Merge tag 'thermal-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull thermal control updates from Rafael Wysocki:
 "These start a rework of the handling of trip points in the thermal
  core, improve the cpufreq/devfreq cooling device handling, update some
  thermal control drivers and the tmon utility and clean up code.

  Specifics:

   - Consolidate the thermal core code by beginning to move the thermal
     trip structure from the thermal OF code as a generic structure to
     be used by the different sensors when registering a thermal zone
     (Daniel Lezcano).

   - Make per cpufreq / devfreq cooling device ops instead of using a
     global variable, fix comments and rework the trace information
     (Lukasz Luba).

   - Add the include/dt-bindings/thermal.h under the area covered by the
     thermal maintainer in the MAINTAINERS file (Lukas Bulwahn).

   - Improve the error output by giving the sensor identification when a
     thermal zone failed to initialize, the DT bindings by changing the
     positive logic and adding the r8a779f0 support on the rcar3
     (Wolfram Sang).

   - Convert the QCom tsens DT binding to the dtsformat format
     (Krzysztof Kozlowski).

   - Remove the pointless get_trend() function in the QCom, Ux500 and
     tegra thermal drivers, along with the unused DROP_FULL and
     RAISE_FULL trends definitions. Simplify the code by using clamp()
     macros (Daniel Lezcano).

   - Fix ref_table memory leak at probe time on the k3_j72xx bandgap
     (Bryan Brattlof).

   - Fix array underflow in prep_lookup_table (Dan Carpenter).

   - Add static annotation to the k3_j72xx_bandgap_j7* data structure
     (Jin Xiaoyun).

   - Fix typos in comments detected on sun8i by Coccinelle (Julia
     Lawall).

   - Fix typos in comments on rzg2l (Biju Das).

   - Remove as unnecessary call to dev_err() as the error is already
     printed by the failing function on u8500 (Yang Li).

   - Register the thermal zones as hwmon sensors for the Qcom thermal
     sensors (Dmitry Baryshkov).

   - Fix 'tmon' tool compilation issue by adding phtread.h include
     (Markus Mayer).

   - Fix typo in the comments for the 'tmon' tool (Slark Xiao).

   - Make the thermal core use ida_alloc()/free() directly instead of
     ida_simple_get()/ida_simple_remove() that have been deprecated
     (keliu).

   - Drop ACPI_FADT_LOW_POWER_S0 check from the Intel PCH thermal
     control driver (Rafael Wysocki)"

* tag 'thermal-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (39 commits)
  thermal/of: Initialize trip points separately
  thermal/of: Use thermal trips stored in the thermal zone
  thermal/core: Add thermal_trip in thermal_zone
  thermal/core: Rename 'trips' to 'num_trips'
  thermal/core: Move thermal_set_delay_jiffies to static
  thermal/core: Remove unneeded EXPORT_SYMBOLS
  thermal/of: Move thermal_trip structure to thermal.h
  thermal/of: Remove the device node pointer for thermal_trip
  thermal/of: Replace device node match with device node search
  thermal/core: Remove duplicate information when an error occurs
  thermal/core: Avoid calling ->get_trip_temp() unnecessarily
  thermal/tools/tmon: Fix typo 'the the' in comment
  thermal/tools/tmon: Include pthread and time headers in tmon.h
  thermal/ti-soc-thermal: Fix comment typo
  thermal/drivers/qcom/spmi-adc-tm5: Register thermal zones as hwmon sensors
  thermal/drivers/qcom/temp-alarm: Register thermal zones as hwmon sensors
  thermal/drivers/u8500: Remove unnecessary print function dev_err()
  thermal/drivers/rzg2l: Fix comments
  thermal/drivers/sun8i: Fix typo in comment
  thermal/drivers/k3_j72xx_bandgap: Make k3_j72xx_bandgap_j721e_data and k3_j72xx_bandgap_j7200_data static
  ...

33 files changed, 397 insertions, 448 deletions

diff --git a/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml b/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml
new file mode 100644
index 000000000000..5f08b6e59b8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/qcom,spmi-temp-alarm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QPNP PMIC Temperature Alarm
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  QPNP temperature alarm peripherals are found inside of Qualcomm PMIC chips
+  that utilize the Qualcomm SPMI implementation. These peripherals provide an
+  interrupt signal and status register to identify high PMIC die temperature.
+
+allOf:
+  - $ref: thermal-sensor.yaml#
+
+properties:
+  compatible:
+    const: qcom,spmi-temp-alarm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  io-channels:
+    items:
+      - description: ADC channel, which reports chip die temperature
+
+  io-channel-names:
+    items:
+      - const: thermal
+
+  '#thermal-sensor-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pm8350_temp_alarm: temperature-sensor@a00 {
+            compatible = "qcom,spmi-temp-alarm";
+            reg = <0xa00>;
+            interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+            #thermal-sensor-cells = <0>;
+        };
+    };
+
+    thermal-zones {
+        pm8350_thermal: pm8350c-thermal {
+            polling-delay-passive = <100>;
+            polling-delay = <0>;
+            thermal-sensors = <&pm8350_temp_alarm>;
+
+            trips {
+                pm8350_trip0: trip0 {
+                    temperature = <95000>;
+                    hysteresis = <0>;
+                    type = "passive";
+                };
+
+                pm8350_crit: pm8350c-crit {
+                    temperature = <115000>;
+                    hysteresis = <0>;
+                    type = "critical";
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt b/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt
deleted file mode 100644
index 2d5b2ad03314..000000000000
--- a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-Qualcomm QPNP PMIC Temperature Alarm
-
-QPNP temperature alarm peripherals are found inside of Qualcomm PMIC chips
-that utilize the Qualcomm SPMI implementation. These peripherals provide an
-interrupt signal and status register to identify high PMIC die temperature.
-
-Required properties:
-- compatible:      Should contain "qcom,spmi-temp-alarm".
-- reg:             Specifies the SPMI address.
-- interrupts:      PMIC temperature alarm interrupt.
-- #thermal-sensor-cells: Should be 0. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description.
-
-Optional properties:
-- io-channels:     Should contain IIO channel specifier for the ADC channel,
-                   which report chip die temperature.
-- io-channel-names: Should contain "thermal".
-
-Example:
-
-	pm8941_temp: thermal-alarm@2400 {
-		compatible = "qcom,spmi-temp-alarm";
-		reg = <0x2400>;
-		interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
-		#thermal-sensor-cells = <0>;
-
-		io-channels = <&pm8941_vadc VADC_DIE_TEMP>;
-		io-channel-names = "thermal";
-	};
-
-	thermal-zones {
-		pm8941 {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&pm8941_temp>;
-
-			trips {
-				stage1 {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				stage2 {
-					temperature = <125000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-	};
-
diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
index 1368d90da0e8..0f05f5c886c5 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
@@ -8,9 +8,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Renesas R-Car Gen3 Thermal Sensor
 
 description:
-  On R-Car Gen3 SoCs, the thermal sensor controllers (TSC) control the thermal
-  sensors (THS) which are the analog circuits for measuring temperature (Tj)
-  inside the LSI.
+  On most R-Car Gen3 and later SoCs, the thermal sensor controllers (TSC)
+  control the thermal sensors (THS) which are the analog circuits for
+  measuring temperature (Tj) inside the LSI.
 
 maintainers:
   - Niklas Söderlund <niklas.soderlund@ragnatech.se>
@@ -27,6 +27,7 @@ properties:
       - renesas,r8a77965-thermal # R-Car M3-N
       - renesas,r8a77980-thermal # R-Car V3H
       - renesas,r8a779a0-thermal # R-Car V3U
+      - renesas,r8a779f0-thermal # R-Car S4-8
 
   reg: true
 
@@ -57,31 +58,38 @@ required:
   - "#thermal-sensor-cells"
 
 if:
-  not:
-    properties:
-      compatible:
-        contains:
-          enum:
-            - renesas,r8a779a0-thermal
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,r8a779a0-thermal
 then:
   properties:
     reg:
-      minItems: 2
       items:
+        - description: TSC0 registers
         - description: TSC1 registers
         - description: TSC2 registers
         - description: TSC3 registers
-  required:
-    - interrupts
+        - description: TSC4 registers
 else:
   properties:
     reg:
+      minItems: 2
       items:
-        - description: TSC0 registers
         - description: TSC1 registers
         - description: TSC2 registers
         - description: TSC3 registers
-        - description: TSC4 registers
+  if:
+    not:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,r8a779f0-thermal
+  then:
+    required:
+      - interrupts
 
 additionalProperties: false
 
diff --git a/MAINTAINERS b/MAINTAINERS
index c096da63ea63..d0e31f59c314 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19949,6 +19949,7 @@ F:	Documentation/ABI/testing/sysfs-class-thermal
 F:	Documentation/devicetree/bindings/thermal/
 F:	Documentation/driver-api/thermal/
 F:	drivers/thermal/
+F:	include/dt-bindings/thermal/
 F:	include/linux/cpu_cooling.h
 F:	include/linux/thermal.h
 F:	include/uapi/linux/thermal.h
diff --git a/drivers/thermal/cpufreq_cooling.c b/drivers/thermal/cpufreq_cooling.c
index cb75f1365615..b76293cc989c 100644
--- a/drivers/thermal/cpufreq_cooling.c
+++ b/drivers/thermal/cpufreq_cooling.c
@@ -60,6 +60,7 @@ struct time_in_idle {
  * @cdev: thermal_cooling_device pointer to keep track of the
  *	registered cooling device.
  * @policy: cpufreq policy.
+ * @cooling_ops: cpufreq callbacks to thermal cooling device ops
  * @idle_time: idle time stats
  * @qos_req: PM QoS contraint to apply
  *
@@ -72,6 +73,7 @@ struct cpufreq_cooling_device {
 	unsigned int max_level;
 	struct em_perf_domain *em;
 	struct cpufreq_policy *policy;
+	struct thermal_cooling_device_ops cooling_ops;
 #ifndef CONFIG_SMP
 	struct time_in_idle *idle_time;
 #endif
@@ -211,7 +213,7 @@ static u32 get_dynamic_power(struct cpufreq_cooling_device *cpufreq_cdev,
  * complex code may be needed if experiments show that it's not
  * accurate enough.
  *
- * Return: 0 on success, -E* if getting the static power failed.
+ * Return: 0 on success, this function doesn't fail.
  */
 static int cpufreq_get_requested_power(struct thermal_cooling_device *cdev,
 				       u32 *power)
@@ -221,16 +223,9 @@ static int cpufreq_get_requested_power(struct thermal_cooling_device *cdev,
 	u32 total_load = 0;
 	struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
 	struct cpufreq_policy *policy = cpufreq_cdev->policy;
-	u32 *load_cpu = NULL;
 
 	freq = cpufreq_quick_get(policy->cpu);
 
-	if (trace_thermal_power_cpu_get_power_enabled()) {
-		u32 ncpus = cpumask_weight(policy->related_cpus);
-
-		load_cpu = kcalloc(ncpus, sizeof(*load_cpu), GFP_KERNEL);
-	}
-
 	for_each_cpu(cpu, policy->related_cpus) {
 		u32 load;
 
@@ -240,22 +235,13 @@ static int cpufreq_get_requested_power(struct thermal_cooling_device *cdev,
 			load = 0;
 
 		total_load += load;
-		if (load_cpu)
-			load_cpu[i] = load;
-
-		i++;
 	}
 
 	cpufreq_cdev->last_load = total_load;
 
 	*power = get_dynamic_power(cpufreq_cdev, freq);
 
-	if (load_cpu) {
-		trace_thermal_power_cpu_get_power(policy->related_cpus, freq,
-						  load_cpu, i, *power);
-
-		kfree(load_cpu);
-	}
+	trace_thermal_power_cpu_get_power_simple(policy->cpu, *power);
 
 	return 0;
 }
@@ -270,9 +256,8 @@ static int cpufreq_get_requested_power(struct thermal_cooling_device *cdev,
  * milliwatts assuming 100% load.  Store the calculated power in
  * @power.
  *
- * Return: 0 on success, -EINVAL if the cooling device state could not
- * be converted into a frequency or other -E* if there was an error
- * when calculating the static power.
+ * Return: 0 on success, -EINVAL if the cooling device state is bigger
+ * than maximum allowed.
  */
 static int cpufreq_state2power(struct thermal_cooling_device *cdev,
 			       unsigned long state, u32 *power)
@@ -302,15 +287,11 @@ static int cpufreq_state2power(struct thermal_cooling_device *cdev,
  * Calculate a cooling device state for the cpus described by @cdev
  * that would allow them to consume at most @power mW and store it in
  * @state.  Note that this calculation depends on external factors
- * such as the cpu load or the current static power.  Calling this
- * function with the same power as input can yield different cooling
- * device states depending on those external factors.
- *
- * Return: 0 on success, -ENODEV if no cpus are online or -EINVAL if
- * the calculated frequency could not be converted to a valid state.
- * The latter should not happen unless the frequencies available to
- * cpufreq have changed since the initialization of the cpu cooling
- * device.
+ * such as the CPUs load.  Calling this function with the same power
+ * as input can yield different cooling device states depending on those
+ * external factors.
+ *
+ * Return: 0 on success, this function doesn't fail.
  */
 static int cpufreq_power2state(struct thermal_cooling_device *cdev,
 			       u32 power, unsigned long *state)
@@ -422,7 +403,7 @@ static unsigned int get_state_freq(struct cpufreq_cooling_device *cpufreq_cdev,
  * Callback for the thermal cooling device to return the cpufreq
  * max cooling state.
  *
- * Return: 0 on success, an error code otherwise.
+ * Return: 0 on success, this function doesn't fail.
  */
 static int cpufreq_get_max_state(struct thermal_cooling_device *cdev,
 				 unsigned long *state)
@@ -441,7 +422,7 @@ static int cpufreq_get_max_state(struct thermal_cooling_device *cdev,
  * Callback for the thermal cooling device to return the cpufreq
  * current cooling state.
  *
- * Return: 0 on success, an error code otherwise.
+ * Return: 0 on success, this function doesn't fail.
  */
 static int cpufreq_get_cur_state(struct thermal_cooling_device *cdev,
 				 unsigned long *state)
@@ -492,14 +473,6 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev,
 	return ret;
 }
 
-/* Bind cpufreq callbacks to thermal cooling device ops */
-
-static struct thermal_cooling_device_ops cpufreq_cooling_ops = {
-	.get_max_state		= cpufreq_get_max_state,
-	.get_cur_state		= cpufreq_get_cur_state,
-	.set_cur_state		= cpufreq_set_cur_state,
-};
-
 /**
  * __cpufreq_cooling_register - helper function to create cpufreq cooling device
  * @np: a valid struct device_node to the cooling device device tree node
@@ -508,7 +481,7 @@ static struct thermal_cooling_device_ops cpufreq_cooling_ops = {
  * @em: Energy Model of the cpufreq policy
  *
  * This interface function registers the cpufreq cooling device with the name
- * "thermal-cpufreq-%x". This api can support multiple instances of cpufreq
+ * "cpufreq-%s". This API can support multiple instances of cpufreq
  * cooling devices. It also gives the opportunity to link the cooling device
  * with a device tree node, in order to bind it via the thermal DT code.
  *
@@ -561,7 +534,10 @@ __cpufreq_cooling_register(struct device_node *np,
 	/* max_level is an index, not a counter */
 	cpufreq_cdev->max_level = i - 1;
 
-	cooling_ops = &cpufreq_cooling_ops;
+	cooling_ops = &cpufreq_cdev->cooling_ops;
+	cooling_ops->get_max_state = cpufreq_get_max_state;
+	cooling_ops->get_cur_state = cpufreq_get_cur_state;
+	cooling_ops->set_cur_state = cpufreq_set_cur_state;
 
 #ifdef CONFIG_THERMAL_GOV_POWER_ALLOCATOR
 	if (em_is_sane(cpufreq_cdev, em)) {
@@ -616,8 +592,8 @@ free_cdev:
  * @policy: cpufreq policy
  *
  * This interface function registers the cpufreq cooling device with the name
- * "thermal-cpufreq-%x". This api can support multiple instances of cpufreq
- * cooling devices.
+ * "cpufreq-%s". This API can support multiple instances of cpufreq cooling
+ * devices.
  *
  * Return: a valid struct thermal_cooling_device pointer on success,
  * on failure, it returns a corresponding ERR_PTR().
@@ -634,17 +610,14 @@ EXPORT_SYMBOL_GPL(cpufreq_cooling_register);
  * @policy: cpufreq policy
  *
  * This interface function registers the cpufreq cooling device with the name
- * "thermal-cpufreq-%x". This api can support multiple instances of cpufreq
- * cooling devices. Using this API, the cpufreq cooling device will be
- * linked to the device tree node provided.
+ * "cpufreq-%s". This API can support multiple instances of cpufreq cooling
+ * devices. Using this API, the cpufreq cooling device will be linked to the
+ * device tree node provided.
  *
  * Using this function, the cooling device will implement the power
- * extensions by using a simple cpu power model.  The cpus must have
+ * extensions by using the Energy Model (if present).  The cpus must have
  * registered their OPPs using the OPP library.
  *
- * It also takes into account, if property present in policy CPU node, the
- * static power consumed by the cpu.
- *
  * Return: a valid struct thermal_cooling_device pointer on success,
  * and NULL on failure.
  */
@@ -680,7 +653,7 @@ EXPORT_SYMBOL_GPL(of_cpufreq_cooling_register);
  * cpufreq_cooling_unregister - function to remove cpufreq cooling device.
  * @cdev: thermal cooling device pointer.
  *
- * This interface function unregisters the "thermal-cpufreq-%x" cooling device.
+ * This interface function unregisters the "cpufreq-%x" cooling device.
  */
 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
 {
diff --git a/drivers/thermal/db8500_thermal.c b/drivers/thermal/db8500_thermal.c
index 21d4d6e6409a..121cf853e545 100644
--- a/drivers/thermal/db8500_thermal.c
+++ b/drivers/thermal/db8500_thermal.c
@@ -53,7 +53,6 @@ static const unsigned long db8500_thermal_points[] = {
 
 struct db8500_thermal_zone {
 	struct thermal_zone_device *tz;
-	enum thermal_trend trend;
 	unsigned long interpolated_temp;
 	unsigned int cur_index;
 };
@@ -73,24 +72,12 @@ static int db8500_thermal_get_temp(void *data, int *temp)
 	return 0;
 }
 
-/* Callback to get temperature changing trend */
-static int db8500_thermal_get_trend(void *data, int trip, enum thermal_trend *trend)
-{
-	struct db8500_thermal_zone *th = data;
-
-	*trend = th->trend;
-
-	return 0;
-}
-
 static struct thermal_zone_of_device_ops thdev_ops = {
 	.get_temp = db8500_thermal_get_temp,
-	.get_trend = db8500_thermal_get_trend,
 };
 
 static void db8500_thermal_update_config(struct db8500_thermal_zone *th,
 					 unsigned int idx,
-					 enum thermal_trend trend,
 					 unsigned long next_low,
 					 unsigned long next_high)
 {
@@ -98,7 +85,6 @@ static void db8500_thermal_update_config(struct db8500_thermal_zone *th,
 
 	th->cur_index = idx;
 	th->interpolated_temp = (next_low + next_high)/2;
-	th->trend = trend;
 
 	/*
 	 * The PRCMU accept absolute temperatures in celsius so divide
@@ -127,8 +113,7 @@ static irqreturn_t prcmu_low_irq_handler(int irq, void *irq_data)
 	}
 	idx -= 1;
 
-	db8500_thermal_update_config(th, idx, THERMAL_TREND_DROPPING,
-				     next_low, next_high);
+	db8500_thermal_update_config(th, idx, next_low, next_high);
 	dev_dbg(&th->tz->device,
 		"PRCMU set max %ld, min %ld\n", next_high, next_low);
 
@@ -149,8 +134,7 @@ static irqreturn_t prcmu_high_irq_handler(int irq, void *irq_data)
 		next_low = db8500_thermal_points[idx];
 		idx += 1;
 
-		db8500_thermal_update_config(th, idx, THERMAL_TREND_RAISING,
-					     next_low, next_high);
+		db8500_thermal_update_config(th, idx, next_low, next_high);
 
 		dev_dbg(&th->tz->device,
 			"PRCMU set max %ld, min %ld\n", next_high, next_low);
@@ -174,10 +158,8 @@ static int db8500_thermal_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	low_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_LOW");
-	if (low_irq < 0) {
-		dev_err(dev, "Get IRQ_HOTMON_LOW failed\n");
+	if (low_irq < 0)
 		return low_irq;
-	}
 
 	ret = devm_request_threaded_irq(dev, low_irq, NULL,
 		prcmu_low_irq_handler, IRQF_NO_SUSPEND | IRQF_ONESHOT,
@@ -188,10 +170,8 @@ static int db8500_thermal_probe(struct platform_device *pdev)
 	}
 
 	high_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_HIGH");
-	if (high_irq < 0) {
-		dev_err(dev, "Get IRQ_HOTMON_HIGH failed\n");
+	if (high_irq < 0)
 		return high_irq;
-	}
 
 	ret = devm_request_threaded_irq(dev, high_irq, NULL,
 		prcmu_high_irq_handler, IRQF_NO_SUSPEND | IRQF_ONESHOT,
@@ -210,8 +190,7 @@ static int db8500_thermal_probe(struct platform_device *pdev)
 	dev_info(dev, "thermal zone sensor registered\n");
 
 	/* Start measuring at the lowest point */
-	db8500_thermal_update_config(th, 0, THERMAL_TREND_STABLE,
-				     PRCMU_DEFAULT_LOW_TEMP,
+	db8500_thermal_update_config(th, 0, PRCMU_DEFAULT_LOW_TEMP,
 				     db8500_thermal_points[0]);
 
 	platform_set_drvdata(pdev, th);
@@ -232,8 +211,7 @@ static int db8500_thermal_resume(struct platform_device *pdev)
 	struct db8500_thermal_zone *th = platform_get_drvdata(pdev);
 
 	/* Resume and start measuring at the lowest point */
-	db8500_thermal_update_config(th, 0, THERMAL_TREND_STABLE,
-				     PRCMU_DEFAULT_LOW_TEMP,
+	db8500_thermal_update_config(th, 0, PRCMU_DEFAULT_LOW_TEMP,
 				     db8500_thermal_points[0]);
 
 	return 0;
diff --git a/drivers/thermal/devfreq_cooling.c b/drivers/thermal/devfreq_cooling.c
index 8d1260f65061..24b474925cd6 100644
--- a/drivers/thermal/devfreq_cooling.c
+++ b/drivers/thermal/devfreq_cooling.c
@@ -28,6 +28,7 @@
  * struct devfreq_cooling_device - Devfreq cooling device
  *		devfreq_cooling_device registered.
  * @cdev:	Pointer to associated thermal cooling device.
+ * @cooling_ops: devfreq callbacks to thermal cooling device ops
  * @devfreq:	Pointer to associated devfreq device.
  * @cooling_state:	Current cooling state.
  * @freq_table:	Pointer to a table with the frequencies sorted in descending
@@ -48,6 +49,7 @@
  */
 struct devfreq_cooling_device {
 	struct thermal_cooling_device *cdev;
+	struct thermal_cooling_device_ops cooling_ops;
 	struct devfreq *devfreq;
 	unsigned long cooling_state;
 	u32 *freq_table;
@@ -301,12 +303,6 @@ static int devfreq_cooling_power2state(struct thermal_cooling_device *cdev,
 	return 0;
 }
 
-static struct thermal_cooling_device_ops devfreq_cooling_ops = {
-	.get_max_state = devfreq_cooling_get_max_state,
-	.get_cur_state = devfreq_cooling_get_cur_state,
-	.set_cur_state = devfreq_cooling_set_cur_state,
-};
-
 /**
  * devfreq_cooling_gen_tables() - Generate frequency table.
  * @dfc:	Pointer to devfreq cooling device.
@@ -374,18 +370,18 @@ of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df,
 	char *name;
 	int err, num_opps;
 
-	ops = kmemdup(&devfreq_cooling_ops, sizeof(*ops), GFP_KERNEL);
-	if (!ops)
-		return ERR_PTR(-ENOMEM);
 
 	dfc = kzalloc(sizeof(*dfc), GFP_KERNEL);
-	if (!dfc) {
-		err = -ENOMEM;
-		goto free_ops;
-	}
+	if (!dfc)
+		return ERR_PTR(-ENOMEM);
 
 	dfc->devfreq = df;
 
+	ops = &dfc->cooling_ops;
+	ops->get_max_state = devfreq_cooling_get_max_state;
+	ops->get_cur_state = devfreq_cooling_get_cur_state;
+	ops->set_cur_state = devfreq_cooling_set_cur_state;
+
 	em = em_pd_get(dev);
 	if (em && !em_is_artificial(em)) {
 		dfc->em_pd = em;
@@ -448,8 +444,6 @@ free_table:
 	kfree(dfc->freq_table);
 free_dfc:
 	kfree(dfc);
-free_ops:
-	kfree(ops);
 
 	return ERR_PTR(err);
 }
@@ -531,13 +525,11 @@ EXPORT_SYMBOL_GPL(devfreq_cooling_em_register);
 void devfreq_cooling_unregister(struct thermal_cooling_device *cdev)
 {
 	struct devfreq_cooling_device *dfc;
-	const struct thermal_cooling_device_ops *ops;
 	struct device *dev;
 
 	if (IS_ERR_OR_NULL(cdev))
 		return;
 
-	ops = cdev->ops;
 	dfc = cdev->devdata;
 	dev = dfc->devfreq->dev.parent;
 
@@ -548,6 +540,5 @@ void devfreq_cooling_unregister(struct thermal_cooling_device *cdev)
 
 	kfree(dfc->freq_table);
 	kfree(dfc);
-	kfree(ops);
 }
 EXPORT_SYMBOL_GPL(devfreq_cooling_unregister);
diff --git a/drivers/thermal/gov_fair_share.c b/drivers/thermal/gov_fair_share.c
index 1e5abf4822be..6a2abcfc648f 100644
--- a/drivers/thermal/gov_fair_share.c
+++ b/drivers/thermal/gov_fair_share.c
@@ -25,10 +25,10 @@ static int get_trip_level(struct thermal_zone_device *tz)
 	int trip_temp;
 	enum thermal_trip_type trip_type;
 
-	if (tz->trips == 0 || !tz->ops->get_trip_temp)
+	if (tz->num_trips == 0 || !tz->ops->get_trip_temp)
 		return 0;
 
-	for (count = 0; count < tz->trips; count++) {
+	for (count = 0; count < tz->num_trips; count++) {
 		tz->ops->get_trip_temp(tz, count, &trip_temp);
 		if (tz->temperature < trip_temp)
 			break;
@@ -53,7 +53,7 @@ static long get_target_state(struct thermal_zone_device *tz,
 
 	cdev->ops->get_max_state(cdev, &max_state);
 
-	return (long)(percentage * level * max_state) / (100 * tz->trips);
+	return (long)(percentage * level * max_state) / (100 * tz->num_trips);
 }
 
 /**
diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c
index 13e375751d22..1d5052470967 100644
--- a/drivers/thermal/gov_power_allocator.c
+++ b/drivers/thermal/gov_power_allocator.c
@@ -527,7 +527,7 @@ static void get_governor_trips(struct thermal_zone_device *tz,
 	last_active = INVALID_TRIP;
 	last_passive = INVALID_TRIP;
 
-	for (i = 0; i < tz->trips; i++) {
+	for (i = 0; i < tz->num_trips; i++) {
 		enum thermal_trip_type type;
 		int ret;
 
@@ -668,7 +668,7 @@ static int power_allocator_bind(struct thermal_zone_device *tz)
 
 	get_governor_trips(tz, params);
 
-	if (tz->trips > 0) {
+	if (tz->num_trips > 0) {
 		ret = tz->ops->get_trip_temp(tz,
 					params->trip_max_desired_temperature,
 					&control_temp);
diff --git a/drivers/thermal/gov_step_wise.c b/drivers/thermal/gov_step_wise.c
index 12acb12aac50..9729b46d0258 100644
--- a/drivers/thermal/gov_step_wise.c
+++ b/drivers/thermal/gov_step_wise.c
@@ -11,6 +11,7 @@
  */
 
 #include <linux/thermal.h>
+#include <linux/minmax.h>
 #include <trace/events/thermal.h>
 
 #include "thermal_core.h"
@@ -52,10 +53,7 @@ static unsigned long get_target_state(struct thermal_instance *instance,
 
 	if (!instance->initialized) {
 		if (throttle) {
-			next_target = (cur_state + 1) >= instance->upper ?
-					instance->upper :
-					((cur_state + 1) < instance->lower ?
-					instance->lower : (cur_state + 1));
+			next_target = clamp((cur_state + 1), instance->lower, instance->upper);
 		} else {
 			next_target = THERMAL_NO_TARGET;
 		}
@@ -66,35 +64,19 @@ static unsigned long get_target_state(struct thermal_instance *instance,
 	switch (trend) {
 	case THERMAL_TREND_RAISING:
 		if (throttle) {
-			next_target = cur_state < instance->upper ?
-				    (cur_state + 1) : instance->upper;
-			if (next_target < instance->lower)
-				next_target = instance->lower;
+			next_target = clamp((cur_state + 1), instance->lower, instance->upper);
 		}
 		break;
-	case THERMAL_TREND_RAISE_FULL:
-		if (throttle)
-			next_target = instance->upper;
-		break;
 	case THERMAL_TREND_DROPPING:
 		if (cur_state <= instance->lower) {
 			if (!throttle)
 				next_target = THERMAL_NO_TARGET;
 		} else {
 			if (!throttle) {
-				next_target = cur_state - 1;
-				if (next_target > instance->upper)
-					next_target = instance->upper;
+				next_target = clamp((cur_state - 1), instance->lower, instance->upper);
 			}
 		}
 		break;
-	case THERMAL_TREND_DROP_FULL:
-		if (cur_state == instance->lower) {
-			if (!throttle)
-				next_target = THERMAL_NO_TARGET;
-		} else
-			next_target = instance->lower;
-		break;
 	default:
 		break;
 	}
diff --git a/drivers/thermal/intel/intel_pch_thermal.c b/drivers/thermal/intel/intel_pch_thermal.c
index c1fa2b29b153..dabf11a687a1 100644
--- a/drivers/thermal/intel/intel_pch_thermal.c
+++ b/drivers/thermal/intel/intel_pch_thermal.c
@@ -207,14 +207,6 @@ static int pch_wpt_suspend(struct pch_thermal_device *ptd)
 		return 0;
 	}
 
-	/* Do not check temperature if it is not a S0ix capable platform */
-#ifdef CONFIG_ACPI
-	if (!(acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0))
-		return 0;
-#else
-	return 0;
-#endif
-
 	/* Do not check temperature if it is not s2idle */
 	if (pm_suspend_via_firmware())
 		return 0;
diff --git a/drivers/thermal/intel/x86_pkg_temp_thermal.c b/drivers/thermal/intel/x86_pkg_temp_thermal.c
index 4d8edc61a78b..a0e234fce71a 100644
--- a/drivers/thermal/intel/x86_pkg_temp_thermal.c
+++ b/drivers/thermal/intel/x86_pkg_temp_thermal.c
@@ -105,7 +105,7 @@ static struct zone_device *pkg_temp_thermal_get_dev(unsigned int cpu)
 }
 
 /*
-* tj-max is is interesting because threshold is set relative to this
+* tj-max is interesting because threshold is set relative to this
 * temperature.
 */
 static int get_tj_max(int cpu, u32 *tj_max)
diff --git a/drivers/thermal/k3_j72xx_bandgap.c b/drivers/thermal/k3_j72xx_bandgap.c
index 64e323158952..115a44eb4fbf 100644
--- a/drivers/thermal/k3_j72xx_bandgap.c
+++ b/drivers/thermal/k3_j72xx_bandgap.c
@@ -151,8 +151,6 @@ static int prep_lookup_table(struct err_values *err_vals, int *ref_table)
 		/* 300 milli celsius steps */
 		while (i--)
 			derived_table[i] = derived_table[i + 1] - 300;
-		/* case 0 */
-		derived_table[i] = derived_table[i + 1] - 300;
 	}
 
 	/*
@@ -433,7 +431,7 @@ static int k3_j72xx_bandgap_probe(struct platform_device *pdev)
 				     GFP_KERNEL);
 	if (!derived_table) {
 		ret = -ENOMEM;
-		goto err_alloc;
+		goto err_free_ref_table;
 	}
 
 	/* Workaround not needed if bit30/bit31 is set even for J721e */
@@ -483,7 +481,7 @@ static int k3_j72xx_bandgap_probe(struct platform_device *pdev)
 		if (IS_ERR(ti_thermal)) {
 			dev_err(bgp->dev, "thermal zone device is NULL\n");
 			ret = PTR_ERR(ti_thermal);
-			goto err_alloc;
+			goto err_free_ref_table;
 		}
 	}
 
@@ -514,6 +512,9 @@ static int k3_j72xx_bandgap_probe(struct platform_device *pdev)
 
 	return 0;
 
+err_free_ref_table:
+	kfree(ref_table);
+
 err_alloc:
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
@@ -529,11 +530,11 @@ static int k3_j72xx_bandgap_remove(struct platform_device *pdev)
 	return 0;
 }
 
-const struct k3_j72xx_bandgap_data k3_j72xx_bandgap_j721e_data = {
+static const struct k3_j72xx_bandgap_data k3_j72xx_bandgap_j721e_data = {
 	.has_errata_i2128 = 1,
 };
 
-const struct k3_j72xx_bandgap_data k3_j72xx_bandgap_j7200_data = {
+static const struct k3_j72xx_bandgap_data k3_j72xx_bandgap_j7200_data = {
 	.has_errata_i2128 = 0,
 };
 
diff --git a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
index d9c9c975f931..073943cbcc2b 100644
--- a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
+++ b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
@@ -20,6 +20,8 @@
 #include <linux/thermal.h>
 #include <asm-generic/unaligned.h>
 
+#include "../thermal_hwmon.h"
+
 /*
  * Thermal monitoring block consists of 8 (ADC_TM5_NUM_CHANNELS) channels. Each
  * channel is programmed to use one of ADC channels for voltage comparison.
@@ -687,6 +689,9 @@ static int adc_tm5_register_tzd(struct adc_tm5_chip *adc_tm)
 			return PTR_ERR(tzd);
 		}
 		adc_tm->channels[i].tzd = tzd;
+		if (devm_thermal_add_hwmon_sysfs(tzd))
+			dev_warn(adc_tm->dev,
+				 "Failed to add hwmon sysfs attributes\n");
 	}
 
 	return 0;
diff --git a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
index 7419e196dbb0..770f82cc9bca 100644
--- a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
+++ b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
@@ -16,6 +16,7 @@
 #include <linux/thermal.h>
 
 #include "../thermal_core.h"
+#include "../thermal_hwmon.h"
 
 #define QPNP_TM_REG_DIG_MAJOR		0x01
 #define QPNP_TM_REG_TYPE		0x04
@@ -458,6 +459,10 @@ static int qpnp_tm_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	if (devm_thermal_add_hwmon_sysfs(chip->tz_dev))
+		dev_warn(&pdev->dev,
+			 "Failed to add hwmon sysfs attributes\n");
+
 	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, qpnp_tm_isr,
 					IRQF_ONESHOT, node->name, chip);
 	if (ret < 0)
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 7963ee33bf75..e49f58e83513 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -933,17 +933,6 @@ static int tsens_get_temp(void *data, int *temp)
 	return priv->ops->get_temp(s, temp);
 }
 
-static int tsens_get_trend(void *data, int trip, enum thermal_trend *trend)
-{
-	struct tsens_sensor *s = data;
-	struct tsens_priv *priv = s->priv;
-
-	if (priv->ops->get_trend)
-		return priv->ops->get_trend(s, trend);
-
-	return -ENOTSUPP;
-}
-
 static int  __maybe_unused tsens_suspend(struct device *dev)
 {
 	struct tsens_priv *priv = dev_get_drvdata(dev);
@@ -1004,7 +993,6 @@ MODULE_DEVICE_TABLE(of, tsens_table);
 
 static const struct thermal_zone_of_device_ops tsens_of_ops = {
 	.get_temp = tsens_get_temp,
-	.get_trend = tsens_get_trend,
 	.set_trips = tsens_set_trips,
 };
 
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index 1471a2c00f15..ba05c8233356 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -65,7 +65,6 @@ struct tsens_sensor {
  * @disable: Function to disable the tsens device
  * @suspend: Function to suspend the tsens device
  * @resume: Function to resume the tsens device
- * @get_trend: Function to get the thermal/temp trend
  */
 struct tsens_ops {
 	/* mandatory callbacks */
@@ -77,7 +76,6 @@ struct tsens_ops {
 	void (*disable)(struct tsens_priv *priv);
 	int (*suspend)(struct tsens_priv *priv);
 	int (*resume)(struct tsens_priv *priv);
-	int (*get_trend)(struct tsens_sensor *s, enum thermal_trend *trend);
 };
 
 #define REG_FIELD_FOR_EACH_SENSOR11(_name, _offset, _startbit, _stopbit) \
diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
index ccdf8a24ddc7..cda7c52f2319 100644
--- a/drivers/thermal/rcar_gen3_thermal.c
+++ b/drivers/thermal/rcar_gen3_thermal.c
@@ -511,7 +511,7 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 		zone = devm_thermal_zone_of_sensor_register(dev, i, tsc,
 							    &rcar_gen3_tz_of_ops);
 		if (IS_ERR(zone)) {
-			dev_err(dev, "Can't register thermal zone\n");
+			dev_err(dev, "Sensor %u: Can't register thermal zone\n", i);
 			ret = PTR_ERR(zone);
 			goto error_unregister;
 		}
@@ -533,7 +533,7 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 		if (ret < 0)
 			goto error_unregister;
 
-		dev_info(dev, "TSC%u: Loaded %d trip points\n", i, ret);
+		dev_info(dev, "Sensor %u: Loaded %d trip points\n", i, ret);
 	}
 
 	if (!priv->num_tscs) {
diff --git a/drivers/thermal/rzg2l_thermal.c b/drivers/thermal/rzg2l_thermal.c
index be07e04c6926..51ae80eda6af 100644
--- a/drivers/thermal/rzg2l_thermal.c
+++ b/drivers/thermal/rzg2l_thermal.c
@@ -47,7 +47,7 @@
 
 #define TS_CODE_AVE_SCALE(x)	((x) * 1000000)
 #define MCELSIUS(temp)		((temp) * MILLIDEGREE_PER_DEGREE)
-#define TS_CODE_CAP_TIMES	8	/* Capture  times */
+#define TS_CODE_CAP_TIMES	8	/* Total number of ADC data samples */
 
 #define RZG2L_THERMAL_GRAN	500	/* milli Celsius */
 #define RZG2L_TSU_SS_TIMEOUT_US	1000
@@ -80,7 +80,8 @@ static int rzg2l_thermal_get_temp(void *devdata, int *temp)
 	int val, i;
 
 	for (i = 0; i < TS_CODE_CAP_TIMES ; i++) {
-		/* TSU repeats measurement at 20 microseconds intervals and
+		/*
+		 * TSU repeats measurement at 20 microseconds intervals and
 		 * automatically updates the results of measurement. As per
 		 * the HW manual for measuring temperature we need to read 8
 		 * values consecutively and then take the average.
@@ -92,16 +93,18 @@ static int rzg2l_thermal_get_temp(void *devdata, int *temp)
 
 	ts_code_ave = result / TS_CODE_CAP_TIMES;
 
-	/* Calculate actual sensor value by applying curvature correction formula
+	/*
+	 * Calculate actual sensor value by applying curvature correction formula
 	 * dsensor = ts_code_ave / (1 + ts_code_ave * 0.000013). Here we are doing
 	 * integer calculation by scaling all the values by 1000000.
 	 */
 	dsensor = TS_CODE_AVE_SCALE(ts_code_ave) /
 		(TS_CODE_AVE_SCALE(1) + (ts_code_ave * CURVATURE_CORRECTION_CONST));
 
-	/* The temperature Tj is calculated by the formula
+	/*
+	 * The temperature Tj is calculated by the formula
 	 * Tj = (dsensor − calib1) * 165/ (calib0 − calib1) − 40
-	 * where calib0 and calib1 are the caliberation values.
+	 * where calib0 and calib1 are the calibration values.
 	 */
 	val = ((dsensor - priv->calib1) * (MCELSIUS(165) /
 		(priv->calib0 - priv->calib1))) - MCELSIUS(40);
@@ -122,7 +125,8 @@ static int rzg2l_thermal_init(struct rzg2l_thermal_priv *priv)
 	rzg2l_thermal_write(priv, TSU_SM, TSU_SM_NORMAL_MODE);
 	rzg2l_thermal_write(priv, TSU_ST, 0);
 
-	/* Before setting the START bit, TSU should be in normal operating
+	/*
+	 * Before setting the START bit, TSU should be in normal operating
 	 * mode. As per the HW manual, it will take 60 µs to place the TSU
 	 * into normal operating mode.
 	 */
@@ -217,7 +221,7 @@ static int rzg2l_thermal_probe(struct platform_device *pdev)
 	if (ret)
 		goto err;
 
-	dev_dbg(dev, "TSU probed with %s caliberation values",
+	dev_dbg(dev, "TSU probed with %s calibration values",
 		rzg2l_thermal_read(priv, OTPTSUTRIM_REG(0)) ?  "hw" : "sw");
 
 	return 0;
diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
index d9cd23cbb671..212c87e63a66 100644
--- a/drivers/thermal/sun8i_thermal.c
+++ b/drivers/thermal/sun8i_thermal.c
@@ -237,7 +237,7 @@ static int sun50i_h6_ths_calibrate(struct ths_device *tmdev,
 	 * The calibration data on the H6 is the ambient temperature and
 	 * sensor values that are filled during the factory test stage.
 	 *
-	 * The unit of stored FT temperature is 0.1 degreee celusis.
+	 * The unit of stored FT temperature is 0.1 degree celsius.
 	 *
 	 * We need to calculate a delta between measured and caluclated
 	 * register values and this will become a calibration offset.
diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c
index 210325f92559..825eab526619 100644
--- a/drivers/thermal/tegra/soctherm.c
+++ b/drivers/thermal/tegra/soctherm.c
@@ -633,37 +633,6 @@ static int tegra_thermctl_set_trip_temp(void *data, int trip, int temp)
 	return 0;
 }
 
-static int tegra_thermctl_get_trend(void *data, int trip,
-				    enum thermal_trend *trend)
-{
-	struct tegra_thermctl_zone *zone = data;
-	struct thermal_zone_device *tz = zone->tz;
-	int trip_temp, temp, last_temp, ret;
-
-	if (!tz)
-		return -EINVAL;
-
-	ret = tz->ops->get_trip_temp(zone->tz, trip, &trip_temp);
-	if (ret)
-		return ret;
-
-	temp = READ_ONCE(tz->temperature);
-	last_temp = READ_ONCE(tz->last_temperature);
-
-	if (temp > trip_temp) {
-		if (temp >= last_temp)
-			*trend = THERMAL_TREND_RAISING;
-		else
-			*trend = THERMAL_TREND_STABLE;
-	} else if (temp < trip_temp) {
-		*trend = THERMAL_TREND_DROPPING;
-	} else {
-		*trend = THERMAL_TREND_STABLE;
-	}
-
-	return 0;
-}
-
 static void thermal_irq_enable(struct tegra_thermctl_zone *zn)
 {
 	u32 r;
@@ -716,7 +685,6 @@ static int tegra_thermctl_set_trips(void *data, int lo, int hi)
 static const struct thermal_zone_of_device_ops tegra_of_thermal_ops = {
 	.get_temp = tegra_thermctl_get_temp,
 	.set_trip_temp = tegra_thermctl_set_trip_temp,
-	.get_trend = tegra_thermctl_get_trend,
 	.set_trips = tegra_thermctl_set_trips,
 };
 
diff --git a/drivers/thermal/tegra/tegra30-tsensor.c b/drivers/thermal/tegra/tegra30-tsensor.c
index 9b6b693cbcf8..05886684f429 100644
--- a/drivers/thermal/tegra/tegra30-tsensor.c
+++ b/drivers/thermal/tegra/tegra30-tsensor.c
@@ -316,7 +316,7 @@ static void tegra_tsensor_get_hw_channel_trips(struct thermal_zone_device *tzd,
 	*hot_trip  = 85000;
 	*crit_trip = 90000;
 
-	for (i = 0; i < tzd->trips; i++) {
+	for (i = 0; i < tzd->num_trips; i++) {
 		enum thermal_trip_type type;
 		int trip_temp;
 
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index cdc0552e8c42..6a5d0ae5d7a4 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -340,12 +340,8 @@ void thermal_zone_device_critical(struct thermal_zone_device *tz)
 EXPORT_SYMBOL(thermal_zone_device_critical);
 
 static void handle_critical_trips(struct thermal_zone_device *tz,
-				  int trip, enum thermal_trip_type trip_type)
+				  int trip, int trip_temp, enum thermal_trip_type trip_type)
 {
-	int trip_temp;
-
-	tz->ops->get_trip_temp(tz, trip, &trip_temp);
-
 	/* If we have not crossed the trip_temp, we do not care. */
 	if (trip_temp <= 0 || tz->temperature < trip_temp)
 		return;
@@ -384,7 +380,7 @@ static void handle_thermal_trip(struct thermal_zone_device *tz, int trip)
 	}
 
 	if (type == THERMAL_TRIP_CRITICAL || type == THERMAL_TRIP_HOT)
-		handle_critical_trips(tz, trip, type);
+		handle_critical_trips(tz, trip, trip_temp, type);
 	else
 		handle_non_critical_trips(tz, trip);
 	/*
@@ -505,7 +501,7 @@ void thermal_zone_device_update(struct thermal_zone_device *tz,
 
 	tz->notify_event = event;
 
-	for (count = 0; count < tz->trips; count++)
+	for (count = 0; count < tz->num_trips; count++)
 		handle_thermal_trip(tz, count);
 }
 EXPORT_SYMBOL_GPL(thermal_zone_device_update);
@@ -630,7 +626,7 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
 	unsigned long max_state;
 	int result, ret;
 
-	if (trip >= tz->trips || trip < 0)
+	if (trip >= tz->num_trips || trip < 0)
 		return -EINVAL;
 
 	list_for_each_entry(pos1, &thermal_tz_list, node) {
@@ -667,7 +663,7 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
 	dev->target = THERMAL_NO_TARGET;
 	dev->weight = weight;
 
-	result = ida_simple_get(&tz->ida, 0, 0, GFP_KERNEL);
+	result = ida_alloc(&tz->ida, GFP_KERNEL);
 	if (result < 0)
 		goto free_mem;
 
@@ -721,7 +717,7 @@ remove_trip_file:
 remove_symbol_link:
 	sysfs_remove_link(&tz->device.kobj, dev->name);
 release_ida:
-	ida_simple_remove(&tz->ida, dev->id);
+	ida_free(&tz->ida, dev->id);
 free_mem:
 	kfree(dev);
 	return result;
@@ -768,7 +764,7 @@ unbind:
 	device_remove_file(&tz->device, &pos->weight_attr);
 	device_remove_file(&tz->device, &pos->attr);
 	sysfs_remove_link(&tz->device.kobj, pos->name);
-	ida_simple_remove(&tz->ida, pos->id);
+	ida_free(&tz->ida, pos->id);
 	kfree(pos);
 	return 0;
 }
@@ -811,7 +807,7 @@ static void __bind(struct thermal_zone_device *tz, int mask,
 {
 	int i, ret;
 
-	for (i = 0; i < tz->trips; i++) {
+	for (i = 0; i < tz->num_trips; i++) {
 		if (mask & (1 << i)) {
 			unsigned long upper, lower;
 
@@ -901,7 +897,7 @@ __thermal_cooling_device_register(struct device_node *np,
 	if (!cdev)
 		return ERR_PTR(-ENOMEM);
 
-	ret = ida_simple_get(&thermal_cdev_ida, 0, 0, GFP_KERNEL);
+	ret = ida_alloc(&thermal_cdev_ida, GFP_KERNEL);
 	if (ret < 0)
 		goto out_kfree_cdev;
 	cdev->id = ret;
@@ -952,7 +948,7 @@ out_kfree_type:
 	put_device(&cdev->device);
 	cdev = NULL;
 out_ida_remove:
-	ida_simple_remove(&thermal_cdev_ida, id);
+	ida_free(&thermal_cdev_ida, id);
 out_kfree_cdev:
 	kfree(cdev);
 	return ERR_PTR(ret);
@@ -1057,7 +1053,7 @@ static void __unbind(struct thermal_zone_device *tz, int mask,
 {
 	int i;
 
-	for (i = 0; i < tz->trips; i++)
+	for (i = 0; i < tz->num_trips; i++)
 		if (mask & (1 << i))
 			thermal_zone_unbind_cooling_device(tz, i, cdev);
 }
@@ -1111,7 +1107,7 @@ void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev)
 
 	mutex_unlock(&thermal_list_lock);
 
-	ida_simple_remove(&thermal_cdev_ida, cdev->id);
+	ida_free(&thermal_cdev_ida, cdev->id);
 	device_del(&cdev->device);
 	thermal_cooling_device_destroy_sysfs(cdev);
 	kfree(cdev->type);
@@ -1159,10 +1155,18 @@ exit:
 	mutex_unlock(&thermal_list_lock);
 }
 
+static void thermal_set_delay_jiffies(unsigned long *delay_jiffies, int delay_ms)
+{
+	*delay_jiffies = msecs_to_jiffies(delay_ms);
+	if (delay_ms > 1000)
+		*delay_jiffies = round_jiffies(*delay_jiffies);
+}
+
 /**
- * thermal_zone_device_register() - register a new thermal zone device
+ * thermal_zone_device_register_with_trips() - register a new thermal zone device
  * @type:	the thermal zone device type
- * @trips:	the number of trip points the thermal zone support
+ * @trips:	a pointer to an array of thermal trips
+ * @num_trips:	the number of trip points the thermal zone support
  * @mask:	a bit string indicating the writeablility of trip points
  * @devdata:	private device data
  * @ops:	standard thermal zone device callbacks
@@ -1184,10 +1188,10 @@ exit:
  * IS_ERR*() helpers.
  */
 struct thermal_zone_device *
-thermal_zone_device_register(const char *type, int trips, int mask,
-			     void *devdata, struct thermal_zone_device_ops *ops,
-			     struct thermal_zone_params *tzp, int passive_delay,
-			     int polling_delay)
+thermal_zone_device_register_with_trips(const char *type, struct thermal_trip *trips, int num_trips, int mask,
+					void *devdata, struct thermal_zone_device_ops *ops,
+					struct thermal_zone_params *tzp, int passive_delay,
+					int polling_delay)
 {
 	struct thermal_zone_device *tz;
 	enum thermal_trip_type trip_type;
@@ -1198,27 +1202,27 @@ thermal_zone_device_register(const char *type, int trips, int mask,
 	struct thermal_governor *governor;
 
 	if (!type || strlen(type) == 0) {
-		pr_err("Error: No thermal zone type defined\n");
+		pr_err("No thermal zone type defined\n");
 		return ERR_PTR(-EINVAL);
 	}
 
 	if (type && strlen(type) >= THERMAL_NAME_LENGTH) {
-		pr_err("Error: Thermal zone name (%s) too long, should be under %d chars\n",
+		pr_err("Thermal zone name (%s) too long, should be under %d chars\n",
 		       type, THERMAL_NAME_LENGTH);
 		return ERR_PTR(-EINVAL);
 	}
 
-	if (trips > THERMAL_MAX_TRIPS || trips < 0 || mask >> trips) {
-		pr_err("Error: Incorrect number of thermal trips\n");
+	if (num_trips > THERMAL_MAX_TRIPS || num_trips < 0 || mask >> num_trips) {
+		pr_err("Incorrect number of thermal trips\n");
 		return ERR_PTR(-EINVAL);
 	}
 
 	if (!ops) {
-		pr_err("Error: Thermal zone device ops not defined\n");
+		pr_err("Thermal zone device ops not defined\n");
 		return ERR_PTR(-EINVAL);
 	}
 
-	if (trips > 0 && (!ops->get_trip_type || !ops->get_trip_temp))
+	if (num_trips > 0 && (!ops->get_trip_type || !ops->get_trip_temp))
 		return ERR_PTR(-EINVAL);
 
 	tz = kzalloc(sizeof(*tz), GFP_KERNEL);
@@ -1228,7 +1232,7 @@ thermal_zone_device_register(const char *type, int trips, int mask,
 	INIT_LIST_HEAD(&tz->thermal_instances);
 	ida_init(&tz->ida);
 	mutex_init(&tz->lock);
-	id = ida_simple_get(&thermal_tz_ida, 0, 0, GFP_KERNEL);
+	id = ida_alloc(&thermal_tz_ida, GFP_KERNEL);
 	if (id < 0) {
 		result = id;
 		goto free_tz;
@@ -1249,6 +1253,7 @@ thermal_zone_device_register(const char *type, int trips, int mask,
 	tz->device.class = &thermal_class;
 	tz->devdata = devdata;
 	tz->trips = trips;
+	tz->num_trips = num_trips;
 
 	thermal_set_delay_jiffies(&tz->passive_delay_jiffies, passive_delay);
 	thermal_set_delay_jiffies(&tz->polling_delay_jiffies, polling_delay);
@@ -1266,7 +1271,7 @@ thermal_zone_device_register(const char *type, int trips, int mask,
 	if (result)
 		goto release_device;
 
-	for (count = 0; count < trips; count++) {
+	for (count = 0; count < num_trips; count++) {
 		if (tz->ops->get_trip_type(tz, count, &trip_type) ||
 		    tz->ops->get_trip_temp(tz, count, &trip_temp) ||
 		    !trip_temp)
@@ -1319,11 +1324,21 @@ release_device:
 	put_device(&tz->device);
 	tz = NULL;
 remove_id:
-	ida_simple_remove(&thermal_tz_ida, id);
+	ida_free(&thermal_tz_ida, id);
 free_tz:
 	kfree(tz);
 	return ERR_PTR(result);
 }
+
+struct thermal_zone_device *thermal_zone_device_register(const char *type, int ntrips, int mask,
+							 void *devdata, struct thermal_zone_device_ops *ops,
+							 struct thermal_zone_params *tzp, int passive_delay,
+							 int polling_delay)
+{
+	return thermal_zone_device_register_with_trips(type, NULL, ntrips, mask,
+						       devdata, ops, tzp,
+						       passive_delay, polling_delay);
+}
 EXPORT_SYMBOL_GPL(thermal_zone_device_register);
 
 /**
@@ -1379,7 +1394,7 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz)
 	thermal_set_governor(tz, NULL);
 
 	thermal_remove_hwmon_sysfs(tz);
-	ida_simple_remove(&thermal_tz_ida, tz->id);
+	ida_free(&thermal_tz_ida, tz->id);
 	ida_destroy(&tz->ida);
 	mutex_destroy(&tz->lock);
 	device_unregister(&tz->device);
diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h
index 726e327b4205..c991bb290512 100644
--- a/drivers/thermal/thermal_core.h
+++ b/drivers/thermal/thermal_core.h
@@ -68,20 +68,6 @@ static inline bool cdev_is_power_actor(struct thermal_cooling_device *cdev)
 void thermal_cdev_update(struct thermal_cooling_device *);
 void __thermal_cdev_update(struct thermal_cooling_device *cdev);
 
-/**
- * struct thermal_trip - representation of a point in temperature domain
- * @np: pointer to struct device_node that this trip point was created from
- * @temperature: temperature value in miliCelsius
- * @hysteresis: relative hysteresis in miliCelsius
- * @type: trip point type
- */
-struct thermal_trip {
-	struct device_node *np;
-	int temperature;
-	int hysteresis;
-	enum thermal_trip_type type;
-};
-
 int get_tz_trend(struct thermal_zone_device *tz, int trip);
 
 struct thermal_instance *
@@ -126,7 +112,6 @@ int thermal_build_list_of_policies(char *buf);
 
 /* Helpers */
 void thermal_zone_set_trips(struct thermal_zone_device *tz);
-void thermal_set_delay_jiffies(unsigned long *delay_jiffies, int delay_ms);
 
 /* sysfs I/F */
 int thermal_zone_create_device_groups(struct thermal_zone_device *, int);
diff --git a/drivers/thermal/thermal_helpers.c b/drivers/thermal/thermal_helpers.c
index 3edd047e144f..690890f054a3 100644
--- a/drivers/thermal/thermal_helpers.c
+++ b/drivers/thermal/thermal_helpers.c
@@ -39,7 +39,6 @@ int get_tz_trend(struct thermal_zone_device *tz, int trip)
 
 	return trend;
 }
-EXPORT_SYMBOL(get_tz_trend);
 
 struct thermal_instance *
 get_thermal_instance(struct thermal_zone_device *tz,
@@ -90,7 +89,7 @@ int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp)
 	ret = tz->ops->get_temp(tz, temp);
 
 	if (IS_ENABLED(CONFIG_THERMAL_EMULATION) && tz->emul_temperature) {
-		for (count = 0; count < tz->trips; count++) {
+		for (count = 0; count < tz->num_trips; count++) {
 			ret = tz->ops->get_trip_type(tz, count, &type);
 			if (!ret && type == THERMAL_TRIP_CRITICAL) {
 				ret = tz->ops->get_trip_temp(tz, count,
@@ -138,7 +137,7 @@ void thermal_zone_set_trips(struct thermal_zone_device *tz)
 	if (!tz->ops->set_trips || !tz->ops->get_trip_hyst)
 		goto exit;
 
-	for (i = 0; i < tz->trips; i++) {
+	for (i = 0; i < tz->num_trips; i++) {
 		int trip_low;
 
 		tz->ops->get_trip_temp(tz, i, &trip_temp);
@@ -175,13 +174,6 @@ exit:
 	mutex_unlock(&tz->lock);
 }
 
-void thermal_set_delay_jiffies(unsigned long *delay_jiffies, int delay_ms)
-{
-	*delay_jiffies = msecs_to_jiffies(delay_ms);
-	if (delay_ms > 1000)
-		*delay_jiffies = round_jiffies(*delay_jiffies);
-}
-
 static void thermal_cdev_set_cur_state(struct thermal_cooling_device *cdev,
 				       int target)
 {
@@ -228,7 +220,6 @@ void thermal_cdev_update(struct thermal_cooling_device *cdev)
 	}
 	mutex_unlock(&cdev->lock);
 }
-EXPORT_SYMBOL(thermal_cdev_update);
 
 /**
  * thermal_zone_get_slope - return the slope attribute of the thermal zone
diff --git a/drivers/thermal/thermal_netlink.c b/drivers/thermal/thermal_netlink.c
index 32fea5174cc0..050d243a5fa1 100644
--- a/drivers/thermal/thermal_netlink.c
+++ b/drivers/thermal/thermal_netlink.c
@@ -469,7 +469,7 @@ static int thermal_genl_cmd_tz_get_trip(struct param *p)
 
 	mutex_lock(&tz->lock);
 
-	for (i = 0; i < tz->trips; i++) {
+	for (i = 0; i < tz->num_trips; i++) {
 
 		enum thermal_trip_type type;
 		int temp, hyst = 0;
diff --git a/drivers/thermal/thermal_of.c b/drivers/thermal/thermal_of.c
index b65d435cb92f..802c30b72a92 100644
--- a/drivers/thermal/thermal_of.c
+++ b/drivers/thermal/thermal_of.c
@@ -118,12 +118,7 @@ static int of_thermal_set_trips(struct thermal_zone_device *tz,
  */
 int of_thermal_get_ntrips(struct thermal_zone_device *tz)
 {
-	struct __thermal_zone *data = tz->devdata;
-
-	if (!data || IS_ERR(data))
-		return -ENODEV;
-
-	return data->ntrips;
+	return tz->num_trips;
 }
 EXPORT_SYMBOL_GPL(of_thermal_get_ntrips);
 
@@ -139,9 +134,7 @@ EXPORT_SYMBOL_GPL(of_thermal_get_ntrips);
  */
 bool of_thermal_is_trip_valid(struct thermal_zone_device *tz, int trip)
 {
-	struct __thermal_zone *data = tz->devdata;
-
-	if (!data || trip >= data->ntrips || trip < 0)
+	if (trip >= tz->num_trips || trip < 0)
 		return false;
 
 	return true;
@@ -161,12 +154,7 @@ EXPORT_SYMBOL_GPL(of_thermal_is_trip_valid);
 const struct thermal_trip *
 of_thermal_get_trip_points(struct thermal_zone_device *tz)
 {
-	struct __thermal_zone *data = tz->devdata;
-
-	if (!data)
-		return NULL;
-
-	return data->trips;
+	return tz->trips;
 }
 EXPORT_SYMBOL_GPL(of_thermal_get_trip_points);
 
@@ -281,12 +269,10 @@ static int of_thermal_unbind(struct thermal_zone_device *thermal,
 static int of_thermal_get_trip_type(struct thermal_zone_device *tz, int trip,
 				    enum thermal_trip_type *type)
 {
-	struct __thermal_zone *data = tz->devdata;
-
-	if (trip >= data->ntrips || trip < 0)
+	if (trip >= tz->num_trips || trip < 0)
 		return -EDOM;
 
-	*type = data->trips[trip].type;
+	*type = tz->trips[trip].type;
 
 	return 0;
 }
@@ -294,12 +280,10 @@ static int of_thermal_get_trip_type(struct thermal_zone_device *tz, int trip,
 static int of_thermal_get_trip_temp(struct thermal_zone_device *tz, int trip,
 				    int *temp)
 {
-	struct __thermal_zone *data = tz->devdata;
-
-	if (trip >= data->ntrips || trip < 0)
+	if (trip >= tz->num_trips || trip < 0)
 		return -EDOM;
 
-	*temp = data->trips[trip].temperature;
+	*temp = tz->trips[trip].temperature;
 
 	return 0;
 }
@@ -309,7 +293,7 @@ static int of_thermal_set_trip_temp(struct thermal_zone_device *tz, int trip,
 {
 	struct __thermal_zone *data = tz->devdata;
 
-	if (trip >= data->ntrips || trip < 0)
+	if (trip >= tz->num_trips || trip < 0)
 		return -EDOM;
 
 	if (data->ops && data->ops->set_trip_temp) {
@@ -321,7 +305,7 @@ static int of_thermal_set_trip_temp(struct thermal_zone_device *tz, int trip,
 	}
 
 	/* thermal framework should take care of data->mask & (1 << trip) */
-	data->trips[trip].temperature = temp;
+	tz->trips[trip].temperature = temp;
 
 	return 0;
 }
@@ -329,12 +313,10 @@ static int of_thermal_set_trip_temp(struct thermal_zone_device *tz, int trip,
 static int of_thermal_get_trip_hyst(struct thermal_zone_device *tz, int trip,
 				    int *hyst)
 {
-	struct __thermal_zone *data = tz->devdata;
-
-	if (trip >= data->ntrips || trip < 0)
+	if (trip >= tz->num_trips || trip < 0)
 		return -EDOM;
 
-	*hyst = data->trips[trip].hysteresis;
+	*hyst = tz->trips[trip].hysteresis;
 
 	return 0;
 }
@@ -342,13 +324,11 @@ static int of_thermal_get_trip_hyst(struct thermal_zone_device *tz, int trip,
 static int of_thermal_set_trip_hyst(struct thermal_zone_device *tz, int trip,
 				    int hyst)
 {
-	struct __thermal_zone *data = tz->devdata;
-
-	if (trip >= data->ntrips || trip < 0)
+	if (trip >= tz->num_trips || trip < 0)
 		return -EDOM;
 
 	/* thermal framework should take care of data->mask & (1 << trip) */
-	data->trips[trip].hysteresis = hyst;
+	tz->trips[trip].hysteresis = hyst;
 
 	return 0;
 }
@@ -356,12 +336,11 @@ static int of_thermal_set_trip_hyst(struct thermal_zone_device *tz, int trip,
 static int of_thermal_get_crit_temp(struct thermal_zone_device *tz,
 				    int *temp)
 {
-	struct __thermal_zone *data = tz->devdata;
 	int i;
 
-	for (i = 0; i < data->ntrips; i++)
-		if (data->trips[i].type == THERMAL_TRIP_CRITICAL) {
-			*temp = data->trips[i].temperature;
+	for (i = 0; i < tz->num_trips; i++)
+		if (tz->trips[i].type == THERMAL_TRIP_CRITICAL) {
+			*temp = tz->trips[i].temperature;
 			return 0;
 		}
 
@@ -671,6 +650,35 @@ EXPORT_SYMBOL_GPL(devm_thermal_zone_of_sensor_unregister);
 
 /***   functions parsing device tree nodes   ***/
 
+static int of_find_trip_id(struct device_node *np, struct device_node *trip)
+{
+	struct device_node *trips;
+	struct device_node *t;
+	int i = 0;
+
+	trips = of_get_child_by_name(np, "trips");
+	if (!trips) {
+		pr_err("Failed to find 'trips' node\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Find the trip id point associated with the cooling device map
+	 */
+	for_each_child_of_node(trips, t) {
+
+		if (t == trip)
+			goto out;
+		i++;
+	}
+
+	i = -ENXIO;
+out:
+	of_node_put(trips);
+
+	return i;
+}
+
 /**
  * thermal_of_populate_bind_params - parse and fill cooling map data
  * @np: DT node containing a cooling-map node
@@ -685,15 +693,15 @@ EXPORT_SYMBOL_GPL(devm_thermal_zone_of_sensor_unregister);
  *
  * Return: 0 on success, proper error code otherwise
  */
-static int thermal_of_populate_bind_params(struct device_node *np,
-					   struct __thermal_bind_params *__tbp,
-					   struct thermal_trip *trips,
-					   int ntrips)
+static int thermal_of_populate_bind_params(struct device_node *tz_np,
+					   struct device_node *np,
+					   struct __thermal_bind_params *__tbp)
 {
 	struct of_phandle_args cooling_spec;
 	struct __thermal_cooling_bind_param *__tcbp;
 	struct device_node *trip;
 	int ret, i, count;
+	int trip_id;
 	u32 prop;
 
 	/* Default weight. Usage is optional */
@@ -708,18 +716,14 @@ static int thermal_of_populate_bind_params(struct device_node *np,
 		return -ENODEV;
 	}
 
-	/* match using device_node */
-	for (i = 0; i < ntrips; i++)
-		if (trip == trips[i].np) {
-			__tbp->trip_id = i;
-			break;
-		}
-
-	if (i == ntrips) {
-		ret = -ENODEV;
+	trip_id = of_find_trip_id(tz_np, trip);
+	if (trip_id < 0) {
+		ret = trip_id;
 		goto end;
 	}
 
+	__tbp->trip_id = trip_id;
+
 	count = of_count_phandle_with_args(np, "cooling-device",
 					   "#cooling-cells");
 	if (count <= 0) {
@@ -843,13 +847,56 @@ static int thermal_of_populate_trip(struct device_node *np,
 		return ret;
 	}
 
-	/* Required for cooling map matching */
-	trip->np = np;
-	of_node_get(np);
-
 	return 0;
 }
 
+static struct thermal_trip *thermal_of_trips_init(struct device_node *np, int *ntrips)
+{
+	struct thermal_trip *tt;
+	struct device_node *trips, *trip;
+	int ret, count;
+
+	trips = of_get_child_by_name(np, "trips");
+	if (!trips) {
+		pr_err("Failed to find 'trips' node\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	count = of_get_child_count(trips);
+	if (!count) {
+		pr_err("No trip point defined\n");
+		ret = -EINVAL;
+		goto out_of_node_put;
+	}
+
+	tt = kzalloc(sizeof(*tt) * count, GFP_KERNEL);
+	if (!tt) {
+		ret = -ENOMEM;
+		goto out_of_node_put;
+	}
+
+	*ntrips = count;
+
+	count = 0;
+	for_each_child_of_node(trips, trip) {
+		ret = thermal_of_populate_trip(trip, &tt[count++]);
+		if (ret)
+			goto out_kfree;
+	}
+
+	of_node_put(trips);
+
+	return tt;
+
+out_kfree:
+	kfree(tt);
+	*ntrips = 0;
+out_of_node_put:
+	of_node_put(trips);
+
+	return ERR_PTR(ret);
+}
+
 /**
  * thermal_of_build_thermal_zone - parse and fill one thermal zone data
  * @np: DT node containing a thermal zone node
@@ -909,32 +956,12 @@ __init *thermal_of_build_thermal_zone(struct device_node *np)
 		tz->offset = 0;
 	}
 
-	/* trips */
-	child = of_get_child_by_name(np, "trips");
-
-	/* No trips provided */
-	if (!child)
+	tz->trips = thermal_of_trips_init(np, &tz->ntrips);
+	if (IS_ERR(tz->trips)) {
+		ret = PTR_ERR(tz->trips);
 		goto finish;
-
-	tz->ntrips = of_get_child_count(child);
-	if (tz->ntrips == 0) /* must have at least one child */
-		goto finish;
-
-	tz->trips = kcalloc(tz->ntrips, sizeof(*tz->trips), GFP_KERNEL);
-	if (!tz->trips) {
-		ret = -ENOMEM;
-		goto free_tz;
 	}
 
-	i = 0;
-	for_each_child_of_node(child, gchild) {
-		ret = thermal_of_populate_trip(gchild, &tz->trips[i++]);
-		if (ret)
-			goto free_trips;
-	}
-
-	of_node_put(child);
-
 	/* cooling-maps */
 	child = of_get_child_by_name(np, "cooling-maps");
 
@@ -954,10 +981,11 @@ __init *thermal_of_build_thermal_zone(struct device_node *np)
 
 	i = 0;
 	for_each_child_of_node(child, gchild) {
-		ret = thermal_of_populate_bind_params(gchild, &tz->tbps[i++],
-						      tz->trips, tz->ntrips);
-		if (ret)
+		ret = thermal_of_populate_bind_params(np, gchild, &tz->tbps[i++]);
+		if (ret) {
+			of_node_put(gchild);
 			goto free_tbps;
+		}
 	}
 
 finish:
@@ -978,10 +1006,7 @@ free_tbps:
 
 	kfree(tz->tbps);
 free_trips:
-	for (i = 0; i < tz->ntrips; i++)
-		of_node_put(tz->trips[i].np);
 	kfree(tz->trips);
-	of_node_put(gchild);
 free_tz:
 	kfree(tz);
 	of_node_put(child);
@@ -1004,8 +1029,6 @@ static __init void of_thermal_free_zone(struct __thermal_zone *tz)
 	}
 
 	kfree(tz->tbps);
-	for (i = 0; i < tz->ntrips; i++)
-		of_node_put(tz->trips[i].np);
 	kfree(tz->trips);
 	kfree(tz);
 }
@@ -1103,11 +1126,9 @@ int __init of_parse_thermal_zones(void)
 		tzp->slope = tz->slope;
 		tzp->offset = tz->offset;
 
-		zone = thermal_zone_device_register(child->name, tz->ntrips,
-						    mask, tz,
-						    ops, tzp,
-						    tz->passive_delay,
-						    tz->polling_delay);
+		zone = thermal_zone_device_register_with_trips(child->name, tz->trips, tz->ntrips,
+							       mask, tz, ops, tzp, tz->passive_delay,
+							       tz->polling_delay);
 		if (IS_ERR(zone)) {
 			pr_err("Failed to build %pOFn zone %ld\n", child,
 			       PTR_ERR(zone));
diff --git a/drivers/thermal/thermal_sysfs.c b/drivers/thermal/thermal_sysfs.c
index 1c4aac8464a7..5018459e8dd9 100644
--- a/drivers/thermal/thermal_sysfs.c
+++ b/drivers/thermal/thermal_sysfs.c
@@ -416,15 +416,15 @@ static int create_trip_attrs(struct thermal_zone_device *tz, int mask)
 	int indx;
 
 	/* This function works only for zones with at least one trip */
-	if (tz->trips <= 0)
+	if (tz->num_trips <= 0)
 		return -EINVAL;
 
-	tz->trip_type_attrs = kcalloc(tz->trips, sizeof(*tz->trip_type_attrs),
+	tz->trip_type_attrs = kcalloc(tz->num_trips, sizeof(*tz->trip_type_attrs),
 				      GFP_KERNEL);
 	if (!tz->trip_type_attrs)
 		return -ENOMEM;
 
-	tz->trip_temp_attrs = kcalloc(tz->trips, sizeof(*tz->trip_temp_attrs),
+	tz->trip_temp_attrs = kcalloc(tz->num_trips, sizeof(*tz->trip_temp_attrs),
 				      GFP_KERNEL);
 	if (!tz->trip_temp_attrs) {
 		kfree(tz->trip_type_attrs);
@@ -432,7 +432,7 @@ static int create_trip_attrs(struct thermal_zone_device *tz, int mask)
 	}
 
 	if (tz->ops->get_trip_hyst) {
-		tz->trip_hyst_attrs = kcalloc(tz->trips,
+		tz->trip_hyst_attrs = kcalloc(tz->num_trips,
 					      sizeof(*tz->trip_hyst_attrs),
 					      GFP_KERNEL);
 		if (!tz->trip_hyst_attrs) {
@@ -442,7 +442,7 @@ static int create_trip_attrs(struct thermal_zone_device *tz, int mask)
 		}
 	}
 
-	attrs = kcalloc(tz->trips * 3 + 1, sizeof(*attrs), GFP_KERNEL);
+	attrs = kcalloc(tz->num_trips * 3 + 1, sizeof(*attrs), GFP_KERNEL);
 	if (!attrs) {
 		kfree(tz->trip_type_attrs);
 		kfree(tz->trip_temp_attrs);
@@ -451,7 +451,7 @@ static int create_trip_attrs(struct thermal_zone_device *tz, int mask)
 		return -ENOMEM;
 	}
 
-	for (indx = 0; indx < tz->trips; indx++) {
+	for (indx = 0; indx < tz->num_trips; indx++) {
 		/* create trip type attribute */
 		snprintf(tz->trip_type_attrs[indx].name, THERMAL_NAME_LENGTH,
 			 "trip_point_%d_type", indx);
@@ -478,7 +478,7 @@ static int create_trip_attrs(struct thermal_zone_device *tz, int mask)
 			tz->trip_temp_attrs[indx].attr.store =
 							trip_point_temp_store;
 		}
-		attrs[indx + tz->trips] = &tz->trip_temp_attrs[indx].attr.attr;
+		attrs[indx + tz->num_trips] = &tz->trip_temp_attrs[indx].attr.attr;
 
 		/* create Optional trip hyst attribute */
 		if (!tz->ops->get_trip_hyst)
@@ -496,10 +496,10 @@ static int create_trip_attrs(struct thermal_zone_device *tz, int mask)
 			tz->trip_hyst_attrs[indx].attr.store =
 					trip_point_hyst_store;
 		}
-		attrs[indx + tz->trips * 2] =
+		attrs[indx + tz->num_trips * 2] =
 					&tz->trip_hyst_attrs[indx].attr.attr;
 	}
-	attrs[tz->trips * 3] = NULL;
+	attrs[tz->num_trips * 3] = NULL;
 
 	tz->trips_attribute_group.attrs = attrs;
 
@@ -540,7 +540,7 @@ int thermal_zone_create_device_groups(struct thermal_zone_device *tz,
 	for (i = 0; i < size - 2; i++)
 		groups[i] = thermal_zone_attribute_groups[i];
 
-	if (tz->trips) {
+	if (tz->num_trips) {
 		result = create_trip_attrs(tz, mask);
 		if (result) {
 			kfree(groups);
@@ -561,7 +561,7 @@ void thermal_zone_destroy_device_groups(struct thermal_zone_device *tz)
 	if (!tz)
 		return;
 
-	if (tz->trips)
+	if (tz->num_trips)
 		destroy_trip_attrs(tz);
 
 	kfree(tz->device.groups);
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
index ea0603b59309..67050a1a5b07 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -226,7 +226,7 @@ static irqreturn_t ti_bandgap_talert_irq_handler(int irq, void *data)
 		/*
 		 * One TALERT interrupt: Two sources
 		 * If the interrupt is due to t_hot then mask t_hot and
-		 * and unmask t_cold else mask t_cold and unmask t_hot
+		 * unmask t_cold else mask t_cold and unmask t_hot
 		 */
 		if (t_hot) {
 			ctrl &= ~tsr->mask_hot_mask;
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index 365733b428d8..1386c713885d 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -40,8 +40,6 @@ enum thermal_trend {
 	THERMAL_TREND_STABLE, /* temperature is stable */
 	THERMAL_TREND_RAISING, /* temperature is raising */
 	THERMAL_TREND_DROPPING, /* temperature is dropping */
-	THERMAL_TREND_RAISE_FULL, /* apply highest cooling action */
-	THERMAL_TREND_DROP_FULL, /* apply lowest cooling action */
 };
 
 /* Thermal notification reason */
@@ -80,6 +78,18 @@ struct thermal_zone_device_ops {
 	void (*critical)(struct thermal_zone_device *);
 };
 
+/**
+ * struct thermal_trip - representation of a point in temperature domain
+ * @temperature: temperature value in miliCelsius
+ * @hysteresis: relative hysteresis in miliCelsius
+ * @type: trip point type
+ */
+struct thermal_trip {
+	int temperature;
+	int hysteresis;
+	enum thermal_trip_type type;
+};
+
 struct thermal_cooling_device_ops {
 	int (*get_max_state) (struct thermal_cooling_device *, unsigned long *);
 	int (*get_cur_state) (struct thermal_cooling_device *, unsigned long *);
@@ -113,7 +123,8 @@ struct thermal_cooling_device {
  * @trip_hyst_attrs:	attributes for trip points for sysfs: trip hysteresis
  * @mode:		current mode of this thermal zone
  * @devdata:	private pointer for device private data
- * @trips:	number of trip points the thermal zone supports
+ * @trips:	an array of struct thermal_trip
+ * @num_trips:	number of trip points the thermal zone supports
  * @trips_disabled;	bitmap for disabled trips
  * @passive_delay_jiffies: number of jiffies to wait between polls when
  *			performing passive cooling.
@@ -153,7 +164,8 @@ struct thermal_zone_device {
 	struct thermal_attr *trip_hyst_attrs;
 	enum thermal_device_mode mode;
 	void *devdata;
-	int trips;
+	struct thermal_trip *trips;
+	int num_trips;
 	unsigned long trips_disabled;	/* bitmap for disabled trips */
 	unsigned long passive_delay_jiffies;
 	unsigned long polling_delay_jiffies;
@@ -366,8 +378,14 @@ void devm_thermal_zone_of_sensor_unregister(struct device *dev,
 struct thermal_zone_device *thermal_zone_device_register(const char *, int, int,
 		void *, struct thermal_zone_device_ops *,
 		struct thermal_zone_params *, int, int);
+
 void thermal_zone_device_unregister(struct thermal_zone_device *);
 
+struct thermal_zone_device *
+thermal_zone_device_register_with_trips(const char *, struct thermal_trip *, int, int,
+					void *, struct thermal_zone_device_ops *,
+					struct thermal_zone_params *, int, int);
+
 int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int,
 				     struct thermal_cooling_device *,
 				     unsigned long, unsigned long,
diff --git a/include/trace/events/thermal.h b/include/trace/events/thermal.h
index 8a5f04888abd..e58bf3072f32 100644
--- a/include/trace/events/thermal.h
+++ b/include/trace/events/thermal.h
@@ -92,34 +92,22 @@ TRACE_EVENT(thermal_zone_trip,
 );
 
 #ifdef CONFIG_CPU_THERMAL
-TRACE_EVENT(thermal_power_cpu_get_power,
-	TP_PROTO(const struct cpumask *cpus, unsigned long freq, u32 *load,
-		size_t load_len, u32 dynamic_power),
+TRACE_EVENT(thermal_power_cpu_get_power_simple,
+	TP_PROTO(int cpu, u32 power),
 
-	TP_ARGS(cpus, freq, load, load_len, dynamic_power),
+	TP_ARGS(cpu, power),
 
 	TP_STRUCT__entry(
-		__bitmask(cpumask, num_possible_cpus())
-		__field(unsigned long, freq          )
-		__dynamic_array(u32,   load, load_len)
-		__field(size_t,        load_len      )
-		__field(u32,           dynamic_power )
+		__field(int, cpu)
+		__field(u32, power)
 	),
 
 	TP_fast_assign(
-		__assign_bitmask(cpumask, cpumask_bits(cpus),
-				num_possible_cpus());
-		__entry->freq = freq;
-		memcpy(__get_dynamic_array(load), load,
-			load_len * sizeof(*load));
-		__entry->load_len = load_len;
-		__entry->dynamic_power = dynamic_power;
+		__entry->cpu = cpu;
+		__entry->power = power;
 	),
 
-	TP_printk("cpus=%s freq=%lu load={%s} dynamic_power=%d",
-		__get_bitmask(cpumask), __entry->freq,
-		__print_array(__get_dynamic_array(load), __entry->load_len, 4),
-		__entry->dynamic_power)
+	TP_printk("cpu=%d power=%u", __entry->cpu, __entry->power)
 );
 
 TRACE_EVENT(thermal_power_cpu_limit,
diff --git a/tools/thermal/tmon/pid.c b/tools/thermal/tmon/pid.c
index 296f69c00c57..da20088285bd 100644
--- a/tools/thermal/tmon/pid.c
+++ b/tools/thermal/tmon/pid.c
@@ -27,7 +27,7 @@
 
 /**************************************************************************
  * PID (Proportional-Integral-Derivative) controller is commonly used in
- * linear control system, consider the the process.
+ * linear control system, consider the process.
  * G(s) = U(s)/E(s)
  * kp = proportional gain
  * ki = integral gain
diff --git a/tools/thermal/tmon/tmon.h b/tools/thermal/tmon/tmon.h
index c9066ec104dd..44d16d778f04 100644
--- a/tools/thermal/tmon/tmon.h
+++ b/tools/thermal/tmon/tmon.h
@@ -27,6 +27,9 @@
 #define NR_LINES_TZDATA 1
 #define TMON_LOG_FILE "/var/tmp/tmon.log"
 
+#include <sys/time.h>
+#include <pthread.h>
+
 extern unsigned long ticktime;
 extern double time_elapsed;
 extern unsigned long target_temp_user;