Merge tag 'usb-4.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some USB driver fixes for 4.3-rc3.

  There's the usual assortment of new device ids, combined with xhci and
  gadget driver fixes.  Full details in the shortlog.  All of these have
  been in linux-next with no reported problems"

* tag 'usb-4.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (34 commits)
  MAINTAINERS: remove amd5536udc USB gadget driver maintainer
  USB: whiteheat: fix potential null-deref at probe
  xhci: init command timeout timer earlier to avoid deleting it uninitialized
  xhci: change xhci 1.0 only restrictions to support xhci 1.1
  usb: xhci: exit early in xhci_setup_device() if we're halted or dying
  usb: xhci: stop everything on the first call to xhci_stop
  usb: xhci: Clear XHCI_STATE_DYING on start
  usb: xhci: lock mutex on xhci_stop
  xhci: Move xhci_pme_quirk() behind #ifdef CONFIG_PM
  xhci: give command abortion one more chance before killing xhci
  usb: Use the USB_SS_MULT() macro to get the burst multiplier.
  usb: dwc3: gadget: Fix BUG in RT config
  usb: musb: fix cppi channel teardown for isoch transfer
  usb: phy: isp1301: Export I2C module alias information
  usb: gadget: drop null test before destroy functions
  usb: gadget: dummy_hcd: in transfer(), return data sent, not limit
  usb: gadget: dummy_hcd: fix rescan logic for transfer
  usb: gadget: dummy_hcd: fix unneeded else-if condition
  usb: gadget: dummy_hcd: emulate sending zlp in packet logic
  usb: musb: dsps: fix polling in device-only mode
  ...

29 files changed, 288 insertions, 177 deletions

diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
index d71ef07bca5d..a057b75ba4b5 100644
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
@@ -6,6 +6,7 @@ Required properties:
 	"lsi,zevio-usb"
 	"qcom,ci-hdrc"
 	"chipidea,usb2"
+	"xlnx,zynq-usb-2.20a"
 - reg: base address and length of the registers
 - interrupts: interrupt for the USB controller
 
diff --git a/MAINTAINERS b/MAINTAINERS
index a3077df7e68a..9f6685f6c5a9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -615,9 +615,8 @@ F:	Documentation/hwmon/fam15h_power
 F:	drivers/hwmon/fam15h_power.c
 
 AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
-M:	Thomas Dahlmann <dahlmann.thomas@arcor.de>
 L:	linux-geode@lists.infradead.org (moderated for non-subscribers)
-S:	Supported
+S:	Orphan
 F:	drivers/usb/gadget/udc/amd5536udc.*
 
 AMD GEODE PROCESSOR/CHIPSET SUPPORT
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 867e9f3f3859..dcc50c878159 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -61,7 +61,7 @@ static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
 	{ .compatible = "fsl,imx27-usb", .data = &imx27_usb_data},
 	{ .compatible = "fsl,imx6q-usb", .data = &imx6q_usb_data},
 	{ .compatible = "fsl,imx6sl-usb", .data = &imx6sl_usb_data},
-	{ .compatible = "fsl,imx6sx-usb", .data = &imx6sl_usb_data},
+	{ .compatible = "fsl,imx6sx-usb", .data = &imx6sx_usb_data},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, ci_hdrc_imx_dt_ids);
diff --git a/drivers/usb/chipidea/ci_hdrc_usb2.c b/drivers/usb/chipidea/ci_hdrc_usb2.c
index 9eae1a16cef9..4456d2cf80ff 100644
--- a/drivers/usb/chipidea/ci_hdrc_usb2.c
+++ b/drivers/usb/chipidea/ci_hdrc_usb2.c
@@ -12,6 +12,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_platform.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/usb/chipidea.h>
@@ -30,18 +31,36 @@ static const struct ci_hdrc_platform_data ci_default_pdata = {
 	.flags		= CI_HDRC_DISABLE_STREAMING,
 };
 
+static struct ci_hdrc_platform_data ci_zynq_pdata = {
+	.capoffset	= DEF_CAPOFFSET,
+};
+
+static const struct of_device_id ci_hdrc_usb2_of_match[] = {
+	{ .compatible = "chipidea,usb2"},
+	{ .compatible = "xlnx,zynq-usb-2.20a", .data = &ci_zynq_pdata},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ci_hdrc_usb2_of_match);
+
 static int ci_hdrc_usb2_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct ci_hdrc_usb2_priv *priv;
 	struct ci_hdrc_platform_data *ci_pdata = dev_get_platdata(dev);
 	int ret;
+	const struct of_device_id *match;
 
 	if (!ci_pdata) {
 		ci_pdata = devm_kmalloc(dev, sizeof(*ci_pdata), GFP_KERNEL);
 		*ci_pdata = ci_default_pdata;	/* struct copy */
 	}
 
+	match = of_match_device(ci_hdrc_usb2_of_match, &pdev->dev);
+	if (match && match->data) {
+		/* struct copy */
+		*ci_pdata = *(struct ci_hdrc_platform_data *)match->data;
+	}
+
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
@@ -96,12 +115,6 @@ static int ci_hdrc_usb2_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id ci_hdrc_usb2_of_match[] = {
-	{ .compatible = "chipidea,usb2" },
-	{ }
-};
-MODULE_DEVICE_TABLE(of, ci_hdrc_usb2_of_match);
-
 static struct platform_driver ci_hdrc_usb2_driver = {
 	.probe	= ci_hdrc_usb2_probe,
 	.remove	= ci_hdrc_usb2_remove,
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index a637da25dda0..8223fe73ea85 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -656,6 +656,44 @@ __acquires(hwep->lock)
 	return 0;
 }
 
+static int _ep_set_halt(struct usb_ep *ep, int value, bool check_transfer)
+{
+	struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
+	int direction, retval = 0;
+	unsigned long flags;
+
+	if (ep == NULL || hwep->ep.desc == NULL)
+		return -EINVAL;
+
+	if (usb_endpoint_xfer_isoc(hwep->ep.desc))
+		return -EOPNOTSUPP;
+
+	spin_lock_irqsave(hwep->lock, flags);
+
+	if (value && hwep->dir == TX && check_transfer &&
+		!list_empty(&hwep->qh.queue) &&
+			!usb_endpoint_xfer_control(hwep->ep.desc)) {
+		spin_unlock_irqrestore(hwep->lock, flags);
+		return -EAGAIN;
+	}
+
+	direction = hwep->dir;
+	do {
+		retval |= hw_ep_set_halt(hwep->ci, hwep->num, hwep->dir, value);
+
+		if (!value)
+			hwep->wedge = 0;
+
+		if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
+			hwep->dir = (hwep->dir == TX) ? RX : TX;
+
+	} while (hwep->dir != direction);
+
+	spin_unlock_irqrestore(hwep->lock, flags);
+	return retval;
+}
+
+
 /**
  * _gadget_stop_activity: stops all USB activity, flushes & disables all endpts
  * @gadget: gadget
@@ -1051,7 +1089,7 @@ __acquires(ci->lock)
 				num += ci->hw_ep_max / 2;
 
 			spin_unlock(&ci->lock);
-			err = usb_ep_set_halt(&ci->ci_hw_ep[num].ep);
+			err = _ep_set_halt(&ci->ci_hw_ep[num].ep, 1, false);
 			spin_lock(&ci->lock);
 			if (!err)
 				isr_setup_status_phase(ci);
@@ -1117,8 +1155,8 @@ delegate:
 
 	if (err < 0) {
 		spin_unlock(&ci->lock);
-		if (usb_ep_set_halt(&hwep->ep))
-			dev_err(ci->dev, "error: ep_set_halt\n");
+		if (_ep_set_halt(&hwep->ep, 1, false))
+			dev_err(ci->dev, "error: _ep_set_halt\n");
 		spin_lock(&ci->lock);
 	}
 }
@@ -1149,9 +1187,9 @@ __acquires(ci->lock)
 					err = isr_setup_status_phase(ci);
 				if (err < 0) {
 					spin_unlock(&ci->lock);
-					if (usb_ep_set_halt(&hwep->ep))
+					if (_ep_set_halt(&hwep->ep, 1, false))
 						dev_err(ci->dev,
-							"error: ep_set_halt\n");
+						"error: _ep_set_halt\n");
 					spin_lock(&ci->lock);
 				}
 			}
@@ -1397,41 +1435,7 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
  */
 static int ep_set_halt(struct usb_ep *ep, int value)
 {
-	struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
-	int direction, retval = 0;
-	unsigned long flags;
-
-	if (ep == NULL || hwep->ep.desc == NULL)
-		return -EINVAL;
-
-	if (usb_endpoint_xfer_isoc(hwep->ep.desc))
-		return -EOPNOTSUPP;
-
-	spin_lock_irqsave(hwep->lock, flags);
-
-#ifndef STALL_IN
-	/* g_file_storage MS compliant but g_zero fails chapter 9 compliance */
-	if (value && hwep->type == USB_ENDPOINT_XFER_BULK && hwep->dir == TX &&
-	    !list_empty(&hwep->qh.queue)) {
-		spin_unlock_irqrestore(hwep->lock, flags);
-		return -EAGAIN;
-	}
-#endif
-
-	direction = hwep->dir;
-	do {
-		retval |= hw_ep_set_halt(hwep->ci, hwep->num, hwep->dir, value);
-
-		if (!value)
-			hwep->wedge = 0;
-
-		if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
-			hwep->dir = (hwep->dir == TX) ? RX : TX;
-
-	} while (hwep->dir != direction);
-
-	spin_unlock_irqrestore(hwep->lock, flags);
-	return retval;
+	return _ep_set_halt(ep, value, true);
 }
 
 /**
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index b2a540b43f97..b9ddf0c1ffe5 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -112,7 +112,7 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
 				cfgno, inum, asnum, ep->desc.bEndpointAddress);
 		ep->ss_ep_comp.bmAttributes = 16;
 	} else if (usb_endpoint_xfer_isoc(&ep->desc) &&
-			desc->bmAttributes > 2) {
+		   USB_SS_MULT(desc->bmAttributes) > 3) {
 		dev_warn(ddev, "Isoc endpoint has Mult of %d in "
 				"config %d interface %d altsetting %d ep %d: "
 				"setting to 3\n", desc->bmAttributes + 1,
@@ -121,7 +121,8 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
 	}
 
 	if (usb_endpoint_xfer_isoc(&ep->desc))
-		max_tx = (desc->bMaxBurst + 1) * (desc->bmAttributes + 1) *
+		max_tx = (desc->bMaxBurst + 1) *
+			(USB_SS_MULT(desc->bmAttributes)) *
 			usb_endpoint_maxp(&ep->desc);
 	else if (usb_endpoint_xfer_int(&ep->desc))
 		max_tx = usb_endpoint_maxp(&ep->desc) *
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index a5a1b7c45743..22e9606d8e08 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -514,8 +514,6 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 		goto err1;
 	}
 
-	dwc3_omap_enable_irqs(omap);
-
 	ret = dwc3_omap_extcon_register(omap);
 	if (ret < 0)
 		goto err2;
@@ -526,6 +524,8 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 		goto err3;
 	}
 
+	dwc3_omap_enable_irqs(omap);
+
 	return 0;
 
 err3:
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 0c25704dcb6b..1e8bdf817811 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2665,8 +2665,6 @@ static irqreturn_t dwc3_interrupt(int irq, void *_dwc)
 	int				i;
 	irqreturn_t			ret = IRQ_NONE;
 
-	spin_lock(&dwc->lock);
-
 	for (i = 0; i < dwc->num_event_buffers; i++) {
 		irqreturn_t status;
 
@@ -2675,8 +2673,6 @@ static irqreturn_t dwc3_interrupt(int irq, void *_dwc)
 			ret = status;
 	}
 
-	spin_unlock(&dwc->lock);
-
 	return ret;
 }
 
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 978435a51038..6399c106a3a5 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -186,6 +186,7 @@ void usb_ep_autoconfig_reset (struct usb_gadget *gadget)
 
 	list_for_each_entry (ep, &gadget->ep_list, ep_list) {
 		ep->claimed = false;
+		ep->driver_data = NULL;
 	}
 	gadget->in_epnum = 0;
 	gadget->out_epnum = 0;
diff --git a/drivers/usb/gadget/udc/amd5536udc.c b/drivers/usb/gadget/udc/amd5536udc.c
index fdacddb18c00..175ca93fe5e2 100644
--- a/drivers/usb/gadget/udc/amd5536udc.c
+++ b/drivers/usb/gadget/udc/amd5536udc.c
@@ -3138,8 +3138,8 @@ static void udc_pci_remove(struct pci_dev *pdev)
 	writel(AMD_BIT(UDC_DEVCFG_SOFTRESET), &dev->regs->cfg);
 	if (dev->irq_registered)
 		free_irq(pdev->irq, dev);
-	if (dev->regs)
-		iounmap(dev->regs);
+	if (dev->virt_addr)
+		iounmap(dev->virt_addr);
 	if (dev->mem_region)
 		release_mem_region(pci_resource_start(pdev, 0),
 				pci_resource_len(pdev, 0));
@@ -3226,17 +3226,13 @@ static int udc_pci_probe(
 
 	/* init */
 	dev = kzalloc(sizeof(struct udc), GFP_KERNEL);
-	if (!dev) {
-		retval = -ENOMEM;
-		goto finished;
-	}
+	if (!dev)
+		return -ENOMEM;
 
 	/* pci setup */
 	if (pci_enable_device(pdev) < 0) {
-		kfree(dev);
-		dev = NULL;
 		retval = -ENODEV;
-		goto finished;
+		goto err_pcidev;
 	}
 	dev->active = 1;
 
@@ -3246,28 +3242,22 @@ static int udc_pci_probe(
 
 	if (!request_mem_region(resource, len, name)) {
 		dev_dbg(&pdev->dev, "pci device used already\n");
-		kfree(dev);
-		dev = NULL;
 		retval = -EBUSY;
-		goto finished;
+		goto err_memreg;
 	}
 	dev->mem_region = 1;
 
 	dev->virt_addr = ioremap_nocache(resource, len);
 	if (dev->virt_addr == NULL) {
 		dev_dbg(&pdev->dev, "start address cannot be mapped\n");
-		kfree(dev);
-		dev = NULL;
 		retval = -EFAULT;
-		goto finished;
+		goto err_ioremap;
 	}
 
 	if (!pdev->irq) {
 		dev_err(&pdev->dev, "irq not set\n");
-		kfree(dev);
-		dev = NULL;
 		retval = -ENODEV;
-		goto finished;
+		goto err_irq;
 	}
 
 	spin_lock_init(&dev->lock);
@@ -3283,10 +3273,8 @@ static int udc_pci_probe(
 
 	if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) {
 		dev_dbg(&pdev->dev, "request_irq(%d) fail\n", pdev->irq);
-		kfree(dev);
-		dev = NULL;
 		retval = -EBUSY;
-		goto finished;
+		goto err_irq;
 	}
 	dev->irq_registered = 1;
 
@@ -3314,8 +3302,17 @@ static int udc_pci_probe(
 		return 0;
 
 finished:
-	if (dev)
-		udc_pci_remove(pdev);
+	udc_pci_remove(pdev);
+	return retval;
+
+err_irq:
+	iounmap(dev->virt_addr);
+err_ioremap:
+	release_mem_region(resource, len);
+err_memreg:
+	pci_disable_device(pdev);
+err_pcidev:
+	kfree(dev);
 	return retval;
 }
 
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 3dfada8d6061..f0f2b066ac08 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -2002,6 +2002,17 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
 		ep->udc = udc;
 		INIT_LIST_HEAD(&ep->queue);
 
+		if (ep->index == 0) {
+			ep->ep.caps.type_control = true;
+		} else {
+			ep->ep.caps.type_iso = ep->can_isoc;
+			ep->ep.caps.type_bulk = true;
+			ep->ep.caps.type_int = true;
+		}
+
+		ep->ep.caps.dir_in = true;
+		ep->ep.caps.dir_out = true;
+
 		if (i)
 			list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
 
diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c
index 5c8f4effb62a..ccb9c213cc9f 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_core.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_core.c
@@ -324,8 +324,7 @@ static void bdc_mem_free(struct bdc *bdc)
 				bdc->scratchpad.buff, bdc->scratchpad.sp_dma);
 
 	/* Destroy the dma pools */
-	if (bdc->bd_table_pool)
-		dma_pool_destroy(bdc->bd_table_pool);
+	dma_pool_destroy(bdc->bd_table_pool);
 
 	/* Free the bdc_ep array */
 	kfree(bdc->bdc_ep_array);
diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
index 1379ad40d864..27af0f008b57 100644
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -1348,6 +1348,7 @@ static int transfer(struct dummy_hcd *dum_hcd, struct urb *urb,
 {
 	struct dummy		*dum = dum_hcd->dum;
 	struct dummy_request	*req;
+	int			sent = 0;
 
 top:
 	/* if there's no request queued, the device is NAKing; return */
@@ -1385,12 +1386,15 @@ top:
 			if (len == 0)
 				break;
 
-			/* use an extra pass for the final short packet */
-			if (len > ep->ep.maxpacket) {
-				rescan = 1;
-				len -= (len % ep->ep.maxpacket);
+			/* send multiple of maxpacket first, then remainder */
+			if (len >= ep->ep.maxpacket) {
+				is_short = 0;
+				if (len % ep->ep.maxpacket)
+					rescan = 1;
+				len -= len % ep->ep.maxpacket;
+			} else {
+				is_short = 1;
 			}
-			is_short = (len % ep->ep.maxpacket) != 0;
 
 			len = dummy_perform_transfer(urb, req, len);
 
@@ -1399,6 +1403,7 @@ top:
 				req->req.status = len;
 			} else {
 				limit -= len;
+				sent += len;
 				urb->actual_length += len;
 				req->req.actual += len;
 			}
@@ -1421,7 +1426,7 @@ top:
 					*status = -EOVERFLOW;
 				else
 					*status = 0;
-			} else if (!to_host) {
+			} else {
 				*status = 0;
 				if (host_len > dev_len)
 					req->req.status = -EOVERFLOW;
@@ -1429,15 +1434,24 @@ top:
 					req->req.status = 0;
 			}
 
-		/* many requests terminate without a short packet */
+		/*
+		 * many requests terminate without a short packet.
+		 * send a zlp if demanded by flags.
+		 */
 		} else {
-			if (req->req.length == req->req.actual
-					&& !req->req.zero)
-				req->req.status = 0;
-			if (urb->transfer_buffer_length == urb->actual_length
-					&& !(urb->transfer_flags
-						& URB_ZERO_PACKET))
-				*status = 0;
+			if (req->req.length == req->req.actual) {
+				if (req->req.zero && to_host)
+					rescan = 1;
+				else
+					req->req.status = 0;
+			}
+			if (urb->transfer_buffer_length == urb->actual_length) {
+				if (urb->transfer_flags & URB_ZERO_PACKET &&
+				    !to_host)
+					rescan = 1;
+				else
+					*status = 0;
+			}
 		}
 
 		/* device side completion --> continuable */
@@ -1460,7 +1474,7 @@ top:
 		if (rescan)
 			goto top;
 	}
-	return limit;
+	return sent;
 }
 
 static int periodic_bytes(struct dummy *dum, struct dummy_ep *ep)
@@ -1890,7 +1904,7 @@ restart:
 		default:
 treat_control_like_bulk:
 			ep->last_io = jiffies;
-			total = transfer(dum_hcd, urb, ep, limit, &status);
+			total -= transfer(dum_hcd, urb, ep, limit, &status);
 			break;
 		}
 
diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c
index 8aa2593c2c36..b9429bc42511 100644
--- a/drivers/usb/gadget/udc/gr_udc.c
+++ b/drivers/usb/gadget/udc/gr_udc.c
@@ -2117,8 +2117,7 @@ static int gr_remove(struct platform_device *pdev)
 		return -EBUSY;
 
 	gr_dfs_delete(dev);
-	if (dev->desc_pool)
-		dma_pool_destroy(dev->desc_pool);
+	dma_pool_destroy(dev->desc_pool);
 	platform_set_drvdata(pdev, NULL);
 
 	gr_free_request(&dev->epi[0].ep, &dev->ep0reqi->req);
diff --git a/drivers/usb/gadget/udc/mv_u3d_core.c b/drivers/usb/gadget/udc/mv_u3d_core.c
index 4c489692745e..dafe74eb9ade 100644
--- a/drivers/usb/gadget/udc/mv_u3d_core.c
+++ b/drivers/usb/gadget/udc/mv_u3d_core.c
@@ -1767,8 +1767,7 @@ static int mv_u3d_remove(struct platform_device *dev)
 	usb_del_gadget_udc(&u3d->gadget);
 
 	/* free memory allocated in probe */
-	if (u3d->trb_pool)
-		dma_pool_destroy(u3d->trb_pool);
+	dma_pool_destroy(u3d->trb_pool);
 
 	if (u3d->ep_context)
 		dma_free_coherent(&dev->dev, u3d->ep_context_size,
diff --git a/drivers/usb/gadget/udc/mv_udc_core.c b/drivers/usb/gadget/udc/mv_udc_core.c
index 339af51df57d..81b6229c7805 100644
--- a/drivers/usb/gadget/udc/mv_udc_core.c
+++ b/drivers/usb/gadget/udc/mv_udc_core.c
@@ -2100,8 +2100,7 @@ static int mv_udc_remove(struct platform_device *pdev)
 	}
 
 	/* free memory allocated in probe */
-	if (udc->dtd_pool)
-		dma_pool_destroy(udc->dtd_pool);
+	dma_pool_destroy(udc->dtd_pool);
 
 	if (udc->ep_dqh)
 		dma_free_coherent(&pdev->dev, udc->ep_dqh_size,
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 9a8c936cd42c..41f841fa6c4d 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1498,10 +1498,10 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 	 * use Event Data TRBs, and we don't chain in a link TRB on short
 	 * transfers, we're basically dividing by 1.
 	 *
-	 * xHCI 1.0 specification indicates that the Average TRB Length should
-	 * be set to 8 for control endpoints.
+	 * xHCI 1.0 and 1.1 specification indicates that the Average TRB Length
+	 * should be set to 8 for control endpoints.
 	 */
-	if (usb_endpoint_xfer_control(&ep->desc) && xhci->hci_version == 0x100)
+	if (usb_endpoint_xfer_control(&ep->desc) && xhci->hci_version >= 0x100)
 		ep_ctx->tx_info |= cpu_to_le32(AVG_TRB_LENGTH_FOR_EP(8));
 	else
 		ep_ctx->tx_info |=
@@ -1792,8 +1792,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	int size;
 	int i, j, num_ports;
 
-	if (timer_pending(&xhci->cmd_timer))
-		del_timer_sync(&xhci->cmd_timer);
+	del_timer_sync(&xhci->cmd_timer);
 
 	/* Free the Event Ring Segment Table and the actual Event Ring */
 	size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
@@ -2321,6 +2320,10 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 
 	INIT_LIST_HEAD(&xhci->cmd_list);
 
+	/* init command timeout timer */
+	setup_timer(&xhci->cmd_timer, xhci_handle_command_timeout,
+		    (unsigned long)xhci);
+
 	page_size = readl(&xhci->op_regs->page_size);
 	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
 			"Supported page size register = 0x%x", page_size);
@@ -2505,10 +2508,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 			"Wrote ERST address to ir_set 0.");
 	xhci_print_ir_set(xhci, 0);
 
-	/* init command timeout timer */
-	setup_timer(&xhci->cmd_timer, xhci_handle_command_timeout,
-		    (unsigned long)xhci);
-
 	/*
 	 * XXX: Might need to set the Interrupter Moderation Register to
 	 * something other than the default (~1ms minimum between interrupts).
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 5590eac2b22d..c79d33676672 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -180,51 +180,6 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 				"QUIRK: Resetting on resume");
 }
 
-/*
- * In some Intel xHCI controllers, in order to get D3 working,
- * through a vendor specific SSIC CONFIG register at offset 0x883c,
- * SSIC PORT need to be marked as "unused" before putting xHCI
- * into D3. After D3 exit, the SSIC port need to be marked as "used".
- * Without this change, xHCI might not enter D3 state.
- * Make sure PME works on some Intel xHCI controllers by writing 1 to clear
- * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
- */
-static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend)
-{
-	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
-	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
-	u32 val;
-	void __iomem *reg;
-
-	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
-		 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) {
-
-		reg = (void __iomem *) xhci->cap_regs + PORT2_SSIC_CONFIG_REG2;
-
-		/* Notify SSIC that SSIC profile programming is not done */
-		val = readl(reg) & ~PROG_DONE;
-		writel(val, reg);
-
-		/* Mark SSIC port as unused(suspend) or used(resume) */
-		val = readl(reg);
-		if (suspend)
-			val |= SSIC_PORT_UNUSED;
-		else
-			val &= ~SSIC_PORT_UNUSED;
-		writel(val, reg);
-
-		/* Notify SSIC that SSIC profile programming is done */
-		val = readl(reg) | PROG_DONE;
-		writel(val, reg);
-		readl(reg);
-	}
-
-	reg = (void __iomem *) xhci->cap_regs + 0x80a4;
-	val = readl(reg);
-	writel(val | BIT(28), reg);
-	readl(reg);
-}
-
 #ifdef CONFIG_ACPI
 static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev)
 {
@@ -345,6 +300,51 @@ static void xhci_pci_remove(struct pci_dev *dev)
 }
 
 #ifdef CONFIG_PM
+/*
+ * In some Intel xHCI controllers, in order to get D3 working,
+ * through a vendor specific SSIC CONFIG register at offset 0x883c,
+ * SSIC PORT need to be marked as "unused" before putting xHCI
+ * into D3. After D3 exit, the SSIC port need to be marked as "used".
+ * Without this change, xHCI might not enter D3 state.
+ * Make sure PME works on some Intel xHCI controllers by writing 1 to clear
+ * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
+ */
+static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
+	u32 val;
+	void __iomem *reg;
+
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+		 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) {
+
+		reg = (void __iomem *) xhci->cap_regs + PORT2_SSIC_CONFIG_REG2;
+
+		/* Notify SSIC that SSIC profile programming is not done */
+		val = readl(reg) & ~PROG_DONE;
+		writel(val, reg);
+
+		/* Mark SSIC port as unused(suspend) or used(resume) */
+		val = readl(reg);
+		if (suspend)
+			val |= SSIC_PORT_UNUSED;
+		else
+			val &= ~SSIC_PORT_UNUSED;
+		writel(val, reg);
+
+		/* Notify SSIC that SSIC profile programming is done */
+		val = readl(reg) | PROG_DONE;
+		writel(val, reg);
+		readl(reg);
+	}
+
+	reg = (void __iomem *) xhci->cap_regs + 0x80a4;
+	val = readl(reg);
+	writel(val | BIT(28), reg);
+	readl(reg);
+}
+
 static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 {
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index a47a1e897086..43291f93afeb 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -302,6 +302,15 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci)
 	ret = xhci_handshake(&xhci->op_regs->cmd_ring,
 			CMD_RING_RUNNING, 0, 5 * 1000 * 1000);
 	if (ret < 0) {
+		/* we are about to kill xhci, give it one more chance */
+		xhci_write_64(xhci, temp_64 | CMD_RING_ABORT,
+			      &xhci->op_regs->cmd_ring);
+		udelay(1000);
+		ret = xhci_handshake(&xhci->op_regs->cmd_ring,
+				     CMD_RING_RUNNING, 0, 3 * 1000 * 1000);
+		if (ret == 0)
+			return 0;
+
 		xhci_err(xhci, "Stopped the command ring failed, "
 				"maybe the host is dead\n");
 		xhci->xhc_state |= XHCI_STATE_DYING;
@@ -3461,8 +3470,8 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	if (start_cycle == 0)
 		field |= 0x1;
 
-	/* xHCI 1.0 6.4.1.2.1: Transfer Type field */
-	if (xhci->hci_version == 0x100) {
+	/* xHCI 1.0/1.1 6.4.1.2.1: Transfer Type field */
+	if (xhci->hci_version >= 0x100) {
 		if (urb->transfer_buffer_length > 0) {
 			if (setup->bRequestType & USB_DIR_IN)
 				field |= TRB_TX_TYPE(TRB_DATA_IN);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 6b0f4a47e402..9957bd96d4bc 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -146,7 +146,8 @@ static int xhci_start(struct xhci_hcd *xhci)
 				"waited %u microseconds.\n",
 				XHCI_MAX_HALT_USEC);
 	if (!ret)
-		xhci->xhc_state &= ~XHCI_STATE_HALTED;
+		xhci->xhc_state &= ~(XHCI_STATE_HALTED | XHCI_STATE_DYING);
+
 	return ret;
 }
 
@@ -654,15 +655,6 @@ int xhci_run(struct usb_hcd *hcd)
 }
 EXPORT_SYMBOL_GPL(xhci_run);
 
-static void xhci_only_stop_hcd(struct usb_hcd *hcd)
-{
-	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
-
-	spin_lock_irq(&xhci->lock);
-	xhci_halt(xhci);
-	spin_unlock_irq(&xhci->lock);
-}
-
 /*
  * Stop xHCI driver.
  *
@@ -677,12 +669,14 @@ void xhci_stop(struct usb_hcd *hcd)
 	u32 temp;
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 
-	if (!usb_hcd_is_primary_hcd(hcd)) {
-		xhci_only_stop_hcd(xhci->shared_hcd);
+	if (xhci->xhc_state & XHCI_STATE_HALTED)
 		return;
-	}
 
+	mutex_lock(&xhci->mutex);
 	spin_lock_irq(&xhci->lock);
+	xhci->xhc_state |= XHCI_STATE_HALTED;
+	xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
+
 	/* Make sure the xHC is halted for a USB3 roothub
 	 * (xhci_stop() could be called as part of failed init).
 	 */
@@ -717,6 +711,7 @@ void xhci_stop(struct usb_hcd *hcd)
 	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
 			"xhci_stop completed - status = %x",
 			readl(&xhci->op_regs->status));
+	mutex_unlock(&xhci->mutex);
 }
 
 /*
@@ -3793,6 +3788,9 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
 
 	mutex_lock(&xhci->mutex);
 
+	if (xhci->xhc_state)	/* dying or halted */
+		goto out;
+
 	if (!udev->slot_id) {
 		xhci_dbg_trace(xhci, trace_xhci_dbg_address,
 				"Bad Slot ID %d", udev->slot_id);
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 514a6cdaeff6..4a518ff12310 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1051,6 +1051,7 @@ void musb_start(struct musb *musb)
 	 * (c) peripheral initiates, using SRP
 	 */
 	if (musb->port_mode != MUSB_PORT_MODE_HOST &&
+			musb->xceiv->otg->state != OTG_STATE_A_WAIT_BCON &&
 			(devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) {
 		musb->is_active = 1;
 	} else {
@@ -2448,6 +2449,9 @@ static int musb_suspend(struct device *dev)
 	struct musb	*musb = dev_to_musb(dev);
 	unsigned long	flags;
 
+	musb_platform_disable(musb);
+	musb_generic_disable(musb);
+
 	spin_lock_irqsave(&musb->lock, flags);
 
 	if (is_peripheral_active(musb)) {
@@ -2501,6 +2505,9 @@ static int musb_resume(struct device *dev)
 	pm_runtime_disable(dev);
 	pm_runtime_set_active(dev);
 	pm_runtime_enable(dev);
+
+	musb_start(musb);
+
 	return 0;
 }
 
diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
index d07cafb7d5f5..e499b862a946 100644
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -551,6 +551,9 @@ static int cppi41_dma_channel_abort(struct dma_channel *channel)
 	} else {
 		cppi41_set_autoreq_mode(cppi41_channel, EP_MODE_AUTOREQ_NONE);
 
+		/* delay to drain to cppi dma pipeline for isoch */
+		udelay(250);
+
 		csr = musb_readw(epio, MUSB_RXCSR);
 		csr &= ~(MUSB_RXCSR_H_REQPKT | MUSB_RXCSR_DMAENAB);
 		musb_writew(epio, MUSB_RXCSR, csr);
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index a0cfead6150f..84512d1d5eee 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -225,8 +225,11 @@ static void dsps_musb_enable(struct musb *musb)
 
 	dsps_writel(reg_base, wrp->epintr_set, epmask);
 	dsps_writel(reg_base, wrp->coreintr_set, coremask);
-	/* start polling for ID change. */
-	mod_timer(&glue->timer, jiffies + msecs_to_jiffies(wrp->poll_timeout));
+	/* start polling for ID change in dual-role idle mode */
+	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
+			musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
+		mod_timer(&glue->timer, jiffies +
+				msecs_to_jiffies(wrp->poll_timeout));
 	dsps_musb_try_idle(musb, 0);
 }
 
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index 39168fe9b406..b2685e75a683 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -379,6 +379,8 @@ static const struct of_device_id ux500_match[] = {
         {}
 };
 
+MODULE_DEVICE_TABLE(of, ux500_match);
+
 static struct platform_driver ux500_driver = {
 	.probe		= ux500_probe,
 	.remove		= ux500_remove,
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 7d3beee2a587..173132416170 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -155,7 +155,7 @@ config USB_MSM_OTG
 config USB_QCOM_8X16_PHY
 	tristate "Qualcomm APQ8016/MSM8916 on-chip USB PHY controller support"
 	depends on ARCH_QCOM || COMPILE_TEST
-	depends on RESET_CONTROLLER
+	depends on RESET_CONTROLLER && EXTCON
 	select USB_PHY
 	select USB_ULPI_VIEWPORT
 	help
diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index ec6ecd03269c..5320cb8642cb 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -232,7 +232,8 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
 		clk_rate = pdata->clk_rate;
 		needs_vcc = pdata->needs_vcc;
 		if (gpio_is_valid(pdata->gpio_reset)) {
-			err = devm_gpio_request_one(dev, pdata->gpio_reset, 0,
+			err = devm_gpio_request_one(dev, pdata->gpio_reset,
+						    GPIOF_ACTIVE_LOW,
 						    dev_name(dev));
 			if (!err)
 				nop->gpiod_reset =
diff --git a/drivers/usb/phy/phy-isp1301.c b/drivers/usb/phy/phy-isp1301.c
index 8a55b37d1a02..db68156568e6 100644
--- a/drivers/usb/phy/phy-isp1301.c
+++ b/drivers/usb/phy/phy-isp1301.c
@@ -31,6 +31,7 @@ static const struct i2c_device_id isp1301_id[] = {
 	{ "isp1301", 0 },
 	{ }
 };
+MODULE_DEVICE_TABLE(i2c, isp1301_id);
 
 static struct i2c_client *isp1301_i2c_client;
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 6d1941a2396a..6956c4f62216 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -278,6 +278,10 @@ static void option_instat_callback(struct urb *urb);
 #define ZTE_PRODUCT_MF622			0x0001
 #define ZTE_PRODUCT_MF628			0x0015
 #define ZTE_PRODUCT_MF626			0x0031
+#define ZTE_PRODUCT_ZM8620_X			0x0396
+#define ZTE_PRODUCT_ME3620_MBIM			0x0426
+#define ZTE_PRODUCT_ME3620_X			0x1432
+#define ZTE_PRODUCT_ME3620_L			0x1433
 #define ZTE_PRODUCT_AC2726			0xfff1
 #define ZTE_PRODUCT_MG880			0xfffd
 #define ZTE_PRODUCT_CDMA_TECH			0xfffe
@@ -544,6 +548,18 @@ static const struct option_blacklist_info zte_mc2716_z_blacklist = {
 	.sendsetup = BIT(1) | BIT(2) | BIT(3),
 };
 
+static const struct option_blacklist_info zte_me3620_mbim_blacklist = {
+	.reserved = BIT(2) | BIT(3) | BIT(4),
+};
+
+static const struct option_blacklist_info zte_me3620_xl_blacklist = {
+	.reserved = BIT(3) | BIT(4) | BIT(5),
+};
+
+static const struct option_blacklist_info zte_zm8620_x_blacklist = {
+	.reserved = BIT(3) | BIT(4) | BIT(5),
+};
+
 static const struct option_blacklist_info huawei_cdc12_blacklist = {
 	.reserved = BIT(1) | BIT(2),
 };
@@ -1591,6 +1607,14 @@ static const struct usb_device_id option_ids[] = {
 	 .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
 	 .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
+	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_L),
+	 .driver_info = (kernel_ulong_t)&zte_me3620_xl_blacklist },
+	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_MBIM),
+	 .driver_info = (kernel_ulong_t)&zte_me3620_mbim_blacklist },
+	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_X),
+	 .driver_info = (kernel_ulong_t)&zte_me3620_xl_blacklist },
+	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ZM8620_X),
+	 .driver_info = (kernel_ulong_t)&zte_zm8620_x_blacklist },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) },
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 6c3734d2b45a..d3ea90bef84d 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -80,6 +80,8 @@ static int  whiteheat_firmware_download(struct usb_serial *serial,
 static int  whiteheat_firmware_attach(struct usb_serial *serial);
 
 /* function prototypes for the Connect Tech WhiteHEAT serial converter */
+static int whiteheat_probe(struct usb_serial *serial,
+				const struct usb_device_id *id);
 static int  whiteheat_attach(struct usb_serial *serial);
 static void whiteheat_release(struct usb_serial *serial);
 static int  whiteheat_port_probe(struct usb_serial_port *port);
@@ -116,6 +118,7 @@ static struct usb_serial_driver whiteheat_device = {
 	.description =		"Connect Tech - WhiteHEAT",
 	.id_table =		id_table_std,
 	.num_ports =		4,
+	.probe =		whiteheat_probe,
 	.attach =		whiteheat_attach,
 	.release =		whiteheat_release,
 	.port_probe =		whiteheat_port_probe,
@@ -217,6 +220,34 @@ static int whiteheat_firmware_attach(struct usb_serial *serial)
 /*****************************************************************************
  * Connect Tech's White Heat serial driver functions
  *****************************************************************************/
+
+static int whiteheat_probe(struct usb_serial *serial,
+				const struct usb_device_id *id)
+{
+	struct usb_host_interface *iface_desc;
+	struct usb_endpoint_descriptor *endpoint;
+	size_t num_bulk_in = 0;
+	size_t num_bulk_out = 0;
+	size_t min_num_bulk;
+	unsigned int i;
+
+	iface_desc = serial->interface->cur_altsetting;
+
+	for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
+		endpoint = &iface_desc->endpoint[i].desc;
+		if (usb_endpoint_is_bulk_in(endpoint))
+			++num_bulk_in;
+		if (usb_endpoint_is_bulk_out(endpoint))
+			++num_bulk_out;
+	}
+
+	min_num_bulk = COMMAND_PORT + 1;
+	if (num_bulk_in < min_num_bulk || num_bulk_out < min_num_bulk)
+		return -ENODEV;
+
+	return 0;
+}
+
 static int whiteheat_attach(struct usb_serial *serial)
 {
 	struct usb_serial_port *command_port;