diff options
author | Lu Baolu <baolu.lu@linux.intel.com> | 2016-01-26 17:50:06 +0200 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2016-02-03 14:01:47 -0800 |
commit | 7e70cbffe236721051bbaff965e477df06dcb190 (patch) | |
tree | 3466842559a275718caff8340cb333753fc35d8e | |
parent | fa89537783cb442263fa5a14df6c7693eaf32f11 (diff) |
usb: xhci: add a quirk bit for ssic port unused
Two workarounds introduced by commit b8cb91e058cd ("xhci: Workaround
for PME stuck issues in Intel xhci") and commit abce329c27b3 ("xhci:
Workaround to get D3 working in Intel xHCI") share a single quirk bit
XHCI_PME_STUCK_QUIRK. These two workarounds actually are different and
might happen on different hardwares. Need to separate them by adding a
quirk bit for the later.
Cc: stable@vger.kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-rw-r--r-- | drivers/usb/host/xhci-pci.c | 79 | ||||
-rw-r--r-- | drivers/usb/host/xhci.h | 1 |
2 files changed, 46 insertions, 34 deletions
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 67471fb28de5..86377a0955e6 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -156,6 +156,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI)) { xhci->quirks |= XHCI_PME_STUCK_QUIRK; } + if (pdev->vendor == PCI_VENDOR_ID_INTEL && + pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) { + xhci->quirks |= XHCI_SSIC_PORT_UNUSED; + } if (pdev->vendor == PCI_VENDOR_ID_ETRON && pdev->device == PCI_DEVICE_ID_EJ168) { xhci->quirks |= XHCI_RESET_ON_RESUME; @@ -314,46 +318,47 @@ static void xhci_pci_remove(struct pci_dev *dev) * SSIC PORT need to be marked as "unused" before putting xHCI * into D3. After D3 exit, the SSIC port need to be marked as "used". * Without this change, xHCI might not enter D3 state. - * Make sure PME works on some Intel xHCI controllers by writing 1 to clear - * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4 */ -static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend) +static void xhci_ssic_port_unused_quirk(struct usb_hcd *hcd, bool suspend) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); - struct pci_dev *pdev = to_pci_dev(hcd->self.controller); u32 val; void __iomem *reg; int i; - if (pdev->vendor == PCI_VENDOR_ID_INTEL && - pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) { - - for (i = 0; i < SSIC_PORT_NUM; i++) { - reg = (void __iomem *) xhci->cap_regs + - SSIC_PORT_CFG2 + - i * SSIC_PORT_CFG2_OFFSET; - - /* - * Notify SSIC that SSIC profile programming - * is not done. - */ - val = readl(reg) & ~PROG_DONE; - writel(val, reg); - - /* Mark SSIC port as unused(suspend) or used(resume) */ - val = readl(reg); - if (suspend) - val |= SSIC_PORT_UNUSED; - else - val &= ~SSIC_PORT_UNUSED; - writel(val, reg); - - /* Notify SSIC that SSIC profile programming is done */ - val = readl(reg) | PROG_DONE; - writel(val, reg); - readl(reg); - } + for (i = 0; i < SSIC_PORT_NUM; i++) { + reg = (void __iomem *) xhci->cap_regs + + SSIC_PORT_CFG2 + + i * SSIC_PORT_CFG2_OFFSET; + + /* Notify SSIC that SSIC profile programming is not done. */ + val = readl(reg) & ~PROG_DONE; + writel(val, reg); + + /* Mark SSIC port as unused(suspend) or used(resume) */ + val = readl(reg); + if (suspend) + val |= SSIC_PORT_UNUSED; + else + val &= ~SSIC_PORT_UNUSED; + writel(val, reg); + + /* Notify SSIC that SSIC profile programming is done */ + val = readl(reg) | PROG_DONE; + writel(val, reg); + readl(reg); } +} + +/* + * Make sure PME works on some Intel xHCI controllers by writing 1 to clear + * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4 + */ +static void xhci_pme_quirk(struct usb_hcd *hcd) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + void __iomem *reg; + u32 val; reg = (void __iomem *) xhci->cap_regs + 0x80a4; val = readl(reg); @@ -374,7 +379,10 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) pdev->no_d3cold = true; if (xhci->quirks & XHCI_PME_STUCK_QUIRK) - xhci_pme_quirk(hcd, true); + xhci_pme_quirk(hcd); + + if (xhci->quirks & XHCI_SSIC_PORT_UNUSED) + xhci_ssic_port_unused_quirk(hcd, true); return xhci_suspend(xhci, do_wakeup); } @@ -406,8 +414,11 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) if (pdev->vendor == PCI_VENDOR_ID_INTEL) usb_enable_intel_xhci_ports(pdev); + if (xhci->quirks & XHCI_SSIC_PORT_UNUSED) + xhci_ssic_port_unused_quirk(hcd, false); + if (xhci->quirks & XHCI_PME_STUCK_QUIRK) - xhci_pme_quirk(hcd, false); + xhci_pme_quirk(hcd); retval = xhci_resume(xhci, hibernated); return retval; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 9be7348872ba..cc651383ce5a 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1631,6 +1631,7 @@ struct xhci_hcd { #define XHCI_BROKEN_STREAMS (1 << 19) #define XHCI_PME_STUCK_QUIRK (1 << 20) #define XHCI_MTK_HOST (1 << 21) +#define XHCI_SSIC_PORT_UNUSED (1 << 22) unsigned int num_active_eps; unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ |