diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2016-12-14 20:42:45 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2016-12-14 20:42:45 -0800 |
| commit | e3842cbfe0976b014288147b130551d8bf52b96c (patch) | |
| tree | 686501f0eb80076240c5f38b34d1acbb105a190b | |
| parent | 4d98ead183a2be77bfea425d5243e32629eaaeb1 (diff) | |
| parent | 4625d2a513d60ca9c3e8cae42c8f3d9efc1b4211 (diff) | |
Merge tag 'dmaengine-4.10-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
"Fairly routine update this time around with all changes specific to
drivers:
- New driver for STMicroelectronics FDMA
- Memory-to-memory transfers on dw dmac
- Support for slave maps on pl08x devices
- Bunch of driver fixes to use dma_pool_zalloc
- Bunch of compile and warning fixes spread across drivers"
[ The ST FDMA driver already came in earlier through the remoteproc tree ]
* tag 'dmaengine-4.10-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits)
dmaengine: sirf-dma: remove unused ‘sdesc’
dmaengine: pl330: remove unused ‘regs’
dmaengine: s3c24xx: remove unused ‘cdata’
dmaengine: stm32-dma: remove unused ‘src_addr’
dmaengine: stm32-dma: remove unused ‘dst_addr’
dmaengine: stm32-dma: remove unused ‘sfcr’
dmaengine: pch_dma: remove unused ‘cookie’
dmaengine: mic_x100_dma: remove unused ‘data’
dmaengine: img-mdc: remove unused ‘prev_phys’
dmaengine: usb-dmac: remove unused ‘uchan’
dmaengine: ioat: remove unused ‘res’
dmaengine: ioat: remove unused ‘ioat_dma’
dmaengine: ioat: remove unused ‘is_raid_device’
dmaengine: pl330: do not generate unaligned access
dmaengine: k3dma: move to dma_pool_zalloc
dmaengine: at_hdmac: move to dma_pool_zalloc
dmaengine: at_xdmac: don't restore unsaved status
dmaengine: ioat: set error code on failures
dmaengine: ioat: set error code on failures
dmaengine: DW DMAC: add multi-block property to device tree
...
53 files changed, 868 insertions, 349 deletions
diff --git a/Documentation/devicetree/bindings/dma/nbpfaxi.txt b/Documentation/devicetree/bindings/dma/nbpfaxi.txt index d5e2522b9ec1..d2e1e62e346a 100644 --- a/Documentation/devicetree/bindings/dma/nbpfaxi.txt +++ b/Documentation/devicetree/bindings/dma/nbpfaxi.txt @@ -23,6 +23,14 @@ Required properties #define NBPF_SLAVE_RQ_LEVEL 4 Optional properties: +- max-burst-mem-read: limit burst size for memory reads + (DMA_MEM_TO_MEM/DMA_MEM_TO_DEV) to this value, specified in bytes, rather + than using the maximum burst size allowed by the hardware's buffer size. +- max-burst-mem-write: limit burst size for memory writes + (DMA_DEV_TO_MEM/DMA_MEM_TO_MEM) to this value, specified in bytes, rather + than using the maximum burst size allowed by the hardware's buffer size. + If both max-burst-mem-read and max-burst-mem-write are set, DMA_MEM_TO_MEM + will use the lower value. You can use dma-channels and dma-requests as described in dma.txt, although they won't be used, this information is derived from the compatibility string. diff --git a/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt b/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt index fd5618bd8fbc..55492c264d17 100644 --- a/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt +++ b/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt @@ -5,13 +5,13 @@ memcpy and memset capabilities. It has been designed for virtualized environments. Each HIDMA HW instance consists of multiple DMA channels. These channels -share the same bandwidth. The bandwidth utilization can be parititioned +share the same bandwidth. The bandwidth utilization can be partitioned among channels based on the priority and weight assignments. There are only two priority levels and 15 weigh assignments possible. Other parameters here determine how much of the system bus this HIDMA -instance can use like maximum read/write request and and number of bytes to +instance can use like maximum read/write request and number of bytes to read/write in a single burst. Main node required properties: @@ -47,12 +47,18 @@ When the OS is not in control of the management interface (i.e. it's a guest), the channel nodes appear on their own, not under a management node. Required properties: -- compatible: must contain "qcom,hidma-1.0" +- compatible: must contain "qcom,hidma-1.0" for initial HW or "qcom,hidma-1.1" +for MSI capable HW. - reg: Addresses for the transfer and event channel - interrupts: Should contain the event interrupt - desc-count: Number of asynchronous requests this channel can handle - iommus: required a iommu node +Optional properties for MSI: +- msi-parent : See the generic MSI binding described in + devicetree/bindings/interrupt-controller/msi.txt for a description of the + msi-parent property. + Example: Hypervisor OS configuration: diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt index 5f2ce669789a..3316a9c2e638 100644 --- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt +++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt @@ -24,6 +24,7 @@ Required Properties: - "renesas,dmac-r8a7793" (R-Car M2-N) - "renesas,dmac-r8a7794" (R-Car E2) - "renesas,dmac-r8a7795" (R-Car H3) + - "renesas,dmac-r8a7796" (R-Car M3-W) - reg: base address and length of the registers block for the DMAC diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt b/Documentation/devicetree/bindings/dma/snps-dma.txt index 0f5583293c9c..4775c66f4508 100644 --- a/Documentation/devicetree/bindings/dma/snps-dma.txt +++ b/Documentation/devicetree/bindings/dma/snps-dma.txt @@ -27,6 +27,8 @@ Optional properties: that services interrupts for this device - is_private: The device channels should be marked as private and not for by the general purpose DMA channel allocator. False if not passed. +- multi-block: Multi block transfers supported by hardware. Array property with + one cell per channel. 0: not supported, 1 (default): supported. Example: diff --git a/Documentation/dmaengine/client.txt b/Documentation/dmaengine/client.txt index 9e33189745f0..c72b4563de10 100644 --- a/Documentation/dmaengine/client.txt +++ b/Documentation/dmaengine/client.txt @@ -37,8 +37,8 @@ The slave DMA usage consists of following steps: 2. Set slave and controller specific parameters Next step is always to pass some specific information to the DMA - driver. Most of the generic information which a slave DMA can use - is in struct dma_slave_config. This allows the clients to specify + driver. Most of the generic information which a slave DMA can use + is in struct dma_slave_config. This allows the clients to specify DMA direction, DMA addresses, bus widths, DMA burst lengths etc for the peripheral. @@ -52,7 +52,7 @@ The slave DMA usage consists of following steps: struct dma_slave_config *config) Please see the dma_slave_config structure definition in dmaengine.h - for a detailed explanation of the struct members. Please note + for a detailed explanation of the struct members. Please note that the 'direction' member will be going away as it duplicates the direction given in the prepare call. @@ -101,7 +101,7 @@ The slave DMA usage consists of following steps: desc = dmaengine_prep_slave_sg(chan, sgl, nr_sg, direction, flags); Once a descriptor has been obtained, the callback information can be - added and the descriptor must then be submitted. Some DMA engine + added and the descriptor must then be submitted. Some DMA engine drivers may hold a spinlock between a successful preparation and submission so it is important that these two operations are closely paired. @@ -138,7 +138,7 @@ The slave DMA usage consists of following steps: activity via other DMA engine calls not covered in this document. dmaengine_submit() will not start the DMA operation, it merely adds - it to the pending queue. For this, see step 5, dma_async_issue_pending. + it to the pending queue. For this, see step 5, dma_async_issue_pending. 5. Issue pending DMA requests and wait for callback notification @@ -184,13 +184,13 @@ Further APIs: 3. int dmaengine_resume(struct dma_chan *chan) - Resume a previously paused DMA channel. It is invalid to resume a + Resume a previously paused DMA channel. It is invalid to resume a channel which is not currently paused. 4. enum dma_status dma_async_is_tx_complete(struct dma_chan *chan, dma_cookie_t cookie, dma_cookie_t *last, dma_cookie_t *used) - This can be used to check the status of the channel. Please see + This can be used to check the status of the channel. Please see the documentation in include/linux/dmaengine.h for a more complete description of this API. @@ -200,7 +200,7 @@ Further APIs: Note: Not all DMA engine drivers can return reliable information for - a running DMA channel. It is recommended that DMA engine users + a running DMA channel. It is recommended that DMA engine users pause or stop (via dmaengine_terminate_all()) the channel before using this API. diff --git a/Documentation/dmaengine/dmatest.txt b/Documentation/dmaengine/dmatest.txt index dd77a81bdb80..fb683c72dea8 100644 --- a/Documentation/dmaengine/dmatest.txt +++ b/Documentation/dmaengine/dmatest.txt @@ -34,7 +34,7 @@ command: % ls -1 /sys/class/dma/ Once started a message like "dmatest: Started 1 threads using dma0chan0" is -emitted. After that only test failure messages are reported until the test +emitted. After that only test failure messages are reported until the test stops. Note that running a new test will not stop any in progress test. @@ -43,11 +43,11 @@ The following command returns the state of the test. % cat /sys/module/dmatest/parameters/run To wait for test completion userpace can poll 'run' until it is false, or use -the wait parameter. Specifying 'wait=1' when loading the module causes module +the wait parameter. Specifying 'wait=1' when loading the module causes module initialization to pause until a test run has completed, while reading /sys/module/dmatest/parameters/wait waits for any running test to complete -before returning. For example, the following scripts wait for 42 tests -to complete before exiting. Note that if 'iterations' is set to 'infinite' then +before returning. For example, the following scripts wait for 42 tests +to complete before exiting. Note that if 'iterations' is set to 'infinite' then waiting is disabled. Example: @@ -81,7 +81,7 @@ Example of output: The message format is unified across the different types of errors. A number in the parens represents additional information, e.g. error code, error counter, -or status. A test thread also emits a summary line at completion listing the +or status. A test thread also emits a summary line at completion listing the number of tests executed, number that failed, and a result code. Example: diff --git a/Documentation/dmaengine/provider.txt b/Documentation/dmaengine/provider.txt index c4fd47540b31..e33bc1c8ed2c 100644 --- a/Documentation/dmaengine/provider.txt +++ b/Documentation/dmaengine/provider.txt @@ -384,7 +384,7 @@ where to put them) - The descriptor should be prepared for reuse by invoking dmaengine_desc_set_reuse() which will set DMA_CTRL_REUSE. - dmaengine_desc_set_reuse() will succeed only when channel support - reusable descriptor as exhibited by capablities + reusable descriptor as exhibited by capabilities - As a consequence, if a device driver wants to skip the dma_map_sg() and dma_unmap_sg() in between 2 transfers, because the DMA'd data wasn't used, it can resubmit the transfer right after its completion. diff --git a/Documentation/dmaengine/pxa_dma.txt b/Documentation/dmaengine/pxa_dma.txt index 413ef9cfaa4d..0736d44b5438 100644 --- a/Documentation/dmaengine/pxa_dma.txt +++ b/Documentation/dmaengine/pxa_dma.txt @@ -29,7 +29,7 @@ Constraints d) Bandwidth guarantee The PXA architecture has 4 levels of DMAs priorities : high, normal, low. - The high prorities get twice as much bandwidth as the normal, which get twice + The high priorities get twice as much bandwidth as the normal, which get twice as much as the low priorities. A driver should be able to request a priority, especially the real-time ones such as pxa_camera with (big) throughputs. diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi b/arch/arc/boot/dts/abilis_tb10x.dtsi index de53f5c3251c..3121536b25a3 100644 --- a/arch/arc/boot/dts/abilis_tb10x.dtsi +++ b/arch/arc/boot/dts/abilis_tb10x.dtsi @@ -129,6 +129,7 @@ data-width = <4>; clocks = <&ahb_clk>; clock-names = "hclk"; + multi-block = <1 1 1 1 1 1>; }; i2c0: i2c@FF120000 { diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index 449acf0d8272..17ea0abcdbd7 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -118,6 +118,7 @@ block_size = <0xfff>; dma-masters = <2>; data-width = <8 8>; + multi-block = <1 1 1 1 1 1 1 1>; }; dma@eb000000 { @@ -134,6 +135,7 @@ chan_priority = <1>; block_size = <0xfff>; data-width = <8 8>; + multi-block = <1 1 1 1 1 1 1 1>; }; fsmc: flash@b0000000 { diff --git a/arch/arm/mach-s3c64xx/pl080.c b/arch/arm/mach-s3c64xx/pl080.c index 89c5a62830a7..261820a855ec 100644 --- a/arch/arm/mach-s3c64xx/pl080.c +++ b/arch/arm/mach-s3c64xx/pl080.c @@ -117,6 +117,25 @@ static struct pl08x_channel_data s3c64xx_dma0_info[] = { } }; +static const struct dma_slave_map s3c64xx_dma0_slave_map[] = { + { "s3c6400-uart.0", "tx", &s3c64xx_dma0_info[0] }, + { "s3c6400-uart.0", "rx", &s3c64xx_dma0_info[1] }, + { "s3c6400-uart.1", "tx", &s3c64xx_dma0_info[2] }, + { "s3c6400-uart.1", "rx", &s3c64xx_dma0_info[3] }, + { "s3c6400-uart.2", "tx", &s3c64xx_dma0_info[4] }, + { "s3c6400-uart.2", "rx", &s3c64xx_dma0_info[5] }, + { "s3c6400-uart.3", "tx", &s3c64xx_dma0_info[6] }, + { "s3c6400-uart.3", "rx", &s3c64xx_dma0_info[7] }, + { "samsung-pcm.0", "tx", &s3c64xx_dma0_info[8] }, + { "samsung-pcm.0", "rx", &s3c64xx_dma0_info[9] }, + { "samsung-i2s.0", "tx", &s3c64xx_dma0_info[10] }, + { "samsung-i2s.0", "rx", &s3c64xx_dma0_info[11] }, + { "s3c6410-spi.0", "tx", &s3c64xx_dma0_info[12] }, + { "s3c6410-spi.0", "rx", &s3c64xx_dma0_info[13] }, + { "samsung-i2s.2", "tx", &s3c64xx_dma0_info[14] }, + { "samsung-i2s.2", "rx", &s3c64xx_dma0_info[15] }, +}; + struct pl08x_platform_data s3c64xx_dma0_plat_data = { .memcpy_channel = { .bus_id = "memcpy", @@ -134,6 +153,8 @@ struct pl08x_platform_data s3c64xx_dma0_plat_data = { .put_xfer_signal = pl08x_put_xfer_signal, .slave_channels = s3c64xx_dma0_info, .num_slave_channels = ARRAY_SIZE(s3c64xx_dma0_info), + .slave_map = s3c64xx_dma0_slave_map, + .slave_map_len = ARRAY_SIZE(s3c64xx_dma0_slave_map), }; static AMBA_AHB_DEVICE(s3c64xx_dma0, "dma-pl080s.0", 0, @@ -207,6 +228,15 @@ static struct pl08x_channel_data s3c64xx_dma1_info[] = { }, }; +static const struct dma_slave_map s3c64xx_dma1_slave_map[] = { + { "samsung-pcm.1", "tx", &s3c64xx_dma1_info[0] }, + { "samsung-pcm.1", "rx", &s3c64xx_dma1_info[1] }, + { "samsung-i2s.1", "tx", &s3c64xx_dma1_info[2] }, + { "samsung-i2s.1", "rx", &s3c64xx_dma1_info[3] }, + { "s3c6410-spi.1", "tx", &s3c64xx_dma1_info[4] }, + { "s3c6410-spi.1", "rx", &s3c64xx_dma1_info[5] }, +}; + struct pl08x_platform_data s3c64xx_dma1_plat_data = { .memcpy_channel = { .bus_id = "memcpy", @@ -224,6 +254,8 @@ struct pl08x_platform_data s3c64xx_dma1_plat_data = { .put_xfer_signal = pl08x_put_xfer_signal, .slave_channels = s3c64xx_dma1_info, .num_slave_channels = ARRAY_SIZE(s3c64xx_dma1_info), + .slave_map = s3c64xx_dma1_slave_map, + .slave_map_len = ARRAY_SIZE(s3c64xx_dma1_slave_map), }; static AMBA_AHB_DEVICE(s3c64xx_dma1, "dma-pl080s.1", 0, diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index e93aa6734147..cf7b95fddbb3 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -1124,15 +1124,6 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio; - pd.dma_tx = (void *)DMACH_SPI0_TX; - pd.dma_rx = (void *)DMACH_SPI0_RX; -#if defined(CONFIG_PL330_DMA) - pd.filter = pl330_filter; -#elif defined(CONFIG_S3C64XX_PL080) - pd.filter = pl08x_filter_id; -#elif defined(CONFIG_S3C24XX_DMAC) - pd.filter = s3c24xx_dma_filter; -#endif s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi0); } @@ -1169,14 +1160,6 @@ void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio; - pd.dma_tx = (void *)DMACH_SPI1_TX; - pd.dma_rx = (void *)DMACH_SPI1_RX; -#if defined(CONFIG_PL330_DMA) - pd.filter = pl330_filter; -#elif defined(CONFIG_S3C64XX_PL080) - pd.filter = pl08x_filter_id; -#endif - s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1); } @@ -1213,13 +1196,6 @@ void __init s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio; - pd.dma_tx = (void *)DMACH_SPI2_TX; - pd.dma_rx = (void *)DMACH_SPI2_RX; -#if defined(CONFIG_PL330_DMA) - pd.filter = pl330_filter; -#elif defined(CONFIG_S3C64XX_PL080) - pd.filter = pl08x_filter_id; -#endif s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi2); } diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 2154ea3c5d1c..263495d0adbd 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -494,7 +494,7 @@ config TEGRA20_APB_DMA or vice versa. It does not support memory to memory data transfer. config TEGRA210_ADMA - bool "NVIDIA Tegra210 ADMA support" + tristate "NVIDIA Tegra210 ADMA support" depends on (ARCH_TEGRA_210_SOC || COMPILE_TEST) && PM_CLK select DMA_ENGINE select DMA_VIRTUAL_CHANNELS diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 939a7c31f760..0b7c6ce629a6 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1793,6 +1793,13 @@ bool pl08x_filter_id(struct dma_chan *chan, void *chan_id) } EXPORT_SYMBOL_GPL(pl08x_filter_id); +static bool pl08x_filter_fn(struct dma_chan *chan, void *chan_id) +{ + struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); + + return plchan->cd == chan_id; +} + /* * Just check that the device is there and active * TODO: turn this bit on/off depending on the number of physical channels @@ -2307,6 +2314,10 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) ret = -EINVAL; goto out_no_platdata; } + } else { + pl08x->slave.filter.map = pl08x->pd->slave_map; + pl08x->slave.filter.mapcnt = pl08x->pd->slave_map_len; + pl08x->slave.filter.fn = pl08x_filter_fn; } /* By default, AHB1 only. If dualmaster, from platform */ diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index a4c8f80db29d..1baf3404a365 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -111,9 +111,8 @@ static struct at_desc *atc_alloc_descriptor(struct dma_chan *chan, struct at_dma *atdma = to_at_dma(chan->device); dma_addr_t phys; - desc = dma_pool_alloc(atdma->dma_desc_pool, gfp_flags, &phys); + desc = dma_pool_zalloc(atdma->dma_desc_pool, gfp_flags, &phys); if (desc) { - memset(desc, 0, sizeof(struct at_desc)); INIT_LIST_HEAD(&desc->tx_list); dma_async_tx_descriptor_init(&desc->txd, chan); /* txd.flags will be overwritten in prep functions */ diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c index b7d7f2d443a1..7d4e0bcda9af 100644 --- a/drivers/dma/at_xdmac.c +++ b/drivers/dma/at_xdmac.c @@ -221,7 +221,6 @@ struct at_xdmac { int irq; struct clk *clk; u32 save_gim; - u32 save_gs; struct dma_pool *at_xdmac_desc_pool; struct at_xdmac_chan chan[0]; }; @@ -444,9 +443,8 @@ static struct at_xdmac_desc *at_xdmac_alloc_desc(struct dma_chan *chan, struct at_xdmac *atxdmac = to_at_xdmac(chan->device); dma_addr_t phys; - desc = dma_pool_alloc(atxdmac->at_xdmac_desc_pool, gfp_flags, &phys); + desc = dma_pool_zalloc(atxdmac->at_xdmac_desc_pool, gfp_flags, &phys); if (desc) { - memset(desc, 0, sizeof(*desc)); INIT_LIST_HEAD(&desc->descs_list); dma_async_tx_descriptor_init(&desc->tx_dma_desc, chan); desc->tx_dma_desc.tx_submit = at_xdmac_tx_submit; @@ -1896,7 +1894,6 @@ static int atmel_xdmac_resume(struct device *dev) } at_xdmac_write(atxdmac, AT_XDMAC_GIE, atxdmac->save_gim); - at_xdmac_write(atxdmac, AT_XDMAC_GE, atxdmac->save_gs); list_for_each_entry_safe(chan, _chan, &atxdmac->dma.channels, device_node) { atchan = to_at_xdmac_chan(chan); at_xdmac_chan_write(atchan, AT_XDMAC_CC, atchan->save_cc); diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index cf76fc6149e5..451f899f74e4 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -164,7 +164,9 @@ struct dmatest_thread { struct task_struct *task; struct dma_chan *chan; u8 **srcs; + u8 **usrcs; u8 **dsts; + u8 **udsts; enum dma_transaction_type type; bool done; }; @@ -431,6 +433,7 @@ static int dmatest_func(void *data) ktime_t comparetime = ktime_set(0, 0); s64 runtime = 0; unsigned long long total_len = 0; + u8 align = 0; set_freezable(); @@ -441,20 +444,24 @@ static int dmatest_func(void *data) params = &info->params; chan = thread->chan; dev = chan->device; - if (thread->type == DMA_MEMCPY) + if (thread->type == DMA_MEMCPY) { + align = dev->copy_align; src_cnt = dst_cnt = 1; - else if (thread->type == DMA_SG) + } else if (thread->type == DMA_SG) { + align = dev->copy_align; src_cnt = dst_cnt = sg_buffers; - else if (thread->type == DMA_XOR) { + } else if (thread->type == DMA_XOR) { /* force odd to ensure dst = src */ src_cnt = min_odd(params->xor_sources | 1, dev->max_xor); dst_cnt = 1; + align = dev->xor_align; } else if (thread->type == DMA_PQ) { /* force odd to ensure dst = src */ src_cnt = min_odd(params->pq_sources | 1, dma_maxpq(dev, 0)); dst_cnt = 2; + align = dev->pq_align; - pq_coefs = kmalloc(params->pq_sources+1, GFP_KERNEL); + pq_coefs = kmalloc(params->pq_sources + 1, GFP_KERNEL); if (!pq_coefs) goto err_thread_type; @@ -463,23 +470,47 @@ static int dmatest_func(void *data) } else goto err_thread_type; - thread->srcs = kcalloc(src_cnt+1, sizeof(u8 *), GFP_KERNEL); + thread->srcs = kcalloc(src_cnt + 1, sizeof(u8 *), GFP_KERNEL); if (!thread->srcs) goto err_srcs; + + thread->usrcs = kcalloc(src_cnt + 1, sizeof(u8 *), GFP_KERNEL); + if (!thread->usrcs) + goto err_usrcs; + for (i = 0; i < src_cnt; i++) { - thread->srcs[i] = kmalloc(params->buf_size, GFP_KERNEL); - if (!thread->srcs[i]) + thread->usrcs[i] = kmalloc(params->buf_size + align, + GFP_KERNEL); + if (!thread->usrcs[i]) goto err_srcbuf; + + /* align srcs to alignment restriction */ + if (align) + thread->srcs[i] = PTR_ALIGN(thread->usrcs[i], align); + else + thread->srcs[i] = thread->usrcs[i]; } thread->srcs[i] = NULL; - thread->dsts = kcalloc(dst_cnt+1, sizeof(u8 *), GFP_KERNEL); + thread->dsts = kcalloc(dst_cnt + 1, sizeof(u8 *), GFP_KERNEL); if (!thread->dsts) goto err_dsts; + + thread->udsts = kcalloc(dst_cnt + 1, sizeof(u8 *), GFP_KERNEL); + if (!thread->udsts) + goto err_udsts; + for (i = 0; i < dst_cnt; i++) { - thread->dsts[i] = kmalloc(params->buf_size, GFP_KERNEL); - if (!thread->dsts[i]) + thread->udsts[i] = kmalloc(params->buf_size + align, + GFP_KERNEL); + if (!thread->udsts[i]) goto err_dstbuf; + + /* align dsts to alignment restriction */ + if (align) + thread->dsts[i] = PTR_ALIGN(thread->udsts[i], align); + else + thread->dsts[i] = thread->udsts[i]; } thread->dsts[i] = NULL; @@ -498,20 +529,11 @@ static int dmatest_func(void *data) dma_addr_t srcs[src_cnt]; dma_addr_t *dsts; unsigned int src_off, dst_off, len; - u8 align = 0; struct scatterlist tx_sg[src_cnt]; struct scatterlist rx_sg[src_cnt]; total_tests++; - /* honor alignment restrictions */ - if (thread->type == DMA_MEMCPY || thread->type == DMA_SG) - align = dev->copy_align; - else if (thread->type == DMA_XOR) - align = dev->xor_align; - else if (thread->type == DMA_PQ) - align = dev->pq_align; - if (1 << align > params->buf_size) { pr_err("%u-byte buffer too small for %d-byte alignment\n", params->buf_size, 1 << align); @@ -549,7 +571,7 @@ static int dmatest_func(void *data) filltime = ktime_add(filltime, diff); } - um = dmaengine_get_unmap_data(dev->dev, src_cnt+dst_cnt, + um = dmaengine_get_unmap_data(dev->dev, src_cnt + dst_cnt, GFP_KERNEL); if (!um) { failed_tests++; @@ -729,13 +751,17 @@ static int dmatest_func(void *data) ret = 0; err_dstbuf: - for (i = 0; thread->dsts[i]; i++) - kfree(thread->dsts[i]); + for (i = 0; thread->udsts[i]; i++) + kfree(thread->udsts[i]); + kfree(thread->udsts); +err_udsts: kfree(thread->dsts); err_dsts: err_srcbuf: - for (i = 0; thread->srcs[i]; i++) - kfree(thread->srcs[i]); + for (i = 0; thread->usrcs[i]; i++) + kfree(thread->usrcs[i]); + kfree(thread->usrcs); +err_usrcs: kfree(thread->srcs); err_srcs: kfree(pq_coefs); diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c index c2c0a613cb7a..e5adf5d1c34f 100644 --- a/drivers/dma/dw/core.c +++ b/drivers/dma/dw/core.c @@ -1569,7 +1569,7 @@ int dw_dma_probe(struct dw_dma_chip *chip) (dwc_params >> DWC_PARAMS_MBLK_EN & 0x1) == 0; } else { dwc->block_size = pdata->block_size; - dwc->nollp = pdata->is_nollp; + dwc->nollp = !pdata->multi_block[i]; } } diff --git a/drivers/dma/dw/platform.c b/drivers/dma/dw/platform.c index 5bda0eb9f393..b1655e40cfa2 100644 --- a/drivers/dma/dw/platform.c +++ b/drivers/dma/dw/platform.c @@ -102,7 +102,7 @@ dw_dma_parse_dt(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; struct dw_dma_platform_data *pdata; - u32 tmp, arr[DW_DMA_MAX_NR_MASTERS]; + u32 tmp, arr[DW_DMA_MAX_NR_MASTERS], mb[DW_DMA_MAX_NR_CHANNELS]; u32 nr_masters; u32 nr_channels; @@ -118,6 +118,8 @@ dw_dma_parse_dt(struct platform_device *pdev) if (of_property_read_u32(np, "dma-channels", &nr_channels)) return NULL; + if (nr_channels > DW_DMA_MAX_NR_CHANNELS) + return NULL; pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) @@ -129,6 +131,12 @@ dw_dma_parse_dt(struct platform_device *pdev) if (of_property_read_bool(np, "is_private")) pdata->is_private = true; + /* + * All known devices, which use DT for configuration, support + * memory-to-memory transfers. So enable it by default. + */ + pdata->is_memcpy = true; + if (!of_property_read_u32(np, "chan_allocation_order", &tmp)) pdata->chan_allocation_order = (unsigned char)tmp; @@ -146,6 +154,14 @@ dw_dma_parse_dt(struct platform_device *pdev) pdata->data_width[tmp] = BIT(arr[tmp] & 0x07); } + if (!of_property_read_u32_array(np, "multi-block", mb, nr_channels)) { + for (tmp = 0; tmp < nr_channels; tmp++) + pdata->multi_block[tmp] = mb[tmp]; + } else { + for (tmp = 0; tmp < nr_channels; tmp++) + pdata->multi_block[tmp] = 1; + } + return pdata; } #else diff --git a/drivers/dma/dw/regs.h b/drivers/dma/dw/regs.h index f65dd104479f..4e0128c62704 100644 --- a/drivers/dma/dw/regs.h +++ b/drivers/dma/dw/regs.h @@ -12,7 +12,8 @@ #include <linux/interrupt.h> #include <linux/dmaengine.h> -#define DW_DMA_MAX_NR_CHANNELS 8 +#include "internal.h" + #define DW_DMA_MAX_NR_REQUESTS 16 /* flow controller */ diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c index 77242b37ef87..3879f80a4815 100644 --- a/drivers/dma/edma.c +++ b/drivers/dma/edma.c @@ -2451,6 +2451,9 @@ static int edma_pm_resume(struct device *dev) int i; s8 (*queue_priority_mapping)[2]; + /* re initialize dummy slot to dummy param set */ + edma_write_slot(ecc, ecc->dummy_slot, &dummy_paramset); + queue_priority_mapping = ecc->info->queue_priority_mapping; /* Event queue priority mapping */ diff --git a/drivers/dma/fsl_raid.c b/drivers/dma/fsl_raid.c index db2f9e1653a2..90d29f90acfb 100644 --- a/drivers/dma/fsl_raid.c +++ b/drivers/dma/fsl_raid.c @@ -881,6 +881,7 @@ static struct of_device_id fsl_re_ids[] = { { .compatible = "fsl,raideng-v1.0", }, {} }; +MODULE_DEVICE_TABLE(of, fsl_re_ids); static struct platform_driver fsl_re_driver = { .driver = { diff --git a/drivers/dma/hsu/pci.c b/drivers/dma/hsu/pci.c index b51639f045ed..4875fa428e81 100644 --- a/drivers/dma/hsu/pci.c +++ b/drivers/dma/hsu/pci.c @@ -77,13 +77,15 @@ static int hsu_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (!chip) return -ENOMEM; + ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES); + if (ret < 0) + return ret; + chip->dev = &pdev->dev; chip->regs = pcim_iomap_table(pdev)[0]; chip->length = pci_resource_len(pdev, 0); chip->offset = HSU_PCI_CHAN_OFFSET; - chip->irq = pdev->irq; - - pci_enable_msi(pdev); + chip->irq = pci_irq_vector(pdev, 0); ret = hsu_dma_probe(chip); if (ret) diff --git a/drivers/dma/img-mdc-dma.c b/drivers/dma/img-mdc-dma.c index 624f1e1e9c55..54db1411ce73 100644 --- a/drivers/dma/img-mdc-dma.c +++ b/drivers/dma/img-mdc-dma.c @@ -292,7 +292,7 @@ static struct dma_async_tx_descriptor *mdc_prep_dma_memcpy( struct mdc_dma *mdma = mchan->mdma; struct mdc_tx_desc *mdesc; struct mdc_hw_list_desc *curr, *prev = NULL; - dma_addr_t curr_phys, prev_phys; + dma_addr_t curr_phys; if (!len) return NULL; @@ -324,7 +324,6 @@ static struct dma_async_tx_descriptor *mdc_prep_dma_memcpy( xfer_size); prev = curr; - prev_phys = curr_phys; mdesc->list_len++; src += xfer_size; @@ -375,7 +374,7 @@ static struct dma_async_tx_descriptor *mdc_prep_dma_cyclic( struct mdc_dma *mdma = mchan->mdma; struct mdc_tx_desc *mdesc; struct mdc_hw_list_desc *curr, *prev = NULL; - dma_addr_t curr_phys, prev_phys; + dma_addr_t curr_phys; if (!buf_len && !period_len) return NULL; @@ -430,7 +429,6 @@ static struct dma_async_tx_descriptor *mdc_prep_dma_cyclic( } prev = curr; - prev_phys = curr_phys; mdesc->list_len++; buf_addr += xfer_size; @@ -458,7 +456,7 @@ static struct dma_async_tx_descriptor *mdc_prep_slave_sg( struct mdc_tx_desc *mdesc; struct scatterlist *sg; struct mdc_hw_list_desc *curr, *prev = NULL; - dma_addr_t curr_phys, prev_phys; + dma_addr_t curr_phys; unsigned int i; if (!sgl) @@ -509,7 +507,6 @@ static struct dma_async_tx_descriptor *mdc_prep_slave_sg( } prev = curr; - prev_phys = curr_phys; mdesc->list_len++; mdesc->list_xfer_size += xfer_size; diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index b9629b2bfc05..d1651a50c349 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -298,6 +298,7 @@ struct sdma_engine; * @event_id1 for channels that use 2 events * @word_size peripheral access size * @buf_tail ID of the buffer that was processed + * @buf_ptail ID of the previous buffer that was processed * @num_bd max NUM_BD. number of descriptors currently handling */ struct sdma_channel { @@ -309,6 +310,7 @@ struct sdma_channel { unsigned int event_id1; enum dma_slave_buswidth word_size; unsigned int buf_tail; + unsigned int buf_ptail; unsigned int num_bd; unsigned int period_len; struct sdma_buffer_descriptor *bd; @@ -700,6 +702,8 @@ static void sdma_update_channel_loop(struct sdma_channel *sdmac) sdmac->chn_real_count = bd->mode.count; bd->mode.status |= BD_DONE; bd->mode.count = sdmac->period_len; + sdmac->buf_ptail = sdmac->buf_tail; + sdmac->buf_tail = (sdmac->buf_tail + 1) % sdmac->num_bd; /* * The callback is called from the interrupt context in order @@ -710,9 +714,6 @@ static void sdma_update_channel_loop(struct sdma_channel *sdmac) dmaengine_desc_get_callback_invoke(&sdmac->desc, NULL); - sdmac->buf_tail++; - sdmac->buf_tail %= sdmac->num_bd; - if (error) sdmac->status = old_status; } @@ -1186,6 +1187,8 @@ static struct dma_async_tx_descriptor *sdma_prep_slave_sg( sdmac->flags = 0; sdmac->buf_tail = 0; + sdmac->buf_ptail = 0; + sdmac->chn_real_count = 0; dev_dbg(sdma->dev, "setting up %d entries for channel %d.\n", sg_len, channel); @@ -1288,6 +1291,8 @@ static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic( sdmac->status = DMA_IN_PROGRESS; sdmac->buf_tail = 0; + sdmac->buf_ptail = 0; + sdmac->chn_real_count = 0; sdmac->period_len = period_len; sdmac->flags |= IMX_DMA_SG_LOOP; @@ -1385,7 +1390,7 @@ static enum dma_status sdma_tx_status(struct dma_chan *chan, u32 residue; if (sdmac->flags & IMX_DMA_SG_LOOP) - residue = (sdmac->num_bd - sdmac->buf_tail) * + residue = (sdmac->num_bd - sdmac->buf_ptail) * sdmac->period_len - sdmac->chn_real_count; else residue = sdmac->chn_count - sdmac->chn_real_count; diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c index 49386ce04bf5..a371b07a0981 100644 --- a/drivers/dma/ioat/dma.c +++ b/drivers/dma/ioat/dma.c @@ -39,6 +39,7 @@ #include "../dmaengine.h" static char *chanerr_str[] = { + "DMA Transfer Source Address Error", "DMA Transfer Destination Address Error", "Next Descriptor Address Error", "Descriptor Error", @@ -66,7 +67,6 @@ static char *chanerr_str[] = { "Result Guard Tag verification Error", "Result Application Tag verification Error", "Result Reference Tag verification Error", - NULL }; static void ioat_eh(struct ioatdma_chan *ioat_chan); @@ -75,13 +75,10 @@ static void ioat_print_chanerrs(struct ioatdma_chan *ioat_chan, u32 chanerr) { int i; - for (i = 0; i < 32; i++) { + for (i = 0; i < ARRAY_SIZE(chanerr_str); i++) { if ((chanerr >> i) & 1) { - if (chanerr_str[i]) { - dev_err(to_dev(ioat_chan), "Err(%d): %s\n", - i, chanerr_str[i]); - } else - break; + dev_err(to_dev(ioat_chan), "Err(%d): %s\n", + i, chanerr_str[i]); } } } @@ -341,15 +338,12 @@ ioat_alloc_ring_ent(struct dma_chan *chan, int idx, gfp_t flags) { struct ioat_dma_descriptor *hw; struct ioat_ring_ent *desc; - struct ioatdma_device *ioat_dma; struct ioatdma_chan *ioat_chan = to_ioat_chan(chan); int chunk; dma_addr_t phys; u8 *pos; off_t offs; - ioat_dma = to_ioatdma_device(chan->device); - chunk = idx / IOAT_DESCS_PER_2M; idx &= (IOAT_DESCS_PER_2M - 1); offs = idx * IOAT_DESC_SZ; @@ -614,11 +608,8 @@ static void __cleanup(struct ioatdma_chan *ioat_chan, dma_addr_t phys_complete) tx = &desc->txd; if (tx->cookie) { - struct dmaengine_result res; - dma_cookie_complete(tx); dma_descriptor_unmap(tx); - res.result = DMA_TRANS_NOERROR; dmaengine_desc_get_callback_invoke(tx, NULL); tx->callback = NULL; tx->callback_result = NULL; diff --git a/drivers/dma/ioat/init.c b/drivers/dma/ioat/init.c index 015f7110b96d..90eddd9f07e4 100644 --- a/drivers/dma/ioat/init.c +++ b/drivers/dma/ioat/init.c @@ -340,11 +340,13 @@ static int ioat_dma_self_test(struct ioatdma_device *ioat_dma) dma_src = dma_map_single(dev, src, IOAT_TEST_SIZE, DMA_TO_DEVICE); if (dma_mapping_error(dev, dma_src)) { dev_err(dev, "mapping src buffer failed\n"); + err = -ENOMEM; goto free_resources; } dma_dest = dma_map_single(dev, dest, IOAT_TEST_SIZE, DMA_FROM_DEVICE); if (dma_mapping_error(dev, dma_dest)) { dev_err(dev, "mapping dest buffer failed\n"); + err = -ENOMEM; goto unmap_src; } flags = DMA_PREP_INTERRUPT; @@ -827,16 +829,20 @@ static int ioat_xor_val_self_test(struct ioatdma_device *ioat_dma) op = IOAT_OP_XOR; dest_dma = dma_map_page(dev, dest, 0, PAGE_SIZE, DMA_FROM_DEVICE); - if (dma_mapping_error(dev, dest_dma)) + if (dma_mapping_error(dev, dest_dma)) { + err = -ENOMEM; goto free_resources; + } for (i = 0; i < IOAT_NUM_SRC_TEST; i++) dma_srcs[i] = DMA_ERROR_CODE; for (i = 0; i < IOAT_NUM_SRC_TEST; i++) { dma_srcs[i] = dma_map_page(dev, xor_srcs[i], 0, PAGE_SIZE, DMA_TO_DEVICE); - if (dma_mapping_error(dev, dma_srcs[i])) + if (dma_mapping_error(dev, dma_srcs[i])) { + err = -ENOMEM; goto dma_unmap; + } } tx = dma->device_prep_dma_xor(dma_chan, dest_dma, dma_srcs, IOAT_NUM_SRC_TEST, PAGE_SIZE, @@ -904,8 +910,10 @@ static int ioat_xor_val_self_test(struct ioatdma_device *ioat_dma) for (i = 0; i < IOAT_NUM_SRC_TEST + 1; i++) { dma_srcs[i] = dma_map_page(dev, xor_val_srcs[i], 0, PAGE_SIZE, DMA_TO_DEVICE); - if (dma_mapping_error(dev, dma_srcs[i])) + if (dma_mapping_error(dev, dma_srcs[i])) { + err = -ENOMEM; goto dma_unmap; + } } tx = dma->device_prep_dma_xor_val(dma_chan, dma_srcs, IOAT_NUM_SRC_TEST + 1, PAGE_SIZE, @@ -957,8 +965,10 @@ static int ioat_xor_val_self_test(struct ioatdma_device *ioat_dma) for (i = 0; i < IOAT_NUM_SRC_TEST + 1; i++) { dma_srcs[i] = dma_map_page(dev, xor_val_srcs[i], 0, PAGE_SIZE, DMA_TO_DEVICE); - if (dma_mapping_error(dev, dma_srcs[i])) + if (dma_mapping_error(dev, dma_srcs[i])) { + err = -ENOMEM; goto dma_unmap; + } } tx = dma->device_prep_dma_xor_val(dma_chan, dma_srcs, IOAT_NUM_SRC_TEST + 1, PAGE_SIZE, @@ -1071,7 +1081,6 @@ static int ioat3_dma_probe(struct ioatdma_device *ioat_dma, int dca) struct dma_device *dma; struct dma_chan *c; struct ioatdma_chan *ioat_chan; - bool is_raid_device = false; int err; u16 val16; @@ -1095,7 +1104,6 @@ static int ioat3_dma_probe(struct ioatdma_device *ioat_dma, int dca) ioat_dma->cap &= ~(IOAT_CAP_XOR|IOAT_CAP_PQ); if (ioat_dma->cap & IOAT_CAP_XOR) { - is_raid_device = true; dma->max_xor = 8; dma_cap_set(DMA_XOR, dma->cap_mask); @@ -1106,7 +1114,6 @@ static int ioat3_dma_probe(struct ioatdma_device *ioat_dma, int dca) } if (ioat_dma->cap & IOAT_CAP_PQ) { - is_raid_device = true; dma->device_prep_dma_pq = ioat_prep_pq; dma->device_prep_dma_pq_val = ioat_prep_pq_val; diff --git a/drivers/dma/k3dma.c b/drivers/dma/k3dma.c index aabcb7934b05..01e25c68dd5a 100644 --- a/drivers/dma/k3dma.c +++ b/drivers/dma/k3dma.c @@ -458,13 +458,12 @@ static struct k3_dma_desc_sw *k3_dma_alloc_desc_resource(int num, if (!ds) return NULL; - ds->desc_hw = dma_pool_alloc(d->pool, GFP_NOWAIT, &ds->desc_hw_lli); + ds->desc_hw = dma_pool_zalloc(d->pool, GFP_NOWAIT, &ds->desc_hw_lli); if (!ds->desc_hw) { dev_dbg(chan->device->dev, "vch %p: dma alloc fail\n", &c->vc); kfree(ds); return NULL; } - memset(ds->desc_hw, 0, sizeof(struct k3_desc_hw) * num); ds->desc_num = num; return ds; } diff --git a/drivers/dma/mic_x100_dma.c b/drivers/dma/mic_x100_dma.c index 818255844a3c..5ba5714d0b7c 100644 --- a/drivers/dma/mic_x100_dma.c +++ b/drivers/dma/mic_x100_dma.c @@ -554,9 +554,7 @@ static int mic_dma_init(struct mic_dma_device *mic_dma_dev, int ret; for (i = first_chan; i < first_chan + MIC_DMA_NUM_CHAN; i++) { - unsigned long data; ch = &mic_dma_dev->mic_ch[i]; - data = (unsigned long)ch; ch->ch_num = i; ch->owner = owner; spin_lock_init(&ch->cleanup_lock); diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c index 23f75285a4d9..0cb951b743a6 100644 --- a/drivers/dma/mv_xor.c +++ b/drivers/dma/mv_xor.c @@ -68,6 +68,36 @@ static void mv_desc_init(struct mv_xor_desc_slot *desc, hw_desc->byte_count = byte_count; } +/* Populate the descriptor */ +static void mv_xor_config_sg_ll_desc(struct mv_xor_desc_slot *desc, + dma_addr_t dma_src, dma_addr_t dma_dst, + u32 len, struct mv_xor_desc_slot *prev) +{ + struct mv_xor_desc *hw_desc = desc->hw_desc; + + hw_desc->status = XOR_DESC_DMA_OWNED; + hw_desc->phy_next_desc = 0; + /* Configure for XOR with only one src address -> MEMCPY */ + hw_desc->desc_command = XOR_DESC_OPERATION_XOR | (0x1 << 0); + hw_desc->phy_dest_addr = dma_dst; + hw_desc->phy_src_addr[0] = dma_src; + hw_desc->byte_count = len; + + if (prev) { + struct mv_xor_desc *hw_prev = prev->hw_desc; + + hw_prev->phy_next_desc = desc->async_tx.phys; + } +} + +static void mv_xor_desc_config_eod(struct mv_xor_desc_slot *desc) +{ + struct mv_xor_desc *hw_desc = desc->hw_desc; + + /* Enable end-of-descriptor interrupt */ + hw_desc->desc_command |= XOR_DESC_EOD_INT_EN; +} + static void mv_desc_set_mode(struct mv_xor_desc_slot *desc) { struct mv_xor_desc *hw_desc = desc->hw_desc; @@ -228,8 +258,13 @@ mv_chan_clean_completed_slots(struct mv_xor_chan *mv_chan) list_for_each_entry_safe(iter, _iter, &mv_chan->completed_slots, node) { - if (async_tx_test_ack(&iter->async_tx)) + if (async_tx_test_ack(&iter->async_tx)) { list_move_tail(&iter->node, &mv_chan->free_slots); + if (!list_empty(&iter->sg_tx_list)) { + list_splice_tail_init(&iter->sg_tx_list, + &mv_chan->free_slots); + } + } } return 0; } @@ -244,11 +279,20 @@ mv_desc_clean_slot(struct mv_xor_desc_slot *desc, /* the client is allowed to attach dependent operations * until 'ack' is set */ - if (!async_tx_test_ack(&desc->async_tx)) + if (!async_tx_test_ack(&desc->async_tx)) { /* move this slot to the completed_slots */ list_move_tail(&desc->node, &mv_chan->completed_slots); - else + if (!list_empty(&desc->sg_tx_list)) { + list_splice_tail_init(&desc->sg_tx_list, + &mv_chan->completed_slots); + } + } else { list_move_tail(&desc->node, &mv_chan->free_slots); + if (!list_empty(&desc->sg_tx_list)) { + list_splice_tail_init(&desc->sg_tx_list, + &mv_chan->free_slots); + } + } return 0; } @@ -450,6 +494,7 @@ static int mv_xor_alloc_chan_resources(struct dma_chan *chan) dma_async_tx_descriptor_init(&slot->async_tx, chan); slot->async_tx.tx_submit = mv_xor_tx_submit; INIT_LIST_HEAD(&slot->node); + INIT_LIST_HEAD(&slot->sg_tx_list); dma_desc = mv_chan->dma_desc_pool; slot->async_tx.phys = dma_desc + idx * MV_XOR_SLOT_SIZE; slot->idx = idx++; @@ -617,6 +662,132 @@ mv_xor_prep_dma_interrupt(struct dma_chan *chan, unsigned long flags) return mv_xor_prep_dma_xor(chan, dest, &src, 1, len, flags); } +/** + * mv_xor_prep_dma_sg - prepare descriptors for a memory sg transaction + * @chan: DMA channel + * @dst_sg: Destination scatter list + * @dst_sg_len: Number of entries in destination scatter list + * @src_sg: Source scatter list + * @src_sg_len: Number of entries in source scatter list + * @flags: transfer ack flags + * + * Return: Async transaction descriptor on success and NULL on failure + */ +static struct dma_async_tx_descriptor * +mv_xor_prep_dma_sg(struct dma_chan *chan, struct scatterlist *dst_sg, + unsigned int dst_sg_len, struct scatterlist *src_sg, + unsigned int src_sg_len, unsigned long flags) +{ + struct mv_xor_chan *mv_chan = to_mv_xor_chan(chan); + struct mv_xor_desc_slot *new; + struct mv_xor_desc_slot *first = NULL; + struct mv_xor_desc_slot *prev = NULL; + size_t len, dst_avail, src_avail; + dma_addr_t dma_dst, dma_src; + int desc_cnt = 0; + int ret; + + dev_dbg(mv_chan_to_devp(mv_chan), + "%s dst_sg_len: %d src_sg_len: %d flags: %ld\n", + __func__, dst_sg_len, src_sg_len, flags); + + dst_avail = sg_dma_len(dst_sg); + src_avail = sg_dma_len(src_sg); + + /* Run until we are out of scatterlist entries */ + while (true) { + /* Allocate and populate the descriptor */ + desc_cnt++; + new = mv_chan_alloc_slot(mv_chan); + if (!new) { + dev_err(mv_chan_to_devp(mv_chan), + "Out of descriptors (desc_cnt=%d)!\n", + desc_cnt); + goto err; + } + + len = min_t(size_t, src_avail, dst_avail); + len = min_t(size_t, len, MV_XOR_MAX_BYTE_COUNT); + if (len == 0) + goto fetch; + + if (len < MV_XOR_MIN_BYTE_COUNT) { + dev_err(mv_chan_to_devp(mv_chan), + "Transfer size of %zu too small!\n", len); + goto err; + } + + dma_dst = sg_dma_address(dst_sg) + sg_dma_len(dst_sg) - + dst_avail; + dma_src = sg_dma_address(src_sg) + sg_dma_len(src_sg) - + src_avail; + + /* Check if a new window needs to get added for 'dst' */ + ret = mv_xor_add_io_win(mv_chan, dma_dst); + if (ret) + goto err; + + /* Check if a new window needs to get added for 'src' */ + ret = mv_xor_add_io_win(mv_chan, dma_src); + if (ret) + goto err; + + /* Populate the descriptor */ + mv_xor_config_sg_ll_desc(new, dma_src, dma_dst, len, prev); + prev = new; + dst_avail -= len; + src_avail -= len; + + if (!first) + first = new; + else + list_move_tail(&new->node, &first->sg_tx_list); + +fetch: + /* Fetch the next dst scatterlist entry */ + if (dst_avail == 0) { + if (dst_sg_len == 0) + break; + + /* Fetch the next entry: if there are no more: done */ + dst_sg = sg_next(dst_sg); + if (dst_sg == NULL) + break; + + dst_sg_len--; + dst_avail = sg_dma_len(dst_sg); + } + + /* Fetch the next src scatterlist entry */ + if (src_avail == 0) { + if (src_sg_len == 0) + break; + + /* Fetch the next entry: if there are no more: done */ + src_sg = sg_next(src_sg); + if (src_sg == NULL) + break; + + src_sg_len--; + src_avail = sg_dma_len(src_sg); + } + } + + /* Set the EOD flag in the last descriptor */ + mv_xor_desc_config_eod(new); + first->async_tx.flags = flags; + + return &first->async_tx; + +err: + /* Cleanup: Move all descriptors back into the free list */ + spin_lock_bh(&mv_chan->lock); + mv_desc_clean_slot(first, mv_chan); + spin_unlock_bh(&mv_chan->lock); + + return NULL; +} + static void mv_xor_free_chan_resources(struct dma_chan *chan) { struct mv_xor_chan *mv_chan = to_mv_xor_chan(chan); @@ -1083,6 +1254,8 @@ mv_xor_channel_add(struct mv_xor_device *xordev, dma_dev->device_prep_dma_interrupt = mv_xor_prep_dma_interrupt; if (dma_has_cap(DMA_MEMCPY, dma_dev->cap_mask)) dma_dev->device_prep_dma_memcpy = mv_xor_prep_dma_memcpy; + if (dma_has_cap(DMA_SG, dma_dev->cap_mask)) + dma_dev->device_prep_dma_sg = mv_xor_prep_dma_sg; if (dma_has_cap(DMA_XOR, dma_dev->cap_mask)) { dma_dev->max_xor = 8; dma_dev->device_prep_dma_xor = mv_xor_prep_dma_xor; @@ -1132,10 +1305,11 @@ mv_xor_channel_add(struct mv_xor_device *xordev, goto err_free_irq; } - dev_info(&pdev->dev, "Marvell XOR (%s): ( %s%s%s)\n", + dev_info(&pdev->dev, "Marvell XOR (%s): ( %s%s%s%s)\n", mv_chan->op_in_desc ? "Descriptor Mode" : "Registers Mode", dma_has_cap(DMA_XOR, dma_dev->cap_mask) ? "xor " : "", dma_has_cap(DMA_MEMCPY, dma_dev->cap_mask) ? "cpy " : "", + dma_has_cap(DMA_SG, dma_dev->cap_mask) ? "sg " : "", dma_has_cap(DMA_INTERRUPT, dma_dev->cap_mask) ? "intr " : ""); dma_async_device_register(dma_dev); @@ -1378,6 +1552,7 @@ static int mv_xor_probe(struct platform_device *pdev) dma_cap_zero(cap_mask); dma_cap_set(DMA_MEMCPY, cap_mask); + dma_cap_set(DMA_SG, cap_mask); dma_cap_set(DMA_XOR, cap_mask); dma_cap_set(DMA_INTERRUPT, cap_mask); @@ -1455,12 +1630,7 @@ static struct platform_driver mv_xor_driver = { }, }; - -static int __init mv_xor_init(void) -{ - return platform_driver_register(&mv_xor_driver); -} -device_initcall(mv_xor_init); +builtin_platform_driver(mv_xor_driver); /* MODULE_AUTHOR("Saeed Bishara <saeed@marvell.com>"); diff --git a/drivers/dma/mv_xor.h b/drivers/dma/mv_xor.h index 88eeab222a23..cf921dd6af73 100644 --- a/drivers/dma/mv_xor.h +++ b/drivers/dma/mv_xor.h @@ -148,6 +148,7 @@ struct mv_xor_chan { */ struct mv_xor_desc_slot { struct list_head node; + struct list_head sg_tx_list; enum dma_transaction_type type; void *hw_desc; u16 idx; diff --git a/drivers/dma/nbpfaxi.c b/drivers/dma/nbpfaxi.c index 09de71519d37..3f45b9bdf201 100644 --- a/drivers/dma/nbpfaxi.c +++ b/drivers/dma/nbpfaxi.c @@ -225,6 +225,8 @@ struct nbpf_channel { struct nbpf_device { struct dma_device dma_dev; void __iomem *base; + u32 max_burst_mem_read; + u32 max_burst_mem_write; struct clk *clk; const struct nbpf_config *config; unsigned int eirq; @@ -425,10 +427,33 @@ static void nbpf_chan_configure(struct nbpf_channel *chan) nbpf_chan_write(chan, NBPF_CHAN_CFG, NBPF_CHAN_CFG_DMS | chan->dmarq_cfg); } -static u32 nbpf_xfer_ds(struct nbpf_device *nbpf, size_t size) +static u32 nbpf_xfer_ds(struct nbpf_device *nbpf, size_t size, + enum dma_transfer_direction direction) { + int max_burst = nbpf->config->buffer_size * 8; + + if (nbpf->max_burst_mem_read || nbpf->max_burst_mem_write) { + switch (direction) { + case DMA_MEM_TO_MEM: + max_burst = min_not_zero(nbpf->max_burst_mem_read, + nbpf->max_burst_mem_write); + break; + case DMA_MEM_TO_DEV: + if (nbpf->max_burst_mem_read) + max_burst = nbpf->max_burst_mem_read; + break; + case DMA_DEV_TO_MEM: + if (nbpf->max_burst_mem_write) + max_burst = nbpf->max_burst_mem_write; + break; + case DMA_DEV_TO_DEV: + default: + break; + } + } + /* Maximum supported bursts depend on the buffer size */ - return min_t(int, __ffs(size), ilog2(nbpf->config->buffer_size * 8)); + return min_t(int, __ffs(size), ilog2(max_burst)); } static size_t nbpf_xfer_size(struct nbpf_device *nbpf, @@ -458,7 +483,7 @@ static size_t nbpf_xfer_size(struct nbpf_device *nbpf, size = burst; } - return nbpf_xfer_ds(nbpf, size); + return nbpf_xfer_ds(nbpf, size, DMA_TRANS_NONE); } /* @@ -507,7 +532,7 @@ static int nbpf_prep_one(struct nbpf_link_desc *ldesc, * transfers we enable the SBE bit and terminate the transfer in our * .device_pause handler. */ - mem_xfer = nbpf_xfer_ds(chan->nbpf, size); + mem_xfer = nbpf_xfer_ds(chan->nbpf, size, direction); switch (direction) { case DMA_DEV_TO_MEM: @@ -1313,6 +1338,11 @@ static int nbpf_probe(struct platform_device *pdev) if (IS_ERR(nbpf->clk)) return PTR_ERR(nbpf->clk); + of_property_read_u32(np, "max-burst-mem-read", + &nbpf->max_burst_mem_read); + of_property_read_u32(np, "max-burst-mem-write", + &nbpf->max_burst_mem_write); + nbpf->config = cfg; for (i = 0; irqs < ARRAY_SIZE(irqbuf); i++) { diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c index 7ca27d4b1c54..ac68666cd3f4 100644 --- a/drivers/dma/omap-dma.c +++ b/drivers/dma/omap-dma.c @@ -166,6 +166,9 @@ enum { CSDP_DST_BURST_16 = 1 << 14, CSDP_DST_BURST_32 = 2 << 14, CSDP_DST_BURST_64 = 3 << 14, + CSDP_WRITE_NON_POSTED = 0 << 16, + CSDP_WRITE_POSTED = 1 << 16, + CSDP_WRITE_LAST_NON_POSTED = 2 << 16, CICR_TOUT_IE = BIT(0), /* OMAP1 only */ CICR_DROP_IE = BIT(1), @@ -422,7 +425,30 @@ static void omap_dma_start(struct omap_chan *c, struct omap_desc *d) c->running = true; } -static void omap_dma_stop(struct omap_chan *c) +static void omap_dma_drain_chan(struct omap_chan *c) +{ + int i; + u32 val; + + /* Wait for sDMA FIFO to drain */ + for (i = 0; ; i++) { + val = omap_dma_chan_read(c, CCR); + if (!(val & (CCR_RD_ACTIVE | CCR_WR_ACTIVE))) + break; + + if (i > 100) + break; + + udelay(5); + } + + if (val & (CCR_RD_ACTIVE | CCR_WR_ACTIVE)) + dev_err(c->vc.chan.device->dev, + "DMA drain did not complete on lch %d\n", + c->dma_ch); +} + +static int omap_dma_stop(struct omap_chan *c) { struct omap_dmadev *od = to_omap_dma_dev(c->vc.chan.device); uint32_t val; @@ -435,7 +461,6 @@ static void omap_dma_stop(struct omap_chan *c) val = omap_dma_chan_read(c, CCR); if (od->plat->errata & DMA_ERRATA_i541 && val & CCR_TRIGGER_SRC) { uint32_t sysconfig; - unsigned i; sysconfig = omap_dma_glbl_read(od, OCP_SYSCONFIG); val = sysconfig & ~DMA_SYSCONFIG_MIDLEMODE_MASK; @@ -446,27 +471,19 @@ static void omap_dma_stop(struct omap_chan *c) val &= ~CCR_ENABLE; omap_dma_chan_write(c, CCR, val); - /* Wait for sDMA FIFO to drain */ - for (i = 0; ; i++) { - val = omap_dma_chan_read(c, CCR); - if (!(val & (CCR_RD_ACTIVE | CCR_WR_ACTIVE))) - break; - - if (i > 100) - break; - - udelay(5); - } - - if (val & (CCR_RD_ACTIVE | CCR_WR_ACTIVE)) - dev_err(c->vc.chan.device->dev, - "DMA drain did not complete on lch %d\n", - c->dma_ch); + if (!(c->ccr & CCR_BUFFERING_DISABLE)) + omap_dma_drain_chan(c); omap_dma_glbl_write(od, OCP_SYSCONFIG, sysconfig); } else { + if (!(val & CCR_ENABLE)) + return -EINVAL; + val &= ~CCR_ENABLE; omap_dma_chan_write(c, CCR, val); + + if (!(c->ccr & CCR_BUFFERING_DISABLE)) + omap_dma_drain_chan(c); } mb(); @@ -481,8 +498,8 @@ static void omap_dma_stop(struct omap_chan *c) omap_dma_chan_write(c, CLNK_CTRL, val); } - c->running = false; + return 0; } static void omap_dma_start_sg(struct omap_chan *c, struct omap_desc *d) @@ -836,6 +853,8 @@ static enum dma_status omap_dma_tx_status(struct dma_chan *chan, } else { txstate->residue = 0; } + if (ret == DMA_IN_PROGRESS && c->paused) + ret = DMA_PAUSED; spin_unlock_irqrestore(&c->vc.lock, flags); return ret; @@ -865,15 +884,18 @@ static struct dma_async_tx_descriptor *omap_dma_prep_slave_sg( unsigned i, es, en, frame_bytes; bool ll_failed = false; u32 burst; + u32 port_window, port_window_bytes; if (dir == DMA_DEV_TO_MEM) { dev_addr = c->cfg.src_addr; dev_width = c->cfg.src_addr_width; burst = c->cfg.src_maxburst; + port_window = c->cfg.src_port_window_size; } else if (dir == DMA_MEM_TO_DEV) { dev_addr = c->cfg.dst_addr; dev_width = c->cfg.dst_addr_width; burst = c->cfg.dst_maxburst; + port_window = c->cfg.dst_port_window_size; } else { dev_err(chan->device->dev, "%s: bad direction?\n", __func__); return NULL; @@ -894,6 +916,12 @@ static struct dma_async_tx_descriptor *omap_dma_prep_slave_sg( return NULL; } + /* When the port_window is used, one frame must cover the window */ + if (port_window) { + burst = port_window; + port_window_bytes = port_window * es_bytes[es]; + } + /* Now allocate and setup the descriptor. */ d = kzalloc(sizeof(*d) + sglen * sizeof(d->sg[0]), GFP_ATOMIC); if (!d) @@ -905,11 +933,45 @@ static struct dma_async_tx_descriptor *omap_dma_prep_slave_sg( d->ccr = c->ccr | CCR_SYNC_FRAME; if (dir == DMA_DEV_TO_MEM) { - d->ccr |= CCR_DST_AMODE_POSTINC | CCR_SRC_AMODE_CONSTANT; d->csdp = CSDP_DST_BURST_64 | CSDP_DST_PACKED; + + d->ccr |= CCR_DST_AMODE_POSTINC; + if (port_window) { + d->ccr |= CCR_SRC_AMODE_DBLIDX; + d->ei = 1; + /* + * One frame covers the port_window and by configure + * the source frame index to be -1 * (port_window - 1) + * we instruct the sDMA that after a frame is processed + * it should move back to the start of the window. + */ + d->fi = -(port_window_bytes - 1); + + if (port_window_bytes >= 64) + d->csdp = CSDP_SRC_BURST_64 | CSDP_SRC_PACKED; + else if (port_window_bytes >= 32) + d->csdp = CSDP_SRC_BURST_32 | CSDP_SRC_PACKED; + else if (port_window_bytes >= 16) + d->csdp = CSDP_SRC_BURST_16 | CSDP_SRC_PACKED; + } else { + d->ccr |= CCR_SRC_AMODE_CONSTANT; + } } else { - d->ccr |= CCR_DST_AMODE_CONSTANT | CCR_SRC_AMODE_POSTINC; d->csdp = CSDP_SRC_BURST_64 | CSDP_SRC_PACKED; + + d->ccr |= CCR_SRC_AMODE_POSTINC; + if (port_window) { + d->ccr |= CCR_DST_AMODE_DBLIDX; + + if (port_window_bytes >= 64) + d->csdp = CSDP_DST_BURST_64 | CSDP_DST_PACKED; + else if (port_window_bytes >= 32) + d->csdp = CSDP_DST_BURST_32 | CSDP_DST_PACKED; + else if (port_window_bytes >= 16) + d->csdp = CSDP_DST_BURST_16 | CSDP_DST_PACKED; + } else { + d->ccr |= CCR_DST_AMODE_CONSTANT; + } } d->cicr = CICR_DROP_IE | CICR_BLOCK_IE; @@ -927,6 +989,9 @@ static struct dma_async_tx_descriptor *omap_dma_prep_slave_sg( d->ccr |= CCR_TRIGGER_SRC; d->cicr |= CICR_MISALIGNED_ERR_IE | CICR_TRANS_ERR_IE; + + if (port_window) + d->csdp |= CSDP_WRITE_LAST_NON_POSTED; } if (od->plat->errata & DMA_ERRATA_PARALLEL_CHANNELS) d->clnk_ctrl = c->dma_ch; @@ -952,6 +1017,16 @@ static struct dma_async_tx_descriptor *omap_dma_prep_slave_sg( osg->addr = sg_dma_address(sgent); osg->en = en; osg->fn = sg_dma_len(sgent) / frame_bytes; + if (port_window && dir == DMA_MEM_TO_DEV) { + osg->ei = 1; + /* + * One frame covers the port_window and by configure + * the source frame index to be -1 * (port_window - 1) + * we instruct the sDMA that after a frame is processed + * it should move back to the start of the window. + */ + osg->fi = -(port_window_bytes - 1); + } if (d->using_ll) { osg->t2_desc = dma_pool_alloc(od->desc_pool, GFP_ATOMIC, @@ -1247,10 +1322,8 @@ static int omap_dma_terminate_all(struct dma_chan *chan) omap_dma_stop(c); } - if (c->cyclic) { - c->cyclic = false; - c->paused = false; - } + c->cyclic = false; + c->paused = false; vchan_get_all_descriptors(&c->vc, &head); spin_unlock_irqrestore(&c->vc.lock, flags); @@ -1269,28 +1342,66 @@ static void omap_dma_synchronize(struct dma_chan *chan) static int omap_dma_pause(struct dma_chan *chan) { struct omap_chan *c = to_omap_dma_chan(chan); + struct omap_dmadev *od = to_omap_dma_dev(chan->device); + unsigned long flags; + int ret = -EINVAL; + bool can_pause = false; - /* Pause/Resume only allowed with cyclic mode */ - if (!c->cyclic) - return -EINVAL; + spin_lock_irqsave(&od->irq_lock, flags); - if (!c->paused) { - omap_dma_stop(c); - c->paused = true; + if (!c->desc) + goto out; + + if (c->cyclic) + can_pause = true; + + /* + * We do not allow DMA_MEM_TO_DEV transfers to be paused. + * From the AM572x TRM, 16.1.4.18 Disabling a Channel During Transfer: + * "When a channel is disabled during a transfer, the channel undergoes + * an abort, unless it is hardware-source-synchronized …". + * A source-synchronised channel is one where the fetching of data is + * under control of the device. In other words, a device-to-memory + * transfer. So, a destination-synchronised channel (which would be a + * memory-to-device transfer) undergoes an abort if the the CCR_ENABLE + * bit is cleared. + * From 16.1.4.20.4.6.2 Abort: "If an abort trigger occurs, the channel + * aborts immediately after completion of current read/write + * transactions and then the FIFO is cleaned up." The term "cleaned up" + * is not defined. TI recommends to check that RD_ACTIVE and WR_ACTIVE + * are both clear _before_ disabling the channel, otherwise data loss + * will occur. + * The problem is that if the channel is active, then device activity + * can result in DMA activity starting between reading those as both + * clear and the write to DMA_CCR to clear the enable bit hitting the + * hardware. If the DMA hardware can't drain the data in its FIFO to the + * destination, then data loss "might" occur (say if we write to an UART + * and the UART is not accepting any further data). + */ + else if (c->desc->dir == DMA_DEV_TO_MEM) + can_pause = true; + + if (can_pause && !c->paused) { + ret = omap_dma_stop(c); + if (!ret) + c->paused = true; } +out: + spin_unlock_irqrestore(&od->irq_lock, flags); - return 0; + return ret; } static int omap_dma_resume(struct dma_chan *chan) { struct omap_chan *c = to_omap_dma_chan(chan); + struct omap_dmadev *od = to_omap_dma_dev(chan->device); + unsigned long flags; + int ret = -EINVAL; - /* Pause/Resume only allowed with cyclic mode */ - if (!c->cyclic) - return -EINVAL; + spin_lock_irqsave(&od->irq_lock, flags); - if (c->paused) { + if (c->paused && c->desc) { mb(); /* Restore channel link register */ @@ -1298,9 +1409,11 @@ static int omap_dma_resume(struct dma_chan *chan) omap_dma_start(c, c->desc); c->paused = false; + ret = 0; } + spin_unlock_irqrestore(&od->irq_lock, flags); - return 0; + return ret; } static int omap_dma_chan_init(struct omap_dmadev *od) diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c index df95727dc2fb..f9028e9d0dfc 100644 --- a/drivers/dma/pch_dma.c +++ b/drivers/dma/pch_dma.c @@ -417,10 +417,8 @@ static dma_cookie_t pd_tx_submit(struct dma_async_tx_descriptor *txd) { struct pch_dma_desc *desc = to_pd_desc(txd); struct pch_dma_chan *pd_chan = to_pd_chan(txd->chan); - dma_cookie_t cookie; spin_lock(&pd_chan->lock); - cookie = dma_cookie_assign(txd); if (list_empty(&pd_chan->active_list)) { list_add_tail(&desc->desc_node, &pd_chan->active_list); @@ -439,9 +437,8 @@ static struct pch_dma_desc *pdc_alloc_desc(struct dma_chan *chan, gfp_t flags) struct pch_dma *pd = to_pd(chan->device); dma_addr_t addr; - desc = pci_pool_alloc(pd->pool, flags, &addr); + desc = pci_pool_zalloc(pd->pool, flags, &addr); if (desc) { - memset(desc, 0, sizeof(struct pch_dma_desc)); INIT_LIST_HEAD(&desc->tx_list); dma_async_tx_descriptor_init(&desc->txd, chan); desc->txd.tx_submit = pd_tx_submit; diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index 030fe05ed43b..87fd01539fcb 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -570,7 +570,8 @@ static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[], buf[0] = CMD_DMAADDH; buf[0] |= (da << 1); - *((__le16 *)&buf[1]) = cpu_to_le16(val); + buf[1] = val; + buf[2] = val >> 8; PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n", da == 1 ? "DA" : "SA", val); @@ -724,7 +725,10 @@ static inline u32 _emit_MOV(unsigned dry_run, u8 buf[], buf[0] = CMD_DMAMOV; buf[1] = dst; - *((__le32 *)&buf[2]) = cpu_to_le32(val); + buf[2] = val; + buf[3] = val >> 8; + buf[4] = val >> 16; + buf[5] = val >> 24; PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n", dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val); @@ -899,10 +903,11 @@ static inline u32 _emit_GO(unsigned dry_run, u8 buf[], buf[0] = CMD_DMAGO; buf[0] |= (ns << 1); - buf[1] = chan & 0x7; - - *((__le32 *)&buf[2]) = cpu_to_le32(addr); + buf[2] = addr; + buf[3] = addr >> 8; + buf[4] = addr >> 16; + buf[5] = addr >> 24; return SZ_DMAGO; } @@ -1883,11 +1888,8 @@ static int dmac_alloc_resources(struct pl330_dmac *pl330) static int pl330_add(struct pl330_dmac *pl330) { - void __iomem *regs; int i, ret; - regs = pl330->base; - /* Check if we can handle this DMAC */ if ((pl330->pcfg.periph_id & 0xfffff) != PERIPH_ID_VAL) { dev_err(pl330->ddma.dev, "PERIPH_ID 0x%x !\n", @@ -2263,6 +2265,11 @@ static int pl330_get_current_xferred_count(struct dma_pl330_chan *pch, } pm_runtime_mark_last_busy(pch->dmac->ddma.dev); pm_runtime_put_autosuspend(pl330->ddma.dev); + + /* If DMAMOV hasn't finished yet, SAR/DAR can be zero */ + if (!val) + return 0; + return val - addr; } diff --git a/drivers/dma/pxa_dma.c b/drivers/dma/pxa_dma.c index 3f56f9ca4482..b53fb618bbf6 100644 --- a/drivers/dma/pxa_dma.c +++ b/drivers/dma/pxa_dma.c @@ -413,15 +413,6 @@ static inline void pxad_init_debugfs(struct pxad_device *pdev) {} static inline void pxad_cleanup_debugfs(struct pxad_device *pdev) {} #endif -/* - * In the transition phase where legacy pxa handling is done at the same time as - * mmp_dma, the DMA physical channel split between the 2 DMA providers is done - * through legacy_reserved. Legacy code reserves DMA channels by settings - * corresponding bits in legacy_reserved. - */ -static u32 legacy_reserved; -static u32 legacy_unavailable; - static struct pxad_phy *lookup_phy(struct pxad_chan *pchan) { int prio, i; @@ -442,14 +433,10 @@ static struct pxad_phy *lookup_phy(struct pxad_chan *pchan) for (i = 0; i < pdev->nr_chans; i++) { if (prio != (i & 0xf) >> 2) continue; - if ((i < 32) && (legacy_reserved & BIT(i))) - continue; phy = &pdev->phys[i]; if (!phy->vchan) { phy->vchan = pchan; found = phy; - if (i < 32) - legacy_unavailable |= BIT(i); goto out_unlock; } } @@ -469,7 +456,6 @@ static void pxad_free_phy(struct pxad_chan *chan) struct pxad_device *pdev = to_pxad_dev(chan->vc.chan.device); unsigned long flags; u32 reg; - int i; dev_dbg(&chan->vc.chan.dev->device, "%s(): freeing\n", __func__); @@ -483,9 +469,6 @@ static void pxad_free_phy(struct pxad_chan *chan) } spin_lock_irqsave(&pdev->phy_lock, flags); - for (i = 0; i < 32; i++) - if (chan->phy == &pdev->phys[i]) - legacy_unavailable &= ~BIT(i); chan->phy->vchan = NULL; chan->phy = NULL; spin_unlock_irqrestore(&pdev->phy_lock, flags); @@ -739,8 +722,6 @@ static irqreturn_t pxad_int_handler(int irq, void *dev_id) i = __ffs(dint); dint &= (dint - 1); phy = &pdev->phys[i]; - if ((i < 32) && (legacy_reserved & BIT(i))) - continue; if (pxad_chan_handler(irq, phy) == IRQ_HANDLED) ret = IRQ_HANDLED; } @@ -1522,15 +1503,6 @@ bool pxad_filter_fn(struct dma_chan *chan, void *param) } EXPORT_SYMBOL_GPL(pxad_filter_fn); -int pxad_toggle_reserved_channel(int legacy_channel) -{ - if (legacy_unavailable & (BIT(legacy_channel))) - return -EBUSY; - legacy_reserved ^= BIT(legacy_channel); - return 0; -} -EXPORT_SYMBOL_GPL(pxad_toggle_reserved_channel); - module_platform_driver(pxad_driver); MODULE_DESCRIPTION("Marvell PXA Peripheral DMA Driver"); diff --git a/drivers/dma/qcom/hidma.c b/drivers/dma/qcom/hidma.c index e244e10a94b5..3c982c96b4b7 100644 --- a/drivers/dma/qcom/hidma.c +++ b/drivers/dma/qcom/hidma.c @@ -56,6 +56,7 @@ #include <linux/irq.h> #include <linux/atomic.h> #include <linux/pm_runtime.h> +#include <linux/msi.h> #include "../dmaengine.h" #include "hidma.h" @@ -70,6 +71,7 @@ #define HIDMA_ERR_INFO_SW 0xFF #define HIDMA_ERR_CODE_UNEXPECTED_TERMINATE 0x0 #define HIDMA_NR_DEFAULT_DESC 10 +#define HIDMA_MSI_INTS 11 static inline struct hidma_dev *to_hidma_dev(struct dma_device *dmadev) { @@ -553,6 +555,17 @@ static irqreturn_t hidma_chirq_handler(int chirq, void *arg) return hidma_ll_inthandler(chirq, lldev); } +#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN +static irqreturn_t hidma_chirq_handler_msi(int chirq, void *arg) +{ + struct hidma_lldev **lldevp = arg; + struct hidma_dev *dmadev = to_hidma_dev_from_lldev(lldevp); + + return hidma_ll_inthandler_msi(chirq, *lldevp, + 1 << (chirq - dmadev->msi_virqbase)); +} +#endif + static ssize_t hidma_show_values(struct device *dev, struct device_attribute *attr, char *buf) { @@ -567,8 +580,13 @@ static ssize_t hidma_show_values(struct device *dev, return strlen(buf); } -static int hidma_create_sysfs_entry(struct hidma_dev *dev, char *name, - int mode) +static inline void hidma_sysfs_uninit(struct hidma_dev *dev) +{ + device_remove_file(dev->ddev.dev, dev->chid_attrs); +} + +static struct device_attribute* +hidma_create_sysfs_entry(struct hidma_dev *dev, char *name, int mode) { struct device_attribute *attrs; char *name_copy; @@ -576,18 +594,125 @@ static int hidma_create_sysfs_entry(struct hidma_dev *dev, char *name, attrs = devm_kmalloc(dev->ddev.dev, sizeof(struct device_attribute), GFP_KERNEL); if (!attrs) - return -ENOMEM; + return NULL; name_copy = devm_kstrdup(dev->ddev.dev, name, GFP_KERNEL); if (!name_copy) - return -ENOMEM; + return NULL; attrs->attr.name = name_copy; attrs->attr.mode = mode; attrs->show = hidma_show_values; sysfs_attr_init(&attrs->attr); - return device_create_file(dev->ddev.dev, attrs); + return attrs; +} + +static int hidma_sysfs_init(struct hidma_dev *dev) +{ + dev->chid_attrs = hidma_create_sysfs_entry(dev, "chid", S_IRUGO); + if (!dev->chid_attrs) + return -ENOMEM; + + return device_create_file(dev->ddev.dev, dev->chid_attrs); +} + +#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN +static void hidma_write_msi_msg(struct msi_desc *desc, struct msi_msg *msg) +{ + struct device *dev = msi_desc_to_dev(desc); + struct hidma_dev *dmadev = dev_get_drvdata(dev); + + if (!desc->platform.msi_index) { + writel(msg->address_lo, dmadev->dev_evca + 0x118); + writel(msg->address_hi, dmadev->dev_evca + 0x11C); + writel(msg->data, dmadev->dev_evca + 0x120); + } +} +#endif + +static void hidma_free_msis(struct hidma_dev *dmadev) +{ +#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN + struct device *dev = dmadev->ddev.dev; + struct msi_desc *desc; + + /* free allocated MSI interrupts above */ + for_each_msi_entry(desc, dev) + devm_free_irq(dev, desc->irq, &dmadev->lldev); + + platform_msi_domain_free_irqs(dev); +#endif +} + +static int hidma_request_msi(struct hidma_dev *dmadev, + struct platform_device *pdev) +{ +#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN + int rc; + struct msi_desc *desc; + struct msi_desc *failed_desc = NULL; + + rc = platform_msi_domain_alloc_irqs(&pdev->dev, HIDMA_MSI_INTS, + hidma_write_msi_msg); + if (rc) + return rc; + + for_each_msi_entry(desc, &pdev->dev) { + if (!desc->platform.msi_index) + dmadev->msi_virqbase = desc->irq; + + rc = devm_request_irq(&pdev->dev, desc->irq, + hidma_chirq_handler_msi, + 0, "qcom-hidma-msi", + &dmadev->lldev); + if (rc) { + failed_desc = desc; + break; + } + } + + if (rc) { + /* free allocated MSI interrupts above */ + for_each_msi_entry(desc, &pdev->dev) { + if (desc == failed_desc) + break; + devm_free_irq(&pdev->dev, desc->irq, + &dmadev->lldev); + } + } else { + /* Add callback to free MSIs on teardown */ + hidma_ll_setup_irq(dmadev->lldev, true); + + } + if (rc) + dev_warn(&pdev->dev, + "failed to request MSI irq, falling back to wired IRQ\n"); + return rc; +#else + return -EINVAL; +#endif +} + +static bool hidma_msi_capable(struct device *dev) +{ + struct acpi_device *adev = ACPI_COMPANION(dev); + const char *of_compat; + int ret = -EINVAL; + + if (!adev || acpi_disabled) { + ret = device_property_read_string(dev, "compatible", + &of_compat); + if (ret) + return false; + + ret = strcmp(of_compat, "qcom,hidma-1.1"); + } else { +#ifdef CONFIG_ACPI + ret = strcmp(acpi_device_hid(adev), "QCOM8062"); +#endif + } + return ret == 0; } static int hidma_probe(struct platform_device *pdev) @@ -599,6 +724,7 @@ static int hidma_probe(struct platform_device *pdev) void __iomem *evca; void __iomem *trca; int rc; + bool msi; pm_runtime_set_autosuspend_delay(&pdev->dev, HIDMA_AUTOSUSPEND_TIMEOUT); pm_runtime_use_autosuspend(&pdev->dev); @@ -660,6 +786,12 @@ static int hidma_probe(struct platform_device *pdev) dmadev->ddev.device_terminate_all = hidma_terminate_all; dmadev->ddev.copy_align = 8; + /* + * Determine the MSI capability of the platform. Old HW doesn't + * support MSI. + */ + msi = hidma_msi_capable(&pdev->dev); + device_property_read_u32(&pdev->dev, "desc-count", &dmadev->nr_descriptors); @@ -688,10 +820,17 @@ static int hidma_probe(struct platform_device *pdev) goto dmafree; } - rc = devm_request_irq(&pdev->dev, chirq, hidma_chirq_handler, 0, - "qcom-hidma", dmadev->lldev); - if (rc) - goto uninit; + platform_set_drvdata(pdev, dmadev); + if (msi) + rc = hidma_request_msi(dmadev, pdev); + + if (!msi || rc) { + hidma_ll_setup_irq(dmadev->lldev, false); + rc = devm_request_irq(&pdev->dev, chirq, hidma_chirq_handler, + 0, "qcom-hidma", dmadev->lldev); + if (rc) + goto uninit; + } INIT_LIST_HEAD(&dmadev->ddev.channels); rc = hidma_chan_init(dmadev, 0); @@ -705,14 +844,16 @@ static int hidma_probe(struct platform_device *pdev) dmadev->irq = chirq; tasklet_init(&dmadev->task, hidma_issue_task, (unsigned long)dmadev); hidma_debug_init(dmadev); - hidma_create_sysfs_entry(dmadev, "chid", S_IRUGO); + hidma_sysfs_init(dmadev); dev_info(&pdev->dev, "HI-DMA engine driver registration complete\n"); - platform_set_drvdata(pdev, dmadev); pm_runtime_mark_last_busy(dmadev->ddev.dev); pm_runtime_put_autosuspend(dmadev->ddev.dev); return 0; uninit: + if (msi) + hidma_free_msis(dmadev); + hidma_debug_uninit(dmadev); hidma_ll_uninit(dmadev->lldev); dmafree: @@ -730,8 +871,13 @@ static int hidma_remove(struct platform_device *pdev) pm_runtime_get_sync(dmadev->ddev.dev); dma_async_device_unregister(&dmadev->ddev); - devm_free_irq(dmadev->ddev.dev, dmadev->irq, dmadev->lldev); + if (!dmadev->lldev->msi_support) + devm_free_irq(dmadev->ddev.dev, dmadev->irq, dmadev->lldev); + else + hidma_free_msis(dmadev); + tasklet_kill(&dmadev->task); + hidma_sysfs_uninit(dmadev); hidma_debug_uninit(dmadev); hidma_ll_uninit(dmadev->lldev); hidma_free(dmadev); @@ -746,12 +892,15 @@ static int hidma_remove(struct platform_device *pdev) #if IS_ENABLED(CONFIG_ACPI) static const struct acpi_device_id hidma_acpi_ids[] = { {"QCOM8061"}, + {"QCOM8062"}, {}, }; +MODULE_DEVICE_TABLE(acpi, hidma_acpi_ids); #endif static const struct of_device_id hidma_match[] = { {.compatible = "qcom,hidma-1.0",}, + {.compatible = "qcom,hidma-1.1",}, {}, }; MODULE_DEVICE_TABLE(of, hidma_match); diff --git a/drivers/dma/qcom/hidma.h b/drivers/dma/qcom/hidma.h index e52e20716303..c7d014235c32 100644 --- a/drivers/dma/qcom/hidma.h +++ b/drivers/dma/qcom/hidma.h @@ -46,6 +46,7 @@ struct hidma_tre { }; struct hidma_lldev { + bool msi_support; /* flag indicating MSI support */ bool initialized; /* initialized flag */ u8 trch_state; /* trch_state of the device */ u8 evch_state; /* evch_state of the device */ @@ -58,7 +59,7 @@ struct hidma_lldev { void __iomem *evca; /* Event Channel address */ struct hidma_tre **pending_tre_list; /* Pointers to pending TREs */ - s32 pending_tre_count; /* Number of TREs pending */ + atomic_t pending_tre_count; /* Number of TREs pending */ void *tre_ring; /* TRE ring */ dma_addr_t tre_dma; /* TRE ring to be shared with HW */ @@ -114,6 +115,7 @@ struct hidma_dev { int irq; int chidx; u32 nr_descriptors; + int msi_virqbase; struct hidma_lldev *lldev; void __iomem *dev_trca; @@ -128,6 +130,9 @@ struct hidma_dev { struct dentry *debugfs; struct dentry *stats; + /* sysfs entry for the channel id */ + struct device_attribute *chid_attrs; + /* Task delivering issue_pending */ struct tasklet_struct task; }; @@ -145,12 +150,14 @@ int hidma_ll_disable(struct hidma_lldev *lldev); int hidma_ll_enable(struct hidma_lldev *llhndl); void hidma_ll_set_transfer_params(struct hidma_lldev *llhndl, u32 tre_ch, dma_addr_t src, dma_addr_t dest, u32 len, u32 flags); +void hidma_ll_setup_irq(struct hidma_lldev *lldev, bool msi); int hidma_ll_setup(struct hidma_lldev *lldev); struct hidma_lldev *hidma_ll_init(struct device *dev, u32 max_channels, void __iomem *trca, void __iomem *evca, u8 chidx); int hidma_ll_uninit(struct hidma_lldev *llhndl); irqreturn_t hidma_ll_inthandler(int irq, void *arg); +irqreturn_t hidma_ll_inthandler_msi(int irq, void *arg, int cause); void hidma_cleanup_pending_tre(struct hidma_lldev *llhndl, u8 err_info, u8 err_code); int hidma_debug_init(struct hidma_dev *dmadev); diff --git a/drivers/dma/qcom/hidma_dbg.c b/drivers/dma/qcom/hidma_dbg.c index fa827e5ffd68..3bdcb8056a36 100644 --- a/drivers/dma/qcom/hidma_dbg.c +++ b/drivers/dma/qcom/hidma_dbg.c @@ -74,7 +74,8 @@ static void hidma_ll_devstats(struct seq_file *s, void *llhndl) seq_printf(s, "tre_ring_handle=%pap\n", &lldev->tre_dma); seq_printf(s, "tre_ring_size = 0x%x\n", lldev->tre_ring_size); seq_printf(s, "tre_processed_off = 0x%x\n", lldev->tre_processed_off); - seq_printf(s, "pending_tre_count=%d\n", lldev->pending_tre_count); + seq_printf(s, "pending_tre_count=%d\n", + atomic_read(&lldev->pending_tre_count)); seq_printf(s, "evca=%p\n", lldev->evca); seq_printf(s, "evre_ring=%p\n", lldev->evre_ring); seq_printf(s, "evre_ring_handle=%pap\n", &lldev->evre_dma); @@ -164,7 +165,6 @@ static const struct file_operations hidma_dma_fops = { void hidma_debug_uninit(struct hidma_dev *dmadev) { debugfs_remove_recursive(dmadev->debugfs); - debugfs_remove_recursive(dmadev->stats); } int hidma_debug_init(struct hidma_dev *dmadev) diff --git a/drivers/dma/qcom/hidma_ll.c b/drivers/dma/qcom/hidma_ll.c index 3224f24c577b..6645bdf0d151 100644 --- a/drivers/dma/qcom/hidma_ll.c +++ b/drivers/dma/qcom/hidma_ll.c @@ -198,13 +198,16 @@ static void hidma_ll_tre_complete(unsigned long arg) } } -static int hidma_post_completed(struct hidma_lldev *lldev, int tre_iterator, - u8 err_info, u8 err_code) +static int hidma_post_completed(struct hidma_lldev *lldev, u8 err_info, + u8 err_code) { struct hidma_tre *tre; unsigned long flags; + u32 tre_iterator; spin_lock_irqsave(&lldev->lock, flags); + + tre_iterator = lldev->tre_processed_off; tre = lldev->pending_tre_list[tre_iterator / HIDMA_TRE_SIZE]; if (!tre) { spin_unlock_irqrestore(&lldev->lock, flags); @@ -218,12 +221,14 @@ static int hidma_post_completed(struct hidma_lldev *lldev, int tre_iterator, * Keep track of pending TREs that SW is expecting to receive * from HW. We got one now. Decrement our counter. */ - lldev->pending_tre_count--; - if (lldev->pending_tre_count < 0) { + if (atomic_dec_return(&lldev->pending_tre_count) < 0) { dev_warn(lldev->dev, "tre count mismatch on completion"); - lldev->pending_tre_count = 0; + atomic_set(&lldev->pending_tre_count, 0); } + HIDMA_INCREMENT_ITERATOR(tre_iterator, HIDMA_TRE_SIZE, + lldev->tre_ring_size); + lldev->tre_processed_off = tre_iterator; spin_unlock_irqrestore(&lldev->lock, flags); tre->err_info = err_info; @@ -245,13 +250,11 @@ static int hidma_post_completed(struct hidma_lldev *lldev, int tre_iterator, static int hidma_handle_tre_completion(struct hidma_lldev *lldev) { u32 evre_ring_size = lldev->evre_ring_size; - u32 tre_ring_size = lldev->tre_ring_size; u32 err_info, err_code, evre_write_off; - u32 tre_iterator, evre_iterator; + u32 evre_iterator; u32 num_completed = 0; evre_write_off = readl_relaxed(lldev->evca + HIDMA_EVCA_WRITE_PTR_REG); - tre_iterator = lldev->tre_processed_off; evre_iterator = lldev->evre_processed_off; if ((evre_write_off > evre_ring_size) || @@ -274,12 +277,9 @@ static int hidma_handle_tre_completion(struct hidma_lldev *lldev) err_code = (cfg >> HIDMA_EVRE_CODE_BIT_POS) & HIDMA_EVRE_CODE_MASK; - if (hidma_post_completed(lldev, tre_iterator, err_info, - err_code)) + if (hidma_post_completed(lldev, err_info, err_code)) break; - HIDMA_INCREMENT_ITERATOR(tre_iterator, HIDMA_TRE_SIZE, - tre_ring_size); HIDMA_INCREMENT_ITERATOR(evre_iterator, HIDMA_EVRE_SIZE, evre_ring_size); @@ -291,21 +291,22 @@ static int hidma_handle_tre_completion(struct hidma_lldev *lldev) evre_write_off = readl_relaxed(lldev->evca + HIDMA_EVCA_WRITE_PTR_REG); num_completed++; + + /* + * An error interrupt might have arrived while we are processing + * the completed interrupt. + */ + if (!hidma_ll_isenabled(lldev)) + break; } if (num_completed) { u32 evre_read_off = (lldev->evre_processed_off + HIDMA_EVRE_SIZE * num_completed); - u32 tre_read_off = (lldev->tre_processed_off + - HIDMA_TRE_SIZE * num_completed); - evre_read_off = evre_read_off % evre_ring_size; - tre_read_off = tre_read_off % tre_ring_size; - writel(evre_read_off, lldev->evca + HIDMA_EVCA_DOORBELL_REG); /* record the last processed tre offset */ - lldev->tre_processed_off = tre_read_off; lldev->evre_processed_off = evre_read_off; } @@ -315,27 +316,10 @@ static int hidma_handle_tre_completion(struct hidma_lldev *lldev) void hidma_cleanup_pending_tre(struct hidma_lldev *lldev, u8 err_info, u8 err_code) { - u32 tre_iterator; - u32 tre_ring_size = lldev->tre_ring_size; - int num_completed = 0; - u32 tre_read_off; - - tre_iterator = lldev->tre_processed_off; - while (lldev->pending_tre_count) { - if (hidma_post_completed(lldev, tre_iterator, err_info, - err_code)) + while (atomic_read(&lldev->pending_tre_count)) { + if (hidma_post_completed(lldev, err_info, err_code)) break; - HIDMA_INCREMENT_ITERATOR(tre_iterator, HIDMA_TRE_SIZE, - tre_ring_size); - num_completed++; } - tre_read_off = (lldev->tre_processed_off + - HIDMA_TRE_SIZE * num_completed); - - tre_read_off = tre_read_off % tre_ring_size; - - /* record the last processed tre offset */ - lldev->tre_processed_off = tre_read_off; } static int hidma_ll_reset(struct hidma_lldev *lldev) @@ -412,12 +396,24 @@ static int hidma_ll_reset(struct hidma_lldev *lldev) * requests traditionally to the destination, this concept does not apply * here for this HW. */ -irqreturn_t hidma_ll_inthandler(int chirq, void *arg) +static void hidma_ll_int_handler_internal(struct hidma_lldev *lldev, int cause) { - struct hidma_lldev *lldev = arg; - u32 status; - u32 enable; - u32 cause; + if (cause & HIDMA_ERR_INT_MASK) { + dev_err(lldev->dev, "error 0x%x, disabling...\n", + cause); + + /* Clear out pending interrupts */ + writel(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG); + + /* No further submissions. */ + hidma_ll_disable(lldev); + + /* Driver completes the txn and intimates the client.*/ + hidma_cleanup_pending_tre(lldev, 0xFF, + HIDMA_EVRE_STATUS_ERROR); + + return; + } /* * Fine tuned for this HW... @@ -426,35 +422,28 @@ irqreturn_t hidma_ll_inthandler(int chirq, void *arg) * read and write accessors are used for performance reasons due to * interrupt delivery guarantees. Do not copy this code blindly and * expect that to work. + * + * Try to consume as many EVREs as possible. */ + hidma_handle_tre_completion(lldev); + + /* We consumed TREs or there are pending TREs or EVREs. */ + writel_relaxed(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG); +} + +irqreturn_t hidma_ll_inthandler(int chirq, void *arg) +{ + struct hidma_lldev *lldev = arg; + u32 status; + u32 enable; + u32 cause; + status = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG); enable = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_EN_REG); cause = status & enable; while (cause) { - if (cause & HIDMA_ERR_INT_MASK) { - dev_err(lldev->dev, "error 0x%x, disabling...\n", - cause); - - /* Clear out pending interrupts */ - writel(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG); - - /* No further submissions. */ - hidma_ll_disable(lldev); - - /* Driver completes the txn and intimates the client.*/ - hidma_cleanup_pending_tre(lldev, 0xFF, - HIDMA_EVRE_STATUS_ERROR); - goto out; - } - - /* - * Try to consume as many EVREs as possible. - */ - hidma_handle_tre_completion(lldev); - - /* We consumed TREs or there are pending TREs or EVREs. */ - writel_relaxed(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG); + hidma_ll_int_handler_internal(lldev, cause); /* * Another interrupt might have arrived while we are @@ -465,7 +454,14 @@ irqreturn_t hidma_ll_inthandler(int chirq, void *arg) cause = status & enable; } -out: + return IRQ_HANDLED; +} + +irqreturn_t hidma_ll_inthandler_msi(int chirq, void *arg, int cause) +{ + struct hidma_lldev *lldev = arg; + + hidma_ll_int_handler_internal(lldev, cause); return IRQ_HANDLED; } @@ -548,7 +544,7 @@ void hidma_ll_queue_request(struct hidma_lldev *lldev, u32 tre_ch) tre->err_code = 0; tre->err_info = 0; tre->queued = 1; - lldev->pending_tre_count++; + atomic_inc(&lldev->pending_tre_count); lldev->tre_write_offset = (lldev->tre_write_offset + HIDMA_TRE_SIZE) % lldev->tre_ring_size; spin_unlock_irqrestore(&lldev->lock, flags); @@ -564,19 +560,8 @@ int hidma_ll_disable(struct hidma_lldev *lldev) u32 val; int ret; - val = readl(lldev->evca + HIDMA_EVCA_CTRLSTS_REG); - lldev->evch_state = HIDMA_CH_STATE(val); - val = readl(lldev->trca + HIDMA_TRCA_CTRLSTS_REG); - lldev->trch_state = HIDMA_CH_STATE(val); - - /* already suspended by this OS */ - if ((lldev->trch_state == HIDMA_CH_SUSPENDED) || - (lldev->evch_state == HIDMA_CH_SUSPENDED)) - return 0; - - /* already stopped by the manager */ - if ((lldev->trch_state == HIDMA_CH_STOPPED) || - (lldev->evch_state == HIDMA_CH_STOPPED)) + /* The channel needs to be in working state */ + if (!hidma_ll_isenabled(lldev)) return 0; val = readl(lldev->trca + HIDMA_TRCA_CTRLSTS_REG); @@ -654,7 +639,7 @@ int hidma_ll_setup(struct hidma_lldev *lldev) u32 val; u32 nr_tres = lldev->nr_tres; - lldev->pending_tre_count = 0; + atomic_set(&lldev->pending_tre_count, 0); lldev->tre_processed_off = 0; lldev->evre_processed_off = 0; lldev->tre_write_offset = 0; @@ -691,17 +676,36 @@ int hidma_ll_setup(struct hidma_lldev *lldev) writel(HIDMA_EVRE_SIZE * nr_tres, lldev->evca + HIDMA_EVCA_RING_LEN_REG); - /* support IRQ only for now */ + /* configure interrupts */ + hidma_ll_setup_irq(lldev, lldev->msi_support); + + rc = hidma_ll_enable(lldev); + if (rc) + return rc; + + return rc; +} + +void hidma_ll_setup_irq(struct hidma_lldev *lldev, bool msi) +{ + u32 val; + + lldev->msi_support = msi; + + /* disable interrupts again after reset */ + writel(0, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG); + writel(0, lldev->evca + HIDMA_EVCA_IRQ_EN_REG); + + /* support IRQ by default */ val = readl(lldev->evca + HIDMA_EVCA_INTCTRL_REG); val &= ~0xF; - val |= 0x1; + if (!lldev->msi_support) + val = val | 0x1; writel(val, lldev->evca + HIDMA_EVCA_INTCTRL_REG); /* clear all pending interrupts and enable them */ writel(ENABLE_IRQS, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG); writel(ENABLE_IRQS, lldev->evca + HIDMA_EVCA_IRQ_EN_REG); - - return hidma_ll_enable(lldev); } struct hidma_lldev *hidma_ll_init(struct device *dev, u32 nr_tres, @@ -816,7 +820,7 @@ int hidma_ll_uninit(struct hidma_lldev *lldev) tasklet_kill(&lldev->task); memset(lldev->trepool, 0, required_bytes); lldev->trepool = NULL; - lldev->pending_tre_count = 0; + atomic_set(&lldev->pending_tre_count, 0); lldev->tre_write_offset = 0; rc = hidma_ll_reset(lldev); diff --git a/drivers/dma/qcom/hidma_mgmt.c b/drivers/dma/qcom/hidma_mgmt.c index 82f36e466083..f847d32cc4b5 100644 --- a/drivers/dma/qcom/hidma_mgmt.c +++ b/drivers/dma/qcom/hidma_mgmt.c @@ -282,6 +282,7 @@ static const struct acpi_device_id hidma_mgmt_acpi_ids[] = { {"QCOM8060"}, {}, }; +MODULE_DEVICE_TABLE(acpi, hidma_mgmt_acpi_ids); #endif static const struct of_device_id hidma_mgmt_match[] = { @@ -375,8 +376,15 @@ static int __init hidma_mgmt_of_populate_channels(struct device_node *np) ret = PTR_ERR(new_pdev); goto out; } + of_node_get(child); + new_pdev->dev.of_node = child; of_dma_configure(&new_pdev->dev, child); - + /* + * It is assumed that calling of_msi_configure is safe on + * platforms with or without MSI support. + */ + of_msi_configure(&new_pdev->dev, child); + of_node_put(child); kfree(res); res = NULL; } @@ -395,7 +403,6 @@ static int __init hidma_mgmt_init(void) for_each_matching_node(child, hidma_mgmt_match) { /* device tree based firmware here */ hidma_mgmt_of_populate_channels(child); - of_node_put(child); } #endif platform_driver_register(&hidma_mgmt_driver); diff --git a/drivers/dma/s3c24xx-dma.c b/drivers/dma/s3c24xx-dma.c index 3c579abbabb7..f04c4702d98b 100644 --- a/drivers/dma/s3c24xx-dma.c +++ b/drivers/dma/s3c24xx-dma.c @@ -289,16 +289,11 @@ static struct s3c24xx_dma_phy *s3c24xx_dma_get_phy(struct s3c24xx_dma_chan *s3cchan) { struct s3c24xx_dma_engine *s3cdma = s3cchan->host; - const struct s3c24xx_dma_platdata *pdata = s3cdma->pdata; - struct s3c24xx_dma_channel *cdata; struct s3c24xx_dma_phy *phy = NULL; unsigned long flags; int i; int ret; - if (s3cchan->slave) - cdata = &pdata->channels[s3cchan->id]; - for (i = 0; i < s3cdma->pdata->num_phy_channels; i++) { phy = &s3cdma->phy_chans[i]; diff --git a/drivers/dma/sh/usb-dmac.c b/drivers/dma/sh/usb-dmac.c index 06ecdc38cee0..72c649713ace 100644 --- a/drivers/dma/sh/usb-dmac.c +++ b/drivers/dma/sh/usb-dmac.c @@ -652,7 +652,6 @@ static bool usb_dmac_chan_filter(struct dma_chan *chan, void *arg) static struct dma_chan *usb_dmac_of_xlate(struct of_phandle_args *dma_spec, struct of_dma *ofdma) { - struct usb_dmac_chan *uchan; struct dma_chan *chan; dma_cap_mask_t mask; @@ -667,8 +666,6 @@ static struct dma_chan *usb_dmac_of_xlate(struct of_phandle_args *dma_spec, if (!chan) return NULL; - uchan = to_usb_dmac_chan(chan); - return chan; } diff --git a/drivers/dma/sirf-dma.c b/drivers/dma/sirf-dma.c index 8f62edad51be..a0733ac3edb1 100644 --- a/drivers/dma/sirf-dma.c +++ b/drivers/dma/sirf-dma.c @@ -1011,7 +1011,6 @@ static int __maybe_unused sirfsoc_dma_pm_suspend(struct device *dev) { struct sirfsoc_dma *sdma = dev_get_drvdata(dev); struct sirfsoc_dma_regs *save = &sdma->regs_save; - struct sirfsoc_dma_desc *sdesc; struct sirfsoc_dma_chan *schan; int ch; int ret; @@ -1044,9 +1043,6 @@ static int __maybe_unused sirfsoc_dma_pm_suspend(struct device *dev) schan = &sdma->channels[ch]; if (list_empty(&schan->active)) continue; - sdesc = list_first_entry(&schan->active, - struct sirfsoc_dma_desc, - node); save->ctrl[ch] = readl_relaxed(sdma->base + ch * 0x10 + SIRFSOC_DMA_CH_CTRL); } diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c index 307547f4848d..3688d0873a3e 100644 --- a/drivers/dma/stm32-dma.c +++ b/drivers/dma/stm32-dma.c @@ -527,13 +527,12 @@ static irqreturn_t stm32_dma_chan_irq(int irq, void *devid) { struct stm32_dma_chan *chan = devid; struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan); - u32 status, scr, sfcr; + u32 status, scr; spin_lock(&chan->vchan.lock); status = stm32_dma_irq_status(chan); scr = stm32_dma_read(dmadev, STM32_DMA_SCR(chan->id)); - sfcr = stm32_dma_read(dmadev, STM32_DMA_SFCR(chan->id)); if ((status & STM32_DMA_TCI) && (scr & STM32_DMA_SCR_TCIE)) { stm32_dma_irq_clear(chan, STM32_DMA_TCI); @@ -574,15 +573,12 @@ static int stm32_dma_set_xfer_param(struct stm32_dma_chan *chan, int src_bus_width, dst_bus_width; int src_burst_size, dst_burst_size; u32 src_maxburst, dst_maxburst; - dma_addr_t src_addr, dst_addr; u32 dma_scr = 0; src_addr_width = chan->dma_sconfig.src_addr_width; dst_addr_width = chan->dma_sconfig.dst_addr_width; src_maxburst = chan->dma_sconfig.src_maxburst; dst_maxburst = chan->dma_sconfig.dst_maxburst; - src_addr = chan->dma_sconfig.src_addr; - dst_addr = chan->dma_sconfig.dst_addr; switch (direction) { case DMA_MEM_TO_DEV: diff --git a/drivers/dma/zx296702_dma.c b/drivers/dma/zx296702_dma.c index 245d759d5ffc..380276d078b2 100644 --- a/drivers/dma/zx296702_dma.c +++ b/drivers/dma/zx296702_dma.c @@ -435,13 +435,12 @@ static struct zx_dma_desc_sw *zx_alloc_desc_resource(int num, if (!ds) return NULL; - ds->desc_hw = dma_pool_alloc(d->pool, GFP_NOWAIT, &ds->desc_hw_lli); + ds->desc_hw = dma_pool_zalloc(d->pool, GFP_NOWAIT, &ds->desc_hw_lli); if (!ds->desc_hw) { dev_dbg(chan->device->dev, "vch %p: dma alloc fail\n", &c->vc); kfree(ds); return NULL; } - memset(ds->desc_hw, 0, sizeof(struct zx_desc_hw) * num); ds->desc_num = num; return ds; } diff --git a/drivers/of/irq.c b/drivers/of/irq.c index 393fea85eb4e..3fda9a32defb 100644 --- a/drivers/of/irq.c +++ b/drivers/of/irq.c @@ -697,3 +697,4 @@ void of_msi_configure(struct device *dev, struct device_node *np) dev_set_msi_domain(dev, of_msi_get_domain(dev, np, DOMAIN_BUS_PLATFORM_MSI)); } +EXPORT_SYMBOL_GPL(of_msi_configure); diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 3c09e94cf827..28dfdce4beae 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -341,27 +341,20 @@ static void s3c64xx_spi_set_cs(struct spi_device *spi, bool enable) static int s3c64xx_spi_prepare_transfer(struct spi_master *spi) { struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(spi); - dma_filter_fn filter = sdd->cntrlr_info->filter; struct device *dev = &sdd->pdev->dev; - dma_cap_mask_t mask; if (is_polling(sdd)) return 0; - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - /* Acquire DMA channels */ - sdd->rx_dma.ch = dma_request_slave_channel_compat(mask, filter, - sdd->cntrlr_info->dma_rx, dev, "rx"); + sdd->rx_dma.ch = dma_request_slave_channel(dev, "rx"); if (!sdd->rx_dma.ch) { dev_err(dev, "Failed to get RX DMA channel\n"); return -EBUSY; } spi->dma_rx = sdd->rx_dma.ch; - sdd->tx_dma.ch = dma_request_slave_channel_compat(mask, filter, - sdd->cntrlr_info->dma_tx, dev, "tx"); + sdd->tx_dma.ch = dma_request_slave_channel(dev, "tx"); if (!sdd->tx_dma.ch) { dev_err(dev, "Failed to get TX DMA channel\n"); dma_release_channel(sdd->rx_dma.ch); @@ -1091,11 +1084,6 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) sdd->cur_bpw = 8; - if (!sdd->pdev->dev.of_node && (!sci->dma_tx || !sci->dma_rx)) { - dev_warn(&pdev->dev, "Unable to get SPI tx/rx DMA data. Switching to poll mode\n"); - sdd->port_conf->quirks = S3C64XX_SPI_QUIRK_POLL; - } - sdd->tx_dma.direction = DMA_MEM_TO_DEV; sdd->rx_dma.direction = DMA_DEV_TO_MEM; @@ -1205,9 +1193,8 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d with %d Slaves attached\n", sdd->port_id, master->num_chipselect); - dev_dbg(&pdev->dev, "\tIOmem=[%pR]\tFIFO %dbytes\tDMA=[Rx-%p, Tx-%p]\n", - mem_res, (FIFO_LVL_MASK(sdd) >> 1) + 1, - sci->dma_rx, sci->dma_tx); + dev_dbg(&pdev->dev, "\tIOmem=[%pR]\tFIFO %dbytes\n", + mem_res, (FIFO_LVL_MASK(sdd) >> 1) + 1); pm_runtime_mark_last_busy(&pdev->dev); pm_runtime_put_autosuspend(&pdev->dev); diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c index f607946fd996..58cbb30a9401 100644 --- a/drivers/tty/serial/8250/8250_lpss.c +++ b/drivers/tty/serial/8250/8250_lpss.c @@ -157,12 +157,12 @@ static int byt_serial_setup(struct lpss8250 *lpss, struct uart_port *port) static const struct dw_dma_platform_data qrk_serial_dma_pdata = { .nr_channels = 2, .is_private = true, - .is_nollp = true, .chan_allocation_order = CHAN_ALLOCATION_ASCENDING, .chan_priority = CHAN_PRIORITY_ASCENDING, .block_size = 4095, .nr_masters = 1, .data_width = {4}, + .multi_block = {0}, }; static void qrk_serial_setup_dma(struct lpss8250 *lpss, struct uart_port *port) diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 27e9ec8778eb..5308eae9ce35 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -84,6 +84,8 @@ struct pl08x_channel_data { * running any DMA transfer and multiplexing can be recycled * @lli_buses: buses which LLIs can be fetched from: PL08X_AHB1 | PL08X_AHB2 * @mem_buses: buses which memory can be accessed from: PL08X_AHB1 | PL08X_AHB2 + * @slave_map: DMA slave matching table + * @slave_map_len: number of elements in @slave_map */ struct pl08x_platform_data { struct pl08x_channel_data *slave_channels; @@ -93,6 +95,8 @@ struct pl08x_platform_data { void (*put_xfer_signal)(const struct pl08x_channel_data *, int); u8 lli_buses; u8 mem_buses; + const struct dma_slave_map *slave_map; + int slave_map_len; }; #ifdef CONFIG_AMBA_PL08X diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index cc535a478bae..feee6ec6a13b 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -336,6 +336,12 @@ enum dma_slave_buswidth { * may or may not be applicable on memory sources. * @dst_maxburst: same as src_maxburst but for destination target * mutatis mutandis. + * @src_port_window_size: The length of the register area in words the data need + * to be accessed on the device side. It is only used for devices which is using + * an area instead of a single register to receive the data. Typically the DMA + * loops in this area in order to transfer the data. + * @dst_port_window_size: same as src_port_window_size but for the destination + * port. * @device_fc: Flow Controller Settings. Only valid for slave channels. Fill * with 'true' if peripheral should be flow controller. Direction will be * selected at Runtime. @@ -363,6 +369,8 @@ struct dma_slave_config { enum dma_slave_buswidth dst_addr_width; u32 src_maxburst; u32 dst_maxburst; + u32 src_port_window_size; + u32 dst_port_window_size; bool device_fc; unsigned int slave_id; }; diff --git a/include/linux/platform_data/dma-dw.h b/include/linux/platform_data/dma-dw.h index 5f0e11e7354c..e69e415d0d98 100644 --- a/include/linux/platform_data/dma-dw.h +++ b/include/linux/platform_data/dma-dw.h @@ -14,6 +14,7 @@ #include <linux/device.h> #define DW_DMA_MAX_NR_MASTERS 4 +#define DW_DMA_MAX_NR_CHANNELS 8 /** * struct dw_dma_slave - Controller-specific information about a slave @@ -40,19 +41,18 @@ struct dw_dma_slave { * @is_private: The device channels should be marked as private and not for * by the general purpose DMA channel allocator. * @is_memcpy: The device channels do support memory-to-memory transfers. - * @is_nollp: The device channels does not support multi block transfers. * @chan_allocation_order: Allocate channels starting from 0 or 7 * @chan_priority: Set channel priority increasing from 0 to 7 or 7 to 0. * @block_size: Maximum block size supported by the controller * @nr_masters: Number of AHB masters supported by the controller * @data_width: Maximum data width supported by hardware per AHB master * (in bytes, power of 2) + * @multi_block: Multi block transfers supported by hardware per channel. */ struct dw_dma_platform_data { unsigned int nr_channels; bool is_private; bool is_memcpy; - bool is_nollp; #define CHAN_ALLOCATION_ASCENDING 0 /* zero to seven */ #define CHAN_ALLOCATION_DESCENDING 1 /* seven to zero */ unsigned char chan_allocation_order; @@ -62,6 +62,7 @@ struct dw_dma_platform_data { unsigned int block_size; unsigned char nr_masters; unsigned char data_width[DW_DMA_MAX_NR_MASTERS]; + unsigned char multi_block[DW_DMA_MAX_NR_CHANNELS]; }; #endif /* _PLATFORM_DATA_DMA_DW_H */ diff --git a/include/linux/platform_data/spi-s3c64xx.h b/include/linux/platform_data/spi-s3c64xx.h index 5c1e21c87270..da79774078a7 100644 --- a/include/linux/platform_data/spi-s3c64xx.h +++ b/include/linux/platform_data/spi-s3c64xx.h @@ -40,9 +40,6 @@ struct s3c64xx_spi_info { int num_cs; bool no_cs; int (*cfg_gpio)(void); - dma_filter_fn filter; - void *dma_tx; - void *dma_rx; }; /** |