Merge tag 'arm-soc-fixes-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Olof Johansson:
 "A set of fixes that have been coming in over the last few weeks, the
  usual mix of fixes:

   - DT fixups for TI K3

   - SATA drive detection fix for TI DRA7

   - Power management fixes and a few build warning removals for OMAP

   - OP-TEE fix to use standard API for UUID exporting

   - DT fixes for a handful of i.MX boards

  And a few other smaller items"

* tag 'arm-soc-fixes-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
  arm64: meson: select COMMON_CLK
  soc: amlogic: meson-clk-measure: remove redundant dev_err call in meson_msr_probe()
  ARM: OMAP1: ams-delta: remove unused function ams_delta_camera_power
  bus: ti-sysc: Fix flakey idling of uarts and stop using swsup_sidle_act
  ARM: dts: imx: emcon-avari: Fix nxp,pca8574 #gpio-cells
  ARM: dts: imx7d-pico: Fix the 'tuning-step' property
  ARM: dts: imx7d-meerkat96: Fix the 'tuning-step' property
  arm64: dts: freescale: sl28: var1: fix RGMII clock and voltage
  arm64: dts: freescale: sl28: var4: fix RGMII clock and voltage
  ARM: imx: pm-imx27: Include "common.h"
  arm64: dts: zii-ultra: fix 12V_MAIN voltage
  arm64: dts: zii-ultra: remove second GEN_3V3 regulator instance
  arm64: dts: ls1028a: fix memory node
  bus: ti-sysc: Fix am335x resume hang for usb otg module
  ARM: OMAP2+: Fix build warning when mmc_omap is not built
  ARM: OMAP1: isp1301-omap: Add missing gpiod_add_lookup_table function
  ARM: OMAP1: Fix use of possibly uninitialized irq variable
  optee: use export_uuid() to copy client UUID
  arm64: dts: ti: k3*: Introduce reg definition for interrupt routers
  arm64: dts: ti: k3-am65|j721e|am64: Map the dma / navigator subsystem via explicit ranges
  ...

31 files changed, 160 insertions, 126 deletions

diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index 7d2c72562c73..9148a01ed6d9 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -105,9 +105,13 @@
 	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 	phy-reset-duration = <20>;
 	phy-supply = <&sw2_reg>;
-	phy-handle = <&ethphy0>;
 	status = "okay";
 
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
 	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
index 236fc205c389..d0768ae429fa 100644
--- a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
@@ -406,6 +406,18 @@
 	vin-supply = <&sw1_reg>;
 };
 
+&reg_pu {
+	vin-supply = <&sw1_reg>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&sw2_reg>;
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
diff --git a/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi b/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
index 828cf3e39784..c4e146f3341b 100644
--- a/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
@@ -126,7 +126,7 @@
 		compatible = "nxp,pca8574";
 		reg = <0x3a>;
 		gpio-controller;
-		#gpio-cells = <1>;
+		#gpio-cells = <2>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx7d-meerkat96.dts b/arch/arm/boot/dts/imx7d-meerkat96.dts
index 5339210b63d0..dd8003bd1fc0 100644
--- a/arch/arm/boot/dts/imx7d-meerkat96.dts
+++ b/arch/arm/boot/dts/imx7d-meerkat96.dts
@@ -193,7 +193,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	keep-power-in-suspend;
-	tuning-step = <2>;
+	fsl,tuning-step = <2>;
 	vmmc-supply = <&reg_3p3v>;
 	no-1-8-v;
 	broken-cd;
diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi
index e57da0d32b98..e519897fae08 100644
--- a/arch/arm/boot/dts/imx7d-pico.dtsi
+++ b/arch/arm/boot/dts/imx7d-pico.dtsi
@@ -351,7 +351,7 @@
 	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
 	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
-	tuning-step = <2>;
+	fsl,tuning-step = <2>;
 	vmmc-supply = <&reg_3p3v>;
 	wakeup-source;
 	no-1-8-v;
diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c
index 020e6deb67c8..237e8aa9fe83 100644
--- a/arch/arm/mach-imx/pm-imx27.c
+++ b/arch/arm/mach-imx/pm-imx27.c
@@ -12,6 +12,7 @@
 #include <linux/suspend.h>
 #include <linux/io.h>
 
+#include "common.h"
 #include "hardware.h"
 
 static int mx27_suspend_enter(suspend_state_t state)
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 2ee527c00284..1026a816dcc0 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -458,20 +458,6 @@ static struct gpiod_lookup_table leds_gpio_table = {
 
 #ifdef CONFIG_LEDS_TRIGGERS
 DEFINE_LED_TRIGGER(ams_delta_camera_led_trigger);
-
-static int ams_delta_camera_power(struct device *dev, int power)
-{
-	/*
-	 * turn on camera LED
-	 */
-	if (power)
-		led_trigger_event(ams_delta_camera_led_trigger, LED_FULL);
-	else
-		led_trigger_event(ams_delta_camera_led_trigger, LED_OFF);
-	return 0;
-}
-#else
-#define ams_delta_camera_power	NULL
 #endif
 
 static struct platform_device ams_delta_audio_device = {
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index c40cf5ef8607..977b0b744c22 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -320,7 +320,7 @@ static int tps_setup(struct i2c_client *client, void *context)
 {
 	if (!IS_BUILTIN(CONFIG_TPS65010))
 		return -ENOSYS;
-	
+
 	tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V |
 				TPS_LDO1_ENABLE | TPS_VLDO1_3_0V);
 
@@ -394,6 +394,8 @@ static void __init h2_init(void)
 	BUG_ON(gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0);
 	gpio_direction_input(H2_NAND_RB_GPIO_PIN);
 
+	gpiod_add_lookup_table(&isp1301_gpiod_table);
+
 	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
 	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
 
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 2c1e2b32b9b3..a745d64d4699 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -655,9 +655,13 @@ static int __init omap_pm_init(void)
 		irq = INT_7XX_WAKE_UP_REQ;
 	else if (cpu_is_omap16xx())
 		irq = INT_1610_WAKE_UP_REQ;
-	if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup",
-			NULL))
-		pr_err("Failed to request irq %d (peripheral wakeup)\n", irq);
+	else
+		irq = -1;
+
+	if (irq >= 0) {
+		if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup", NULL))
+			pr_err("Failed to request irq %d (peripheral wakeup)\n", irq);
+	}
 
 	/* Program new power ramp-up time
 	 * (0 for most boards since we don't lower voltage when in deep sleep)
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 418a61ecb827..5e86145db0e2 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -322,6 +322,7 @@ static int n8x0_mmc_get_cover_state(struct device *dev, int slot)
 
 static void n8x0_mmc_callback(void *data, u8 card_mask)
 {
+#ifdef CONFIG_MMC_OMAP
 	int bit, *openp, index;
 
 	if (board_is_n800()) {
@@ -339,7 +340,6 @@ static void n8x0_mmc_callback(void *data, u8 card_mask)
 	else
 		*openp = 0;
 
-#ifdef CONFIG_MMC_OMAP
 	omap_mmc_notify_cover_event(mmc_device, index, *openp);
 #else
 	pr_warn("MMC: notify cover event not available\n");
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 6409b47b73e4..7336c1fd0dda 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -165,6 +165,7 @@ config ARCH_MEDIATEK
 
 config ARCH_MESON
 	bool "Amlogic Platforms"
+	select COMMON_CLK
 	select MESON_IRQ_GPIO
 	help
 	  This enables support for the arm64 based Amlogic SoCs
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
index 6c309b97587d..e8d31279b7a3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
@@ -46,7 +46,8 @@
 			eee-broken-100tx;
 			qca,clk-out-frequency = <125000000>;
 			qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
-			vddio-supply = <&vddh>;
+			qca,keep-pll-enabled;
+			vddio-supply = <&vddio>;
 
 			vddio: vddio-regulator {
 				regulator-name = "VDDIO";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
index df212ed5bb94..e65d1c477e2c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
@@ -31,11 +31,10 @@
 			reg = <0x4>;
 			eee-broken-1000t;
 			eee-broken-100tx;
-
 			qca,clk-out-frequency = <125000000>;
 			qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
-
-			vddio-supply = <&vddh>;
+			qca,keep-pll-enabled;
+			vddio-supply = <&vddio>;
 
 			vddio: vddio-regulator {
 				regulator-name = "VDDIO";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index eca06a0c3cf8..a30249ebffa8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -197,8 +197,8 @@
 		ddr: memory-controller@1080000 {
 			compatible = "fsl,qoriq-memory-controller";
 			reg = <0x0 0x1080000 0x0 0x1000>;
-			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
-			big-endian;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
 		};
 
 		dcfg: syscon@1e00000 {
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts
index 631e01c1b9fd..be1e7d6f0ecb 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts
@@ -88,11 +88,11 @@
 		pinctrl-0 = <&pinctrl_codec2>;
 		reg = <0x18>;
 		#sound-dai-cells = <0>;
-		HPVDD-supply = <&reg_3p3v>;
-		SPRVDD-supply = <&reg_3p3v>;
-		SPLVDD-supply = <&reg_3p3v>;
-		AVDD-supply = <&reg_3p3v>;
-		IOVDD-supply = <&reg_3p3v>;
+		HPVDD-supply = <&reg_gen_3p3>;
+		SPRVDD-supply = <&reg_gen_3p3>;
+		SPLVDD-supply = <&reg_gen_3p3>;
+		AVDD-supply = <&reg_gen_3p3>;
+		IOVDD-supply = <&reg_gen_3p3>;
 		DVDD-supply = <&vgen4_reg>;
 		reset-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
index 4dc8383478ee..a08a568c31d9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
@@ -45,8 +45,8 @@
 	reg_12p0_main: regulator-12p0-main {
 		compatible = "regulator-fixed";
 		regulator-name = "12V_MAIN";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
 		regulator-always-on;
 	};
 
@@ -77,15 +77,6 @@
 		regulator-always-on;
 	};
 
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		vin-supply = <&reg_3p3_main>;
-		regulator-name = "GEN_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
 	reg_usdhc2_vmmc: regulator-vsd-3v3 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_reg_usdhc2>;
@@ -415,11 +406,11 @@
 		pinctrl-0 = <&pinctrl_codec1>;
 		reg = <0x18>;
 		#sound-dai-cells = <0>;
-		HPVDD-supply = <&reg_3p3v>;
-		SPRVDD-supply = <&reg_3p3v>;
-		SPLVDD-supply = <&reg_3p3v>;
-		AVDD-supply = <&reg_3p3v>;
-		IOVDD-supply = <&reg_3p3v>;
+		HPVDD-supply = <&reg_gen_3p3>;
+		SPRVDD-supply = <&reg_gen_3p3>;
+		SPLVDD-supply = <&reg_gen_3p3>;
+		AVDD-supply = <&reg_gen_3p3>;
+		IOVDD-supply = <&reg_gen_3p3>;
 		DVDD-supply = <&vgen4_reg>;
 		reset-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>;
 	};
diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index b2bcbf23eefd..ca59d1f711f8 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -42,12 +42,12 @@
 		};
 	};
 
-	dmss: dmss {
+	dmss: bus@48000000 {
 		compatible = "simple-mfd";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		dma-ranges;
-		ranges;
+		ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>;
 
 		ti,sci-dev-id = <25>;
 
@@ -134,7 +134,7 @@
 		};
 	};
 
-	dmsc: dmsc@44043000 {
+	dmsc: system-controller@44043000 {
 		compatible = "ti,k2g-sci";
 		ti,host-id = <12>;
 		mbox-names = "rx", "tx";
@@ -148,7 +148,7 @@
 			#power-domain-cells = <2>;
 		};
 
-		k3_clks: clocks {
+		k3_clks: clock-controller {
 			compatible = "ti,k2g-sci-clk";
 			#clock-cells = <2>;
 		};
@@ -373,8 +373,9 @@
 		clocks = <&k3_clks 145 0>;
 	};
 
-	main_gpio_intr: interrupt-controller0 {
+	main_gpio_intr: interrupt-controller@a00000 {
 		compatible = "ti,sci-intr";
+		reg = <0x00 0x00a00000 0x00 0x800>;
 		ti,intr-trigger-type = <1>;
 		interrupt-controller;
 		interrupt-parent = <&gic500>;
diff --git a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
index 99e94dee1bd4..deb19ae5e168 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
@@ -74,8 +74,9 @@
 		clocks = <&k3_clks 148 0>;
 	};
 
-	mcu_gpio_intr: interrupt-controller1 {
+	mcu_gpio_intr: interrupt-controller@4210000 {
 		compatible = "ti,sci-intr";
+		reg = <0x00 0x04210000 0x00 0x200>;
 		ti,intr-trigger-type = <1>;
 		interrupt-controller;
 		interrupt-parent = <&gic500>;
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index cb340d1b401f..6cd3131eb9ff 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -433,8 +433,9 @@
 		#phy-cells = <0>;
 	};
 
-	intr_main_gpio: interrupt-controller0 {
+	intr_main_gpio: interrupt-controller@a00000 {
 		compatible = "ti,sci-intr";
+		reg = <0x0 0x00a00000 0x0 0x400>;
 		ti,intr-trigger-type = <1>;
 		interrupt-controller;
 		interrupt-parent = <&gic500>;
@@ -444,18 +445,19 @@
 		ti,interrupt-ranges = <0 392 32>;
 	};
 
-	main-navss {
+	main_navss: bus@30800000 {
 		compatible = "simple-mfd";
 		#address-cells = <2>;
 		#size-cells = <2>;
-		ranges;
+		ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0xbc00000>;
 		dma-coherent;
 		dma-ranges;
 
 		ti,sci-dev-id = <118>;
 
-		intr_main_navss: interrupt-controller1 {
+		intr_main_navss: interrupt-controller@310e0000 {
 			compatible = "ti,sci-intr";
+			reg = <0x0 0x310e0000 0x0 0x2000>;
 			ti,intr-trigger-type = <4>;
 			interrupt-controller;
 			interrupt-parent = <&gic500>;
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index 0388c02c2203..f5b8ef2f5f77 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -116,11 +116,11 @@
 		};
 	};
 
-	mcu-navss {
+	mcu_navss: bus@28380000 {
 		compatible = "simple-mfd";
 		#address-cells = <2>;
 		#size-cells = <2>;
-		ranges;
+		ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
 		dma-coherent;
 		dma-ranges;
 
diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
index ed42f13e7663..7cb864b4d74a 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
@@ -6,24 +6,24 @@
  */
 
 &cbass_wakeup {
-	dmsc: dmsc {
+	dmsc: system-controller@44083000 {
 		compatible = "ti,am654-sci";
 		ti,host-id = <12>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
 
 		mbox-names = "rx", "tx";
 
 		mboxes= <&secure_proxy_main 11>,
 			<&secure_proxy_main 13>;
 
+		reg-names = "debug_messages";
+		reg = <0x44083000 0x1000>;
+
 		k3_pds: power-controller {
 			compatible = "ti,sci-pm-domain";
 			#power-domain-cells = <2>;
 		};
 
-		k3_clks: clocks {
+		k3_clks: clock-controller {
 			compatible = "ti,k2g-sci-clk";
 			#clock-cells = <2>;
 		};
@@ -69,8 +69,9 @@
 		power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>;
 	};
 
-	intr_wkup_gpio: interrupt-controller2 {
+	intr_wkup_gpio: interrupt-controller@42200000 {
 		compatible = "ti,sci-intr";
+		reg = <0x42200000 0x200>;
 		ti,intr-trigger-type = <1>;
 		interrupt-controller;
 		interrupt-parent = <&gic500>;
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 9e87fb313a54..eddb2ffb93ca 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -85,12 +85,6 @@
 			gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>;
 		};
 	};
-
-	clk_ov5640_fixed: clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-	};
 };
 
 &wkup_pmx0 {
@@ -287,23 +281,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
 	clock-frequency = <400000>;
-
-	ov5640: camera@3c {
-		compatible = "ovti,ov5640";
-		reg = <0x3c>;
-
-		clocks = <&clk_ov5640_fixed>;
-		clock-names = "xclk";
-
-		port {
-			csi2_cam0: endpoint {
-				remote-endpoint = <&csi2_phy0>;
-				clock-lanes = <0>;
-				data-lanes = <1 2>;
-			};
-		};
-	};
-
 };
 
 &main_i2c2 {
@@ -496,14 +473,6 @@
 	};
 };
 
-&csi2_0 {
-	csi2_phy0: endpoint {
-		remote-endpoint = <&csi2_cam0>;
-		clock-lanes = <0>;
-		data-lanes = <1 2>;
-	};
-};
-
 &mcu_cpsw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index f86c493a44f1..19fea8adbcff 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -68,8 +68,9 @@
 		};
 	};
 
-	main_gpio_intr: interrupt-controller0 {
+	main_gpio_intr: interrupt-controller@a00000 {
 		compatible = "ti,sci-intr";
+		reg = <0x00 0x00a00000 0x00 0x800>;
 		ti,intr-trigger-type = <1>;
 		interrupt-controller;
 		interrupt-parent = <&gic500>;
@@ -85,9 +86,12 @@
 		#size-cells = <2>;
 		ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
 		ti,sci-dev-id = <199>;
+		dma-coherent;
+		dma-ranges;
 
-		main_navss_intr: interrupt-controller1 {
+		main_navss_intr: interrupt-controller@310e0000 {
 			compatible = "ti,sci-intr";
+			reg = <0x00 0x310e0000 0x00 0x4000>;
 			ti,intr-trigger-type = <4>;
 			interrupt-controller;
 			interrupt-parent = <&gic500>;
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 5e74e43822c3..5663fe3ea466 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -6,7 +6,7 @@
  */
 
 &cbass_mcu_wakeup {
-	dmsc: dmsc@44083000 {
+	dmsc: system-controller@44083000 {
 		compatible = "ti,k2g-sci";
 		ti,host-id = <12>;
 
@@ -23,7 +23,7 @@
 			#power-domain-cells = <2>;
 		};
 
-		k3_clks: clocks {
+		k3_clks: clock-controller {
 			compatible = "ti,k2g-sci-clk";
 			#clock-cells = <2>;
 		};
@@ -96,8 +96,9 @@
 		clock-names = "fclk";
 	};
 
-	wkup_gpio_intr: interrupt-controller2 {
+	wkup_gpio_intr: interrupt-controller@42200000 {
 		compatible = "ti,sci-intr";
+		reg = <0x00 0x42200000 0x00 0x400>;
 		ti,intr-trigger-type = <1>;
 		interrupt-controller;
 		interrupt-parent = <&gic500>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index c2aa45a3ac79..3bcafe4c1742 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -76,8 +76,9 @@
 		};
 	};
 
-	main_gpio_intr: interrupt-controller0 {
+	main_gpio_intr: interrupt-controller@a00000 {
 		compatible = "ti,sci-intr";
+		reg = <0x00 0x00a00000 0x00 0x800>;
 		ti,intr-trigger-type = <1>;
 		interrupt-controller;
 		interrupt-parent = <&gic500>;
@@ -87,18 +88,19 @@
 		ti,interrupt-ranges = <8 392 56>;
 	};
 
-	main-navss {
+	main_navss: bus@30000000 {
 		compatible = "simple-mfd";
 		#address-cells = <2>;
 		#size-cells = <2>;
-		ranges;
+		ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
 		dma-coherent;
 		dma-ranges;
 
 		ti,sci-dev-id = <199>;
 
-		main_navss_intr: interrupt-controller1 {
+		main_navss_intr: interrupt-controller@310e0000 {
 			compatible = "ti,sci-intr";
+			reg = <0x0 0x310e0000 0x0 0x4000>;
 			ti,intr-trigger-type = <4>;
 			interrupt-controller;
 			interrupt-parent = <&gic500>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index d56e3475aee7..5e825e4d0306 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -6,7 +6,7 @@
  */
 
 &cbass_mcu_wakeup {
-	dmsc: dmsc@44083000 {
+	dmsc: system-controller@44083000 {
 		compatible = "ti,k2g-sci";
 		ti,host-id = <12>;
 
@@ -23,7 +23,7 @@
 			#power-domain-cells = <2>;
 		};
 
-		k3_clks: clocks {
+		k3_clks: clock-controller {
 			compatible = "ti,k2g-sci-clk";
 			#clock-cells = <2>;
 		};
@@ -96,8 +96,9 @@
 		clock-names = "fclk";
 	};
 
-	wkup_gpio_intr: interrupt-controller2 {
+	wkup_gpio_intr: interrupt-controller@42200000 {
 		compatible = "ti,sci-intr";
+		reg = <0x00 0x42200000 0x00 0x400>;
 		ti,intr-trigger-type = <1>;
 		interrupt-controller;
 		interrupt-parent = <&gic500>;
@@ -249,11 +250,11 @@
 		};
 	};
 
-	mcu-navss {
+	mcu_navss: bus@28380000 {
 		compatible = "simple-mfd";
 		#address-cells = <2>;
 		#size-cells = <2>;
-		ranges;
+		ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
 		dma-coherent;
 		dma-ranges;
 
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index 5fae60f8c135..38cb116ed433 100644
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -1334,6 +1334,34 @@ err_allow_idle:
 	return error;
 }
 
+static int sysc_reinit_module(struct sysc *ddata, bool leave_enabled)
+{
+	struct device *dev = ddata->dev;
+	int error;
+
+	/* Disable target module if it is enabled */
+	if (ddata->enabled) {
+		error = sysc_runtime_suspend(dev);
+		if (error)
+			dev_warn(dev, "reinit suspend failed: %i\n", error);
+	}
+
+	/* Enable target module */
+	error = sysc_runtime_resume(dev);
+	if (error)
+		dev_warn(dev, "reinit resume failed: %i\n", error);
+
+	if (leave_enabled)
+		return error;
+
+	/* Disable target module if no leave_enabled was set */
+	error = sysc_runtime_suspend(dev);
+	if (error)
+		dev_warn(dev, "reinit suspend failed: %i\n", error);
+
+	return error;
+}
+
 static int __maybe_unused sysc_noirq_suspend(struct device *dev)
 {
 	struct sysc *ddata;
@@ -1344,12 +1372,18 @@ static int __maybe_unused sysc_noirq_suspend(struct device *dev)
 	    (SYSC_QUIRK_LEGACY_IDLE | SYSC_QUIRK_NO_IDLE))
 		return 0;
 
-	return pm_runtime_force_suspend(dev);
+	if (!ddata->enabled)
+		return 0;
+
+	ddata->needs_resume = 1;
+
+	return sysc_runtime_suspend(dev);
 }
 
 static int __maybe_unused sysc_noirq_resume(struct device *dev)
 {
 	struct sysc *ddata;
+	int error = 0;
 
 	ddata = dev_get_drvdata(dev);
 
@@ -1357,7 +1391,19 @@ static int __maybe_unused sysc_noirq_resume(struct device *dev)
 	    (SYSC_QUIRK_LEGACY_IDLE | SYSC_QUIRK_NO_IDLE))
 		return 0;
 
-	return pm_runtime_force_resume(dev);
+	if (ddata->cfg.quirks & SYSC_QUIRK_REINIT_ON_RESUME) {
+		error = sysc_reinit_module(ddata, ddata->needs_resume);
+		if (error)
+			dev_warn(dev, "noirq_resume failed: %i\n", error);
+	} else if (ddata->needs_resume) {
+		error = sysc_runtime_resume(dev);
+		if (error)
+			dev_warn(dev, "noirq_resume failed: %i\n", error);
+	}
+
+	ddata->needs_resume = 0;
+
+	return error;
 }
 
 static const struct dev_pm_ops sysc_pm_ops = {
@@ -1408,9 +1454,9 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 		   SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
 	/* Uarts on omap4 and later */
 	SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x50411e03, 0xffff00ff,
-		   SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE),
+		   SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
 	SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47422e03, 0xffffffff,
-		   SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE),
+		   SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
 
 	/* Quirks that need to be set based on the module address */
 	SYSC_QUIRK("mcpdm", 0x40132000, 0, 0x10, -ENODEV, 0x50000800, 0xffffffff,
@@ -1459,6 +1505,8 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 		   SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY),
 	SYSC_QUIRK("tptc", 0, 0, -ENODEV, -ENODEV, 0x40007c00, 0xffffffff,
 		   SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY),
+	SYSC_QUIRK("sata", 0, 0xfc, 0x1100, -ENODEV, 0x5e412000, 0xffffffff,
+		   SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY),
 	SYSC_QUIRK("usb_host_hs", 0, 0, 0x10, 0x14, 0x50700100, 0xffffffff,
 		   SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY),
 	SYSC_QUIRK("usb_host_hs", 0, 0, 0x10, -ENODEV, 0x50700101, 0xffffffff,
@@ -1466,7 +1514,8 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 	SYSC_QUIRK("usb_otg_hs", 0, 0x400, 0x404, 0x408, 0x00000050,
 		   0xffffffff, SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY),
 	SYSC_QUIRK("usb_otg_hs", 0, 0, 0x10, -ENODEV, 0x4ea2080d, 0xffffffff,
-		   SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY),
+		   SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY |
+		   SYSC_QUIRK_REINIT_ON_RESUME),
 	SYSC_QUIRK("wdt", 0, 0, 0x10, 0x14, 0x502a0500, 0xfffff0f0,
 		   SYSC_MODULE_QUIRK_WDT),
 	/* PRUSS on am3, am4 and am5 */
@@ -1524,7 +1573,6 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 	SYSC_QUIRK("prcm", 0, 0, -ENODEV, -ENODEV, 0x40000400, 0xffffffff, 0),
 	SYSC_QUIRK("rfbi", 0x4832a800, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0),
 	SYSC_QUIRK("rfbi", 0x58002000, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0),
-	SYSC_QUIRK("sata", 0, 0xfc, 0x1100, -ENODEV, 0x5e412000, 0xffffffff, 0),
 	SYSC_QUIRK("scm", 0, 0, 0x10, -ENODEV, 0x40000900, 0xffffffff, 0),
 	SYSC_QUIRK("scm", 0, 0, -ENODEV, -ENODEV, 0x4e8b0100, 0xffffffff, 0),
 	SYSC_QUIRK("scm", 0, 0, -ENODEV, -ENODEV, 0x4f000100, 0xffffffff, 0),
diff --git a/drivers/soc/amlogic/meson-clk-measure.c b/drivers/soc/amlogic/meson-clk-measure.c
index e1957476a006..6dd190270123 100644
--- a/drivers/soc/amlogic/meson-clk-measure.c
+++ b/drivers/soc/amlogic/meson-clk-measure.c
@@ -626,10 +626,8 @@ static int meson_msr_probe(struct platform_device *pdev)
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(base)) {
-		dev_err(&pdev->dev, "io resource mapping failed\n");
+	if (IS_ERR(base))
 		return PTR_ERR(base);
-	}
 
 	priv->regmap = devm_regmap_init_mmio(&pdev->dev, base,
 					     &meson_clk_msr_regmap_config);
diff --git a/drivers/tee/optee/call.c b/drivers/tee/optee/call.c
index 6132cc8d014c..6e6eb836e9b6 100644
--- a/drivers/tee/optee/call.c
+++ b/drivers/tee/optee/call.c
@@ -220,6 +220,7 @@ int optee_open_session(struct tee_context *ctx,
 	struct optee_msg_arg *msg_arg;
 	phys_addr_t msg_parg;
 	struct optee_session *sess = NULL;
+	uuid_t client_uuid;
 
 	/* +2 for the meta parameters added below */
 	shm = get_msg_arg(ctx, arg->num_params + 2, &msg_arg, &msg_parg);
@@ -240,10 +241,11 @@ int optee_open_session(struct tee_context *ctx,
 	memcpy(&msg_arg->params[0].u.value, arg->uuid, sizeof(arg->uuid));
 	msg_arg->params[1].u.value.c = arg->clnt_login;
 
-	rc = tee_session_calc_client_uuid((uuid_t *)&msg_arg->params[1].u.value,
-					  arg->clnt_login, arg->clnt_uuid);
+	rc = tee_session_calc_client_uuid(&client_uuid, arg->clnt_login,
+					  arg->clnt_uuid);
 	if (rc)
 		goto out;
+	export_uuid(msg_arg->params[1].u.octets, &client_uuid);
 
 	rc = optee_to_msg_param(msg_arg->params + 2, arg->num_params, param);
 	if (rc)
diff --git a/drivers/tee/optee/optee_msg.h b/drivers/tee/optee/optee_msg.h
index 81ff593ac4ec..e3d72d09c484 100644
--- a/drivers/tee/optee/optee_msg.h
+++ b/drivers/tee/optee/optee_msg.h
@@ -9,7 +9,7 @@
 #include <linux/types.h>
 
 /*
- * This file defines the OP-TEE message protocol used to communicate
+ * This file defines the OP-TEE message protocol (ABI) used to communicate
  * with an instance of OP-TEE running in secure world.
  *
  * This file is divided into two sections.
@@ -144,9 +144,10 @@ struct optee_msg_param_value {
  * @tmem:	parameter by temporary memory reference
  * @rmem:	parameter by registered memory reference
  * @value:	parameter by opaque value
+ * @octets:	parameter by octet string
  *
  * @attr & OPTEE_MSG_ATTR_TYPE_MASK indicates if tmem, rmem or value is used in
- * the union. OPTEE_MSG_ATTR_TYPE_VALUE_* indicates value,
+ * the union. OPTEE_MSG_ATTR_TYPE_VALUE_* indicates value or octets,
  * OPTEE_MSG_ATTR_TYPE_TMEM_* indicates @tmem and
  * OPTEE_MSG_ATTR_TYPE_RMEM_* indicates @rmem,
  * OPTEE_MSG_ATTR_TYPE_NONE indicates that none of the members are used.
@@ -157,6 +158,7 @@ struct optee_msg_param {
 		struct optee_msg_param_tmem tmem;
 		struct optee_msg_param_rmem rmem;
 		struct optee_msg_param_value value;
+		u8 octets[24];
 	} u;
 };
 
diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h
index fafc1beea504..9837fb011f2f 100644
--- a/include/linux/platform_data/ti-sysc.h
+++ b/include/linux/platform_data/ti-sysc.h
@@ -50,6 +50,7 @@ struct sysc_regbits {
 	s8 emufree_shift;
 };
 
+#define SYSC_QUIRK_REINIT_ON_RESUME	BIT(27)
 #define SYSC_QUIRK_GPMC_DEBUG		BIT(26)
 #define SYSC_MODULE_QUIRK_ENA_RESETDONE	BIT(25)
 #define SYSC_MODULE_QUIRK_PRUSS		BIT(24)