diff options
| author | Arnd Bergmann <arnd@arndb.de> | 2023-08-17 14:18:57 +0200 |
|---|---|---|
| committer | Arnd Bergmann <arnd@arndb.de> | 2023-08-17 14:38:39 +0200 |
| commit | 17fd01a243b4a45239e0e325ff18dd46b33a7661 (patch) | |
| tree | 950a81219a87903d94e2ac9ca73327d267712fcc | |
| parent | e7c12167a2948f4b638785e236a29e76208f8e83 (diff) | |
| parent | 7aff940ec88658f7fd21137cf515956a7deaaf54 (diff) | |
Merge tag 'omap-for-v6.5/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps
A fix external abort on non-linefetch for am335x that is fixed with a flush
of posted write. And two networking fixes for beaglebone mostly for revision
c3 to do phy reset with a gpio and to fix a boot time warning.
* tag 'omap-for-v6.5/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-bone-common: Add vcc-supply for on-board eeprom
ARM: dts: am335x-bone-common: Add GPIO PHY reset on revision C3 board
bus: ti-sysc: Flush posted write on enable before reset
Link: https://lore.kernel.org/r/pull-1692158536-457318@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| -rw-r--r-- | arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi | 9 | ||||
| -rw-r--r-- | drivers/bus/ti-sysc.c | 2 |
2 files changed, 11 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi b/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi index b958607c71dc..96451c8a815c 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi @@ -145,6 +145,8 @@ /* MDIO */ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) + /* Added to support GPIO controlled PHY reset */ + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE7) >; }; @@ -153,6 +155,8 @@ /* MDIO reset value */ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7) + /* Added to support GPIO controlled PHY reset */ + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; @@ -215,6 +219,7 @@ baseboard_eeprom: baseboard_eeprom@50 { compatible = "atmel,24c256"; reg = <0x50>; + vcc-supply = <&ldo4_reg>; #address-cells = <1>; #size-cells = <1>; @@ -377,6 +382,10 @@ ethphy0: ethernet-phy@0 { reg = <0>; + /* Support GPIO reset on revision C3 boards */ + reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + reset-assert-us = <300>; + reset-deassert-us = <6500>; }; }; diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index 21fe9854703f..4cb23b9e06ea 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -2142,6 +2142,8 @@ static int sysc_reset(struct sysc *ddata) sysc_val = sysc_read_sysconfig(ddata); sysc_val |= sysc_mask; sysc_write(ddata, sysc_offset, sysc_val); + /* Flush posted write */ + sysc_val = sysc_read_sysconfig(ddata); } if (ddata->cfg.srst_udelay) |