i40e: Introduce recovery mode support

This patch introduces "recovery mode" to the i40e driver. It is
part of a new Any2Any idea of upgrading the firmware. In this
approach, it is required for the driver to have support for
"transition firmware", that is used for migrating from structured
to flat firmware image. In this new, very basic mode, i40e driver
must be able to handle particular IOCTL calls from the NVM Update
Tool and run a small set of AQ commands.

These additional AQ commands are part of the interface used by
the NVMUpdate tool.  The NVMUpdate tool contains all of the
necessary logic to reference these new AQ commands.  The end user
experience remains the same, they are using the NVMUpdate tool to
update the NVM contents.

Signed-off-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: Piotr Marczak <piotr.marczak@intel.com>
Tested-by: Don Buchholz <donald.buchholz@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

3 files changed, 294 insertions, 31 deletions

diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index c4afb852cb57..7ce42040b851 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -149,6 +149,7 @@ enum i40e_state_t {
 	__I40E_CLIENT_L2_CHANGE,
 	__I40E_CLIENT_RESET,
 	__I40E_VIRTCHNL_OP_PENDING,
+	__I40E_RECOVERY_MODE,
 	/* This must be last as it determines the size of the BITMAP */
 	__I40E_STATE_SIZE__,
 };
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 32e137499063..2c81afbd7c58 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -5141,6 +5141,12 @@ static int i40e_get_module_eeprom(struct net_device *netdev,
 	return 0;
 }
 
+static const struct ethtool_ops i40e_ethtool_recovery_mode_ops = {
+	.set_eeprom		= i40e_set_eeprom,
+	.get_eeprom_len		= i40e_get_eeprom_len,
+	.get_eeprom		= i40e_get_eeprom,
+};
+
 static const struct ethtool_ops i40e_ethtool_ops = {
 	.get_drvinfo		= i40e_get_drvinfo,
 	.get_regs_len		= i40e_get_regs_len,
@@ -5189,5 +5195,11 @@ static const struct ethtool_ops i40e_ethtool_ops = {
 
 void i40e_set_ethtool_ops(struct net_device *netdev)
 {
-	netdev->ethtool_ops = &i40e_ethtool_ops;
+	struct i40e_netdev_priv *np = netdev_priv(netdev);
+	struct i40e_pf		*pf = np->vsi->back;
+
+	if (!test_bit(__I40E_RECOVERY_MODE, pf->state))
+		netdev->ethtool_ops = &i40e_ethtool_ops;
+	else
+		netdev->ethtool_ops = &i40e_ethtool_recovery_mode_ops;
 }
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index c2673d2cef8e..fa1b2cfd359e 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -46,6 +46,10 @@ static int i40e_setup_pf_filter_control(struct i40e_pf *pf);
 static void i40e_prep_for_reset(struct i40e_pf *pf, bool lock_acquired);
 static int i40e_reset(struct i40e_pf *pf);
 static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired);
+static int i40e_setup_misc_vector_for_recovery_mode(struct i40e_pf *pf);
+static int i40e_restore_interrupt_scheme(struct i40e_pf *pf);
+static bool i40e_check_recovery_mode(struct i40e_pf *pf);
+static int i40e_init_recovery_mode(struct i40e_pf *pf, struct i40e_hw *hw);
 static void i40e_fdir_sb_setup(struct i40e_pf *pf);
 static int i40e_veb_get_bw_info(struct i40e_veb *veb);
 static int i40e_get_capabilities(struct i40e_pf *pf,
@@ -278,8 +282,9 @@ struct i40e_vsi *i40e_find_vsi_from_id(struct i40e_pf *pf, u16 id)
  **/
 void i40e_service_event_schedule(struct i40e_pf *pf)
 {
-	if (!test_bit(__I40E_DOWN, pf->state) &&
-	    !test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state))
+	if ((!test_bit(__I40E_DOWN, pf->state) &&
+	     !test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state)) ||
+	      test_bit(__I40E_RECOVERY_MODE, pf->state))
 		queue_work(i40e_wq, &pf->service_task);
 }
 
@@ -4019,7 +4024,8 @@ static irqreturn_t i40e_intr(int irq, void *data)
 enable_intr:
 	/* re-enable interrupt causes */
 	wr32(hw, I40E_PFINT_ICR0_ENA, ena_mask);
-	if (!test_bit(__I40E_DOWN, pf->state)) {
+	if (!test_bit(__I40E_DOWN, pf->state) ||
+	    test_bit(__I40E_RECOVERY_MODE, pf->state)) {
 		i40e_service_event_schedule(pf);
 		i40e_irq_dynamic_enable_icr0(pf);
 	}
@@ -9409,6 +9415,7 @@ static int i40e_reset(struct i40e_pf *pf)
  **/
 static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired)
 {
+	int old_recovery_mode_bit = test_bit(__I40E_RECOVERY_MODE, pf->state);
 	struct i40e_vsi *vsi = pf->vsi[pf->lan_vsi];
 	struct i40e_hw *hw = &pf->hw;
 	u8 set_fc_aq_fail = 0;
@@ -9416,7 +9423,14 @@ static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired)
 	u32 val;
 	int v;
 
-	if (test_bit(__I40E_DOWN, pf->state))
+	if (test_bit(__I40E_EMP_RESET_INTR_RECEIVED, pf->state) &&
+	    i40e_check_recovery_mode(pf)) {
+		i40e_set_ethtool_ops(pf->vsi[pf->lan_vsi]->netdev);
+	}
+
+	if (test_bit(__I40E_DOWN, pf->state) &&
+	    !test_bit(__I40E_RECOVERY_MODE, pf->state) &&
+	    !old_recovery_mode_bit)
 		goto clear_recovery;
 	dev_dbg(&pf->pdev->dev, "Rebuilding internal switch\n");
 
@@ -9445,6 +9459,44 @@ static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired)
 	if (test_and_clear_bit(__I40E_EMP_RESET_INTR_RECEIVED, pf->state))
 		i40e_verify_eeprom(pf);
 
+	/* if we are going out of or into recovery mode we have to act
+	 * accordingly with regard to resources initialization
+	 * and deinitialization
+	 */
+	if (test_bit(__I40E_RECOVERY_MODE, pf->state) ||
+	    old_recovery_mode_bit) {
+		if (i40e_get_capabilities(pf,
+					  i40e_aqc_opc_list_func_capabilities))
+			goto end_unlock;
+
+		if (test_bit(__I40E_RECOVERY_MODE, pf->state)) {
+			/* we're staying in recovery mode so we'll reinitialize
+			 * misc vector here
+			 */
+			if (i40e_setup_misc_vector_for_recovery_mode(pf))
+				goto end_unlock;
+		} else {
+			if (!lock_acquired)
+				rtnl_lock();
+			/* we're going out of recovery mode so we'll free
+			 * the IRQ allocated specifically for recovery mode
+			 * and restore the interrupt scheme
+			 */
+			free_irq(pf->pdev->irq, pf);
+			i40e_clear_interrupt_scheme(pf);
+			if (i40e_restore_interrupt_scheme(pf))
+				goto end_unlock;
+		}
+
+		/* tell the firmware that we're starting */
+		i40e_send_version(pf);
+
+		/* bail out in case recovery mode was detected, as there is
+		 * no need for further configuration.
+		 */
+		goto end_unlock;
+	}
+
 	i40e_clear_pxe_mode(hw);
 	ret = i40e_get_capabilities(pf, i40e_aqc_opc_list_func_capabilities);
 	if (ret)
@@ -9896,31 +9948,38 @@ static void i40e_service_task(struct work_struct *work)
 	unsigned long start_time = jiffies;
 
 	/* don't bother with service tasks if a reset is in progress */
-	if (test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state))
+	if (test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state) ||
+	    test_bit(__I40E_SUSPENDED, pf->state))
 		return;
 
 	if (test_and_set_bit(__I40E_SERVICE_SCHED, pf->state))
 		return;
 
-	i40e_detect_recover_hung(pf->vsi[pf->lan_vsi]);
-	i40e_sync_filters_subtask(pf);
-	i40e_reset_subtask(pf);
-	i40e_handle_mdd_event(pf);
-	i40e_vc_process_vflr_event(pf);
-	i40e_watchdog_subtask(pf);
-	i40e_fdir_reinit_subtask(pf);
-	if (test_and_clear_bit(__I40E_CLIENT_RESET, pf->state)) {
-		/* Client subtask will reopen next time through. */
-		i40e_notify_client_of_netdev_close(pf->vsi[pf->lan_vsi], true);
+	if (!test_bit(__I40E_RECOVERY_MODE, pf->state)) {
+		i40e_detect_recover_hung(pf->vsi[pf->lan_vsi]);
+		i40e_sync_filters_subtask(pf);
+		i40e_reset_subtask(pf);
+		i40e_handle_mdd_event(pf);
+		i40e_vc_process_vflr_event(pf);
+		i40e_watchdog_subtask(pf);
+		i40e_fdir_reinit_subtask(pf);
+		if (test_and_clear_bit(__I40E_CLIENT_RESET, pf->state)) {
+			/* Client subtask will reopen next time through. */
+			i40e_notify_client_of_netdev_close(pf->vsi[pf->lan_vsi],
+							   true);
+		} else {
+			i40e_client_subtask(pf);
+			if (test_and_clear_bit(__I40E_CLIENT_L2_CHANGE,
+					       pf->state))
+				i40e_notify_client_of_l2_param_changes(
+								pf->vsi[pf->lan_vsi]);
+		}
+		i40e_sync_filters_subtask(pf);
+		i40e_sync_udp_filters_subtask(pf);
 	} else {
-		i40e_client_subtask(pf);
-		if (test_and_clear_bit(__I40E_CLIENT_L2_CHANGE,
-				       pf->state))
-			i40e_notify_client_of_l2_param_changes(
-							pf->vsi[pf->lan_vsi]);
-	}
-	i40e_sync_filters_subtask(pf);
-	i40e_sync_udp_filters_subtask(pf);
+		i40e_reset_subtask(pf);
+	}
+
 	i40e_clean_adminq_subtask(pf);
 
 	/* flush memory to make sure state is correct before next watchdog */
@@ -10743,6 +10802,48 @@ err_unwind:
 }
 
 /**
+ * i40e_setup_misc_vector_for_recovery_mode - Setup the misc vector to handle
+ * non queue events in recovery mode
+ * @pf: board private structure
+ *
+ * This sets up the handler for MSIX 0 or MSI/legacy, which is used to manage
+ * the non-queue interrupts, e.g. AdminQ and errors in recovery mode.
+ * This is handled differently than in recovery mode since no Tx/Rx resources
+ * are being allocated.
+ **/
+static int i40e_setup_misc_vector_for_recovery_mode(struct i40e_pf *pf)
+{
+	int err;
+
+	if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
+		err = i40e_setup_misc_vector(pf);
+
+		if (err) {
+			dev_info(&pf->pdev->dev,
+				 "MSI-X misc vector request failed, error %d\n",
+				 err);
+			return err;
+		}
+	} else {
+		u32 flags = pf->flags & I40E_FLAG_MSI_ENABLED ? 0 : IRQF_SHARED;
+
+		err = request_irq(pf->pdev->irq, i40e_intr, flags,
+				  pf->int_name, pf);
+
+		if (err) {
+			dev_info(&pf->pdev->dev,
+				 "MSI/legacy misc vector request failed, error %d\n",
+				 err);
+			return err;
+		}
+		i40e_enable_misc_int_causes(pf);
+		i40e_irq_dynamic_enable_icr0(pf);
+	}
+
+	return 0;
+}
+
+/**
  * i40e_setup_misc_vector - Setup the misc vector to handle non queue events
  * @pf: board private structure
  *
@@ -13905,6 +14006,125 @@ void i40e_set_fec_in_flags(u8 fec_cfg, u32 *flags)
 }
 
 /**
+ * i40e_check_recovery_mode - check if we are running transition firmware
+ * @pf: board private structure
+ *
+ * Check registers indicating the firmware runs in recovery mode. Sets the
+ * appropriate driver state.
+ *
+ * Returns true if the recovery mode was detected, false otherwise
+ **/
+static bool i40e_check_recovery_mode(struct i40e_pf *pf)
+{
+	u32 val = rd32(&pf->hw, I40E_GL_FWSTS);
+
+	if (val & I40E_GL_FWSTS_FWS1B_MASK) {
+		dev_notice(&pf->pdev->dev, "Firmware recovery mode detected. Limiting functionality.\n");
+		dev_notice(&pf->pdev->dev, "Refer to the Intel(R) Ethernet Adapters and Devices User Guide for details on firmware recovery mode.\n");
+		set_bit(__I40E_RECOVERY_MODE, pf->state);
+
+		return true;
+	}
+	if (test_and_clear_bit(__I40E_RECOVERY_MODE, pf->state))
+		dev_info(&pf->pdev->dev, "Reinitializing in normal mode with full functionality.\n");
+
+	return false;
+}
+
+/**
+ * i40e_init_recovery_mode - initialize subsystems needed in recovery mode
+ * @pf: board private structure
+ * @hw: ptr to the hardware info
+ *
+ * This function does a minimal setup of all subsystems needed for running
+ * recovery mode.
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int i40e_init_recovery_mode(struct i40e_pf *pf, struct i40e_hw *hw)
+{
+	struct i40e_vsi *vsi;
+	int err;
+	int v_idx;
+
+	pci_save_state(pf->pdev);
+
+	/* set up periodic task facility */
+	timer_setup(&pf->service_timer, i40e_service_timer, 0);
+	pf->service_timer_period = HZ;
+
+	INIT_WORK(&pf->service_task, i40e_service_task);
+	clear_bit(__I40E_SERVICE_SCHED, pf->state);
+
+	err = i40e_init_interrupt_scheme(pf);
+	if (err)
+		goto err_switch_setup;
+
+	/* The number of VSIs reported by the FW is the minimum guaranteed
+	 * to us; HW supports far more and we share the remaining pool with
+	 * the other PFs. We allocate space for more than the guarantee with
+	 * the understanding that we might not get them all later.
+	 */
+	if (pf->hw.func_caps.num_vsis < I40E_MIN_VSI_ALLOC)
+		pf->num_alloc_vsi = I40E_MIN_VSI_ALLOC;
+	else
+		pf->num_alloc_vsi = pf->hw.func_caps.num_vsis;
+
+	/* Set up the vsi struct and our local tracking of the MAIN PF vsi. */
+	pf->vsi = kcalloc(pf->num_alloc_vsi, sizeof(struct i40e_vsi *),
+			  GFP_KERNEL);
+	if (!pf->vsi) {
+		err = -ENOMEM;
+		goto err_switch_setup;
+	}
+
+	/* We allocate one VSI which is needed as absolute minimum
+	 * in order to register the netdev
+	 */
+	v_idx = i40e_vsi_mem_alloc(pf, I40E_VSI_MAIN);
+	if (v_idx < 0)
+		goto err_switch_setup;
+	pf->lan_vsi = v_idx;
+	vsi = pf->vsi[v_idx];
+	if (!vsi)
+		goto err_switch_setup;
+	vsi->alloc_queue_pairs = 1;
+	err = i40e_config_netdev(vsi);
+	if (err)
+		goto err_switch_setup;
+	err = register_netdev(vsi->netdev);
+	if (err)
+		goto err_switch_setup;
+	vsi->netdev_registered = true;
+	i40e_dbg_pf_init(pf);
+
+	err = i40e_setup_misc_vector_for_recovery_mode(pf);
+	if (err)
+		goto err_switch_setup;
+
+	/* tell the firmware that we're starting */
+	i40e_send_version(pf);
+
+	/* since everything's happy, start the service_task timer */
+	mod_timer(&pf->service_timer,
+		  round_jiffies(jiffies + pf->service_timer_period));
+
+	return 0;
+
+err_switch_setup:
+	i40e_reset_interrupt_capability(pf);
+	del_timer_sync(&pf->service_timer);
+	i40e_shutdown_adminq(hw);
+	iounmap(hw->hw_addr);
+	pci_disable_pcie_error_reporting(pf->pdev);
+	pci_release_mem_regions(pf->pdev);
+	pci_disable_device(pf->pdev);
+	kfree(pf);
+
+	return err;
+}
+
+/**
  * i40e_probe - Device initialization routine
  * @pdev: PCI device information struct
  * @ent: entry in i40e_pci_tbl
@@ -14029,13 +14249,14 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	/* Reset here to make sure all is clean and to define PF 'n' */
 	i40e_clear_hw(hw);
-	err = i40e_pf_reset(hw);
-	if (err) {
-		dev_info(&pdev->dev, "Initial pf_reset failed: %d\n", err);
-		goto err_pf_reset;
+	if (!i40e_check_recovery_mode(pf)) {
+		err = i40e_pf_reset(hw);
+		if (err) {
+			dev_info(&pdev->dev, "Initial pf_reset failed: %d\n", err);
+			goto err_pf_reset;
+		}
+		pf->pfr_count++;
 	}
-	pf->pfr_count++;
-
 	hw->aq.num_arq_entries = I40E_AQ_LEN;
 	hw->aq.num_asq_entries = I40E_AQ_LEN;
 	hw->aq.arq_buf_size = I40E_MAX_AQ_BUF_SIZE;
@@ -14103,6 +14324,7 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		dev_warn(&pdev->dev, "This device is a pre-production adapter/LOM. Please be aware there may be issues with your hardware. If you are experiencing problems please contact your Intel or hardware representative who provided you with this hardware.\n");
 
 	i40e_clear_pxe_mode(hw);
+
 	err = i40e_get_capabilities(pf, i40e_aqc_opc_list_func_capabilities);
 	if (err)
 		goto err_adminq_setup;
@@ -14113,6 +14335,9 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_sw_init;
 	}
 
+	if (test_bit(__I40E_RECOVERY_MODE, pf->state))
+		return i40e_init_recovery_mode(pf, hw);
+
 	err = i40e_init_lan_hmc(hw, hw->func_caps.num_tx_qp,
 				hw->func_caps.num_rx_qp, 0, 0);
 	if (err) {
@@ -14498,6 +14723,19 @@ static void i40e_remove(struct pci_dev *pdev)
 	if (pf->service_task.func)
 		cancel_work_sync(&pf->service_task);
 
+	if (test_bit(__I40E_RECOVERY_MODE, pf->state)) {
+		struct i40e_vsi *vsi = pf->vsi[0];
+
+		/* We know that we have allocated only one vsi for this PF,
+		 * it was just for registering netdevice, so the interface
+		 * could be visible in the 'ifconfig' output
+		 */
+		unregister_netdev(vsi->netdev);
+		free_netdev(vsi->netdev);
+
+		goto unmap;
+	}
+
 	/* Client close must be called explicitly here because the timer
 	 * has been stopped.
 	 */
@@ -14547,6 +14785,12 @@ static void i40e_remove(struct pci_dev *pdev)
 				 ret_code);
 	}
 
+unmap:
+	/* Free MSI/legacy interrupt 0 when in recovery mode. */
+	if (test_bit(__I40E_RECOVERY_MODE, pf->state) &&
+	    !(pf->flags & I40E_FLAG_MSIX_ENABLED))
+		free_irq(pf->pdev->irq, pf);
+
 	/* shutdown the adminq */
 	i40e_shutdown_adminq(hw);
 
@@ -14559,7 +14803,8 @@ static void i40e_remove(struct pci_dev *pdev)
 	i40e_clear_interrupt_scheme(pf);
 	for (i = 0; i < pf->num_alloc_vsi; i++) {
 		if (pf->vsi[i]) {
-			i40e_vsi_clear_rings(pf->vsi[i]);
+			if (!test_bit(__I40E_RECOVERY_MODE, pf->state))
+				i40e_vsi_clear_rings(pf->vsi[i]);
 			i40e_vsi_clear(pf->vsi[i]);
 			pf->vsi[i] = NULL;
 		}
@@ -14767,6 +15012,11 @@ static void i40e_shutdown(struct pci_dev *pdev)
 	wr32(hw, I40E_PFPM_WUFC,
 	     (pf->wol_en ? I40E_PFPM_WUFC_MAG_MASK : 0));
 
+	/* Free MSI/legacy interrupt 0 when in recovery mode. */
+	if (test_bit(__I40E_RECOVERY_MODE, pf->state) &&
+	    !(pf->flags & I40E_FLAG_MSIX_ENABLED))
+		free_irq(pf->pdev->irq, pf);
+
 	/* Since we're going to destroy queues during the
 	 * i40e_clear_interrupt_scheme() we should hold the RTNL lock for this
 	 * whole section