summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2020-04-30 10:38:48 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2020-04-30 10:38:48 -0700
commitaf4a32ad21f83a0d093219c411e5a9f5b344e2ae (patch)
tree5d647b784dd137dedb4a11f249ab573862fc4d18
parent1d2cc5ac6f6668cc15216d51051103c61467d7e8 (diff)
parent1a8eb6b373c2af6533c13d1ea11f504e5010ed9a (diff)
Merge tag 'mmc-v5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson: - meson-mx-sdio: Fix support for HW busy detection - sdhci-msm: Fix support for HW busy detection - cqhci: Fix polling loop by converting to readx_poll_timeout() - sdhci-xenon: Fix annoying 1.8V regulator warning - sdhci-pci: Fix eMMC driver strength for BYT-based controllers * tag 'mmc-v5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-pci: Fix eMMC driver strength for BYT-based controllers mmc: sdhci-xenon: fix annoying 1.8V regulator warning mmc: sdhci-msm: Enable host capabilities pertains to R1b response mmc: cqhci: Avoid false "cqhci: CQE stuck on" by not open-coding timeout loop mmc: meson-mx-sdio: remove the broken ->card_busy() op mmc: meson-mx-sdio: Set MMC_CAP_WAIT_WHILE_BUSY mmc: core: make mmc_interrupt_hpi() static
-rw-r--r--drivers/mmc/core/mmc_ops.c2
-rw-r--r--drivers/mmc/host/cqhci.c21
-rw-r--r--drivers/mmc/host/meson-mx-sdio.c11
-rw-r--r--drivers/mmc/host/sdhci-msm.c2
-rw-r--r--drivers/mmc/host/sdhci-pci-core.c3
-rw-r--r--drivers/mmc/host/sdhci-xenon.c10
6 files changed, 27 insertions, 22 deletions
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 5bd0ab8b236a..baa6314f69b4 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -878,7 +878,7 @@ static int mmc_send_hpi_cmd(struct mmc_card *card)
* Issued High Priority Interrupt, and check for card status
* until out-of prg-state.
*/
-int mmc_interrupt_hpi(struct mmc_card *card)
+static int mmc_interrupt_hpi(struct mmc_card *card)
{
int err;
u32 status;
diff --git a/drivers/mmc/host/cqhci.c b/drivers/mmc/host/cqhci.c
index c2239ee2c0ef..75934f3c117e 100644
--- a/drivers/mmc/host/cqhci.c
+++ b/drivers/mmc/host/cqhci.c
@@ -5,6 +5,7 @@
#include <linux/delay.h>
#include <linux/highmem.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
@@ -349,12 +350,16 @@ static int cqhci_enable(struct mmc_host *mmc, struct mmc_card *card)
/* CQHCI is idle and should halt immediately, so set a small timeout */
#define CQHCI_OFF_TIMEOUT 100
+static u32 cqhci_read_ctl(struct cqhci_host *cq_host)
+{
+ return cqhci_readl(cq_host, CQHCI_CTL);
+}
+
static void cqhci_off(struct mmc_host *mmc)
{
struct cqhci_host *cq_host = mmc->cqe_private;
- ktime_t timeout;
- bool timed_out;
u32 reg;
+ int err;
if (!cq_host->enabled || !mmc->cqe_on || cq_host->recovery_halt)
return;
@@ -364,15 +369,9 @@ static void cqhci_off(struct mmc_host *mmc)
cqhci_writel(cq_host, CQHCI_HALT, CQHCI_CTL);
- timeout = ktime_add_us(ktime_get(), CQHCI_OFF_TIMEOUT);
- while (1) {
- timed_out = ktime_compare(ktime_get(), timeout) > 0;
- reg = cqhci_readl(cq_host, CQHCI_CTL);
- if ((reg & CQHCI_HALT) || timed_out)
- break;
- }
-
- if (timed_out)
+ err = readx_poll_timeout(cqhci_read_ctl, cq_host, reg,
+ reg & CQHCI_HALT, 0, CQHCI_OFF_TIMEOUT);
+ if (err < 0)
pr_err("%s: cqhci: CQE stuck on\n", mmc_hostname(mmc));
else
pr_debug("%s: cqhci: CQE off\n", mmc_hostname(mmc));
diff --git a/drivers/mmc/host/meson-mx-sdio.c b/drivers/mmc/host/meson-mx-sdio.c
index 8b038e7b2cd3..2e58743d83bb 100644
--- a/drivers/mmc/host/meson-mx-sdio.c
+++ b/drivers/mmc/host/meson-mx-sdio.c
@@ -357,14 +357,6 @@ static void meson_mx_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
meson_mx_mmc_start_cmd(mmc, mrq->cmd);
}
-static int meson_mx_mmc_card_busy(struct mmc_host *mmc)
-{
- struct meson_mx_mmc_host *host = mmc_priv(mmc);
- u32 irqc = readl(host->base + MESON_MX_SDIO_IRQC);
-
- return !!(irqc & MESON_MX_SDIO_IRQC_FORCE_DATA_DAT_MASK);
-}
-
static void meson_mx_mmc_read_response(struct mmc_host *mmc,
struct mmc_command *cmd)
{
@@ -506,7 +498,6 @@ static void meson_mx_mmc_timeout(struct timer_list *t)
static struct mmc_host_ops meson_mx_mmc_ops = {
.request = meson_mx_mmc_request,
.set_ios = meson_mx_mmc_set_ios,
- .card_busy = meson_mx_mmc_card_busy,
.get_cd = mmc_gpio_get_cd,
.get_ro = mmc_gpio_get_ro,
};
@@ -570,7 +561,7 @@ static int meson_mx_mmc_add_host(struct meson_mx_mmc_host *host)
mmc->f_max = clk_round_rate(host->cfg_div_clk,
clk_get_rate(host->parent_clk));
- mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
+ mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23 | MMC_CAP_WAIT_WHILE_BUSY;
mmc->ops = &meson_mx_mmc_ops;
ret = mmc_of_parse(mmc);
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 09ff7315eb5e..a8bcb3f16aa4 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -2087,6 +2087,8 @@ static int sdhci_msm_probe(struct platform_device *pdev)
goto clk_disable;
}
+ msm_host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_NEED_RSP_BUSY;
+
pm_runtime_get_noresume(&pdev->dev);
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index 525de2454a4d..2527244c2ae1 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -601,6 +601,9 @@ static int intel_select_drive_strength(struct mmc_card *card,
struct sdhci_pci_slot *slot = sdhci_priv(host);
struct intel_host *intel_host = sdhci_pci_priv(slot);
+ if (!(mmc_driver_type_mask(intel_host->drv_strength) & card_drv))
+ return 0;
+
return intel_host->drv_strength;
}
diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
index 1dea1ba66f7b..4703cd540c7f 100644
--- a/drivers/mmc/host/sdhci-xenon.c
+++ b/drivers/mmc/host/sdhci-xenon.c
@@ -235,6 +235,16 @@ static void xenon_voltage_switch(struct sdhci_host *host)
{
/* Wait for 5ms after set 1.8V signal enable bit */
usleep_range(5000, 5500);
+
+ /*
+ * For some reason the controller's Host Control2 register reports
+ * the bit representing 1.8V signaling as 0 when read after it was
+ * written as 1. Subsequent read reports 1.
+ *
+ * Since this may cause some issues, do an empty read of the Host
+ * Control2 register here to circumvent this.
+ */
+ sdhci_readw(host, SDHCI_HOST_CONTROL2);
}
static const struct sdhci_ops sdhci_xenon_ops = {