diff options
author | Todd Fujinaka <todd.fujinaka@intel.com> | 2015-07-29 07:32:06 -0700 |
---|---|---|
committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2015-08-18 14:06:04 -0700 |
commit | 51045ecff09e33dcf4027f4aa6e6a05a840899d3 (patch) | |
tree | 72a681c2f8917ed7e8b61808a5000682b6d2a8d8 | |
parent | 30c72916d71b7970b16dca2bb1234aef2d37b695 (diff) |
igb: add support for 1512 PHY
This patch adds support for Marvell PHY 1512 (required for I354).
Submitted by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_82575.c | 20 | ||||
-rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_defines.h | 5 | ||||
-rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_phy.c | 93 | ||||
-rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_phy.h | 1 |
4 files changed, 114 insertions, 5 deletions
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index d19256994e5c..7a73510e547c 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -231,6 +231,7 @@ static s32 igb_init_phy_params_82575(struct e1000_hw *hw) /* Verify phy id and set remaining function pointers */ switch (phy->id) { case M88E1543_E_PHY_ID: + case M88E1512_E_PHY_ID: case I347AT4_E_PHY_ID: case M88E1112_E_PHY_ID: case M88E1111_I_PHY_ID: @@ -243,7 +244,7 @@ static s32 igb_init_phy_params_82575(struct e1000_hw *hw) else phy->ops.get_cable_length = igb_get_cable_length_m88; phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88; - /* Check if this PHY is confgured for media swap. */ + /* Check if this PHY is configured for media swap. */ if (phy->id == M88E1112_E_PHY_ID) { u16 data; @@ -266,6 +267,11 @@ static s32 igb_init_phy_params_82575(struct e1000_hw *hw) hw->mac.ops.check_for_link = igb_check_for_link_media_swap; } + if (phy->id == M88E1512_E_PHY_ID) { + ret_val = igb_initialize_M88E1512_phy(hw); + if (ret_val) + goto out; + } break; case IGP03E1000_E_PHY_ID: phy->type = e1000_phy_igp_3; @@ -897,6 +903,7 @@ out: **/ static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *hw) { + struct e1000_phy_info *phy = &hw->phy; s32 ret_val; /* This isn't a true "hard" reset, but is the only reset @@ -913,7 +920,11 @@ static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *hw) goto out; ret_val = igb_phy_sw_reset(hw); + if (ret_val) + goto out; + if (phy->id == M88E1512_E_PHY_ID) + ret_val = igb_initialize_M88E1512_phy(hw); out: return ret_val; } @@ -1587,6 +1598,7 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw) case I347AT4_E_PHY_ID: case M88E1112_E_PHY_ID: case M88E1543_E_PHY_ID: + case M88E1512_E_PHY_ID: case I210_I_PHY_ID: ret_val = igb_copper_link_setup_m88_gen2(hw); break; @@ -2629,7 +2641,8 @@ s32 igb_set_eee_i354(struct e1000_hw *hw, bool adv1G, bool adv100M) u16 phy_data; if ((hw->phy.media_type != e1000_media_type_copper) || - (phy->id != M88E1543_E_PHY_ID)) + ((phy->id != M88E1543_E_PHY_ID) && + (phy->id != M88E1512_E_PHY_ID))) goto out; if (!hw->dev_spec._82575.eee_disable) { @@ -2709,7 +2722,8 @@ s32 igb_get_eee_status_i354(struct e1000_hw *hw, bool *status) /* Check if EEE is supported on this device. */ if ((hw->phy.media_type != e1000_media_type_copper) || - (phy->id != M88E1543_E_PHY_ID)) + ((phy->id != M88E1543_E_PHY_ID) && + (phy->id != M88E1512_E_PHY_ID))) goto out; ret_val = igb_read_xmdio_reg(hw, E1000_PCS_STATUS_ADDR_I354, diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h index f8684aa285be..b1915043bc0c 100644 --- a/drivers/net/ethernet/intel/igb/e1000_defines.h +++ b/drivers/net/ethernet/intel/igb/e1000_defines.h @@ -604,6 +604,10 @@ #define E1000_M88E1112_MAC_CTRL_1_MODE_SHIFT 7 #define E1000_M88E1112_PAGE_ADDR 0x16 #define E1000_M88E1112_STATUS 0x01 +#define E1000_M88E1512_CFG_REG_1 0x0010 +#define E1000_M88E1512_CFG_REG_2 0x0011 +#define E1000_M88E1512_CFG_REG_3 0x0007 +#define E1000_M88E1512_MODE 0x0014 /* PCI Express Control */ #define E1000_GCR_CMPL_TMOUT_MASK 0x0000F000 @@ -861,6 +865,7 @@ #define M88_VENDOR 0x0141 #define I210_I_PHY_ID 0x01410C00 #define M88E1543_E_PHY_ID 0x01410EA0 +#define M88E1512_E_PHY_ID 0x01410DD0 /* M88E1000 Specific Registers */ #define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */ diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c index 987c9de24764..23ec28f43f6d 100644 --- a/drivers/net/ethernet/intel/igb/e1000_phy.c +++ b/drivers/net/ethernet/intel/igb/e1000_phy.c @@ -1262,6 +1262,8 @@ s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw) switch (hw->phy.id) { case I347AT4_E_PHY_ID: case M88E1112_E_PHY_ID: + case M88E1543_E_PHY_ID: + case M88E1512_E_PHY_ID: case I210_I_PHY_ID: reset_dsp = false; break; @@ -1270,9 +1272,9 @@ s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw) reset_dsp = false; break; } - if (!reset_dsp) + if (!reset_dsp) { hw_dbg("Link taking longer than expected.\n"); - else { + } else { /* We didn't get link. * Reset the DSP and cross our fingers. */ @@ -1297,6 +1299,8 @@ s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw) if (hw->phy.type != e1000_phy_m88 || hw->phy.id == I347AT4_E_PHY_ID || hw->phy.id == M88E1112_E_PHY_ID || + hw->phy.id == M88E1543_E_PHY_ID || + hw->phy.id == M88E1512_E_PHY_ID || hw->phy.id == I210_I_PHY_ID) goto out; @@ -1737,6 +1741,7 @@ s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw) phy->cable_length = phy_data / (is_cm ? 100 : 1); break; case M88E1543_E_PHY_ID: + case M88E1512_E_PHY_ID: case I347AT4_E_PHY_ID: /* Remember the original page select and set it to 7 */ ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT, @@ -2189,6 +2194,90 @@ s32 igb_phy_init_script_igp3(struct e1000_hw *hw) } /** + * igb_initialize_M88E1512_phy - Initialize M88E1512 PHY + * @hw: pointer to the HW structure + * + * Initialize Marvel 1512 to work correctly with Avoton. + **/ +s32 igb_initialize_M88E1512_phy(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = 0; + + /* Switch to PHY page 0xFF. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x00FF); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0x214B); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2144); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0x0C28); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2146); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0xB233); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x214D); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0xCC0C); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2159); + if (ret_val) + goto out; + + /* Switch to PHY page 0xFB. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x00FB); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_3, 0x000D); + if (ret_val) + goto out; + + /* Switch to PHY page 0x12. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x12); + if (ret_val) + goto out; + + /* Change mode to SGMII-to-Copper */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_MODE, 0x8001); + if (ret_val) + goto out; + + /* Return the PHY to page 0. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0); + if (ret_val) + goto out; + + ret_val = igb_phy_sw_reset(hw); + if (ret_val) { + hw_dbg("Error committing the PHY changes\n"); + return ret_val; + } + + /* msec_delay(1000); */ + usleep_range(1000, 2000); +out: + return ret_val; +} + +/** * igb_power_up_phy_copper - Restore copper link in case of PHY power down * @hw: pointer to the HW structure * diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.h b/drivers/net/ethernet/intel/igb/e1000_phy.h index 7af4ffab0285..24d55edbb0e3 100644 --- a/drivers/net/ethernet/intel/igb/e1000_phy.h +++ b/drivers/net/ethernet/intel/igb/e1000_phy.h @@ -61,6 +61,7 @@ s32 igb_phy_has_link(struct e1000_hw *hw, u32 iterations, void igb_power_up_phy_copper(struct e1000_hw *hw); void igb_power_down_phy_copper(struct e1000_hw *hw); s32 igb_phy_init_script_igp3(struct e1000_hw *hw); +s32 igb_initialize_M88E1512_phy(struct e1000_hw *hw); s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data); s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data); s32 igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data); |