0) #define BMP280_MODE_SLEEP 0 -#define BMP280_MODE_FORCED BIT(0) -#define BMP280_MODE_NORMAL (BIT(1) | BIT(0)) +#define BMP280_MODE_FORCED 1 +#define BMP280_MODE_NORMAL 3 /* BMP180 specific registers */ #define BMP180_REG_OUT_XLSB 0xF8 @@ -79,19 +165,22 @@ #define BMP180_REG_CALIB_START 0xAA #define BMP180_REG_CALIB_COUNT 22 +#define BMP180_MEAS_CTRL_MASK GENMASK(4, 0) +#define BMP180_MEAS_TEMP 0x0E +#define BMP180_MEAS_PRESS 0x14 #define BMP180_MEAS_SCO BIT(5) -#define BMP180_MEAS_TEMP (0x0E | BMP180_MEAS_SCO) -#define BMP180_MEAS_PRESS_X(oss) ((oss) << 6 | 0x14 | BMP180_MEAS_SCO) -#define BMP180_MEAS_PRESS_1X BMP180_MEAS_PRESS_X(0) -#define BMP180_MEAS_PRESS_2X BMP180_MEAS_PRESS_X(1) -#define BMP180_MEAS_PRESS_4X BMP180_MEAS_PRESS_X(2) -#define BMP180_MEAS_PRESS_8X BMP180_MEAS_PRESS_X(3) +#define BMP180_OSRS_PRESS_MASK GENMASK(7, 6) +#define BMP180_MEAS_PRESS_1X 0 +#define BMP180_MEAS_PRESS_2X 1 +#define BMP180_MEAS_PRESS_4X 2 +#define BMP180_MEAS_PRESS_8X 3 /* BMP180 and BMP280 common registers */ #define BMP280_REG_CTRL_MEAS 0xF4 #define BMP280_REG_RESET 0xE0 #define BMP280_REG_ID 0xD0 +#define BMP380_CHIP_ID 0x50 #define BMP180_CHIP_ID 0x55 #define BMP280_CHIP_ID 0x58 #define BME280_CHIP_ID 0x60 @@ -105,6 +194,7 @@ /* Regmap configurations */ extern const struct regmap_config bmp180_regmap_config; extern const struct regmap_config bmp280_regmap_config; +extern const struct regmap_config bmp380_regmap_config; /* Probe called from different transports */ int bmp280_common_probe(struct device *dev, diff --git a/drivers/iio/pressure/dlhl60d.c b/drivers/iio/pressure/dlhl60d.c index 5f6bb3603a8b..f0b0d198c6d4 100644 --- a/drivers/iio/pressure/dlhl60d.c +++ b/drivers/iio/pressure/dlhl60d.c @@ -129,9 +129,8 @@ static int dlh_read_direct(struct dlh_state *st, if (ret) return ret; - *pressure = get_unaligned_be32(&st->rx_buf[1]) >> 8; - *temperature = get_unaligned_be32(&st->rx_buf[3]) & - GENMASK(DLH_NUM_TEMP_BITS - 1, 0); + *pressure = get_unaligned_be24(&st->rx_buf[1]); + *temperature = get_unaligned_be24(&st->rx_buf[4]); return 0; } diff --git a/drivers/iio/pressure/dps310.c b/drivers/iio/pressure/dps310.c index 36fb7ae0d0a9..984a3f511a1a 100644 --- a/drivers/iio/pressure/dps310.c +++ b/drivers/iio/pressure/dps310.c @@ -89,6 +89,7 @@ struct dps310_data { s32 c00, c10, c20, c30, c01, c11, c21; s32 pressure_raw; s32 temp_raw; + bool timeout_recovery_failed; }; static const struct iio_chan_spec dps310_channels[] = { @@ -159,6 +160,102 @@ static int dps310_get_coefs(struct dps310_data *data) return 0; } +/* + * Some versions of the chip will read temperatures in the ~60C range when + * it's actually ~20C. This is the manufacturer recommended workaround + * to correct the issue. The registers used below are undocumented. + */ +static int dps310_temp_workaround(struct dps310_data *data) +{ + int rc; + int reg; + + rc = regmap_read(data->regmap, 0x32, ®); + if (rc) + return rc; + + /* + * If bit 1 is set then the device is okay, and the workaround does not + * need to be applied + */ + if (reg & BIT(1)) + return 0; + + rc = regmap_write(data->regmap, 0x0e, 0xA5); + if (rc) + return rc; + + rc = regmap_write(data->regmap, 0x0f, 0x96); + if (rc) + return rc; + + rc = regmap_write(data->regmap, 0x62, 0x02); + if (rc) + return rc; + + rc = regmap_write(data->regmap, 0x0e, 0x00); + if (rc) + return rc; + + return regmap_write(data->regmap, 0x0f, 0x00); +} + +static int dps310_startup(struct dps310_data *data) +{ + int rc; + int ready; + + /* + * Set up pressure sensor in single sample, one measurement per second + * mode + */ + rc = regmap_write(data->regmap, DPS310_PRS_CFG, 0); + if (rc) + return rc; + + /* + * Set up external (MEMS) temperature sensor in single sample, one + * measurement per second mode + */ + rc = regmap_write(data->regmap, DPS310_TMP_CFG, DPS310_TMP_EXT); + if (rc) + return rc; + + /* Temp and pressure shifts are disabled when PRC <= 8 */ + rc = regmap_write_bits(data->regmap, DPS310_CFG_REG, + DPS310_PRS_SHIFT_EN | DPS310_TMP_SHIFT_EN, 0); + if (rc) + return rc; + + /* MEAS_CFG doesn't update correctly unless first written with 0 */ + rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG, + DPS310_MEAS_CTRL_BITS, 0); + if (rc) + return rc; + + /* Turn on temperature and pressure measurement in the background */ + rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG, + DPS310_MEAS_CTRL_BITS, DPS310_PRS_EN | + DPS310_TEMP_EN | DPS310_BACKGROUND); + if (rc) + return rc; + + /* + * Calibration coefficients required for reporting temperature. + * They are available 40ms after the device has started + */ + rc = regmap_read_poll_timeout(data->regmap, DPS310_MEAS_CFG, ready, + ready & DPS310_COEF_RDY, 10000, 40000); + if (rc) + return rc; + + rc = dps310_get_coefs(data); + if (rc) + return rc; + + return dps310_temp_workaround(data); +} + static int dps310_get_pres_precision(struct dps310_data *data) { int rc; @@ -297,11 +394,69 @@ static int dps310_get_temp_k(struct dps310_data *data) return scale_factors[ilog2(rc)]; } +static int dps310_reset_wait(struct dps310_data *data) +{ + int rc; + + rc = regmap_write(data->regmap, DPS310_RESET, DPS310_RESET_MAGIC); + if (rc) + return rc; + + /* Wait for device chip access: 2.5ms in specification */ + usleep_range(2500, 12000); + return 0; +} + +static int dps310_reset_reinit(struct dps310_data *data) +{ + int rc; + + rc = dps310_reset_wait(data); + if (rc) + return rc; + + return dps310_startup(data); +} + +static int dps310_ready_status(struct dps310_data *data, int ready_bit, int timeout) +{ + int sleep = DPS310_POLL_SLEEP_US(timeout); + int ready; + + return regmap_read_poll_timeout(data->regmap, DPS310_MEAS_CFG, ready, ready & ready_bit, + sleep, timeout); +} + +static int dps310_ready(struct dps310_data *data, int ready_bit, int timeout) +{ + int rc; + + rc = dps310_ready_status(data, ready_bit, timeout); + if (rc) { + if (rc == -ETIMEDOUT && !data->timeout_recovery_failed) { + /* Reset and reinitialize the chip. */ + if (dps310_reset_reinit(data)) { + data->timeout_recovery_failed = true; + } else { + /* Try again to get sensor ready status. */ + if (dps310_ready_status(data, ready_bit, timeout)) + data->timeout_recovery_failed = true; + else + return 0; + } + } + + return rc; + } + + data->timeout_recovery_failed = false; + return 0; +} + static int dps310_read_pres_raw(struct dps310_data *data) { int rc; int rate; - int ready; int timeout; s32 raw; u8 val[3]; @@ -313,9 +468,7 @@ static int dps310_read_pres_raw(struct dps310_data *data) timeout = DPS310_POLL_TIMEOUT_US(rate); /* Poll for sensor readiness; base the timeout upon the sample rate. */ - rc = regmap_read_poll_timeout(data->regmap, DPS310_MEAS_CFG, ready, - ready & DPS310_PRS_RDY, - DPS310_POLL_SLEEP_US(timeout), timeout); + rc = dps310_ready(data, DPS310_PRS_RDY, timeout); if (rc) goto done; @@ -352,7 +505,6 @@ static int dps310_read_temp_raw(struct dps310_data *data) { int rc; int rate; - int ready; int timeout; if (mutex_lock_interruptible(&data->lock)) @@ -362,10 +514,8 @@ static int dps310_read_temp_raw(struct dps310_data *data) timeout = DPS310_POLL_TIMEOUT_US(rate); /* Poll for sensor readiness; base the timeout upon the sample rate. */ - rc = regmap_read_poll_timeout(data->regmap, DPS310_MEAS_CFG, ready, - ready & DPS310_TMP_RDY, - DPS310_POLL_SLEEP_US(timeout), timeout); - if (rc < 0) + rc = dps310_ready(data, DPS310_TMP_RDY, timeout); + if (rc) goto done; rc = dps310_read_temp_ready(data); @@ -660,7 +810,7 @@ static void dps310_reset(void *action_data) { struct dps310_data *data = action_data; - regmap_write(data->regmap, DPS310_RESET, DPS310_RESET_MAGIC); + dps310_reset_wait(data); } static const struct regmap_config dps310_regmap_config = { @@ -677,52 +827,12 @@ static const struct iio_info dps310_info = { .write_raw = dps310_write_raw, }; -/* - * Some verions of chip will read temperatures in the ~60C range when - * its actually ~20C. This is the manufacturer recommended workaround - * to correct the issue. The registers used below are undocumented. - */ -static int dps310_temp_workaround(struct dps310_data *data) -{ - int rc; - int reg; - - rc = regmap_read(data->regmap, 0x32, ®); - if (rc < 0) - return rc; - - /* - * If bit 1 is set then the device is okay, and the workaround does not - * need to be applied - */ - if (reg & BIT(1)) - return 0; - - rc = regmap_write(data->regmap, 0x0e, 0xA5); - if (rc < 0) - return rc; - - rc = regmap_write(data->regmap, 0x0f, 0x96); - if (rc < 0) - return rc; - - rc = regmap_write(data->regmap, 0x62, 0x02); - if (rc < 0) - return rc; - - rc = regmap_write(data->regmap, 0x0e, 0x00); - if (rc < 0) - return rc; - - return regmap_write(data->regmap, 0x0f, 0x00); -} - static int dps310_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct dps310_data *data; struct iio_dev *iio; - int rc, ready; + int rc; iio = devm_iio_device_alloc(&client->dev, sizeof(*data)); if (!iio) @@ -747,54 +857,8 @@ static int dps310_probe(struct i2c_client *client, if (rc) return rc; - /* - * Set up pressure sensor in single sample, one measurement per second - * mode - */ - rc = regmap_write(data->regmap, DPS310_PRS_CFG, 0); - - /* - * Set up external (MEMS) temperature sensor in single sample, one - * measurement per second mode - */ - rc = regmap_write(data->regmap, DPS310_TMP_CFG, DPS310_TMP_EXT); - if (rc < 0) - return rc; - - /* Temp and pressure shifts are disabled when PRC <= 8 */ - rc = regmap_write_bits(data->regmap, DPS310_CFG_REG, - DPS310_PRS_SHIFT_EN | DPS310_TMP_SHIFT_EN, 0); - if (rc < 0) - return rc; - - /* MEAS_CFG doesn't update correctly unless first written with 0 */ - rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG, - DPS310_MEAS_CTRL_BITS, 0); - if (rc < 0) - return rc; - - /* Turn on temperature and pressure measurement in the background */ - rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG, - DPS310_MEAS_CTRL_BITS, DPS310_PRS_EN | - DPS310_TEMP_EN | DPS310_BACKGROUND); - if (rc < 0) - return rc; - - /* - * Calibration coefficients required for reporting temperature. - * They are available 40ms after the device has started - */ - rc = regmap_read_poll_timeout(data->regmap, DPS310_MEAS_CFG, ready, - ready & DPS310_COEF_RDY, 10000, 40000); - if (rc < 0) - return rc; - - rc = dps310_get_coefs(data); - if (rc < 0) - return rc; - - rc = dps310_temp_workaround(data); - if (rc < 0) + rc = dps310_startup(data); + if (rc) return rc; rc = devm_iio_device_register(&client->dev, iio); diff --git a/drivers/iio/pressure/icp10100.c b/drivers/iio/pressure/icp10100.c index af4621eaa6b5..b62f28585db5 100644 --- a/drivers/iio/pressure/icp10100.c +++ b/drivers/iio/pressure/icp10100.c @@ -595,7 +595,7 @@ static int icp10100_probe(struct i2c_client *client, return devm_iio_device_register(&client->dev, indio_dev); } -static int __maybe_unused icp10100_suspend(struct device *dev) +static int icp10100_suspend(struct device *dev) { struct icp10100_state *st = iio_priv(dev_get_drvdata(dev)); int ret; @@ -607,7 +607,7 @@ static int __maybe_unused icp10100_suspend(struct device *dev) return ret; } -static int __maybe_unused icp10100_resume(struct device *dev) +static int icp10100_resume(struct device *dev) { struct icp10100_state *st = iio_priv(dev_get_drvdata(dev)); int ret; @@ -626,8 +626,8 @@ out_unlock: return ret; } -static UNIVERSAL_DEV_PM_OPS(icp10100_pm, icp10100_suspend, icp10100_resume, - NULL); +static DEFINE_RUNTIME_DEV_PM_OPS(icp10100_pm, icp10100_suspend, icp10100_resume, + NULL); static const struct of_device_id icp10100_of_match[] = { { @@ -646,7 +646,7 @@ MODULE_DEVICE_TABLE(i2c, icp10100_id); static struct i2c_driver icp10100_driver = { .driver = { .name = "icp10100", - .pm = &icp10100_pm, + .pm = pm_ptr(&icp10100_pm), .of_match_table = icp10100_of_match, }, .probe = icp10100_probe, diff --git a/drivers/iio/pressure/st_pressure.h b/drivers/iio/pressure/st_pressure.h index 156e6a72dc5c..6e11bea784fa 100644 --- a/drivers/iio/pressure/st_pressure.h +++ b/drivers/iio/pressure/st_pressure.h @@ -22,6 +22,7 @@ enum st_press_type { LPS33HW, LPS35HW, LPS22HH, + LPS22DF, ST_PRESS_MAX, }; @@ -32,6 +33,7 @@ enum st_press_type { #define LPS33HW_PRESS_DEV_NAME "lps33hw" #define LPS35HW_PRESS_DEV_NAME "lps35hw" #define LPS22HH_PRESS_DEV_NAME "lps22hh" +#define LPS22DF_PRESS_DEV_NAME "lps22df" /** * struct st_sensors_platform_data - default press platform data diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c index 76913a2028d2..80176e3083af 100644 --- a/drivers/iio/pressure/st_pressure_core.c +++ b/drivers/iio/pressure/st_pressure_core.c @@ -552,6 +552,76 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .multi_read_bit = false, .bootime = 2, }, + { + /* + * CUSTOM VALUES FOR LPS22DF SENSOR + * See LPS22DF datasheet: + * http://www.st.com/resource/en/datasheet/lps22df.pdf + */ + .wai = 0xb4, + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, + .sensors_supported = { + [0] = LPS22DF_PRESS_DEV_NAME, + }, + .ch = (struct iio_chan_spec *)st_press_lps22hb_channels, + .num_ch = ARRAY_SIZE(st_press_lps22hb_channels), + .odr = { + .addr = 0x10, + .mask = 0x78, + .odr_avl = { + { .hz = 1, .value = 0x01 }, + { .hz = 4, .value = 0x02 }, + { .hz = 10, .value = 0x03 }, + { .hz = 25, .value = 0x04 }, + { .hz = 50, .value = 0x05 }, + { .hz = 75, .value = 0x06 }, + { .hz = 100, .value = 0x07 }, + { .hz = 200, .value = 0x08 }, + }, + }, + .pw = { + .addr = 0x10, + .mask = 0x78, + .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, + }, + .fs = { + .fs_avl = { + /* + * Pressure and temperature sensitivity values + * as defined in table 2 of LPS22DF datasheet. + */ + [0] = { + .num = ST_PRESS_FS_AVL_1260MB, + .gain = ST_PRESS_KPASCAL_NANO_SCALE, + .gain2 = ST_PRESS_LPS22HB_LSB_PER_CELSIUS, + }, + }, + }, + .bdu = { + .addr = 0x11, + .mask = BIT(3), + }, + .drdy_irq = { + .int1 = { + .addr = 0x13, + .mask = BIT(5), + .addr_od = 0x12, + .mask_od = BIT(1), + }, + .addr_ihl = 0x12, + .mask_ihl = BIT(3), + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x03, + }, + }, + .sim = { + .addr = 0x0E, + .value = BIT(5), + }, + .multi_read_bit = false, + .bootime = 2, + }, }; static int st_press_write_raw(struct iio_dev *indio_dev, diff --git a/drivers/iio/pressure/st_pressure_i2c.c b/drivers/iio/pressure/st_pressure_i2c.c index 7035777fd988..58fede861891 100644 --- a/drivers/iio/pressure/st_pressure_i2c.c +++ b/drivers/iio/pressure/st_pressure_i2c.c @@ -47,6 +47,10 @@ static const struct of_device_id st_press_of_match[] = { .compatible = "st,lps22hh", .data = LPS22HH_PRESS_DEV_NAME, }, + { + .compatible = "st,lps22df", + .data = LPS22DF_PRESS_DEV_NAME, + }, {}, }; MODULE_DEVICE_TABLE(of, st_press_of_match); @@ -67,6 +71,7 @@ static const struct i2c_device_id st_press_id_table[] = { { LPS33HW_PRESS_DEV_NAME, LPS33HW }, { LPS35HW_PRESS_DEV_NAME, LPS35HW }, { LPS22HH_PRESS_DEV_NAME, LPS22HH }, + { LPS22DF_PRESS_DEV_NAME, LPS22DF }, {}, }; MODULE_DEVICE_TABLE(i2c, st_press_id_table); diff --git a/drivers/iio/pressure/st_pressure_spi.c b/drivers/iio/pressure/st_pressure_spi.c index bfab8e7fb061..25cca5ad7c55 100644 --- a/drivers/iio/pressure/st_pressure_spi.c +++ b/drivers/iio/pressure/st_pressure_spi.c @@ -51,6 +51,10 @@ static const struct of_device_id st_press_of_match[] = { .compatible = "st,lps22hh", .data = LPS22HH_PRESS_DEV_NAME, }, + { + .compatible = "st,lps22df", + .data = LPS22DF_PRESS_DEV_NAME, + }, {}, }; MODULE_DEVICE_TABLE(of, st_press_of_match); @@ -97,6 +101,7 @@ static const struct spi_device_id st_press_id_table[] = { { LPS33HW_PRESS_DEV_NAME }, { LPS35HW_PRESS_DEV_NAME }, { LPS22HH_PRESS_DEV_NAME }, + { LPS22DF_PRESS_DEV_NAME }, { "lps001wp-press" }, { "lps25h-press", }, { "lps331ap-press" }, diff --git a/drivers/iio/proximity/srf04.c b/drivers/iio/proximity/srf04.c index 05015351a34a..faf2f806ce80 100644 --- a/drivers/iio/proximity/srf04.c +++ b/drivers/iio/proximity/srf04.c @@ -359,7 +359,7 @@ static int srf04_remove(struct platform_device *pdev) return 0; } -static int __maybe_unused srf04_pm_runtime_suspend(struct device *dev) +static int srf04_pm_runtime_suspend(struct device *dev) { struct platform_device *pdev = container_of(dev, struct platform_device, dev); @@ -371,7 +371,7 @@ static int __maybe_unused srf04_pm_runtime_suspend(struct device *dev) return 0; } -static int __maybe_unused srf04_pm_runtime_resume(struct device *dev) +static int srf04_pm_runtime_resume(struct device *dev) { struct platform_device *pdev = container_of(dev, struct platform_device, dev); @@ -385,8 +385,8 @@ static int __maybe_unused srf04_pm_runtime_resume(struct device *dev) } static const struct dev_pm_ops srf04_pm_ops = { - SET_RUNTIME_PM_OPS(srf04_pm_runtime_suspend, - srf04_pm_runtime_resume, NULL) + RUNTIME_PM_OPS(srf04_pm_runtime_suspend, + srf04_pm_runtime_resume, NULL) }; static struct platform_driver srf04_driver = { @@ -395,7 +395,7 @@ static struct platform_driver srf04_driver = { .driver = { .name = "srf04-gpio", .of_match_table = of_srf04_match, - .pm = &srf04_pm_ops, + .pm = pm_ptr(&srf04_pm_ops), }, }; diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c index ea7318b508ea..0e4747ccd3cf 100644 --- a/drivers/iio/proximity/sx9310.c +++ b/drivers/iio/proximity/sx9310.c @@ -965,7 +965,7 @@ static int sx9310_probe(struct i2c_client *client) return sx_common_probe(client, &sx9310_chip_info, &sx9310_regmap_config); } -static int __maybe_unused sx9310_suspend(struct device *dev) +static int sx9310_suspend(struct device *dev) { struct sx_common_data *data = iio_priv(dev_get_drvdata(dev)); u8 ctrl0; @@ -991,7 +991,7 @@ out: return ret; } -static int __maybe_unused sx9310_resume(struct device *dev) +static int sx9310_resume(struct device *dev) { struct sx_common_data *data = iio_priv(dev_get_drvdata(dev)); int ret; @@ -1013,7 +1013,7 @@ out: return 0; } -static SIMPLE_DEV_PM_OPS(sx9310_pm_ops, sx9310_suspend, sx9310_resume); +static DEFINE_SIMPLE_DEV_PM_OPS(sx9310_pm_ops, sx9310_suspend, sx9310_resume); static const struct acpi_device_id sx9310_acpi_match[] = { { "STH9310", SX9310_WHOAMI_VALUE }, @@ -1041,7 +1041,7 @@ static struct i2c_driver sx9310_driver = { .name = "sx9310", .acpi_match_table = sx9310_acpi_match, .of_match_table = sx9310_of_match, - .pm = &sx9310_pm_ops, + .pm = pm_sleep_ptr(&sx9310_pm_ops), /* * Lots of i2c transfers in probe + over 200 ms waiting in diff --git a/drivers/iio/proximity/sx9324.c b/drivers/iio/proximity/sx9324.c index edb5a2ce4e27..977cf17cec52 100644 --- a/drivers/iio/proximity/sx9324.c +++ b/drivers/iio/proximity/sx9324.c @@ -1073,7 +1073,7 @@ static int sx9324_probe(struct i2c_client *client) return sx_common_probe(client, &sx9324_chip_info, &sx9324_regmap_config); } -static int __maybe_unused sx9324_suspend(struct device *dev) +static int sx9324_suspend(struct device *dev) { struct sx_common_data *data = iio_priv(dev_get_drvdata(dev)); unsigned int regval; @@ -1098,7 +1098,7 @@ out: return ret; } -static int __maybe_unused sx9324_resume(struct device *dev) +static int sx9324_resume(struct device *dev) { struct sx_common_data *data = iio_priv(dev_get_drvdata(dev)); int ret; @@ -1114,7 +1114,7 @@ static int __maybe_unused sx9324_resume(struct device *dev) return 0; } -static SIMPLE_DEV_PM_OPS(sx9324_pm_ops, sx9324_suspend, sx9324_resume); +static DEFINE_SIMPLE_DEV_PM_OPS(sx9324_pm_ops, sx9324_suspend, sx9324_resume); static const struct acpi_device_id sx9324_acpi_match[] = { { "STH9324", SX9324_WHOAMI_VALUE }, @@ -1139,7 +1139,7 @@ static struct i2c_driver sx9324_driver = { .name = "sx9324", .acpi_match_table = sx9324_acpi_match, .of_match_table = sx9324_of_match, - .pm = &sx9324_pm_ops, + .pm = pm_sleep_ptr(&sx9324_pm_ops), /* * Lots of i2c transfers in probe + over 200 ms waiting in diff --git a/drivers/iio/proximity/sx9360.c b/drivers/iio/proximity/sx9360.c index d9a12e6be6ca..7fa2213d23ba 100644 --- a/drivers/iio/proximity/sx9360.c +++ b/drivers/iio/proximity/sx9360.c @@ -819,7 +819,7 @@ static int sx9360_probe(struct i2c_client *client) return sx_common_probe(client, &sx9360_chip_info, &sx9360_regmap_config); } -static int __maybe_unused sx9360_suspend(struct device *dev) +static int sx9360_suspend(struct device *dev) { struct sx_common_data *data = iio_priv(dev_get_drvdata(dev)); unsigned int regval; @@ -844,7 +844,7 @@ out: return ret; } -static int __maybe_unused sx9360_resume(struct device *dev) +static int sx9360_resume(struct device *dev) { struct sx_common_data *data = iio_priv(dev_get_drvdata(dev)); int ret; @@ -861,7 +861,7 @@ static int __maybe_unused sx9360_resume(struct device *dev) return 0; } -static SIMPLE_DEV_PM_OPS(sx9360_pm_ops, sx9360_suspend, sx9360_resume); +static DEFINE_SIMPLE_DEV_PM_OPS(sx9360_pm_ops, sx9360_suspend, sx9360_resume); static const struct acpi_device_id sx9360_acpi_match[] = { { "STH9360", SX9360_WHOAMI_VALUE }, @@ -886,7 +886,7 @@ static struct i2c_driver sx9360_driver = { .name = "sx9360", .acpi_match_table = sx9360_acpi_match, .of_match_table = sx9360_of_match, - .pm = &sx9360_pm_ops, + .pm = pm_sleep_ptr(&sx9360_pm_ops), /* * Lots of i2c transfers in probe + over 200 ms waiting in diff --git a/drivers/iio/temperature/mlx90614.c b/drivers/iio/temperature/mlx90614.c index 0808bb865928..8eb0f962ed25 100644 --- a/drivers/iio/temperature/mlx90614.c +++ b/drivers/iio/temperature/mlx90614.c @@ -79,16 +79,15 @@ struct mlx90614_data { /* Bandwidth values for IIR filtering */ static const int mlx90614_iir_values[] = {77, 31, 20, 15, 723, 153, 110, 86}; -static IIO_CONST_ATTR(in_temp_object_filter_low_pass_3db_frequency_available, - "0.15 0.20 0.31 0.77 0.86 1.10 1.53 7.23"); - -static struct attribute *mlx90614_attributes[] = { - &iio_const_attr_in_temp_object_filter_low_pass_3db_frequency_available.dev_attr.attr, - NULL, -}; - -static const struct attribute_group mlx90614_attr_group = { - .attrs = mlx90614_attributes, +static const int mlx90614_freqs[][2] = { + {0, 150000}, + {0, 200000}, + {0, 310000}, + {0, 770000}, + {0, 860000}, + {1, 100000}, + {1, 530000}, + {7, 230000} }; /* @@ -373,6 +372,22 @@ static int mlx90614_write_raw_get_fmt(struct iio_dev *indio_dev, } } +static int mlx90614_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: + *vals = (int *)mlx90614_freqs; + *type = IIO_VAL_INT_PLUS_MICRO; + *length = 2 * ARRAY_SIZE(mlx90614_freqs); + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } +} + static const struct iio_chan_spec mlx90614_channels[] = { { .type = IIO_TEMP, @@ -389,6 +404,8 @@ static const struct iio_chan_spec mlx90614_channels[] = { .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_CALIBEMISSIVITY) | BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), + .info_mask_separate_available = + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE), }, @@ -401,6 +418,8 @@ static const struct iio_chan_spec mlx90614_channels[] = { .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_CALIBEMISSIVITY) | BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), + .info_mask_separate_available = + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE), }, @@ -410,7 +429,7 @@ static const struct iio_info mlx90614_info = { .read_raw = mlx90614_read_raw, .write_raw = mlx90614_write_raw, .write_raw_get_fmt = mlx90614_write_raw_get_fmt, - .attrs = &mlx90614_attr_group, + .read_avail = mlx90614_read_avail, }; #ifdef CONFIG_PM diff --git a/drivers/iio/temperature/mlx90632.c b/drivers/iio/temperature/mlx90632.c index e8ef47147e2b..f6dec0e5f097 100644 --- a/drivers/iio/temperature/mlx90632.c +++ b/drivers/iio/temperature/mlx90632.c @@ -18,6 +18,7 @@ #include <linux/math64.h> #include <linux/pm_runtime.h> #include <linux/regmap.h> +#include <linux/regulator/consumer.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> @@ -128,6 +129,7 @@ * calculations * @object_ambient_temperature: Ambient temperature at object (might differ of * the ambient temperature of sensor. + * @regulator: Regulator of the device */ struct mlx90632_data { struct i2c_client *client; @@ -136,6 +138,7 @@ struct mlx90632_data { u16 emissivity; u8 mtyp; u32 object_ambient_temperature; + struct regulator *regulator; }; static const struct regmap_range mlx90632_volatile_reg_range[] = { @@ -208,6 +211,15 @@ static s32 mlx90632_pwr_continuous(struct regmap *regmap) } /** + * mlx90632_reset_delay() - Give the mlx90632 some time to reset properly + * If this is not done, the following I2C command(s) will not be accepted. + */ +static void mlx90632_reset_delay(void) +{ + usleep_range(150, 200); +} + +/** * mlx90632_perform_measurement() - Trigger and retrieve current measurement cycle * @data: pointer to mlx90632_data object containing regmap information * @@ -248,11 +260,7 @@ static int mlx90632_set_meas_type(struct regmap *regmap, u8 type) if (ret < 0) return ret; - /* - * Give the mlx90632 some time to reset properly before sending a new I2C command - * if this is not done, the following I2C command(s) will not be accepted. - */ - usleep_range(150, 200); + mlx90632_reset_delay(); ret = regmap_write_bits(regmap, MLX90632_REG_CONTROL, (MLX90632_CFG_MTYP_MASK | MLX90632_CFG_PWR_MASK), @@ -841,6 +849,32 @@ static int mlx90632_wakeup(struct mlx90632_data *data) return mlx90632_pwr_continuous(data->regmap); } +static void mlx90632_disable_regulator(void *_data) +{ + struct mlx90632_data *data = _data; + int ret; + + ret = regulator_disable(data->regulator); + if (ret < 0) + dev_err(regmap_get_device(data->regmap), + "Failed to disable power regulator: %d\n", ret); +} + +static int mlx90632_enable_regulator(struct mlx90632_data *data) +{ + int ret; + + ret = regulator_enable(data->regulator); + if (ret < 0) { + dev_err(regmap_get_device(data->regmap), "Failed to enable power regulator!\n"); + return ret; + } + + mlx90632_reset_delay(); + + return ret; +} + static int mlx90632_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -876,6 +910,23 @@ static int mlx90632_probe(struct i2c_client *client, indio_dev->channels = mlx90632_channels; indio_dev->num_channels = ARRAY_SIZE(mlx90632_channels); + mlx90632->regulator = devm_regulator_get(&client->dev, "vdd"); + if (IS_ERR(mlx90632->regulator)) + return dev_err_probe(&client->dev, PTR_ERR(mlx90632->regulator), + "failed to get vdd regulator"); + + ret = mlx90632_enable_regulator(mlx90632); + if (ret < 0) + return ret; + + ret = devm_add_action_or_reset(&client->dev, mlx90632_disable_regulator, + mlx90632); + if (ret < 0) { + dev_err(&client->dev, "Failed to setup regulator cleanup action %d\n", + ret); + return ret; + } + ret = mlx90632_wakeup(mlx90632); if (ret < 0) { dev_err(&client->dev, "Wakeup failed: %d\n", ret); diff --git a/drivers/iio/test/iio-test-rescale.c b/drivers/iio/test/iio-test-rescale.c index cc782ccff880..31ee55a6faed 100644 --- a/drivers/iio/test/iio-test-rescale.c +++ b/drivers/iio/test/iio-test-rescale.c @@ -29,7 +29,7 @@ struct rescale_tc_data { const char *expected_off; }; -const struct rescale_tc_data scale_cases[] = { +static const struct rescale_tc_data scale_cases[] = { /* * Typical use cases */ @@ -477,7 +477,7 @@ const struct rescale_tc_data scale_cases[] = { }, }; -const struct rescale_tc_data offset_cases[] = { +static const struct rescale_tc_data offset_cases[] = { /* * Typical use cases */ diff --git a/drivers/interconnect/core.c b/drivers/interconnect/core.c index 808f6e7a8048..25debded65a8 100644 --- a/drivers/interconnect/core.c +++ b/drivers/interconnect/core.c @@ -1057,29 +1057,25 @@ EXPORT_SYMBOL_GPL(icc_provider_add); /** * icc_provider_del() - delete previously added interconnect provider * @provider: the interconnect provider that will be removed from topology - * - * Return: 0 on success, or an error code otherwise */ -int icc_provider_del(struct icc_provider *provider) +void icc_provider_del(struct icc_provider *provider) { mutex_lock(&icc_lock); if (provider->users) { pr_warn("interconnect provider still has %d users\n", provider->users); mutex_unlock(&icc_lock); - return -EBUSY; + return; } if (!list_empty(&provider->nodes)) { pr_warn("interconnect provider still has nodes\n"); mutex_unlock(&icc_lock); - return -EBUSY; + return; } list_del(&provider->provider_list); mutex_unlock(&icc_lock); - - return 0; } EXPORT_SYMBOL_GPL(icc_provider_del); diff --git a/drivers/interconnect/imx/imx.c b/drivers/interconnect/imx/imx.c index 48ffd59953bf..823d9be9771a 100644 --- a/drivers/interconnect/imx/imx.c +++ b/drivers/interconnect/imx/imx.c @@ -324,13 +324,13 @@ provider_del: } EXPORT_SYMBOL_GPL(imx_icc_register); -int imx_icc_unregister(struct platform_device *pdev) +void imx_icc_unregister(struct platform_device *pdev) { struct imx_icc_provider *imx_provider = platform_get_drvdata(pdev); imx_icc_unregister_nodes(&imx_provider->provider); - return icc_provider_del(&imx_provider->provider); + icc_provider_del(&imx_provider->provider); } EXPORT_SYMBOL_GPL(imx_icc_unregister); diff --git a/drivers/interconnect/imx/imx.h b/drivers/interconnect/imx/imx.h index e0a2ee173ecd..895907cdcb3b 100644 --- a/drivers/interconnect/imx/imx.h +++ b/drivers/interconnect/imx/imx.h @@ -103,6 +103,6 @@ int imx_icc_register(struct platform_device *pdev, struct imx_icc_node_desc *nodes, int nodes_count, struct imx_icc_noc_setting *noc_settings); -int imx_icc_unregister(struct platform_device *pdev); +void imx_icc_unregister(struct platform_device *pdev); #endif /* __DRIVERS_INTERCONNECT_IMX_H */ diff --git a/drivers/interconnect/imx/imx8mm.c b/drivers/interconnect/imx/imx8mm.c index ae797412db96..b43325364aa3 100644 --- a/drivers/interconnect/imx/imx8mm.c +++ b/drivers/interconnect/imx/imx8mm.c @@ -88,7 +88,9 @@ static int imx8mm_icc_probe(struct platform_device *pdev) static int imx8mm_icc_remove(struct platform_device *pdev) { - return imx_icc_unregister(pdev); + imx_icc_unregister(pdev); + + return 0; } static struct platform_driver imx8mm_icc_driver = { diff --git a/drivers/interconnect/imx/imx8mn.c b/drivers/interconnect/imx/imx8mn.c index 1ce94c5bdd8c..8ce6d8e4bf5e 100644 --- a/drivers/interconnect/imx/imx8mn.c +++ b/drivers/interconnect/imx/imx8mn.c @@ -77,7 +77,9 @@ static int imx8mn_icc_probe(struct platform_device *pdev) static int imx8mn_icc_remove(struct platform_device *pdev) { - return imx_icc_unregister(pdev); + imx_icc_unregister(pdev); + + return 0; } static struct platform_driver imx8mn_icc_driver = { diff --git a/drivers/interconnect/imx/imx8mp.c b/drivers/interconnect/imx/imx8mp.c index 5f1c83ed157b..8bfaf173f1da 100644 --- a/drivers/interconnect/imx/imx8mp.c +++ b/drivers/interconnect/imx/imx8mp.c @@ -242,7 +242,9 @@ static int imx8mp_icc_probe(struct platform_device *pdev) static int imx8mp_icc_remove(struct platform_device *pdev) { - return imx_icc_unregister(pdev); + imx_icc_unregister(pdev); + + return 0; } static struct platform_driver imx8mp_icc_driver = { diff --git a/drivers/interconnect/imx/imx8mq.c b/drivers/interconnect/imx/imx8mq.c index 7f00a0511c6e..b6fb71305c99 100644 --- a/drivers/interconnect/imx/imx8mq.c +++ b/drivers/interconnect/imx/imx8mq.c @@ -87,7 +87,9 @@ static int imx8mq_icc_probe(struct platform_device *pdev) static int imx8mq_icc_remove(struct platform_device *pdev) { - return imx_icc_unregister(pdev); + imx_icc_unregister(pdev); + + return 0; } static struct platform_driver imx8mq_icc_driver = { diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig index 25d5b4baf6f6..1a1c941635a2 100644 --- a/drivers/interconnect/qcom/Kconfig +++ b/drivers/interconnect/qcom/Kconfig @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only config INTERCONNECT_QCOM - bool "Qualcomm Network-on-Chip interconnect drivers" + tristate "Qualcomm Network-on-Chip interconnect drivers" depends on ARCH_QCOM help Support for Qualcomm's Network-on-Chip interconnect hardware. diff --git a/drivers/interconnect/qcom/icc-common.c b/drivers/interconnect/qcom/icc-common.c index 0822ce207b5d..f27f4fdc4531 100644 --- a/drivers/interconnect/qcom/icc-common.c +++ b/drivers/interconnect/qcom/icc-common.c @@ -5,6 +5,7 @@ #include <linux/of.h> #include <linux/slab.h> +#include <linux/module.h> #include "icc-common.h" @@ -32,3 +33,5 @@ struct icc_node_data *qcom_icc_xlate_extended(struct of_phandle_args *spec, void return ndata; } EXPORT_SYMBOL_GPL(qcom_icc_xlate_extended); + +MODULE_LICENSE("GPL"); diff --git a/drivers/interconnect/qcom/icc-rpm.c b/drivers/interconnect/qcom/icc-rpm.c index 7f6a70e0256a..39e43b957599 100644 --- a/drivers/interconnect/qcom/icc-rpm.c +++ b/drivers/interconnect/qcom/icc-rpm.c @@ -563,6 +563,8 @@ int qnoc_remove(struct platform_device *pdev) icc_nodes_remove(&qp->provider); clk_bulk_disable_unprepare(qp->num_clks, qp->bus_clks); - return icc_provider_del(&qp->provider); + icc_provider_del(&qp->provider); + + return 0; } EXPORT_SYMBOL(qnoc_remove); diff --git a/drivers/interconnect/qcom/icc-rpmh.c b/drivers/interconnect/qcom/icc-rpmh.c index 114bb8f64573..fd17291c61eb 100644 --- a/drivers/interconnect/qcom/icc-rpmh.c +++ b/drivers/interconnect/qcom/icc-rpmh.c @@ -251,7 +251,9 @@ int qcom_icc_rpmh_remove(struct platform_device *pdev) struct qcom_icc_provider *qp = platform_get_drvdata(pdev); icc_nodes_remove(&qp->provider); - return icc_provider_del(&qp->provider); + icc_provider_del(&qp->provider); + + return 0; } EXPORT_SYMBOL_GPL(qcom_icc_rpmh_remove); diff --git a/drivers/interconnect/qcom/msm8974.c b/drivers/interconnect/qcom/msm8974.c index 6fa0ad90fc3d..5ea192f1141d 100644 --- a/drivers/interconnect/qcom/msm8974.c +++ b/drivers/interconnect/qcom/msm8974.c @@ -749,7 +749,9 @@ static int msm8974_icc_remove(struct platform_device *pdev) icc_nodes_remove(&qp->provider); clk_bulk_disable_unprepare(qp->num_clks, qp->bus_clks); - return icc_provider_del(&qp->provider); + icc_provider_del(&qp->provider); + + return 0; } static const struct of_device_id msm8974_noc_of_match[] = { diff --git a/drivers/interconnect/qcom/osm-l3.c b/drivers/interconnect/qcom/osm-l3.c index 4198656f4e59..ddbdf0943f94 100644 --- a/drivers/interconnect/qcom/osm-l3.c +++ b/drivers/interconnect/qcom/osm-l3.c @@ -217,7 +217,9 @@ static int qcom_osm_l3_remove(struct platform_device *pdev) struct qcom_osm_l3_icc_provider *qp = platform_get_drvdata(pdev); icc_nodes_remove(&qp->provider); - return icc_provider_del(&qp->provider); + icc_provider_del(&qp->provider); + + return 0; } static int qcom_osm_l3_probe(struct platform_device *pdev) diff --git a/drivers/interconnect/qcom/sm8450.c b/drivers/interconnect/qcom/sm8450.c index e821fd0b2f66..e3a12e3d6e06 100644 --- a/drivers/interconnect/qcom/sm8450.c +++ b/drivers/interconnect/qcom/sm8450.c @@ -1933,7 +1933,9 @@ static int qnoc_remove(struct platform_device *pdev) struct qcom_icc_provider *qp = platform_get_drvdata(pdev); icc_nodes_remove(&qp->provider); - return icc_provider_del(&qp->provider); + icc_provider_del(&qp->provider); + + return 0; } static const struct of_device_id qnoc_of_match[] = { diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c index d32b02336411..71f7edded9cf 100644 --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c @@ -2817,6 +2817,26 @@ static int arm_smmu_dev_disable_feature(struct device *dev, } } +/* + * HiSilicon PCIe tune and trace device can be used to trace TLP headers on the + * PCIe link and save the data to memory by DMA. The hardware is restricted to + * use identity mapping only. + */ +#define IS_HISI_PTT_DEVICE(pdev) ((pdev)->vendor == PCI_VENDOR_ID_HUAWEI && \ + (pdev)->device == 0xa12e) + +static int arm_smmu_def_domain_type(struct device *dev) +{ + if (dev_is_pci(dev)) { + struct pci_dev *pdev = to_pci_dev(dev); + + if (IS_HISI_PTT_DEVICE(pdev)) + return IOMMU_DOMAIN_IDENTITY; + } + + return 0; +} + static struct iommu_ops arm_smmu_ops = { .capable = arm_smmu_capable, .domain_alloc = arm_smmu_domain_alloc, @@ -2831,6 +2851,7 @@ static struct iommu_ops arm_smmu_ops = { .sva_unbind = arm_smmu_sva_unbind, .sva_get_pasid = arm_smmu_sva_get_pasid, .page_response = arm_smmu_page_response, + .def_domain_type = arm_smmu_def_domain_type, .pgsize_bitmap = -1UL, /* Restricted during device attach */ .owner = THIS_MODULE, .default_domain_ops = &(const struct iommu_domain_ops) { diff --git a/drivers/ipack/ipack.c b/drivers/ipack/ipack.c index b1c3198355e7..74d449858a61 100644 --- a/drivers/ipack/ipack.c +++ b/drivers/ipack/ipack.c @@ -429,8 +429,11 @@ int ipack_device_init(struct ipack_device *dev) dev->dev.bus = &ipack_bus_type; dev->dev.release = ipack_device_release; dev->dev.parent = dev->bus->parent; - dev_set_name(&dev->dev, + ret = dev_set_name(&dev->dev, "ipack-dev.%u.%u", dev->bus->bus_nr, dev->slot); + if (ret) + return ret; + device_initialize(&dev->dev); if (dev->bus->ops->set_clockrate(dev, 8)) diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 94e9fb4cdd76..358ad56f6524 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -513,4 +513,5 @@ source "drivers/misc/cardreader/Kconfig" source "drivers/misc/habanalabs/Kconfig" source "drivers/misc/uacce/Kconfig" source "drivers/misc/pvpanic/Kconfig" +source "drivers/misc/mchp_pci1xxxx/Kconfig" endmenu diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 2be8542616dd..ac9b3e757ba1 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -60,4 +60,5 @@ obj-$(CONFIG_XILINX_SDFEC) += xilinx_sdfec.o obj-$(CONFIG_HISI_HIKEY_USB) += hisi_hikey_usb.o obj-$(CONFIG_HI6421V600_IRQ) += hi6421v600-irq.o obj-$(CONFIG_OPEN_DICE) += open-dice.o -obj-$(CONFIG_VCPU_STALL_DETECTOR) += vcpu_stall_detector.o
\ No newline at end of file +obj-$(CONFIG_GP_PCI1XXXX) += mchp_pci1xxxx/ +obj-$(CONFIG_VCPU_STALL_DETECTOR) += vcpu_stall_detector.o diff --git a/drivers/misc/altera-stapl/altera.c b/drivers/misc/altera-stapl/altera.c index 075f3a36d512..a58b7cb81d98 100644 --- a/drivers/misc/altera-stapl/altera.c +++ b/drivers/misc/altera-stapl/altera.c @@ -1014,7 +1014,7 @@ exit_done: * ...argument 0 is string ID */ count = strlen(msg_buff); - strlcpy(&msg_buff[count], + strscpy(&msg_buff[count], &p[str_table + args[0]], ALTERA_MESSAGE_LENGTH - count); break; @@ -2146,7 +2146,7 @@ static int altera_get_note(u8 *p, s32 program_size, s32 *offset, &p[note_table + (8 * i) + 4])]; if (value != NULL) - strlcpy(value, value_ptr, vallen); + strscpy(value, value_ptr, vallen); } } @@ -2162,13 +2162,13 @@ static int altera_get_note(u8 *p, s32 program_size, s32 *offset, status = 0; if (key != NULL) - strlcpy(key, &p[note_strings + + strscpy(key, &p[note_strings + get_unaligned_be32( &p[note_table + (8 * i)])], keylen); if (value != NULL) - strlcpy(value, &p[note_strings + + strscpy(value, &p[note_strings + get_unaligned_be32( &p[note_table + (8 * i) + 4])], vallen); diff --git a/drivers/misc/bcm-vk/bcm_vk_dev.c b/drivers/misc/bcm-vk/bcm_vk_dev.c index a16b99bdaa13..d4a96137728d 100644 --- a/drivers/misc/bcm-vk/bcm_vk_dev.c +++ b/drivers/misc/bcm-vk/bcm_vk_dev.c @@ -1339,7 +1339,7 @@ static int bcm_vk_probe(struct pci_dev *pdev, const struct pci_device_id *ent) pci_set_drvdata(pdev, vk); irq = pci_alloc_irq_vectors(pdev, - 1, + VK_MSIX_IRQ_MIN_REQ, VK_MSIX_IRQ_MAX, PCI_IRQ_MSI | PCI_IRQ_MSIX); @@ -1401,7 +1401,7 @@ static int bcm_vk_probe(struct pci_dev *pdev, const struct pci_device_id *ent) bcm_vk_tty_set_irq_enabled(vk, i); } - id = ida_simple_get(&bcm_vk_ida, 0, 0, GFP_KERNEL); + id = ida_alloc(&bcm_vk_ida, GFP_KERNEL); if (id < 0) { err = id; dev_err(dev, "unable to get id\n"); @@ -1500,7 +1500,7 @@ err_kfree_name: misc_device->name = NULL; err_ida_remove: - ida_simple_remove(&bcm_vk_ida, id); + ida_free(&bcm_vk_ida, id); err_irq: for (i = 0; i < vk->num_irqs; i++) @@ -1573,7 +1573,7 @@ static void bcm_vk_remove(struct pci_dev *pdev) if (misc_device->name) { misc_deregister(misc_device); kfree(misc_device->name); - ida_simple_remove(&bcm_vk_ida, vk->devid); + ida_free(&bcm_vk_ida, vk->devid); } for (i = 0; i < vk->num_irqs; i++) devm_free_irq(&pdev->dev, pci_irq_vector(pdev, i), vk); diff --git a/drivers/misc/eeprom/eeprom.c b/drivers/misc/eeprom/eeprom.c index 4a9445fea93d..8a841a75d893 100644 --- a/drivers/misc/eeprom/eeprom.c +++ b/drivers/misc/eeprom/eeprom.c @@ -136,7 +136,7 @@ static int eeprom_detect(struct i2c_client *client, struct i2c_board_info *info) && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) return -ENODEV; - strlcpy(info->type, "eeprom", I2C_NAME_SIZE); + strscpy(info->type, "eeprom", I2C_NAME_SIZE); return 0; } diff --git a/drivers/misc/eeprom/idt_89hpesx.c b/drivers/misc/eeprom/idt_89hpesx.c index ada2a3af36d7..bb3ed352b95f 100644 --- a/drivers/misc/eeprom/idt_89hpesx.c +++ b/drivers/misc/eeprom/idt_89hpesx.c @@ -1075,7 +1075,7 @@ static const struct i2c_device_id *idt_ee_match_id(struct fwnode_handle *fwnode) return NULL; p = strchr(compatible, ','); - strlcpy(devname, p ? p + 1 : compatible, sizeof(devname)); + strscpy(devname, p ? p + 1 : compatible, sizeof(devname)); /* Search through the device name */ while (id->name[0]) { if (strcmp(devname, id->name) == 0) diff --git a/drivers/misc/fastrpc.c b/drivers/misc/fastrpc.c index 5d9e3483b89d..7ff0b63c25e3 100644 --- a/drivers/misc/fastrpc.c +++ b/drivers/misc/fastrpc.c @@ -1515,7 +1515,7 @@ static int fastrpc_get_info_from_dsp(struct fastrpc_user *fl, uint32_t *dsp_attr args[1].ptr = (u64)(uintptr_t)&dsp_attr_buf[1]; args[1].length = dsp_attr_buf_len; args[1].fd = -1; - fl->pd = 1; + fl->pd = USER_PD; return fastrpc_internal_invoke(fl, true, FASTRPC_DSP_UTILITIES_HANDLE, FASTRPC_SCALARS(0, 1, 1), args); diff --git a/drivers/misc/habanalabs/Kconfig b/drivers/misc/habanalabs/Kconfig index 861c81006c6d..bd01d0d940c0 100644 --- a/drivers/misc/habanalabs/Kconfig +++ b/drivers/misc/habanalabs/Kconfig @@ -10,6 +10,7 @@ config HABANA_AI select HWMON select DMA_SHARED_BUFFER select CRC32 + select FW_LOADER help Enables PCIe card driver for Habana's AI Processors (AIP) that are designed to accelerate Deep Learning inference and training workloads. diff --git a/drivers/misc/habanalabs/Makefile b/drivers/misc/habanalabs/Makefile index b35d7000c86b..a48a9e0969ed 100644 --- a/drivers/misc/habanalabs/Makefile +++ b/drivers/misc/habanalabs/Makefile @@ -8,13 +8,13 @@ obj-$(CONFIG_HABANA_AI) := habanalabs.o include $(src)/common/Makefile habanalabs-y += $(HL_COMMON_FILES) -include $(src)/goya/Makefile -habanalabs-y += $(HL_GOYA_FILES) +include $(src)/gaudi2/Makefile +habanalabs-y += $(HL_GAUDI2_FILES) include $(src)/gaudi/Makefile habanalabs-y += $(HL_GAUDI_FILES) -include $(src)/gaudi2/Makefile -habanalabs-y += $(HL_GAUDI2_FILES) +include $(src)/goya/Makefile +habanalabs-y += $(HL_GOYA_FILES) habanalabs-$(CONFIG_DEBUG_FS) += common/debugfs.o diff --git a/drivers/misc/habanalabs/common/command_buffer.c b/drivers/misc/habanalabs/common/command_buffer.c index b027f66f8bd4..2b332991ac6a 100644 --- a/drivers/misc/habanalabs/common/command_buffer.c +++ b/drivers/misc/habanalabs/common/command_buffer.c @@ -12,20 +12,18 @@ #include <linux/slab.h> #include <linux/uaccess.h> +#define CB_VA_POOL_SIZE (4UL * SZ_1G) + static int cb_map_mem(struct hl_ctx *ctx, struct hl_cb *cb) { struct hl_device *hdev = ctx->hdev; struct asic_fixed_properties *prop = &hdev->asic_prop; - struct hl_vm_va_block *va_block, *tmp; - dma_addr_t bus_addr; - u64 virt_addr; u32 page_size = prop->pmmu.page_size; - s32 offset; int rc; if (!hdev->supports_cb_mapping) { dev_err_ratelimited(hdev->dev, - "Cannot map CB because no VA range is allocated for CB mapping\n"); + "Mapping a CB to the device's MMU is not supported\n"); return -EINVAL; } @@ -35,106 +33,45 @@ static int cb_map_mem(struct hl_ctx *ctx, struct hl_cb *cb) return -EINVAL; } - INIT_LIST_HEAD(&cb->va_block_list); - - for (bus_addr = cb->bus_address; - bus_addr < cb->bus_address + cb->size; - bus_addr += page_size) { - - virt_addr = (u64) gen_pool_alloc(ctx->cb_va_pool, page_size); - if (!virt_addr) { - dev_err(hdev->dev, - "Failed to allocate device virtual address for CB\n"); - rc = -ENOMEM; - goto err_va_pool_free; - } + if (cb->is_mmu_mapped) + return 0; - va_block = kzalloc(sizeof(*va_block), GFP_KERNEL); - if (!va_block) { - rc = -ENOMEM; - gen_pool_free(ctx->cb_va_pool, virt_addr, page_size); - goto err_va_pool_free; - } + cb->roundup_size = roundup(cb->size, page_size); - va_block->start = virt_addr; - va_block->end = virt_addr + page_size - 1; - va_block->size = page_size; - list_add_tail(&va_block->node, &cb->va_block_list); + cb->virtual_addr = (u64) gen_pool_alloc(ctx->cb_va_pool, cb->roundup_size); + if (!cb->virtual_addr) { + dev_err(hdev->dev, "Failed to allocate device virtual address for CB\n"); + return -ENOMEM; } - mutex_lock(&ctx->mmu_lock); - - bus_addr = cb->bus_address; - offset = 0; - list_for_each_entry(va_block, &cb->va_block_list, node) { - rc = hl_mmu_map_page(ctx, va_block->start, bus_addr, - va_block->size, list_is_last(&va_block->node, - &cb->va_block_list)); - if (rc) { - dev_err(hdev->dev, "Failed to map VA %#llx to CB\n", - va_block->start); - goto err_va_umap; - } - - bus_addr += va_block->size; - offset += va_block->size; + mutex_lock(&hdev->mmu_lock); + rc = hl_mmu_map_contiguous(ctx, cb->virtual_addr, cb->bus_address, cb->roundup_size); + if (rc) { + dev_err(hdev->dev, "Failed to map VA %#llx to CB\n", cb->virtual_addr); + goto err_va_umap; } - rc = hl_mmu_invalidate_cache(hdev, false, MMU_OP_USERPTR | MMU_OP_SKIP_LOW_CACHE_INV); - - mutex_unlock(&ctx->mmu_lock); + mutex_unlock(&hdev->mmu_lock); cb->is_mmu_mapped = true; - return rc; err_va_umap: - list_for_each_entry(va_block, &cb->va_block_list, node) { - if (offset <= 0) - break; - hl_mmu_unmap_page(ctx, va_block->start, va_block->size, - offset <= va_block->size); - offset -= va_block->size; - } - - rc = hl_mmu_invalidate_cache(hdev, true, MMU_OP_USERPTR); - - mutex_unlock(&ctx->mmu_lock); - -err_va_pool_free: - list_for_each_entry_safe(va_block, tmp, &cb->va_block_list, node) { - gen_pool_free(ctx->cb_va_pool, va_block->start, va_block->size); - list_del(&va_block->node); - kfree(va_block); - } - + mutex_unlock(&hdev->mmu_lock); + gen_pool_free(ctx->cb_va_pool, cb->virtual_addr, cb->roundup_size); return rc; } static void cb_unmap_mem(struct hl_ctx *ctx, struct hl_cb *cb) { struct hl_device *hdev = ctx->hdev; - struct hl_vm_va_block *va_block, *tmp; - - mutex_lock(&ctx->mmu_lock); - - list_for_each_entry(va_block, &cb->va_block_list, node) - if (hl_mmu_unmap_page(ctx, va_block->start, va_block->size, - list_is_last(&va_block->node, - &cb->va_block_list))) - dev_warn_ratelimited(hdev->dev, - "Failed to unmap CB's va 0x%llx\n", - va_block->start); + mutex_lock(&hdev->mmu_lock); + hl_mmu_unmap_contiguous(ctx, cb->virtual_addr, cb->roundup_size); hl_mmu_invalidate_cache(hdev, true, MMU_OP_USERPTR); + mutex_unlock(&hdev->mmu_lock); - mutex_unlock(&ctx->mmu_lock); - - list_for_each_entry_safe(va_block, tmp, &cb->va_block_list, node) { - gen_pool_free(ctx->cb_va_pool, va_block->start, va_block->size); - list_del(&va_block->node); - kfree(va_block); - } + gen_pool_free(ctx->cb_va_pool, cb->virtual_addr, cb->roundup_size); } static void cb_fini(struct hl_device *hdev, struct hl_cb *cb) @@ -376,7 +313,6 @@ int hl_cb_destroy(struct hl_mem_mgr *mmg, u64 cb_handle) static int hl_cb_info(struct hl_mem_mgr *mmg, u64 handle, u32 flags, u32 *usage_cnt, u64 *device_va) { - struct hl_vm_va_block *va_block; struct hl_cb *cb; int rc = 0; @@ -388,9 +324,8 @@ static int hl_cb_info(struct hl_mem_mgr *mmg, } if (flags & HL_CB_FLAGS_GET_DEVICE_VA) { - va_block = list_first_entry(&cb->va_block_list, struct hl_vm_va_block, node); - if (va_block) { - *device_va = va_block->start; + if (cb->is_mmu_mapped) { + *device_va = cb->virtual_addr; } else { dev_err(mmg->dev, "CB is not mapped to the device's MMU\n"); rc = -EINVAL; @@ -566,16 +501,23 @@ int hl_cb_va_pool_init(struct hl_ctx *ctx) return -ENOMEM; } - rc = gen_pool_add(ctx->cb_va_pool, prop->cb_va_start_addr, - prop->cb_va_end_addr - prop->cb_va_start_addr, -1); + ctx->cb_va_pool_base = hl_reserve_va_block(hdev, ctx, HL_VA_RANGE_TYPE_HOST, + CB_VA_POOL_SIZE, HL_MMU_VA_ALIGNMENT_NOT_NEEDED); + if (!ctx->cb_va_pool_base) { + rc = -ENOMEM; + goto err_pool_destroy; + } + rc = gen_pool_add(ctx->cb_va_pool, ctx->cb_va_pool_base, CB_VA_POOL_SIZE, -1); if (rc) { dev_err(hdev->dev, "Failed to add memory to VA gen pool for CB mapping\n"); - goto err_pool_destroy; + goto err_unreserve_va_block; } return 0; +err_unreserve_va_block: + hl_unreserve_va_block(hdev, ctx, ctx->cb_va_pool_base, CB_VA_POOL_SIZE); err_pool_destroy: gen_pool_destroy(ctx->cb_va_pool); @@ -590,4 +532,5 @@ void hl_cb_va_pool_fini(struct hl_ctx *ctx) return; gen_pool_destroy(ctx->cb_va_pool); + hl_unreserve_va_block(hdev, ctx, ctx->cb_va_pool_base, CB_VA_POOL_SIZE); } diff --git a/drivers/misc/habanalabs/common/command_submission.c b/drivers/misc/habanalabs/common/command_submission.c index 90a4574cbe2d..fa05770865c6 100644 --- a/drivers/misc/habanalabs/common/command_submission.c +++ b/drivers/misc/habanalabs/common/command_submission.c @@ -12,7 +12,9 @@ #include <linux/slab.h> #define HL_CS_FLAGS_TYPE_MASK (HL_CS_FLAGS_SIGNAL | HL_CS_FLAGS_WAIT | \ - HL_CS_FLAGS_COLLECTIVE_WAIT) + HL_CS_FLAGS_COLLECTIVE_WAIT | HL_CS_FLAGS_RESERVE_SIGNALS_ONLY | \ + HL_CS_FLAGS_UNRESERVE_SIGNALS_ONLY | HL_CS_FLAGS_ENGINE_CORE_COMMAND) + #define MAX_TS_ITER_NUM 10 @@ -824,10 +826,10 @@ static void cs_timedout(struct work_struct *work) } /* Save only the first CS timeout parameters */ - rc = atomic_cmpxchg(&hdev->last_error.cs_timeout.write_enable, 1, 0); + rc = atomic_cmpxchg(&hdev->captured_err_info.cs_timeout.write_enable, 1, 0); if (rc) { - hdev->last_error.cs_timeout.timestamp = ktime_get(); - hdev->last_error.cs_timeout.seq = cs->sequence; + hdev->captured_err_info.cs_timeout.timestamp = ktime_get(); + hdev->captured_err_info.cs_timeout.seq = cs->sequence; event_mask = device_reset ? (HL_NOTIFIER_EVENT_CS_TIMEOUT | HL_NOTIFIER_EVENT_DEVICE_RESET) : HL_NOTIFIER_EVENT_CS_TIMEOUT; @@ -1242,6 +1244,8 @@ static enum hl_cs_type hl_cs_get_cs_type(u32 cs_type_flags) return CS_RESERVE_SIGNALS; else if (cs_type_flags & HL_CS_FLAGS_UNRESERVE_SIGNALS_ONLY) return CS_UNRESERVE_SIGNALS; + else if (cs_type_flags & HL_CS_FLAGS_ENGINE_CORE_COMMAND) + return CS_TYPE_ENGINE_CORE; else return CS_TYPE_DEFAULT; } @@ -1253,6 +1257,7 @@ static int hl_cs_sanity_checks(struct hl_fpriv *hpriv, union hl_cs_args *args) u32 cs_type_flags, num_chunks; enum hl_device_status status; enum hl_cs_type cs_type; + bool is_sync_stream; if (!hl_device_operational(hdev, &status)) { return -EBUSY; @@ -1276,9 +1281,10 @@ static int hl_cs_sanity_checks(struct hl_fpriv *hpriv, union hl_cs_args *args) cs_type = hl_cs_get_cs_type(cs_type_flags); num_chunks = args->in.num_chunks_execute; - if (unlikely((cs_type == CS_TYPE_SIGNAL || cs_type == CS_TYPE_WAIT || - cs_type == CS_TYPE_COLLECTIVE_WAIT) && - !hdev->supports_sync_stream)) { + is_sync_stream = (cs_type == CS_TYPE_SIGNAL || cs_type == CS_TYPE_WAIT || + cs_type == CS_TYPE_COLLECTIVE_WAIT); + + if (unlikely(is_sync_stream && !hdev->supports_sync_stream)) { dev_err(hdev->dev, "Sync stream CS is not supported\n"); return -EINVAL; } @@ -1288,7 +1294,7 @@ static int hl_cs_sanity_checks(struct hl_fpriv *hpriv, union hl_cs_args *args) dev_err(hdev->dev, "Got execute CS with 0 chunks, context %d\n", ctx->asid); return -EINVAL; } - } else if (num_chunks != 1) { + } else if (is_sync_stream && num_chunks != 1) { dev_err(hdev->dev, "Sync stream CS mandates one chunk only, context %d\n", ctx->asid); @@ -1584,13 +1590,14 @@ static int hl_cs_ctx_switch(struct hl_fpriv *hpriv, union hl_cs_args *args, struct hl_device *hdev = hpriv->hdev; struct hl_ctx *ctx = hpriv->ctx; bool need_soft_reset = false; - int rc = 0, do_ctx_switch; + int rc = 0, do_ctx_switch = 0; void __user *chunks; u32 num_chunks, tmp; u16 sob_count; int ret; - do_ctx_switch = atomic_cmpxchg(&ctx->thread_ctx_switch_token, 1, 0); + if (hdev->supports_ctx_switch) + do_ctx_switch = atomic_cmpxchg(&ctx->thread_ctx_switch_token, 1, 0); if (do_ctx_switch || (args->in.cs_flags & HL_CS_FLAGS_FORCE_RESTORE)) { mutex_lock(&hpriv->restore_phase_mutex); @@ -1661,9 +1668,10 @@ wait_again: } } - ctx->thread_ctx_switch_wait_token = 1; + if (hdev->supports_ctx_switch) + ctx->thread_ctx_switch_wait_token = 1; - } else if (!ctx->thread_ctx_switch_wait_token) { + } else if (hdev->supports_ctx_switch && !ctx->thread_ctx_switch_wait_token) { rc = hl_poll_timeout_memory(hdev, &ctx->thread_ctx_switch_wait_token, tmp, (tmp == 1), 100, jiffies_to_usecs(hdev->timeout_jiffies), false); @@ -2351,6 +2359,41 @@ out: return rc; } +static int cs_ioctl_engine_cores(struct hl_fpriv *hpriv, u64 engine_cores, + u32 num_engine_cores, u32 core_command) +{ + int rc; + struct hl_device *hdev = hpriv->hdev; + void __user *engine_cores_arr; + u32 *cores; + + if (!num_engine_cores || num_engine_cores > hdev->asic_prop.num_engine_cores) { + dev_err(hdev->dev, "Number of engine cores %d is invalid\n", num_engine_cores); + return -EINVAL; + } + + if (core_command != HL_ENGINE_CORE_RUN && core_command != HL_ENGINE_CORE_HALT) { + dev_err(hdev->dev, "Engine core command is invalid\n"); + return -EINVAL; + } + + engine_cores_arr = (void __user *) (uintptr_t) engine_cores; + cores = kmalloc_array(num_engine_cores, sizeof(u32), GFP_KERNEL); + if (!cores) + return -ENOMEM; + + if (copy_from_user(cores, engine_cores_arr, num_engine_cores * sizeof(u32))) { + dev_err(hdev->dev, "Failed to copy core-ids array from user\n"); + kfree(cores); + return -EFAULT; + } + + rc = hdev->asic_funcs->set_engine_cores(hdev, cores, num_engine_cores, core_command); + kfree(cores); + + return rc; +} + int hl_cs_ioctl(struct hl_fpriv *hpriv, void *data) { union hl_cs_args *args = data; @@ -2403,6 +2446,10 @@ int hl_cs_ioctl(struct hl_fpriv *hpriv, void *data) rc = cs_ioctl_unreserve_signals(hpriv, args->in.encaps_sig_handle_id); break; + case CS_TYPE_ENGINE_CORE: + rc = cs_ioctl_engine_cores(hpriv, args->in.engine_cores, + args->in.num_engine_cores, args->in.core_command); + break; default: rc = cs_ioctl_default(hpriv, chunks, num_chunks, &cs_seq, args->in.cs_flags, @@ -2524,7 +2571,7 @@ static int hl_cs_poll_fences(struct multi_cs_data *mcs_data, struct multi_cs_com ktime_t max_ktime, first_cs_time; enum hl_cs_wait_status status; - memset(fence_ptr, 0, arr_len * sizeof(*fence_ptr)); + memset(fence_ptr, 0, arr_len * sizeof(struct hl_fence *)); /* get all fences under the same lock */ rc = hl_ctx_get_fences(mcs_data->ctx, seq_arr, fence_ptr, arr_len); @@ -2826,7 +2873,7 @@ static int hl_multi_cs_wait_ioctl(struct hl_fpriv *hpriv, void *data) } /* allocate array for the fences */ - fence_arr = kmalloc_array(seq_arr_len, sizeof(*fence_arr), GFP_KERNEL); + fence_arr = kmalloc_array(seq_arr_len, sizeof(struct hl_fence *), GFP_KERNEL); if (!fence_arr) { rc = -ENOMEM; goto free_seq_arr; diff --git a/drivers/misc/habanalabs/common/debugfs.c b/drivers/misc/habanalabs/common/debugfs.c index 64439f33a19b..48d3ec8b5c82 100644 --- a/drivers/misc/habanalabs/common/debugfs.c +++ b/drivers/misc/habanalabs/common/debugfs.c @@ -291,14 +291,16 @@ static int vm_show(struct seq_file *s, void *data) if (ctx->asid != HL_KERNEL_ASID_ID && !list_empty(&ctx->hw_block_mem_list)) { seq_puts(s, "\nhw_block mappings:\n\n"); - seq_puts(s, " virtual address size HW block id\n"); - seq_puts(s, "-------------------------------------------\n"); + seq_puts(s, + " virtual address block size mapped size HW block id\n"); + seq_puts(s, + "---------------------------------------------------------------\n"); mutex_lock(&ctx->hw_block_list_lock); - list_for_each_entry(lnode, &ctx->hw_block_mem_list, - node) { + list_for_each_entry(lnode, &ctx->hw_block_mem_list, node) { seq_printf(s, - " 0x%-14lx %-6u %-9u\n", - lnode->vaddr, lnode->size, lnode->id); + " 0x%-14lx %-6u %-6u %-9u\n", + lnode->vaddr, lnode->block_size, lnode->mapped_size, + lnode->id); } mutex_unlock(&ctx->hw_block_list_lock); } @@ -591,6 +593,7 @@ static int engines_show(struct seq_file *s, void *data) struct hl_debugfs_entry *entry = s->private; struct hl_dbg_device_entry *dev_entry = entry->dev_entry; struct hl_device *hdev = dev_entry->hdev; + struct engines_data eng_data; if (hdev->reset_info.in_reset) { dev_warn_ratelimited(hdev->dev, @@ -598,7 +601,25 @@ static int engines_show(struct seq_file *s, void *data) return 0; } - hdev->asic_funcs->is_device_idle(hdev, NULL, 0, s); + eng_data.actual_size = 0; + eng_data.allocated_buf_size = HL_ENGINES_DATA_MAX_SIZE; + eng_data.buf = vmalloc(eng_data.allocated_buf_size); + if (!eng_data.buf) + return -ENOMEM; + + hdev->asic_funcs->is_device_idle(hdev, NULL, 0, &eng_data); + + if (eng_data.actual_size > eng_data.allocated_buf_size) { + dev_err(hdev->dev, + "Engines data size (%d Bytes) is bigger than allocated size (%u Bytes)\n", + eng_data.actual_size, eng_data.allocated_buf_size); + vfree(eng_data.buf); + return -ENOMEM; + } + + seq_write(s, eng_data.buf, eng_data.actual_size); + + vfree(eng_data.buf); return 0; } diff --git a/drivers/misc/habanalabs/common/device.c b/drivers/misc/habanalabs/common/device.c index b30aeb1c657f..233d8b46c831 100644 --- a/drivers/misc/habanalabs/common/device.c +++ b/drivers/misc/habanalabs/common/device.c @@ -13,6 +13,8 @@ #include <linux/pci.h> #include <linux/hwmon.h> +#include <trace/events/habanalabs.h> + #define HL_RESET_DELAY_USEC 10000 /* 10ms */ enum dma_alloc_type { @@ -26,8 +28,9 @@ enum dma_alloc_type { /* * hl_set_dram_bar- sets the bar to allow later access to address * - * @hdev: pointer to habanalabs device structure + * @hdev: pointer to habanalabs device structure. * @addr: the address the caller wants to access. + * @region: the PCI region. * * @return: the old BAR base address on success, U64_MAX for failure. * The caller should set it back to the old address after use. @@ -37,58 +40,64 @@ enum dma_alloc_type { * This function can be called also if the bar doesn't need to be set, * in that case it just won't change the base. */ -static uint64_t hl_set_dram_bar(struct hl_device *hdev, u64 addr) +static u64 hl_set_dram_bar(struct hl_device *hdev, u64 addr, struct pci_mem_region *region) { struct asic_fixed_properties *prop = &hdev->asic_prop; - u64 bar_base_addr; + u64 bar_base_addr, old_base; - bar_base_addr = addr & ~(prop->dram_pci_bar_size - 0x1ull); + if (is_power_of_2(prop->dram_pci_bar_size)) + bar_base_addr = addr & ~(prop->dram_pci_bar_size - 0x1ull); + else + bar_base_addr = DIV_ROUND_DOWN_ULL(addr, prop->dram_pci_bar_size) * + prop->dram_pci_bar_size; - return hdev->asic_funcs->set_dram_bar_base(hdev, bar_base_addr); -} + old_base = hdev->asic_funcs->set_dram_bar_base(hdev, bar_base_addr); + /* in case of success we need to update the new BAR base */ + if (old_base != U64_MAX) + region->region_base = bar_base_addr; + + return old_base; +} static int hl_access_sram_dram_region(struct hl_device *hdev, u64 addr, u64 *val, enum debugfs_access_type acc_type, enum pci_region region_type) { struct pci_mem_region *region = &hdev->pci_mem_region[region_type]; + void __iomem *acc_addr; u64 old_base = 0, rc; if (region_type == PCI_REGION_DRAM) { - old_base = hl_set_dram_bar(hdev, addr); + old_base = hl_set_dram_bar(hdev, addr, region); if (old_base == U64_MAX) return -EIO; } + acc_addr = hdev->pcie_bar[region->bar_id] + addr - region->region_base + + region->offset_in_bar; switch (acc_type) { case DEBUGFS_READ8: - *val = readb(hdev->pcie_bar[region->bar_id] + - addr - region->region_base + region->offset_in_bar); + *val = readb(acc_addr); break; case DEBUGFS_WRITE8: - writeb(*val, hdev->pcie_bar[region->bar_id] + - addr - region->region_base + region->offset_in_bar); + writeb(*val, acc_addr); break; case DEBUGFS_READ32: - *val = readl(hdev->pcie_bar[region->bar_id] + - addr - region->region_base + region->offset_in_bar); + *val = readl(acc_addr); break; case DEBUGFS_WRITE32: - writel(*val, hdev->pcie_bar[region->bar_id] + - addr - region->region_base + region->offset_in_bar); + writel(*val, acc_addr); break; case DEBUGFS_READ64: - *val = readq(hdev->pcie_bar[region->bar_id] + - addr - region->region_base + region->offset_in_bar); + *val = readq(acc_addr); break; case DEBUGFS_WRITE64: - writeq(*val, hdev->pcie_bar[region->bar_id] + - addr - region->region_base + region->offset_in_bar); + writeq(*val, acc_addr); break; } if (region_type == PCI_REGION_DRAM) { - rc = hl_set_dram_bar(hdev, old_base); + rc = hl_set_dram_bar(hdev, old_base, region); if (rc == U64_MAX) return -EIO; } @@ -97,9 +106,10 @@ static int hl_access_sram_dram_region(struct hl_device *hdev, u64 addr, u64 *val } static void *hl_dma_alloc_common(struct hl_device *hdev, size_t size, dma_addr_t *dma_handle, - gfp_t flag, enum dma_alloc_type alloc_type) + gfp_t flag, enum dma_alloc_type alloc_type, + const char *caller) { - void *ptr; + void *ptr = NULL; switch (alloc_type) { case DMA_ALLOC_COHERENT: @@ -113,11 +123,16 @@ static void *hl_dma_alloc_common(struct hl_device *hdev, size_t size, dma_addr_t break; } + if (trace_habanalabs_dma_alloc_enabled() && !ZERO_OR_NULL_PTR(ptr)) + trace_habanalabs_dma_alloc(hdev->dev, (u64) (uintptr_t) ptr, *dma_handle, size, + caller); + return ptr; } static void hl_asic_dma_free_common(struct hl_device *hdev, size_t size, void *cpu_addr, - dma_addr_t dma_handle, enum dma_alloc_type alloc_type) + dma_addr_t dma_handle, enum dma_alloc_type alloc_type, + const char *caller) { switch (alloc_type) { case DMA_ALLOC_COHERENT: @@ -130,39 +145,44 @@ static void hl_asic_dma_free_common(struct hl_device *hdev, size_t size, void *c hdev->asic_funcs->asic_dma_pool_free(hdev, cpu_addr, dma_handle); break; } + + trace_habanalabs_dma_free(hdev->dev, (u64) (uintptr_t) cpu_addr, dma_handle, size, caller); } -void *hl_asic_dma_alloc_coherent(struct hl_device *hdev, size_t size, dma_addr_t *dma_handle, - gfp_t flag) +void *hl_asic_dma_alloc_coherent_caller(struct hl_device *hdev, size_t size, dma_addr_t *dma_handle, + gfp_t flag, const char *caller) { - return hl_dma_alloc_common(hdev, size, dma_handle, flag, DMA_ALLOC_COHERENT); + return hl_dma_alloc_common(hdev, size, dma_handle, flag, DMA_ALLOC_COHERENT, caller); } -void hl_asic_dma_free_coherent(struct hl_device *hdev, size_t size, void *cpu_addr, - dma_addr_t dma_handle) +void hl_asic_dma_free_coherent_caller(struct hl_device *hdev, size_t size, void *cpu_addr, + dma_addr_t dma_handle, const char *caller) { - hl_asic_dma_free_common(hdev, size, cpu_addr, dma_handle, DMA_ALLOC_COHERENT); + hl_asic_dma_free_common(hdev, size, cpu_addr, dma_handle, DMA_ALLOC_COHERENT, caller); } -void *hl_cpu_accessible_dma_pool_alloc(struct hl_device *hdev, size_t size, dma_addr_t *dma_handle) +void *hl_cpu_accessible_dma_pool_alloc_caller(struct hl_device *hdev, size_t size, + dma_addr_t *dma_handle, const char *caller) { - return hl_dma_alloc_common(hdev, size, dma_handle, 0, DMA_ALLOC_CPU_ACCESSIBLE); + return hl_dma_alloc_common(hdev, size, dma_handle, 0, DMA_ALLOC_CPU_ACCESSIBLE, caller); } -void hl_cpu_accessible_dma_pool_free(struct hl_device *hdev, size_t size, void *vaddr) +void hl_cpu_accessible_dma_pool_free_caller(struct hl_device *hdev, size_t size, void *vaddr, + const char *caller) { - hl_asic_dma_free_common(hdev, size, vaddr, 0, DMA_ALLOC_CPU_ACCESSIBLE); + hl_asic_dma_free_common(hdev, size, vaddr, 0, DMA_ALLOC_CPU_ACCESSIBLE, caller); } -void *hl_asic_dma_pool_zalloc(struct hl_device *hdev, size_t size, gfp_t mem_flags, - dma_addr_t *dma_handle) +void *hl_asic_dma_pool_zalloc_caller(struct hl_device *hdev, size_t size, gfp_t mem_flags, + dma_addr_t *dma_handle, const char *caller) { - return hl_dma_alloc_common(hdev, size, dma_handle, mem_flags, DMA_ALLOC_POOL); + return hl_dma_alloc_common(hdev, size, dma_handle, mem_flags, DMA_ALLOC_POOL, caller); } -void hl_asic_dma_pool_free(struct hl_device *hdev, void *vaddr, dma_addr_t dma_addr) +void hl_asic_dma_pool_free_caller(struct hl_device *hdev, void *vaddr, dma_addr_t dma_addr, + const char *caller) { - hl_asic_dma_free_common(hdev, 0, vaddr, dma_addr, DMA_ALLOC_POOL); + hl_asic_dma_free_common(hdev, 0, vaddr, dma_addr, DMA_ALLOC_POOL, caller); } int hl_dma_map_sgtable(struct hl_device *hdev, struct sg_table *sgt, enum dma_data_direction dir) @@ -267,6 +287,30 @@ int hl_access_dev_mem(struct hl_device *hdev, enum pci_region region_type, return 0; } +void hl_engine_data_sprintf(struct engines_data *e, const char *fmt, ...) +{ + va_list args; + int str_size; + + va_start(args, fmt); + /* Calculate formatted string length. Assuming each string is null terminated, hence + * increment result by 1 + */ + str_size = vsnprintf(NULL, 0, fmt, args) + 1; + va_end(args); + + if ((e->actual_size + str_size) < e->allocated_buf_size) { + va_start(args, fmt); + vsnprintf(e->buf + e->actual_size, str_size, fmt, args); + va_end(args); + } + + /* Need to update the size even when not updating destination buffer to get the exact size + * of all input strings + */ + e->actual_size += str_size; +} + enum hl_device_status hl_device_status(struct hl_device *hdev) { enum hl_device_status status; @@ -322,6 +366,8 @@ static void hpriv_release(struct kref *ref) hdev = hpriv->hdev; + hdev->asic_funcs->send_device_activity(hdev, false); + put_pid(hpriv->taskpid); hl_debugfs_remove_file(hpriv); @@ -673,7 +719,7 @@ static int device_early_init(struct hl_device *hdev) if (hdev->asic_prop.completion_queues_count) { hdev->cq_wq = kcalloc(hdev->asic_prop.completion_queues_count, - sizeof(*hdev->cq_wq), + sizeof(struct workqueue_struct *), GFP_KERNEL); if (!hdev->cq_wq) { rc = -ENOMEM; @@ -1091,7 +1137,9 @@ int hl_device_resume(struct hl_device *hdev) /* 'in_reset' was set to true during suspend, now we must clear it in order * for hard reset to be performed */ + spin_lock(&hdev->reset_info.lock); hdev->reset_info.in_reset = 0; + spin_unlock(&hdev->reset_info.lock); rc = hl_device_reset(hdev, HL_DRV_RESET_HARD); if (rc) { @@ -1518,6 +1566,13 @@ kill_processes: */ hdev->disabled = false; + /* F/W security enabled indication might be updated after hard-reset */ + if (hard_reset) { + rc = hl_fw_read_preboot_status(hdev); + if (rc) + goto out_err; + } + rc = hdev->asic_funcs->hw_init(hdev); if (rc) { dev_err(hdev->dev, "failed to initialize the H/W after reset\n"); @@ -1556,7 +1611,7 @@ kill_processes: if (!hdev->asic_prop.fw_security_enabled) hl_fw_set_max_power(hdev); } else { - rc = hdev->asic_funcs->non_hard_reset_late_init(hdev); + rc = hdev->asic_funcs->compute_reset_late_init(hdev); if (rc) { if (reset_upon_device_release) dev_err(hdev->dev, @@ -1704,7 +1759,9 @@ int hl_device_init(struct hl_device *hdev, struct class *hclass) char *name; bool add_cdev_sysfs_on_err = false; - name = kasprintf(GFP_KERNEL, "hl%d", hdev->id / 2); + hdev->cdev_idx = hdev->id / 2; + + name = kasprintf(GFP_KERNEL, "hl%d", hdev->cdev_idx); if (!name) { rc = -ENOMEM; goto out_disabled; @@ -1719,7 +1776,7 @@ int hl_device_init(struct hl_device *hdev, struct class *hclass) if (rc) goto out_disabled; - name = kasprintf(GFP_KERNEL, "hl_controlD%d", hdev->id / 2); + name = kasprintf(GFP_KERNEL, "hl_controlD%d", hdev->cdev_idx); if (!name) { rc = -ENOMEM; goto free_dev; @@ -1806,7 +1863,7 @@ int hl_device_init(struct hl_device *hdev, struct class *hclass) } hdev->shadow_cs_queue = kcalloc(hdev->asic_prop.max_pending_cs, - sizeof(*hdev->shadow_cs_queue), GFP_KERNEL); + sizeof(struct hl_cs *), GFP_KERNEL); if (!hdev->shadow_cs_queue) { rc = -ENOMEM; goto cq_fini; @@ -1997,10 +2054,10 @@ out_disabled: if (hdev->pdev) dev_err(&hdev->pdev->dev, "Failed to initialize hl%d. Device is NOT usable !\n", - hdev->id / 2); + hdev->cdev_idx); else pr_err("Failed to initialize hl%d. Device is NOT usable !\n", - hdev->id / 2); + hdev->cdev_idx); return rc; } diff --git a/drivers/misc/habanalabs/common/firmware_if.c b/drivers/misc/habanalabs/common/firmware_if.c index 608ca67527a5..2de6a9bd564d 100644 --- a/drivers/misc/habanalabs/common/firmware_if.c +++ b/drivers/misc/habanalabs/common/firmware_if.c @@ -15,14 +15,6 @@ #define FW_FILE_MAX_SIZE 0x1400000 /* maximum size of 20MB */ -struct fw_binning_conf { - u64 tpc_binning; - u32 dec_binning; - u32 hbm_binning; - u32 edma_binning; - u32 mme_redundancy; -}; - static char *extract_fw_ver_from_str(const char *fw_str) { char *str, *fw_ver, *whitespace; @@ -260,7 +252,7 @@ int hl_fw_send_cpu_message(struct hl_device *hdev, u32 hw_queue_id, u32 *msg, struct cpucp_packet *pkt; dma_addr_t pkt_dma_addr; struct hl_bd *sent_bd; - u32 tmp, expected_ack_val, pi; + u32 tmp, expected_ack_val, pi, opcode; int rc; pkt = hl_cpu_accessible_dma_pool_alloc(hdev, len, &pkt_dma_addr); @@ -327,8 +319,35 @@ int hl_fw_send_cpu_message(struct hl_device *hdev, u32 hw_queue_id, u32 *msg, rc = (tmp & CPUCP_PKT_CTL_RC_MASK) >> CPUCP_PKT_CTL_RC_SHIFT; if (rc) { - dev_dbg(hdev->dev, "F/W ERROR %d for CPU packet %d\n", - rc, (tmp & CPUCP_PKT_CTL_OPCODE_MASK) >> CPUCP_PKT_CTL_OPCODE_SHIFT); + opcode = (tmp & CPUCP_PKT_CTL_OPCODE_MASK) >> CPUCP_PKT_CTL_OPCODE_SHIFT; + + if (!prop->supports_advanced_cpucp_rc) { + dev_dbg(hdev->dev, "F/W ERROR %d for CPU packet %d\n", rc, opcode); + goto scrub_descriptor; + } + + switch (rc) { + case cpucp_packet_invalid: + dev_err(hdev->dev, + "CPU packet %d is not supported by F/W\n", opcode); + break; + case cpucp_packet_fault: + dev_err(hdev->dev, + "F/W failed processing CPU packet %d\n", opcode); + break; + case cpucp_packet_invalid_pkt: + dev_dbg(hdev->dev, + "CPU packet %d is not supported by F/W\n", opcode); + break; + case cpucp_packet_invalid_params: + dev_err(hdev->dev, + "F/W reports invalid parameters for CPU packet %d\n", opcode); + break; + + default: + dev_err(hdev->dev, + "Unknown F/W ERROR %d for CPU packet %d\n", rc, opcode); + } /* propagate the return code from the f/w to the callers who want to check it */ if (result) @@ -340,6 +359,7 @@ int hl_fw_send_cpu_message(struct hl_device *hdev, u32 hw_queue_id, u32 *msg, *result = le64_to_cpu(pkt->result); } +scrub_descriptor: /* Scrub previous buffer descriptor 'ctl' field which contains the * previous PI value written during packet submission. * We must do this or else F/W can read an old value upon queue wraparound. @@ -462,6 +482,21 @@ void hl_fw_cpu_accessible_dma_pool_free(struct hl_device *hdev, size_t size, size); } +int hl_fw_send_device_activity(struct hl_device *hdev, bool open) +{ + struct cpucp_packet pkt; + int rc; + + memset(&pkt, 0, sizeof(pkt)); + pkt.ctl = cpu_to_le32(CPUCP_PACKET_ACTIVE_STATUS_SET << CPUCP_PKT_CTL_OPCODE_SHIFT); + pkt.value = cpu_to_le64(open); + rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt), 0, NULL); + if (rc) + dev_err(hdev->dev, "failed to send device activity msg(%u)\n", open); + + return rc; +} + int hl_fw_send_heartbeat(struct hl_device *hdev) { struct cpucp_packet hb_pkt; @@ -581,6 +616,15 @@ static bool fw_report_boot_dev0(struct hl_device *hdev, u32 err_val, dev_dbg(hdev->dev, "Device status0 %#x\n", sts_val); /* All warnings should go here in order not to reach the unknown error validation */ + if (err_val & CPU_BOOT_ERR0_EEPROM_FAIL) { + dev_warn(hdev->dev, + "Device boot warning - EEPROM failure detected, default settings applied\n"); + /* This is a warning so we don't want it to disable the + * device + */ + err_val &= ~CPU_BOOT_ERR0_EEPROM_FAIL; + } + if (err_val & CPU_BOOT_ERR0_DRAM_SKIPPED) { dev_warn(hdev->dev, "Device boot warning - Skipped DRAM initialization\n"); @@ -1476,6 +1520,8 @@ static void hl_fw_preboot_update_state(struct hl_device *hdev) */ prop->hard_reset_done_by_fw = !!(cpu_boot_dev_sts0 & CPU_BOOT_DEV_STS0_FW_HARD_RST_EN); + prop->fw_security_enabled = !!(cpu_boot_dev_sts0 & CPU_BOOT_DEV_STS0_SECURITY_EN); + dev_dbg(hdev->dev, "Firmware preboot boot device status0 %#x\n", cpu_boot_dev_sts0); @@ -1514,7 +1560,7 @@ int hl_fw_read_preboot_status(struct hl_device *hdev) hdev->asic_funcs->init_firmware_preload_params(hdev); /* - * In order to determine boot method (static VS dymanic) we need to + * In order to determine boot method (static VS dynamic) we need to * read the boot caps register */ rc = hl_fw_read_preboot_caps(hdev); @@ -1781,7 +1827,7 @@ int hl_fw_dynamic_send_protocol_cmd(struct hl_device *hdev, * * @return the CRC32 result * - * NOTE: kernel's CRC32 differ's from standard CRC32 calculation. + * NOTE: kernel's CRC32 differs from standard CRC32 calculation. * in order to be aligned we need to flip the bits of both the input * initial CRC and kernel's CRC32 result. * in addition both sides use initial CRC of 0, @@ -1798,7 +1844,7 @@ static u32 hl_fw_compat_crc32(u8 *data, size_t size) * * @hdev: pointer to the habanalabs device structure * @addr: device address of memory transfer - * @size: memory transter size + * @size: memory transfer size * @region: PCI memory region * * @return 0 on success, otherwise non-zero error code @@ -1854,50 +1900,36 @@ static int hl_fw_dynamic_validate_descriptor(struct hl_device *hdev, u64 addr; int rc; - if (le32_to_cpu(fw_desc->header.magic) != HL_COMMS_DESC_MAGIC) { - dev_err(hdev->dev, "Invalid magic for dynamic FW descriptor (%x)\n", + if (le32_to_cpu(fw_desc->header.magic) != HL_COMMS_DESC_MAGIC) + dev_warn(hdev->dev, "Invalid magic for dynamic FW descriptor (%x)\n", fw_desc->header.magic); - return -EIO; - } - if (fw_desc->header.version != HL_COMMS_DESC_VER) { - dev_err(hdev->dev, "Invalid version for dynamic FW descriptor (%x)\n", + if (fw_desc->header.version != HL_COMMS_DESC_VER) + dev_warn(hdev->dev, "Invalid version for dynamic FW descriptor (%x)\n", fw_desc->header.version); - return -EIO; - } /* - * calc CRC32 of data without header. + * Calc CRC32 of data without header. use the size of the descriptor + * reported by firmware, without calculating it ourself, to allow adding + * more fields to the lkd_fw_comms_desc structure. * note that no alignment/stride address issues here as all structures - * are 64 bit padded + * are 64 bit padded. */ - data_size = sizeof(struct lkd_fw_comms_desc) - - sizeof(struct comms_desc_header); data_ptr = (u8 *)fw_desc + sizeof(struct comms_desc_header); - - if (le16_to_cpu(fw_desc->header.size) != data_size) { - dev_err(hdev->dev, - "Invalid descriptor size 0x%x, expected size 0x%zx\n", - le16_to_cpu(fw_desc->header.size), data_size); - return -EIO; - } + data_size = le16_to_cpu(fw_desc->header.size); data_crc32 = hl_fw_compat_crc32(data_ptr, data_size); - if (data_crc32 != le32_to_cpu(fw_desc->header.crc32)) { - dev_err(hdev->dev, - "CRC32 mismatch for dynamic FW descriptor (%x:%x)\n", - data_crc32, fw_desc->header.crc32); + dev_err(hdev->dev, "CRC32 mismatch for dynamic FW descriptor (%x:%x)\n", + data_crc32, fw_desc->header.crc32); return -EIO; } /* find memory region to which to copy the image */ addr = le64_to_cpu(fw_desc->img_addr); region_id = hl_get_pci_memory_region(hdev, addr); - if ((region_id != PCI_REGION_SRAM) && - ((region_id != PCI_REGION_DRAM))) { - dev_err(hdev->dev, - "Invalid region to copy FW image address=%llx\n", addr); + if ((region_id != PCI_REGION_SRAM) && ((region_id != PCI_REGION_DRAM))) { + dev_err(hdev->dev, "Invalid region to copy FW image address=%llx\n", addr); return -EIO; } @@ -1914,8 +1946,7 @@ static int hl_fw_dynamic_validate_descriptor(struct hl_device *hdev, fw_loader->dynamic_loader.fw_image_size, region); if (rc) { - dev_err(hdev->dev, - "invalid mem transfer request for FW image\n"); + dev_err(hdev->dev, "invalid mem transfer request for FW image\n"); return rc; } @@ -2422,18 +2453,6 @@ static int hl_fw_dynamic_send_msg(struct hl_device *hdev, msg.reset_cause = *(__u8 *) data; break; - case HL_COMMS_BINNING_CONF_TYPE: - { - struct fw_binning_conf *binning_conf = (struct fw_binning_conf *) data; - - msg.tpc_binning_conf = cpu_to_le64(binning_conf->tpc_binning); - msg.dec_binning_conf = cpu_to_le32(binning_conf->dec_binning); - msg.hbm_binning_conf = cpu_to_le32(binning_conf->hbm_binning); - msg.edma_binning_conf = cpu_to_le32(binning_conf->edma_binning); - msg.mme_redundancy_conf = cpu_to_le32(binning_conf->mme_redundancy); - break; - } - default: dev_err(hdev->dev, "Send COMMS message - invalid message type %u\n", @@ -2503,13 +2522,6 @@ static int hl_fw_dynamic_init_cpu(struct hl_device *hdev, */ dyn_regs = &fw_loader->dynamic_loader.comm_desc.cpu_dyn_regs; - /* if no preboot loaded indication- wait for preboot */ - if (!(hdev->fw_loader.fw_comp_loaded & FW_TYPE_PREBOOT_CPU)) { - rc = hl_fw_wait_preboot_ready(hdev); - if (rc) - return -EIO; - } - rc = hl_fw_dynamic_send_protocol_cmd(hdev, fw_loader, COMMS_RST_STATE, 0, true, fw_loader->cpu_timeout); @@ -2547,7 +2559,7 @@ static int hl_fw_dynamic_init_cpu(struct hl_device *hdev, /* * when testing FW load (without Linux) on PLDM we don't want to * wait until boot fit is active as it may take several hours. - * instead, we load the bootfit and let it do all initializations in + * instead, we load the bootfit and let it do all initialization in * the background. */ if (hdev->pldm && !(hdev->fw_components & FW_TYPE_LINUX)) @@ -2961,3 +2973,49 @@ void hl_fw_set_max_power(struct hl_device *hdev) if (rc) dev_err(hdev->dev, "Failed to set max power, error %d\n", rc); } + +static int hl_fw_get_sec_attest_data(struct hl_device *hdev, u32 packet_id, void *data, u32 size, + u32 nonce, u32 timeout) +{ + struct cpucp_packet pkt = {}; + dma_addr_t req_dma_addr; + void *req_cpu_addr; + int rc; + + req_cpu_addr = hl_cpu_accessible_dma_pool_alloc(hdev, size, &req_dma_addr); + if (!data) { + dev_err(hdev->dev, + "Failed to allocate DMA memory for CPU-CP packet %u\n", packet_id); + return -ENOMEM; + } + + memset(data, 0, size); + + pkt.ctl = cpu_to_le32(packet_id << CPUCP_PKT_CTL_OPCODE_SHIFT); + pkt.addr = cpu_to_le64(req_dma_addr); + pkt.data_max_size = cpu_to_le32(size); + pkt.nonce = cpu_to_le32(nonce); + + rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt), + timeout, NULL); + if (rc) { + dev_err(hdev->dev, + "Failed to handle CPU-CP pkt %u, error %d\n", packet_id, rc); + goto out; + } + + memcpy(data, req_cpu_addr, size); + +out: + hl_cpu_accessible_dma_pool_free(hdev, size, req_cpu_addr); + + return rc; +} + +int hl_fw_get_sec_attest_info(struct hl_device *hdev, struct cpucp_sec_attest_info *sec_attest_info, + u32 nonce) +{ + return hl_fw_get_sec_attest_data(hdev, CPUCP_PACKET_SEC_ATTEST_GET, sec_attest_info, + sizeof(struct cpucp_sec_attest_info), nonce, + HL_CPUCP_SEC_ATTEST_INFO_TINEOUT_USEC); +} diff --git a/drivers/misc/habanalabs/common/habanalabs.h b/drivers/misc/habanalabs/common/habanalabs.h index d59bba9e55c9..58c95b13be69 100644 --- a/drivers/misc/habanalabs/common/habanalabs.h +++ b/drivers/misc/habanalabs/common/habanalabs.h @@ -66,6 +66,7 @@ struct hl_fpriv; #define HL_CPUCP_INFO_TIMEOUT_USEC 10000000 /* 10s */ #define HL_CPUCP_EEPROM_TIMEOUT_USEC 10000000 /* 10s */ #define HL_CPUCP_MON_DUMP_TIMEOUT_USEC 10000000 /* 10s */ +#define HL_CPUCP_SEC_ATTEST_INFO_TINEOUT_USEC 10000000 /* 10s */ #define HL_FW_STATUS_POLL_INTERVAL_USEC 10000 /* 10ms */ #define HL_FW_COMMS_STATUS_PLDM_POLL_INTERVAL_USEC 1000000 /* 1s */ @@ -94,7 +95,7 @@ struct hl_fpriv; #define MMU_HASH_TABLE_BITS 7 /* 1 << 7 buckets */ /** - * enum hl_mmu_page_table_locaion - mmu page table location + * enum hl_mmu_page_table_location - mmu page table location * @MMU_DR_PGT: page-table is located on device DRAM. * @MMU_HR_PGT: page-table is located on host memory. * @MMU_NUM_PGT_LOCATIONS: number of page-table locations currently supported. @@ -143,6 +144,25 @@ enum hl_mmu_enablement { #define HL_MAX_DCORES 8 +/* DMA alloc/free wrappers */ +#define hl_asic_dma_alloc_coherent(hdev, size, dma_handle, flags) \ + hl_asic_dma_alloc_coherent_caller(hdev, size, dma_handle, flags, __func__) + +#define hl_cpu_accessible_dma_pool_alloc(hdev, size, dma_handle) \ + hl_cpu_accessible_dma_pool_alloc_caller(hdev, size, dma_handle, __func__) + +#define hl_asic_dma_pool_zalloc(hdev, size, mem_flags, dma_handle) \ + hl_asic_dma_pool_zalloc_caller(hdev, size, mem_flags, dma_handle, __func__) + +#define hl_asic_dma_free_coherent(hdev, size, cpu_addr, dma_handle) \ + hl_asic_dma_free_coherent_caller(hdev, size, cpu_addr, dma_handle, __func__) + +#define hl_cpu_accessible_dma_pool_free(hdev, size, vaddr) \ + hl_cpu_accessible_dma_pool_free_caller(hdev, size, vaddr, __func__) + +#define hl_asic_dma_pool_free(hdev, vaddr, dma_addr) \ + hl_asic_dma_pool_free_caller(hdev, vaddr, dma_addr, __func__) + /* * Reset Flags * @@ -208,6 +228,7 @@ enum hl_protection_levels { * struct iterate_module_ctx - HW module iterator * @fn: function to apply to each HW module instance * @data: optional internal data to the function iterator + * @rc: return code for optional use of iterator/iterator-caller */ struct iterate_module_ctx { /* @@ -217,10 +238,12 @@ struct iterate_module_ctx { * @inst: HW module instance within the block * @offset: current HW module instance offset from the 1-st HW module instance * in the 1-st block - * @data: function specific data + * @ctx: the iterator context. */ - void (*fn)(struct hl_device *hdev, int block, int inst, u32 offset, void *data); + void (*fn)(struct hl_device *hdev, int block, int inst, u32 offset, + struct iterate_module_ctx *ctx); void *data; + int rc; }; struct hl_block_glbl_sec { @@ -342,7 +365,8 @@ enum hl_cs_type { CS_TYPE_WAIT, CS_TYPE_COLLECTIVE_WAIT, CS_RESERVE_SIGNALS, - CS_UNRESERVE_SIGNALS + CS_UNRESERVE_SIGNALS, + CS_TYPE_ENGINE_CORE }; /* @@ -544,10 +568,6 @@ struct hl_hints_range { * @tpc_binning_mask: which TPCs are binned. 0 means usable and 1 means binned. * @dram_enabled_mask: which DRAMs are enabled. * @dram_binning_mask: which DRAMs are binned. 0 means usable, 1 means binned. - * @cb_va_start_addr: virtual start address of command buffers which are mapped - * to the device's MMU. - * @cb_va_end_addr: virtual end address of command buffers which are mapped to - * the device's MMU. * @dram_hints_align_mask: dram va hint addresses alignment mask which is used * for hints validity check. * @cfg_base_address: config space base address. @@ -614,6 +634,7 @@ struct hl_hints_range { * which the property supports_user_set_page_size is true * (i.e. the DRAM supports multiple page sizes), otherwise * it will shall be equal to dram_page_size. + * @num_engine_cores: number of engine cpu cores * @collective_first_sob: first sync object available for collective use * @collective_first_mon: first monitor available for collective use * @sync_stream_first_sob: first sync object available for sync stream use @@ -658,6 +679,7 @@ struct hl_hints_range { * @set_max_power_on_device_init: true if need to set max power in F/W on device init. * @supports_user_set_page_size: true if user can set the allocation page size. * @dma_mask: the dma mask to be set for this device + * @supports_advanced_cpucp_rc: true if new cpucp opcodes are supported. */ struct asic_fixed_properties { struct hw_queue_properties *hw_queues_props; @@ -689,8 +711,6 @@ struct asic_fixed_properties { u64 tpc_binning_mask; u64 dram_enabled_mask; u64 dram_binning_mask; - u64 cb_va_start_addr; - u64 cb_va_end_addr; u64 dram_hints_align_mask; u64 cfg_base_address; u64 mmu_cache_mng_addr; @@ -734,6 +754,7 @@ struct asic_fixed_properties { u32 faulty_dram_cluster_map; u32 xbar_edge_enabled_mask; u32 device_mem_alloc_default_page_size; + u32 num_engine_cores; u16 collective_first_sob; u16 collective_first_mon; u16 sync_stream_first_sob; @@ -766,6 +787,7 @@ struct asic_fixed_properties { u8 set_max_power_on_device_init; u8 supports_user_set_page_size; u8 dma_mask; + u8 supports_advanced_cpucp_rc; }; /** @@ -797,7 +819,7 @@ struct hl_fence { * @lock: spinlock to protect fence. * @hdev: habanalabs device structure. * @hw_sob: the H/W SOB used in this signal/wait CS. - * @encaps_sig_hdl: encaps signals hanlder. + * @encaps_sig_hdl: encaps signals handler. * @cs_seq: command submission sequence number. * @type: type of the CS - signal/wait. * @sob_val: the SOB value that is used in this signal/wait CS. @@ -898,14 +920,14 @@ struct hl_mmap_mem_buf { * @buf: back pointer to the parent mappable memory buffer * @debugfs_list: node in debugfs list of command buffers. * @pool_list: node in pool list of command buffers. - * @va_block_list: list of virtual addresses blocks of the CB if it is mapped to - * the device's MMU. * @kernel_address: Holds the CB's kernel virtual address. + * @virtual_addr: Holds the CB's virtual address. * @bus_address: Holds the CB's DMA address. * @size: holds the CB's size. + * @roundup_size: holds the cb size after roundup to page size. * @cs_cnt: holds number of CS that this CB participates in. * @is_pool: true if CB was acquired from the pool, false otherwise. - * @is_internal: internaly allocated + * @is_internal: internally allocated * @is_mmu_mapped: true if the CB is mapped to the device's MMU. */ struct hl_cb { @@ -914,10 +936,11 @@ struct hl_cb { struct hl_mmap_mem_buf *buf; struct list_head debugfs_list; struct list_head pool_list; - struct list_head va_block_list; void *kernel_address; + u64 virtual_addr; dma_addr_t bus_address; u32 size; + u32 roundup_size; atomic_t cs_cnt; u8 is_pool; u8 is_internal; @@ -1113,7 +1136,7 @@ struct timestamp_reg_info { * @fence: hl fence object for interrupt completion * @cq_target_value: CQ target value * @cq_kernel_addr: CQ kernel address, to be used in the cq interrupt - * handler for taget value comparison + * handler for target value comparison */ struct hl_user_pending_interrupt { struct timestamp_reg_info ts_reg_info; @@ -1372,6 +1395,18 @@ struct fw_load_mgr { struct hl_cs; /** + * struct engines_data - asic engines data + * @buf: buffer for engines data in ascii + * @actual_size: actual size of data that was written by the driver to the allocated buffer + * @allocated_buf_size: total size of allocated buffer + */ +struct engines_data { + char *buf; + int actual_size; + u32 allocated_buf_size; +}; + +/** * struct hl_asic_funcs - ASIC specific functions that are can be called from * common code. * @early_init: sets up early driver state (pre sw_init), doesn't configure H/W. @@ -1434,11 +1469,9 @@ struct hl_cs; * @send_heartbeat: send is-alive packet to CPU-CP and verify response. * @debug_coresight: perform certain actions on Coresight for debugging. * @is_device_idle: return true if device is idle, false otherwise. - * @non_hard_reset_late_init: perform certain actions needed after a reset which is not hard-reset + * @compute_reset_late_init: perform certain actions needed after a compute reset * @hw_queues_lock: acquire H/W queues lock. * @hw_queues_unlock: release H/W queues lock. - * @kdma_lock: acquire H/W queues lock. Relevant from GRECO ASIC - * @kdma_unlock: release H/W queues lock. Relevant from GRECO ASIC * @get_pci_id: retrieve PCI ID. * @get_eeprom_data: retrieve EEPROM data from F/W. * @get_monitor_dump: retrieve monitor registers dump from F/W. @@ -1498,6 +1531,8 @@ struct hl_cs; * @check_if_razwi_happened: check if there was a razwi due to RR violation. * @access_dev_mem: access device memory * @set_dram_bar_base: set the base of the DRAM BAR + * @set_engine_cores: set a config command to enigne cores + * @send_device_activity: indication to FW about device availability */ struct hl_asic_funcs { int (*early_init)(struct hl_device *hdev); @@ -1570,13 +1605,11 @@ struct hl_asic_funcs { int (*mmu_prefetch_cache_range)(struct hl_ctx *ctx, u32 flags, u32 asid, u64 va, u64 size); int (*send_heartbeat)(struct hl_device *hdev); int (*debug_coresight)(struct hl_device *hdev, struct hl_ctx *ctx, void *data); - bool (*is_device_idle)(struct hl_device *hdev, u64 *mask_arr, - u8 mask_len, struct seq_file *s); - int (*non_hard_reset_late_init)(struct hl_device *hdev); + bool (*is_device_idle)(struct hl_device *hdev, u64 *mask_arr, u8 mask_len, + struct engines_data *e); + int (*compute_reset_late_init)(struct hl_device *hdev); void (*hw_queues_lock)(struct hl_device *hdev); void (*hw_queues_unlock)(struct hl_device *hdev); - void (*kdma_lock)(struct hl_device *hdev, int dcore_id); - void (*kdma_unlock)(struct hl_device *hdev, int dcore_id); u32 (*get_pci_id)(struct hl_device *hdev); int (*get_eeprom_data)(struct hl_device *hdev, void *data, size_t max_size); int (*get_monitor_dump)(struct hl_device *hdev, void *data); @@ -1634,6 +1667,9 @@ struct hl_asic_funcs { int (*access_dev_mem)(struct hl_device *hdev, enum pci_region region_type, u64 addr, u64 *val, enum debugfs_access_type acc_type); u64 (*set_dram_bar_base)(struct hl_device *hdev, u64 addr); + int (*set_engine_cores)(struct hl_device *hdev, u32 *core_ids, + u32 num_cores, u32 core_command); + int (*send_device_activity)(struct hl_device *hdev, bool open); }; @@ -1727,10 +1763,10 @@ struct hl_cs_outcome { /** * struct hl_cs_outcome_store - represents a limited store of completed CS outcomes - * @outcome_map: index of completed CS searcheable by sequence number + * @outcome_map: index of completed CS searchable by sequence number * @used_list: list of outcome objects currently in use * @free_list: list of outcome objects currently not in use - * @nodes_pool: a static pool of preallocated outcome objects + * @nodes_pool: a static pool of pre-allocated outcome objects * @db_lock: any operation on the store must take this lock */ struct hl_cs_outcome_store { @@ -1754,12 +1790,10 @@ struct hl_cs_outcome_store { * @refcount: reference counter for the context. Context is released only when * this hits 0l. It is incremented on CS and CS_WAIT. * @cs_pending: array of hl fence objects representing pending CS. - * @outcome_store: storage data structure used to remember ouitcomes of completed + * @outcome_store: storage data structure used to remember outcomes of completed * command submissions for a long time after CS id wraparound. * @va_range: holds available virtual addresses for host and dram mappings. * @mem_hash_lock: protects the mem_hash. - * @mmu_lock: protects the MMU page tables. Any change to the PGT, modifying the - * MMU hash or walking the PGT requires talking this lock. * @hw_block_list_lock: protects the HW block memory list. * @debugfs_list: node in debugfs list of contexts. * @hw_block_mem_list: list of HW block virtual mapped addresses. @@ -1767,6 +1801,7 @@ struct hl_cs_outcome_store { * @cb_va_pool: device VA pool for command buffers which are mapped to the * device's MMU. * @sig_mgr: encaps signals handle manager. + * @cb_va_pool_base: the base address for the device VA pool * @cs_sequence: sequence number for CS. Value is assigned to a CS and passed * to user so user could inquire about CS. It is used as * index to cs_pending array. @@ -1795,13 +1830,13 @@ struct hl_ctx { struct hl_cs_outcome_store outcome_store; struct hl_va_range *va_range[HL_VA_RANGE_TYPE_MAX]; struct mutex mem_hash_lock; - struct mutex mmu_lock; struct mutex hw_block_list_lock; struct list_head debugfs_list; struct list_head hw_block_mem_list; struct hl_cs_counters_atomic cs_counters; struct gen_pool *cb_va_pool; struct hl_encaps_signals_mgr sig_mgr; + u64 cb_va_pool_base; u64 cs_sequence; u64 *dram_default_hops; spinlock_t cs_lock; @@ -1823,7 +1858,6 @@ struct hl_ctx_mgr { }; - /* * COMMAND SUBMISSIONS */ @@ -1889,7 +1923,7 @@ struct hl_userptr { * @tdr_active: true if TDR was activated for this CS (to prevent * double TDR activation). * @aborted: true if CS was aborted due to some device error. - * @timestamp: true if a timestmap must be captured upon completion. + * @timestamp: true if a timestamp must be captured upon completion. * @staged_last: true if this is the last staged CS and needs completion. * @staged_first: true if this is the first staged CS and we need to receive * timeout for this CS. @@ -2047,14 +2081,16 @@ struct hl_vm_hash_node { * @node: node to hang on the list in context object. * @ctx: the context this node belongs to. * @vaddr: virtual address of the HW block. - * @size: size of the block. + * @block_size: size of the block. + * @mapped_size: size of the block which is mapped. May change if partial un-mappings are done. * @id: HW block id (handle). */ struct hl_vm_hw_block_list_node { struct list_head node; struct hl_ctx *ctx; unsigned long vaddr; - u32 size; + u32 block_size; + u32 mapped_size; u32 id; }; @@ -2214,7 +2250,7 @@ struct hl_info_list { /** * struct hl_debugfs_entry - debugfs dentry wrapper. - * @info_ent: dentry realted ops. + * @info_ent: dentry related ops. * @dev_entry: ASIC specific debugfs manager. */ struct hl_debugfs_entry { @@ -2492,7 +2528,7 @@ void hl_wreg(struct hl_device *hdev, u32 reg, u32 val); break; \ (val) = __elbi_read; \ } else {\ - (val) = RREG32((u32)addr); \ + (val) = RREG32((u32)(addr)); \ } \ if (cond) \ break; \ @@ -2503,7 +2539,7 @@ void hl_wreg(struct hl_device *hdev, u32 reg, u32 val); break; \ (val) = __elbi_read; \ } else {\ - (val) = RREG32((u32)addr); \ + (val) = RREG32((u32)(addr)); \ } \ break; \ } \ @@ -2919,7 +2955,7 @@ struct razwi_info { * struct undefined_opcode_info - info about last undefined opcode error * @timestamp: timestamp of the undefined opcode error * @cb_addr_streams: CB addresses (per stream) that are currently exists in the PQ - * entiers. In case all streams array entries are + * entries. In case all streams array entries are * filled with values, it means the execution was in Lower-CP. * @cq_addr: the address of the current handled command buffer * @cq_size: the size of the current handled command buffer @@ -2946,12 +2982,12 @@ struct undefined_opcode_info { }; /** - * struct last_error_session_info - info about last session errors occurred. - * @cs_timeout: CS timeout error last information. - * @razwi: razwi last information. + * struct hl_error_info - holds information collected during an error. + * @cs_timeout: CS timeout error information. + * @razwi: razwi information. * @undef_opcode: undefined opcode information */ -struct last_error_session_info { +struct hl_error_info { struct cs_timeout_info cs_timeout; struct razwi_info razwi; struct undefined_opcode_info undef_opcode; @@ -2960,7 +2996,7 @@ struct last_error_session_info { /** * struct hl_reset_info - holds current device reset information. * @lock: lock to protect critical reset flows. - * @compute_reset_cnt: number of compte resets since the driver was loaded. + * @compute_reset_cnt: number of compute resets since the driver was loaded. * @hard_reset_cnt: number of hard resets since the driver was loaded. * @hard_reset_schedule_flags: hard reset is scheduled to after current compute reset, * here we hold the hard reset flags. @@ -2971,7 +3007,7 @@ struct last_error_session_info { * @hard_reset_pending: is there a hard reset work pending. * @curr_reset_cause: saves an enumerated reset cause when a hard reset is * triggered, and cleared after it is shared with preboot. - * @prev_reset_trigger: saves the previous trigger which caused a reset, overidden + * @prev_reset_trigger: saves the previous trigger which caused a reset, overridden * with a new value on next reset * @reset_trigger_repeated: set if device reset is triggered more than once with * same cause. @@ -3041,6 +3077,12 @@ struct hl_reset_info { * @asid_mutex: protects asid_bitmap. * @send_cpu_message_lock: enforces only one message in Host <-> CPU-CP queue. * @debug_lock: protects critical section of setting debug mode for device + * @mmu_lock: protects the MMU page tables and invalidation h/w. Although the + * page tables are per context, the invalidation h/w is per MMU. + * Therefore, we can't allow multiple contexts (we only have two, + * user and kernel) to access the invalidation h/w at the same time. + * In addition, any change to the PGT, modifying the MMU hash or + * walking the PGT requires talking this lock. * @asic_prop: ASIC specific immutable properties. * @asic_funcs: ASIC specific functions. * @asic_specific: ASIC specific information to use only from ASIC files. @@ -3049,7 +3091,7 @@ struct hl_reset_info { * @hl_chip_info: ASIC's sensors information. * @device_status_description: device status description. * @hl_debugfs: device's debugfs manager. - * @cb_pool: list of preallocated CBs. + * @cb_pool: list of pre allocated CBs. * @cb_pool_lock: protects the CB pool. * @internal_cb_pool_virt_addr: internal command buffer pool virtual address. * @internal_cb_pool_dma_addr: internal command buffer pool dma address. @@ -3070,7 +3112,7 @@ struct hl_reset_info { * @state_dump_specs: constants and dictionaries needed to dump system state. * @multi_cs_completion: array of multi-CS completion. * @clk_throttling: holds information about current/previous clock throttling events - * @last_error: holds information about last session in which CS timeout or razwi error occurred. + * @captured_err_info: holds information about errors. * @reset_info: holds current device reset information. * @stream_master_qid_arr: pointer to array with QIDs of master streams. * @fw_major_version: major version of current loaded preboot. @@ -3111,7 +3153,8 @@ struct hl_reset_info { * @edma_binning: contains mask of edma engines that is received from the f/w which * indicates which edma engines are binned-out * @id: device minor. - * @id_control: minor of the control device + * @id_control: minor of the control device. + * @cdev_idx: char device index. Used for setting its name. * @cpu_pci_msb_addr: 50-bit extension bits for the device CPU's 40-bit * addresses. * @is_in_dram_scrub: true if dram scrub operation is on going. @@ -3165,6 +3208,7 @@ struct hl_reset_info { * Used only for testing. * @heartbeat: Controls if we want to enable the heartbeat mechanism vs. the f/w, which verifies * that the f/w is always alive. Used only for testing. + * @supports_ctx_switch: true if a ctx switch is required upon first submission. */ struct hl_device { struct pci_dev *pdev; @@ -3204,6 +3248,7 @@ struct hl_device { struct mutex asid_mutex; struct mutex send_cpu_message_lock; struct mutex debug_lock; + struct mutex mmu_lock; struct asic_fixed_properties asic_prop; const struct hl_asic_funcs *asic_funcs; void *asic_specific; @@ -3242,7 +3287,7 @@ struct hl_device { struct multi_cs_completion multi_cs_completion[ MULTI_CS_MAX_USER_CTX]; struct hl_clk_throttle clk_throttling; - struct last_error_session_info last_error; + struct hl_error_info captured_err_info; struct hl_reset_info reset_info; @@ -3271,6 +3316,7 @@ struct hl_device { u32 edma_binning; u16 id; u16 id_control; + u16 cdev_idx; u16 cpu_pci_msb_addr; u8 is_in_dram_scrub; u8 disabled; @@ -3300,6 +3346,7 @@ struct hl_device { u8 compute_ctx_in_release; u8 supports_mmu_prefetch; u8 reset_upon_device_release; + u8 supports_ctx_switch; /* Parameters for bring-up */ u64 nic_ports_mask; @@ -3426,15 +3473,18 @@ static inline bool hl_mem_area_crosses_range(u64 address, u32 size, } uint64_t hl_set_dram_bar_default(struct hl_device *hdev, u64 addr); -void *hl_asic_dma_alloc_coherent(struct hl_device *hdev, size_t size, dma_addr_t *dma_handle, - gfp_t flag); -void hl_asic_dma_free_coherent(struct hl_device *hdev, size_t size, void *cpu_addr, - dma_addr_t dma_handle); -void *hl_cpu_accessible_dma_pool_alloc(struct hl_device *hdev, size_t size, dma_addr_t *dma_handle); -void hl_cpu_accessible_dma_pool_free(struct hl_device *hdev, size_t size, void *vaddr); -void *hl_asic_dma_pool_zalloc(struct hl_device *hdev, size_t size, gfp_t mem_flags, - dma_addr_t *dma_handle); -void hl_asic_dma_pool_free(struct hl_device *hdev, void *vaddr, dma_addr_t dma_addr); +void *hl_asic_dma_alloc_coherent_caller(struct hl_device *hdev, size_t size, dma_addr_t *dma_handle, + gfp_t flag, const char *caller); +void hl_asic_dma_free_coherent_caller(struct hl_device *hdev, size_t size, void *cpu_addr, + dma_addr_t dma_handle, const char *caller); +void *hl_cpu_accessible_dma_pool_alloc_caller(struct hl_device *hdev, size_t size, + dma_addr_t *dma_handle, const char *caller); +void hl_cpu_accessible_dma_pool_free_caller(struct hl_device *hdev, size_t size, void *vaddr, + const char *caller); +void *hl_asic_dma_pool_zalloc_caller(struct hl_device *hdev, size_t size, gfp_t mem_flags, + dma_addr_t *dma_handle, const char *caller); +void hl_asic_dma_pool_free_caller(struct hl_device *hdev, void *vaddr, dma_addr_t dma_addr, + const char *caller); int hl_dma_map_sgtable(struct hl_device *hdev, struct sg_table *sgt, enum dma_data_direction dir); void hl_dma_unmap_sgtable(struct hl_device *hdev, struct sg_table *sgt, enum dma_data_direction dir); @@ -3513,6 +3563,7 @@ void hl_sysfs_fini(struct hl_device *hdev); int hl_hwmon_init(struct hl_device *hdev); void hl_hwmon_fini(struct hl_device *hdev); +void hl_hwmon_release_resources(struct hl_device *hdev); int hl_cb_create(struct hl_device *hdev, struct hl_mem_mgr *mmg, struct hl_ctx *ctx, u32 cb_size, bool internal_cb, @@ -3557,7 +3608,7 @@ void hl_hw_block_mem_init(struct hl_ctx *ctx); void hl_hw_block_mem_fini(struct hl_ctx *ctx); u64 hl_reserve_va_block(struct hl_device *hdev, struct hl_ctx *ctx, - enum hl_va_range_type type, u32 size, u32 alignment); + enum hl_va_range_type type, u64 size, u32 alignment); int hl_unreserve_va_block(struct hl_device *hdev, struct hl_ctx *ctx, u64 start_addr, u64 size); int hl_pin_host_memory(struct hl_device *hdev, u64 addr, u64 size, @@ -3674,6 +3725,7 @@ int hl_fw_dram_replaced_row_get(struct hl_device *hdev, struct cpucp_hbm_row_info *info); int hl_fw_dram_pending_row_get(struct hl_device *hdev, u32 *pend_rows_num); int hl_fw_cpucp_engine_core_asid_set(struct hl_device *hdev, u32 asid); +int hl_fw_send_device_activity(struct hl_device *hdev, bool open); int hl_pci_bars_map(struct hl_device *hdev, const char * const name[3], bool is_wc[3]); int hl_pci_elbi_read(struct hl_device *hdev, u64 addr, u32 *data); @@ -3697,6 +3749,8 @@ int hl_get_pwm_info(struct hl_device *hdev, int sensor_index, u32 attr, long *va void hl_set_pwm_info(struct hl_device *hdev, int sensor_index, u32 attr, long value); long hl_fw_get_max_power(struct hl_device *hdev); void hl_fw_set_max_power(struct hl_device *hdev); +int hl_fw_get_sec_attest_info(struct hl_device *hdev, struct cpucp_sec_attest_info *sec_attest_info, + u32 nonce); int hl_set_voltage(struct hl_device *hdev, int sensor_index, u32 attr, long value); int hl_set_current(struct hl_device *hdev, int sensor_index, u32 attr, long value); int hl_set_power(struct hl_device *hdev, int sensor_index, u32 attr, long value); @@ -3743,6 +3797,7 @@ struct hl_mmap_mem_buf * hl_mmap_mem_buf_alloc(struct hl_mem_mgr *mmg, struct hl_mmap_mem_buf_behavior *behavior, gfp_t gfp, void *args); +__printf(2, 3) void hl_engine_data_sprintf(struct engines_data *e, const char *fmt, ...); #ifdef CONFIG_DEBUG_FS diff --git a/drivers/misc/habanalabs/common/habanalabs_drv.c b/drivers/misc/habanalabs/common/habanalabs_drv.c index f733ead605e7..112632afe7d5 100644 --- a/drivers/misc/habanalabs/common/habanalabs_drv.c +++ b/drivers/misc/habanalabs/common/habanalabs_drv.c @@ -14,6 +14,9 @@ #include <linux/aer.h> #include <linux/module.h> +#define CREATE_TRACE_POINTS +#include <trace/events/habanalabs.h> + #define HL_DRIVER_AUTHOR "HabanaLabs Kernel Driver Team" #define HL_DRIVER_DESC "Driver for HabanaLabs's AI Accelerators" @@ -27,7 +30,10 @@ static struct class *hl_class; static DEFINE_IDR(hl_devs_idr); static DEFINE_MUTEX(hl_devs_idr_lock); -static int timeout_locked = 30; +#define HL_DEFAULT_TIMEOUT_LOCKED 30 /* 30 seconds */ +#define GAUDI_DEFAULT_TIMEOUT_LOCKED 600 /* 10 minutes */ + +static int timeout_locked = HL_DEFAULT_TIMEOUT_LOCKED; static int reset_on_lockup = 1; static int memory_scrub; static ulong boot_error_status_mask = ULONG_MAX; @@ -55,14 +61,12 @@ MODULE_PARM_DESC(boot_error_status_mask, #define PCI_IDS_GAUDI_SEC 0x1010 #define PCI_IDS_GAUDI2 0x1020 -#define PCI_IDS_GAUDI2_SEC 0x1030 static const struct pci_device_id ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_HABANALABS, PCI_IDS_GOYA), }, { PCI_DEVICE(PCI_VENDOR_ID_HABANALABS, PCI_IDS_GAUDI), }, { PCI_DEVICE(PCI_VENDOR_ID_HABANALABS, PCI_IDS_GAUDI_SEC), }, { PCI_DEVICE(PCI_VENDOR_ID_HABANALABS, PCI_IDS_GAUDI2), }, - { PCI_DEVICE(PCI_VENDOR_ID_HABANALABS, PCI_IDS_GAUDI2_SEC), }, { 0, } }; MODULE_DEVICE_TABLE(pci, ids); @@ -92,9 +96,6 @@ static enum hl_asic_type get_asic_type(u16 device) case PCI_IDS_GAUDI2: asic_type = ASIC_GAUDI2; break; - case PCI_IDS_GAUDI2_SEC: - asic_type = ASIC_GAUDI2_SEC; - break; default: asic_type = ASIC_INVALID; break; @@ -107,7 +108,6 @@ static bool is_asic_secured(enum hl_asic_type asic_type) { switch (asic_type) { case ASIC_GAUDI_SEC: - case ASIC_GAUDI2_SEC: return true; default: return false; @@ -161,7 +161,7 @@ int hl_device_open(struct inode *inode, struct file *filp) mutex_lock(&hdev->fpriv_list_lock); if (!hl_device_operational(hdev, &status)) { - dev_err_ratelimited(hdev->dev, + dev_dbg_ratelimited(hdev->dev, "Can't open %s because it is %s\n", dev_name(hdev->dev), hdev->status[status]); @@ -207,11 +207,13 @@ int hl_device_open(struct inode *inode, struct file *filp) list_add(&hpriv->dev_node, &hdev->fpriv_list); mutex_unlock(&hdev->fpriv_list_lock); + hdev->asic_funcs->send_device_activity(hdev, true); + hl_debugfs_add_file(hpriv); - atomic_set(&hdev->last_error.cs_timeout.write_enable, 1); - atomic_set(&hdev->last_error.razwi.write_enable, 1); - hdev->last_error.undef_opcode.write_enable = true; + atomic_set(&hdev->captured_err_info.cs_timeout.write_enable, 1); + atomic_set(&hdev->captured_err_info.razwi.write_enable, 1); + hdev->captured_err_info.undef_opcode.write_enable = true; hdev->open_counter++; hdev->last_successful_open_jif = jiffies; @@ -269,7 +271,7 @@ int hl_device_open_ctrl(struct inode *inode, struct file *filp) mutex_lock(&hdev->fpriv_ctrl_list_lock); if (!hl_device_operational(hdev, NULL)) { - dev_err_ratelimited(hdev->dev_ctrl, + dev_dbg_ratelimited(hdev->dev_ctrl, "Can't open %s because it is disabled or in reset\n", dev_name(hdev->dev_ctrl)); rc = -EPERM; @@ -314,12 +316,22 @@ static void copy_kernel_module_params_to_device(struct hl_device *hdev) hdev->boot_error_status_mask = boot_error_status_mask; } -static void fixup_device_params_per_asic(struct hl_device *hdev) +static void fixup_device_params_per_asic(struct hl_device *hdev, int timeout) { switch (hdev->asic_type) { - case ASIC_GOYA: case ASIC_GAUDI: case ASIC_GAUDI_SEC: + /* If user didn't request a different timeout than the default one, we have + * a different default timeout for Gaudi + */ + if (timeout == HL_DEFAULT_TIMEOUT_LOCKED) + hdev->timeout_jiffies = msecs_to_jiffies(GAUDI_DEFAULT_TIMEOUT_LOCKED * + MSEC_PER_SEC); + + hdev->reset_upon_device_release = 0; + break; + + case ASIC_GOYA: hdev->reset_upon_device_release = 0; break; @@ -339,7 +351,7 @@ static int fixup_device_params(struct hl_device *hdev) hdev->fw_comms_poll_interval_usec = HL_FW_STATUS_POLL_INTERVAL_USEC; if (tmp_timeout) - hdev->timeout_jiffies = msecs_to_jiffies(tmp_timeout * 1000); + hdev->timeout_jiffies = msecs_to_jiffies(tmp_timeout * MSEC_PER_SEC); else hdev->timeout_jiffies = MAX_SCHEDULE_TIMEOUT; @@ -360,7 +372,7 @@ static int fixup_device_params(struct hl_device *hdev) if (!hdev->cpu_queues_enable) hdev->heartbeat = 0; - fixup_device_params_per_asic(hdev); + fixup_device_params_per_asic(hdev, tmp_timeout); return 0; } diff --git a/drivers/misc/habanalabs/common/habanalabs_ioctl.c b/drivers/misc/habanalabs/common/habanalabs_ioctl.c index 6a30bd98ab5e..43afe40966e5 100644 --- a/drivers/misc/habanalabs/common/habanalabs_ioctl.c +++ b/drivers/misc/habanalabs/common/habanalabs_ioctl.c @@ -14,6 +14,7 @@ #include <linux/fs.h> #include <linux/uaccess.h> #include <linux/slab.h> +#include <linux/vmalloc.h> static u32 hl_debug_struct_size[HL_DEBUG_OP_TIMESTAMP + 1] = { [HL_DEBUG_OP_ETR] = sizeof(struct hl_debug_params_etr), @@ -103,6 +104,7 @@ static int hw_ip_info(struct hl_device *hdev, struct hl_info_args *args) hw_ip.edma_enabled_mask = prop->edma_enabled_mask; hw_ip.server_type = prop->server_type; + hw_ip.security_enabled = prop->fw_security_enabled; return copy_to_user(out, &hw_ip, min((size_t) size, sizeof(hw_ip))) ? -EFAULT : 0; @@ -591,8 +593,8 @@ static int cs_timeout_info(struct hl_fpriv *hpriv, struct hl_info_args *args) if ((!max_size) || (!out)) return -EINVAL; - info.seq = hdev->last_error.cs_timeout.seq; - info.timestamp = ktime_to_ns(hdev->last_error.cs_timeout.timestamp); + info.seq = hdev->captured_err_info.cs_timeout.seq; + info.timestamp = ktime_to_ns(hdev->captured_err_info.cs_timeout.timestamp); return copy_to_user(out, &info, min_t(size_t, max_size, sizeof(info))) ? -EFAULT : 0; } @@ -607,12 +609,12 @@ static int razwi_info(struct hl_fpriv *hpriv, struct hl_info_args *args) if ((!max_size) || (!out)) return -EINVAL; - info.timestamp = ktime_to_ns(hdev->last_error.razwi.timestamp); - info.addr = hdev->last_error.razwi.addr; - info.engine_id_1 = hdev->last_error.razwi.engine_id_1; - info.engine_id_2 = hdev->last_error.razwi.engine_id_2; - info.no_engine_id = hdev->last_error.razwi.non_engine_initiator; - info.error_type = hdev->last_error.razwi.type; + info.timestamp = ktime_to_ns(hdev->captured_err_info.razwi.timestamp); + info.addr = hdev->captured_err_info.razwi.addr; + info.engine_id_1 = hdev->captured_err_info.razwi.engine_id_1; + info.engine_id_2 = hdev->captured_err_info.razwi.engine_id_2; + info.no_engine_id = hdev->captured_err_info.razwi.non_engine_initiator; + info.error_type = hdev->captured_err_info.razwi.type; return copy_to_user(out, &info, min_t(size_t, max_size, sizeof(info))) ? -EFAULT : 0; } @@ -627,13 +629,13 @@ static int undefined_opcode_info(struct hl_fpriv *hpriv, struct hl_info_args *ar if ((!max_size) || (!out)) return -EINVAL; - info.timestamp = ktime_to_ns(hdev->last_error.undef_opcode.timestamp); - info.engine_id = hdev->last_error.undef_opcode.engine_id; - info.cq_addr = hdev->last_error.undef_opcode.cq_addr; - info.cq_size = hdev->last_error.undef_opcode.cq_size; - info.stream_id = hdev->last_error.undef_opcode.stream_id; - info.cb_addr_streams_len = hdev->last_error.undef_opcode.cb_addr_streams_len; - memcpy(info.cb_addr_streams, hdev->last_error.undef_opcode.cb_addr_streams, + info.timestamp = ktime_to_ns(hdev->captured_err_info.undef_opcode.timestamp); + info.engine_id = hdev->captured_err_info.undef_opcode.engine_id; + info.cq_addr = hdev->captured_err_info.undef_opcode.cq_addr; + info.cq_size = hdev->captured_err_info.undef_opcode.cq_size; + info.stream_id = hdev->captured_err_info.undef_opcode.stream_id; + info.cb_addr_streams_len = hdev->captured_err_info.undef_opcode.cb_addr_streams_len; + memcpy(info.cb_addr_streams, hdev->captured_err_info.undef_opcode.cb_addr_streams, sizeof(info.cb_addr_streams)); return copy_to_user(out, &info, min_t(size_t, max_size, sizeof(info))) ? -EFAULT : 0; @@ -660,6 +662,55 @@ static int dev_mem_alloc_page_sizes_info(struct hl_fpriv *hpriv, struct hl_info_ return copy_to_user(out, &info, min_t(size_t, max_size, sizeof(info))) ? -EFAULT : 0; } +static int sec_attest_info(struct hl_fpriv *hpriv, struct hl_info_args *args) +{ + void __user *out = (void __user *) (uintptr_t) args->return_pointer; + struct cpucp_sec_attest_info *sec_attest_info; + struct hl_info_sec_attest *info; + u32 max_size = args->return_size; + int rc; + + if ((!max_size) || (!out)) + return -EINVAL; + + sec_attest_info = kmalloc(sizeof(*sec_attest_info), GFP_KERNEL); + if (!sec_attest_info) + return -ENOMEM; + + info = kmalloc(sizeof(*info), GFP_KERNEL); + if (!info) { + rc = -ENOMEM; + goto free_sec_attest_info; + } + + rc = hl_fw_get_sec_attest_info(hpriv->hdev, sec_attest_info, args->sec_attest_nonce); + if (rc) + goto free_info; + + info->nonce = le32_to_cpu(sec_attest_info->nonce); + info->pcr_quote_len = le16_to_cpu(sec_attest_info->pcr_quote_len); + info->pub_data_len = le16_to_cpu(sec_attest_info->pub_data_len); + info->certificate_len = le16_to_cpu(sec_attest_info->certificate_len); + info->pcr_num_reg = sec_attest_info->pcr_num_reg; + info->pcr_reg_len = sec_attest_info->pcr_reg_len; + info->quote_sig_len = sec_attest_info->quote_sig_len; + memcpy(&info->pcr_data, &sec_attest_info->pcr_data, sizeof(info->pcr_data)); + memcpy(&info->pcr_quote, &sec_attest_info->pcr_quote, sizeof(info->pcr_quote)); + memcpy(&info->public_data, &sec_attest_info->public_data, sizeof(info->public_data)); + memcpy(&info->certificate, &sec_attest_info->certificate, sizeof(info->certificate)); + memcpy(&info->quote_sig, &sec_attest_info->quote_sig, sizeof(info->quote_sig)); + + rc = copy_to_user(out, info, + min_t(size_t, max_size, sizeof(*info))) ? -EFAULT : 0; + +free_info: + kfree(info); +free_sec_attest_info: + kfree(sec_attest_info); + + return rc; +} + static int eventfd_register(struct hl_fpriv *hpriv, struct hl_info_args *args) { int rc; @@ -697,6 +748,42 @@ static int eventfd_unregister(struct hl_fpriv *hpriv, struct hl_info_args *args) return 0; } +static int engine_status_info(struct hl_fpriv *hpriv, struct hl_info_args *args) +{ + void __user *out = (void __user *) (uintptr_t) args->return_pointer; + u32 status_buf_size = args->return_size; + struct hl_device *hdev = hpriv->hdev; + struct engines_data eng_data; + int rc; + + if ((status_buf_size < SZ_1K) || (status_buf_size > HL_ENGINES_DATA_MAX_SIZE) || (!out)) + return -EINVAL; + + eng_data.actual_size = 0; + eng_data.allocated_buf_size = status_buf_size; + eng_data.buf = vmalloc(status_buf_size); + if (!eng_data.buf) + return -ENOMEM; + + hdev->asic_funcs->is_device_idle(hdev, NULL, 0, &eng_data); + + if (eng_data.actual_size > eng_data.allocated_buf_size) { + dev_err(hdev->dev, + "Engines data size (%d Bytes) is bigger than allocated size (%u Bytes)\n", + eng_data.actual_size, status_buf_size); + vfree(eng_data.buf); + return -ENOMEM; + } + + args->user_buffer_actual_size = eng_data.actual_size; + rc = copy_to_user(out, eng_data.buf, min_t(size_t, status_buf_size, eng_data.actual_size)) ? + -EFAULT : 0; + + vfree(eng_data.buf); + + return rc; +} + static int _hl_info_ioctl(struct hl_fpriv *hpriv, void *data, struct device *dev) { @@ -806,12 +893,18 @@ static int _hl_info_ioctl(struct hl_fpriv *hpriv, void *data, case HL_INFO_DRAM_PENDING_ROWS: return dram_pending_rows_info(hpriv, args); + case HL_INFO_SECURED_ATTESTATION: + return sec_attest_info(hpriv, args); + case HL_INFO_REGISTER_EVENTFD: return eventfd_register(hpriv, args); case HL_INFO_UNREGISTER_EVENTFD: return eventfd_unregister(hpriv, args); + case HL_INFO_ENGINE_STATUS: + return engine_status_info(hpriv, args); + default: dev_err(dev, "Invalid request %d\n", args->op); rc = -EINVAL; diff --git a/drivers/misc/habanalabs/common/hw_queue.c b/drivers/misc/habanalabs/common/hw_queue.c index 3f15ab9d827f..d0087c0ec48c 100644 --- a/drivers/misc/habanalabs/common/hw_queue.c +++ b/drivers/misc/habanalabs/common/hw_queue.c @@ -826,9 +826,7 @@ static int ext_and_cpu_queue_init(struct hl_device *hdev, struct hl_hw_queue *q, q->kernel_address = p; - q->shadow_queue = kmalloc_array(HL_QUEUE_LENGTH, - sizeof(*q->shadow_queue), - GFP_KERNEL); + q->shadow_queue = kmalloc_array(HL_QUEUE_LENGTH, sizeof(struct hl_cs_job *), GFP_KERNEL); if (!q->shadow_queue) { dev_err(hdev->dev, "Failed to allocate shadow queue for H/W queue %d\n", diff --git a/drivers/misc/habanalabs/common/hwmon.c b/drivers/misc/habanalabs/common/hwmon.c index 57f5d2c48330..55eb0203817f 100644 --- a/drivers/misc/habanalabs/common/hwmon.c +++ b/drivers/misc/habanalabs/common/hwmon.c @@ -194,7 +194,8 @@ int hl_build_hwmon_channel_info(struct hl_device *hdev, struct cpucp_sensor *sen curr_arr[sensors_by_type_next_index[type]++] = flags; } - channels_info = kcalloc(num_active_sensor_types + 1, sizeof(*channels_info), GFP_KERNEL); + channels_info = kcalloc(num_active_sensor_types + 1, sizeof(struct hwmon_channel_info *), + GFP_KERNEL); if (!channels_info) { rc = -ENOMEM; goto channels_info_array_err; @@ -910,3 +911,24 @@ void hl_hwmon_fini(struct hl_device *hdev) hwmon_device_unregister(hdev->hwmon_dev); } + +void hl_hwmon_release_resources(struct hl_device *hdev) +{ + const struct hwmon_channel_info **channel_info_arr; + int i = 0; + + if (!hdev->hl_chip_info->info) + return; + + channel_info_arr = hdev->hl_chip_info->info; + + while (channel_info_arr[i]) { + kfree(channel_info_arr[i]->config); + kfree(channel_info_arr[i]); + i++; + } + + kfree(channel_info_arr); + + hdev->hl_chip_info->info = NULL; +} diff --git a/drivers/misc/habanalabs/common/memory.c b/drivers/misc/habanalabs/common/memory.c index 61bc1bfe984a..ef28f3b37b93 100644 --- a/drivers/misc/habanalabs/common/memory.c +++ b/drivers/misc/habanalabs/common/memory.c @@ -457,7 +457,7 @@ static void merge_va_blocks_locked(struct hl_device *hdev, prev = list_prev_entry(va_block, node); if (&prev->node != va_list && prev->end + 1 == va_block->start) { prev->end = va_block->end; - prev->size = prev->end - prev->start; + prev->size = prev->end - prev->start + 1; list_del(&va_block->node); kfree(va_block); va_block = prev; @@ -466,7 +466,7 @@ static void merge_va_blocks_locked(struct hl_device *hdev, next = list_next_entry(va_block, node); if (&next->node != va_list && va_block->end + 1 == next->start) { next->start = va_block->start; - next->size = next->end - next->start; + next->size = next->end - next->start + 1; list_del(&va_block->node); kfree(va_block); } @@ -755,7 +755,7 @@ out: * - Return the start address of the virtual block. */ u64 hl_reserve_va_block(struct hl_device *hdev, struct hl_ctx *ctx, - enum hl_va_range_type type, u32 size, u32 alignment) + enum hl_va_range_type type, u64 size, u32 alignment) { return get_va_block(hdev, ctx->va_range[type], size, 0, max(alignment, ctx->va_range[type]->page_size), @@ -1210,18 +1210,18 @@ static int map_device_va(struct hl_ctx *ctx, struct hl_mem_in *args, u64 *device goto va_block_err; } - mutex_lock(&ctx->mmu_lock); + mutex_lock(&hdev->mmu_lock); rc = map_phys_pg_pack(ctx, ret_vaddr, phys_pg_pack); if (rc) { dev_err(hdev->dev, "mapping page pack failed for handle %u\n", handle); - mutex_unlock(&ctx->mmu_lock); + mutex_unlock(&hdev->mmu_lock); goto map_err; } rc = hl_mmu_invalidate_cache_range(hdev, false, *vm_type | MMU_OP_SKIP_LOW_CACHE_INV, ctx->asid, ret_vaddr, phys_pg_pack->total_size); - mutex_unlock(&ctx->mmu_lock); + mutex_unlock(&hdev->mmu_lock); if (rc) goto map_err; @@ -1362,7 +1362,7 @@ static int unmap_device_va(struct hl_ctx *ctx, struct hl_mem_in *args, else vaddr &= ~(((u64) phys_pg_pack->page_size) - 1); - mutex_lock(&ctx->mmu_lock); + mutex_lock(&hdev->mmu_lock); unmap_phys_pg_pack(ctx, vaddr, phys_pg_pack); @@ -1375,7 +1375,7 @@ static int unmap_device_va(struct hl_ctx *ctx, struct hl_mem_in *args, rc = hl_mmu_invalidate_cache_range(hdev, true, *vm_type, ctx->asid, vaddr, phys_pg_pack->total_size); - mutex_unlock(&ctx->mmu_lock); + mutex_unlock(&hdev->mmu_lock); /* * If the context is closing we don't need to check for the MMU cache @@ -1418,18 +1418,23 @@ vm_type_err: return rc; } -static int map_block(struct hl_device *hdev, u64 address, u64 *handle, - u32 *size) +static int map_block(struct hl_device *hdev, u64 address, u64 *handle, u32 *size) { - u32 block_id = 0; + u32 block_id; int rc; + *handle = 0; + if (size) + *size = 0; + rc = hdev->asic_funcs->get_hw_block_id(hdev, address, size, &block_id); + if (rc) + return rc; *handle = block_id | HL_MMAP_TYPE_BLOCK; *handle <<= PAGE_SHIFT; - return rc; + return 0; } static void hw_block_vm_close(struct vm_area_struct *vma) @@ -1437,6 +1442,13 @@ static void hw_block_vm_close(struct vm_area_struct *vma) struct hl_vm_hw_block_list_node *lnode = (struct hl_vm_hw_block_list_node *) vma->vm_private_data; struct hl_ctx *ctx = lnode->ctx; + long new_mmap_size; + + new_mmap_size = lnode->mapped_size - (vma->vm_end - vma->vm_start); + if (new_mmap_size > 0) { + lnode->mapped_size = new_mmap_size; + return; + } mutex_lock(&ctx->hw_block_list_lock); list_del(&lnode->node); @@ -1487,23 +1499,23 @@ int hl_hw_block_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma) if (!lnode) return -ENOMEM; - vma->vm_ops = &hw_block_vm_ops; - vma->vm_private_data = lnode; - - hl_ctx_get(ctx); - rc = hdev->asic_funcs->hw_block_mmap(hdev, vma, block_id, block_size); if (rc) { - hl_ctx_put(ctx); kfree(lnode); return rc; } + hl_ctx_get(ctx); + lnode->ctx = ctx; lnode->vaddr = vma->vm_start; - lnode->size = block_size; + lnode->block_size = block_size; + lnode->mapped_size = lnode->block_size; lnode->id = block_id; + vma->vm_private_data = lnode; + vma->vm_ops = &hw_block_vm_ops; + mutex_lock(&ctx->hw_block_list_lock); list_add_tail(&lnode->node, &ctx->hw_block_mem_list); mutex_unlock(&ctx->hw_block_list_lock); @@ -2296,8 +2308,7 @@ static int get_user_memory(struct hl_device *hdev, u64 addr, u64 size, return -EFAULT; } - userptr->pages = kvmalloc_array(npages, sizeof(*userptr->pages), - GFP_KERNEL); + userptr->pages = kvmalloc_array(npages, sizeof(struct page *), GFP_KERNEL); if (!userptr->pages) return -ENOMEM; @@ -2759,13 +2770,13 @@ void hl_vm_ctx_fini(struct hl_ctx *ctx) unmap_device_va(ctx, &args, true); } - mutex_lock(&ctx->mmu_lock); + mutex_lock(&hdev->mmu_lock); /* invalidate the cache once after the unmapping loop */ hl_mmu_invalidate_cache(hdev, true, MMU_OP_USERPTR); hl_mmu_invalidate_cache(hdev, true, MMU_OP_PHYS_PACK); - mutex_unlock(&ctx->mmu_lock); + mutex_unlock(&hdev->mmu_lock); INIT_LIST_HEAD(&free_list); diff --git a/drivers/misc/habanalabs/common/memory_mgr.c b/drivers/misc/habanalabs/common/memory_mgr.c index 56df962d2f3c..1936d653699e 100644 --- a/drivers/misc/habanalabs/common/memory_mgr.c +++ b/drivers/misc/habanalabs/common/memory_mgr.c @@ -11,7 +11,7 @@ * hl_mmap_mem_buf_get - increase the buffer refcount and return a pointer to * the buffer descriptor. * - * @mmg: parent unifed memory manager + * @mmg: parent unified memory manager * @handle: requested buffer handle * * Find the buffer in the store and return a pointer to its descriptor. @@ -104,7 +104,7 @@ int hl_mmap_mem_buf_put(struct hl_mmap_mem_buf *buf) * hl_mmap_mem_buf_put_handle - decrease the reference to the buffer with the * given handle. * - * @mmg: parent unifed memory manager + * @mmg: parent unified memory manager * @handle: requested buffer handle * * Decrease the reference to the buffer, and release it if it was the last one. @@ -137,7 +137,7 @@ int hl_mmap_mem_buf_put_handle(struct hl_mem_mgr *mmg, u64 handle) /** * hl_mmap_mem_buf_alloc - allocate a new mappable buffer * - * @mmg: parent unifed memory manager + * @mmg: parent unified memory manager * @behavior: behavior object describing this buffer polymorphic behavior * @gfp: gfp flags to use for the memory allocations * @args: additional args passed to behavior->alloc @@ -222,7 +222,7 @@ static const struct vm_operations_struct hl_mmap_mem_buf_vm_ops = { /** * hl_mem_mgr_mmap - map the given buffer to the user * - * @mmg: unifed memory manager + * @mmg: unified memory manager * @vma: the vma object for which mmap was closed. * @args: additional args passed to behavior->mmap * @@ -322,7 +322,7 @@ void hl_mem_mgr_init(struct device *dev, struct hl_mem_mgr *mmg) /** * hl_mem_mgr_fini - release unified memory manager * - * @mmg: parent unifed memory manager + * @mmg: parent unified memory manager * * Release the unified memory manager. Shall be called from an interrupt context. */ diff --git a/drivers/misc/habanalabs/common/mmu/mmu.c b/drivers/misc/habanalabs/common/mmu/mmu.c index 60740de47b34..cf8946266615 100644 --- a/drivers/misc/habanalabs/common/mmu/mmu.c +++ b/drivers/misc/habanalabs/common/mmu/mmu.c @@ -9,6 +9,8 @@ #include "../habanalabs.h" +#include <trace/events/habanalabs.h> + /** * hl_mmu_get_funcs() - get MMU functions structure * @hdev: habanalabs device structure. @@ -45,6 +47,8 @@ int hl_mmu_init(struct hl_device *hdev) if (!hdev->mmu_enable) return 0; + mutex_init(&hdev->mmu_lock); + if (hdev->mmu_func[MMU_DR_PGT].init != NULL) { rc = hdev->mmu_func[MMU_DR_PGT].init(hdev); if (rc) @@ -86,6 +90,8 @@ void hl_mmu_fini(struct hl_device *hdev) if (hdev->mmu_func[MMU_HR_PGT].fini != NULL) hdev->mmu_func[MMU_HR_PGT].fini(hdev); + + mutex_destroy(&hdev->mmu_lock); } /** @@ -104,8 +110,6 @@ int hl_mmu_ctx_init(struct hl_ctx *ctx) if (!hdev->mmu_enable) return 0; - mutex_init(&ctx->mmu_lock); - if (hdev->mmu_func[MMU_DR_PGT].ctx_init != NULL) { rc = hdev->mmu_func[MMU_DR_PGT].ctx_init(ctx); if (rc) @@ -149,8 +153,6 @@ void hl_mmu_ctx_fini(struct hl_ctx *ctx) if (hdev->mmu_func[MMU_HR_PGT].ctx_fini != NULL) hdev->mmu_func[MMU_HR_PGT].ctx_fini(ctx); - - mutex_destroy(&ctx->mmu_lock); } /* @@ -259,6 +261,9 @@ int hl_mmu_unmap_page(struct hl_ctx *ctx, u64 virt_addr, u32 page_size, bool flu if (flush_pte) mmu_funcs->flush(ctx); + if (trace_habanalabs_mmu_unmap_enabled() && !rc) + trace_habanalabs_mmu_unmap(hdev->dev, virt_addr, 0, page_size, flush_pte); + return rc; } @@ -344,6 +349,8 @@ int hl_mmu_map_page(struct hl_ctx *ctx, u64 virt_addr, u64 phys_addr, u32 page_s if (flush_pte) mmu_funcs->flush(ctx); + trace_habanalabs_mmu_map(hdev->dev, virt_addr, phys_addr, page_size, flush_pte); + return 0; err: @@ -403,6 +410,8 @@ int hl_mmu_map_contiguous(struct hl_ctx *ctx, u64 virt_addr, dev_err(hdev->dev, "Map failed for va 0x%llx to pa 0x%llx\n", curr_va, curr_pa); + /* last mapping failed so don't try to unmap it - reduce off by page_size */ + off -= page_size; goto unmap; } } @@ -600,9 +609,9 @@ int hl_mmu_get_tlb_info(struct hl_ctx *ctx, u64 virt_addr, pgt_residency = mmu_prop->host_resident ? MMU_HR_PGT : MMU_DR_PGT; mmu_funcs = hl_mmu_get_funcs(hdev, pgt_residency, is_dram_addr); - mutex_lock(&ctx->mmu_lock); + mutex_lock(&hdev->mmu_lock); rc = mmu_funcs->get_tlb_info(ctx, virt_addr, hops); - mutex_unlock(&ctx->mmu_lock); + mutex_unlock(&hdev->mmu_lock); if (rc) return rc; @@ -692,16 +701,16 @@ static void hl_mmu_prefetch_work_function(struct work_struct *work) { struct hl_prefetch_work *pfw = container_of(work, struct hl_prefetch_work, pf_work); struct hl_ctx *ctx = pfw->ctx; + struct hl_device *hdev = ctx->hdev; - if (!hl_device_operational(ctx->hdev, NULL)) + if (!hl_device_operational(hdev, NULL)) goto put_ctx; - mutex_lock(&ctx->mmu_lock); + mutex_lock(&hdev->mmu_lock); - ctx->hdev->asic_funcs->mmu_prefetch_cache_range(ctx, pfw->flags, pfw->asid, - pfw->va, pfw->size); + hdev->asic_funcs->mmu_prefetch_cache_range(ctx, pfw->flags, pfw->asid, pfw->va, pfw->size); - mutex_unlock(&ctx->mmu_lock); + mutex_unlock(&hdev->mmu_lock); put_ctx: /* diff --git a/drivers/misc/habanalabs/common/sysfs.c b/drivers/misc/habanalabs/common/sysfs.c index 6c5271f01160..36e9814139d1 100644 --- a/drivers/misc/habanalabs/common/sysfs.c +++ b/drivers/misc/habanalabs/common/sysfs.c @@ -375,6 +375,14 @@ out: return max_size; } +static ssize_t security_enabled_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct hl_device *hdev = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", hdev->asic_prop.fw_security_enabled); +} + static DEVICE_ATTR_RO(armcp_kernel_ver); static DEVICE_ATTR_RO(armcp_ver); static DEVICE_ATTR_RO(cpld_ver); @@ -393,6 +401,7 @@ static DEVICE_ATTR_RO(status); static DEVICE_ATTR_RO(thermal_ver); static DEVICE_ATTR_RO(uboot_ver); static DEVICE_ATTR_RO(fw_os_ver); +static DEVICE_ATTR_RO(security_enabled); static struct bin_attribute bin_attr_eeprom = { .attr = {.name = "eeprom", .mode = (0444)}, @@ -417,6 +426,7 @@ static struct attribute *hl_dev_attrs[] = { &dev_attr_thermal_ver.attr, &dev_attr_uboot_ver.attr, &dev_attr_fw_os_ver.attr, + &dev_attr_security_enabled.attr, NULL, }; diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c index cb2988e2c7a8..92560414e843 100644 --- a/drivers/misc/habanalabs/gaudi/gaudi.c +++ b/drivers/misc/habanalabs/gaudi/gaudi.c @@ -899,12 +899,13 @@ static int gaudi_early_fini(struct hl_device *hdev) */ static int gaudi_fetch_psoc_frequency(struct hl_device *hdev) { - struct asic_fixed_properties *prop = &hdev->asic_prop; u32 nr = 0, nf = 0, od = 0, div_fctr = 0, pll_clk, div_sel; + struct asic_fixed_properties *prop = &hdev->asic_prop; u16 pll_freq_arr[HL_PLL_NUM_OUTPUTS], freq; int rc; - if (hdev->asic_prop.fw_security_enabled) { + if ((hdev->fw_components & FW_TYPE_LINUX) && + (prop->fw_app_cpu_boot_dev_sts0 & CPU_BOOT_DEV_STS0_PLL_INFO_EN)) { struct gaudi_device *gaudi = hdev->asic_specific; if (!(gaudi->hw_cap_initialized & HW_CAP_CPU_Q)) @@ -939,9 +940,7 @@ static int gaudi_fetch_psoc_frequency(struct hl_device *hdev) else freq = pll_clk / (div_fctr + 1); } else { - dev_warn(hdev->dev, - "Received invalid div select value: %d", - div_sel); + dev_warn(hdev->dev, "Received invalid div select value: %#x", div_sel); freq = 0; } } @@ -985,9 +984,10 @@ static int _gaudi_init_tpc_mem(struct hl_device *hdev, init_tpc_mem_pkt->ctl = cpu_to_le32(ctl); init_tpc_mem_pkt->src_addr = cpu_to_le64(tpc_kernel_src_addr); - dst_addr = (prop->sram_user_base_address & - GAUDI_PKT_LIN_DMA_DST_ADDR_MASK) >> - GAUDI_PKT_LIN_DMA_DST_ADDR_SHIFT; + + /* TPC_CMD is configured with I$ prefetch enabled, so address should be aligned to 8KB */ + dst_addr = FIELD_PREP(GAUDI_PKT_LIN_DMA_DST_ADDR_MASK, + round_up(prop->sram_user_base_address, SZ_8K)); init_tpc_mem_pkt->dst_addr |= cpu_to_le64(dst_addr); job = hl_cs_allocate_job(hdev, QUEUE_TYPE_EXT, true); @@ -1683,23 +1683,7 @@ disable_pci_access: static void gaudi_late_fini(struct hl_device *hdev) { - const struct hwmon_channel_info **channel_info_arr; - int i = 0; - - if (!hdev->hl_chip_info->info) - return; - - channel_info_arr = hdev->hl_chip_info->info; - - while (channel_info_arr[i]) { - kfree(channel_info_arr[i]->config); - kfree(channel_info_arr[i]); - i++; - } - - kfree(channel_info_arr); - - hdev->hl_chip_info->info = NULL; + hl_hwmon_release_resources(hdev); } static int gaudi_alloc_cpu_accessible_dma_mem(struct hl_device *hdev) @@ -4723,7 +4707,7 @@ static int gaudi_scrub_device_mem(struct hl_device *hdev) addr = prop->sram_user_base_address; size = hdev->pldm ? 0x10000 : prop->sram_size - SRAM_USER_BASE_OFFSET; - dev_dbg(hdev->dev, "Scrubing SRAM: 0x%09llx - 0x%09llx val: 0x%llx\n", + dev_dbg(hdev->dev, "Scrubbing SRAM: 0x%09llx - 0x%09llx val: 0x%llx\n", addr, addr + size, val); rc = gaudi_memset_device_memory(hdev, addr, size, val); if (rc) { @@ -6911,9 +6895,9 @@ static void gaudi_handle_sw_config_stream_data(struct hl_device *hdev, u32 strea stream, cq_ptr, size); if (event_mask & HL_NOTIFIER_EVENT_UNDEFINED_OPCODE) { - hdev->last_error.undef_opcode.cq_addr = cq_ptr; - hdev->last_error.undef_opcode.cq_size = size; - hdev->last_error.undef_opcode.stream_id = stream; + hdev->captured_err_info.undef_opcode.cq_addr = cq_ptr; + hdev->captured_err_info.undef_opcode.cq_size = size; + hdev->captured_err_info.undef_opcode.stream_id = stream; } } @@ -6979,7 +6963,7 @@ static void gaudi_handle_last_pqes_on_err(struct hl_device *hdev, u32 qid_base, } if (event_mask & HL_NOTIFIER_EVENT_UNDEFINED_OPCODE) { - struct undefined_opcode_info *undef_opcode = &hdev->last_error.undef_opcode; + struct undefined_opcode_info *undef_opcode = &hdev->captured_err_info.undef_opcode; u32 arr_idx = undef_opcode->cb_addr_streams_len; if (arr_idx == 0) { @@ -7063,11 +7047,11 @@ static void gaudi_handle_qman_err_generic(struct hl_device *hdev, } /* check for undefined opcode */ if (glbl_sts_val & TPC0_QM_GLBL_STS1_CP_UNDEF_CMD_ERR_MASK && - hdev->last_error.undef_opcode.write_enable) { - memset(&hdev->last_error.undef_opcode, 0, - sizeof(hdev->last_error.undef_opcode)); + hdev->captured_err_info.undef_opcode.write_enable) { + memset(&hdev->captured_err_info.undef_opcode, 0, + sizeof(hdev->captured_err_info.undef_opcode)); - hdev->last_error.undef_opcode.write_enable = false; + hdev->captured_err_info.undef_opcode.write_enable = false; *event_mask |= HL_NOTIFIER_EVENT_UNDEFINED_OPCODE; } @@ -7233,12 +7217,6 @@ static void gaudi_handle_qman_err(struct hl_device *hdev, u16 event_type, u64 *e switch (event_type) { case GAUDI_EVENT_TPC0_QM ... GAUDI_EVENT_TPC7_QM: - /* In TPC QM event, notify on TPC assertion. While there isn't - * a specific event for assertion yet, the FW generates QM event. - * The SW upper layer will inspect an internal mapped area to indicate - * if the event is a tpc assertion or tpc QM. - */ - *event_mask |= HL_NOTIFIER_EVENT_TPC_ASSERT; index = event_type - GAUDI_EVENT_TPC0_QM; qid_base = GAUDI_QUEUE_ID_TPC_0_0 + index * QMAN_STREAMS; qman_base = mmTPC0_QM_BASE + index * TPC_QMAN_OFFSET; @@ -7349,18 +7327,19 @@ static void gaudi_print_irq_info(struct hl_device *hdev, u16 event_type, gaudi_print_and_get_mmu_error_info(hdev, &razwi_addr, &razwi_type); /* In case it's the first razwi, save its parameters*/ - rc = atomic_cmpxchg(&hdev->last_error.razwi.write_enable, 1, 0); + rc = atomic_cmpxchg(&hdev->captured_err_info.razwi.write_enable, 1, 0); if (rc) { - hdev->last_error.razwi.timestamp = ktime_get(); - hdev->last_error.razwi.addr = razwi_addr; - hdev->last_error.razwi.engine_id_1 = engine_id_1; - hdev->last_error.razwi.engine_id_2 = engine_id_2; + hdev->captured_err_info.razwi.timestamp = ktime_get(); + hdev->captured_err_info.razwi.addr = razwi_addr; + hdev->captured_err_info.razwi.engine_id_1 = engine_id_1; + hdev->captured_err_info.razwi.engine_id_2 = engine_id_2; /* * If first engine id holds non valid value the razwi initiator * does not have engine id */ - hdev->last_error.razwi.non_engine_initiator = (engine_id_1 == U16_MAX); - hdev->last_error.razwi.type = razwi_type; + hdev->captured_err_info.razwi.non_engine_initiator = + (engine_id_1 == U16_MAX); + hdev->captured_err_info.razwi.type = razwi_type; } } @@ -7427,7 +7406,7 @@ static void gaudi_print_nic_axi_irq_info(struct hl_device *hdev, u16 event_type, event_type, desc); } -static int gaudi_non_hard_reset_late_init(struct hl_device *hdev) +static int gaudi_compute_reset_late_init(struct hl_device *hdev) { /* GAUDI doesn't support any reset except hard-reset */ return -EPERM; @@ -7702,6 +7681,7 @@ static void gaudi_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entr case GAUDI_EVENT_NIC0_CS_DBG_DERR ... GAUDI_EVENT_NIC4_CS_DBG_DERR: gaudi_print_irq_info(hdev, event_type, true); gaudi_handle_ecc_event(hdev, event_type, &eq_entry->ecc_data); + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; fw_fatal_err_flag = HL_DRV_RESET_FW_FATAL_ERR; goto reset_device; @@ -7711,6 +7691,7 @@ static void gaudi_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entr case GAUDI_EVENT_PLL0 ... GAUDI_EVENT_PLL17: gaudi_print_irq_info(hdev, event_type, false); fw_fatal_err_flag = HL_DRV_RESET_FW_FATAL_ERR; + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; goto reset_device; case GAUDI_EVENT_HBM0_SPI_0: @@ -7722,6 +7703,7 @@ static void gaudi_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entr gaudi_hbm_event_to_dev(event_type), &eq_entry->hbm_ecc_data); fw_fatal_err_flag = HL_DRV_RESET_FW_FATAL_ERR; + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; goto reset_device; case GAUDI_EVENT_HBM0_SPI_1: @@ -7733,6 +7715,7 @@ static void gaudi_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entr gaudi_hbm_event_to_dev(event_type), &eq_entry->hbm_ecc_data); hl_fw_unmask_irq(hdev, event_type); + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; break; case GAUDI_EVENT_TPC0_DEC: @@ -7743,10 +7726,17 @@ static void gaudi_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entr case GAUDI_EVENT_TPC5_DEC: case GAUDI_EVENT_TPC6_DEC: case GAUDI_EVENT_TPC7_DEC: + /* In TPC DEC event, notify on TPC assertion. While there isn't + * a specific event for assertion yet, the FW generates TPC DEC event. + * The SW upper layer will inspect an internal mapped area to indicate + * if the event is a TPC Assertion or a "real" TPC DEC. + */ + event_mask |= HL_NOTIFIER_EVENT_TPC_ASSERT; gaudi_print_irq_info(hdev, event_type, true); reset_required = gaudi_tpc_read_interrupts(hdev, tpc_dec_event_to_tpc_id(event_type), "AXI_SLV_DEC_Error"); + event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR; if (reset_required) { dev_err(hdev->dev, "reset required due to %s\n", gaudi_irq_map_table[event_type].name); @@ -7755,6 +7745,7 @@ static void gaudi_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entr goto reset_device; } else { hl_fw_unmask_irq(hdev, event_type); + event_mask |= HL_NOTIFIER_EVENT_DEVICE_RESET; } break; @@ -7770,6 +7761,7 @@ static void gaudi_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entr reset_required = gaudi_tpc_read_interrupts(hdev, tpc_krn_event_to_tpc_id(event_type), "KRN_ERR"); + event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR; if (reset_required) { dev_err(hdev->dev, "reset required due to %s\n", gaudi_irq_map_table[event_type].name); @@ -7778,6 +7770,7 @@ static void gaudi_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entr goto reset_device; } else { hl_fw_unmask_irq(hdev, event_type); + event_mask |= HL_NOTIFIER_EVENT_DEVICE_RESET; } break; @@ -7806,9 +7799,25 @@ static void gaudi_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entr gaudi_print_irq_info(hdev, event_type, true); gaudi_handle_ecc_event(hdev, event_type, &eq_entry->ecc_data); hl_fw_unmask_irq(hdev, event_type); + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; break; case GAUDI_EVENT_PCIE_DEC: + case GAUDI_EVENT_CPU_AXI_SPLITTER: + case GAUDI_EVENT_PSOC_AXI_DEC: + case GAUDI_EVENT_PSOC_PRSTN_FALL: + gaudi_print_irq_info(hdev, event_type, true); + hl_fw_unmask_irq(hdev, event_type); + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; + break; + + case GAUDI_EVENT_MMU_PAGE_FAULT: + case GAUDI_EVENT_MMU_WR_PERM: + gaudi_print_irq_info(hdev, event_type, true); + hl_fw_unmask_irq(hdev, event_type); + event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR; + break; + case GAUDI_EVENT_MME0_WBC_RSP: case GAUDI_EVENT_MME0_SBAB0_RSP: case GAUDI_EVENT_MME1_WBC_RSP: @@ -7817,11 +7826,6 @@ static void gaudi_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entr case GAUDI_EVENT_MME2_SBAB0_RSP: case GAUDI_EVENT_MME3_WBC_RSP: case GAUDI_EVENT_MME3_SBAB0_RSP: - case GAUDI_EVENT_CPU_AXI_SPLITTER: - case GAUDI_EVENT_PSOC_AXI_DEC: - case GAUDI_EVENT_PSOC_PRSTN_FALL: - case GAUDI_EVENT_MMU_PAGE_FAULT: - case GAUDI_EVENT_MMU_WR_PERM: case GAUDI_EVENT_RAZWI_OR_ADC: case GAUDI_EVENT_MME0_QM ... GAUDI_EVENT_MME2_QM: case GAUDI_EVENT_DMA0_QM ... GAUDI_EVENT_DMA7_QM: @@ -7841,10 +7845,12 @@ static void gaudi_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entr gaudi_print_irq_info(hdev, event_type, true); gaudi_handle_qman_err(hdev, event_type, &event_mask); hl_fw_unmask_irq(hdev, event_type); + event_mask |= (HL_NOTIFIER_EVENT_USER_ENGINE_ERR | HL_NOTIFIER_EVENT_DEVICE_RESET); break; case GAUDI_EVENT_RAZWI_OR_ADC_SW: gaudi_print_irq_info(hdev, event_type, true); + event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR; goto reset_device; case GAUDI_EVENT_TPC0_BMON_SPMU: @@ -7858,11 +7864,13 @@ static void gaudi_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entr case GAUDI_EVENT_DMA_BM_CH0 ... GAUDI_EVENT_DMA_BM_CH7: gaudi_print_irq_info(hdev, event_type, false); hl_fw_unmask_irq(hdev, event_type); + event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR; break; case GAUDI_EVENT_NIC_SEI_0 ... GAUDI_EVENT_NIC_SEI_4: gaudi_print_nic_axi_irq_info(hdev, event_type, &data); hl_fw_unmask_irq(hdev, event_type); + event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR; break; case GAUDI_EVENT_DMA_IF_SEI_0 ... GAUDI_EVENT_DMA_IF_SEI_3: @@ -7870,6 +7878,7 @@ static void gaudi_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entr gaudi_print_sm_sei_info(hdev, event_type, &eq_entry->sm_sei_data); rc = hl_state_dump(hdev); + event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR; if (rc) dev_err(hdev->dev, "Error during system state dump %d\n", rc); @@ -7880,6 +7889,7 @@ static void gaudi_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entr break; case GAUDI_EVENT_FIX_POWER_ENV_S ... GAUDI_EVENT_FIX_THERMAL_ENV_E: + event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR; gaudi_print_clk_change_info(hdev, event_type); hl_fw_unmask_irq(hdev, event_type); break; @@ -7889,20 +7899,24 @@ static void gaudi_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entr dev_err(hdev->dev, "Received high temp H/W interrupt %d (cause %d)\n", event_type, cause); + event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR; break; case GAUDI_EVENT_DEV_RESET_REQ: gaudi_print_irq_info(hdev, event_type, false); + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; goto reset_device; case GAUDI_EVENT_PKT_QUEUE_OUT_SYNC: gaudi_print_irq_info(hdev, event_type, false); gaudi_print_out_of_sync_info(hdev, &eq_entry->pkt_sync_err); + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; goto reset_device; case GAUDI_EVENT_FW_ALIVE_S: gaudi_print_irq_info(hdev, event_type, false); gaudi_print_fw_alive_info(hdev, &eq_entry->fw_alive); + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; goto reset_device; default: @@ -8066,8 +8080,8 @@ static int gaudi_cpucp_info_get(struct hl_device *hdev) return 0; } -static bool gaudi_is_device_idle(struct hl_device *hdev, u64 *mask_arr, - u8 mask_len, struct seq_file *s) +static bool gaudi_is_device_idle(struct hl_device *hdev, u64 *mask_arr, u8 mask_len, + struct engines_data *e) { struct gaudi_device *gaudi = hdev->asic_specific; const char *fmt = "%-5d%-9s%#-14x%#-12x%#x\n"; @@ -8079,8 +8093,8 @@ static bool gaudi_is_device_idle(struct hl_device *hdev, u64 *mask_arr, u64 offset; int i, dma_id, port; - if (s) - seq_puts(s, + if (e) + hl_engine_data_sprintf(e, "\nDMA is_idle QM_GLBL_STS0 QM_CGM_STS DMA_CORE_STS0\n" "--- ------- ------------ ---------- -------------\n"); @@ -8097,14 +8111,14 @@ static bool gaudi_is_device_idle(struct hl_device *hdev, u64 *mask_arr, if (mask && !is_eng_idle) set_bit(GAUDI_ENGINE_ID_DMA_0 + dma_id, mask); - if (s) - seq_printf(s, fmt, dma_id, + if (e) + hl_engine_data_sprintf(e, fmt, dma_id, is_eng_idle ? "Y" : "N", qm_glbl_sts0, qm_cgm_sts, dma_core_sts0); } - if (s) - seq_puts(s, + if (e) + hl_engine_data_sprintf(e, "\nTPC is_idle QM_GLBL_STS0 QM_CGM_STS CFG_STATUS\n" "--- ------- ------------ ---------- ----------\n"); @@ -8119,14 +8133,14 @@ static bool gaudi_is_device_idle(struct hl_device *hdev, u64 *mask_arr, if (mask && !is_eng_idle) set_bit(GAUDI_ENGINE_ID_TPC_0 + i, mask); - if (s) - seq_printf(s, fmt, i, + if (e) + hl_engine_data_sprintf(e, fmt, i, is_eng_idle ? "Y" : "N", qm_glbl_sts0, qm_cgm_sts, tpc_cfg_sts); } - if (s) - seq_puts(s, + if (e) + hl_engine_data_sprintf(e, "\nMME is_idle QM_GLBL_STS0 QM_CGM_STS ARCH_STATUS\n" "--- ------- ------------ ---------- -----------\n"); @@ -8147,20 +8161,21 @@ static bool gaudi_is_device_idle(struct hl_device *hdev, u64 *mask_arr, if (mask && !is_eng_idle) set_bit(GAUDI_ENGINE_ID_MME_0 + i, mask); - if (s) { + if (e) { if (!is_slave) - seq_printf(s, fmt, i, + hl_engine_data_sprintf(e, fmt, i, is_eng_idle ? "Y" : "N", qm_glbl_sts0, qm_cgm_sts, mme_arch_sts); else - seq_printf(s, mme_slave_fmt, i, + hl_engine_data_sprintf(e, mme_slave_fmt, i, is_eng_idle ? "Y" : "N", "-", "-", mme_arch_sts); } } - if (s) - seq_puts(s, "\nNIC is_idle QM_GLBL_STS0 QM_CGM_STS\n" + if (e) + hl_engine_data_sprintf(e, + "\nNIC is_idle QM_GLBL_STS0 QM_CGM_STS\n" "--- ------- ------------ ----------\n"); for (i = 0 ; i < (NIC_NUMBER_OF_ENGINES / 2) ; i++) { @@ -8174,8 +8189,8 @@ static bool gaudi_is_device_idle(struct hl_device *hdev, u64 *mask_arr, if (mask && !is_eng_idle) set_bit(GAUDI_ENGINE_ID_NIC_0 + port, mask); - if (s) - seq_printf(s, nic_fmt, port, + if (e) + hl_engine_data_sprintf(e, nic_fmt, port, is_eng_idle ? "Y" : "N", qm_glbl_sts0, qm_cgm_sts); } @@ -8189,15 +8204,15 @@ static bool gaudi_is_device_idle(struct hl_device *hdev, u64 *mask_arr, if (mask && !is_eng_idle) set_bit(GAUDI_ENGINE_ID_NIC_0 + port, mask); - if (s) - seq_printf(s, nic_fmt, port, + if (e) + hl_engine_data_sprintf(e, nic_fmt, port, is_eng_idle ? "Y" : "N", qm_glbl_sts0, qm_cgm_sts); } } - if (s) - seq_puts(s, "\n"); + if (e) + hl_engine_data_sprintf(e, "\n"); return is_idle; } @@ -8392,13 +8407,13 @@ static int gaudi_internal_cb_pool_init(struct hl_device *hdev, goto destroy_internal_cb_pool; } - mutex_lock(&ctx->mmu_lock); + mutex_lock(&hdev->mmu_lock); rc = hl_mmu_map_contiguous(ctx, hdev->internal_cb_va_base, hdev->internal_cb_pool_dma_addr, HOST_SPACE_INTERNAL_CB_SZ); hl_mmu_invalidate_cache(hdev, false, MMU_OP_USERPTR); - mutex_unlock(&ctx->mmu_lock); + mutex_unlock(&hdev->mmu_lock); if (rc) goto unreserve_internal_cb_pool; @@ -8425,13 +8440,13 @@ static void gaudi_internal_cb_pool_fini(struct hl_device *hdev, if (!(gaudi->hw_cap_initialized & HW_CAP_MMU)) return; - mutex_lock(&ctx->mmu_lock); + mutex_lock(&hdev->mmu_lock); hl_mmu_unmap_contiguous(ctx, hdev->internal_cb_va_base, HOST_SPACE_INTERNAL_CB_SZ); hl_unreserve_va_block(hdev, ctx, hdev->internal_cb_va_base, HOST_SPACE_INTERNAL_CB_SZ); hl_mmu_invalidate_cache(hdev, true, MMU_OP_USERPTR); - mutex_unlock(&ctx->mmu_lock); + mutex_unlock(&hdev->mmu_lock); gen_pool_destroy(hdev->internal_cb_pool); @@ -9148,6 +9163,11 @@ static void gaudi_add_device_attr(struct hl_device *hdev, struct attribute_group dev_vrm_attr_grp->attrs = gaudi_vrm_dev_attrs; } +static int gaudi_send_device_activity(struct hl_device *hdev, bool open) +{ + return 0; +} + static const struct hl_asic_funcs gaudi_funcs = { .early_init = gaudi_early_init, .early_fini = gaudi_early_fini, @@ -9192,11 +9212,9 @@ static const struct hl_asic_funcs gaudi_funcs = { .send_heartbeat = gaudi_send_heartbeat, .debug_coresight = gaudi_debug_coresight, .is_device_idle = gaudi_is_device_idle, - .non_hard_reset_late_init = gaudi_non_hard_reset_late_init, + .compute_reset_late_init = gaudi_compute_reset_late_init, .hw_queues_lock = gaudi_hw_queues_lock, .hw_queues_unlock = gaudi_hw_queues_unlock, - .kdma_lock = NULL, - .kdma_unlock = NULL, .get_pci_id = gaudi_get_pci_id, .get_eeprom_data = gaudi_get_eeprom_data, .get_monitor_dump = gaudi_get_monitor_dump, @@ -9242,6 +9260,7 @@ static const struct hl_asic_funcs gaudi_funcs = { .mmu_get_real_page_size = hl_mmu_get_real_page_size, .access_dev_mem = hl_access_dev_mem, .set_dram_bar_base = gaudi_set_hbm_bar_base, + .send_device_activity = gaudi_send_device_activity, }; /** diff --git a/drivers/misc/habanalabs/gaudi2/gaudi2.c b/drivers/misc/habanalabs/gaudi2/gaudi2.c index 98336a1a84b0..75c4bef7841c 100644 --- a/drivers/misc/habanalabs/gaudi2/gaudi2.c +++ b/drivers/misc/habanalabs/gaudi2/gaudi2.c @@ -21,7 +21,7 @@ #define GAUDI2_DMA_POOL_BLK_SIZE SZ_256 /* 256 bytes */ -#define GAUDI2_RESET_TIMEOUT_MSEC 500 /* 500ms */ +#define GAUDI2_RESET_TIMEOUT_MSEC 2000 /* 2000ms */ #define GAUDI2_RESET_POLL_TIMEOUT_USEC 50000 /* 50ms */ #define GAUDI2_PLDM_HRESET_TIMEOUT_MSEC 25000 /* 25s */ #define GAUDI2_PLDM_SRESET_TIMEOUT_MSEC 25000 /* 25s */ @@ -117,6 +117,12 @@ #define MMU_RANGE_INV_ASID_EN_SHIFT 1 #define MMU_RANGE_INV_ASID_SHIFT 2 +/* The last SPI_SEI cause bit, "burst_fifo_full", is expected to be triggered in PMMU because it has + * a 2 entries FIFO, and hence it is not enabled for it. + */ +#define GAUDI2_PMMU_SPI_SEI_ENABLE_MASK GENMASK(GAUDI2_NUM_OF_MMU_SPI_SEI_CAUSE - 2, 0) +#define GAUDI2_HMMU_SPI_SEI_ENABLE_MASK GENMASK(GAUDI2_NUM_OF_MMU_SPI_SEI_CAUSE - 1, 0) + #define GAUDI2_MAX_STRING_LEN 64 #define GAUDI2_VDEC_MSIX_ENTRIES (GAUDI2_IRQ_NUM_SHARED_DEC1_ABNRM - \ @@ -610,7 +616,7 @@ static const char * const guadi2_mme_error_cause[GAUDI2_NUM_OF_MME_ERR_CAUSE] = "qman_axi_err", "wap sei (wbc axi err)", "arc sei", - "mme_cfg_unalign_addr", + "cfg access error", "qm_sw_err", "sbte_dbg_intr_0", "sbte_dbg_intr_1", @@ -1525,17 +1531,57 @@ static const u32 rtr_coordinates_to_rtr_id[NUM_OF_RTR_PER_DCORE * NUM_OF_DCORES] RTR_ID_X_Y(17, 11) }; +enum rtr_id { + DCORE0_RTR0, + DCORE0_RTR1, + DCORE0_RTR2, + DCORE0_RTR3, + DCORE0_RTR4, + DCORE0_RTR5, + DCORE0_RTR6, + DCORE0_RTR7, + DCORE1_RTR0, + DCORE1_RTR1, + DCORE1_RTR2, + DCORE1_RTR3, + DCORE1_RTR4, + DCORE1_RTR5, + DCORE1_RTR6, + DCORE1_RTR7, + DCORE2_RTR0, + DCORE2_RTR1, + DCORE2_RTR2, + DCORE2_RTR3, + DCORE2_RTR4, + DCORE2_RTR5, + DCORE2_RTR6, + DCORE2_RTR7, + DCORE3_RTR0, + DCORE3_RTR1, + DCORE3_RTR2, + DCORE3_RTR3, + DCORE3_RTR4, + DCORE3_RTR5, + DCORE3_RTR6, + DCORE3_RTR7, +}; + static const u32 gaudi2_tpc_initiator_rtr_id[NUM_OF_TPC_PER_DCORE * NUM_OF_DCORES + 1] = { - 1, 1, 2, 2, 3, 3, 14, 14, 13, 13, 12, 12, 19, 19, 18, 18, 17, - 17, 28, 28, 29, 29, 30, 30, 0 + DCORE0_RTR1, DCORE0_RTR1, DCORE0_RTR2, DCORE0_RTR2, DCORE0_RTR3, DCORE0_RTR3, + DCORE1_RTR6, DCORE1_RTR6, DCORE1_RTR5, DCORE1_RTR5, DCORE1_RTR4, DCORE1_RTR4, + DCORE2_RTR3, DCORE2_RTR3, DCORE2_RTR2, DCORE2_RTR2, DCORE2_RTR1, DCORE2_RTR1, + DCORE3_RTR4, DCORE3_RTR4, DCORE3_RTR5, DCORE3_RTR5, DCORE3_RTR6, DCORE3_RTR6, + DCORE0_RTR0 }; static const u32 gaudi2_dec_initiator_rtr_id[NUMBER_OF_DEC] = { - 0, 0, 15, 15, 16, 16, 31, 31, 0, 0 + DCORE0_RTR0, DCORE0_RTR0, DCORE1_RTR7, DCORE1_RTR7, DCORE2_RTR0, DCORE2_RTR0, + DCORE3_RTR7, DCORE3_RTR7, DCORE0_RTR0, DCORE0_RTR0 }; static const u32 gaudi2_nic_initiator_rtr_id[NIC_NUMBER_OF_MACROS] = { - 15, 15, 15, 15, 15, 16, 16, 16, 16, 31, 31, 31 + DCORE1_RTR7, DCORE1_RTR7, DCORE1_RTR7, DCORE1_RTR7, DCORE1_RTR7, DCORE2_RTR0, + DCORE2_RTR0, DCORE2_RTR0, DCORE2_RTR0, DCORE3_RTR7, DCORE3_RTR7, DCORE3_RTR7 }; struct sft_info { @@ -1548,11 +1594,11 @@ static const struct sft_info gaudi2_edma_initiator_sft_id[NUM_OF_EDMA_PER_DCORE }; static const u32 gaudi2_pdma_initiator_rtr_id[NUM_OF_PDMA] = { - 0, 0 + DCORE0_RTR0, DCORE0_RTR0 }; static const u32 gaudi2_rot_initiator_rtr_id[NUM_OF_ROT] = { - 16, 31 + DCORE2_RTR0, DCORE3_RTR7 }; struct mme_initiators_rtr_id { @@ -1663,7 +1709,7 @@ struct gaudi2_cache_invld_params { }; struct gaudi2_tpc_idle_data { - struct seq_file *s; + struct engines_data *e; unsigned long *mask; bool *is_idle; const char *tpc_fmt; @@ -1706,6 +1752,9 @@ void gaudi2_iterate_tpcs(struct hl_device *hdev, struct iterate_module_ctx *ctx) int dcore, inst, tpc_seq; u32 offset; + /* init the return code */ + ctx->rc = 0; + for (dcore = 0; dcore < NUM_OF_DCORES; dcore++) { for (inst = 0; inst < NUM_OF_TPC_PER_DCORE; inst++) { tpc_seq = dcore * NUM_OF_TPC_PER_DCORE + inst; @@ -1715,7 +1764,12 @@ void gaudi2_iterate_tpcs(struct hl_device *hdev, struct iterate_module_ctx *ctx) offset = (DCORE_OFFSET * dcore) + (DCORE_TPC_OFFSET * inst); - ctx->fn(hdev, dcore, inst, offset, ctx->data); + ctx->fn(hdev, dcore, inst, offset, ctx); + if (ctx->rc) { + dev_err(hdev->dev, "TPC iterator failed for DCORE%d TPC%d\n", + dcore, inst); + return; + } } } @@ -1724,7 +1778,9 @@ void gaudi2_iterate_tpcs(struct hl_device *hdev, struct iterate_module_ctx *ctx) /* special check for PCI TPC (DCORE0_TPC6) */ offset = DCORE_TPC_OFFSET * (NUM_DCORE0_TPC - 1); - ctx->fn(hdev, 0, NUM_DCORE0_TPC - 1, offset, ctx->data); + ctx->fn(hdev, 0, NUM_DCORE0_TPC - 1, offset, ctx); + if (ctx->rc) + dev_err(hdev->dev, "TPC iterator failed for DCORE0 TPC6\n"); } static bool gaudi2_host_phys_addr_valid(u64 addr) @@ -1973,6 +2029,7 @@ static int gaudi2_set_fixed_properties(struct hl_device *hdev) prop->pmmu_huge.end_addr = VA_HOST_SPACE_HPAGE_END; } + prop->num_engine_cores = CPU_ID_MAX; prop->cfg_size = CFG_SIZE; prop->max_asid = MAX_ASID; prop->num_of_events = GAUDI2_EVENT_SIZE; @@ -2005,9 +2062,6 @@ static int gaudi2_set_fixed_properties(struct hl_device *hdev) prop->server_type = HL_SERVER_TYPE_UNKNOWN; - prop->cb_va_start_addr = VA_HOST_SPACE_USER_MAPPED_CB_START; - prop->cb_va_end_addr = VA_HOST_SPACE_USER_MAPPED_CB_END; - prop->max_dec = NUMBER_OF_DEC; prop->clk_pll_index = HL_GAUDI2_MME_PLL; @@ -2477,7 +2531,6 @@ static int gaudi2_early_init(struct hl_device *hdev) struct asic_fixed_properties *prop = &hdev->asic_prop; struct pci_dev *pdev = hdev->pdev; resource_size_t pci_bar_size; - u32 fw_boot_status; int rc; rc = gaudi2_set_fixed_properties(hdev); @@ -2505,22 +2558,14 @@ static int gaudi2_early_init(struct hl_device *hdev) prop->dram_pci_bar_size = pci_resource_len(pdev, DRAM_BAR_ID); hdev->dram_pci_bar_start = pci_resource_start(pdev, DRAM_BAR_ID); - /* If FW security is enabled at this point it means no access to ELBI */ - if (hdev->asic_prop.fw_security_enabled) { - hdev->asic_prop.iatu_done_by_fw = true; - goto pci_init; - } - - rc = hl_pci_elbi_read(hdev, CFG_BASE + mmCPU_BOOT_DEV_STS0, &fw_boot_status); - if (rc) - goto free_queue_props; - - /* Check whether FW is configuring iATU */ - if ((fw_boot_status & CPU_BOOT_DEV_STS0_ENABLED) && - (fw_boot_status & CPU_BOOT_DEV_STS0_FW_IATU_CONF_EN)) + /* + * Only in pldm driver config iATU + */ + if (hdev->pldm) + hdev->asic_prop.iatu_done_by_fw = false; + else hdev->asic_prop.iatu_done_by_fw = true; -pci_init: rc = hl_pci_init(hdev); if (rc) goto free_queue_props; @@ -2676,6 +2721,8 @@ static int gaudi2_late_init(struct hl_device *hdev) struct gaudi2_device *gaudi2 = hdev->asic_specific; int rc; + hdev->asic_prop.supports_advanced_cpucp_rc = true; + rc = hl_fw_send_pci_access_msg(hdev, CPUCP_PACKET_ENABLE_PCI_ACCESS, gaudi2->virt_msix_db_dma_addr); if (rc) { @@ -2703,23 +2750,7 @@ disable_pci_access: static void gaudi2_late_fini(struct hl_device *hdev) { - const struct hwmon_channel_info **channel_info_arr; - int i = 0; - - if (!hdev->hl_chip_info->info) - return; - - channel_info_arr = hdev->hl_chip_info->info; - - while (channel_info_arr[i]) { - kfree(channel_info_arr[i]->config); - kfree(channel_info_arr[i]); - i++; - } - - kfree(channel_info_arr); - - hdev->hl_chip_info->info = NULL; + hl_hwmon_release_resources(hdev); } static void gaudi2_user_mapped_dec_init(struct gaudi2_device *gaudi2, u32 start_idx) @@ -2994,7 +3025,6 @@ static int gaudi2_sw_init(struct hl_device *hdev) } spin_lock_init(&gaudi2->hw_queues_lock); - spin_lock_init(&gaudi2->kdma_lock); gaudi2->scratchpad_kernel_address = hl_asic_dma_alloc_coherent(hdev, PAGE_SIZE, &gaudi2->scratchpad_bus_address, @@ -3551,7 +3581,7 @@ static int gaudi2_enable_msix(struct hl_device *hdev) rc = gaudi2_dec_enable_msix(hdev); if (rc) { dev_err(hdev->dev, "Failed to enable decoder IRQ"); - goto free_completion_irq; + goto free_event_irq; } for (i = GAUDI2_IRQ_NUM_USER_FIRST, j = prop->user_dec_intr_count, user_irq_init_cnt = 0; @@ -3582,6 +3612,10 @@ free_user_irq: gaudi2_dec_disable_msix(hdev, GAUDI2_IRQ_NUM_SHARED_DEC1_ABNRM + 1); +free_event_irq: + irq = pci_irq_vector(hdev->pdev, GAUDI2_IRQ_NUM_EVENT_QUEUE); + free_irq(irq, cq); + free_completion_irq: irq = pci_irq_vector(hdev->pdev, GAUDI2_IRQ_NUM_COMPLETION); free_irq(irq, cq); @@ -3745,14 +3779,16 @@ static void gaudi2_stop_dec(struct hl_device *hdev) gaudi2_stop_pcie_dec(hdev); } -static void gaudi2_halt_arc(struct hl_device *hdev, u32 cpu_id) +static void gaudi2_set_arc_running_mode(struct hl_device *hdev, u32 cpu_id, u32 run_mode) { u32 reg_base, reg_val; reg_base = gaudi2_arc_blocks_bases[cpu_id]; + if (run_mode == HL_ENGINE_CORE_RUN) + reg_val = FIELD_PREP(ARC_FARM_ARC0_AUX_RUN_HALT_REQ_RUN_REQ_MASK, 1); + else + reg_val = FIELD_PREP(ARC_FARM_ARC0_AUX_RUN_HALT_REQ_HALT_REQ_MASK, 1); - /* Halt ARC */ - reg_val = FIELD_PREP(ARC_FARM_ARC0_AUX_RUN_HALT_REQ_HALT_REQ_MASK, 1); WREG32(reg_base + ARC_HALT_REQ_OFFSET, reg_val); } @@ -3762,8 +3798,35 @@ static void gaudi2_halt_arcs(struct hl_device *hdev) for (arc_id = CPU_ID_SCHED_ARC0; arc_id < CPU_ID_MAX; arc_id++) { if (gaudi2_is_arc_enabled(hdev, arc_id)) - gaudi2_halt_arc(hdev, arc_id); + gaudi2_set_arc_running_mode(hdev, arc_id, HL_ENGINE_CORE_HALT); + } +} + +static int gaudi2_verify_arc_running_mode(struct hl_device *hdev, u32 cpu_id, u32 run_mode) +{ + int rc; + u32 reg_base, val, ack_mask, timeout_usec = 100000; + + if (hdev->pldm) + timeout_usec *= 100; + + reg_base = gaudi2_arc_blocks_bases[cpu_id]; + if (run_mode == HL_ENGINE_CORE_RUN) + ack_mask = ARC_FARM_ARC0_AUX_RUN_HALT_ACK_RUN_ACK_MASK; + else + ack_mask = ARC_FARM_ARC0_AUX_RUN_HALT_ACK_HALT_ACK_MASK; + + rc = hl_poll_timeout(hdev, reg_base + ARC_HALT_ACK_OFFSET, + val, ((val & ack_mask) == ack_mask), + 1000, timeout_usec); + + if (!rc) { + /* Clear */ + val = FIELD_PREP(ARC_FARM_ARC0_AUX_RUN_HALT_REQ_RUN_REQ_MASK, 0); + WREG32(reg_base + ARC_HALT_REQ_OFFSET, val); } + + return rc; } static void gaudi2_reset_arcs(struct hl_device *hdev) @@ -3790,8 +3853,39 @@ static void gaudi2_nic_qmans_manual_flush(struct hl_device *hdev) queue_id = GAUDI2_QUEUE_ID_NIC_0_0; - for (i = 0 ; i < NIC_NUMBER_OF_ENGINES ; i++, queue_id += NUM_OF_PQ_PER_QMAN) + for (i = 0 ; i < NIC_NUMBER_OF_ENGINES ; i++, queue_id += NUM_OF_PQ_PER_QMAN) { + if (!(hdev->nic_ports_mask & BIT(i))) + continue; + gaudi2_qman_manual_flush_common(hdev, queue_id); + } +} + +static int gaudi2_set_engine_cores(struct hl_device *hdev, u32 *core_ids, + u32 num_cores, u32 core_command) +{ + int i, rc; + + + for (i = 0 ; i < num_cores ; i++) { + if (gaudi2_is_arc_enabled(hdev, core_ids[i])) + gaudi2_set_arc_running_mode(hdev, core_ids[i], core_command); + } + + for (i = 0 ; i < num_cores ; i++) { + if (gaudi2_is_arc_enabled(hdev, core_ids[i])) { + rc = gaudi2_verify_arc_running_mode(hdev, core_ids[i], core_command); + + if (rc) { + dev_err(hdev->dev, "failed to %s arc: %d\n", + (core_command == HL_ENGINE_CORE_HALT) ? + "HALT" : "RUN", core_ids[i]); + return -1; + } + } + } + + return 0; } static void gaudi2_halt_engines(struct hl_device *hdev, bool hard_reset, bool fw_reset) @@ -4124,11 +4218,15 @@ static void gaudi2_init_qman_common(struct hl_device *hdev, u32 reg_base, WREG32(reg_base + QM_GLBL_CFG2_OFFSET, 0); /* Enable the QMAN channel. - * PDMA1 QMAN configuration is different, as we do not allow user to - * access CP2/3, it is reserved for the ARC usage. + * PDMA QMAN configuration is different, as we do not allow user to + * access some of the CPs. + * PDMA0: CP2/3 are reserved for the ARC usage. + * PDMA1: CP1/2/3 are reserved for the ARC usage. */ if (reg_base == gaudi2_qm_blocks_bases[GAUDI2_QUEUE_ID_PDMA_1_0]) WREG32(reg_base + QM_GLBL_CFG0_OFFSET, PDMA1_QMAN_ENABLE); + else if (reg_base == gaudi2_qm_blocks_bases[GAUDI2_QUEUE_ID_PDMA_0_0]) + WREG32(reg_base + QM_GLBL_CFG0_OFFSET, PDMA0_QMAN_ENABLE); else WREG32(reg_base + QM_GLBL_CFG0_OFFSET, QMAN_ENABLE); } @@ -4501,10 +4599,10 @@ struct gaudi2_tpc_init_cfg_data { }; static void gaudi2_init_tpc_config(struct hl_device *hdev, int dcore, int inst, - u32 offset, void *data) + u32 offset, struct iterate_module_ctx *ctx) { struct gaudi2_device *gaudi2 = hdev->asic_specific; - struct gaudi2_tpc_init_cfg_data *cfg_data = data; + struct gaudi2_tpc_init_cfg_data *cfg_data = ctx->data; u32 queue_id_base; u8 seq; @@ -4956,8 +5054,7 @@ static int gaudi2_mmu_update_hop0_addr(struct hl_device *hdev, u32 stlb_base) return 0; } -static int gaudi2_mmu_init_common(struct hl_device *hdev, u32 mmu_base, - u32 stlb_base) +static int gaudi2_mmu_init_common(struct hl_device *hdev, u32 mmu_base, u32 stlb_base) { u32 status, timeout_usec; int rc; @@ -4985,7 +5082,6 @@ static int gaudi2_mmu_init_common(struct hl_device *hdev, u32 mmu_base, return rc; WREG32(mmu_base + MMU_BYPASS_OFFSET, 0); - WREG32(mmu_base + MMU_SPI_SEI_MASK_OFFSET, 0xF); rc = hl_poll_timeout( hdev, @@ -5042,6 +5138,8 @@ static int gaudi2_pci_mmu_init(struct hl_device *hdev) DCORE0_HMMU0_MMU_STATIC_MULTI_PAGE_SIZE_CFG_8_BITS_HOP_MODE_EN_MASK); } + WREG32(mmu_base + MMU_SPI_SEI_MASK_OFFSET, GAUDI2_PMMU_SPI_SEI_ENABLE_MASK); + rc = gaudi2_mmu_init_common(hdev, mmu_base, stlb_base); if (rc) return rc; @@ -5092,6 +5190,8 @@ static int gaudi2_dcore_hmmu_init(struct hl_device *hdev, int dcore_id, RMWREG32(stlb_base + STLB_HOP_CONFIGURATION_OFFSET, 1, STLB_HOP_CONFIGURATION_ONLY_LARGE_PAGE_MASK); + WREG32(mmu_base + MMU_SPI_SEI_MASK_OFFSET, GAUDI2_HMMU_SPI_SEI_ENABLE_MASK); + rc = gaudi2_mmu_init_common(hdev, mmu_base, stlb_base); if (rc) return rc; @@ -5339,7 +5439,10 @@ static void gaudi2_execute_soft_reset(struct hl_device *hdev, u32 reset_sleep_ms if (!driver_performs_reset) { /* set SP to indicate reset request sent to FW */ - WREG32(mmCPU_RST_STATUS_TO_HOST, CPU_RST_STATUS_NA); + if (dyn_regs->cpu_rst_status) + WREG32(le32_to_cpu(dyn_regs->cpu_rst_status), CPU_RST_STATUS_NA); + else + WREG32(mmCPU_RST_STATUS_TO_HOST, CPU_RST_STATUS_NA); WREG32(le32_to_cpu(dyn_regs->gic_host_soft_rst_irq), gaudi2_irq_map_table[GAUDI2_EVENT_CPU_SOFT_RESET].cpu_id); @@ -5527,10 +5630,11 @@ static bool gaudi2_is_queue_enabled(struct hl_device *hdev, u32 hw_queue_id) u64 hw_test_cap_bit = 0; switch (hw_queue_id) { - case GAUDI2_QUEUE_ID_PDMA_0_0 ... GAUDI2_QUEUE_ID_PDMA_1_1: + case GAUDI2_QUEUE_ID_PDMA_0_0: + case GAUDI2_QUEUE_ID_PDMA_0_1: + case GAUDI2_QUEUE_ID_PDMA_1_0: hw_cap_mask = HW_CAP_PDMA_MASK; break; - case GAUDI2_QUEUE_ID_DCORE0_EDMA_0_0...GAUDI2_QUEUE_ID_DCORE0_EDMA_1_3: hw_test_cap_bit = HW_CAP_EDMA_SHIFT + ((hw_queue_id - GAUDI2_QUEUE_ID_DCORE0_EDMA_0_0) >> 2); @@ -6129,7 +6233,7 @@ done: return ret_val; } -static int gaudi2_non_hard_reset_late_init(struct hl_device *hdev) +static int gaudi2_compute_reset_late_init(struct hl_device *hdev) { struct gaudi2_device *gaudi2 = hdev->asic_specific; size_t irq_arr_size; @@ -6147,9 +6251,9 @@ static int gaudi2_non_hard_reset_late_init(struct hl_device *hdev) } static void gaudi2_is_tpc_engine_idle(struct hl_device *hdev, int dcore, int inst, u32 offset, - void *data) + struct iterate_module_ctx *ctx) { - struct gaudi2_tpc_idle_data *idle_data = (struct gaudi2_tpc_idle_data *)data; + struct gaudi2_tpc_idle_data *idle_data = ctx->data; u32 tpc_cfg_sts, qm_glbl_sts0, qm_glbl_sts1, qm_cgm_sts; bool is_eng_idle; int engine_idx; @@ -6172,14 +6276,15 @@ static void gaudi2_is_tpc_engine_idle(struct hl_device *hdev, int dcore, int ins if (idle_data->mask && !is_eng_idle) set_bit(engine_idx, idle_data->mask); - if (idle_data->s) - seq_printf(idle_data->s, idle_data->tpc_fmt, dcore, inst, + if (idle_data->e) + hl_engine_data_sprintf(idle_data->e, + idle_data->tpc_fmt, dcore, inst, is_eng_idle ? "Y" : "N", qm_glbl_sts0, qm_cgm_sts, tpc_cfg_sts); } -static bool gaudi2_is_device_idle(struct hl_device *hdev, u64 *mask_arr, - u8 mask_len, struct seq_file *s) +static bool gaudi2_is_device_idle(struct hl_device *hdev, u64 *mask_arr, u8 mask_len, + struct engines_data *e) { u32 qm_glbl_sts0, qm_glbl_sts1, qm_cgm_sts, dma_core_idle_ind_mask, mme_arch_sts, dec_swreg15, dec_enabled_bit; @@ -6197,7 +6302,7 @@ static bool gaudi2_is_device_idle(struct hl_device *hdev, u64 *mask_arr, struct gaudi2_tpc_idle_data tpc_idle_data = { .tpc_fmt = "%-6d%-5d%-9s%#-14x%#-12x%#x\n", - .s = s, + .e = e, .mask = mask, .is_idle = &is_idle, }; @@ -6209,8 +6314,8 @@ static bool gaudi2_is_device_idle(struct hl_device *hdev, u64 *mask_arr, int engine_idx, i, j; /* EDMA, Two engines per Dcore */ - if (s) - seq_puts(s, + if (e) + hl_engine_data_sprintf(e, "\nCORE EDMA is_idle QM_GLBL_STS0 DMA_CORE_IDLE_IND_MASK\n" "---- ---- ------- ------------ ----------------------\n"); @@ -6239,19 +6344,19 @@ static bool gaudi2_is_device_idle(struct hl_device *hdev, u64 *mask_arr, if (mask && !is_eng_idle) set_bit(engine_idx, mask); - if (s) - seq_printf(s, edma_fmt, i, j, - is_eng_idle ? "Y" : "N", - qm_glbl_sts0, - dma_core_idle_ind_mask); + if (e) + hl_engine_data_sprintf(e, edma_fmt, i, j, + is_eng_idle ? "Y" : "N", + qm_glbl_sts0, + dma_core_idle_ind_mask); } } /* PDMA, Two engines in Full chip */ - if (s) - seq_puts(s, - "\nPDMA is_idle QM_GLBL_STS0 DMA_CORE_IDLE_IND_MASK\n" - "---- ------- ------------ ----------------------\n"); + if (e) + hl_engine_data_sprintf(e, + "\nPDMA is_idle QM_GLBL_STS0 DMA_CORE_IDLE_IND_MASK\n" + "---- ------- ------------ ----------------------\n"); for (i = 0 ; i < NUM_OF_PDMA ; i++) { engine_idx = GAUDI2_ENGINE_ID_PDMA_0 + i; @@ -6269,16 +6374,16 @@ static bool gaudi2_is_device_idle(struct hl_device *hdev, u64 *mask_arr, if (mask && !is_eng_idle) set_bit(engine_idx, mask); - if (s) - seq_printf(s, pdma_fmt, i, is_eng_idle ? "Y" : "N", qm_glbl_sts0, - dma_core_idle_ind_mask); + if (e) + hl_engine_data_sprintf(e, pdma_fmt, i, is_eng_idle ? "Y" : "N", + qm_glbl_sts0, dma_core_idle_ind_mask); } /* NIC, twelve macros in Full chip */ - if (s && hdev->nic_ports_mask) - seq_puts(s, - "\nNIC is_idle QM_GLBL_STS0 QM_CGM_STS\n" - "--- ------- ------------ ----------\n"); + if (e && hdev->nic_ports_mask) + hl_engine_data_sprintf(e, + "\nNIC is_idle QM_GLBL_STS0 QM_CGM_STS\n" + "--- ------- ------------ ----------\n"); for (i = 0 ; i < NIC_NUMBER_OF_ENGINES ; i++) { if (!(i & 1)) @@ -6302,15 +6407,15 @@ static bool gaudi2_is_device_idle(struct hl_device *hdev, u64 *mask_arr, if (mask && !is_eng_idle) set_bit(engine_idx, mask); - if (s) - seq_printf(s, nic_fmt, i, is_eng_idle ? "Y" : "N", qm_glbl_sts0, - qm_cgm_sts); + if (e) + hl_engine_data_sprintf(e, nic_fmt, i, is_eng_idle ? "Y" : "N", + qm_glbl_sts0, qm_cgm_sts); } - if (s) - seq_puts(s, - "\nMME Stub is_idle QM_GLBL_STS0 MME_ARCH_STATUS\n" - "--- ---- ------- ------------ ---------------\n"); + if (e) + hl_engine_data_sprintf(e, + "\nMME Stub is_idle QM_GLBL_STS0 MME_ARCH_STATUS\n" + "--- ---- ------- ------------ ---------------\n"); /* MME, one per Dcore */ for (i = 0 ; i < NUM_OF_DCORES ; i++) { engine_idx = GAUDI2_DCORE0_ENGINE_ID_MME + i * GAUDI2_ENGINE_ID_DCORE_OFFSET; @@ -6327,8 +6432,8 @@ static bool gaudi2_is_device_idle(struct hl_device *hdev, u64 *mask_arr, is_eng_idle &= IS_MME_IDLE(mme_arch_sts); is_idle &= is_eng_idle; - if (s) - seq_printf(s, mme_fmt, i, "N", + if (e) + hl_engine_data_sprintf(e, mme_fmt, i, "N", is_eng_idle ? "Y" : "N", qm_glbl_sts0, mme_arch_sts); @@ -6340,16 +6445,16 @@ static bool gaudi2_is_device_idle(struct hl_device *hdev, u64 *mask_arr, /* * TPC */ - if (s && prop->tpc_enabled_mask) - seq_puts(s, + if (e && prop->tpc_enabled_mask) + hl_engine_data_sprintf(e, "\nCORE TPC is_idle QM_GLBL_STS0 QM_CGM_STS DMA_CORE_IDLE_IND_MASK\n" "---- --- -------- ------------ ---------- ----------------------\n"); gaudi2_iterate_tpcs(hdev, &tpc_iter); /* Decoders, two each Dcore and two shared PCIe decoders */ - if (s && (prop->decoder_enabled_mask & (~PCIE_DEC_EN_MASK))) - seq_puts(s, + if (e && (prop->decoder_enabled_mask & (~PCIE_DEC_EN_MASK))) + hl_engine_data_sprintf(e, "\nCORE DEC is_idle VSI_CMD_SWREG15\n" "---- --- ------- ---------------\n"); @@ -6370,13 +6475,14 @@ static bool gaudi2_is_device_idle(struct hl_device *hdev, u64 *mask_arr, if (mask && !is_eng_idle) set_bit(engine_idx, mask); - if (s) - seq_printf(s, dec_fmt, i, j, is_eng_idle ? "Y" : "N", dec_swreg15); + if (e) + hl_engine_data_sprintf(e, dec_fmt, i, j, + is_eng_idle ? "Y" : "N", dec_swreg15); } } - if (s && (prop->decoder_enabled_mask & PCIE_DEC_EN_MASK)) - seq_puts(s, + if (e && (prop->decoder_enabled_mask & PCIE_DEC_EN_MASK)) + hl_engine_data_sprintf(e, "\nPCIe DEC is_idle VSI_CMD_SWREG15\n" "-------- ------- ---------------\n"); @@ -6395,12 +6501,13 @@ static bool gaudi2_is_device_idle(struct hl_device *hdev, u64 *mask_arr, if (mask && !is_eng_idle) set_bit(engine_idx, mask); - if (s) - seq_printf(s, pcie_dec_fmt, i, is_eng_idle ? "Y" : "N", dec_swreg15); + if (e) + hl_engine_data_sprintf(e, pcie_dec_fmt, i, + is_eng_idle ? "Y" : "N", dec_swreg15); } - if (s) - seq_puts(s, + if (e) + hl_engine_data_sprintf(e, "\nCORE ROT is_idle QM_GLBL_STS0 QM_CGM_STS DMA_CORE_STS0\n" "---- ---- ------- ------------ ---------- -------------\n"); @@ -6419,8 +6526,8 @@ static bool gaudi2_is_device_idle(struct hl_device *hdev, u64 *mask_arr, if (mask && !is_eng_idle) set_bit(engine_idx, mask); - if (s) - seq_printf(s, rot_fmt, i, 0, is_eng_idle ? "Y" : "N", + if (e) + hl_engine_data_sprintf(e, rot_fmt, i, 0, is_eng_idle ? "Y" : "N", qm_glbl_sts0, qm_cgm_sts, "-"); } @@ -6443,22 +6550,6 @@ static void gaudi2_hw_queues_unlock(struct hl_device *hdev) spin_unlock(&gaudi2->hw_queues_lock); } -static void gaudi2_kdma_lock(struct hl_device *hdev, int dcore_id) - __acquires(&gaudi2->kdma_lock) -{ - struct gaudi2_device *gaudi2 = hdev->asic_specific; - - spin_lock(&gaudi2->kdma_lock); -} - -static void gaudi2_kdma_unlock(struct hl_device *hdev, int dcore_id) - __releases(&gaudi2->kdma_lock) -{ - struct gaudi2_device *gaudi2 = hdev->asic_specific; - - spin_unlock(&gaudi2->kdma_lock); -} - static u32 gaudi2_get_pci_id(struct hl_device *hdev) { return hdev->pdev->device; @@ -6725,9 +6816,9 @@ static int gaudi2_mmu_shared_prepare(struct hl_device *hdev, u32 asid) } static void gaudi2_tpc_mmu_prepare(struct hl_device *hdev, int dcore, int inst, u32 offset, - void *data) + struct iterate_module_ctx *ctx) { - struct gaudi2_tpc_mmu_data *mmu_data = (struct gaudi2_tpc_mmu_data *)data; + struct gaudi2_tpc_mmu_data *mmu_data = ctx->data; WREG32(mmDCORE0_TPC0_CFG_AXUSER_HB_MMU_BP + offset, 0); WREG32(mmDCORE0_TPC0_CFG_AXUSER_HB_ASID + offset, mmu_data->rw_asid); @@ -7020,10 +7111,6 @@ static void gaudi2_razwi_rr_hbw_shared_printf_info(struct hl_device *hdev, razwi_lo = le32_to_cpu(razwi_info->hbw.rr_aw_razwi_lo_reg); razwi_xy = le32_to_cpu(razwi_info->hbw.rr_aw_razwi_id_reg); } - - dev_err_ratelimited(hdev->dev, - "%s-RAZWI SHARED RR HBW WR error, captured address HI 0x%x LO 0x%x, Initiator coordinates 0x%x\n", - name, razwi_hi, razwi_lo, razwi_xy); } else { if (read_razwi_regs) { razwi_hi = RREG32(rtr_mstr_if_base_addr + RR_SHRD_HBW_AR_RAZWI_HI); @@ -7034,11 +7121,11 @@ static void gaudi2_razwi_rr_hbw_shared_printf_info(struct hl_device *hdev, razwi_lo = le32_to_cpu(razwi_info->hbw.rr_ar_razwi_lo_reg); razwi_xy = le32_to_cpu(razwi_info->hbw.rr_ar_razwi_id_reg); } - - dev_err_ratelimited(hdev->dev, - "%s-RAZWI SHARED RR HBW AR error, captured address HI 0x%x LO 0x%x, Initiator coordinates 0x%x\n", - name, razwi_hi, razwi_lo, razwi_xy); } + + dev_err_ratelimited(hdev->dev, + "%s-RAZWI SHARED RR HBW %s error, address %#llx, Initiator coordinates 0x%x\n", + name, is_write ? "WR" : "RD", (u64)razwi_hi << 32 | razwi_lo, razwi_xy); } static void gaudi2_razwi_rr_lbw_shared_printf_info(struct hl_device *hdev, @@ -7296,7 +7383,79 @@ static void gaudi2_check_if_razwi_happened(struct hl_device *hdev) gaudi2_ack_module_razwi_event_handler(hdev, RAZWI_ROT, mod_idx, 0, NULL); } -static void gaudi2_razwi_unmapped_addr_hbw_printf_info(struct hl_device *hdev, +static const char *gaudi2_get_initiators_name(u32 rtr_id) +{ + switch (rtr_id) { + case DCORE0_RTR0: + return "DEC0/1/8/9, TPC24, PDMA0/1, PMMU, PCIE_IF, EDMA0/2, HMMU0/2/4/6, CPU"; + case DCORE0_RTR1: + return "TPC0/1"; + case DCORE0_RTR2: + return "TPC2/3"; + case DCORE0_RTR3: + return "TPC4/5"; + case DCORE0_RTR4: + return "MME0_SBTE0/1"; + case DCORE0_RTR5: + return "MME0_WAP0/SBTE2"; + case DCORE0_RTR6: + return "MME0_CTRL_WR/SBTE3"; + case DCORE0_RTR7: + return "MME0_WAP1/CTRL_RD/SBTE4"; + case DCORE1_RTR0: + return "MME1_WAP1/CTRL_RD/SBTE4"; + case DCORE1_RTR1: + return "MME1_CTRL_WR/SBTE3"; + case DCORE1_RTR2: + return "MME1_WAP0/SBTE2"; + case DCORE1_RTR3: + return "MME1_SBTE0/1"; + case DCORE1_RTR4: + return "TPC10/11"; + case DCORE1_RTR5: + return "TPC8/9"; + case DCORE1_RTR6: + return "TPC6/7"; + case DCORE1_RTR7: + return "DEC2/3, NIC0/1/2/3/4, ARC_FARM, KDMA, EDMA1/3, HMMU1/3/5/7"; + case DCORE2_RTR0: + return "DEC4/5, NIC5/6/7/8, EDMA4/6, HMMU8/10/12/14, ROT0"; + case DCORE2_RTR1: + return "TPC16/17"; + case DCORE2_RTR2: + return "TPC14/15"; + case DCORE2_RTR3: + return "TPC12/13"; + case DCORE2_RTR4: + return "MME2_SBTE0/1"; + case DCORE2_RTR5: + return "MME2_WAP0/SBTE2"; + case DCORE2_RTR6: + return "MME2_CTRL_WR/SBTE3"; + case DCORE2_RTR7: + return "MME2_WAP1/CTRL_RD/SBTE4"; + case DCORE3_RTR0: + return "MME3_WAP1/CTRL_RD/SBTE4"; + case DCORE3_RTR1: + return "MME3_CTRL_WR/SBTE3"; + case DCORE3_RTR2: + return "MME3_WAP0/SBTE2"; + case DCORE3_RTR3: + return "MME3_SBTE0/1"; + case DCORE3_RTR4: + return "TPC18/19"; + case DCORE3_RTR5: + return "TPC20/21"; + case DCORE3_RTR6: + return "TPC22/23"; + case DCORE3_RTR7: + return "DEC6/7, NIC9/10/11, EDMA5/7, HMMU9/11/13/15, ROT1, PSOC"; + default: + return "N/A"; + } +} + +static void gaudi2_razwi_unmapped_addr_hbw_printf_info(struct hl_device *hdev, u32 rtr_id, u64 rtr_ctrl_base_addr, bool is_write) { u32 razwi_hi, razwi_lo; @@ -7305,50 +7464,47 @@ static void gaudi2_razwi_unmapped_addr_hbw_printf_info(struct hl_device *hdev, razwi_hi = RREG32(rtr_ctrl_base_addr + DEC_RAZWI_HBW_AW_ADDR_HI); razwi_lo = RREG32(rtr_ctrl_base_addr + DEC_RAZWI_HBW_AW_ADDR_LO); - dev_err_ratelimited(hdev->dev, - "RAZWI PSOC unmapped HBW WR error, ctr_base 0x%llx, captured address HI 0x%x, LO 0x%x\n", - rtr_ctrl_base_addr, razwi_hi, razwi_lo); - /* Clear set indication */ WREG32(rtr_ctrl_base_addr + DEC_RAZWI_HBW_AW_SET, 0x1); } else { razwi_hi = RREG32(rtr_ctrl_base_addr + DEC_RAZWI_HBW_AR_ADDR_HI); - razwi_lo = RREG32(rtr_ctrl_base_addr + DEC_RAZWI_HBW_AR_ADDR_LO); - dev_err_ratelimited(hdev->dev, - "RAZWI PSOC unmapped HBW AR error, ctr_base 0x%llx, captured address HI 0x%x, LO 0x%x\n", - rtr_ctrl_base_addr, razwi_hi, razwi_lo); - /* Clear set indication */ WREG32(rtr_ctrl_base_addr + DEC_RAZWI_HBW_AR_SET, 0x1); } + + dev_err_ratelimited(hdev->dev, + "RAZWI PSOC unmapped HBW %s error, rtr id %u, address %#llx\n", + is_write ? "WR" : "RD", rtr_id, (u64)razwi_hi << 32 | razwi_lo); + + dev_err_ratelimited(hdev->dev, + "Initiators: %s\n", gaudi2_get_initiators_name(rtr_id)); } -static void gaudi2_razwi_unmapped_addr_lbw_printf_info(struct hl_device *hdev, - u64 rtr_ctrl_base_addr, bool is_write) +static void gaudi2_razwi_unmapped_addr_lbw_printf_info(struct hl_device *hdev, u32 rtr_id, + u64 rtr_ctrl_base_addr, bool is_write) { u32 razwi_addr; if (is_write) { razwi_addr = RREG32(rtr_ctrl_base_addr + DEC_RAZWI_LBW_AW_ADDR); - dev_err_ratelimited(hdev->dev, - "RAZWI PSOC unmapped LBW WR error, ctr_base 0x%llx, captured address 0x%x\n", - rtr_ctrl_base_addr, razwi_addr); - /* Clear set indication */ WREG32(rtr_ctrl_base_addr + DEC_RAZWI_LBW_AW_SET, 0x1); } else { razwi_addr = RREG32(rtr_ctrl_base_addr + DEC_RAZWI_LBW_AR_ADDR); - dev_err_ratelimited(hdev->dev, - "RAZWI PSOC unmapped LBW AR error, ctr_base 0x%llx, captured address 0x%x\n", - rtr_ctrl_base_addr, razwi_addr); - /* Clear set indication */ WREG32(rtr_ctrl_base_addr + DEC_RAZWI_LBW_AR_SET, 0x1); } + + dev_err_ratelimited(hdev->dev, + "RAZWI PSOC unmapped LBW %s error, rtr id %u, address %#x\n", + is_write ? "WR" : "RD", rtr_id, razwi_addr); + + dev_err_ratelimited(hdev->dev, + "Initiators: %s\n", gaudi2_get_initiators_name(rtr_id)); } /* PSOC RAZWI interrupt occurs only when trying to access a bad address */ @@ -7366,21 +7522,16 @@ static void gaudi2_ack_psoc_razwi_event_handler(struct hl_device *hdev) } razwi_mask_info = RREG32(mmPSOC_GLOBAL_CONF_RAZWI_MASK_INFO); - - xy = (razwi_mask_info & PSOC_GLOBAL_CONF_RAZWI_MASK_INFO_AXUSER_L_MASK) - >> PSOC_GLOBAL_CONF_RAZWI_MASK_INFO_AXUSER_L_SHIFT; + xy = FIELD_GET(PSOC_GLOBAL_CONF_RAZWI_MASK_INFO_AXUSER_L_MASK, razwi_mask_info); dev_err_ratelimited(hdev->dev, - "PSOC RAZWI interrupt: Mask %d, WAS_AR %d, WAS_AW %d, AXUSER_L 0x%x AXUSER_H 0x%x\n", - (razwi_mask_info & PSOC_GLOBAL_CONF_RAZWI_MASK_INFO_MASK_MASK) - >> PSOC_GLOBAL_CONF_RAZWI_MASK_INFO_MASK_SHIFT, - (razwi_mask_info & PSOC_GLOBAL_CONF_RAZWI_MASK_INFO_WAS_AR_MASK) - >> PSOC_GLOBAL_CONF_RAZWI_MASK_INFO_WAS_AR_SHIFT, - (razwi_mask_info & PSOC_GLOBAL_CONF_RAZWI_MASK_INFO_WAS_AW_MASK) - >> PSOC_GLOBAL_CONF_RAZWI_MASK_INFO_WAS_AW_SHIFT, xy, - (razwi_mask_info & - PSOC_GLOBAL_CONF_RAZWI_MASK_INFO_AXUSER_H_MASK) - >> PSOC_GLOBAL_CONF_RAZWI_MASK_INFO_AXUSER_H_SHIFT); + "PSOC RAZWI interrupt: Mask %d, AR %d, AW %d, AXUSER_L 0x%x AXUSER_H 0x%x\n", + FIELD_GET(PSOC_GLOBAL_CONF_RAZWI_MASK_INFO_MASK_MASK, razwi_mask_info), + FIELD_GET(PSOC_GLOBAL_CONF_RAZWI_MASK_INFO_WAS_AR_MASK, razwi_mask_info), + FIELD_GET(PSOC_GLOBAL_CONF_RAZWI_MASK_INFO_WAS_AW_MASK, razwi_mask_info), + xy, + FIELD_GET(PSOC_GLOBAL_CONF_RAZWI_MASK_INFO_AXUSER_H_MASK, razwi_mask_info)); + if (xy == 0) { dev_err_ratelimited(hdev->dev, "PSOC RAZWI interrupt: received event from 0 rtr coordinates\n"); @@ -7410,16 +7561,20 @@ static void gaudi2_ack_psoc_razwi_event_handler(struct hl_device *hdev) lbw_ar_set = RREG32(rtr_ctrl_base_addr + DEC_RAZWI_LBW_AR_SET); if (hbw_aw_set) - gaudi2_razwi_unmapped_addr_hbw_printf_info(hdev, rtr_ctrl_base_addr, true); + gaudi2_razwi_unmapped_addr_hbw_printf_info(hdev, rtr_id, + rtr_ctrl_base_addr, true); if (hbw_ar_set) - gaudi2_razwi_unmapped_addr_hbw_printf_info(hdev, rtr_ctrl_base_addr, false); + gaudi2_razwi_unmapped_addr_hbw_printf_info(hdev, rtr_id, + rtr_ctrl_base_addr, false); if (lbw_aw_set) - gaudi2_razwi_unmapped_addr_lbw_printf_info(hdev, rtr_ctrl_base_addr, true); + gaudi2_razwi_unmapped_addr_lbw_printf_info(hdev, rtr_id, + rtr_ctrl_base_addr, true); if (lbw_ar_set) - gaudi2_razwi_unmapped_addr_lbw_printf_info(hdev, rtr_ctrl_base_addr, false); + gaudi2_razwi_unmapped_addr_lbw_printf_info(hdev, rtr_id, + rtr_ctrl_base_addr, false); clear: /* Clear Interrupts only on pldm or if f/w doesn't handle interrupts */ @@ -7811,14 +7966,58 @@ static void gaudi2_handle_dma_core_event(struct hl_device *hdev, u64 intr_cause_ gaudi2_dma_core_interrupts_cause[i]); } +static void gaudi2_print_pcie_mstr_rr_mstr_if_razwi_info(struct hl_device *hdev) +{ + u32 mstr_if_base_addr = mmPCIE_MSTR_RR_MSTR_IF_RR_SHRD_HBW_BASE, razwi_happened_addr; + + razwi_happened_addr = mstr_if_base_addr + RR_SHRD_HBW_AW_RAZWI_HAPPENED; + if (RREG32(razwi_happened_addr)) { + gaudi2_razwi_rr_hbw_shared_printf_info(hdev, mstr_if_base_addr, true, "PCIE", true, + NULL); + WREG32(razwi_happened_addr, 0x1); + } + + razwi_happened_addr = mstr_if_base_addr + RR_SHRD_HBW_AR_RAZWI_HAPPENED; + if (RREG32(razwi_happened_addr)) { + gaudi2_razwi_rr_hbw_shared_printf_info(hdev, mstr_if_base_addr, false, "PCIE", true, + NULL); + WREG32(razwi_happened_addr, 0x1); + } + + razwi_happened_addr = mstr_if_base_addr + RR_SHRD_LBW_AW_RAZWI_HAPPENED; + if (RREG32(razwi_happened_addr)) { + gaudi2_razwi_rr_lbw_shared_printf_info(hdev, mstr_if_base_addr, true, "PCIE", true, + NULL); + WREG32(razwi_happened_addr, 0x1); + } + + razwi_happened_addr = mstr_if_base_addr + RR_SHRD_LBW_AR_RAZWI_HAPPENED; + if (RREG32(razwi_happened_addr)) { + gaudi2_razwi_rr_lbw_shared_printf_info(hdev, mstr_if_base_addr, false, "PCIE", true, + NULL); + WREG32(razwi_happened_addr, 0x1); + } +} + static void gaudi2_print_pcie_addr_dec_info(struct hl_device *hdev, u64 intr_cause_data) { int i; - for (i = 0 ; i < GAUDI2_NUM_OF_PCIE_ADDR_DEC_ERR_CAUSE; i++) - if (intr_cause_data & BIT_ULL(i)) - dev_err_ratelimited(hdev->dev, "PCIE ADDR DEC Error: %s\n", - gaudi2_pcie_addr_dec_error_cause[i]); + for (i = 0 ; i < GAUDI2_NUM_OF_PCIE_ADDR_DEC_ERR_CAUSE ; i++) { + if (!(intr_cause_data & BIT_ULL(i))) + continue; + + dev_err_ratelimited(hdev->dev, "PCIE ADDR DEC Error: %s\n", + gaudi2_pcie_addr_dec_error_cause[i]); + + switch (intr_cause_data & BIT_ULL(i)) { + case PCIE_WRAP_PCIE_IC_SEI_INTR_IND_AXI_LBW_ERR_INTR_MASK: + break; + case PCIE_WRAP_PCIE_IC_SEI_INTR_IND_BAD_ACCESS_INTR_MASK: + gaudi2_print_pcie_mstr_rr_mstr_if_razwi_info(hdev); + break; + } + } } static void gaudi2_handle_pif_fatal(struct hl_device *hdev, u64 intr_cause_data) @@ -8158,10 +8357,17 @@ static bool gaudi2_handle_hbm_mc_sei_err(struct hl_device *hdev, u16 event_type, return true; } - dev_err_ratelimited(hdev->dev, - "System Error Interrupt - HBM(%u) MC(%u) MC_CH(%u) MC_PC(%u). Critical(%u). Error cause: %s\n", - hbm_id, mc_id, sei_data->hdr.mc_channel, sei_data->hdr.mc_pseudo_channel, - sei_data->hdr.is_critical, hbm_mc_sei_cause[cause_idx]); + if (sei_data->hdr.is_critical) + dev_err(hdev->dev, + "System Critical Error Interrupt - HBM(%u) MC(%u) MC_CH(%u) MC_PC(%u). Error cause: %s\n", + hbm_id, mc_id, sei_data->hdr.mc_channel, sei_data->hdr.mc_pseudo_channel, + hbm_mc_sei_cause[cause_idx]); + + else + dev_err_ratelimited(hdev->dev, + "System Non-Critical Error Interrupt - HBM(%u) MC(%u) MC_CH(%u) MC_PC(%u). Error cause: %s\n", + hbm_id, mc_id, sei_data->hdr.mc_channel, sei_data->hdr.mc_pseudo_channel, + hbm_mc_sei_cause[cause_idx]); /* Print error-specific info */ switch (cause_idx) { @@ -8371,6 +8577,7 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent struct gaudi2_device *gaudi2 = hdev->asic_specific; bool reset_required = false, skip_reset = false; int index, sbte_index; + u64 event_mask = 0; u16 event_type; ctl = le32_to_cpu(eq_entry->hdr.ctl); @@ -8392,6 +8599,7 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent fallthrough; case GAUDI2_EVENT_ROTATOR0_SERR ... GAUDI2_EVENT_ROTATOR1_DERR: reset_flags |= HL_DRV_RESET_FW_FATAL_ERR; + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; reset_required = gaudi2_handle_ecc_event(hdev, event_type, &eq_entry->ecc_data); break; @@ -8401,21 +8609,25 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent fallthrough; case GAUDI2_EVENT_NIC0_QM0 ... GAUDI2_EVENT_NIC11_QM1: gaudi2_handle_qman_err(hdev, event_type); + event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR; break; case GAUDI2_EVENT_ARC_AXI_ERROR_RESPONSE_0: reset_flags |= HL_DRV_RESET_FW_FATAL_ERR; gaudi2_handle_arc_farm_sei_err(hdev); + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; break; case GAUDI2_EVENT_CPU_AXI_ERR_RSP: gaudi2_handle_cpu_sei_err(hdev); + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; break; case GAUDI2_EVENT_PDMA_CH0_AXI_ERR_RSP: case GAUDI2_EVENT_PDMA_CH1_AXI_ERR_RSP: reset_flags |= HL_DRV_RESET_FW_FATAL_ERR; gaudi2_handle_qm_sei_err(hdev, event_type, &eq_entry->razwi_info); + event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR; break; case GAUDI2_EVENT_ROTATOR0_AXI_ERROR_RESPONSE: @@ -8423,6 +8635,7 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent index = event_type - GAUDI2_EVENT_ROTATOR0_AXI_ERROR_RESPONSE; gaudi2_handle_rot_err(hdev, index, &eq_entry->razwi_with_intr_cause); gaudi2_handle_qm_sei_err(hdev, event_type, NULL); + event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR; break; case GAUDI2_EVENT_TPC0_AXI_ERR_RSP ... GAUDI2_EVENT_TPC24_AXI_ERR_RSP: @@ -8430,11 +8643,13 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent gaudi2_tpc_ack_interrupts(hdev, index, "AXI_ERR_RSP", &eq_entry->razwi_with_intr_cause); gaudi2_handle_qm_sei_err(hdev, event_type, NULL); + event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR; break; case GAUDI2_EVENT_DEC0_AXI_ERR_RSPONSE ... GAUDI2_EVENT_DEC9_AXI_ERR_RSPONSE: index = event_type - GAUDI2_EVENT_DEC0_AXI_ERR_RSPONSE; gaudi2_handle_dec_err(hdev, index, "AXI_ERR_RESPONSE", &eq_entry->razwi_info); + event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR; break; case GAUDI2_EVENT_TPC0_KERNEL_ERR: @@ -8465,6 +8680,7 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent index = (event_type - GAUDI2_EVENT_TPC0_KERNEL_ERR) / (GAUDI2_EVENT_TPC1_KERNEL_ERR - GAUDI2_EVENT_TPC0_KERNEL_ERR); gaudi2_tpc_ack_interrupts(hdev, index, "KRN_ERR", &eq_entry->razwi_with_intr_cause); + event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR; break; case GAUDI2_EVENT_DEC0_SPI: @@ -8480,6 +8696,7 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent index = (event_type - GAUDI2_EVENT_DEC0_SPI) / (GAUDI2_EVENT_DEC1_SPI - GAUDI2_EVENT_DEC0_SPI); gaudi2_handle_dec_err(hdev, index, "SPI", &eq_entry->razwi_info); + event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR; break; case GAUDI2_EVENT_MME0_CTRL_AXI_ERROR_RESPONSE: @@ -8492,6 +8709,7 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent gaudi2_handle_mme_err(hdev, index, "CTRL_AXI_ERROR_RESPONSE", &eq_entry->razwi_info); gaudi2_handle_qm_sei_err(hdev, event_type, NULL); + event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR; break; case GAUDI2_EVENT_MME0_QMAN_SW_ERROR: @@ -8502,6 +8720,7 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent (GAUDI2_EVENT_MME1_QMAN_SW_ERROR - GAUDI2_EVENT_MME0_QMAN_SW_ERROR); gaudi2_handle_mme_err(hdev, index, "QMAN_SW_ERROR", &eq_entry->razwi_info); + event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR; break; case GAUDI2_EVENT_MME0_WAP_SOURCE_RESULT_INVALID: @@ -8512,22 +8731,27 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent (GAUDI2_EVENT_MME1_WAP_SOURCE_RESULT_INVALID - GAUDI2_EVENT_MME0_WAP_SOURCE_RESULT_INVALID); gaudi2_handle_mme_wap_err(hdev, index, &eq_entry->razwi_info); + event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR; break; case GAUDI2_EVENT_KDMA_CH0_AXI_ERR_RSP: case GAUDI2_EVENT_KDMA0_CORE: gaudi2_handle_kdma_core_event(hdev, le64_to_cpu(eq_entry->intr_cause.intr_cause_data)); + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; break; case GAUDI2_EVENT_HDMA2_CORE ... GAUDI2_EVENT_PDMA1_CORE: gaudi2_handle_dma_core_event(hdev, le64_to_cpu(eq_entry->intr_cause.intr_cause_data)); + event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR; break; case GAUDI2_EVENT_PCIE_ADDR_DEC_ERR: gaudi2_print_pcie_addr_dec_info(hdev, le64_to_cpu(eq_entry->intr_cause.intr_cause_data)); + reset_flags |= HL_DRV_RESET_FW_FATAL_ERR; + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; break; case GAUDI2_EVENT_HMMU0_PAGE_FAULT_OR_WR_PERM ... GAUDI2_EVENT_HMMU12_SECURITY_ERROR: @@ -8536,25 +8760,30 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent case GAUDI2_EVENT_PMMU_AXI_ERR_RSP_0: gaudi2_handle_mmu_spi_sei_err(hdev, event_type); reset_flags |= HL_DRV_RESET_FW_FATAL_ERR; + event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR; break; case GAUDI2_EVENT_HIF0_FATAL ... GAUDI2_EVENT_HIF12_FATAL: gaudi2_handle_hif_fatal(hdev, event_type, le64_to_cpu(eq_entry->intr_cause.intr_cause_data)); reset_flags |= HL_DRV_RESET_FW_FATAL_ERR; + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; break; case GAUDI2_EVENT_PMMU_FATAL_0: gaudi2_handle_pif_fatal(hdev, le64_to_cpu(eq_entry->intr_cause.intr_cause_data)); reset_flags |= HL_DRV_RESET_FW_FATAL_ERR; + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; break; case GAUDI2_EVENT_PSOC63_RAZWI_OR_PID_MIN_MAX_INTERRUPT: gaudi2_ack_psoc_razwi_event_handler(hdev); + event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR; break; case GAUDI2_EVENT_HBM0_MC0_SEI_SEVERE ... GAUDI2_EVENT_HBM5_MC1_SEI_NON_SEVERE: + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; if (gaudi2_handle_hbm_mc_sei_err(hdev, event_type, &eq_entry->sei_data)) { reset_flags |= HL_DRV_RESET_FW_FATAL_ERR; reset_required = true; @@ -8563,25 +8792,31 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent case GAUDI2_EVENT_HBM_CATTRIP_0 ... GAUDI2_EVENT_HBM_CATTRIP_5: gaudi2_handle_hbm_cattrip(hdev, le64_to_cpu(eq_entry->intr_cause.intr_cause_data)); + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; break; case GAUDI2_EVENT_HBM0_MC0_SPI ... GAUDI2_EVENT_HBM5_MC1_SPI: gaudi2_handle_hbm_mc_spi(hdev, le64_to_cpu(eq_entry->intr_cause.intr_cause_data)); + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; break; case GAUDI2_EVENT_PCIE_DRAIN_COMPLETE: gaudi2_handle_pcie_drain(hdev, &eq_entry->pcie_drain_ind_data); + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; break; case GAUDI2_EVENT_PSOC59_RPM_ERROR_OR_DRAIN: gaudi2_handle_psoc_drain(hdev, le64_to_cpu(eq_entry->intr_cause.intr_cause_data)); + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; break; case GAUDI2_EVENT_CPU_AXI_ECC: reset_flags |= HL_DRV_RESET_FW_FATAL_ERR; + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; break; case GAUDI2_EVENT_CPU_L2_RAM_ECC: reset_flags |= HL_DRV_RESET_FW_FATAL_ERR; + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; break; case GAUDI2_EVENT_MME0_SBTE0_AXI_ERR_RSP ... GAUDI2_EVENT_MME0_SBTE4_AXI_ERR_RSP: case GAUDI2_EVENT_MME1_SBTE0_AXI_ERR_RSP ... GAUDI2_EVENT_MME1_SBTE4_AXI_ERR_RSP: @@ -8595,17 +8830,24 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent GAUDI2_EVENT_MME0_SBTE0_AXI_ERR_RSP); gaudi2_handle_mme_sbte_err(hdev, index, sbte_index, le64_to_cpu(eq_entry->intr_cause.intr_cause_data)); + event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR; break; case GAUDI2_EVENT_VM0_ALARM_A ... GAUDI2_EVENT_VM3_ALARM_B: reset_flags |= HL_DRV_RESET_FW_FATAL_ERR; + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; break; case GAUDI2_EVENT_PSOC_AXI_ERR_RSP: + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; + break; case GAUDI2_EVENT_PSOC_PRSTN_FALL: + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; break; case GAUDI2_EVENT_PCIE_APB_TIMEOUT: reset_flags |= HL_DRV_RESET_FW_FATAL_ERR; + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; break; case GAUDI2_EVENT_PCIE_FATAL_ERR: + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; break; case GAUDI2_EVENT_TPC0_BMON_SPMU: case GAUDI2_EVENT_TPC1_BMON_SPMU: @@ -8657,6 +8899,7 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent case GAUDI2_EVENT_DEC8_BMON_SPMU: case GAUDI2_EVENT_DEC9_BMON_SPMU: case GAUDI2_EVENT_ROTATOR0_BMON_SPMU ... GAUDI2_EVENT_SM3_BMON_SPMU: + event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR; break; case GAUDI2_EVENT_CPU_FIX_POWER_ENV_S: @@ -8664,43 +8907,53 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent case GAUDI2_EVENT_CPU_FIX_THERMAL_ENV_S: case GAUDI2_EVENT_CPU_FIX_THERMAL_ENV_E: gaudi2_print_clk_change_info(hdev, event_type); + event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR; break; case GAUDI2_EVENT_CPU_PKT_QUEUE_OUT_SYNC: gaudi2_print_out_of_sync_info(hdev, &eq_entry->pkt_sync_err); + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; break; case GAUDI2_EVENT_PCIE_FLR_REQUESTED: + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; /* Do nothing- FW will handle it */ break; case GAUDI2_EVENT_PCIE_P2P_MSIX: gaudi2_handle_pcie_p2p_msix(hdev); + event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR; break; case GAUDI2_EVENT_SM0_AXI_ERROR_RESPONSE ... GAUDI2_EVENT_SM3_AXI_ERROR_RESPONSE: index = event_type - GAUDI2_EVENT_SM0_AXI_ERROR_RESPONSE; skip_reset = !gaudi2_handle_sm_err(hdev, index); + event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR; break; case GAUDI2_EVENT_PSOC_MME_PLL_LOCK_ERR ... GAUDI2_EVENT_DCORE2_HBM_PLL_LOCK_ERR: + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; break; case GAUDI2_EVENT_CPU_CPLD_SHUTDOWN_CAUSE: dev_info(hdev->dev, "CPLD shutdown cause, reset reason: 0x%llx\n", le64_to_cpu(eq_entry->data[0])); + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; break; case GAUDI2_EVENT_CPU_CPLD_SHUTDOWN_EVENT: dev_err(hdev->dev, "CPLD shutdown event, reset reason: 0x%llx\n", le64_to_cpu(eq_entry->data[0])); + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; break; case GAUDI2_EVENT_CPU_PKT_SANITY_FAILED: gaudi2_print_cpu_pkt_failure_info(hdev, &eq_entry->pkt_sync_err); + event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR; break; case GAUDI2_EVENT_ARC_DCCM_FULL: hl_arc_event_handle(hdev, &eq_entry->arc_data); + event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR; break; default: @@ -8716,15 +8969,22 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent if (!gaudi2_irq_map_table[event_type].msg) hl_fw_unmask_irq(hdev, event_type); + if (event_mask) + hl_notifier_event_send_all(hdev, event_mask); + return; reset_device: if (hdev->hard_reset_on_fw_events) { hl_device_reset(hdev, reset_flags); + event_mask |= HL_NOTIFIER_EVENT_DEVICE_RESET; } else { if (!gaudi2_irq_map_table[event_type].msg) hl_fw_unmask_irq(hdev, event_type); } + + if (event_mask) + hl_notifier_event_send_all(hdev, event_mask); } static int gaudi2_memset_device_memory(struct hl_device *hdev, u64 addr, u64 size, u64 val) @@ -9090,19 +9350,17 @@ static int gaudi2_debugfs_read_dma(struct hl_device *hdev, u64 addr, u32 size, v } /* Create mapping on asic side */ - mutex_lock(&ctx->mmu_lock); + mutex_lock(&hdev->mmu_lock); rc = hl_mmu_map_contiguous(ctx, reserved_va_base, host_mem_dma_addr, SZ_2M); hl_mmu_invalidate_cache_range(hdev, false, MMU_OP_USERPTR | MMU_OP_SKIP_LOW_CACHE_INV, ctx->asid, reserved_va_base, SZ_2M); - mutex_unlock(&ctx->mmu_lock); + mutex_unlock(&hdev->mmu_lock); if (rc) { dev_err(hdev->dev, "Failed to create mapping on asic mmu\n"); goto unreserve_va; } - hdev->asic_funcs->kdma_lock(hdev, 0); - /* Enable MMU on KDMA */ gaudi2_kdma_set_mmbp_asid(hdev, false, ctx->asid); @@ -9130,13 +9388,11 @@ static int gaudi2_debugfs_read_dma(struct hl_device *hdev, u64 addr, u32 size, v gaudi2_kdma_set_mmbp_asid(hdev, true, HL_KERNEL_ASID_ID); - hdev->asic_funcs->kdma_unlock(hdev, 0); - - mutex_lock(&ctx->mmu_lock); + mutex_lock(&hdev->mmu_lock); hl_mmu_unmap_contiguous(ctx, reserved_va_base, SZ_2M); hl_mmu_invalidate_cache_range(hdev, false, MMU_OP_USERPTR, ctx->asid, reserved_va_base, SZ_2M); - mutex_unlock(&ctx->mmu_lock); + mutex_unlock(&hdev->mmu_lock); unreserve_va: hl_unreserve_va_block(hdev, ctx, reserved_va_base, SZ_2M); free_data_buffer: @@ -9189,11 +9445,11 @@ static int gaudi2_internal_cb_pool_init(struct hl_device *hdev, struct hl_ctx *c goto destroy_internal_cb_pool; } - mutex_lock(&ctx->mmu_lock); + mutex_lock(&hdev->mmu_lock); rc = hl_mmu_map_contiguous(ctx, hdev->internal_cb_va_base, hdev->internal_cb_pool_dma_addr, HOST_SPACE_INTERNAL_CB_SZ); hl_mmu_invalidate_cache(hdev, false, MMU_OP_USERPTR); - mutex_unlock(&ctx->mmu_lock); + mutex_unlock(&hdev->mmu_lock); if (rc) goto unreserve_internal_cb_pool; @@ -9218,11 +9474,11 @@ static void gaudi2_internal_cb_pool_fini(struct hl_device *hdev, struct hl_ctx * if (!(gaudi2->hw_cap_initialized & HW_CAP_PMMU)) return; - mutex_lock(&ctx->mmu_lock); + mutex_lock(&hdev->mmu_lock); hl_mmu_unmap_contiguous(ctx, hdev->internal_cb_va_base, HOST_SPACE_INTERNAL_CB_SZ); hl_unreserve_va_block(hdev, ctx, hdev->internal_cb_va_base, HOST_SPACE_INTERNAL_CB_SZ); hl_mmu_invalidate_cache(hdev, true, MMU_OP_USERPTR); - mutex_unlock(&ctx->mmu_lock); + mutex_unlock(&hdev->mmu_lock); gen_pool_destroy(hdev->internal_cb_pool); @@ -9336,7 +9592,7 @@ static u32 gaudi2_get_queue_id_for_cq(struct hl_device *hdev, u32 cq_idx) static u32 gaudi2_gen_signal_cb(struct hl_device *hdev, void *data, u16 sob_id, u32 size, bool eb) { - struct hl_cb *cb = (struct hl_cb *) data; + struct hl_cb *cb = data; struct packet_msg_short *pkt; u32 value, ctl, pkt_size = sizeof(*pkt); @@ -9429,7 +9685,7 @@ static u32 gaudi2_add_fence_pkt(struct packet_fence *pkt) static u32 gaudi2_gen_wait_cb(struct hl_device *hdev, struct hl_gen_wait_properties *prop) { - struct hl_cb *cb = (struct hl_cb *) prop->data; + struct hl_cb *cb = prop->data; void *buf = (void *) (uintptr_t) (cb->kernel_address); u64 monitor_base, fence_addr = 0; @@ -9481,7 +9737,7 @@ static u32 gaudi2_gen_wait_cb(struct hl_device *hdev, struct hl_gen_wait_propert static void gaudi2_reset_sob(struct hl_device *hdev, void *data) { - struct hl_hw_sob *hw_sob = (struct hl_hw_sob *) data; + struct hl_hw_sob *hw_sob = data; dev_dbg(hdev->dev, "reset SOB, q_idx: %d, sob_id: %d\n", hw_sob->q_idx, hw_sob->sob_id); @@ -9724,7 +9980,7 @@ static int gaudi2_get_mmu_base(struct hl_device *hdev, u64 mmu_id, u32 *mmu_base static void gaudi2_ack_mmu_error(struct hl_device *hdev, u64 mmu_id) { - bool is_pmmu = (mmu_id == HW_CAP_PMMU ? true : false); + bool is_pmmu = (mmu_id == HW_CAP_PMMU); struct gaudi2_device *gaudi2 = hdev->asic_specific; u32 mmu_base; @@ -9881,6 +10137,17 @@ static int gaudi2_get_monitor_dump(struct hl_device *hdev, void *data) return -EOPNOTSUPP; } +int gaudi2_send_device_activity(struct hl_device *hdev, bool open) +{ + struct gaudi2_device *gaudi2 = hdev->asic_specific; + + if (!(gaudi2->hw_cap_initialized & HW_CAP_CPU_Q) || hdev->fw_major_version < 37) + return 0; + + /* TODO: add check for FW version using minor ver once it's known */ + return hl_fw_send_device_activity(hdev, open); +} + static const struct hl_asic_funcs gaudi2_funcs = { .early_init = gaudi2_early_init, .early_fini = gaudi2_early_fini, @@ -9927,11 +10194,9 @@ static const struct hl_asic_funcs gaudi2_funcs = { .send_heartbeat = gaudi2_send_heartbeat, .debug_coresight = gaudi2_debug_coresight, .is_device_idle = gaudi2_is_device_idle, - .non_hard_reset_late_init = gaudi2_non_hard_reset_late_init, + .compute_reset_late_init = gaudi2_compute_reset_late_init, .hw_queues_lock = gaudi2_hw_queues_lock, .hw_queues_unlock = gaudi2_hw_queues_unlock, - .kdma_lock = gaudi2_kdma_lock, - .kdma_unlock = gaudi2_kdma_unlock, .get_pci_id = gaudi2_get_pci_id, .get_eeprom_data = gaudi2_get_eeprom_data, .get_monitor_dump = gaudi2_get_monitor_dump, @@ -9978,6 +10243,8 @@ static const struct hl_asic_funcs gaudi2_funcs = { .mmu_get_real_page_size = gaudi2_mmu_get_real_page_size, .access_dev_mem = hl_access_dev_mem, .set_dram_bar_base = gaudi2_set_hbm_bar_base, + .set_engine_cores = gaudi2_set_engine_cores, + .send_device_activity = gaudi2_send_device_activity, }; void gaudi2_set_asic_funcs(struct hl_device *hdev) diff --git a/drivers/misc/habanalabs/gaudi2/gaudi2P.h b/drivers/misc/habanalabs/gaudi2/gaudi2P.h index e4bc4009f05b..a99c348bbf39 100644 --- a/drivers/misc/habanalabs/gaudi2/gaudi2P.h +++ b/drivers/misc/habanalabs/gaudi2/gaudi2P.h @@ -15,7 +15,6 @@ #include "../include/gaudi2/gaudi2_packets.h" #include "../include/gaudi2/gaudi2_fw_if.h" #include "../include/gaudi2/gaudi2_async_events.h" -#include "../include/gaudi2/gaudi2_async_virt_events.h" #define GAUDI2_LINUX_FW_FILE "habanalabs/gaudi2/gaudi2-fit.itb" #define GAUDI2_BOOT_FIT_FILE "habanalabs/gaudi2/gaudi2-boot-fit.itb" @@ -140,9 +139,6 @@ #define VA_HOST_SPACE_HPAGE_START 0xFFF0800000000000ull #define VA_HOST_SPACE_HPAGE_END 0xFFF1000000000000ull /* 140TB */ -#define VA_HOST_SPACE_USER_MAPPED_CB_START 0xFFF1000000000000ull -#define VA_HOST_SPACE_USER_MAPPED_CB_END 0xFFF1000100000000ull /* 4GB */ - /* 140TB */ #define VA_HOST_SPACE_PAGE_SIZE (VA_HOST_SPACE_PAGE_END - VA_HOST_SPACE_PAGE_START) @@ -458,7 +454,6 @@ struct dup_block_ctx { * the user can map. * @lfsr_rand_seeds: array of MME ACC random seeds to set. * @hw_queues_lock: protects the H/W queues from concurrent access. - * @kdma_lock: protects the KDMA engine from concurrent access. * @scratchpad_kernel_address: general purpose PAGE_SIZE contiguous memory, * this memory region should be write-only. * currently used for HBW QMAN writes which is @@ -510,9 +505,6 @@ struct dup_block_ctx { * @flush_db_fifo: flag to force flush DB FIFO after a write. * @hbm_cfg: HBM subsystem settings * @hw_queues_lock_mutex: used by simulator instead of hw_queues_lock. - * @kdma_lock_mutex: used by simulator instead of kdma_lock. - * @use_deprecated_event_mappings: use old event mappings which are about to be - * deprecated */ struct gaudi2_device { int (*cpucp_info_get)(struct hl_device *hdev); @@ -521,7 +513,6 @@ struct gaudi2_device { int lfsr_rand_seeds[MME_NUM_OF_LFSR_SEEDS]; spinlock_t hw_queues_lock; - spinlock_t kdma_lock; void *scratchpad_kernel_address; dma_addr_t scratchpad_bus_address; @@ -562,5 +553,6 @@ void gaudi2_pb_print_security_errors(struct hl_device *hdev, u32 block_addr, u32 u32 offended_addr); int gaudi2_init_security(struct hl_device *hdev); void gaudi2_ack_protection_bits_errors(struct hl_device *hdev); +int gaudi2_send_device_activity(struct hl_device *hdev, bool open); #endif /* GAUDI2P_H_ */ diff --git a/drivers/misc/habanalabs/gaudi2/gaudi2_masks.h b/drivers/misc/habanalabs/gaudi2/gaudi2_masks.h index eed16d642a5a..e9ac87828221 100644 --- a/drivers/misc/habanalabs/gaudi2/gaudi2_masks.h +++ b/drivers/misc/habanalabs/gaudi2/gaudi2_masks.h @@ -51,12 +51,18 @@ (0x1F << PDMA0_QM_GLBL_CFG0_CP_EN_SHIFT) | \ (0x1 << PDMA0_QM_GLBL_CFG0_ARC_CQF_EN_SHIFT)) -#define PDMA1_QMAN_ENABLE \ +#define PDMA0_QMAN_ENABLE \ ((0x3 << PDMA0_QM_GLBL_CFG0_PQF_EN_SHIFT) | \ (0x1F << PDMA0_QM_GLBL_CFG0_CQF_EN_SHIFT) | \ (0x1F << PDMA0_QM_GLBL_CFG0_CP_EN_SHIFT) | \ (0x1 << PDMA0_QM_GLBL_CFG0_ARC_CQF_EN_SHIFT)) +#define PDMA1_QMAN_ENABLE \ + ((0x1 << PDMA0_QM_GLBL_CFG0_PQF_EN_SHIFT) | \ + (0x1F << PDMA0_QM_GLBL_CFG0_CQF_EN_SHIFT) | \ + (0x1F << PDMA0_QM_GLBL_CFG0_CP_EN_SHIFT) | \ + (0x1 << PDMA0_QM_GLBL_CFG0_ARC_CQF_EN_SHIFT)) + /* QM_IDLE_MASK is valid for all engines QM idle check */ #define QM_IDLE_MASK (DCORE0_EDMA0_QM_GLBL_STS0_PQF_IDLE_MASK | \ DCORE0_EDMA0_QM_GLBL_STS0_CQF_IDLE_MASK | \ @@ -138,4 +144,17 @@ #define DCORE0_SYNC_MNGR_OBJS_SOB_OBJ_SIGN_SHIFT 15 #define DCORE0_SYNC_MNGR_OBJS_SOB_OBJ_SIGN_MASK 0x8000 +#define PCIE_WRAP_PCIE_IC_SEI_INTR_IND_AXI_ERR_INTR_SHIFT 0 +#define PCIE_WRAP_PCIE_IC_SEI_INTR_IND_AXI_ERR_INTR_MASK 0x1 +#define PCIE_WRAP_PCIE_IC_SEI_INTR_IND_AXI_LBW_ERR_INTR_SHIFT 1 +#define PCIE_WRAP_PCIE_IC_SEI_INTR_IND_AXI_LBW_ERR_INTR_MASK 0x2 +#define PCIE_WRAP_PCIE_IC_SEI_INTR_IND_BAD_ACCESS_INTR_SHIFT 2 +#define PCIE_WRAP_PCIE_IC_SEI_INTR_IND_BAD_ACCESS_INTR_MASK 0x4 +#define PCIE_WRAP_PCIE_IC_SEI_INTR_IND_AXI_ERR_INTR_MASK_SHIFT 3 +#define PCIE_WRAP_PCIE_IC_SEI_INTR_IND_AXI_ERR_INTR_MASK_MASK 0x8 +#define PCIE_WRAP_PCIE_IC_SEI_INTR_IND_AXI_LBW_ERR_INTR_MASK_SHIFT 4 +#define PCIE_WRAP_PCIE_IC_SEI_INTR_IND_AXI_LBW_ERR_INTR_MASK_MASK 0x10 +#define PCIE_WRAP_PCIE_IC_SEI_INTR_IND_BAD_ACCESS_INTR_MASK_SHIFT 5 +#define PCIE_WRAP_PCIE_IC_SEI_INTR_IND_BAD_ACCESS_INTR_MASK_MASK 0x20 + #endif /* GAUDI2_MASKS_H_ */ diff --git a/drivers/misc/habanalabs/gaudi2/gaudi2_security.c b/drivers/misc/habanalabs/gaudi2/gaudi2_security.c index 89a06ff5ba34..c6906fb14229 100644 --- a/drivers/misc/habanalabs/gaudi2/gaudi2_security.c +++ b/drivers/misc/habanalabs/gaudi2/gaudi2_security.c @@ -2559,6 +2559,10 @@ static const u32 gaudi2_pb_pcie[] = { mmPCIE_WRAP_BASE, }; +static const u32 gaudi2_pb_pcie_unsecured_regs[] = { + mmPCIE_WRAP_SPECIAL_GLBL_SPARE_0, +}; + static const u32 gaudi2_pb_thermal_sensor0[] = { mmDCORE0_XFT_BASE, mmDCORE0_TSTDVS_BASE, @@ -2583,9 +2587,9 @@ struct gaudi2_tpc_pb_data { }; static void gaudi2_config_tpcs_glbl_sec(struct hl_device *hdev, int dcore, int inst, u32 offset, - void *data) + struct iterate_module_ctx *ctx) { - struct gaudi2_tpc_pb_data *pb_data = (struct gaudi2_tpc_pb_data *)data; + struct gaudi2_tpc_pb_data *pb_data = ctx->data; hl_config_glbl_sec(hdev, gaudi2_pb_dcr0_tpc0, pb_data->glbl_sec, offset, pb_data->block_array_size); @@ -2660,15 +2664,14 @@ static int gaudi2_init_pb_tpc(struct hl_device *hdev) struct gaudi2_tpc_arc_pb_data { u32 unsecured_regs_arr_size; u32 arc_regs_arr_size; - int rc; }; static void gaudi2_config_tpcs_pb_ranges(struct hl_device *hdev, int dcore, int inst, u32 offset, - void *data) + struct iterate_module_ctx *ctx) { - struct gaudi2_tpc_arc_pb_data *pb_data = (struct gaudi2_tpc_arc_pb_data *)data; + struct gaudi2_tpc_arc_pb_data *pb_data = ctx->data; - pb_data->rc |= hl_init_pb_ranges(hdev, HL_PB_SHARED, HL_PB_NA, 1, + ctx->rc = hl_init_pb_ranges(hdev, HL_PB_SHARED, HL_PB_NA, 1, offset, gaudi2_pb_dcr0_tpc0_arc, pb_data->arc_regs_arr_size, gaudi2_pb_dcr0_tpc0_arc_unsecured_regs, @@ -2683,12 +2686,12 @@ static int gaudi2_init_pb_tpc_arc(struct hl_device *hdev) tpc_arc_pb_data.arc_regs_arr_size = ARRAY_SIZE(gaudi2_pb_dcr0_tpc0_arc); tpc_arc_pb_data.unsecured_regs_arr_size = ARRAY_SIZE(gaudi2_pb_dcr0_tpc0_arc_unsecured_regs); - tpc_arc_pb_data.rc = 0; + tpc_iter.fn = &gaudi2_config_tpcs_pb_ranges; tpc_iter.data = &tpc_arc_pb_data; gaudi2_iterate_tpcs(hdev, &tpc_iter); - return tpc_arc_pb_data.rc; + return tpc_iter.rc; } static int gaudi2_init_pb_sm_objs(struct hl_device *hdev) @@ -3419,7 +3422,8 @@ static int gaudi2_init_protection_bits(struct hl_device *hdev) rc |= hl_init_pb(hdev, HL_PB_SHARED, HL_PB_NA, HL_PB_SINGLE_INSTANCE, HL_PB_NA, gaudi2_pb_pcie, ARRAY_SIZE(gaudi2_pb_pcie), - NULL, HL_PB_NA); + gaudi2_pb_pcie_unsecured_regs, + ARRAY_SIZE(gaudi2_pb_pcie_unsecured_regs)); /* Thermal Sensor. * Skip when security is enabled in F/W, because the blocks are protected by privileged RR. @@ -3547,9 +3551,9 @@ struct gaudi2_ack_pb_tpc_data { }; static void gaudi2_ack_pb_tpc_config(struct hl_device *hdev, int dcore, int inst, u32 offset, - void *data) + struct iterate_module_ctx *ctx) { - struct gaudi2_ack_pb_tpc_data *pb_data = (struct gaudi2_ack_pb_tpc_data *)data; + struct gaudi2_ack_pb_tpc_data *pb_data = ctx->data; hl_ack_pb_single_dcore(hdev, offset, HL_PB_SINGLE_INSTANCE, HL_PB_NA, gaudi2_pb_dcr0_tpc0, pb_data->tpc_regs_array_size); diff --git a/drivers/misc/habanalabs/goya/goya.c b/drivers/misc/habanalabs/goya/goya.c index db4487c33582..5ef9e3ca97a6 100644 --- a/drivers/misc/habanalabs/goya/goya.c +++ b/drivers/misc/habanalabs/goya/goya.c @@ -916,26 +916,11 @@ int goya_late_init(struct hl_device *hdev) */ void goya_late_fini(struct hl_device *hdev) { - const struct hwmon_channel_info **channel_info_arr; struct goya_device *goya = hdev->asic_specific; - int i = 0; cancel_delayed_work_sync(&goya->goya_work->work_freq); - if (!hdev->hl_chip_info->info) - return; - - channel_info_arr = hdev->hl_chip_info->info; - - while (channel_info_arr[i]) { - kfree(channel_info_arr[i]->config); - kfree(channel_info_arr[i]); - i++; - } - - kfree(channel_info_arr); - - hdev->hl_chip_info->info = NULL; + hl_hwmon_release_resources(hdev); } static void goya_set_pci_memory_regions(struct hl_device *hdev) @@ -1040,6 +1025,7 @@ static int goya_sw_init(struct hl_device *hdev) hdev->asic_prop.supports_compute_reset = true; hdev->asic_prop.allow_inference_soft_reset = true; hdev->supports_wait_for_multi_cs = false; + hdev->supports_ctx_switch = true; hdev->asic_funcs->set_pci_memory_regions(hdev); @@ -4559,7 +4545,7 @@ static int goya_unmask_irq_arr(struct hl_device *hdev, u32 *irq_arr, return rc; } -static int goya_non_hard_reset_late_init(struct hl_device *hdev) +static int goya_compute_reset_late_init(struct hl_device *hdev) { /* * Unmask all IRQs since some could have been received @@ -5137,8 +5123,8 @@ int goya_cpucp_info_get(struct hl_device *hdev) return 0; } -static bool goya_is_device_idle(struct hl_device *hdev, u64 *mask_arr, - u8 mask_len, struct seq_file *s) +static bool goya_is_device_idle(struct hl_device *hdev, u64 *mask_arr, u8 mask_len, + struct engines_data *e) { const char *fmt = "%-5d%-9s%#-14x%#-16x%#x\n"; const char *dma_fmt = "%-5d%-9s%#-14x%#x\n"; @@ -5149,9 +5135,9 @@ static bool goya_is_device_idle(struct hl_device *hdev, u64 *mask_arr, u64 offset; int i; - if (s) - seq_puts(s, "\nDMA is_idle QM_GLBL_STS0 DMA_CORE_STS0\n" - "--- ------- ------------ -------------\n"); + if (e) + hl_engine_data_sprintf(e, "\nDMA is_idle QM_GLBL_STS0 DMA_CORE_STS0\n" + "--- ------- ------------ -------------\n"); offset = mmDMA_QM_1_GLBL_STS0 - mmDMA_QM_0_GLBL_STS0; @@ -5164,13 +5150,13 @@ static bool goya_is_device_idle(struct hl_device *hdev, u64 *mask_arr, if (mask && !is_eng_idle) set_bit(GOYA_ENGINE_ID_DMA_0 + i, mask); - if (s) - seq_printf(s, dma_fmt, i, is_eng_idle ? "Y" : "N", + if (e) + hl_engine_data_sprintf(e, dma_fmt, i, is_eng_idle ? "Y" : "N", qm_glbl_sts0, dma_core_sts0); } - if (s) - seq_puts(s, + if (e) + hl_engine_data_sprintf(e, "\nTPC is_idle QM_GLBL_STS0 CMDQ_GLBL_STS0 CFG_STATUS\n" "--- ------- ------------ -------------- ----------\n"); @@ -5187,13 +5173,13 @@ static bool goya_is_device_idle(struct hl_device *hdev, u64 *mask_arr, if (mask && !is_eng_idle) set_bit(GOYA_ENGINE_ID_TPC_0 + i, mask); - if (s) - seq_printf(s, fmt, i, is_eng_idle ? "Y" : "N", + if (e) + hl_engine_data_sprintf(e, fmt, i, is_eng_idle ? "Y" : "N", qm_glbl_sts0, cmdq_glbl_sts0, tpc_cfg_sts); } - if (s) - seq_puts(s, + if (e) + hl_engine_data_sprintf(e, "\nMME is_idle QM_GLBL_STS0 CMDQ_GLBL_STS0 ARCH_STATUS\n" "--- ------- ------------ -------------- -----------\n"); @@ -5207,10 +5193,10 @@ static bool goya_is_device_idle(struct hl_device *hdev, u64 *mask_arr, if (mask && !is_eng_idle) set_bit(GOYA_ENGINE_ID_MME_0, mask); - if (s) { - seq_printf(s, fmt, 0, is_eng_idle ? "Y" : "N", qm_glbl_sts0, + if (e) { + hl_engine_data_sprintf(e, fmt, 0, is_eng_idle ? "Y" : "N", qm_glbl_sts0, cmdq_glbl_sts0, mme_arch_sts); - seq_puts(s, "\n"); + hl_engine_data_sprintf(e, "\n"); } return is_idle; @@ -5434,6 +5420,11 @@ static int goya_scrub_device_dram(struct hl_device *hdev, u64 val) return -EOPNOTSUPP; } +static int goya_send_device_activity(struct hl_device *hdev, bool open) +{ + return 0; +} + static const struct hl_asic_funcs goya_funcs = { .early_init = goya_early_init, .early_fini = goya_early_fini, @@ -5478,11 +5469,9 @@ static const struct hl_asic_funcs goya_funcs = { .send_heartbeat = goya_send_heartbeat, .debug_coresight = goya_debug_coresight, .is_device_idle = goya_is_device_idle, - .non_hard_reset_late_init = goya_non_hard_reset_late_init, + .compute_reset_late_init = goya_compute_reset_late_init, .hw_queues_lock = goya_hw_queues_lock, .hw_queues_unlock = goya_hw_queues_unlock, - .kdma_lock = NULL, - .kdma_unlock = NULL, .get_pci_id = goya_get_pci_id, .get_eeprom_data = goya_get_eeprom_data, .get_monitor_dump = goya_get_monitor_dump, @@ -5528,6 +5517,7 @@ static const struct hl_asic_funcs goya_funcs = { .mmu_get_real_page_size = hl_mmu_get_real_page_size, .access_dev_mem = hl_access_dev_mem, .set_dram_bar_base = goya_set_ddr_bar_base, + .send_device_activity = goya_send_device_activity, }; /* diff --git a/drivers/misc/habanalabs/include/common/cpucp_if.h b/drivers/misc/habanalabs/include/common/cpucp_if.h index abf40e1c4965..baa5aa43b6f4 100644 --- a/drivers/misc/habanalabs/include/common/cpucp_if.h +++ b/drivers/misc/habanalabs/include/common/cpucp_if.h @@ -629,6 +629,12 @@ enum pq_init_status { * CPUCP_PACKET_ENGINE_CORE_ASID_SET - * Packet to perform engine core ASID configuration * + * CPUCP_PACKET_SEC_ATTEST_GET - + * Get the attestaion data that is collected during various stages of the + * boot sequence. the attestation data is also hashed with some unique + * number (nonce) provided by the host to prevent replay attacks. + * public key and certificate also provided as part of the FW response. + * * CPUCP_PACKET_MONITOR_DUMP_GET - * Get monitors registers dump from the CpuCP kernel. * The CPU will put the registers dump in the a buffer allocated by the driver @@ -636,6 +642,10 @@ enum pq_init_status { * passes the max size it allows the CpuCP to write to the structure, to prevent * data corruption in case of mismatched driver/FW versions. * Relevant only to Gaudi. + * + * CPUCP_PACKET_ACTIVE_STATUS_SET - + * LKD sends FW indication whether device is free or in use, this indication is reported + * also to the BMC. */ enum cpucp_packet_id { @@ -687,10 +697,17 @@ enum cpucp_packet_id { CPUCP_PACKET_RESERVED, /* not used */ CPUCP_PACKET_ENGINE_CORE_ASID_SET, /* internal */ CPUCP_PACKET_RESERVED2, /* not used */ + CPUCP_PACKET_SEC_ATTEST_GET, /* internal */ CPUCP_PACKET_RESERVED3, /* not used */ CPUCP_PACKET_RESERVED4, /* not used */ - CPUCP_PACKET_RESERVED5, /* not used */ CPUCP_PACKET_MONITOR_DUMP_GET, /* debugfs */ + CPUCP_PACKET_RESERVED5, /* not used */ + CPUCP_PACKET_RESERVED6, /* not used */ + CPUCP_PACKET_RESERVED7, /* not used */ + CPUCP_PACKET_RESERVED8, /* not used */ + CPUCP_PACKET_RESERVED9, /* not used */ + CPUCP_PACKET_ACTIVE_STATUS_SET, /* internal */ + CPUCP_PACKET_ID_MAX /* must be last */ }; #define CPUCP_PACKET_FENCE_VAL 0xFE8CE7A5 @@ -783,6 +800,9 @@ struct cpucp_packet { * result cannot be used to hold general purpose data. */ __le32 status_mask; + + /* random, used once number, for security packets */ + __le32 nonce; }; /* For NIC requests */ @@ -813,10 +833,25 @@ enum cpucp_led_index { CPUCP_LED2_INDEX }; +/* + * enum cpucp_packet_rc - Error return code + * @cpucp_packet_success -> in case of success. + * @cpucp_packet_invalid -> this is to support Goya and Gaudi platform. + * @cpucp_packet_fault -> in case of processing error like failing to + * get device binding or semaphore etc. + * @cpucp_packet_invalid_pkt -> when cpucp packet is un-supported. This is + * supported Greco onwards. + * @cpucp_packet_invalid_params -> when checking parameter like length of buffer + * or attribute value etc. Supported Greco onwards. + * @cpucp_packet_rc_max -> It indicates size of enum so should be at last. + */ enum cpucp_packet_rc { cpucp_packet_success, cpucp_packet_invalid, - cpucp_packet_fault + cpucp_packet_fault, + cpucp_packet_invalid_pkt, + cpucp_packet_invalid_params, + cpucp_packet_rc_max }; /* @@ -1193,6 +1228,70 @@ enum cpu_reset_status { CPU_RST_STATUS_SOFT_RST_DONE = 1, }; +#define SEC_PCR_DATA_BUF_SZ 256 +#define SEC_PCR_QUOTE_BUF_SZ 510 /* (512 - 2) 2 bytes used for size */ +#define SEC_SIGNATURE_BUF_SZ 255 /* (256 - 1) 1 byte used for size */ +#define SEC_PUB_DATA_BUF_SZ 510 /* (512 - 2) 2 bytes used for size */ +#define SEC_CERTIFICATE_BUF_SZ 2046 /* (2048 - 2) 2 bytes used for size */ + +/* + * struct cpucp_sec_attest_info - attestation report of the boot + * @pcr_data: raw values of the PCR registers + * @pcr_num_reg: number of PCR registers in the pcr_data array + * @pcr_reg_len: length of each PCR register in the pcr_data array (bytes) + * @nonce: number only used once. random number provided by host. this also + * passed to the quote command as a qualifying data. + * @pcr_quote_len: length of the attestation quote data (bytes) + * @pcr_quote: attestation report data structure + * @quote_sig_len: length of the attestation report signature (bytes) + * @quote_sig: signature structure of the attestation report + * @pub_data_len: length of the public data (bytes) + * @public_data: public key for the signed attestation + * (outPublic + name + qualifiedName) + * @certificate_len: length of the certificate (bytes) + * @certificate: certificate for the attestation signing key + */ +struct cpucp_sec_attest_info { + __u8 pcr_data[SEC_PCR_DATA_BUF_SZ]; + __u8 pcr_num_reg; + __u8 pcr_reg_len; + __le16 pad0; + __le32 nonce; + __le16 pcr_quote_len; + __u8 pcr_quote[SEC_PCR_QUOTE_BUF_SZ]; + __u8 quote_sig_len; + __u8 quote_sig[SEC_SIGNATURE_BUF_SZ]; + __le16 pub_data_len; + __u8 public_data[SEC_PUB_DATA_BUF_SZ]; + __le16 certificate_len; + __u8 certificate[SEC_CERTIFICATE_BUF_SZ]; +}; + +/* + * struct cpucp_dev_info_signed - device information signed by a secured device + * @info: device information structure as defined above + * @nonce: number only used once. random number provided by host. this number is + * hashed and signed along with the device information. + * @info_sig_len: length of the attestation signature (bytes) + * @info_sig: signature of the info + nonce data. + * @pub_data_len: length of the public data (bytes) + * @public_data: public key info signed info data + * (outPublic + name + qualifiedName) + * @certificate_len: length of the certificate (bytes) + * @certificate: certificate for the signing key + */ +struct cpucp_dev_info_signed { + struct cpucp_info info; /* assumed to be 64bit aligned */ + __le32 nonce; + __le32 pad0; + __u8 info_sig_len; + __u8 info_sig[SEC_SIGNATURE_BUF_SZ]; + __le16 pub_data_len; + __u8 public_data[SEC_PUB_DATA_BUF_SZ]; + __le16 certificate_len; + __u8 certificate[SEC_CERTIFICATE_BUF_SZ]; +}; + /* * struct dcore_monitor_regs_data - DCORE monitor regs data. * the structure follows sync manager block layout. relevant only to Gaudi. diff --git a/drivers/misc/habanalabs/include/common/hl_boot_if.h b/drivers/misc/habanalabs/include/common/hl_boot_if.h index a3594119bc51..e0ea51cc7475 100644 --- a/drivers/misc/habanalabs/include/common/hl_boot_if.h +++ b/drivers/misc/habanalabs/include/common/hl_boot_if.h @@ -34,6 +34,7 @@ enum cpu_boot_err { CPU_BOOT_ERR_BINNING_FAIL = 19, CPU_BOOT_ERR_TPM_FAIL = 20, CPU_BOOT_ERR_TMP_THRESH_INIT_FAIL = 21, + CPU_BOOT_ERR_EEPROM_FAIL = 22, CPU_BOOT_ERR_ENABLED = 31, CPU_BOOT_ERR_SCND_EN = 63, CPU_BOOT_ERR_LAST = 64 /* we have 2 registers of 32 bits */ @@ -115,6 +116,9 @@ enum cpu_boot_err { * CPU_BOOT_ERR0_TMP_THRESH_INIT_FAIL Failed to set threshold for tmperature * sensor. * + * CPU_BOOT_ERR_EEPROM_FAIL Failed reading EEPROM data. Defaults + * are used. + * * CPU_BOOT_ERR0_ENABLED Error registers enabled. * This is a main indication that the * running FW populates the error @@ -139,6 +143,7 @@ enum cpu_boot_err { #define CPU_BOOT_ERR0_BINNING_FAIL (1 << CPU_BOOT_ERR_BINNING_FAIL) #define CPU_BOOT_ERR0_TPM_FAIL (1 << CPU_BOOT_ERR_TPM_FAIL) #define CPU_BOOT_ERR0_TMP_THRESH_INIT_FAIL (1 << CPU_BOOT_ERR_TMP_THRESH_INIT_FAIL) +#define CPU_BOOT_ERR0_EEPROM_FAIL (1 << CPU_BOOT_ERR_EEPROM_FAIL) #define CPU_BOOT_ERR0_ENABLED (1 << CPU_BOOT_ERR_ENABLED) #define CPU_BOOT_ERR1_ENABLED (1 << CPU_BOOT_ERR_ENABLED) @@ -426,7 +431,9 @@ struct cpu_dyn_regs { __le32 gic_host_ints_irq; __le32 gic_host_soft_rst_irq; __le32 gic_rot_qm_irq_ctrl; - __le32 reserved1[22]; /* reserve for future use */ + __le32 cpu_rst_status; + __le32 eng_arc_irq_ctrl; + __le32 reserved1[20]; /* reserve for future use */ }; /* TODO: remove the desc magic after the code is updated to use message */ @@ -465,6 +472,26 @@ enum comms_msg_type { HL_COMMS_BINNING_CONF_TYPE = 3, }; +/* + * Binning information shared between LKD and FW + * @tpc_mask - TPC binning information + * @dec_mask - Decoder binning information + * @hbm_mask - HBM binning information + * @edma_mask - EDMA binning information + * @mme_mask_l - MME binning information lower 32 + * @mme_mask_h - MME binning information upper 32 + * @reserved - reserved field for 64 bit alignment + */ +struct lkd_fw_binning_info { + __le64 tpc_mask; + __le32 dec_mask; + __le32 hbm_mask; + __le32 edma_mask; + __le32 mme_mask_l; + __le32 mme_mask_h; + __le32 reserved; +}; + /* TODO: remove this struct after the code is updated to use message */ /* this is the comms descriptor header - meta data */ struct comms_desc_header { @@ -525,13 +552,7 @@ struct lkd_fw_comms_msg { struct { __u8 fw_cfg_skip; /* 1 - skip, 0 - don't skip */ }; - struct { - __le64 tpc_binning_conf; - __le32 dec_binning_conf; - __le32 hbm_binning_conf; - __le32 edma_binning_conf; - __le32 mme_redundancy_conf; /* use MME_REDUNDANT_COLUMN */ - }; + struct lkd_fw_binning_info binning_info; }; }; diff --git a/drivers/misc/habanalabs/include/gaudi2/asic_reg/gaudi2_regs.h b/drivers/misc/habanalabs/include/gaudi2/asic_reg/gaudi2_regs.h index d0e2c68a639f..6aa1b1412462 100644 --- a/drivers/misc/habanalabs/include/gaudi2/asic_reg/gaudi2_regs.h +++ b/drivers/misc/habanalabs/include/gaudi2/asic_reg/gaudi2_regs.h @@ -132,6 +132,7 @@ #include "dcore0_mme_ctrl_lo_arch_tensor_a_regs.h" #include "dcore0_mme_ctrl_lo_arch_tensor_b_regs.h" #include "dcore0_mme_ctrl_lo_arch_tensor_cout_regs.h" +#include "pcie_wrap_special_regs.h" #include "pdma0_qm_masks.h" #include "pdma0_core_masks.h" @@ -239,6 +240,7 @@ #define SFT_IF_RTR_OFFSET (mmSFT0_HBW_RTR_IF1_RTR_H3_BASE - mmSFT0_HBW_RTR_IF0_RTR_H3_BASE) #define ARC_HALT_REQ_OFFSET (mmARC_FARM_ARC0_AUX_RUN_HALT_REQ - mmARC_FARM_ARC0_AUX_BASE) +#define ARC_HALT_ACK_OFFSET (mmARC_FARM_ARC0_AUX_RUN_HALT_ACK - mmARC_FARM_ARC0_AUX_BASE) #define ARC_REGION_CFG_OFFSET(region) \ (mmARC_FARM_ARC0_AUX_ARC_REGION_CFG_0 + (region * 4) - mmARC_FARM_ARC0_AUX_BASE) diff --git a/drivers/misc/habanalabs/include/gaudi2/asic_reg/pcie_wrap_special_regs.h b/drivers/misc/habanalabs/include/gaudi2/asic_reg/pcie_wrap_special_regs.h new file mode 100644 index 000000000000..46558e7a7f63 --- /dev/null +++ b/drivers/misc/habanalabs/include/gaudi2/asic_reg/pcie_wrap_special_regs.h @@ -0,0 +1,185 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * Copyright 2016-2020 HabanaLabs, Ltd. + * All Rights Reserved. + * + */ + +/************************************ + ** This is an auto-generated file ** + ** DO NOT EDIT BELOW ** + ************************************/ + +#ifndef ASIC_REG_PCIE_WRAP_SPECIAL_REGS_H_ +#define ASIC_REG_PCIE_WRAP_SPECIAL_REGS_H_ + +/* + ***************************************** + * PCIE_WRAP_SPECIAL + * (Prototype: SPECIAL_REGS) + ***************************************** + */ + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_0 0x4C01E80 + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_1 0x4C01E84 + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_2 0x4C01E88 + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_3 0x4C01E8C + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_4 0x4C01E90 + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_5 0x4C01E94 + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_6 0x4C01E98 + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_7 0x4C01E9C + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_8 0x4C01EA0 + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_9 0x4C01EA4 + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_10 0x4C01EA8 + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_11 0x4C01EAC + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_12 0x4C01EB0 + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_13 0x4C01EB4 + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_14 0x4C01EB8 + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_15 0x4C01EBC + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_16 0x4C01EC0 + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_17 0x4C01EC4 + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_18 0x4C01EC8 + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_19 0x4C01ECC + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_20 0x4C01ED0 + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_21 0x4C01ED4 + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_22 0x4C01ED8 + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_23 0x4C01EDC + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_24 0x4C01EE0 + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_25 0x4C01EE4 + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_26 0x4C01EE8 + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_27 0x4C01EEC + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_28 0x4C01EF0 + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_29 0x4C01EF4 + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_30 0x4C01EF8 + +#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_31 0x4C01EFC + +#define mmPCIE_WRAP_SPECIAL_MEM_GW_DATA 0x4C01F00 + +#define mmPCIE_WRAP_SPECIAL_MEM_GW_REQ 0x4C01F04 + +#define mmPCIE_WRAP_SPECIAL_MEM_NUMOF 0x4C01F0C + +#define mmPCIE_WRAP_SPECIAL_MEM_ECC_SEL 0x4C01F10 + +#define mmPCIE_WRAP_SPECIAL_MEM_ECC_CTL 0x4C01F14 + +#define mmPCIE_WRAP_SPECIAL_MEM_ECC_ERR_MASK 0x4C01F18 + +#define mmPCIE_WRAP_SPECIAL_MEM_ECC_GLBL_ERR_MASK 0x4C01F1C + +#define mmPCIE_WRAP_SPECIAL_MEM_ECC_ERR_STS 0x4C01F20 + +#define mmPCIE_WRAP_SPECIAL_MEM_ECC_ERR_ADDR 0x4C01F24 + +#define mmPCIE_WRAP_SPECIAL_MEM_RM 0x4C01F28 + +#define mmPCIE_WRAP_SPECIAL_GLBL_ERR_MASK 0x4C01F40 + +#define mmPCIE_WRAP_SPECIAL_GLBL_ERR_ADDR 0x4C01F44 + +#define mmPCIE_WRAP_SPECIAL_GLBL_ERR_CAUSE 0x4C01F48 + +#define mmPCIE_WRAP_SPECIAL_GLBL_SPARE_0 0x4C01F60 + +#define mmPCIE_WRAP_SPECIAL_GLBL_SPARE_1 0x4C01F64 + +#define mmPCIE_WRAP_SPECIAL_GLBL_SPARE_2 0x4C01F68 + +#define mmPCIE_WRAP_SPECIAL_GLBL_SPARE_3 0x4C01F6C + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_0 0x4C01F80 + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_1 0x4C01F84 + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_2 0x4C01F88 + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_3 0x4C01F8C + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_4 0x4C01F90 + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_5 0x4C01F94 + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_6 0x4C01F98 + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_7 0x4C01F9C + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_8 0x4C01FA0 + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_9 0x4C01FA4 + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_10 0x4C01FA8 + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_11 0x4C01FAC + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_12 0x4C01FB0 + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_13 0x4C01FB4 + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_14 0x4C01FB8 + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_15 0x4C01FBC + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_16 0x4C01FC0 + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_17 0x4C01FC4 + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_18 0x4C01FC8 + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_19 0x4C01FCC + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_20 0x4C01FD0 + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_21 0x4C01FD4 + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_22 0x4C01FD8 + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_23 0x4C01FDC + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_24 0x4C01FE0 + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_25 0x4C01FE4 + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_26 0x4C01FE8 + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_27 0x4C01FEC + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_28 0x4C01FF0 + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_29 0x4C01FF4 + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_30 0x4C01FF8 + +#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_31 0x4C01FFC + +#endif /* ASIC_REG_PCIE_WRAP_SPECIAL_REGS_H_ */ diff --git a/drivers/misc/habanalabs/include/gaudi2/gaudi2_async_virt_events.h b/drivers/misc/habanalabs/include/gaudi2/gaudi2_async_virt_events.h deleted file mode 100644 index 6d6ed7838a64..000000000000 --- a/drivers/misc/habanalabs/include/gaudi2/gaudi2_async_virt_events.h +++ /dev/null @@ -1,57 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 - * - * Copyright 2022 HabanaLabs, Ltd. - * All Rights Reserved. - * - */ - -#ifndef __GAUDI2_ASYNC_VIRT_EVENTS_H_ -#define __GAUDI2_ASYNC_VIRT_EVENTS_H_ - -enum gaudi2_async_virt_event_id { - GAUDI2_EVENT_NIC3_QM1_OLD = 1206, - GAUDI2_EVENT_NIC4_QM0_OLD = 1207, - GAUDI2_EVENT_NIC4_QM1_OLD = 1208, - GAUDI2_EVENT_NIC5_QM0_OLD = 1209, - GAUDI2_EVENT_NIC5_QM1_OLD = 1210, - GAUDI2_EVENT_NIC6_QM0_OLD = 1211, - GAUDI2_EVENT_NIC6_QM1_OLD = 1212, - GAUDI2_EVENT_NIC7_QM0_OLD = 1213, - GAUDI2_EVENT_NIC7_QM1_OLD = 1214, - GAUDI2_EVENT_NIC8_QM0_OLD = 1215, - GAUDI2_EVENT_NIC8_QM1_OLD = 1216, - GAUDI2_EVENT_NIC9_QM0_OLD = 1217, - GAUDI2_EVENT_NIC9_QM1_OLD = 1218, - GAUDI2_EVENT_NIC10_QM0_OLD = 1219, - GAUDI2_EVENT_NIC10_QM1_OLD = 1220, - GAUDI2_EVENT_NIC11_QM0_OLD = 1221, - GAUDI2_EVENT_NIC11_QM1_OLD = 1222, - GAUDI2_EVENT_CPU_PKT_SANITY_FAILED_OLD = 1223, - GAUDI2_EVENT_CPU0_STATUS_NIC0_ENG0_OLD = 1224, - GAUDI2_EVENT_CPU0_STATUS_NIC0_ENG1_OLD = 1225, - GAUDI2_EVENT_CPU1_STATUS_NIC1_ENG0_OLD = 1226, - GAUDI2_EVENT_CPU1_STATUS_NIC1_ENG1_OLD = 1227, - GAUDI2_EVENT_CPU2_STATUS_NIC2_ENG0_OLD = 1228, - GAUDI2_EVENT_CPU2_STATUS_NIC2_ENG1_OLD = 1229, - GAUDI2_EVENT_CPU3_STATUS_NIC3_ENG0_OLD = 1230, - GAUDI2_EVENT_CPU3_STATUS_NIC3_ENG1_OLD = 1231, - GAUDI2_EVENT_CPU4_STATUS_NIC4_ENG0_OLD = 1232, - GAUDI2_EVENT_CPU4_STATUS_NIC4_ENG1_OLD = 1233, - GAUDI2_EVENT_CPU5_STATUS_NIC5_ENG0_OLD = 1234, - GAUDI2_EVENT_CPU5_STATUS_NIC5_ENG1_OLD = 1235, - GAUDI2_EVENT_CPU6_STATUS_NIC6_ENG0_OLD = 1236, - GAUDI2_EVENT_CPU6_STATUS_NIC6_ENG1_OLD = 1237, - GAUDI2_EVENT_CPU7_STATUS_NIC7_ENG0_OLD = 1238, - GAUDI2_EVENT_CPU7_STATUS_NIC7_ENG1_OLD = 1239, - GAUDI2_EVENT_CPU8_STATUS_NIC8_ENG0_OLD = 1240, - GAUDI2_EVENT_CPU8_STATUS_NIC8_ENG1_OLD = 1241, - GAUDI2_EVENT_CPU9_STATUS_NIC9_ENG0_OLD = 1242, - GAUDI2_EVENT_CPU9_STATUS_NIC9_ENG1_OLD = 1243, - GAUDI2_EVENT_CPU10_STATUS_NIC10_ENG0_OLD = 1244, - GAUDI2_EVENT_CPU10_STATUS_NIC10_ENG1_OLD = 1245, - GAUDI2_EVENT_CPU11_STATUS_NIC11_ENG0_OLD = 1246, - GAUDI2_EVENT_CPU11_STATUS_NIC11_ENG1_OLD = 1247, - GAUDI2_EVENT_ARC_DCCM_FULL_OLD = 1248, -}; - -#endif /* __GAUDI2_ASYNC_VIRT_EVENTS_H_ */ diff --git a/drivers/misc/ics932s401.c b/drivers/misc/ics932s401.c index 2c4bb6d6e1a0..1cb71df966a4 100644 --- a/drivers/misc/ics932s401.c +++ b/drivers/misc/ics932s401.c @@ -424,7 +424,7 @@ static int ics932s401_detect(struct i2c_client *client, if (revision != ICS932S401_REV) dev_info(&adapter->dev, "Unknown revision %d\n", revision); - strlcpy(info->type, "ics932s401", I2C_NAME_SIZE); + strscpy(info->type, "ics932s401", I2C_NAME_SIZE); return 0; } diff --git a/drivers/misc/mchp_pci1xxxx/Kconfig b/drivers/misc/mchp_pci1xxxx/Kconfig new file mode 100644 index 000000000000..4abb47de7219 --- /dev/null +++ b/drivers/misc/mchp_pci1xxxx/Kconfig @@ -0,0 +1,13 @@ +config GP_PCI1XXXX + tristate "Microchip PCI1XXXX PCIe to GPIO Expander + OTP/EEPROM manager" + depends on PCI + depends on GPIOLIB + select GPIOLIB_IRQCHIP + select AUXILIARY_BUS + help + PCI1XXXX is a PCIe GEN 3 switch with one of the endpoints having + multiple functions and one of the functions is a GPIO controller + which also has registers to interface with the OTP and EEPROM. + Select yes, no or module here to include or exclude the driver + for the GPIO function. + diff --git a/drivers/misc/mchp_pci1xxxx/Makefile b/drivers/misc/mchp_pci1xxxx/Makefile new file mode 100644 index 000000000000..fc4615cfe28b --- /dev/null +++ b/drivers/misc/mchp_pci1xxxx/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_GP_PCI1XXXX) := mchp_pci1xxxx_gp.o mchp_pci1xxxx_gpio.o diff --git a/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c b/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c new file mode 100644 index 000000000000..32af2b14ff34 --- /dev/null +++ b/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2022 Microchip Technology Inc. + +#include <linux/mfd/core.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/spinlock.h> +#include <linux/gpio/driver.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/idr.h> +#include "mchp_pci1xxxx_gp.h" + +struct aux_bus_device { + struct auxiliary_device_wrapper *aux_device_wrapper[2]; +}; + +static DEFINE_IDA(gp_client_ida); +static const char aux_dev_otp_e2p_name[15] = "gp_otp_e2p"; +static const char aux_dev_gpio_name[15] = "gp_gpio"; + +static void gp_auxiliary_device_release(struct device *dev) +{ + struct auxiliary_device_wrapper *aux_device_wrapper = + (struct auxiliary_device_wrapper *)container_of(dev, + struct auxiliary_device_wrapper, aux_dev.dev); + + ida_free(&gp_client_ida, aux_device_wrapper->aux_dev.id); + kfree(aux_device_wrapper); +} + +static int gp_aux_bus_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct aux_bus_device *aux_bus; + int retval; + + retval = pcim_enable_device(pdev); + if (retval) + return retval; + + aux_bus = devm_kzalloc(&pdev->dev, sizeof(*aux_bus), GFP_KERNEL); + if (!aux_bus) + return -ENOMEM; + + aux_bus->aux_device_wrapper[0] = kzalloc(sizeof(*aux_bus->aux_device_wrapper[0]), + GFP_KERNEL); + if (!aux_bus->aux_device_wrapper[0]) + return -ENOMEM; + + retval = ida_alloc(&gp_client_ida, GFP_KERNEL); + if (retval < 0) + goto err_ida_alloc_0; + + aux_bus->aux_device_wrapper[0]->aux_dev.name = aux_dev_otp_e2p_name; + aux_bus->aux_device_wrapper[0]->aux_dev.dev.parent = &pdev->dev; + aux_bus->aux_device_wrapper[0]->aux_dev.dev.release = gp_auxiliary_device_release; + aux_bus->aux_device_wrapper[0]->aux_dev.id = retval; + + aux_bus->aux_device_wrapper[0]->gp_aux_data.region_start = pci_resource_start(pdev, 0); + aux_bus->aux_device_wrapper[0]->gp_aux_data.region_length = pci_resource_end(pdev, 0); + + retval = auxiliary_device_init(&aux_bus->aux_device_wrapper[0]->aux_dev); + if (retval < 0) + goto err_aux_dev_init_0; + + retval = auxiliary_device_add(&aux_bus->aux_device_wrapper[0]->aux_dev); + if (retval) + goto err_aux_dev_add_0; + + aux_bus->aux_device_wrapper[1] = kzalloc(sizeof(*aux_bus->aux_device_wrapper[1]), + GFP_KERNEL); + if (!aux_bus->aux_device_wrapper[1]) + return -ENOMEM; + + retval = ida_alloc(&gp_client_ida, GFP_KERNEL); + if (retval < 0) + goto err_ida_alloc_1; + + aux_bus->aux_device_wrapper[1]->aux_dev.name = aux_dev_gpio_name; + aux_bus->aux_device_wrapper[1]->aux_dev.dev.parent = &pdev->dev; + aux_bus->aux_device_wrapper[1]->aux_dev.dev.release = gp_auxiliary_device_release; + aux_bus->aux_device_wrapper[1]->aux_dev.id = retval; + + aux_bus->aux_device_wrapper[1]->gp_aux_data.region_start = pci_resource_start(pdev, 0); + aux_bus->aux_device_wrapper[1]->gp_aux_data.region_length = pci_resource_end(pdev, 0); + + retval = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES); + + if (retval < 0) + goto err_aux_dev_init_1; + + retval = pci_irq_vector(pdev, 0); + if (retval < 0) + goto err_aux_dev_init_1; + + pdev->irq = retval; + aux_bus->aux_device_wrapper[1]->gp_aux_data.irq_num = pdev->irq; + + retval = auxiliary_device_init(&aux_bus->aux_device_wrapper[1]->aux_dev); + if (retval < 0) + goto err_aux_dev_init_1; + + retval = auxiliary_device_add(&aux_bus->aux_device_wrapper[1]->aux_dev); + if (retval) + goto err_aux_dev_add_1; + + pci_set_drvdata(pdev, aux_bus); + pci_set_master(pdev); + + return 0; + +err_aux_dev_add_1: + auxiliary_device_uninit(&aux_bus->aux_device_wrapper[1]->aux_dev); + +err_aux_dev_init_1: + ida_free(&gp_client_ida, aux_bus->aux_device_wrapper[1]->aux_dev.id); + +err_ida_alloc_1: + kfree(aux_bus->aux_device_wrapper[1]); + +err_aux_dev_add_0: + auxiliary_device_uninit(&aux_bus->aux_device_wrapper[0]->aux_dev); + +err_aux_dev_init_0: + ida_free(&gp_client_ida, aux_bus->aux_device_wrapper[0]->aux_dev.id); + +err_ida_alloc_0: + kfree(aux_bus->aux_device_wrapper[0]); + + return retval; +} + +static void gp_aux_bus_remove(struct pci_dev *pdev) +{ + struct aux_bus_device *aux_bus = pci_get_drvdata(pdev); + + auxiliary_device_delete(&aux_bus->aux_device_wrapper[0]->aux_dev); + auxiliary_device_uninit(&aux_bus->aux_device_wrapper[0]->aux_dev); + auxiliary_device_delete(&aux_bus->aux_device_wrapper[1]->aux_dev); + auxiliary_device_uninit(&aux_bus->aux_device_wrapper[1]->aux_dev); +} + +static const struct pci_device_id pci1xxxx_tbl[] = { + { PCI_DEVICE(0x1055, 0xA005) }, + { PCI_DEVICE(0x1055, 0xA015) }, + { PCI_DEVICE(0x1055, 0xA025) }, + { PCI_DEVICE(0x1055, 0xA035) }, + { PCI_DEVICE(0x1055, 0xA045) }, + { PCI_DEVICE(0x1055, 0xA055) }, + {0,} +}; +MODULE_DEVICE_TABLE(pci, pci1xxxx_tbl); + +static struct pci_driver pci1xxxx_gp_driver = { + .name = "PCI1xxxxGP", + .id_table = pci1xxxx_tbl, + .probe = gp_aux_bus_probe, + .remove = gp_aux_bus_remove, +}; + +module_pci_driver(pci1xxxx_gp_driver); + +MODULE_DESCRIPTION("Microchip Technology Inc. PCI1xxxx GP expander"); +MODULE_AUTHOR("Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.h b/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.h new file mode 100644 index 000000000000..37eec73b20d7 --- /dev/null +++ b/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (C) 2022 Microchip Technology Inc. */ + +#ifndef _GPIO_PCI1XXXX_H +#define _GPIO_PCI1XXXX_H + +#include <linux/spinlock.h> +#include <linux/mutex.h> +#include <linux/kthread.h> +#include <linux/types.h> +#include <linux/auxiliary_bus.h> + +/* Perform operations like variable length write, read and write with read back for OTP / EEPROM + * Perform bit mode write in OTP + */ + +struct gp_aux_data_type { + int irq_num; + resource_size_t region_start; + resource_size_t region_length; +}; + +struct auxiliary_device_wrapper { + struct auxiliary_device aux_dev; + struct gp_aux_data_type gp_aux_data; +}; + +#endif diff --git a/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gpio.c b/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gpio.c new file mode 100644 index 000000000000..3389803cb281 --- /dev/null +++ b/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gpio.c @@ -0,0 +1,427 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2022 Microchip Technology Inc. +// pci1xxxx gpio driver + +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/gpio/driver.h> +#include <linux/bio.h> +#include <linux/mutex.h> +#include <linux/kthread.h> +#include <linux/interrupt.h> + +#include "mchp_pci1xxxx_gp.h" + +#define PCI1XXXX_NR_PINS 93 +#define PERI_GEN_RESET 0 +#define OUT_EN_OFFSET(x) ((((x) / 32) * 4) + 0x400) +#define INP_EN_OFFSET(x) ((((x) / 32) * 4) + 0x400 + 0x10) +#define OUT_OFFSET(x) ((((x) / 32) * 4) + 0x400 + 0x20) +#define INP_OFFSET(x) ((((x) / 32) * 4) + 0x400 + 0x30) +#define PULLUP_OFFSET(x) ((((x) / 32) * 4) + 0x400 + 0x40) +#define PULLDOWN_OFFSET(x) ((((x) / 32) * 4) + 0x400 + 0x50) +#define OPENDRAIN_OFFSET(x) ((((x) / 32) * 4) + 0x400 + 0x60) +#define WAKEMASK_OFFSET(x) ((((x) / 32) * 4) + 0x400 + 0x70) +#define MODE_OFFSET(x) ((((x) / 32) * 4) + 0x400 + 0x80) +#define INTR_LO_TO_HI_EDGE_CONFIG(x) ((((x) / 32) * 4) + 0x400 + 0x90) +#define INTR_HI_TO_LO_EDGE_CONFIG(x) ((((x) / 32) * 4) + 0x400 + 0xA0) +#define INTR_LEVEL_CONFIG_OFFSET(x) ((((x) / 32) * 4) + 0x400 + 0xB0) +#define INTR_LEVEL_MASK_OFFSET(x) ((((x) / 32) * 4) + 0x400 + 0xC0) +#define INTR_STAT_OFFSET(x) ((((x) / 32) * 4) + 0x400 + 0xD0) +#define DEBOUNCE_OFFSET(x) ((((x) / 32) * 4) + 0x400 + 0xE0) +#define PIO_GLOBAL_CONFIG_OFFSET (0x400 + 0xF0) +#define PIO_PCI_CTRL_REG_OFFSET (0x400 + 0xF4) +#define INTR_MASK_OFFSET(x) ((((x) / 32) * 4) + 0x400 + 0x100) +#define INTR_STATUS_OFFSET(x) (((x) * 4) + 0x400 + 0xD0) + +struct pci1xxxx_gpio { + struct auxiliary_device *aux_dev; + void __iomem *reg_base; + struct gpio_chip gpio; + spinlock_t lock; + int irq_base; +}; + +static int pci1xxxx_gpio_get_direction(struct gpio_chip *gpio, unsigned int nr) +{ + struct pci1xxxx_gpio *priv = gpiochip_get_data(gpio); + u32 data; + int ret = -EINVAL; + + data = readl(priv->reg_base + INP_EN_OFFSET(nr)); + if (data & BIT(nr % 32)) { + ret = 1; + } else { + data = readl(priv->reg_base + OUT_EN_OFFSET(nr)); + if (data & BIT(nr % 32)) + ret = 0; + } + + return ret; +} + +static inline void pci1xxx_assign_bit(void __iomem *base_addr, unsigned int reg_offset, + unsigned int bitpos, bool set) +{ + u32 data; + + data = readl(base_addr + reg_offset); + if (set) + data |= BIT(bitpos); + else + data &= ~BIT(bitpos); + writel(data, base_addr + reg_offset); +} + +static int pci1xxxx_gpio_direction_input(struct gpio_chip *gpio, unsigned int nr) +{ + struct pci1xxxx_gpio *priv = gpiochip_get_data(gpio); + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + pci1xxx_assign_bit(priv->reg_base, INP_EN_OFFSET(nr), (nr % 32), true); + pci1xxx_assign_bit(priv->reg_base, OUT_EN_OFFSET(nr), (nr % 32), false); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static int pci1xxxx_gpio_get(struct gpio_chip *gpio, unsigned int nr) +{ + struct pci1xxxx_gpio *priv = gpiochip_get_data(gpio); + + return (readl(priv->reg_base + INP_OFFSET(nr)) >> (nr % 32)) & 1; +} + +static int pci1xxxx_gpio_direction_output(struct gpio_chip *gpio, + unsigned int nr, int val) +{ + struct pci1xxxx_gpio *priv = gpiochip_get_data(gpio); + unsigned long flags; + u32 data; + + spin_lock_irqsave(&priv->lock, flags); + pci1xxx_assign_bit(priv->reg_base, INP_EN_OFFSET(nr), (nr % 32), false); + pci1xxx_assign_bit(priv->reg_base, OUT_EN_OFFSET(nr), (nr % 32), true); + data = readl(priv->reg_base + OUT_OFFSET(nr)); + if (val) + data |= (1 << (nr % 32)); + else + data &= ~(1 << (nr % 32)); + writel(data, priv->reg_base + OUT_OFFSET(nr)); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static void pci1xxxx_gpio_set(struct gpio_chip *gpio, + unsigned int nr, int val) +{ + struct pci1xxxx_gpio *priv = gpiochip_get_data(gpio); + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + pci1xxx_assign_bit(priv->reg_base, OUT_OFFSET(nr), (nr % 32), val); + spin_unlock_irqrestore(&priv->lock, flags); +} + +static int pci1xxxx_gpio_set_config(struct gpio_chip *gpio, unsigned int offset, + unsigned long config) +{ + struct pci1xxxx_gpio *priv = gpiochip_get_data(gpio); + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&priv->lock, flags); + switch (pinconf_to_config_param(config)) { + case PIN_CONFIG_BIAS_PULL_UP: + pci1xxx_assign_bit(priv->reg_base, PULLUP_OFFSET(offset), (offset % 32), true); + break; + case PIN_CONFIG_BIAS_PULL_DOWN: + pci1xxx_assign_bit(priv->reg_base, PULLDOWN_OFFSET(offset), (offset % 32), true); + break; + case PIN_CONFIG_BIAS_DISABLE: + pci1xxx_assign_bit(priv->reg_base, PULLUP_OFFSET(offset), (offset % 32), false); + pci1xxx_assign_bit(priv->reg_base, PULLDOWN_OFFSET(offset), (offset % 32), false); + break; + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + pci1xxx_assign_bit(priv->reg_base, OPENDRAIN_OFFSET(offset), (offset % 32), true); + break; + default: + ret = -EOPNOTSUPP; + break; + } + spin_unlock_irqrestore(&priv->lock, flags); + + return ret; +} + +static void pci1xxxx_gpio_irq_ack(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct pci1xxxx_gpio *priv = gpiochip_get_data(chip); + unsigned int gpio = irqd_to_hwirq(data); + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + pci1xxx_assign_bit(priv->reg_base, INTR_STAT_OFFSET(gpio), (gpio % 32), true); + spin_unlock_irqrestore(&priv->lock, flags); +} + +static void pci1xxxx_gpio_irq_set_mask(struct irq_data *data, bool set) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct pci1xxxx_gpio *priv = gpiochip_get_data(chip); + unsigned int gpio = irqd_to_hwirq(data); + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + pci1xxx_assign_bit(priv->reg_base, INTR_MASK_OFFSET(gpio), (gpio % 32), set); + spin_unlock_irqrestore(&priv->lock, flags); +} + +static void pci1xxxx_gpio_irq_mask(struct irq_data *data) +{ + pci1xxxx_gpio_irq_set_mask(data, true); +} + +static void pci1xxxx_gpio_irq_unmask(struct irq_data *data) +{ + pci1xxxx_gpio_irq_set_mask(data, false); +} + +static int pci1xxxx_gpio_set_type(struct irq_data *data, unsigned int trigger_type) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct pci1xxxx_gpio *priv = gpiochip_get_data(chip); + unsigned int gpio = irqd_to_hwirq(data); + unsigned int bitpos = gpio % 32; + + if (trigger_type & IRQ_TYPE_EDGE_FALLING) { + pci1xxx_assign_bit(priv->reg_base, INTR_HI_TO_LO_EDGE_CONFIG(gpio), + bitpos, false); + pci1xxx_assign_bit(priv->reg_base, MODE_OFFSET(gpio), + bitpos, false); + irq_set_handler_locked(data, handle_edge_irq); + } else { + pci1xxx_assign_bit(priv->reg_base, INTR_HI_TO_LO_EDGE_CONFIG(gpio), + bitpos, true); + } + + if (trigger_type & IRQ_TYPE_EDGE_RISING) { + pci1xxx_assign_bit(priv->reg_base, INTR_LO_TO_HI_EDGE_CONFIG(gpio), + bitpos, false); + pci1xxx_assign_bit(priv->reg_base, MODE_OFFSET(gpio), bitpos, + false); + irq_set_handler_locked(data, handle_edge_irq); + } else { + pci1xxx_assign_bit(priv->reg_base, INTR_LO_TO_HI_EDGE_CONFIG(gpio), + bitpos, true); + } + + if (trigger_type & IRQ_TYPE_LEVEL_LOW) { + pci1xxx_assign_bit(priv->reg_base, INTR_LEVEL_CONFIG_OFFSET(gpio), + bitpos, true); + pci1xxx_assign_bit(priv->reg_base, INTR_LEVEL_MASK_OFFSET(gpio), + bitpos, false); + pci1xxx_assign_bit(priv->reg_base, MODE_OFFSET(gpio), bitpos, + true); + irq_set_handler_locked(data, handle_edge_irq); + } + + if (trigger_type & IRQ_TYPE_LEVEL_HIGH) { + pci1xxx_assign_bit(priv->reg_base, INTR_LEVEL_CONFIG_OFFSET(gpio), + bitpos, false); + pci1xxx_assign_bit(priv->reg_base, INTR_LEVEL_MASK_OFFSET(gpio), + bitpos, false); + pci1xxx_assign_bit(priv->reg_base, MODE_OFFSET(gpio), bitpos, + true); + irq_set_handler_locked(data, handle_edge_irq); + } + + if ((!(trigger_type & IRQ_TYPE_LEVEL_LOW)) && (!(trigger_type & IRQ_TYPE_LEVEL_HIGH))) + pci1xxx_assign_bit(priv->reg_base, INTR_LEVEL_MASK_OFFSET(gpio), bitpos, true); + + return true; +} + +static irqreturn_t pci1xxxx_gpio_irq_handler(int irq, void *dev_id) +{ + struct pci1xxxx_gpio *priv = dev_id; + struct gpio_chip *gc = &priv->gpio; + unsigned long int_status = 0; + unsigned long flags; + u8 pincount; + int bit; + u8 gpiobank; + + spin_lock_irqsave(&priv->lock, flags); + pci1xxx_assign_bit(priv->reg_base, PIO_GLOBAL_CONFIG_OFFSET, 16, true); + spin_unlock_irqrestore(&priv->lock, flags); + for (gpiobank = 0; gpiobank < 3; gpiobank++) { + spin_lock_irqsave(&priv->lock, flags); + int_status = readl(priv->reg_base + INTR_STATUS_OFFSET(gpiobank)); + spin_unlock_irqrestore(&priv->lock, flags); + if (gpiobank == 2) + pincount = 29; + else + pincount = 32; + for_each_set_bit(bit, &int_status, pincount) { + unsigned int irq; + + spin_lock_irqsave(&priv->lock, flags); + writel(BIT(bit), priv->reg_base + INTR_STATUS_OFFSET(gpiobank)); + spin_unlock_irqrestore(&priv->lock, flags); + irq = irq_find_mapping(gc->irq.domain, (bit + (gpiobank * 32))); + generic_handle_irq(irq); + } + } + spin_lock_irqsave(&priv->lock, flags); + pci1xxx_assign_bit(priv->reg_base, PIO_GLOBAL_CONFIG_OFFSET, 16, false); + spin_unlock_irqrestore(&priv->lock, flags); + + return IRQ_HANDLED; +} + +static struct irq_chip pci1xxxx_gpio_irqchip = { + .name = "pci1xxxx_gpio", + .irq_ack = pci1xxxx_gpio_irq_ack, + .irq_mask = pci1xxxx_gpio_irq_mask, + .irq_unmask = pci1xxxx_gpio_irq_unmask, + .irq_set_type = pci1xxxx_gpio_set_type, +}; + +static int pci1xxxx_gpio_suspend(struct device *dev) +{ + struct pci1xxxx_gpio *priv = dev_get_drvdata(dev); + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + pci1xxx_assign_bit(priv->reg_base, PIO_GLOBAL_CONFIG_OFFSET, + 16, true); + pci1xxx_assign_bit(priv->reg_base, PIO_GLOBAL_CONFIG_OFFSET, + 17, false); + pci1xxx_assign_bit(priv->reg_base, PERI_GEN_RESET, 16, true); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static int pci1xxxx_gpio_resume(struct device *dev) +{ + struct pci1xxxx_gpio *priv = dev_get_drvdata(dev); + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + pci1xxx_assign_bit(priv->reg_base, PIO_GLOBAL_CONFIG_OFFSET, + 17, true); + pci1xxx_assign_bit(priv->reg_base, PIO_GLOBAL_CONFIG_OFFSET, + 16, false); + pci1xxx_assign_bit(priv->reg_base, PERI_GEN_RESET, 16, false); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static int pci1xxxx_gpio_setup(struct pci1xxxx_gpio *priv, int irq) +{ + struct gpio_chip *gchip = &priv->gpio; + struct gpio_irq_chip *girq; + int retval; + + gchip->label = dev_name(&priv->aux_dev->dev); + gchip->parent = &priv->aux_dev->dev; + gchip->owner = THIS_MODULE; + gchip->direction_input = pci1xxxx_gpio_direction_input; + gchip->direction_output = pci1xxxx_gpio_direction_output; + gchip->get_direction = pci1xxxx_gpio_get_direction; + gchip->get = pci1xxxx_gpio_get; + gchip->set = pci1xxxx_gpio_set; + gchip->set_config = pci1xxxx_gpio_set_config; + gchip->dbg_show = NULL; + gchip->base = -1; + gchip->ngpio = PCI1XXXX_NR_PINS; + gchip->can_sleep = false; + + retval = devm_request_threaded_irq(&priv->aux_dev->dev, irq, + NULL, pci1xxxx_gpio_irq_handler, + IRQF_ONESHOT, "PCI1xxxxGPIO", priv); + + if (retval) + return retval; + + girq = &priv->gpio.irq; + girq->chip = &pci1xxxx_gpio_irqchip; + girq->parent_handler = NULL; + girq->num_parents = 0; + girq->parents = NULL; + girq->default_type = IRQ_TYPE_NONE; + girq->handler = handle_bad_irq; + + return 0; +} + +static int pci1xxxx_gpio_probe(struct auxiliary_device *aux_dev, + const struct auxiliary_device_id *id) + +{ + struct auxiliary_device_wrapper *aux_dev_wrapper; + struct gp_aux_data_type *pdata; + struct pci1xxxx_gpio *priv; + int retval; + + aux_dev_wrapper = (struct auxiliary_device_wrapper *) + container_of(aux_dev, struct auxiliary_device_wrapper, aux_dev); + + pdata = &aux_dev_wrapper->gp_aux_data; + + if (!pdata) + return -EINVAL; + + priv = devm_kzalloc(&aux_dev->dev, sizeof(struct pci1xxxx_gpio), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + spin_lock_init(&priv->lock); + priv->aux_dev = aux_dev; + + if (!devm_request_mem_region(&aux_dev->dev, pdata->region_start, 0x800, aux_dev->name)) + return -EBUSY; + + priv->reg_base = devm_ioremap(&aux_dev->dev, pdata->region_start, 0x800); + if (!priv->reg_base) + return -ENOMEM; + + writel(0x0264, (priv->reg_base + 0x400 + 0xF0)); + + retval = pci1xxxx_gpio_setup(priv, pdata->irq_num); + + if (retval < 0) + return retval; + + dev_set_drvdata(&aux_dev->dev, priv); + + return devm_gpiochip_add_data(&aux_dev->dev, &priv->gpio, priv); +} + +static DEFINE_SIMPLE_DEV_PM_OPS(pci1xxxx_gpio_pm_ops, pci1xxxx_gpio_suspend, pci1xxxx_gpio_resume); + +static const struct auxiliary_device_id pci1xxxx_gpio_auxiliary_id_table[] = { + {.name = "mchp_pci1xxxx_gp.gp_gpio"}, + {} +}; +MODULE_DEVICE_TABLE(auxiliary, pci1xxxx_gpio_auxiliary_id_table); + +static struct auxiliary_driver pci1xxxx_gpio_driver = { + .driver = { + .name = "PCI1xxxxGPIO", + .pm = &pci1xxxx_gpio_pm_ops, + }, + .probe = pci1xxxx_gpio_probe, + .id_table = pci1xxxx_gpio_auxiliary_id_table +}; +module_auxiliary_driver(pci1xxxx_gpio_driver); + +MODULE_DESCRIPTION("Microchip Technology Inc. PCI1xxxx GPIO controller"); +MODULE_AUTHOR("Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c index 79305e4acce2..71fbf0bc8453 100644 --- a/drivers/misc/mei/bus-fixup.c +++ b/drivers/misc/mei/bus-fixup.c @@ -487,7 +487,7 @@ static void mei_nfc(struct mei_cl_device *cldev) } dev_dbg(bus->dev, "nfc radio %s\n", radio_name); - strlcpy(cldev->name, radio_name, sizeof(cldev->name)); + strscpy(cldev->name, radio_name, sizeof(cldev->name)); disconnect: mutex_lock(&bus->device_lock); diff --git a/drivers/misc/mei/gsc-me.c b/drivers/misc/mei/gsc-me.c index 75765e4df4ed..e63cabd0818d 100644 --- a/drivers/misc/mei/gsc-me.c +++ b/drivers/misc/mei/gsc-me.c @@ -68,7 +68,6 @@ static int mei_gsc_probe(struct auxiliary_device *aux_dev, hw = to_me_hw(dev); hw->mem_addr = devm_ioremap_resource(device, &adev->bar); if (IS_ERR(hw->mem_addr)) { - dev_err(device, "mmio not mapped\n"); ret = PTR_ERR(hw->mem_addr); goto err; } diff --git a/drivers/misc/mei/hw-txe.c b/drivers/misc/mei/hw-txe.c index 9862c6cd3e32..5d0f68b95c29 100644 --- a/drivers/misc/mei/hw-txe.c +++ b/drivers/misc/mei/hw-txe.c @@ -176,7 +176,7 @@ static bool mei_txe_aliveness_set(struct mei_device *dev, u32 req) * @dev: the device structure * * Extract HICR_HOST_ALIVENESS_RESP_ACK bit from - * from HICR_HOST_ALIVENESS_REQ register value + * HICR_HOST_ALIVENESS_REQ register value * * Return: SICR_HOST_ALIVENESS_REQ_REQUESTED bit value */ diff --git a/drivers/misc/ocxl/file.c b/drivers/misc/ocxl/file.c index 6777c419a8da..d46dba2df5a1 100644 --- a/drivers/misc/ocxl/file.c +++ b/drivers/misc/ocxl/file.c @@ -257,6 +257,8 @@ static long afu_ioctl(struct file *file, unsigned int cmd, if (IS_ERR(ev_ctx)) return PTR_ERR(ev_ctx); rc = ocxl_irq_set_handler(ctx, irq_id, irq_handler, irq_free, ev_ctx); + if (rc) + eventfd_ctx_put(ev_ctx); break; case OCXL_IOCTL_GET_METADATA: diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c index 8f786a225dcf..11530b4ec389 100644 --- a/drivers/misc/pci_endpoint_test.c +++ b/drivers/misc/pci_endpoint_test.c @@ -332,6 +332,22 @@ static bool pci_endpoint_test_msi_irq(struct pci_endpoint_test *test, return false; } +static int pci_endpoint_test_validate_xfer_params(struct device *dev, + struct pci_endpoint_test_xfer_param *param, size_t alignment) +{ + if (!param->size) { + dev_dbg(dev, "Data size is zero\n"); + return -EINVAL; + } + + if (param->size > SIZE_MAX - alignment) { + dev_dbg(dev, "Maximum transfer data size exceeded\n"); + return -EINVAL; + } + + return 0; +} + static bool pci_endpoint_test_copy(struct pci_endpoint_test *test, unsigned long arg) { @@ -363,9 +379,11 @@ static bool pci_endpoint_test_copy(struct pci_endpoint_test *test, return false; } + err = pci_endpoint_test_validate_xfer_params(dev, ¶m, alignment); + if (err) + return false; + size = param.size; - if (size > SIZE_MAX - alignment) - goto err; use_dma = !!(param.flags & PCITEST_FLAGS_USE_DMA); if (use_dma) @@ -497,9 +515,11 @@ static bool pci_endpoint_test_write(struct pci_endpoint_test *test, return false; } + err = pci_endpoint_test_validate_xfer_params(dev, ¶m, alignment); + if (err) + return false; + size = param.size; - if (size > SIZE_MAX - alignment) - goto err; use_dma = !!(param.flags & PCITEST_FLAGS_USE_DMA); if (use_dma) @@ -595,9 +615,11 @@ static bool pci_endpoint_test_read(struct pci_endpoint_test *test, return false; } + err = pci_endpoint_test_validate_xfer_params(dev, ¶m, alignment); + if (err) + return false; + size = param.size; - if (size > SIZE_MAX - alignment) - goto err; use_dma = !!(param.flags & PCITEST_FLAGS_USE_DMA); if (use_dma) diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h index 9f9af77f8d2e..f1336f43d3bd 100644 --- a/drivers/misc/sgi-xp/xp.h +++ b/drivers/misc/sgi-xp/xp.h @@ -334,10 +334,6 @@ extern int (*xp_cpu_to_nasid) (int); extern enum xp_retval (*xp_expand_memprotect) (unsigned long, unsigned long); extern enum xp_retval (*xp_restrict_memprotect) (unsigned long, unsigned long); -extern u64 xp_nofault_PIOR_target; -extern int xp_nofault_PIOR(void *); -extern int xp_error_PIOR(void); - extern struct device *xp; extern enum xp_retval xp_init_uv(void); extern void xp_exit_uv(void); diff --git a/drivers/misc/vmw_vmci/vmci_queue_pair.c b/drivers/misc/vmw_vmci/vmci_queue_pair.c index 8f2de1893245..e71068f7759b 100644 --- a/drivers/misc/vmw_vmci/vmci_queue_pair.c +++ b/drivers/misc/vmw_vmci/vmci_queue_pair.c @@ -324,7 +324,7 @@ static void *qp_alloc_queue(u64 size, u32 flags) /* * Copies from a given buffer or iovector to a VMCI Queue. Uses - * kmap()/kunmap() to dynamically map/unmap required portions of the queue + * kmap_local_page() to dynamically map required portions of the queue * by traversing the offset -> page translation structure for the queue. * Assumes that offset + size does not wrap around in the queue. */ @@ -345,7 +345,7 @@ static int qp_memcpy_to_queue_iter(struct vmci_queue *queue, size_t to_copy; if (kernel_if->host) - va = kmap(kernel_if->u.h.page[page_index]); + va = kmap_local_page(kernel_if->u.h.page[page_index]); else va = kernel_if->u.g.vas[page_index + 1]; /* Skip header. */ @@ -359,12 +359,12 @@ static int qp_memcpy_to_queue_iter(struct vmci_queue *queue, if (!copy_from_iter_full((u8 *)va + page_offset, to_copy, from)) { if (kernel_if->host) - kunmap(kernel_if->u.h.page[page_index]); + kunmap_local(va); return VMCI_ERROR_INVALID_ARGS; } bytes_copied += to_copy; if (kernel_if->host) - kunmap(kernel_if->u.h.page[page_index]); + kunmap_local(va); } return VMCI_SUCCESS; @@ -372,7 +372,7 @@ static int qp_memcpy_to_queue_iter(struct vmci_queue *queue, /* * Copies to a given buffer or iovector from a VMCI Queue. Uses - * kmap()/kunmap() to dynamically map/unmap required portions of the queue + * kmap_local_page() to dynamically map required portions of the queue * by traversing the offset -> page translation structure for the queue. * Assumes that offset + size does not wrap around in the queue. */ @@ -393,7 +393,7 @@ static int qp_memcpy_from_queue_iter(struct iov_iter *to, int err; if (kernel_if->host) - va = kmap(kernel_if->u.h.page[page_index]); + va = kmap_local_page(kernel_if->u.h.page[page_index]); else va = kernel_if->u.g.vas[page_index + 1]; /* Skip header. */ @@ -407,12 +407,12 @@ static int qp_memcpy_from_queue_iter(struct iov_iter *to, err = copy_to_iter((u8 *)va + page_offset, to_copy, to); if (err != to_copy) { if (kernel_if->host) - kunmap(kernel_if->u.h.page[page_index]); + kunmap_local(va); return VMCI_ERROR_INVALID_ARGS; } bytes_copied += to_copy; if (kernel_if->host) - kunmap(kernel_if->u.h.page[page_index]); + kunmap_local(va); } return VMCI_SUCCESS; diff --git a/drivers/misc/xilinx_sdfec.c b/drivers/misc/xilinx_sdfec.c index d6e3c650bd11..cb9506f9cbd0 100644 --- a/drivers/misc/xilinx_sdfec.c +++ b/drivers/misc/xilinx_sdfec.c @@ -636,7 +636,7 @@ static int xsdfec_table_write(struct xsdfec_dev *xsdfec, u32 offset, } for (i = 0; i < nr_pages; i++) { - addr = kmap(pages[i]); + addr = kmap_local_page(pages[i]); do { xsdfec_regwrite(xsdfec, base_addr + ((offset + reg) * @@ -645,6 +645,7 @@ static int xsdfec_table_write(struct xsdfec_dev *xsdfec, u32 offset, reg++; } while ((reg < len) && ((reg * XSDFEC_REG_WIDTH_JUMP) % PAGE_SIZE)); + kunmap_local(addr); unpin_user_page(pages[i]); } return 0; diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 8393319b7782..18aa54460d36 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -1218,6 +1218,34 @@ int __get_mtd_device(struct mtd_info *mtd) EXPORT_SYMBOL_GPL(__get_mtd_device); /** + * of_get_mtd_device_by_node - obtain an MTD device associated with a given node + * + * @np: device tree node + */ +struct mtd_info *of_get_mtd_device_by_node(struct device_node *np) +{ + struct mtd_info *mtd = NULL; + struct mtd_info *tmp; + int err; + + mutex_lock(&mtd_table_mutex); + + err = -EPROBE_DEFER; + mtd_for_each_device(tmp) { + if (mtd_get_of_node(tmp) == np) { + mtd = tmp; + err = __get_mtd_device(mtd); + break; + } + } + + mutex_unlock(&mtd_table_mutex); + + return err ? ERR_PTR(err) : mtd; +} +EXPORT_SYMBOL_GPL(of_get_mtd_device_by_node); + +/** * get_mtd_device_nm - obtain a validated handle for an MTD device by * device name * @name: MTD device name to open diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig index d72d879a6d34..ec8a49c04003 100644 --- a/drivers/nvmem/Kconfig +++ b/drivers/nvmem/Kconfig @@ -21,6 +21,40 @@ config NVMEM_SYSFS This interface is mostly used by userspace applications to read/write directly into nvmem. +# Devices + +config NVMEM_APPLE_EFUSES + tristate "Apple eFuse support" + depends on ARCH_APPLE || COMPILE_TEST + default ARCH_APPLE + help + Say y here to enable support for reading eFuses on Apple SoCs + such as the M1. These are e.g. used to store factory programmed + calibration data required for the PCIe or the USB-C PHY. + + This driver can also be built as a module. If so, the module will + be called nvmem-apple-efuses. + +config NVMEM_BCM_OCOTP + tristate "Broadcom On-Chip OTP Controller support" + depends on ARCH_BCM_IPROC || COMPILE_TEST + depends on HAS_IOMEM + default ARCH_BCM_IPROC + help + Say y here to enable read/write access to the Broadcom OTP + controller. + + This driver can also be built as a module. If so, the module + will be called nvmem-bcm-ocotp. + +config NVMEM_BRCM_NVRAM + tristate "Broadcom's NVRAM support" + depends on ARCH_BCM_5301X || COMPILE_TEST + depends on HAS_IOMEM + help + This driver provides support for Broadcom's NVRAM that can be accessed + using I/O mapping. + config NVMEM_IMX_IIM tristate "i.MX IC Identification Module support" depends on ARCH_MXC || COMPILE_TEST @@ -52,7 +86,7 @@ config NVMEM_IMX_OCOTP_SCU This is a driver for the SCU On-Chip OTP Controller (OCOTP) available on i.MX8 SoCs. -config JZ4780_EFUSE +config NVMEM_JZ4780_EFUSE tristate "JZ4780 EFUSE Memory Support" depends on MACH_INGENIC || COMPILE_TEST depends on HAS_IOMEM @@ -64,6 +98,27 @@ config JZ4780_EFUSE To compile this driver as a module, choose M here: the module will be called nvmem_jz4780_efuse. +config NVMEM_LAN9662_OTPC + tristate "Microchip LAN9662 OTP controller support" + depends on SOC_LAN966 || COMPILE_TEST + depends on HAS_IOMEM + help + This driver enables the OTP controller available on Microchip LAN9662 + SoCs. It controls the access to the OTP memory connected to it. + +config NVMEM_LAYERSCAPE_SFP + tristate "Layerscape SFP (Security Fuse Processor) support" + depends on ARCH_LAYERSCAPE || COMPILE_TEST + depends on HAS_IOMEM + select REGMAP_MMIO + help + This driver provides support to read the eFuses on Freescale + Layerscape SoC's. For example, the vendor provides a per part + unique ID there. + + This driver can also be built as a module. If so, the module + will be called layerscape-sfp. + config NVMEM_LPC18XX_EEPROM tristate "NXP LPC18XX EEPROM Memory Support" depends on ARCH_LPC18XX || COMPILE_TEST @@ -84,19 +139,34 @@ config NVMEM_LPC18XX_OTP To compile this driver as a module, choose M here: the module will be called nvmem_lpc18xx_otp. -config NVMEM_MXS_OCOTP - tristate "Freescale MXS On-Chip OTP Memory Support" - depends on ARCH_MXS || COMPILE_TEST - depends on HAS_IOMEM +config NVMEM_MESON_EFUSE + tristate "Amlogic Meson GX eFuse Support" + depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM help - If you say Y here, you will get readonly access to the - One Time Programmable memory pages that are stored - on the Freescale i.MX23/i.MX28 processor. + This is a driver to retrieve specific values from the eFuse found on + the Amlogic Meson GX SoCs. This driver can also be built as a module. If so, the module - will be called nvmem-mxs-ocotp. + will be called nvmem_meson_efuse. + +config NVMEM_MESON_MX_EFUSE + tristate "Amlogic Meson6/Meson8/Meson8b eFuse Support" + depends on ARCH_MESON || COMPILE_TEST + help + This is a driver to retrieve specific values from the eFuse found on + the Amlogic Meson6, Meson8 and Meson8b SoCs. -config MTK_EFUSE + This driver can also be built as a module. If so, the module + will be called nvmem_meson_mx_efuse. + +config NVMEM_MICROCHIP_OTPC + tristate "Microchip OTPC support" + depends on ARCH_AT91 || COMPILE_TEST + help + This driver enable the OTP controller available on Microchip SAMA7G5 + SoCs. It controlls the access to the OTP memory connected to it. + +config NVMEM_MTK_EFUSE tristate "Mediatek SoCs EFUSE support" depends on ARCH_MEDIATEK || COMPILE_TEST depends on HAS_IOMEM @@ -107,12 +177,17 @@ config MTK_EFUSE This driver can also be built as a module. If so, the module will be called efuse-mtk. -config MICROCHIP_OTPC - tristate "Microchip OTPC support" - depends on ARCH_AT91 || COMPILE_TEST +config NVMEM_MXS_OCOTP + tristate "Freescale MXS On-Chip OTP Memory Support" + depends on ARCH_MXS || COMPILE_TEST + depends on HAS_IOMEM help - This driver enable the OTP controller available on Microchip SAMA7G5 - SoCs. It controlls the access to the OTP memory connected to it. + If you say Y here, you will get readonly access to the + One Time Programmable memory pages that are stored + on the Freescale i.MX23/i.MX28 processor. + + This driver can also be built as a module. If so, the module + will be called nvmem-mxs-ocotp. config NVMEM_NINTENDO_OTP tristate "Nintendo Wii and Wii U OTP Support" @@ -126,7 +201,7 @@ config NVMEM_NINTENDO_OTP This driver can also be built as a module. If so, the module will be called nvmem-nintendo-otp. -config QCOM_QFPROM +config NVMEM_QCOM_QFPROM tristate "QCOM QFPROM Support" depends on ARCH_QCOM || COMPILE_TEST depends on HAS_IOMEM @@ -137,15 +212,23 @@ config QCOM_QFPROM This driver can also be built as a module. If so, the module will be called nvmem_qfprom. -config NVMEM_SPMI_SDAM - tristate "SPMI SDAM Support" - depends on SPMI +config NVMEM_RAVE_SP_EEPROM + tristate "Rave SP EEPROM Support" + depends on RAVE_SP_CORE help - This driver supports the Shared Direct Access Memory Module on - Qualcomm Technologies, Inc. PMICs. It provides the clients - an interface to read/write to the SDAM module's shared memory. + Say y here to enable Rave SP EEPROM support. + +config NVMEM_RMEM + tristate "Reserved Memory Based Driver Support" + depends on HAS_IOMEM + help + This driver maps reserved memory into an nvmem device. It might be + useful to expose information left by firmware in memory. -config ROCKCHIP_EFUSE + This driver can also be built as a module. If so, the module + will be called nvmem-rmem. + +config NVMEM_ROCKCHIP_EFUSE tristate "Rockchip eFuse Support" depends on ARCH_ROCKCHIP || COMPILE_TEST depends on HAS_IOMEM @@ -156,7 +239,7 @@ config ROCKCHIP_EFUSE This driver can also be built as a module. If so, the module will be called nvmem_rockchip_efuse. -config ROCKCHIP_OTP +config NVMEM_ROCKCHIP_OTP tristate "Rockchip OTP controller support" depends on ARCH_ROCKCHIP || COMPILE_TEST depends on HAS_IOMEM @@ -167,17 +250,45 @@ config ROCKCHIP_OTP This driver can also be built as a module. If so, the module will be called nvmem_rockchip_otp. -config NVMEM_BCM_OCOTP - tristate "Broadcom On-Chip OTP Controller support" - depends on ARCH_BCM_IPROC || COMPILE_TEST +config NVMEM_SC27XX_EFUSE + tristate "Spreadtrum SC27XX eFuse Support" + depends on MFD_SC27XX_PMIC || COMPILE_TEST depends on HAS_IOMEM - default ARCH_BCM_IPROC help - Say y here to enable read/write access to the Broadcom OTP - controller. + This is a simple driver to dump specified values of Spreadtrum + SC27XX PMICs from eFuse. This driver can also be built as a module. If so, the module - will be called nvmem-bcm-ocotp. + will be called nvmem-sc27xx-efuse. + +config NVMEM_SNVS_LPGPR + tristate "Support for Low Power General Purpose Register" + depends on ARCH_MXC || COMPILE_TEST + help + This is a driver for Low Power General Purpose Register (LPGPR) available on + i.MX6 and i.MX7 SoCs in Secure Non-Volatile Storage (SNVS) of this chip. + + This driver can also be built as a module. If so, the module + will be called nvmem-snvs-lpgpr. + +config NVMEM_SPMI_SDAM + tristate "SPMI SDAM Support" + depends on SPMI + help + This driver supports the Shared Direct Access Memory Module on + Qualcomm Technologies, Inc. PMICs. It provides the clients + an interface to read/write to the SDAM module's shared memory. + +config NVMEM_SPRD_EFUSE + tristate "Spreadtrum SoC eFuse Support" + depends on ARCH_SPRD || COMPILE_TEST + depends on HAS_IOMEM + help + This is a simple driver to dump specified values of Spreadtrum + SoCs from eFuse. + + This driver can also be built as a module. If so, the module + will be called nvmem-sprd-efuse. config NVMEM_STM32_ROMEM tristate "STMicroelectronics STM32 factory-programmed memory support" @@ -189,6 +300,18 @@ config NVMEM_STM32_ROMEM This driver can also be built as a module. If so, the module will be called nvmem-stm32-romem. +config NVMEM_SUNPLUS_OCOTP + tristate "Sunplus SoC OTP support" + depends on SOC_SP7021 || COMPILE_TEST + depends on HAS_IOMEM + help + This is a driver for the On-chip OTP controller (OCOTP) available + on Sunplus SoCs. It provides access to 128 bytes of one-time + programmable eFuse. + + This driver can also be built as a module. If so, the module + will be called nvmem-sunplus-ocotp. + config NVMEM_SUNXI_SID tristate "Allwinner SoCs SID support" depends on ARCH_SUNXI @@ -199,7 +322,20 @@ config NVMEM_SUNXI_SID This driver can also be built as a module. If so, the module will be called nvmem_sunxi_sid. -config UNIPHIER_EFUSE +config NVMEM_U_BOOT_ENV + tristate "U-Boot environment variables support" + depends on OF && MTD + select CRC32 + help + U-Boot stores its setup as environment variables. This driver adds + support for verifying & exporting such data. It also exposes variables + as NVMEM cells so they can be referenced by other drivers. + + Currently this drivers works only with env variables on top of MTD. + + If compiled as module it will be called nvmem_u-boot-env. + +config NVMEM_UNIPHIER_EFUSE tristate "UniPhier SoCs eFuse support" depends on ARCH_UNIPHIER || COMPILE_TEST depends on HAS_IOMEM @@ -221,53 +357,6 @@ config NVMEM_VF610_OCOTP This driver can also be build as a module. If so, the module will be called nvmem-vf610-ocotp. -config MESON_EFUSE - tristate "Amlogic Meson GX eFuse Support" - depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM - help - This is a driver to retrieve specific values from the eFuse found on - the Amlogic Meson GX SoCs. - - This driver can also be built as a module. If so, the module - will be called nvmem_meson_efuse. - -config MESON_MX_EFUSE - tristate "Amlogic Meson6/Meson8/Meson8b eFuse Support" - depends on ARCH_MESON || COMPILE_TEST - help - This is a driver to retrieve specific values from the eFuse found on - the Amlogic Meson6, Meson8 and Meson8b SoCs. - - This driver can also be built as a module. If so, the module - will be called nvmem_meson_mx_efuse. - -config NVMEM_SNVS_LPGPR - tristate "Support for Low Power General Purpose Register" - depends on ARCH_MXC || COMPILE_TEST - help - This is a driver for Low Power General Purpose Register (LPGPR) available on - i.MX6 and i.MX7 SoCs in Secure Non-Volatile Storage (SNVS) of this chip. - - This driver can also be built as a module. If so, the module - will be called nvmem-snvs-lpgpr. - -config RAVE_SP_EEPROM - tristate "Rave SP EEPROM Support" - depends on RAVE_SP_CORE - help - Say y here to enable Rave SP EEPROM support. - -config SC27XX_EFUSE - tristate "Spreadtrum SC27XX eFuse Support" - depends on MFD_SC27XX_PMIC || COMPILE_TEST - depends on HAS_IOMEM - help - This is a simple driver to dump specified values of Spreadtrum - SC27XX PMICs from eFuse. - - This driver can also be built as a module. If so, the module - will be called nvmem-sc27xx-efuse. - config NVMEM_ZYNQMP bool "Xilinx ZYNQMP SoC nvmem firmware support" depends on ARCH_ZYNQMP @@ -278,70 +367,4 @@ config NVMEM_ZYNQMP If sure, say yes. If unsure, say no. -config SPRD_EFUSE - tristate "Spreadtrum SoC eFuse Support" - depends on ARCH_SPRD || COMPILE_TEST - depends on HAS_IOMEM - help - This is a simple driver to dump specified values of Spreadtrum - SoCs from eFuse. - - This driver can also be built as a module. If so, the module - will be called nvmem-sprd-efuse. - -config NVMEM_RMEM - tristate "Reserved Memory Based Driver Support" - depends on HAS_IOMEM - help - This driver maps reserved memory into an nvmem device. It might be - useful to expose information left by firmware in memory. - - This driver can also be built as a module. If so, the module - will be called nvmem-rmem. - -config NVMEM_BRCM_NVRAM - tristate "Broadcom's NVRAM support" - depends on ARCH_BCM_5301X || COMPILE_TEST - depends on HAS_IOMEM - help - This driver provides support for Broadcom's NVRAM that can be accessed - using I/O mapping. - -config NVMEM_LAYERSCAPE_SFP - tristate "Layerscape SFP (Security Fuse Processor) support" - depends on ARCH_LAYERSCAPE || COMPILE_TEST - depends on HAS_IOMEM - select REGMAP_MMIO - help - This driver provides support to read the eFuses on Freescale - Layerscape SoC's. For example, the vendor provides a per part - unique ID there. - - This driver can also be built as a module. If so, the module - will be called layerscape-sfp. - -config NVMEM_SUNPLUS_OCOTP - tristate "Sunplus SoC OTP support" - depends on SOC_SP7021 || COMPILE_TEST - depends on HAS_IOMEM - help - This is a driver for the On-chip OTP controller (OCOTP) available - on Sunplus SoCs. It provides access to 128 bytes of one-time - programmable eFuse. - - This driver can also be built as a module. If so, the module - will be called nvmem-sunplus-ocotp. - -config NVMEM_APPLE_EFUSES - tristate "Apple eFuse support" - depends on ARCH_APPLE || COMPILE_TEST - default ARCH_APPLE - help - Say y here to enable support for reading eFuses on Apple SoCs - such as the M1. These are e.g. used to store factory programmed - calibration data required for the PCIe or the USB-C PHY. - - This driver can also be built as a module. If so, the module will - be called nvmem-apple-efuses. - endif diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile index c710b64f9fe4..fa80fe17e567 100644 --- a/drivers/nvmem/Makefile +++ b/drivers/nvmem/Makefile @@ -7,65 +7,69 @@ obj-$(CONFIG_NVMEM) += nvmem_core.o nvmem_core-y := core.o # Devices -obj-$(CONFIG_NVMEM_BCM_OCOTP) += nvmem-bcm-ocotp.o -nvmem-bcm-ocotp-y := bcm-ocotp.o -obj-$(CONFIG_NVMEM_IMX_IIM) += nvmem-imx-iim.o -nvmem-imx-iim-y := imx-iim.o -obj-$(CONFIG_NVMEM_IMX_OCOTP) += nvmem-imx-ocotp.o -nvmem-imx-ocotp-y := imx-ocotp.o +obj-$(CONFIG_NVMEM_APPLE_EFUSES) += nvmem-apple-efuses.o +nvmem-apple-efuses-y := apple-efuses.o +obj-$(CONFIG_NVMEM_BCM_OCOTP) += nvmem-bcm-ocotp.o +nvmem-bcm-ocotp-y := bcm-ocotp.o +obj-$(CONFIG_NVMEM_BRCM_NVRAM) += nvmem_brcm_nvram.o +nvmem_brcm_nvram-y := brcm_nvram.o +obj-$(CONFIG_NVMEM_IMX_IIM) += nvmem-imx-iim.o +nvmem-imx-iim-y := imx-iim.o +obj-$(CONFIG_NVMEM_IMX_OCOTP) += nvmem-imx-ocotp.o +nvmem-imx-ocotp-y := imx-ocotp.o obj-$(CONFIG_NVMEM_IMX_OCOTP_SCU) += nvmem-imx-ocotp-scu.o -nvmem-imx-ocotp-scu-y := imx-ocotp-scu.o -obj-$(CONFIG_JZ4780_EFUSE) += nvmem_jz4780_efuse.o -nvmem_jz4780_efuse-y := jz4780-efuse.o +nvmem-imx-ocotp-scu-y := imx-ocotp-scu.o +obj-$(CONFIG_NVMEM_JZ4780_EFUSE) += nvmem_jz4780_efuse.o +nvmem_jz4780_efuse-y := jz4780-efuse.o +obj-$(CONFIG_NVMEM_LAN9662_OTPC) += nvmem-lan9662-otpc.o +nvmem-lan9662-otpc-y := lan9662-otpc.o +obj-$(CONFIG_NVMEM_LAYERSCAPE_SFP) += nvmem-layerscape-sfp.o +nvmem-layerscape-sfp-y := layerscape-sfp.o obj-$(CONFIG_NVMEM_LPC18XX_EEPROM) += nvmem_lpc18xx_eeprom.o -nvmem_lpc18xx_eeprom-y := lpc18xx_eeprom.o -obj-$(CONFIG_NVMEM_LPC18XX_OTP) += nvmem_lpc18xx_otp.o -nvmem_lpc18xx_otp-y := lpc18xx_otp.o -obj-$(CONFIG_NVMEM_MXS_OCOTP) += nvmem-mxs-ocotp.o -nvmem-mxs-ocotp-y := mxs-ocotp.o +nvmem_lpc18xx_eeprom-y := lpc18xx_eeprom.o +obj-$(CONFIG_NVMEM_LPC18XX_OTP) += nvmem_lpc18xx_otp.o +nvmem_lpc18xx_otp-y := lpc18xx_otp.o +obj-$(CONFIG_NVMEM_MESON_EFUSE) += nvmem_meson_efuse.o +nvmem_meson_efuse-y := meson-efuse.o +obj-$(CONFIG_NVMEM_MESON_MX_EFUSE) += nvmem_meson_mx_efuse.o +nvmem_meson_mx_efuse-y := meson-mx-efuse.o +obj-$(CONFIG_NVMEM_MICROCHIP_OTPC) += nvmem-microchip-otpc.o +nvmem-microchip-otpc-y := microchip-otpc.o +obj-$(CONFIG_NVMEM_MTK_EFUSE) += nvmem_mtk-efuse.o +nvmem_mtk-efuse-y := mtk-efuse.o +obj-$(CONFIG_NVMEM_MXS_OCOTP) += nvmem-mxs-ocotp.o +nvmem-mxs-ocotp-y := mxs-ocotp.o obj-$(CONFIG_NVMEM_NINTENDO_OTP) += nvmem-nintendo-otp.o -nvmem-nintendo-otp-y := nintendo-otp.o -obj-$(CONFIG_MTK_EFUSE) += nvmem_mtk-efuse.o -nvmem_mtk-efuse-y := mtk-efuse.o -obj-$(CONFIG_QCOM_QFPROM) += nvmem_qfprom.o -nvmem_qfprom-y := qfprom.o -obj-$(CONFIG_NVMEM_SPMI_SDAM) += nvmem_qcom-spmi-sdam.o -nvmem_qcom-spmi-sdam-y += qcom-spmi-sdam.o -obj-$(CONFIG_ROCKCHIP_EFUSE) += nvmem_rockchip_efuse.o -nvmem_rockchip_efuse-y := rockchip-efuse.o -obj-$(CONFIG_ROCKCHIP_OTP) += nvmem-rockchip-otp.o -nvmem-rockchip-otp-y := rockchip-otp.o -obj-$(CONFIG_NVMEM_SUNXI_SID) += nvmem_sunxi_sid.o -nvmem_stm32_romem-y := stm32-romem.o -obj-$(CONFIG_NVMEM_STM32_ROMEM) += nvmem_stm32_romem.o -nvmem_sunxi_sid-y := sunxi_sid.o -obj-$(CONFIG_UNIPHIER_EFUSE) += nvmem-uniphier-efuse.o -nvmem-uniphier-efuse-y := uniphier-efuse.o -obj-$(CONFIG_NVMEM_VF610_OCOTP) += nvmem-vf610-ocotp.o -nvmem-vf610-ocotp-y := vf610-ocotp.o -obj-$(CONFIG_MESON_EFUSE) += nvmem_meson_efuse.o -nvmem_meson_efuse-y := meson-efuse.o -obj-$(CONFIG_MESON_MX_EFUSE) += nvmem_meson_mx_efuse.o -nvmem_meson_mx_efuse-y := meson-mx-efuse.o -obj-$(CONFIG_NVMEM_SNVS_LPGPR) += nvmem_snvs_lpgpr.o -nvmem_snvs_lpgpr-y := snvs_lpgpr.o -obj-$(CONFIG_RAVE_SP_EEPROM) += nvmem-rave-sp-eeprom.o -nvmem-rave-sp-eeprom-y := rave-sp-eeprom.o -obj-$(CONFIG_SC27XX_EFUSE) += nvmem-sc27xx-efuse.o -nvmem-sc27xx-efuse-y := sc27xx-efuse.o -obj-$(CONFIG_NVMEM_ZYNQMP) += nvmem_zynqmp_nvmem.o -nvmem_zynqmp_nvmem-y := zynqmp_nvmem.o -obj-$(CONFIG_SPRD_EFUSE) += nvmem_sprd_efuse.o -nvmem_sprd_efuse-y := sprd-efuse.o -obj-$(CONFIG_NVMEM_RMEM) += nvmem-rmem.o -nvmem-rmem-y := rmem.o -obj-$(CONFIG_NVMEM_BRCM_NVRAM) += nvmem_brcm_nvram.o -nvmem_brcm_nvram-y := brcm_nvram.o -obj-$(CONFIG_NVMEM_LAYERSCAPE_SFP) += nvmem-layerscape-sfp.o -nvmem-layerscape-sfp-y := layerscape-sfp.o +nvmem-nintendo-otp-y := nintendo-otp.o +obj-$(CONFIG_NVMEM_QCOM_QFPROM) += nvmem_qfprom.o +nvmem_qfprom-y := qfprom.o +obj-$(CONFIG_NVMEM_RAVE_SP_EEPROM) += nvmem-rave-sp-eeprom.o +nvmem-rave-sp-eeprom-y := rave-sp-eeprom.o +obj-$(CONFIG_NVMEM_RMEM) += nvmem-rmem.o +nvmem-rmem-y := rmem.o +obj-$(CONFIG_NVMEM_ROCKCHIP_EFUSE) += nvmem_rockchip_efuse.o +nvmem_rockchip_efuse-y := rockchip-efuse.o +obj-$(CONFIG_NVMEM_ROCKCHIP_OTP) += nvmem-rockchip-otp.o +nvmem-rockchip-otp-y := rockchip-otp.o +obj-$(CONFIG_NVMEM_SC27XX_EFUSE) += nvmem-sc27xx-efuse.o +nvmem-sc27xx-efuse-y := sc27xx-efuse.o +obj-$(CONFIG_NVMEM_SNVS_LPGPR) += nvmem_snvs_lpgpr.o +nvmem_snvs_lpgpr-y := snvs_lpgpr.o +obj-$(CONFIG_NVMEM_SPMI_SDAM) += nvmem_qcom-spmi-sdam.o +nvmem_qcom-spmi-sdam-y += qcom-spmi-sdam.o +obj-$(CONFIG_NVMEM_SPRD_EFUSE) += nvmem_sprd_efuse.o +nvmem_sprd_efuse-y := sprd-efuse.o +obj-$(CONFIG_NVMEM_STM32_ROMEM) += nvmem_stm32_romem.o +nvmem_stm32_romem-y := stm32-romem.o obj-$(CONFIG_NVMEM_SUNPLUS_OCOTP) += nvmem_sunplus_ocotp.o -nvmem_sunplus_ocotp-y := sunplus-ocotp.o -obj-$(CONFIG_NVMEM_APPLE_EFUSES) += nvmem-apple-efuses.o -nvmem-apple-efuses-y := apple-efuses.o -obj-$(CONFIG_MICROCHIP_OTPC) += nvmem-microchip-otpc.o -nvmem-microchip-otpc-y := microchip-otpc.o +nvmem_sunplus_ocotp-y := sunplus-ocotp.o +obj-$(CONFIG_NVMEM_SUNXI_SID) += nvmem_sunxi_sid.o +nvmem_sunxi_sid-y := sunxi_sid.o +obj-$(CONFIG_NVMEM_U_BOOT_ENV) += nvmem_u-boot-env.o +nvmem_u-boot-env-y := u-boot-env.o +obj-$(CONFIG_NVMEM_UNIPHIER_EFUSE) += nvmem-uniphier-efuse.o +nvmem-uniphier-efuse-y := uniphier-efuse.o +obj-$(CONFIG_NVMEM_VF610_OCOTP) += nvmem-vf610-ocotp.o +nvmem-vf610-ocotp-y := vf610-ocotp.o +obj-$(CONFIG_NVMEM_ZYNQMP) += nvmem_zynqmp_nvmem.o +nvmem_zynqmp_nvmem-y := zynqmp_nvmem.o diff --git a/drivers/nvmem/brcm_nvram.c b/drivers/nvmem/brcm_nvram.c index 450b927691c3..4441daa20965 100644 --- a/drivers/nvmem/brcm_nvram.c +++ b/drivers/nvmem/brcm_nvram.c @@ -96,7 +96,7 @@ static int brcm_nvram_parse(struct brcm_nvram *priv) len = le32_to_cpu(header.len); - data = kcalloc(1, len, GFP_KERNEL); + data = kzalloc(len, GFP_KERNEL); memcpy_fromio(data, priv->base, len); data[len - 1] = '\0'; diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c index 1e3c754efd0d..321d7d63e068 100644 --- a/drivers/nvmem/core.c +++ b/drivers/nvmem/core.c @@ -810,18 +810,24 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config) switch (config->id) { case NVMEM_DEVID_NONE: - dev_set_name(&nvmem->dev, "%s", config->name); + rval = dev_set_name(&nvmem->dev, "%s", config->name); break; case NVMEM_DEVID_AUTO: - dev_set_name(&nvmem->dev, "%s%d", config->name, nvmem->id); + rval = dev_set_name(&nvmem->dev, "%s%d", config->name, nvmem->id); break; default: - dev_set_name(&nvmem->dev, "%s%d", + rval = dev_set_name(&nvmem->dev, "%s%d", config->name ? : "nvmem", config->name ? config->id : nvmem->id); break; } + if (rval) { + ida_free(&nvmem_ida, nvmem->id); + kfree(nvmem); + return ERR_PTR(rval); + } + nvmem->read_only = device_property_present(config->dev, "read-only") || config->read_only || !nvmem->reg_write; @@ -829,21 +835,18 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config) nvmem->dev.groups = nvmem_dev_groups; #endif - if (nvmem->nkeepout) { - rval = nvmem_validate_keepouts(nvmem); - if (rval) { - ida_free(&nvmem_ida, nvmem->id); - kfree(nvmem); - return ERR_PTR(rval); - } - } - dev_dbg(&nvmem->dev, "Registering nvmem device %s\n", config->name); rval = device_register(&nvmem->dev); if (rval) goto err_put_device; + if (nvmem->nkeepout) { + rval = nvmem_validate_keepouts(nvmem); + if (rval) + goto err_device_del; + } + if (config->compat) { rval = nvmem_sysfs_setup_compat(nvmem, config); if (rval) diff --git a/drivers/nvmem/lan9662-otpc.c b/drivers/nvmem/lan9662-otpc.c new file mode 100644 index 000000000000..f6732fd216d8 --- /dev/null +++ b/drivers/nvmem/lan9662-otpc.c @@ -0,0 +1,222 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/iopoll.h> +#include <linux/module.h> +#include <linux/nvmem-provider.h> +#include <linux/of.h> +#include <linux/platform_device.h> + +#define OTP_OTP_PWR_DN(t) (t + 0x00) +#define OTP_OTP_PWR_DN_OTP_PWRDN_N BIT(0) +#define OTP_OTP_ADDR_HI(t) (t + 0x04) +#define OTP_OTP_ADDR_LO(t) (t + 0x08) +#define OTP_OTP_PRGM_DATA(t) (t + 0x10) +#define OTP_OTP_PRGM_MODE(t) (t + 0x14) +#define OTP_OTP_PRGM_MODE_OTP_PGM_MODE_BYTE BIT(0) +#define OTP_OTP_RD_DATA(t) (t + 0x18) +#define OTP_OTP_FUNC_CMD(t) (t + 0x20) +#define OTP_OTP_FUNC_CMD_OTP_PROGRAM BIT(1) +#define OTP_OTP_FUNC_CMD_OTP_READ BIT(0) +#define OTP_OTP_CMD_GO(t) (t + 0x28) +#define OTP_OTP_CMD_GO_OTP_GO BIT(0) +#define OTP_OTP_PASS_FAIL(t) (t + 0x2c) +#define OTP_OTP_PASS_FAIL_OTP_READ_PROHIBITED BIT(3) +#define OTP_OTP_PASS_FAIL_OTP_WRITE_PROHIBITED BIT(2) +#define OTP_OTP_PASS_FAIL_OTP_FAIL BIT(0) +#define OTP_OTP_STATUS(t) (t + 0x30) +#define OTP_OTP_STATUS_OTP_CPUMPEN BIT(1) +#define OTP_OTP_STATUS_OTP_BUSY BIT(0) + +#define OTP_MEM_SIZE 8192 +#define OTP_SLEEP_US 10 +#define OTP_TIMEOUT_US 500000 + +struct lan9662_otp { + struct device *dev; + void __iomem *base; +}; + +static bool lan9662_otp_wait_flag_clear(void __iomem *reg, u32 flag) +{ + u32 val; + + return readl_poll_timeout(reg, val, !(val & flag), + OTP_SLEEP_US, OTP_TIMEOUT_US); +} + +static int lan9662_otp_power(struct lan9662_otp *otp, bool up) +{ + void __iomem *pwrdn = OTP_OTP_PWR_DN(otp->base); + + if (up) { + writel(readl(pwrdn) & ~OTP_OTP_PWR_DN_OTP_PWRDN_N, pwrdn); + if (lan9662_otp_wait_flag_clear(OTP_OTP_STATUS(otp->base), + OTP_OTP_STATUS_OTP_CPUMPEN)) + return -ETIMEDOUT; + } else { + writel(readl(pwrdn) | OTP_OTP_PWR_DN_OTP_PWRDN_N, pwrdn); + } + + return 0; +} + +static int lan9662_otp_execute(struct lan9662_otp *otp) +{ + if (lan9662_otp_wait_flag_clear(OTP_OTP_CMD_GO(otp->base), + OTP_OTP_CMD_GO_OTP_GO)) + return -ETIMEDOUT; + + if (lan9662_otp_wait_flag_clear(OTP_OTP_STATUS(otp->base), + OTP_OTP_STATUS_OTP_BUSY)) + return -ETIMEDOUT; + + return 0; +} + +static void lan9662_otp_set_address(struct lan9662_otp *otp, u32 offset) +{ + writel(0xff & (offset >> 8), OTP_OTP_ADDR_HI(otp->base)); + writel(0xff & offset, OTP_OTP_ADDR_LO(otp->base)); +} + +static int lan9662_otp_read_byte(struct lan9662_otp *otp, u32 offset, u8 *dst) +{ + u32 pass; + int rc; + + lan9662_otp_set_address(otp, offset); + writel(OTP_OTP_FUNC_CMD_OTP_READ, OTP_OTP_FUNC_CMD(otp->base)); + writel(OTP_OTP_CMD_GO_OTP_GO, OTP_OTP_CMD_GO(otp->base)); + rc = lan9662_otp_execute(otp); + if (!rc) { + pass = readl(OTP_OTP_PASS_FAIL(otp->base)); + if (pass & OTP_OTP_PASS_FAIL_OTP_READ_PROHIBITED) + return -EACCES; + *dst = (u8) readl(OTP_OTP_RD_DATA(otp->base)); + } + return rc; +} + +static int lan9662_otp_write_byte(struct lan9662_otp *otp, u32 offset, u8 data) +{ + u32 pass; + int rc; + + lan9662_otp_set_address(otp, offset); + writel(OTP_OTP_PRGM_MODE_OTP_PGM_MODE_BYTE, OTP_OTP_PRGM_MODE(otp->base)); + writel(data, OTP_OTP_PRGM_DATA(otp->base)); + writel(OTP_OTP_FUNC_CMD_OTP_PROGRAM, OTP_OTP_FUNC_CMD(otp->base)); + writel(OTP_OTP_CMD_GO_OTP_GO, OTP_OTP_CMD_GO(otp->base)); + + rc = lan9662_otp_execute(otp); + if (!rc) { + pass = readl(OTP_OTP_PASS_FAIL(otp->base)); + if (pass & OTP_OTP_PASS_FAIL_OTP_WRITE_PROHIBITED) + return -EACCES; + if (pass & OTP_OTP_PASS_FAIL_OTP_FAIL) + return -EIO; + } + return rc; +} + +static int lan9662_otp_read(void *context, unsigned int offset, + void *_val, size_t bytes) +{ + struct lan9662_otp *otp = context; + u8 *val = _val; + uint8_t data; + int i, rc = 0; + + lan9662_otp_power(otp, true); + for (i = 0; i < bytes; i++) { + rc = lan9662_otp_read_byte(otp, offset + i, &data); + if (rc < 0) + break; + *val++ = data; + } + lan9662_otp_power(otp, false); + + return rc; +} + +static int lan9662_otp_write(void *context, unsigned int offset, + void *_val, size_t bytes) +{ + struct lan9662_otp *otp = context; + u8 *val = _val; + u8 data, newdata; + int i, rc = 0; + + lan9662_otp_power(otp, true); + for (i = 0; i < bytes; i++) { + /* Skip zero bytes */ + if (val[i]) { + rc = lan9662_otp_read_byte(otp, offset + i, &data); + if (rc < 0) + break; + + newdata = data | val[i]; + if (newdata == data) + continue; + + rc = lan9662_otp_write_byte(otp, offset + i, + newdata); + if (rc < 0) + break; + } + } + lan9662_otp_power(otp, false); + + return rc; +} + +static struct nvmem_config otp_config = { + .name = "lan9662-otp", + .stride = 1, + .word_size = 1, + .reg_read = lan9662_otp_read, + .reg_write = lan9662_otp_write, + .size = OTP_MEM_SIZE, +}; + +static int lan9662_otp_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct nvmem_device *nvmem; + struct lan9662_otp *otp; + + otp = devm_kzalloc(&pdev->dev, sizeof(*otp), GFP_KERNEL); + if (!otp) + return -ENOMEM; + + otp->dev = dev; + otp->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(otp->base)) + return PTR_ERR(otp->base); + + otp_config.priv = otp; + otp_config.dev = dev; + + nvmem = devm_nvmem_register(dev, &otp_config); + + return PTR_ERR_OR_ZERO(nvmem); +} + +static const struct of_device_id lan9662_otp_match[] = { + { .compatible = "microchip,lan9662-otp", }, + { }, +}; +MODULE_DEVICE_TABLE(of, lan9662_otp_match); + +static struct platform_driver lan9662_otp_driver = { + .probe = lan9662_otp_probe, + .driver = { + .name = "lan9662-otp", + .of_match_table = lan9662_otp_match, + }, +}; +module_platform_driver(lan9662_otp_driver); + +MODULE_AUTHOR("Horatiu Vultur <horatiu.vultur@microchip.com>"); +MODULE_DESCRIPTION("lan9662 OTP driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/nvmem/u-boot-env.c b/drivers/nvmem/u-boot-env.c new file mode 100644 index 000000000000..8e72d1bbd649 --- /dev/null +++ b/drivers/nvmem/u-boot-env.c @@ -0,0 +1,219 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2022 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + */ + +#include <linux/crc32.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/mtd/mtd.h> +#include <linux/nvmem-consumer.h> +#include <linux/nvmem-provider.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +enum u_boot_env_format { + U_BOOT_FORMAT_SINGLE, + U_BOOT_FORMAT_REDUNDANT, +}; + +struct u_boot_env { + struct device *dev; + enum u_boot_env_format format; + + struct mtd_info *mtd; + + /* Cells */ + struct nvmem_cell_info *cells; + int ncells; +}; + +struct u_boot_env_image_single { + __le32 crc32; + uint8_t data[]; +} __packed; + +struct u_boot_env_image_redundant { + __le32 crc32; + u8 mark; + uint8_t data[]; +} __packed; + +static int u_boot_env_read(void *context, unsigned int offset, void *val, + size_t bytes) +{ + struct u_boot_env *priv = context; + struct device *dev = priv->dev; + size_t bytes_read; + int err; + + err = mtd_read(priv->mtd, offset, bytes, &bytes_read, val); + if (err && !mtd_is_bitflip(err)) { + dev_err(dev, "Failed to read from mtd: %d\n", err); + return err; + } + + if (bytes_read != bytes) { + dev_err(dev, "Failed to read %zu bytes\n", bytes); + return -EIO; + } + + return 0; +} + +static int u_boot_env_add_cells(struct u_boot_env *priv, uint8_t *buf, + size_t data_offset, size_t data_len) +{ + struct device *dev = priv->dev; + char *data = buf + data_offset; + char *var, *value, *eq; + int idx; + + priv->ncells = 0; + for (var = data; var < data + data_len && *var; var += strlen(var) + 1) + priv->ncells++; + + priv->cells = devm_kcalloc(dev, priv->ncells, sizeof(*priv->cells), GFP_KERNEL); + if (!priv->cells) + return -ENOMEM; + + for (var = data, idx = 0; + var < data + data_len && *var; + var = value + strlen(value) + 1, idx++) { + eq = strchr(var, '='); + if (!eq) + break; + *eq = '\0'; + value = eq + 1; + + priv->cells[idx].name = devm_kstrdup(dev, var, GFP_KERNEL); + if (!priv->cells[idx].name) + return -ENOMEM; + priv->cells[idx].offset = data_offset + value - data; + priv->cells[idx].bytes = strlen(value); + priv->cells[idx].np = of_get_child_by_name(dev->of_node, priv->cells[idx].name); + } + + if (WARN_ON(idx != priv->ncells)) + priv->ncells = idx; + + return 0; +} + +static int u_boot_env_parse(struct u_boot_env *priv) +{ + struct device *dev = priv->dev; + size_t crc32_data_offset; + size_t crc32_data_len; + size_t crc32_offset; + size_t data_offset; + size_t data_len; + uint32_t crc32; + uint32_t calc; + size_t bytes; + uint8_t *buf; + int err; + + buf = kcalloc(1, priv->mtd->size, GFP_KERNEL); + if (!buf) { + err = -ENOMEM; + goto err_out; + } + + err = mtd_read(priv->mtd, 0, priv->mtd->size, &bytes, buf); + if ((err && !mtd_is_bitflip(err)) || bytes != priv->mtd->size) { + dev_err(dev, "Failed to read from mtd: %d\n", err); + goto err_kfree; + } + + switch (priv->format) { + case U_BOOT_FORMAT_SINGLE: + crc32_offset = offsetof(struct u_boot_env_image_single, crc32); + crc32_data_offset = offsetof(struct u_boot_env_image_single, data); + data_offset = offsetof(struct u_boot_env_image_single, data); + break; + case U_BOOT_FORMAT_REDUNDANT: + crc32_offset = offsetof(struct u_boot_env_image_redundant, crc32); + crc32_data_offset = offsetof(struct u_boot_env_image_redundant, mark); + data_offset = offsetof(struct u_boot_env_image_redundant, data); + break; + } + crc32 = le32_to_cpu(*(__le32 *)(buf + crc32_offset)); + crc32_data_len = priv->mtd->size - crc32_data_offset; + data_len = priv->mtd->size - data_offset; + + calc = crc32(~0, buf + crc32_data_offset, crc32_data_len) ^ ~0L; + if (calc != crc32) { + dev_err(dev, "Invalid calculated CRC32: 0x%08x (expected: 0x%08x)\n", calc, crc32); + err = -EINVAL; + goto err_kfree; + } + + buf[priv->mtd->size - 1] = '\0'; + err = u_boot_env_add_cells(priv, buf, data_offset, data_len); + if (err) + dev_err(dev, "Failed to add cells: %d\n", err); + +err_kfree: + kfree(buf); +err_out: + return err; +} + +static int u_boot_env_probe(struct platform_device *pdev) +{ + struct nvmem_config config = { + .name = "u-boot-env", + .reg_read = u_boot_env_read, + }; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct u_boot_env *priv; + int err; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + priv->dev = dev; + + priv->format = (uintptr_t)of_device_get_match_data(dev); + + priv->mtd = of_get_mtd_device_by_node(np); + if (IS_ERR(priv->mtd)) { + dev_err_probe(dev, PTR_ERR(priv->mtd), "Failed to get %pOF MTD\n", np); + return PTR_ERR(priv->mtd); + } + + err = u_boot_env_parse(priv); + if (err) + return err; + + config.dev = dev; + config.cells = priv->cells; + config.ncells = priv->ncells; + config.priv = priv; + config.size = priv->mtd->size; + + return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &config)); +} + +static const struct of_device_id u_boot_env_of_match_table[] = { + { .compatible = "u-boot,env", .data = (void *)U_BOOT_FORMAT_SINGLE, }, + { .compatible = "u-boot,env-redundant-bool", .data = (void *)U_BOOT_FORMAT_REDUNDANT, }, + { .compatible = "u-boot,env-redundant-count", .data = (void *)U_BOOT_FORMAT_REDUNDANT, }, + {}, +}; + +static struct platform_driver u_boot_env_driver = { + .probe = u_boot_env_probe, + .driver = { + .name = "u_boot_env", + .of_match_table = u_boot_env_of_match_table, + }, +}; +module_platform_driver(u_boot_env_driver); + +MODULE_AUTHOR("RafaÅ‚ MiÅ‚ecki"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(of, u_boot_env_of_match_table); diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c index eda4ded4d5e5..7c45927e2131 100644 --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -2604,6 +2604,7 @@ enum parport_pc_pci_cards { oxsemi_pcie_pport, aks_0100, mobility_pp, + netmos_9900, netmos_9705, netmos_9715, netmos_9755, @@ -2665,6 +2666,7 @@ static struct parport_pc_pci { /* oxsemi_pcie_pport */ { 1, { { 0, 1 }, } }, /* aks_0100 */ { 1, { { 0, -1 }, } }, /* mobility_pp */ { 1, { { 0, 1 }, } }, + /* netmos_9900 */ { 1, { { 0, -1 }, } }, /* The netmos entries below are untested */ /* netmos_9705 */ { 1, { { 0, -1 }, } }, @@ -2746,6 +2748,8 @@ static const struct pci_device_id parport_pc_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, aks_0100 }, { 0x14f2, 0x0121, PCI_ANY_ID, PCI_ANY_ID, 0, 0, mobility_pp }, /* NetMos communication controllers */ + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900, + 0xA000, 0x2000, 0, 0, netmos_9900 }, { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9705, PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9705 }, { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9715, diff --git a/drivers/slimbus/Kconfig b/drivers/slimbus/Kconfig index 1235b7dc8496..2ed821f75816 100644 --- a/drivers/slimbus/Kconfig +++ b/drivers/slimbus/Kconfig @@ -22,7 +22,8 @@ config SLIM_QCOM_CTRL config SLIM_QCOM_NGD_CTRL tristate "Qualcomm SLIMbus Satellite Non-Generic Device Component" - depends on HAS_IOMEM && DMA_ENGINE && NET && QCOM_RPROC_COMMON + depends on HAS_IOMEM && DMA_ENGINE && NET + depends on QCOM_RPROC_COMMON || COMPILE_TEST depends on ARCH_QCOM || COMPILE_TEST select QCOM_QMI_HELPERS select QCOM_PDR_HELPERS diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c index 0aa8408464ad..76c5e446d243 100644 --- a/drivers/slimbus/qcom-ngd-ctrl.c +++ b/drivers/slimbus/qcom-ngd-ctrl.c @@ -1470,7 +1470,13 @@ static int of_qcom_slim_ngd_register(struct device *parent, ngd->pdev->dev.of_node = node; ctrl->ngd = ngd; - platform_device_add(ngd->pdev); + ret = platform_device_add(ngd->pdev); + if (ret) { + platform_device_put(ngd->pdev); + kfree(ngd); + of_node_put(node); + return ret; + } ngd->base = ctrl->base + ngd->id * data->offset + (ngd->id - 1) * data->size; @@ -1543,10 +1549,8 @@ static int qcom_slim_ngd_ctrl_probe(struct platform_device *pdev) ret = devm_request_irq(dev, ret, qcom_slim_ngd_interrupt, IRQF_TRIGGER_HIGH, "slim-ngd", ctrl); - if (ret) { - dev_err(&pdev->dev, "request IRQ failed\n"); - return ret; - } + if (ret) + return dev_err_probe(&pdev->dev, ret, "request IRQ failed\n"); ctrl->nb.notifier_call = qcom_slim_ngd_ssr_notify; ctrl->notifier = qcom_register_ssr_notifier("lpass", &ctrl->nb); @@ -1575,18 +1579,27 @@ static int qcom_slim_ngd_ctrl_probe(struct platform_device *pdev) ctrl->pdr = pdr_handle_alloc(slim_pd_status, ctrl); if (IS_ERR(ctrl->pdr)) { - dev_err(dev, "Failed to init PDR handle\n"); - return PTR_ERR(ctrl->pdr); + ret = dev_err_probe(dev, PTR_ERR(ctrl->pdr), + "Failed to init PDR handle\n"); + goto err_pdr_alloc; } pds = pdr_add_lookup(ctrl->pdr, "avs/audio", "msm/adsp/audio_pd"); if (IS_ERR(pds) && PTR_ERR(pds) != -EALREADY) { - dev_err(dev, "pdr add lookup failed: %d\n", ret); - return PTR_ERR(pds); + ret = dev_err_probe(dev, PTR_ERR(pds), "pdr add lookup failed\n"); + goto err_pdr_lookup; } platform_driver_register(&qcom_slim_ngd_driver); return of_qcom_slim_ngd_register(dev, ctrl); + +err_pdr_alloc: + qcom_unregister_ssr_notifier(ctrl->notifier, &ctrl->nb); + +err_pdr_lookup: + pdr_handle_release(ctrl->pdr); + + return ret; } static int qcom_slim_ngd_ctrl_remove(struct platform_device *pdev) diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig index 73e63920b1b9..40d0cc600cae 100644 --- a/drivers/soc/mediatek/Kconfig +++ b/drivers/soc/mediatek/Kconfig @@ -77,7 +77,7 @@ config MTK_MMSYS config MTK_SVS tristate "MediaTek Smart Voltage Scaling(SVS)" - depends on MTK_EFUSE && NVMEM + depends on NVMEM_MTK_EFUSE && NVMEM help The Smart Voltage Scaling(SVS) engine is a piece of hardware which has several controllers(banks) for calculating suitable diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c index 2113be40b5a9..2cf3203b2397 100644 --- a/drivers/spmi/spmi-pmic-arb.c +++ b/drivers/spmi/spmi-pmic-arb.c @@ -91,7 +91,7 @@ enum pmic_arb_channel { /* Maximum number of support PMIC peripherals */ #define PMIC_ARB_MAX_PERIPHS 512 -#define PMIC_ARB_TIMEOUT_US 100 +#define PMIC_ARB_TIMEOUT_US 1000 #define PMIC_ARB_MAX_TRANS_BYTES (8) #define PMIC_ARB_APID_MASK 0xFF @@ -590,23 +590,16 @@ static void cleanup_irq(struct spmi_pmic_arb *pmic_arb, u16 apid, int id) u8 per = ppid & 0xFF; u8 irq_mask = BIT(id); + dev_err_ratelimited(&pmic_arb->spmic->dev, "%s apid=%d sid=0x%x per=0x%x irq=%d\n", + __func__, apid, sid, per, id); writel_relaxed(irq_mask, pmic_arb->ver_ops->irq_clear(pmic_arb, apid)); - - if (pmic_arb_write_cmd(pmic_arb->spmic, SPMI_CMD_EXT_WRITEL, sid, - (per << 8) + QPNPINT_REG_LATCHED_CLR, &irq_mask, 1)) - dev_err_ratelimited(&pmic_arb->spmic->dev, "failed to ack irq_mask = 0x%x for ppid = %x\n", - irq_mask, ppid); - - if (pmic_arb_write_cmd(pmic_arb->spmic, SPMI_CMD_EXT_WRITEL, sid, - (per << 8) + QPNPINT_REG_EN_CLR, &irq_mask, 1)) - dev_err_ratelimited(&pmic_arb->spmic->dev, "failed to ack irq_mask = 0x%x for ppid = %x\n", - irq_mask, ppid); } -static void periph_interrupt(struct spmi_pmic_arb *pmic_arb, u16 apid) +static int periph_interrupt(struct spmi_pmic_arb *pmic_arb, u16 apid) { unsigned int irq; u32 status, id; + int handled = 0; u8 sid = (pmic_arb->apid_data[apid].ppid >> 8) & 0xF; u8 per = pmic_arb->apid_data[apid].ppid & 0xFF; @@ -621,7 +614,10 @@ static void periph_interrupt(struct spmi_pmic_arb *pmic_arb, u16 apid) continue; } generic_handle_irq(irq); + handled++; } + + return handled; } static void pmic_arb_chained_irq(struct irq_desc *desc) @@ -629,28 +625,66 @@ static void pmic_arb_chained_irq(struct irq_desc *desc) struct spmi_pmic_arb *pmic_arb = irq_desc_get_handler_data(desc); const struct pmic_arb_ver_ops *ver_ops = pmic_arb->ver_ops; struct irq_chip *chip = irq_desc_get_chip(desc); - int first = pmic_arb->min_apid >> 5; - int last = pmic_arb->max_apid >> 5; + int first = pmic_arb->min_apid; + int last = pmic_arb->max_apid; u8 ee = pmic_arb->ee; - u32 status, enable; + u32 status, enable, handled = 0; int i, id, apid; + /* status based dispatch */ + bool acc_valid = false; + u32 irq_status = 0; chained_irq_enter(chip, desc); - for (i = first; i <= last; ++i) { + for (i = first >> 5; i <= last >> 5; ++i) { status = readl_relaxed( ver_ops->owner_acc_status(pmic_arb, ee, i)); + if (status) + acc_valid = true; + while (status) { id = ffs(status) - 1; status &= ~BIT(id); apid = id + i * 32; + if (apid < first || apid > last) { + WARN_ONCE(true, "spurious spmi irq received for apid=%d\n", + apid); + continue; + } enable = readl_relaxed( ver_ops->acc_enable(pmic_arb, apid)); if (enable & SPMI_PIC_ACC_ENABLE_BIT) - periph_interrupt(pmic_arb, apid); + if (periph_interrupt(pmic_arb, apid) != 0) + handled++; + } + } + + /* ACC_STATUS is empty but IRQ fired check IRQ_STATUS */ + if (!acc_valid) { + for (i = first; i <= last; i++) { + /* skip if APPS is not irq owner */ + if (pmic_arb->apid_data[i].irq_ee != pmic_arb->ee) + continue; + + irq_status = readl_relaxed( + ver_ops->irq_status(pmic_arb, i)); + if (irq_status) { + enable = readl_relaxed( + ver_ops->acc_enable(pmic_arb, i)); + if (enable & SPMI_PIC_ACC_ENABLE_BIT) { + dev_dbg(&pmic_arb->spmic->dev, + "Dispatching IRQ for apid=%d status=%x\n", + i, irq_status); + if (periph_interrupt(pmic_arb, i) != 0) + handled++; + } + } } } + if (handled == 0) + handle_bad_irq(desc); + chained_irq_exit(chip, desc); } @@ -770,6 +804,7 @@ static int qpnpint_irq_domain_activate(struct irq_domain *domain, u16 apid = hwirq_to_apid(d->hwirq); u16 sid = hwirq_to_sid(d->hwirq); u16 irq = hwirq_to_irq(d->hwirq); + u8 buf; if (pmic_arb->apid_data[apid].irq_ee != pmic_arb->ee) { dev_err(&pmic_arb->spmic->dev, "failed to xlate sid = %#x, periph = %#x, irq = %u: ee=%u but owner=%u\n", @@ -778,6 +813,10 @@ static int qpnpint_irq_domain_activate(struct irq_domain *domain, return -ENODEV; } + buf = BIT(irq); + qpnpint_spmi_write(d, QPNPINT_REG_EN_CLR, &buf, 1); + qpnpint_spmi_write(d, QPNPINT_REG_LATCHED_CLR, &buf, 1); + return 0; } @@ -992,7 +1031,8 @@ static int pmic_arb_read_apid_map_v5(struct spmi_pmic_arb *pmic_arb) * version 5, there is more than one APID mapped to each PPID. * The owner field for each of these mappings specifies the EE which is * allowed to write to the APID. The owner of the last (highest) APID - * for a given PPID will receive interrupts from the PPID. + * which has the IRQ owner bit set for a given PPID will receive + * interrupts from the PPID. */ for (i = 0; ; i++, apidd++) { offset = pmic_arb->ver_ops->apid_map_offset(i); @@ -1015,16 +1055,16 @@ static int pmic_arb_read_apid_map_v5(struct spmi_pmic_arb *pmic_arb) apid = pmic_arb->ppid_to_apid[ppid] & ~PMIC_ARB_APID_VALID; prev_apidd = &pmic_arb->apid_data[apid]; - if (valid && is_irq_ee && - prev_apidd->write_ee == pmic_arb->ee) { + if (!valid || apidd->write_ee == pmic_arb->ee) { + /* First PPID mapping or one for this EE */ + pmic_arb->ppid_to_apid[ppid] = i | PMIC_ARB_APID_VALID; + } else if (valid && is_irq_ee && + prev_apidd->write_ee == pmic_arb->ee) { /* * Duplicate PPID mapping after the one for this EE; * override the irq owner */ prev_apidd->irq_ee = apidd->irq_ee; - } else if (!valid || is_irq_ee) { - /* First PPID mapping or duplicate for another EE */ - pmic_arb->ppid_to_apid[ppid] = i | PMIC_ARB_APID_VALID; } apidd->ppid = ppid; @@ -1093,6 +1133,11 @@ static int pmic_arb_offset_v5(struct spmi_pmic_arb *pmic_arb, u8 sid, u16 addr, offset = 0x10000 * pmic_arb->ee + 0x80 * apid; break; case PMIC_ARB_CHANNEL_RW: + if (pmic_arb->apid_data[apid].write_ee != pmic_arb->ee) { + dev_err(&pmic_arb->spmic->dev, "disallowed SPMI write to sid=%u, addr=0x%04X\n", + sid, addr); + return -EPERM; + } offset = 0x10000 * apid; break; } diff --git a/drivers/spmi/spmi.c b/drivers/spmi/spmi.c index a456ce5141e1..55381592bb5a 100644 --- a/drivers/spmi/spmi.c +++ b/drivers/spmi/spmi.c @@ -35,7 +35,7 @@ static void spmi_ctrl_release(struct device *dev) { struct spmi_controller *ctrl = to_spmi_controller(dev); - ida_simple_remove(&ctrl_ida, ctrl->nr); + ida_free(&ctrl_ida, ctrl->nr); kfree(ctrl); } @@ -457,7 +457,7 @@ struct spmi_controller *spmi_controller_alloc(struct device *parent, ctrl->dev.of_node = parent->of_node; spmi_controller_set_drvdata(ctrl, &ctrl[1]); - id = ida_simple_get(&ctrl_ida, 0, 0, GFP_KERNEL); + id = ida_alloc(&ctrl_ida, GFP_KERNEL); if (id < 0) { dev_err(parent, "unable to allocate SPMI controller identifier.\n"); diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig index a8e970db179d..afd05bf3345e 100644 --- a/drivers/staging/iio/Kconfig +++ b/drivers/staging/iio/Kconfig @@ -8,7 +8,6 @@ menu "IIO staging drivers" source "drivers/staging/iio/accel/Kconfig" source "drivers/staging/iio/adc/Kconfig" source "drivers/staging/iio/addac/Kconfig" -source "drivers/staging/iio/cdc/Kconfig" source "drivers/staging/iio/frequency/Kconfig" source "drivers/staging/iio/impedance-analyzer/Kconfig" source "drivers/staging/iio/meter/Kconfig" diff --git a/drivers/staging/iio/Makefile b/drivers/staging/iio/Makefile index b15904b99581..5ed56fe57e14 100644 --- a/drivers/staging/iio/Makefile +++ b/drivers/staging/iio/Makefile @@ -6,7 +6,6 @@ obj-y += accel/ obj-y += adc/ obj-y += addac/ -obj-y += cdc/ obj-y += frequency/ obj-y += impedance-analyzer/ obj-y += meter/ diff --git a/drivers/staging/iio/cdc/Kconfig b/drivers/staging/iio/cdc/Kconfig deleted file mode 100644 index a7386bbbcb79..000000000000 --- a/drivers/staging/iio/cdc/Kconfig +++ /dev/null @@ -1,17 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# CDC drivers -# -menu "Capacitance to digital converters" - -config AD7746 - tristate "Analog Devices AD7745, AD7746 AD7747 capacitive sensor driver" - depends on I2C - help - Say yes here to build support for Analog Devices capacitive sensors. - (AD7745, AD7746, AD7747) Provides direct access via sysfs. - - To compile this driver as a module, choose M here: the - module will be called ad7746. - -endmenu diff --git a/drivers/staging/iio/cdc/Makefile b/drivers/staging/iio/cdc/Makefile deleted file mode 100644 index afb7499a7090..000000000000 --- a/drivers/staging/iio/cdc/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for industrial I/O CDC drivers -# - -obj-$(CONFIG_AD7746) += ad7746.o diff --git a/drivers/staging/iio/frequency/ad9832.c b/drivers/staging/iio/frequency/ad9832.c index f43464db618a..6f9eebd6c7ee 100644 --- a/drivers/staging/iio/frequency/ad9832.c +++ b/drivers/staging/iio/frequency/ad9832.c @@ -112,10 +112,10 @@ struct ad9832_state { * transfer buffers to live in their own cache lines. */ union { - __be16 freq_data[4]____cacheline_aligned; + __be16 freq_data[4]; __be16 phase_data[2]; __be16 data; - }; + } __aligned(IIO_DMA_MINALIGN); }; static unsigned long ad9832_calc_freqreg(unsigned long mclk, unsigned long fout) diff --git a/drivers/staging/iio/frequency/ad9834.c b/drivers/staging/iio/frequency/ad9834.c index 94b131ef8a22..2b4267a87e65 100644 --- a/drivers/staging/iio/frequency/ad9834.c +++ b/drivers/staging/iio/frequency/ad9834.c @@ -83,7 +83,7 @@ struct ad9834_state { * DMA (thus cache coherency maintenance) requires the * transfer buffers to live in their own cache lines. */ - __be16 data ____cacheline_aligned; + __be16 data __aligned(IIO_DMA_MINALIGN); __be16 freq_data[2]; }; diff --git a/drivers/staging/iio/meter/ade7854.h b/drivers/staging/iio/meter/ade7854.h index a51e6e3183d3..7a49f8f1016f 100644 --- a/drivers/staging/iio/meter/ade7854.h +++ b/drivers/staging/iio/meter/ade7854.h @@ -162,7 +162,7 @@ struct ade7854_state { int bits); int irq; struct mutex buf_lock; - u8 tx[ADE7854_MAX_TX] ____cacheline_aligned; + u8 tx[ADE7854_MAX_TX] __aligned(IIO_DMA_MINALIGN); u8 rx[ADE7854_MAX_RX]; }; diff --git a/drivers/staging/iio/resolver/ad2s1210.c b/drivers/staging/iio/resolver/ad2s1210.c index c0b2716d0511..e4cf42438487 100644 --- a/drivers/staging/iio/resolver/ad2s1210.c +++ b/drivers/staging/iio/resolver/ad2s1210.c @@ -94,8 +94,8 @@ struct ad2s1210_state { bool hysteresis; u8 resolution; enum ad2s1210_mode mode; - u8 rx[2] ____cacheline_aligned; - u8 tx[2] ____cacheline_aligned; + u8 rx[2] __aligned(IIO_DMA_MINALIGN); + u8 tx[2]; }; static const int ad2s1210_mode_vals[4][2] = { diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig index bfd889422dd3..2c7f3f9a26eb 100644 --- a/drivers/thermal/qcom/Kconfig +++ b/drivers/thermal/qcom/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config QCOM_TSENS tristate "Qualcomm TSENS Temperature Alarm" - depends on QCOM_QFPROM + depends on NVMEM_QCOM_QFPROM depends on ARCH_QCOM || COMPILE_TEST help This enables the thermal sysfs driver for the TSENS device. It shows diff --git a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c index af68adf720cc..1b2c43eab27d 100644 --- a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c +++ b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c @@ -829,7 +829,8 @@ static int adc_tm5_get_dt_channel_data(struct adc_tm5_chip *adc_tm, } channel->adc_channel = args.args[0]; - channel->iio = devm_of_iio_channel_get_by_name(adc_tm->dev, node, NULL); + channel->iio = devm_fwnode_iio_channel_get_by_name(adc_tm->dev, + of_fwnode_handle(node), NULL); if (IS_ERR(channel->iio)) { ret = PTR_ERR(channel->iio); if (ret != -EPROBE_DEFER) diff --git a/drivers/uio/uio_dfl.c b/drivers/uio/uio_dfl.c index 8f39cc8bb034..69e93f3e7faf 100644 --- a/drivers/uio/uio_dfl.c +++ b/drivers/uio/uio_dfl.c @@ -46,10 +46,12 @@ static int uio_dfl_probe(struct dfl_device *ddev) #define FME_FEATURE_ID_ETH_GROUP 0x10 #define FME_FEATURE_ID_HSSI_SUBSYS 0x15 +#define PORT_FEATURE_ID_IOPLL_USRCLK 0x14 static const struct dfl_device_id uio_dfl_ids[] = { { FME_ID, FME_FEATURE_ID_ETH_GROUP }, { FME_ID, FME_FEATURE_ID_HSSI_SUBSYS }, + { PORT_ID, PORT_FEATURE_ID_IOPLL_USRCLK }, { } }; MODULE_DEVICE_TABLE(dfl, uio_dfl_ids); diff --git a/drivers/virt/vboxguest/vboxguest_core.c b/drivers/virt/vboxguest/vboxguest_core.c index 0b43efddea22..dfd69bd77f53 100644 --- a/drivers/virt/vboxguest/vboxguest_core.c +++ b/drivers/virt/vboxguest/vboxguest_core.c @@ -198,7 +198,7 @@ static int vbg_report_guest_info(struct vbg_dev *gdev) req2->additions_revision = VBG_SVN_REV; req2->additions_features = VMMDEV_GUEST_INFO2_ADDITIONS_FEATURES_REQUESTOR_INFO; - strlcpy(req2->name, VBG_VERSION_STRING, + strscpy(req2->name, VBG_VERSION_STRING, sizeof(req2->name)); /* diff --git a/drivers/virt/vboxguest/vboxguest_linux.c b/drivers/virt/vboxguest/vboxguest_linux.c index 4ccfd30c2a30..c47e62dc55da 100644 --- a/drivers/virt/vboxguest/vboxguest_linux.c +++ b/drivers/virt/vboxguest/vboxguest_linux.c @@ -270,6 +270,13 @@ static ssize_t host_features_show(struct device *dev, static DEVICE_ATTR_RO(host_version); static DEVICE_ATTR_RO(host_features); +static struct attribute *vbg_pci_attrs[] = { + &dev_attr_host_version.attr, + &dev_attr_host_features.attr, + NULL, +}; +ATTRIBUTE_GROUPS(vbg_pci); + /** * Does the PCI detection and init of the device. * @@ -390,12 +397,6 @@ static int vbg_pci_probe(struct pci_dev *pci, const struct pci_device_id *id) } pci_set_drvdata(pci, gdev); - device_create_file(dev, &dev_attr_host_version); - device_create_file(dev, &dev_attr_host_features); - - vbg_info("vboxguest: misc device minor %d, IRQ %d, I/O port %x, MMIO at %pap (size %pap)\n", - gdev->misc_device.minor, pci->irq, gdev->io_port, - &mmio, &mmio_len); return 0; @@ -422,8 +423,6 @@ static void vbg_pci_remove(struct pci_dev *pci) mutex_unlock(&vbg_gdev_mutex); free_irq(pci->irq, gdev); - device_remove_file(gdev->dev, &dev_attr_host_features); - device_remove_file(gdev->dev, &dev_attr_host_version); misc_deregister(&gdev->misc_device_user); misc_deregister(&gdev->misc_device); vbg_core_exit(gdev); @@ -488,6 +487,7 @@ MODULE_DEVICE_TABLE(pci, vbg_pci_ids); static struct pci_driver vbg_pci_driver = { .name = DEVICE_NAME, + .dev_groups = vbg_pci_groups, .id_table = vbg_pci_ids, .probe = vbg_pci_probe, .remove = vbg_pci_remove, diff --git a/drivers/w1/w1_netlink.c b/drivers/w1/w1_netlink.c index fa490aa4407c..db110cc442b1 100644 --- a/drivers/w1/w1_netlink.c +++ b/drivers/w1/w1_netlink.c @@ -611,7 +611,8 @@ static void w1_cn_callback(struct cn_msg *cn, struct netlink_skb_parms *nsp) } atomic_set(&block->refcnt, 1); block->portid = nsp->portid; - memcpy(&block->request_cn, cn, sizeof(*cn) + cn->len); + block->request_cn = *cn; + memcpy(block->request_cn.data, cn->data, cn->len); node = (struct w1_cb_node *)(block->request_cn.data + cn->len); /* Sneeky, when not bundling, reply_size is the allocated space diff --git a/include/dt-bindings/iio/adc/at91-sama5d2_adc.h b/include/dt-bindings/iio/adc/at91-sama5d2_adc.h index 70f99dbdbb42..866d36530583 100644 --- a/include/dt-bindings/iio/adc/at91-sama5d2_adc.h +++ b/include/dt-bindings/iio/adc/at91-sama5d2_adc.h @@ -13,4 +13,7 @@ /* pressure channel index */ #define AT91_SAMA5D2_ADC_P_CHANNEL 26 +/* SAMA7G5 Temperature sensor channel index. */ +#define AT91_SAMA7G5_ADC_TEMP_CHANNEL 31 + #endif diff --git a/include/linux/coresight.h b/include/linux/coresight.h index 9f445f09fcfe..1554021231f9 100644 --- a/include/linux/coresight.h +++ b/include/linux/coresight.h @@ -372,6 +372,29 @@ static inline u32 csdev_access_relaxed_read32(struct csdev_access *csa, return csa->read(offset, true, false); } +static inline u64 csdev_access_relaxed_read_pair(struct csdev_access *csa, + u32 lo_offset, u32 hi_offset) +{ + if (likely(csa->io_mem)) { + return readl_relaxed(csa->base + lo_offset) | + ((u64)readl_relaxed(csa->base + hi_offset) << 32); + } + + return csa->read(lo_offset, true, false) | (csa->read(hi_offset, true, false) << 32); +} + +static inline void csdev_access_relaxed_write_pair(struct csdev_access *csa, u64 val, + u32 lo_offset, u32 hi_offset) +{ + if (likely(csa->io_mem)) { + writel_relaxed((u32)val, csa->base + lo_offset); + writel_relaxed((u32)(val >> 32), csa->base + hi_offset); + } else { + csa->write((u32)val, lo_offset, true, false); + csa->write((u32)(val >> 32), hi_offset, true, false); + } +} + static inline u32 csdev_access_read32(struct csdev_access *csa, u32 offset) { if (likely(csa->io_mem)) diff --git a/include/linux/counter.h b/include/linux/counter.h index 1fe17f5adb09..c41fa602ed28 100644 --- a/include/linux/counter.h +++ b/include/linux/counter.h @@ -31,6 +31,8 @@ enum counter_comp_type { COUNTER_COMP_ENUM, COUNTER_COMP_COUNT_DIRECTION, COUNTER_COMP_COUNT_MODE, + COUNTER_COMP_SIGNAL_POLARITY, + COUNTER_COMP_ARRAY, }; /** @@ -38,66 +40,114 @@ enum counter_comp_type { * @type: Counter component data type * @name: device-specific component name * @priv: component-relevant data - * @action_read: Synapse action mode read callback. The read value of the + * @action_read: Synapse action mode read callback. The read value of the * respective Synapse action mode should be passed back via * the action parameter. - * @device_u8_read: Device u8 component read callback. The read value of the + * @device_u8_read: Device u8 component read callback. The read value of the * respective Device u8 component should be passed back via * the val parameter. - * @count_u8_read: Count u8 component read callback. The read value of the + * @count_u8_read: Count u8 component read callback. The read value of the * respective Count u8 component should be passed back via * the val parameter. - * @signal_u8_read: Signal u8 component read callback. The read value of the + * @signal_u8_read: Signal u8 component read callback. The read value of the * respective Signal u8 component should be passed back via * the val parameter. - * @device_u32_read: Device u32 component read callback. The read value of + * @device_u32_read: Device u32 component read callback. The read value of * the respective Device u32 component should be passed * back via the val parameter. - * @count_u32_read: Count u32 component read callback. The read value of the + * @count_u32_read: Count u32 component read callback. The read value of the * respective Count u32 component should be passed back via * the val parameter. - * @signal_u32_read: Signal u32 component read callback. The read value of + * @signal_u32_read: Signal u32 component read callback. The read value of * the respective Signal u32 component should be passed * back via the val parameter. - * @device_u64_read: Device u64 component read callback. The read value of + * @device_u64_read: Device u64 component read callback. The read value of * the respective Device u64 component should be passed * back via the val parameter. - * @count_u64_read: Count u64 component read callback. The read value of the + * @count_u64_read: Count u64 component read callback. The read value of the * respective Count u64 component should be passed back via * the val parameter. - * @signal_u64_read: Signal u64 component read callback. The read value of + * @signal_u64_read: Signal u64 component read callback. The read value of * the respective Signal u64 component should be passed * back via the val parameter. - * @action_write: Synapse action mode write callback. The write value of + * @signal_array_u32_read: Signal u32 array component read callback. The + * index of the respective Count u32 array + * component element is passed via the idx + * parameter. The read value of the respective + * Count u32 array component element should be + * passed back via the val parameter. + * @device_array_u64_read: Device u64 array component read callback. The + * index of the respective Device u64 array + * component element is passed via the idx + * parameter. The read value of the respective + * Device u64 array component element should be + * passed back via the val parameter. + * @count_array_u64_read: Count u64 array component read callback. The + * index of the respective Count u64 array + * component element is passed via the idx + * parameter. The read value of the respective + * Count u64 array component element should be + * passed back via the val parameter. + * @signal_array_u64_read: Signal u64 array component read callback. The + * index of the respective Count u64 array + * component element is passed via the idx + * parameter. The read value of the respective + * Count u64 array component element should be + * passed back via the val parameter. + * @action_write: Synapse action mode write callback. The write value of * the respective Synapse action mode is passed via the * action parameter. - * @device_u8_write: Device u8 component write callback. The write value of + * @device_u8_write: Device u8 component write callback. The write value of * the respective Device u8 component is passed via the val * parameter. - * @count_u8_write: Count u8 component write callback. The write value of + * @count_u8_write: Count u8 component write callback. The write value of * the respective Count u8 component is passed via the val * parameter. - * @signal_u8_write: Signal u8 component write callback. The write value of + * @signal_u8_write: Signal u8 component write callback. The write value of * the respective Signal u8 component is passed via the val * parameter. - * @device_u32_write: Device u32 component write callback. The write value of + * @device_u32_write: Device u32 component write callback. The write value of * the respective Device u32 component is passed via the * val parameter. - * @count_u32_write: Count u32 component write callback. The write value of + * @count_u32_write: Count u32 component write callback. The write value of * the respective Count u32 component is passed via the val * parameter. - * @signal_u32_write: Signal u32 component write callback. The write value of + * @signal_u32_write: Signal u32 component write callback. The write value of * the respective Signal u32 component is passed via the * val parameter. - * @device_u64_write: Device u64 component write callback. The write value of + * @device_u64_write: Device u64 component write callback. The write value of * the respective Device u64 component is passed via the * val parameter. - * @count_u64_write: Count u64 component write callback. The write value of + * @count_u64_write: Count u64 component write callback. The write value of * the respective Count u64 component is passed via the val * parameter. - * @signal_u64_write: Signal u64 component write callback. The write value of + * @signal_u64_write: Signal u64 component write callback. The write value of * the respective Signal u64 component is passed via the * val parameter. + * @signal_array_u32_write: Signal u32 array component write callback. The + * index of the respective Signal u32 array + * component element is passed via the idx + * parameter. The write value of the respective + * Signal u32 array component element is passed via + * the val parameter. + * @device_array_u64_write: Device u64 array component write callback. The + * index of the respective Device u64 array + * component element is passed via the idx + * parameter. The write value of the respective + * Device u64 array component element is passed via + * the val parameter. + * @count_array_u64_write: Count u64 array component write callback. The + * index of the respective Count u64 array + * component element is passed via the idx + * parameter. The write value of the respective + * Count u64 array component element is passed via + * the val parameter. + * @signal_array_u64_write: Signal u64 array component write callback. The + * index of the respective Signal u64 array + * component element is passed via the idx + * parameter. The write value of the respective + * Signal u64 array component element is passed via + * the val parameter. */ struct counter_comp { enum counter_comp_type type; @@ -125,6 +175,17 @@ struct counter_comp { struct counter_count *count, u64 *val); int (*signal_u64_read)(struct counter_device *counter, struct counter_signal *signal, u64 *val); + int (*signal_array_u32_read)(struct counter_device *counter, + struct counter_signal *signal, + size_t idx, u32 *val); + int (*device_array_u64_read)(struct counter_device *counter, + size_t idx, u64 *val); + int (*count_array_u64_read)(struct counter_device *counter, + struct counter_count *count, + size_t idx, u64 *val); + int (*signal_array_u64_read)(struct counter_device *counter, + struct counter_signal *signal, + size_t idx, u64 *val); }; union { int (*action_write)(struct counter_device *counter, @@ -148,6 +209,17 @@ struct counter_comp { struct counter_count *count, u64 val); int (*signal_u64_write)(struct counter_device *counter, struct counter_signal *signal, u64 val); + int (*signal_array_u32_write)(struct counter_device *counter, + struct counter_signal *signal, + size_t idx, u32 val); + int (*device_array_u64_write)(struct counter_device *counter, + size_t idx, u64 val); + int (*count_array_u64_write)(struct counter_device *counter, + struct counter_count *count, + size_t idx, u64 val); + int (*signal_array_u64_write)(struct counter_device *counter, + struct counter_signal *signal, + size_t idx, u64 val); }; }; @@ -452,6 +524,60 @@ struct counter_available { .priv = &(_available), \ } +struct counter_array { + enum counter_comp_type type; + const struct counter_available *avail; + union { + size_t length; + size_t idx; + }; +}; + +#define DEFINE_COUNTER_ARRAY_U64(_name, _length) \ + struct counter_array _name = { \ + .type = COUNTER_COMP_U64, \ + .length = (_length), \ + } + +#define DEFINE_COUNTER_ARRAY_CAPTURE(_name, _length) \ + DEFINE_COUNTER_ARRAY_U64(_name, _length) + +#define DEFINE_COUNTER_ARRAY_POLARITY(_name, _enums, _length) \ + DEFINE_COUNTER_AVAILABLE(_name##_available, _enums); \ + struct counter_array _name = { \ + .type = COUNTER_COMP_SIGNAL_POLARITY, \ + .avail = &(_name##_available), \ + .length = (_length), \ + } + +#define COUNTER_COMP_DEVICE_ARRAY_U64(_name, _read, _write, _array) \ +{ \ + .type = COUNTER_COMP_ARRAY, \ + .name = (_name), \ + .device_array_u64_read = (_read), \ + .device_array_u64_write = (_write), \ + .priv = &(_array), \ +} +#define COUNTER_COMP_COUNT_ARRAY_U64(_name, _read, _write, _array) \ +{ \ + .type = COUNTER_COMP_ARRAY, \ + .name = (_name), \ + .count_array_u64_read = (_read), \ + .count_array_u64_write = (_write), \ + .priv = &(_array), \ +} +#define COUNTER_COMP_SIGNAL_ARRAY_U64(_name, _read, _write, _array) \ +{ \ + .type = COUNTER_COMP_ARRAY, \ + .name = (_name), \ + .signal_array_u64_read = (_read), \ + .signal_array_u64_write = (_write), \ + .priv = &(_array), \ +} + +#define COUNTER_COMP_CAPTURE(_read, _write) \ + COUNTER_COMP_COUNT_U64("capture", _read, _write) + #define COUNTER_COMP_CEILING(_read, _write) \ COUNTER_COMP_COUNT_U64("ceiling", _read, _write) @@ -477,10 +603,31 @@ struct counter_available { #define COUNTER_COMP_FLOOR(_read, _write) \ COUNTER_COMP_COUNT_U64("floor", _read, _write) +#define COUNTER_COMP_POLARITY(_read, _write, _available) \ +{ \ + .type = COUNTER_COMP_SIGNAL_POLARITY, \ + .name = "polarity", \ + .signal_u32_read = (_read), \ + .signal_u32_write = (_write), \ + .priv = &(_available), \ +} + #define COUNTER_COMP_PRESET(_read, _write) \ COUNTER_COMP_COUNT_U64("preset", _read, _write) #define COUNTER_COMP_PRESET_ENABLE(_read, _write) \ COUNTER_COMP_COUNT_BOOL("preset_enable", _read, _write) +#define COUNTER_COMP_ARRAY_CAPTURE(_read, _write, _array) \ + COUNTER_COMP_COUNT_ARRAY_U64("capture", _read, _write, _array) + +#define COUNTER_COMP_ARRAY_POLARITY(_read, _write, _array) \ +{ \ + .type = COUNTER_COMP_ARRAY, \ + .name = "polarity", \ + .signal_array_u32_read = (_read), \ + .signal_array_u32_write = (_write), \ + .priv = &(_array), \ +} + #endif /* _COUNTER_H_ */ diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h index 5fa5957586cf..6802596b017c 100644 --- a/include/linux/iio/consumer.h +++ b/include/linux/iio/consumer.h @@ -13,7 +13,7 @@ struct iio_dev; struct iio_chan_spec; struct device; -struct device_node; +struct fwnode_handle; /** * struct iio_channel - everything needed for a consumer to use a channel @@ -99,26 +99,20 @@ void iio_channel_release_all(struct iio_channel *chan); struct iio_channel *devm_iio_channel_get_all(struct device *dev); /** - * of_iio_channel_get_by_name() - get description of all that is needed to access channel. - * @np: Pointer to consumer device tree node + * fwnode_iio_channel_get_by_name() - get description of all that is needed to access channel. + * @fwnode: Pointer to consumer Firmware node * @consumer_channel: Unique name to identify the channel on the consumer * side. This typically describes the channels use within * the consumer. E.g. 'battery_voltage' */ -#ifdef CONFIG_OF -struct iio_channel *of_iio_channel_get_by_name(struct device_node *np, const char *name); -#else -static inline struct iio_channel * -of_iio_channel_get_by_name(struct device_node *np, const char *name) -{ - return NULL; -} -#endif +struct iio_channel *fwnode_iio_channel_get_by_name(struct fwnode_handle *fwnode, + const char *name); /** - * devm_of_iio_channel_get_by_name() - Resource managed version of of_iio_channel_get_by_name(). + * devm_fwnode_iio_channel_get_by_name() - Resource managed version of + * fwnode_iio_channel_get_by_name(). * @dev: Pointer to consumer device. - * @np: Pointer to consumer device tree node + * @fwnode: Pointer to consumer Firmware node * @consumer_channel: Unique name to identify the channel on the consumer * side. This typically describes the channels use within * the consumer. E.g. 'battery_voltage' @@ -129,9 +123,9 @@ of_iio_channel_get_by_name(struct device_node *np, const char *name) * The allocated iio channel is automatically released when the device is * unbound. */ -struct iio_channel *devm_of_iio_channel_get_by_name(struct device *dev, - struct device_node *np, - const char *consumer_channel); +struct iio_channel *devm_fwnode_iio_channel_get_by_name(struct device *dev, + struct fwnode_handle *fwnode, + const char *consumer_channel); struct iio_cb_buffer; /** diff --git a/include/linux/iio/iio-opaque.h b/include/linux/iio/iio-opaque.h index 6b3586b3f952..d1f8b30a7c8b 100644 --- a/include/linux/iio/iio-opaque.h +++ b/include/linux/iio/iio-opaque.h @@ -11,6 +11,7 @@ * checked by device drivers but should be considered * read-only as this is a core internal bit * @driver_module: used to make it harder to undercut users + * @mlock_key: lockdep class for iio_dev lock * @info_exist_lock: lock to prevent use during removal * @trig_readonly: mark the current trigger immutable * @event_interface: event chrdevs associated with interrupt lines @@ -42,6 +43,7 @@ struct iio_dev_opaque { int currentmode; int id; struct module *driver_module; + struct lock_class_key mlock_key; struct mutex info_exist_lock; bool trig_readonly; struct iio_event_interface *event_interface; diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 5dfbfc991c69..f0ec8a5e5a7a 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -17,7 +17,7 @@ * Currently assumes nano seconds. */ -struct of_phandle_args; +struct fwnode_reference_args; enum iio_shared_by { IIO_SEPARATE, @@ -429,6 +429,8 @@ struct iio_trigger; /* forward declaration */ * provide a custom of_xlate function that reads the * *args* and returns the appropriate index in registered * IIO channels array. + * @fwnode_xlate: fwnode based function pointer to obtain channel specifier index. + * Functionally the same as @of_xlate. * @hwfifo_set_watermark: function pointer to set the current hardware * fifo watermark level; see hwfifo_* entries in * Documentation/ABI/testing/sysfs-bus-iio for details on @@ -508,8 +510,8 @@ struct iio_info { int (*debugfs_reg_access)(struct iio_dev *indio_dev, unsigned reg, unsigned writeval, unsigned *readval); - int (*of_xlate)(struct iio_dev *indio_dev, - const struct of_phandle_args *iiospec); + int (*fwnode_xlate)(struct iio_dev *indio_dev, + const struct fwnode_reference_args *iiospec); int (*hwfifo_set_watermark)(struct iio_dev *indio_dev, unsigned val); int (*hwfifo_flush_to_buffer)(struct iio_dev *indio_dev, unsigned count); diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h index a7aa91f3a8dc..82faa98c719a 100644 --- a/include/linux/iio/types.h +++ b/include/linux/iio/types.h @@ -17,6 +17,8 @@ enum iio_event_info { IIO_EV_INFO_HIGH_PASS_FILTER_3DB, IIO_EV_INFO_LOW_PASS_FILTER_3DB, IIO_EV_INFO_TIMEOUT, + IIO_EV_INFO_RESET_TIMEOUT, + IIO_EV_INFO_TAP2_MIN_DELAY, }; #define IIO_VAL_INT 1 @@ -63,6 +65,7 @@ enum iio_chan_info_enum { IIO_CHAN_INFO_OVERSAMPLING_RATIO, IIO_CHAN_INFO_THERMOCOUPLE_TYPE, IIO_CHAN_INFO_CALIBAMBIENT, + IIO_CHAN_INFO_ZEROPOINT, }; #endif /* _IIO_TYPES_H_ */ diff --git a/include/linux/interconnect-provider.h b/include/linux/interconnect-provider.h index 6bd01f7159c6..cd5c5a27557f 100644 --- a/include/linux/interconnect-provider.h +++ b/include/linux/interconnect-provider.h @@ -123,7 +123,7 @@ void icc_node_add(struct icc_node *node, struct icc_provider *provider); void icc_node_del(struct icc_node *node); int icc_nodes_remove(struct icc_provider *provider); int icc_provider_add(struct icc_provider *provider); -int icc_provider_del(struct icc_provider *provider); +void icc_provider_del(struct icc_provider *provider); struct icc_node_data *of_icc_get_from_provider(struct of_phandle_args *spec); void icc_sync_state(struct device *dev); @@ -172,9 +172,8 @@ static inline int icc_provider_add(struct icc_provider *provider) return -ENOTSUPP; } -static inline int icc_provider_del(struct icc_provider *provider) +static inline void icc_provider_del(struct icc_provider *provider) { - return -ENOTSUPP; } static inline struct icc_node_data *of_icc_get_from_provider(struct of_phandle_args *spec) diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index c12a5930f32c..7c58c44662b8 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -684,6 +684,7 @@ extern int mtd_device_unregister(struct mtd_info *master); extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num); extern int __get_mtd_device(struct mtd_info *mtd); extern void __put_mtd_device(struct mtd_info *mtd); +extern struct mtd_info *of_get_mtd_device_by_node(struct device_node *np); extern struct mtd_info *get_mtd_device_nm(const char *name); extern void put_mtd_device(struct mtd_info *mtd); diff --git a/include/linux/string_helpers.h b/include/linux/string_helpers.h index dc2e726fd820..8530c7328269 100644 --- a/include/linux/string_helpers.h +++ b/include/linux/string_helpers.h @@ -128,4 +128,9 @@ static inline const char *str_enabled_disabled(bool v) return v ? "enabled" : "disabled"; } +static inline const char *str_read_write(bool v) +{ + return v ? "read" : "write"; +} + #endif diff --git a/include/linux/units.h b/include/linux/units.h index 681fc652e3d7..2793a41e73a2 100644 --- a/include/linux/units.h +++ b/include/linux/units.h @@ -20,6 +20,9 @@ #define PICO 1000000000000ULL #define FEMTO 1000000000000000ULL +#define NANOHZ_PER_HZ 1000000000UL +#define MICROHZ_PER_HZ 1000000UL +#define MILLIHZ_PER_HZ 1000UL #define HZ_PER_KHZ 1000UL #define KHZ_PER_MHZ 1000UL #define HZ_PER_MHZ 1000000UL diff --git a/include/trace/events/habanalabs.h b/include/trace/events/habanalabs.h new file mode 100644 index 000000000000..f05c5fa668a2 --- /dev/null +++ b/include/trace/events/habanalabs.h @@ -0,0 +1,93 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * Copyright 2016-2021 HabanaLabs, Ltd. + * All Rights Reserved. + * + */ + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM habanalabs + +#if !defined(_TRACE_HABANALABS_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_HABANALABS_H + +#include <linux/tracepoint.h> + +DECLARE_EVENT_CLASS(habanalabs_mmu_template, + TP_PROTO(struct device *dev, u64 virt_addr, u64 phys_addr, u32 page_size, bool flush_pte), + + TP_ARGS(dev, virt_addr, phys_addr, page_size, flush_pte), + + TP_STRUCT__entry( + __string(dname, dev_name(dev)) + __field(u64, virt_addr) + __field(u64, phys_addr) + __field(u32, page_size) + __field(u8, flush_pte) + ), + + TP_fast_assign( + __assign_str(dname, dev_name(dev)); + __entry->virt_addr = virt_addr; + __entry->phys_addr = phys_addr; + __entry->page_size = page_size; + __entry->flush_pte = flush_pte; + ), + + TP_printk("%s: vaddr: %#llx, paddr: %#llx, psize: %#x, flush: %s", + __get_str(dname), + __entry->virt_addr, + __entry->phys_addr, + __entry->page_size, + __entry->flush_pte ? "true" : "false") +); + +DEFINE_EVENT(habanalabs_mmu_template, habanalabs_mmu_map, + TP_PROTO(struct device *dev, u64 virt_addr, u64 phys_addr, u32 page_size, bool flush_pte), + TP_ARGS(dev, virt_addr, phys_addr, page_size, flush_pte)); + +DEFINE_EVENT(habanalabs_mmu_template, habanalabs_mmu_unmap, + TP_PROTO(struct device *dev, u64 virt_addr, u64 phys_addr, u32 page_size, bool flush_pte), + TP_ARGS(dev, virt_addr, phys_addr, page_size, flush_pte)); + +DECLARE_EVENT_CLASS(habanalabs_dma_alloc_template, + TP_PROTO(struct device *dev, u64 cpu_addr, u64 dma_addr, size_t size, const char *caller), + + TP_ARGS(dev, cpu_addr, dma_addr, size, caller), + + TP_STRUCT__entry( + __string(dname, dev_name(dev)) + __field(u64, cpu_addr) + __field(u64, dma_addr) + __field(u32, size) + __field(const char *, caller) + ), + + TP_fast_assign( + __assign_str(dname, dev_name(dev)); + __entry->cpu_addr = cpu_addr; + __entry->dma_addr = dma_addr; + __entry->size = size; + __entry->caller = caller; + ), + + TP_printk("%s: cpu_addr: %#llx, dma_addr: %#llx, size: %#x, caller: %s", + __get_str(dname), + __entry->cpu_addr, + __entry->dma_addr, + __entry->size, + __entry->caller) +); + +DEFINE_EVENT(habanalabs_dma_alloc_template, habanalabs_dma_alloc, + TP_PROTO(struct device *dev, u64 cpu_addr, u64 dma_addr, size_t size, const char *caller), + TP_ARGS(dev, cpu_addr, dma_addr, size, caller)); + +DEFINE_EVENT(habanalabs_dma_alloc_template, habanalabs_dma_free, + TP_PROTO(struct device *dev, u64 cpu_addr, u64 dma_addr, size_t size, const char *caller), + TP_ARGS(dev, cpu_addr, dma_addr, size, caller)); + +#endif /* if !defined(_TRACE_HABANALABS_H) || defined(TRACE_HEADER_MULTI_READ) */ + +/* This part must be outside protection */ +#include <trace/define_trace.h> diff --git a/include/uapi/linux/counter.h b/include/uapi/linux/counter.h index 96c5ffd368ad..8ab12d731e3b 100644 --- a/include/uapi/linux/counter.h +++ b/include/uapi/linux/counter.h @@ -63,6 +63,8 @@ enum counter_event_type { COUNTER_EVENT_INDEX, /* State of counter is changed */ COUNTER_EVENT_CHANGE_OF_STATE, + /* Count value captured */ + COUNTER_EVENT_CAPTURE, }; /** @@ -153,4 +155,10 @@ enum counter_synapse_action { COUNTER_SYNAPSE_ACTION_BOTH_EDGES, }; +/* Signal polarity values */ +enum counter_signal_polarity { + COUNTER_SIGNAL_POLARITY_POSITIVE, + COUNTER_SIGNAL_POLARITY_NEGATIVE, +}; + #endif /* _UAPI_COUNTER_H_ */ diff --git a/include/uapi/linux/iio/types.h b/include/uapi/linux/iio/types.h index 472cead10d8d..c79f2f046a0b 100644 --- a/include/uapi/linux/iio/types.h +++ b/include/uapi/linux/iio/types.h @@ -95,6 +95,12 @@ enum iio_modifier { IIO_MOD_ETHANOL, IIO_MOD_H2, IIO_MOD_O2, + IIO_MOD_LINEAR_X, + IIO_MOD_LINEAR_Y, + IIO_MOD_LINEAR_Z, + IIO_MOD_PITCH, + IIO_MOD_YAW, + IIO_MOD_ROLL, }; enum iio_event_type { @@ -105,6 +111,7 @@ enum iio_event_type { IIO_EV_TYPE_MAG_ADAPTIVE, IIO_EV_TYPE_CHANGE, IIO_EV_TYPE_MAG_REFERENCED, + IIO_EV_TYPE_GESTURE, }; enum iio_event_direction { @@ -112,7 +119,8 @@ enum iio_event_direction { IIO_EV_DIR_RISING, IIO_EV_DIR_FALLING, IIO_EV_DIR_NONE, + IIO_EV_DIR_SINGLETAP, + IIO_EV_DIR_DOUBLETAP, }; #endif /* _UAPI_IIO_TYPES_H_ */ - diff --git a/include/uapi/misc/habanalabs.h b/include/uapi/misc/habanalabs.h index 5d06d5c74dd1..e00ebe05097d 100644 --- a/include/uapi/misc/habanalabs.h +++ b/include/uapi/misc/habanalabs.h @@ -707,6 +707,25 @@ enum hl_server_type { HL_SERVER_GAUDI2_HLS2 = 5 }; +/* + * Notifier event values - for the notification mechanism and the HL_INFO_GET_EVENTS command + * + * HL_NOTIFIER_EVENT_TPC_ASSERT - Indicates TPC assert event + * HL_NOTIFIER_EVENT_UNDEFINED_OPCODE - Indicates undefined operation code + * HL_NOTIFIER_EVENT_DEVICE_RESET - Indicates device requires a reset + * HL_NOTIFIER_EVENT_CS_TIMEOUT - Indicates CS timeout error + * HL_NOTIFIER_EVENT_DEVICE_UNAVAILABLE - Indicates device is unavailable + * HL_NOTIFIER_EVENT_USER_ENGINE_ERR - Indicates device engine in error state + * HL_NOTIFIER_EVENT_GENERAL_HW_ERR - Indicates device HW error + */ +#define HL_NOTIFIER_EVENT_TPC_ASSERT (1ULL << 0) +#define HL_NOTIFIER_EVENT_UNDEFINED_OPCODE (1ULL << 1) +#define HL_NOTIFIER_EVENT_DEVICE_RESET (1ULL << 2) +#define HL_NOTIFIER_EVENT_CS_TIMEOUT (1ULL << 3) +#define HL_NOTIFIER_EVENT_DEVICE_UNAVAILABLE (1ULL << 4) +#define HL_NOTIFIER_EVENT_USER_ENGINE_ERR (1ULL << 5) +#define HL_NOTIFIER_EVENT_GENERAL_HW_ERR (1ULL << 6) + /* Opcode for management ioctl * * HW_IP_INFO - Receive information about different IP blocks in the @@ -754,6 +773,7 @@ enum hl_server_type { * Razwi initiator. * Razwi cause, was it a page fault or MMU access error. * HL_INFO_DEV_MEM_ALLOC_PAGE_SIZES - Retrieve valid page sizes for device memory allocation + * HL_INFO_SECURED_ATTESTATION - Retrieve attestation report of the boot. * HL_INFO_REGISTER_EVENTFD - Register eventfd for event notifications. * HL_INFO_UNREGISTER_EVENTFD - Unregister eventfd * HL_INFO_GET_EVENTS - Retrieve the last occurred events @@ -783,14 +803,19 @@ enum hl_server_type { #define HL_INFO_CS_TIMEOUT_EVENT 24 #define HL_INFO_RAZWI_EVENT 25 #define HL_INFO_DEV_MEM_ALLOC_PAGE_SIZES 26 +#define HL_INFO_SECURED_ATTESTATION 27 #define HL_INFO_REGISTER_EVENTFD 28 #define HL_INFO_UNREGISTER_EVENTFD 29 #define HL_INFO_GET_EVENTS 30 #define HL_INFO_UNDEFINED_OPCODE_EVENT 31 +#define HL_INFO_ENGINE_STATUS 32 #define HL_INFO_VERSION_MAX_LEN 128 #define HL_INFO_CARD_NAME_MAX_LEN 16 +/* Maximum buffer size for retrieving engines status */ +#define HL_ENGINES_DATA_MAX_SIZE SZ_1M + /** * struct hl_info_hw_ip_info - hardware information on various IPs in the ASIC * @sram_base_address: The first SRAM physical base address that is free to be @@ -821,6 +846,7 @@ enum hl_server_type { * @tpc_enabled_mask: Bit-mask that represents which TPCs are enabled. Relevant * for Goya/Gaudi only. * @dram_enabled: Whether the DRAM is enabled. + * @security_enabled: Whether security is enabled on device. * @mme_master_slave_mode: Indicate whether the MME is working in master/slave * configuration. Relevant for Greco and later. * @cpucp_version: The CPUCP f/w version. @@ -852,7 +878,7 @@ struct hl_info_hw_ip_info { __u32 psoc_pci_pll_div_factor; __u8 tpc_enabled_mask; __u8 dram_enabled; - __u8 reserved; + __u8 security_enabled; __u8 mme_master_slave_mode; __u8 cpucp_version[HL_INFO_VERSION_MAX_LEN]; __u8 card_name[HL_INFO_CARD_NAME_MAX_LEN]; @@ -876,13 +902,13 @@ struct hl_info_hw_idle { __u32 is_idle; /* * Bitmask of busy engines. - * Bits definition is according to `enum <chip>_enging_id'. + * Bits definition is according to `enum <chip>_engine_id'. */ __u32 busy_engines_mask; /* * Extended Bitmask of busy engines. - * Bits definition is according to `enum <chip>_enging_id'. + * Bits definition is according to `enum <chip>_engine_id'. */ __u64 busy_engines_mask_ext[HL_BUSY_ENGINES_MASK_EXT_SIZE]; }; @@ -1078,12 +1104,12 @@ struct hl_info_razwi_event { * struct hl_info_undefined_opcode_event - info about last undefined opcode error * @timestamp: timestamp of the undefined opcode error * @cb_addr_streams: CB addresses (per stream) that are currently exists in the PQ - * entiers. In case all streams array entries are + * entries. In case all streams array entries are * filled with values, it means the execution was in Lower-CP. * @cq_addr: the address of the current handled command buffer * @cq_size: the size of the current handled command buffer * @cb_addr_streams_len: num of streams - actual len of cb_addr_streams array. - * should be equal to 1 incase of undefined opcode + * should be equal to 1 in case of undefined opcode * in Upper-CP (specific stream) and equal to 4 incase * of undefined opcode in Lower-CP. * @engine_id: engine-id that the error occurred on @@ -1109,6 +1135,45 @@ struct hl_info_dev_memalloc_page_sizes { __u64 page_order_bitmask; }; +#define SEC_PCR_DATA_BUF_SZ 256 +#define SEC_PCR_QUOTE_BUF_SZ 510 /* (512 - 2) 2 bytes used for size */ +#define SEC_SIGNATURE_BUF_SZ 255 /* (256 - 1) 1 byte used for size */ +#define SEC_PUB_DATA_BUF_SZ 510 /* (512 - 2) 2 bytes used for size */ +#define SEC_CERTIFICATE_BUF_SZ 2046 /* (2048 - 2) 2 bytes used for size */ + +/* + * struct hl_info_sec_attest - attestation report of the boot + * @nonce: number only used once. random number provided by host. this also passed to the quote + * command as a qualifying data. + * @pcr_quote_len: length of the attestation quote data (bytes) + * @pub_data_len: length of the public data (bytes) + * @certificate_len: length of the certificate (bytes) + * @pcr_num_reg: number of PCR registers in the pcr_data array + * @pcr_reg_len: length of each PCR register in the pcr_data array (bytes) + * @quote_sig_len: length of the attestation report signature (bytes) + * @pcr_data: raw values of the PCR registers + * @pcr_quote: attestation report data structure + * @quote_sig: signature structure of the attestation report + * @public_data: public key for the signed attestation + * (outPublic + name + qualifiedName) + * @certificate: certificate for the attestation signing key + */ +struct hl_info_sec_attest { + __u32 nonce; + __u16 pcr_quote_len; + __u16 pub_data_len; + __u16 certificate_len; + __u8 pcr_num_reg; + __u8 pcr_reg_len; + __u8 quote_sig_len; + __u8 pcr_data[SEC_PCR_DATA_BUF_SZ]; + __u8 pcr_quote[SEC_PCR_QUOTE_BUF_SZ]; + __u8 quote_sig[SEC_SIGNATURE_BUF_SZ]; + __u8 public_data[SEC_PUB_DATA_BUF_SZ]; + __u8 certificate[SEC_CERTIFICATE_BUF_SZ]; + __u8 pad0[2]; +}; + enum gaudi_dcores { HL_GAUDI_WS_DCORE, HL_GAUDI_WN_DCORE, @@ -1130,6 +1195,11 @@ enum gaudi_dcores { * resolution. Currently not in use. * @pll_index: Index as defined in hl_<asic type>_pll_index enumeration. * @eventfd: event file descriptor for event notifications. + * @user_buffer_actual_size: Actual data size which was copied to user allocated buffer by the + * driver. It is possible for the user to allocate buffer larger than + * needed, hence updating this variable so user will know the exact amount + * of bytes copied by the kernel to the buffer. + * @sec_attest_nonce: Nonce number used for attestation report. * @pad: Padding to 64 bit. */ struct hl_info_args { @@ -1143,6 +1213,8 @@ struct hl_info_args { __u32 period_ms; __u32 pll_index; __u32 eventfd; + __u32 user_buffer_actual_size; + __u32 sec_attest_nonce; }; __u32 pad; @@ -1337,17 +1409,47 @@ struct hl_cs_chunk { #define HL_CS_FLAGS_RESERVE_SIGNALS_ONLY 0x1000 #define HL_CS_FLAGS_UNRESERVE_SIGNALS_ONLY 0x2000 +/* + * The engine cores CS is merged into the existing CS ioctls. + * Use it to control the engine cores mode. + */ +#define HL_CS_FLAGS_ENGINE_CORE_COMMAND 0x4000 + #define HL_CS_STATUS_SUCCESS 0 #define HL_MAX_JOBS_PER_CS 512 +/* HL_ENGINE_CORE_ values + * + * HL_ENGINE_CORE_HALT: engine core halt + * HL_ENGINE_CORE_RUN: engine core run + */ +#define HL_ENGINE_CORE_HALT (1 << 0) +#define HL_ENGINE_CORE_RUN (1 << 1) + struct hl_cs_in { - /* this holds address of array of hl_cs_chunk for restore phase */ - __u64 chunks_restore; + union { + struct { + /* this holds address of array of hl_cs_chunk for restore phase */ + __u64 chunks_restore; + + /* holds address of array of hl_cs_chunk for execution phase */ + __u64 chunks_execute; + }; + + /* Valid only when HL_CS_FLAGS_ENGINE_CORE_COMMAND is set */ + struct { + /* this holds address of array of uint32 for engine_cores */ + __u64 engine_cores; - /* holds address of array of hl_cs_chunk for execution phase */ - __u64 chunks_execute; + /* number of engine cores in engine_cores array */ + __u32 num_engine_cores; + + /* the core command to be sent towards engine cores */ + __u32 core_command; + }; + }; union { /* @@ -1412,7 +1514,7 @@ struct hl_cs_out { /* Valid only when HL_CS_FLAGS_RESERVE_SIGNALS_ONLY is set */ struct { - /* This is the resereved signal handle id */ + /* This is the reserved signal handle id */ __u32 handle_id; /* This is the signals count */ @@ -1875,21 +1977,6 @@ struct hl_debug_args { }; /* - * Notifier event values - for the notification mechanism and the HL_INFO_GET_EVENTS command - * - * HL_NOTIFIER_EVENT_TPC_ASSERT - Indicates TPC assert event - * HL_NOTIFIER_EVENT_UNDEFINED_OPCODE - Indicates undefined operation code - * HL_NOTIFIER_EVENT_DEVICE_RESET - Indicates device requires a reset - * HL_NOTIFIER_EVENT_CS_TIMEOUT - Indicates CS timeout error - * HL_NOTIFIER_EVENT_DEVICE_UNAVAILABLE - Indicates device is unavailable - */ -#define HL_NOTIFIER_EVENT_TPC_ASSERT (1ULL << 0) -#define HL_NOTIFIER_EVENT_UNDEFINED_OPCODE (1ULL << 1) -#define HL_NOTIFIER_EVENT_DEVICE_RESET (1ULL << 2) -#define HL_NOTIFIER_EVENT_CS_TIMEOUT (1ULL << 3) -#define HL_NOTIFIER_EVENT_DEVICE_UNAVAILABLE (1ULL << 4) - -/* * Various information operations such as: * - H/W IP information * - Current dram usage diff --git a/tools/iio/iio_event_monitor.c b/tools/iio/iio_event_monitor.c index 2f4581658859..0a5c2bb60030 100644 --- a/tools/iio/iio_event_monitor.c +++ b/tools/iio/iio_event_monitor.c @@ -69,12 +69,15 @@ static const char * const iio_ev_type_text[] = { [IIO_EV_TYPE_MAG_ADAPTIVE] = "mag_adaptive", [IIO_EV_TYPE_CHANGE] = "change", [IIO_EV_TYPE_MAG_REFERENCED] = "mag_referenced", + [IIO_EV_TYPE_GESTURE] = "gesture", }; static const char * const iio_ev_dir_text[] = { [IIO_EV_DIR_EITHER] = "either", [IIO_EV_DIR_RISING] = "rising", - [IIO_EV_DIR_FALLING] = "falling" + [IIO_EV_DIR_FALLING] = "falling", + [IIO_EV_DIR_SINGLETAP] = "singletap", + [IIO_EV_DIR_DOUBLETAP] = "doubletap", }; static const char * const iio_modifier_names[] = { @@ -122,6 +125,12 @@ static const char * const iio_modifier_names[] = { [IIO_MOD_PM4] = "pm4", [IIO_MOD_PM10] = "pm10", [IIO_MOD_O2] = "o2", + [IIO_MOD_LINEAR_X] = "linear_x", + [IIO_MOD_LINEAR_Y] = "linear_y", + [IIO_MOD_LINEAR_Z] = "linear_z", + [IIO_MOD_PITCH] = "pitch", + [IIO_MOD_YAW] = "yaw", + [IIO_MOD_ROLL] = "roll", }; static bool event_is_known(struct iio_event_data *event) @@ -227,6 +236,7 @@ static bool event_is_known(struct iio_event_data *event) case IIO_EV_TYPE_THRESH_ADAPTIVE: case IIO_EV_TYPE_MAG_ADAPTIVE: case IIO_EV_TYPE_CHANGE: + case IIO_EV_TYPE_GESTURE: break; default: return false; @@ -236,6 +246,8 @@ static bool event_is_known(struct iio_event_data *event) case IIO_EV_DIR_EITHER: case IIO_EV_DIR_RISING: case IIO_EV_DIR_FALLING: + case IIO_EV_DIR_SINGLETAP: + case IIO_EV_DIR_DOUBLETAP: case IIO_EV_DIR_NONE: break; default: |