diff options
| author | Linus Torvalds <torvalds@woody.linux-foundation.org> | 2007-05-11 09:59:50 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@woody.linux-foundation.org> | 2007-05-11 09:59:50 -0700 |
| commit | f2c60ed038dedcc43a0eb3ef4e0602741ba90384 (patch) | |
| tree | 1d06b6c080e1c164d87b66f8cc4b13203378b85a | |
| parent | cabca0cb0d0e8579428d8f8c3f606e2f01d26d14 (diff) | |
| parent | 3f2d560e9029ec0b7edf8be0c32425f4bb57d582 (diff) | |
Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (28 commits)
[MIPS] Rework cobalt_board_id
[MIPS] Use RTC_CMOS for Cobalt
[MIPS] Use platform_device for Cobalt UART
[MIPS] Separate Alchemy processor based boards config
[MIPS] Fix build error in atomic64_cmpxchg
[MIPS] Run checksyscalls for N32 and O32 ABI
[MIPS] tlbex: use __maybe_unused
[MIPS] excite: use __maybe_unused
[MIPS] Add extern cobalt_board_id
[MIPS] Remove unused CONFIG_TOSHIBA_BOARDS
[MIPS] Rename tb0229_defconfig to tb0219_defconfig
[MIPS] Update tb0229_defconfig; add CONFIG_GPIO_TB0219.
[MIPS] Add minimum defconfig for RBHMA4200
[MIPS] SB1: Build fix.
[MIPS] Drop __devinit tag from allocate_irqno() and free_irqno()
[MIPS] clocksource: use CLOCKSOURCE_MASK() macro
[MIPS] Remove LIMITED_DMA support
[MIPS] Remove Momenco Jaguar ATX support
[MIPS] Remove Momenco Ocelot G support
[MIPS] FPU hazard handling
...
71 files changed, 686 insertions, 4082 deletions
diff --git a/Documentation/mips/pci/pci.README b/Documentation/mips/pci/pci.README deleted file mode 100644 index 8697ee41372d..000000000000 --- a/Documentation/mips/pci/pci.README +++ /dev/null @@ -1,54 +0,0 @@ - -Pete Popov, ppopov@pacbell.net -07/11/2001 - -This README briefly explains how to use the pci and pci_auto -code in arch/mips/kernel. The code was ported from PowerPC and -modified slightly. It has been tested pretty well on PPC on some -rather complex systems with multiple bridges and devices behind -each bridge. However, at the time this README was written, the -mips port was tested only on boards with a single pci bus and -no P2P bridges. It's very possible that on boards with P2P -bridges some modifications have to be made. The code will -evolve, no doubt, but currently every single mips board -is doing its own pcibios thing and it has become a big -mess. This generic pci code is meant to clean up the mips -pci mess and make it easier to add pci support to new boards. - -inside the define for your board in arch/mips/config.in. -For example, the Galileo EV96100 board looks like this: - -if [ "$CONFIG_MIPS_EV96100" = "y" ]; then - define_bool CONFIG_PCI y - define_bool CONFIG_MIPS_GT96100 y - define_bool CONFIG_NEW_PCI y - define_bool CONFIG_SWAP_IO_SPACE y -fi - - -Next, if you want to use the arch/mips/kernel/pci code, which has the -pcibios_init() function, add - -define_bool CONFIG_NEW_PCI y - -inside the define for your board. Again, the EV96100 example above -show NEW_PCI turned on. - - -Now you need to add your files to hook in your pci configuration -cycles. Usually you'll need only a couple of files named something -like pci_fixups.c and pci_ops.c. You can copy the templates -provided and fill in the code. - -The file pci_ops.c should contain the pci configuration cycles routines. -It also has the mips_pci_channels[] array which contains the descriptors -of each pci controller. - -The file pci_fixups.c contains a few routines to do interrupt fixups, -resources fixups, and, if needed, pci bios fixups. - -Usually you'll put your pci_fixups.c file in your board specific directory, -since the functions in that file are board specific. The functions in -pci_ops.c, on the other hand, are usually pci controller specific so that -file could be shared among a few different boards using the same -pci controller. diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 16ecea3c0813..0f09412e1b7f 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -15,121 +15,8 @@ choice prompt "System type" default SGI_IP22 -config MIPS_MTX1 - bool "4G Systems MTX-1 board" - select DMA_NONCOHERENT - select HW_HAS_PCI - select RESOURCES_64BIT if PCI - select SOC_AU1500 - select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_BOSPORUS - bool "AMD Alchemy Bosporus board" - select SOC_AU1500 - select DMA_NONCOHERENT - select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_PB1000 - bool "AMD Alchemy PB1000 board" - select SOC_AU1000 - select DMA_NONCOHERENT - select HW_HAS_PCI - select RESOURCES_64BIT if PCI - select SWAP_IO_SPACE - select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_PB1100 - bool "AMD Alchemy PB1100 board" - select SOC_AU1100 - select DMA_NONCOHERENT - select HW_HAS_PCI - select RESOURCES_64BIT if PCI - select SWAP_IO_SPACE - select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_PB1500 - bool "AMD Alchemy PB1500 board" - select SOC_AU1500 - select DMA_NONCOHERENT - select HW_HAS_PCI - select RESOURCES_64BIT if PCI - select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_PB1550 - bool "AMD Alchemy PB1550 board" - select SOC_AU1550 - select DMA_NONCOHERENT - select HW_HAS_PCI - select MIPS_DISABLE_OBSOLETE_IDE - select RESOURCES_64BIT if PCI - select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_PB1200 - bool "AMD Alchemy PB1200 board" - select SOC_AU1200 - select DMA_NONCOHERENT - select MIPS_DISABLE_OBSOLETE_IDE - select RESOURCES_64BIT if PCI - select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_DB1000 - bool "AMD Alchemy DB1000 board" - select SOC_AU1000 - select DMA_NONCOHERENT - select HW_HAS_PCI - select RESOURCES_64BIT if PCI - select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_DB1100 - bool "AMD Alchemy DB1100 board" - select SOC_AU1100 - select DMA_NONCOHERENT - select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_DB1500 - bool "AMD Alchemy DB1500 board" - select SOC_AU1500 - select DMA_NONCOHERENT - select HW_HAS_PCI - select MIPS_DISABLE_OBSOLETE_IDE - select RESOURCES_64BIT if PCI - select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_DB1550 - bool "AMD Alchemy DB1550 board" - select SOC_AU1550 - select HW_HAS_PCI - select DMA_NONCOHERENT - select MIPS_DISABLE_OBSOLETE_IDE - select RESOURCES_64BIT if PCI - select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_DB1200 - bool "AMD Alchemy DB1200 board" - select SOC_AU1200 - select DMA_COHERENT - select MIPS_DISABLE_OBSOLETE_IDE - select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_MIRAGE - bool "AMD Alchemy Mirage board" - select DMA_NONCOHERENT - select SOC_AU1500 - select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_LITTLE_ENDIAN +config MACH_ALCHEMY + bool "Alchemy processor based machines" config BASLER_EXCITE bool "Basler eXcite smart camera" @@ -369,28 +256,6 @@ config MIPS_SIM This option enables support for MIPS Technologies MIPSsim software emulator. -config MOMENCO_JAGUAR_ATX - bool "Momentum Jaguar board" - select BOOT_ELF32 - select DMA_NONCOHERENT - select HW_HAS_PCI - select IRQ_CPU - select IRQ_CPU_RM7K - select IRQ_MV64340 - select LIMITED_DMA - select PCI_MARVELL - select RM7000_CPU_SCACHE - select SWAP_IO_SPACE - select SYS_HAS_CPU_RM9000 - select SYS_HAS_EARLY_PRINTK - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_KGDB - help - The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by - Momentum Computer <http://www.momenco.com/>. - config MOMENCO_OCELOT bool "Momentum Ocelot board" select DMA_NONCOHERENT @@ -446,29 +311,6 @@ config MOMENCO_OCELOT_C The Ocelot is a MIPS-based Single Board Computer (SBC) made by Momentum Computer <http://www.momenco.com/>. -config MOMENCO_OCELOT_G - bool "Momentum Ocelot-G board" - select DMA_NONCOHERENT - select HW_HAS_PCI - select IRQ_CPU - select IRQ_CPU_RM7K - select PCI_MARVELL - select RM7000_CPU_SCACHE - select SWAP_IO_SPACE - select SYS_HAS_CPU_RM7000 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL if BROKEN - select SYS_SUPPORTS_BIG_ENDIAN - help - The Ocelot is a MIPS-based Single Board Computer (SBC) made by - Momentum Computer <http://www.momenco.com/>. - -config MIPS_XXS1500 - bool "MyCable XXS1500 board" - select DMA_NONCOHERENT - select SOC_AU1500 - select SYS_SUPPORTS_LITTLE_ENDIAN - config PNX8550_JBS bool "Philips PNX8550 based JBS board" select PNX8550 @@ -775,7 +617,6 @@ config TOSHIBA_JMR3927 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_BIG_ENDIAN - select TOSHIBA_BOARDS select GENERIC_HARDIRQS_NO__DO_IRQ config TOSHIBA_RBTX4927 @@ -791,7 +632,6 @@ config TOSHIBA_RBTX4927 select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_KGDB - select TOSHIBA_BOARDS select GENERIC_HARDIRQS_NO__DO_IRQ help This Toshiba board is based on the TX4927 processor. Say Y here to @@ -811,7 +651,6 @@ config TOSHIBA_RBTX4938 select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_KGDB - select TOSHIBA_BOARDS select GENERIC_HARDIRQS_NO__DO_IRQ help This Toshiba board is based on the TX4938 processor. Say Y here to @@ -819,11 +658,11 @@ config TOSHIBA_RBTX4938 endchoice +source "arch/mips/au1000/Kconfig" source "arch/mips/ddb5xxx/Kconfig" source "arch/mips/gt64120/ev64120/Kconfig" source "arch/mips/jazz/Kconfig" source "arch/mips/lasat/Kconfig" -source "arch/mips/momentum/Kconfig" source "arch/mips/pmc-sierra/Kconfig" source "arch/mips/sgi-ip27/Kconfig" source "arch/mips/sibyte/Kconfig" @@ -923,11 +762,6 @@ config GENERIC_ISA_DMA config I8259 bool -config LIMITED_DMA - bool - select HIGHMEM - select SYS_SUPPORTS_HIGHMEM - config MIPS_BONITO64 bool @@ -1013,33 +847,6 @@ config MIPS_RM9122 config PCI_MARVELL bool -config SOC_AU1000 - bool - select SOC_AU1X00 - -config SOC_AU1100 - bool - select SOC_AU1X00 - -config SOC_AU1500 - bool - select SOC_AU1X00 - -config SOC_AU1550 - bool - select SOC_AU1X00 - -config SOC_AU1200 - bool - select SOC_AU1X00 - -config SOC_AU1X00 - bool - select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_APM_EMULATION - select SYS_SUPPORTS_KGDB - config SERIAL_RM9000 bool @@ -1081,9 +888,9 @@ config WDT_RM9000 choice prompt "Galileo Chip Clock" #default SYSCLK_83 if MIPS_EV64120 - depends on MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G + depends on MIPS_EV64120 || MOMENCO_OCELOT default SYSCLK_83 if MIPS_EV64120 - default SYSCLK_100 if MOMENCO_OCELOT || MOMENCO_OCELOT_G + default SYSCLK_100 if MOMENCO_OCELOT config SYSCLK_75 bool "75" if MIPS_EV64120 @@ -1092,7 +899,7 @@ config SYSCLK_83 bool "83.3" if MIPS_EV64120 config SYSCLK_100 - bool "100" if MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G + bool "100" if MIPS_EV64120 || MOMENCO_OCELOT endchoice @@ -1131,9 +938,6 @@ config ARC64 config BOOT_ELF64 bool -config TOSHIBA_BOARDS - bool - menu "CPU selection" choice @@ -1557,6 +1361,7 @@ config MIPS_MT_SMP bool "Use 1 TC on each available VPE for SMP" depends on SYS_SUPPORTS_MULTITHREADING select CPU_MIPSR2_IRQ_VI + select CPU_MIPSR2_IRQ_EI select CPU_MIPSR2_SRS select MIPS_MT select NR_CPUS_DEFAULT_2 @@ -1572,6 +1377,7 @@ config MIPS_MT_SMTC #depends on CPU_MIPS64_R2 # once there is hardware ... depends on SYS_SUPPORTS_MULTITHREADING select CPU_MIPSR2_IRQ_VI + select CPU_MIPSR2_IRQ_EI select CPU_MIPSR2_SRS select MIPS_MT select NR_CPUS_DEFAULT_8 @@ -1584,6 +1390,8 @@ config MIPS_MT_SMTC config MIPS_VPE_LOADER bool "VPE loader support." depends on SYS_SUPPORTS_MULTITHREADING + select CPU_MIPSR2_IRQ_VI + select CPU_MIPSR2_IRQ_EI select MIPS_MT help Includes a loader for loading an elf relocatable object diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 4892db88a86a..f450066b6241 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -343,15 +343,6 @@ cflags-$(CONFIG_MOMENCO_OCELOT) += -Iinclude/asm-mips/mach-ocelot load-$(CONFIG_MOMENCO_OCELOT) += 0xffffffff80100000 # -# Momentum Ocelot-G board -# -# The Ocelot-G setup.o must be linked early - it does the ioremap() for the -# mips_io_port_base. -# -core-$(CONFIG_MOMENCO_OCELOT_G) += arch/mips/momentum/ocelot_g/ -load-$(CONFIG_MOMENCO_OCELOT_G) += 0xffffffff80100000 - -# # Momentum Ocelot-C and -CS boards # # The Ocelot-C[S] setup.o must be linked early - it does the ioremap() for the @@ -388,17 +379,6 @@ cflags-$(CONFIG_BASLER_EXCITE) += -Iinclude/asm-mips/mach-excite load-$(CONFIG_BASLER_EXCITE) += 0x80100000 # -# Momentum Jaguar ATX -# -core-$(CONFIG_MOMENCO_JAGUAR_ATX) += arch/mips/momentum/jaguar_atx/ -cflags-$(CONFIG_MOMENCO_JAGUAR_ATX) += -Iinclude/asm-mips/mach-ja -#ifdef CONFIG_JAGUAR_DMALOW -#load-$(CONFIG_MOMENCO_JAGUAR_ATX) += 0xffffffff88000000 -#else -load-$(CONFIG_MOMENCO_JAGUAR_ATX) += 0xffffffff80100000 -#endif - -# # NEC DDB # core-$(CONFIG_DDB5XXX_COMMON) += arch/mips/ddb5xxx/common/ @@ -729,3 +709,25 @@ archclean: CLEAN_FILES += vmlinux.32 \ vmlinux.64 \ vmlinux.ecoff + +quiet_cmd_syscalls_n32 = CALL-N32 $< + cmd_syscalls_n32 = $(CONFIG_SHELL) $< $(CC) $(c_flags) -mabi=n32 + +quiet_cmd_syscalls_o32 = CALL-O32 $< + cmd_syscalls_o32 = $(CONFIG_SHELL) $< $(CC) $(c_flags) -mabi=32 + +PHONY += missing-syscalls-n32 missing-syscalls-o32 + +missing-syscalls-n32: scripts/checksyscalls.sh FORCE + $(call cmd,syscalls_n32) + +missing-syscalls-o32: scripts/checksyscalls.sh FORCE + $(call cmd,syscalls_o32) + +archprepare: +ifdef CONFIG_MIPS32_N32 + $(Q)$(MAKE) $(build)=arch/mips missing-syscalls-n32 +endif +ifdef CONFIG_MIPS32_O32 + $(Q)$(MAKE) $(build)=arch/mips missing-syscalls-o32 +endif diff --git a/arch/mips/au1000/Kconfig b/arch/mips/au1000/Kconfig new file mode 100644 index 000000000000..abea88098253 --- /dev/null +++ b/arch/mips/au1000/Kconfig @@ -0,0 +1,142 @@ +choice + prompt "Machine type" + depends on MACH_ALCHEMY + default MIPS_DB1000 + +config MIPS_MTX1 + bool "4G Systems MTX-1 board" + select DMA_NONCOHERENT + select HW_HAS_PCI + select RESOURCES_64BIT if PCI + select SOC_AU1500 + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_BOSPORUS + bool "Alchemy Bosporus board" + select SOC_AU1500 + select DMA_NONCOHERENT + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_DB1000 + bool "Alchemy DB1000 board" + select SOC_AU1000 + select DMA_NONCOHERENT + select HW_HAS_PCI + select RESOURCES_64BIT if PCI + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_DB1100 + bool "Alchemy DB1100 board" + select SOC_AU1100 + select DMA_NONCOHERENT + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_DB1200 + bool "Alchemy DB1200 board" + select SOC_AU1200 + select DMA_COHERENT + select MIPS_DISABLE_OBSOLETE_IDE + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_DB1500 + bool "Alchemy DB1500 board" + select SOC_AU1500 + select DMA_NONCOHERENT + select HW_HAS_PCI + select MIPS_DISABLE_OBSOLETE_IDE + select RESOURCES_64BIT if PCI + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_DB1550 + bool "Alchemy DB1550 board" + select SOC_AU1550 + select HW_HAS_PCI + select DMA_NONCOHERENT + select MIPS_DISABLE_OBSOLETE_IDE + select RESOURCES_64BIT if PCI + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_MIRAGE + bool "Alchemy Mirage board" + select DMA_NONCOHERENT + select SOC_AU1500 + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_PB1000 + bool "Alchemy PB1000 board" + select SOC_AU1000 + select DMA_NONCOHERENT + select HW_HAS_PCI + select RESOURCES_64BIT if PCI + select SWAP_IO_SPACE + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_PB1100 + bool "Alchemy PB1100 board" + select SOC_AU1100 + select DMA_NONCOHERENT + select HW_HAS_PCI + select RESOURCES_64BIT if PCI + select SWAP_IO_SPACE + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_PB1200 + bool "Alchemy PB1200 board" + select SOC_AU1200 + select DMA_NONCOHERENT + select MIPS_DISABLE_OBSOLETE_IDE + select RESOURCES_64BIT if PCI + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_PB1500 + bool "Alchemy PB1500 board" + select SOC_AU1500 + select DMA_NONCOHERENT + select HW_HAS_PCI + select RESOURCES_64BIT if PCI + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_PB1550 + bool "Alchemy PB1550 board" + select SOC_AU1550 + select DMA_NONCOHERENT + select HW_HAS_PCI + select MIPS_DISABLE_OBSOLETE_IDE + select RESOURCES_64BIT if PCI + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_XXS1500 + bool "MyCable XXS1500 board" + select DMA_NONCOHERENT + select SOC_AU1500 + select SYS_SUPPORTS_LITTLE_ENDIAN + +endchoice + +config SOC_AU1000 + bool + select SOC_AU1X00 + +config SOC_AU1100 + bool + select SOC_AU1X00 + +config SOC_AU1500 + bool + select SOC_AU1X00 + +config SOC_AU1550 + bool + select SOC_AU1X00 + +config SOC_AU1200 + bool + select SOC_AU1X00 + +config SOC_AU1X00 + bool + select SYS_HAS_CPU_MIPS32_R1 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_APM_EMULATION + select SYS_SUPPORTS_KGDB diff --git a/arch/mips/basler/excite/excite_device.c b/arch/mips/basler/excite/excite_device.c index cc1ce77eab4a..e00bc2d7f301 100644 --- a/arch/mips/basler/excite/excite_device.c +++ b/arch/mips/basler/excite/excite_device.c @@ -68,7 +68,7 @@ enum { static struct resource - excite_ctr_resource __attribute__((unused)) = { + excite_ctr_resource __maybe_unused = { .name = "GPI counters", .start = 0, .end = 5, @@ -77,7 +77,7 @@ static struct resource .sibling = NULL, .child = NULL }, - excite_gpislice_resource __attribute__((unused)) = { + excite_gpislice_resource __maybe_unused = { .name = "GPI slices", .start = 0, .end = 1, @@ -86,7 +86,7 @@ static struct resource .sibling = NULL, .child = NULL }, - excite_mdio_channel_resource __attribute__((unused)) = { + excite_mdio_channel_resource __maybe_unused = { .name = "MDIO channels", .start = 0, .end = 1, @@ -95,7 +95,7 @@ static struct resource .sibling = NULL, .child = NULL }, - excite_fifomem_resource __attribute__((unused)) = { + excite_fifomem_resource __maybe_unused = { .name = "FIFO memory", .start = 0, .end = 767, @@ -104,7 +104,7 @@ static struct resource .sibling = NULL, .child = NULL }, - excite_scram_resource __attribute__((unused)) = { + excite_scram_resource __maybe_unused = { .name = "Scratch RAM", .start = EXCITE_PHYS_SCRAM, .end = EXCITE_PHYS_SCRAM + EXCITE_SIZE_SCRAM - 1, @@ -113,7 +113,7 @@ static struct resource .sibling = NULL, .child = NULL }, - excite_fpga_resource __attribute__((unused)) = { + excite_fpga_resource __maybe_unused = { .name = "System FPGA", .start = EXCITE_PHYS_FPGA, .end = EXCITE_PHYS_FPGA + EXCITE_SIZE_FPGA - 1, @@ -122,7 +122,7 @@ static struct resource .sibling = NULL, .child = NULL }, - excite_nand_resource __attribute__((unused)) = { + excite_nand_resource __maybe_unused = { .name = "NAND flash control", .start = EXCITE_PHYS_NAND, .end = EXCITE_PHYS_NAND + EXCITE_SIZE_NAND - 1, @@ -131,7 +131,7 @@ static struct resource .sibling = NULL, .child = NULL }, - excite_titan_resource __attribute__((unused)) = { + excite_titan_resource __maybe_unused = { .name = "TITAN registers", .start = EXCITE_PHYS_TITAN, .end = EXCITE_PHYS_TITAN + EXCITE_SIZE_TITAN - 1, diff --git a/arch/mips/cobalt/Makefile b/arch/mips/cobalt/Makefile index 9565b2104dcd..c292f80a8c74 100644 --- a/arch/mips/cobalt/Makefile +++ b/arch/mips/cobalt/Makefile @@ -2,7 +2,7 @@ # Makefile for the Cobalt micro systems family specific parts of the kernel # -obj-y := irq.o reset.o setup.o buttons.o +obj-y := buttons.o irq.o reset.o rtc.o serial.o setup.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_EARLY_PRINTK) += console.o diff --git a/arch/mips/cobalt/rtc.c b/arch/mips/cobalt/rtc.c new file mode 100644 index 000000000000..284daefc5c55 --- /dev/null +++ b/arch/mips/cobalt/rtc.c @@ -0,0 +1,63 @@ +/* + * Registration of Cobalt RTC platform device. + * + * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> + +static struct resource cobalt_rtc_resource[] __initdata = { + { + .start = 0x70, + .end = 0x77, + .flags = IORESOURCE_IO, + }, + { + .start = 8, + .end = 8, + .flags = IORESOURCE_IRQ, + }, +}; + +static __init int cobalt_rtc_add(void) +{ + struct platform_device *pdev; + int retval; + + pdev = platform_device_alloc("rtc_cmos", -1); + if (!pdev) + return -ENOMEM; + + retval = platform_device_add_resources(pdev, cobalt_rtc_resource, + ARRAY_SIZE(cobalt_rtc_resource)); + if (retval) + goto err_free_device; + + retval = platform_device_add(pdev); + if (retval) + goto err_free_device; + + return 0; + +err_free_device: + platform_device_put(pdev); + + return retval; +} +device_initcall(cobalt_rtc_add); diff --git a/arch/mips/cobalt/serial.c b/arch/mips/cobalt/serial.c new file mode 100644 index 000000000000..c27116599a5f --- /dev/null +++ b/arch/mips/cobalt/serial.c @@ -0,0 +1,85 @@ +/* + * Registration of Cobalt UART platform device. + * + * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> +#include <linux/serial_8250.h> + +#include <cobalt.h> + +static struct resource cobalt_uart_resource[] __initdata = { + { + .start = 0x1c800000, + .end = 0x1c800007, + .flags = IORESOURCE_MEM, + }, + { + .start = COBALT_SERIAL_IRQ, + .end = COBALT_SERIAL_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct plat_serial8250_port cobalt_serial8250_port[] = { + { + .irq = COBALT_SERIAL_IRQ, + .uartclk = 18432000, + .iotype = UPIO_MEM, + .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .mapbase = 0x1c800000, + }, + {}, +}; + +static __init int cobalt_uart_add(void) +{ + struct platform_device *pdev; + int retval; + + /* + * Cobalt Qube1 and RAQ1 have no UART. + */ + if (cobalt_board_id <= COBALT_BRD_ID_RAQ1) + return 0; + + pdev = platform_device_alloc("serial8250", -1); + if (!pdev) + return -ENOMEM; + + pdev->id = PLAT8250_DEV_PLATFORM; + pdev->dev.platform_data = cobalt_serial8250_port; + + retval = platform_device_add_resources(pdev, cobalt_uart_resource, ARRAY_SIZE(cobalt_uart_resource)); + if (retval) + goto err_free_device; + + retval = platform_device_add(pdev); + if (retval) + goto err_free_device; + + return 0; + +err_free_device: + platform_device_put(pdev); + + return retval; +} +device_initcall(cobalt_uart_add); diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c index d0dd81790f74..7abe45e78425 100644 --- a/arch/mips/cobalt/setup.c +++ b/arch/mips/cobalt/setup.c @@ -10,11 +10,8 @@ * */ #include <linux/interrupt.h> -#include <linux/pci.h> #include <linux/init.h> #include <linux/pm.h> -#include <linux/serial.h> -#include <linux/serial_core.h> #include <asm/bootinfo.h> #include <asm/time.h> @@ -27,9 +24,6 @@ extern void cobalt_machine_restart(char *command); extern void cobalt_machine_halt(void); extern void cobalt_machine_power_off(void); -extern void cobalt_early_console(void); - -int cobalt_board_id; const char *get_system_type(void) { @@ -95,8 +89,6 @@ static struct resource cobalt_reserved_resources[] = { void __init plat_mem_setup(void) { - static struct uart_port uart; - unsigned int devfn = PCI_DEVFN(COBALT_PCICONF_VIA, 0); int i; _machine_restart = cobalt_machine_restart; @@ -111,29 +103,6 @@ void __init plat_mem_setup(void) /* These resources have been reserved by VIA SuperI/O chip. */ for (i = 0; i < ARRAY_SIZE(cobalt_reserved_resources); i++) request_resource(&ioport_resource, cobalt_reserved_resources + i); - - /* Read the cobalt id register out of the PCI config space */ - PCI_CFG_SET(devfn, (VIA_COBALT_BRD_ID_REG & ~0x3)); - cobalt_board_id = GT_READ(GT_PCI0_CFGDATA_OFS); - cobalt_board_id >>= ((VIA_COBALT_BRD_ID_REG & 3) * 8); - cobalt_board_id = VIA_COBALT_BRD_REG_to_ID(cobalt_board_id); - - printk("Cobalt board ID: %d\n", cobalt_board_id); - - if (cobalt_board_id > COBALT_BRD_ID_RAQ1) { -#ifdef CONFIG_SERIAL_8250 - uart.line = 0; - uart.type = PORT_UNKNOWN; - uart.uartclk = 18432000; - uart.irq = COBALT_SERIAL_IRQ; - uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | - UPF_SKIP_TEST; - uart.iotype = UPIO_MEM; - uart.mapbase = 0x1c800000; - - early_serial_setup(&uart); -#endif - } } /* diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig index ba593b510b76..631b2138ad68 100644 --- a/arch/mips/configs/cobalt_defconfig +++ b/arch/mips/configs/cobalt_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:24 2007 +# Linux kernel version: 2.6.21-rc7 +# Wed Apr 18 14:25:45 2007 # CONFIG_MIPS=y @@ -62,7 +62,6 @@ CONFIG_MIPS_COBALT=y # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_EARLY_PRINTK=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set @@ -74,12 +73,14 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_EARLY_PRINTK=y +CONFIG_SYS_HAS_EARLY_PRINTK=y CONFIG_I8259=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_IRQ_CPU=y -CONFIG_MIPS_GT64111=y +CONFIG_PCI_GT64XXX_PCI0=y CONFIG_MIPS_L1_CACHE_SHIFT=5 # @@ -179,6 +180,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_IKCONFIG is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -477,7 +479,6 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -518,7 +519,7 @@ CONFIG_BLK_DEV_IDEPCI=y # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_PCI_AUTO is not set +# CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set @@ -546,7 +547,6 @@ CONFIG_BLK_DEV_TC86C001=y # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set -# CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set # @@ -779,7 +779,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -CONFIG_RTC=y +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set CONFIG_COBALT_LCD=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -815,6 +816,11 @@ CONFIG_COBALT_LCD=y # CONFIG_HWMON_VID is not set # +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -827,7 +833,7 @@ CONFIG_COBALT_LCD=y # # Graphics support # -# CONFIG_FIRMWARE_EDID is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # CONFIG_FB is not set # @@ -835,7 +841,6 @@ CONFIG_COBALT_LCD=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -894,7 +899,29 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # Real Time Clock # -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set + +# +# RTC drivers +# +CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_V3020 is not set # # DMA Engine support diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index 0db6a8b37301..10f6af43753d 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -9,6 +9,7 @@ CONFIG_MIPS=y # Machine selection # CONFIG_ZONE_DMA=y +CONFIG_MACH_ALCHEMY=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig index 162add97c5ef..4b0862927748 100644 --- a/arch/mips/configs/db1100_defconfig +++ b/arch/mips/configs/db1100_defconfig @@ -9,6 +9,7 @@ CONFIG_MIPS=y # Machine selection # CONFIG_ZONE_DMA=y +CONFIG_MACH_ALCHEMY=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig index 82801ec43e6a..820659e810dc 100644 --- a/arch/mips/configs/db1200_defconfig +++ b/arch/mips/configs/db1200_defconfig @@ -9,6 +9,7 @@ CONFIG_MIPS=y # Machine selection # CONFIG_ZONE_DMA=y +CONFIG_MACH_ALCHEMY=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig index 545f23094e13..4050b9b91bcb 100644 --- a/arch/mips/configs/db1500_defconfig +++ b/arch/mips/configs/db1500_defconfig @@ -9,6 +9,7 @@ CONFIG_MIPS=y # Machine selection # CONFIG_ZONE_DMA=y +CONFIG_MACH_ALCHEMY=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig index 5bd3b4328e57..7b3519058ab8 100644 --- a/arch/mips/configs/db1550_defconfig +++ b/arch/mips/configs/db1550_defconfig @@ -9,6 +9,7 @@ CONFIG_MIPS=y # Machine selection # CONFIG_ZONE_DMA=y +CONFIG_MACH_ALCHEMY=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set diff --git a/arch/mips/configs/jaguar-atx_defconfig b/arch/mips/configs/jaguar-atx_defconfig deleted file mode 100644 index 083104daa2ca..000000000000 --- a/arch/mips/configs/jaguar-atx_defconfig +++ /dev/null @@ -1,897 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:33 2007 -# -CONFIG_MIPS=y - -# -# Machine selection -# -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set -# CONFIG_MIPS_ATLAS is not set -# CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set -# CONFIG_MIPS_SIM is not set -CONFIG_MOMENCO_JAGUAR_ATX=y -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set -# CONFIG_MOMENCO_OCELOT_G is not set -# CONFIG_MIPS_XXS1500 is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_DDB5477 is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set -# CONFIG_MARKEINS is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_JAGUAR_DMALOW=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_TIME=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set -CONFIG_DMA_NONCOHERENT=y -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_LIMITED_DMA=y -CONFIG_CPU_BIG_ENDIAN=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_IRQ_CPU=y -CONFIG_IRQ_CPU_RM7K=y -CONFIG_IRQ_MV64340=y -CONFIG_PCI_MARVELL=y -CONFIG_SWAP_IO_SPACE=y -CONFIG_BOOT_ELF32=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 - -# -# CPU selection -# -# CONFIG_CPU_MIPS32_R1 is not set -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_RM7000 is not set -CONFIG_CPU_RM9000=y -# CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_RM9000=y -CONFIG_WEAK_ORDERING=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y - -# -# Kernel type -# -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -CONFIG_BOARD_SCACHE=y -CONFIG_RM7000_CPU_SCACHE=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set -# CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_HIGHMEM=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_SYS_SUPPORTS_HIGHMEM=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -# CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set -# CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y -# CONFIG_HZ_1024 is not set -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -# CONFIG_EXPERIMENTAL is not set -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_SYSFS_DEPRECATED=y -CONFIG_RELAY=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# Bus options (PCI, PCMCIA, EISA, ISA, TC) -# -CONFIG_HW_HAS_PCI=y -CONFIG_PCI=y -CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -# CONFIG_PACKET is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_IPV6=m -CONFIG_IPV6_PRIVACY=y -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -CONFIG_IPV6_SIT=m -CONFIG_IPV6_TUNNEL=m -CONFIG_NETWORK_SECMARK=y -# CONFIG_NETFILTER is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -CONFIG_CONNECTOR=m - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -CONFIG_ATA_OVER_ETH=m - -# -# Misc devices -# -CONFIG_SGI_IOC4=m - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_RAID_ATTRS=m -# CONFIG_SCSI is not set -# CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -CONFIG_PHYLIB=m - -# -# MII PHY device drivers -# -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m -# CONFIG_BROADCOM_PHY is not set -# CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_DM9000 is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -CONFIG_EEPRO100=y -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_MV643XX_ETH=y -CONFIG_QLA3XXX=m - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=m -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=m - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Auxiliary Display support -# - -# -# Virtualization -# - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -CONFIG_FUSE_FS=m -CONFIG_GENERIC_ACL=y - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_HFSPLUS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y - -# -# Security options -# -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_BITREVERSE=m -# CONFIG_CRC_CCITT is not set -CONFIG_CRC16=m -CONFIG_CRC32=m -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index 068e48ec7093..1b364cf69140 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -80,7 +80,6 @@ CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_MIPS_TX3927=y CONFIG_SWAP_IO_SPACE=y CONFIG_MIPS_L1_CACHE_SHIFT=5 -CONFIG_TOSHIBA_BOARDS=y # # CPU selection diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig index 69678d99ae61..37d696c64541 100644 --- a/arch/mips/configs/pb1100_defconfig +++ b/arch/mips/configs/pb1100_defconfig @@ -9,6 +9,7 @@ CONFIG_MIPS=y # Machine selection # CONFIG_ZONE_DMA=y +CONFIG_MACH_ALCHEMY=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig index 070672799dac..b11f0e8b6059 100644 --- a/arch/mips/configs/pb1500_defconfig +++ b/arch/mips/configs/pb1500_defconfig @@ -9,6 +9,7 @@ CONFIG_MIPS=y # Machine selection # CONFIG_ZONE_DMA=y +CONFIG_MACH_ALCHEMY=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig index 354e49b7a5f1..2927f38f4907 100644 --- a/arch/mips/configs/pb1550_defconfig +++ b/arch/mips/configs/pb1550_defconfig @@ -9,6 +9,7 @@ CONFIG_MIPS=y # Machine selection # CONFIG_ZONE_DMA=y +CONFIG_MACH_ALCHEMY=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set diff --git a/arch/mips/configs/ocelot_g_defconfig b/arch/mips/configs/rbhma4200_defconfig index 7078e6b3ea11..35d64260917e 100644 --- a/arch/mips/configs/ocelot_g_defconfig +++ b/arch/mips/configs/rbhma4200_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:36 2007 +# Linux kernel version: 2.6.21 +# Wed May 9 23:44:19 2007 # CONFIG_MIPS=y # # Machine selection # -CONFIG_ZONE_DMA=y # CONFIG_MIPS_MTX1 is not set # CONFIG_MIPS_BOSPORUS is not set # CONFIG_MIPS_PB1000 is not set @@ -33,11 +32,9 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set # CONFIG_MOMENCO_OCELOT is not set # CONFIG_MOMENCO_OCELOT_3 is not set # CONFIG_MOMENCO_OCELOT_C is not set -CONFIG_MOMENCO_OCELOT_G=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set @@ -60,8 +57,9 @@ CONFIG_MOMENCO_OCELOT_G=y # CONFIG_SIBYTE_CRHONE is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set +CONFIG_TOSHIBA_RBTX4927=y # CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_TOSHIBA_FPCIB0 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set @@ -70,19 +68,15 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_I8259=y CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_IRQ_CPU=y -CONFIG_IRQ_CPU_RM7K=y -CONFIG_PCI_MARVELL=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_SWAP_IO_SPACE=y -# CONFIG_SYSCLK_75 is not set -# CONFIG_SYSCLK_83 is not set -CONFIG_SYSCLK_100=y CONFIG_MIPS_L1_CACHE_SHIFT=5 # @@ -97,18 +91,19 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_VR41XX is not set # CONFIG_CPU_R4300 is not set # CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_TX49XX is not set +CONFIG_CPU_TX49XX=y # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set # CONFIG_CPU_R6000 is not set # CONFIG_CPU_NEVADA is not set # CONFIG_CPU_R8000 is not set # CONFIG_CPU_R10000 is not set -CONFIG_CPU_RM7000=y +# CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_RM7000=y +CONFIG_SYS_HAS_CPU_TX49XX=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y @@ -121,19 +116,15 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_BOARD_SCACHE=y -CONFIG_RM7000_CPU_SCACHE=y CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set -# CONFIG_64BIT_PHYS_ADDR is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -143,17 +134,17 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_RESOURCES_64BIT=y -CONFIG_ZONE_DMA_FLAG=1 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set +CONFIG_HZ_250=y # CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y +# CONFIG_HZ_1000 is not set # CONFIG_HZ_1024 is not set CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 +CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -183,34 +174,42 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y -CONFIG_RELAY=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y +# CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set # # Loadable module support # -# CONFIG_MODULES is not set +CONFIG_MODULES=y +# CONFIG_MODULE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y # # Block layer @@ -218,7 +217,7 @@ CONFIG_BASE_SMALL=0 CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -CONFIG_LSF=y +# CONFIG_LSF is not set # # IO Schedulers @@ -238,17 +237,12 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +# CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_MMU=y # # PCCARD (PCMCIA/CardBus) support # -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set # # Executable file formats @@ -260,10 +254,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set +# CONFIG_PM is not set # # Networking @@ -273,25 +264,21 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set -# CONFIG_PACKET is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=y -# CONFIG_XFRM_SUB_POLICY is not set -CONFIG_XFRM_MIGRATE=y -CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y +# CONFIG_NET_KEY is not set CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set +CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_DHCP is not set # CONFIG_IP_PNP_BOOTP is not set # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set @@ -299,19 +286,19 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set -CONFIG_NETWORK_SECMARK=y +# CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # @@ -352,13 +339,16 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -CONFIG_IEEE80211=y -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=y -CONFIG_IEEE80211_CRYPT_CCMP=y -CONFIG_IEEE80211_SOFTMAC=y -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set # # Device Drivers @@ -369,18 +359,12 @@ CONFIG_WIRELESS_EXT=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y # CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker # -CONFIG_CONNECTOR=y -CONFIG_PROC_EVENTS=y - -# -# Memory Technology Devices (MTD) -# +# CONFIG_CONNECTOR is not set # CONFIG_MTD is not set # @@ -401,21 +385,24 @@ CONFIG_PROC_EVENTS=y # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CDROM_PKTCDVD=y -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set -CONFIG_ATA_OVER_ETH=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set # # Misc devices # -CONFIG_SGI_IOC4=y +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_BLINK is not set # # ATA/ATAPI/MFM/RLL support @@ -425,7 +412,7 @@ CONFIG_SGI_IOC4=y # # SCSI device support # -CONFIG_RAID_ATTRS=y +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_NETLINK is not set @@ -471,27 +458,13 @@ CONFIG_NETDEVICES=y # # PHY device support # -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -CONFIG_MARVELL_PHY=y -CONFIG_DAVICOM_PHY=y -CONFIG_QSEMI_PHY=y -CONFIG_LXT_PHY=y -CONFIG_CICADA_PHY=y -CONFIG_VITESSE_PHY=y -CONFIG_SMSC_PHY=y -# CONFIG_BROADCOM_PHY is not set -# CONFIG_FIXED_PHY is not set +# CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_GALILEO_64240_ETH=y +# CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -503,6 +476,7 @@ CONFIG_GALILEO_64240_ETH=y # # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +CONFIG_NE2000=y # CONFIG_NET_PCI is not set # @@ -521,18 +495,18 @@ CONFIG_GALILEO_64240_ETH=y # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set -CONFIG_QLA3XXX=y +# CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=y +# CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=y +# CONFIG_NETXEN_NIC is not set # # Token Ring devices @@ -540,9 +514,10 @@ CONFIG_NETXEN_NIC=y # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) +# Wireless LAN # -# CONFIG_NET_RADIO is not set +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # # Wan interfaces @@ -570,29 +545,7 @@ CONFIG_NETXEN_NIC=y # # Input device support # -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +# CONFIG_INPUT is not set # # Hardware I/O ports @@ -601,34 +554,31 @@ CONFIG_SERIO=y # CONFIG_SERIO_I8042 is not set CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_LIBPS2 is not set -CONFIG_SERIO_RAW=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # # Character devices # -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set +# CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_TXX9=y +CONFIG_HAS_TXX9_SERIAL=y +CONFIG_SERIAL_TXX9_NR_UARTS=6 +CONFIG_SERIAL_TXX9_CONSOLE=y +CONFIG_SERIAL_TXX9_STDSERIAL=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y @@ -656,10 +606,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -672,12 +619,12 @@ CONFIG_LEGACY_PTY_COUNT=256 # Dallas's 1-wire bus # # CONFIG_W1 is not set +# CONFIG_HWMON is not set # -# Hardware Monitoring support +# Multifunction device drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_MFD_SM501 is not set # # Multimedia devices @@ -692,15 +639,14 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Graphics support # -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Console display driver support +# Display device support # -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_FB is not set # # Sound @@ -708,11 +654,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set # -# HID Devices -# -# CONFIG_HID is not set - -# # USB support # CONFIG_USB_ARCH_HAS_HCD=y @@ -728,10 +669,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set # @@ -759,7 +696,40 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # Real Time Clock # -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +CONFIG_RTC_DRV_DS1742=y +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# # # DMA Engine support @@ -785,9 +755,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # File systems # -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set @@ -801,10 +769,10 @@ CONFIG_FS_POSIX_ACL=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set -CONFIG_FUSE_FS=y +# CONFIG_FUSE_FS is not set CONFIG_GENERIC_ACL=y # @@ -824,21 +792,20 @@ CONFIG_GENERIC_ACL=y # Pseudo filesystems # CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y +# CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set -# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -855,17 +822,17 @@ CONFIG_CONFIGFS_FS=y # Network File Systems # CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set +# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y -CONFIG_EXPORTFS=y +CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -889,10 +856,7 @@ CONFIG_MSDOS_PARTITION=y # # Distributed Lock Manager # -CONFIG_DLM=y -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set +# CONFIG_DLM is not set # # Profiling support @@ -910,72 +874,29 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" +CONFIG_SYS_SUPPORTS_KGDB=y # # Security options # -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=y -CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_MD4=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA512=y -CONFIG_CRYPTO_WP512=y -CONFIG_CRYPTO_TGR192=y -CONFIG_CRYPTO_GF128MUL=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -CONFIG_CRYPTO_LRW=y -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_FCRYPT=y -CONFIG_CRYPTO_BLOWFISH=y -CONFIG_CRYPTO_TWOFISH=y -CONFIG_CRYPTO_TWOFISH_COMMON=y -CONFIG_CRYPTO_SERPENT=y -CONFIG_CRYPTO_AES=y -CONFIG_CRYPTO_CAST5=y -CONFIG_CRYPTO_CAST6=y -CONFIG_CRYPTO_TEA=y -CONFIG_CRYPTO_ARC4=y -CONFIG_CRYPTO_KHAZAD=y -CONFIG_CRYPTO_ANUBIS=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_MICHAEL_MIC=y -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CAMELLIA=y - -# -# Hardware crypto devices -# +# CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set -CONFIG_CRC16=y +# CONFIG_CRC16 is not set CONFIG_CRC32=y -CONFIG_LIBCRC32C=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +# CONFIG_LIBCRC32C is not set CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig index 7d0f2174614e..41011f770a67 100644 --- a/arch/mips/configs/rbhma4500_defconfig +++ b/arch/mips/configs/rbhma4500_defconfig @@ -89,7 +89,6 @@ CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_SWAP_IO_SPACE=y CONFIG_MIPS_L1_CACHE_SHIFT=5 CONFIG_HAVE_STD_PC_SERIAL_PORT=y -CONFIG_TOSHIBA_BOARDS=y # # CPU selection diff --git a/arch/mips/configs/tb0229_defconfig b/arch/mips/configs/tb0219_defconfig index 1756d2bdf6b8..8b1675c07ec4 100644 --- a/arch/mips/configs/tb0229_defconfig +++ b/arch/mips/configs/tb0219_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:41 2007 +# Linux kernel version: 2.6.21-rc6 +# Sun Apr 15 01:06:01 2007 # CONFIG_MIPS=y @@ -66,10 +66,11 @@ CONFIG_MACH_VR41XX=y # CONFIG_IBM_WORKPAD is not set # CONFIG_NEC_CMBVR4133 is not set CONFIG_TANBAC_TB022X=y -# CONFIG_TANBAC_TB0226 is not set -# CONFIG_TANBAC_TB0287 is not set # CONFIG_VICTOR_MPC30X is not set # CONFIG_ZAO_CAPCELLA is not set +CONFIG_TANBAC_TB0219=y +# CONFIG_TANBAC_TB0226 is not set +# CONFIG_TANBAC_TB0287 is not set CONFIG_PCI_VR41XX=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set @@ -184,6 +185,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_IKCONFIG is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -375,7 +377,7 @@ CONFIG_FIB_RULES=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=m # CONFIG_SYS_HYPERVISOR is not set # @@ -415,7 +417,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -646,7 +647,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -CONFIG_TANBAC_TB0219=y +CONFIG_GPIO_TB0219=y # CONFIG_DRM is not set CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set @@ -679,6 +680,11 @@ CONFIG_GPIO_VR41XX=y # CONFIG_HWMON_VID is not set # +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -692,7 +698,7 @@ CONFIG_GPIO_VR41XX=y # # Graphics support # -# CONFIG_FIRMWARE_EDID is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # CONFIG_FB is not set # @@ -700,7 +706,6 @@ CONFIG_GPIO_VR41XX=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -831,6 +836,7 @@ CONFIG_USB_MON=y # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # diff --git a/arch/mips/kernel/early_printk.c b/arch/mips/kernel/early_printk.c index 4fa54b230c09..9dccfa4752b2 100644 --- a/arch/mips/kernel/early_printk.c +++ b/arch/mips/kernel/early_printk.c @@ -12,7 +12,8 @@ extern void prom_putchar(char); -static void early_console_write(struct console *con, const char *s, unsigned n) +static void __init +early_console_write(struct console *con, const char *s, unsigned n) { while (n-- && *s) { if (*s == '\n') @@ -22,14 +23,20 @@ static void early_console_write(struct console *con, const char *s, unsigned n) } } -static struct console early_console = { +static struct console early_console __initdata = { .name = "early", .write = early_console_write, .flags = CON_PRINTBUFFER | CON_BOOT, .index = -1 }; +static int early_console_initialized __initdata; + void __init setup_early_printk(void) { + if (early_console_initialized) + return; + early_console_initialized = 1; + register_console(&early_console); } diff --git a/arch/mips/kernel/irq-msc01.c b/arch/mips/kernel/irq-msc01.c index 2967537221e2..410868b5ea5f 100644 --- a/arch/mips/kernel/irq-msc01.c +++ b/arch/mips/kernel/irq-msc01.c @@ -132,11 +132,11 @@ struct irq_chip msc_edgeirq_type = { }; -void __init init_msc_irqs(unsigned int base, msc_irqmap_t *imp, int nirq) +void __init init_msc_irqs(unsigned long icubase, unsigned int irqbase, msc_irqmap_t *imp, int nirq) { extern void (*board_bind_eic_interrupt)(unsigned int irq, unsigned int regset); - _icctrl_msc = (unsigned long) ioremap (MIPS_MSC01_IC_REG_BASE, 0x40000); + _icctrl_msc = (unsigned long) ioremap (icubase, 0x40000); /* Reset interrupt controller - initialises all registers to 0 */ MSCIC_WRITE(MSC01_IC_RST, MSC01_IC_RST_RST_BIT); @@ -148,14 +148,14 @@ void __init init_msc_irqs(unsigned int base, msc_irqmap_t *imp, int nirq) switch (imp->im_type) { case MSC01_IRQ_EDGE: - set_irq_chip(base+n, &msc_edgeirq_type); + set_irq_chip(irqbase+n, &msc_edgeirq_type); if (cpu_has_veic) MSCIC_WRITE(MSC01_IC_SUP+n*8, MSC01_IC_SUP_EDGE_BIT); else MSCIC_WRITE(MSC01_IC_SUP+n*8, MSC01_IC_SUP_EDGE_BIT | imp->im_lvl); break; case MSC01_IRQ_LEVEL: - set_irq_chip(base+n, &msc_levelirq_type); + set_irq_chip(irqbase+n, &msc_levelirq_type); if (cpu_has_veic) MSCIC_WRITE(MSC01_IC_SUP+n*8, 0); else @@ -163,7 +163,7 @@ void __init init_msc_irqs(unsigned int base, msc_irqmap_t *imp, int nirq) } } - irq_base = base; + irq_base = irqbase; MSCIC_WRITE(MSC01_IC_GENA, MSC01_IC_GENA_GENA_BIT); /* Enable interrupt generation */ diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c index 2fe4c868a801..aeded6c17de5 100644 --- a/arch/mips/kernel/irq.c +++ b/arch/mips/kernel/irq.c @@ -28,7 +28,7 @@ static unsigned long irq_map[NR_IRQS / BITS_PER_LONG]; -int __devinit allocate_irqno(void) +int allocate_irqno(void) { int irq; @@ -59,7 +59,7 @@ void __init alloc_legacy_irqno(void) BUG_ON(test_and_set_bit(i, irq_map)); } -void __devinit free_irqno(unsigned int irq) +void free_irqno(unsigned int irq) { smp_mb__before_clear_bit(); clear_bit(irq, irq_map); diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index e5e56bd498db..751b4a18b133 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -306,7 +306,7 @@ static unsigned int __init calibrate_hpt(void) struct clocksource clocksource_mips = { .name = "MIPS", - .mask = 0xffffffff, + .mask = CLOCKSOURCE_MASK(32), .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index ff45a4b8fbaa..200de027f354 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -927,9 +927,9 @@ asmlinkage void do_reserved(struct pt_regs *regs) (regs->cp0_cause & 0x7f) >> 2); } -asmlinkage void do_default_vi(struct pt_regs *regs) +static asmlinkage void do_default_vi(void) { - show_regs(regs); + show_regs(get_irq_regs()); panic("Caught unexpected vectored interrupt."); } @@ -1128,7 +1128,7 @@ void mips_srs_free(int set) clear_bit(set, &sr->sr_allocated); } -static void *set_vi_srs_handler(int n, void *addr, int srs) +static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs) { unsigned long handler; unsigned long old_handler = vi_handlers[n]; @@ -1217,7 +1217,7 @@ static void *set_vi_srs_handler(int n, void *addr, int srs) return (void *)old_handler; } -void *set_vi_handler(int n, void *addr) +void *set_vi_handler(int n, vi_handler_t addr) { return set_vi_srs_handler(n, addr, 0); } diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index d7d3b14dcfb2..5dad13efba7e 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -9,4 +9,4 @@ obj-y += iomap.o obj-$(CONFIG_PCI) += iomap-pci.o # libgcc-style stuff needed in the kernel -lib-y += ashldi3.o ashrdi3.o lshrdi3.o +lib-y += ashldi3.o ashrdi3.o lshrdi3.o ucmpdi2.o diff --git a/arch/mips/lib/ucmpdi2.c b/arch/mips/lib/ucmpdi2.c new file mode 100644 index 000000000000..e9ff258ef028 --- /dev/null +++ b/arch/mips/lib/ucmpdi2.c @@ -0,0 +1,19 @@ +#include <linux/module.h> + +#include "libgcc.h" + +word_type __ucmpdi2 (unsigned long a, unsigned long b) +{ + const DWunion au = {.ll = a}; + const DWunion bu = {.ll = b}; + + if ((unsigned int) au.s.high < (unsigned int) bu.s.high) + return 0; + else if ((unsigned int) au.s.high > (unsigned int) bu.s.high) + return 2; + if ((unsigned int) au.s.low < (unsigned int) bu.s.low) + return 0; + else if ((unsigned int) au.s.low > (unsigned int) bu.s.low) + return 2; + return 1; +} diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c index 83d76025d61d..1cd830e3d933 100644 --- a/arch/mips/mips-boards/malta/malta_int.c +++ b/arch/mips/mips-boards/malta/malta_int.c @@ -311,16 +311,21 @@ void __init arch_init_irq(void) if (!cpu_has_veic) mips_cpu_irq_init(); - switch(mips_revision_corid) { - case MIPS_REVISION_CORID_CORE_MSC: - case MIPS_REVISION_CORID_CORE_FPGA2: - case MIPS_REVISION_CORID_CORE_FPGA3: - case MIPS_REVISION_CORID_CORE_24K: - case MIPS_REVISION_CORID_CORE_EMUL_MSC: + switch(mips_revision_sconid) { + case MIPS_REVISION_SCON_SOCIT: + case MIPS_REVISION_SCON_ROCIT: + if (cpu_has_veic) + init_msc_irqs (MIPS_MSC01_IC_REG_BASE, MSC01E_INT_BASE, msc_eicirqmap, msc_nr_eicirqs); + else + init_msc_irqs (MIPS_MSC01_IC_REG_BASE, MSC01C_INT_BASE, msc_irqmap, msc_nr_irqs); + break; + + case MIPS_REVISION_SCON_SOCITSC: + case MIPS_REVISION_SCON_SOCITSCP: if (cpu_has_veic) - init_msc_irqs (MSC01E_INT_BASE, msc_eicirqmap, msc_nr_eicirqs); + init_msc_irqs (MIPS_SOCITSC_IC_REG_BASE, MSC01E_INT_BASE, msc_eicirqmap, msc_nr_eicirqs); else - init_msc_irqs (MSC01C_INT_BASE, msc_irqmap, msc_nr_irqs); + init_msc_irqs (MIPS_SOCITSC_IC_REG_BASE, MSC01C_INT_BASE, msc_irqmap, msc_nr_irqs); } if (cpu_has_veic) { diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c index 675502ada5a2..10dd2af2343b 100644 --- a/arch/mips/mm/highmem.c +++ b/arch/mips/mm/highmem.c @@ -80,7 +80,6 @@ void __kunmap_atomic(void *kvaddr, enum km_type type) pagefault_enable(); } -#ifndef CONFIG_LIMITED_DMA /* * This is the same as kmap_atomic() but can map memory that doesn't * have a struct page associated with it. @@ -99,7 +98,6 @@ void *kmap_atomic_pfn(unsigned long pfn, enum km_type type) return (void*) vaddr; } -#endif /* CONFIG_LIMITED_DMA */ struct page *__kmap_atomic_to_page(void *ptr) { diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 2d1c2c024822..4c80528deadd 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -424,9 +424,6 @@ void __init mem_init(void) continue; } ClearPageReserved(page); -#ifdef CONFIG_LIMITED_DMA - set_page_address(page, lowmem_page_address(page)); -#endif init_page_count(page); __free_page(page); totalhigh_pages++; diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 492c518e7ba5..e7149290d1cb 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -35,24 +35,24 @@ #include <asm/smp.h> #include <asm/war.h> -static __init int __attribute__((unused)) r45k_bvahwbug(void) +static __init int __maybe_unused r45k_bvahwbug(void) { /* XXX: We should probe for the presence of this bug, but we don't. */ return 0; } -static __init int __attribute__((unused)) r4k_250MHZhwbug(void) +static __init int __maybe_unused r4k_250MHZhwbug(void) { /* XXX: We should probe for the presence of this bug, but we don't. */ return 0; } -static __init int __attribute__((unused)) bcm1250_m3_war(void) +static __init int __maybe_unused bcm1250_m3_war(void) { return BCM1250_M3_WAR; } -static __init int __attribute__((unused)) r10000_llsc_war(void) +static __init int __maybe_unused r10000_llsc_war(void) { return R10000_LLSC_WAR; } @@ -511,18 +511,18 @@ L_LA(_r3000_write_probe_fail) #define i_ehb(buf) i_sll(buf, 0, 0, 3) #ifdef CONFIG_64BIT -static __init int __attribute__((unused)) in_compat_space_p(long addr) +static __init int __maybe_unused in_compat_space_p(long addr) { /* Is this address in 32bit compat space? */ return (((addr) & 0xffffffff00000000L) == 0xffffffff00000000L); } -static __init int __attribute__((unused)) rel_highest(long val) +static __init int __maybe_unused rel_highest(long val) { return ((((val + 0x800080008000L) >> 48) & 0xffff) ^ 0x8000) - 0x8000; } -static __init int __attribute__((unused)) rel_higher(long val) +static __init int __maybe_unused rel_higher(long val) { return ((((val + 0x80008000L) >> 32) & 0xffff) ^ 0x8000) - 0x8000; } @@ -556,8 +556,8 @@ static __init void i_LA_mostly(u32 **buf, unsigned int rs, long addr) i_lui(buf, rs, rel_hi(addr)); } -static __init void __attribute__((unused)) i_LA(u32 **buf, unsigned int rs, - long addr) +static __init void __maybe_unused i_LA(u32 **buf, unsigned int rs, + long addr) { i_LA_mostly(buf, rs, addr); if (rel_lo(addr)) @@ -636,8 +636,8 @@ static __init void copy_handler(struct reloc *rel, struct label *lab, move_labels(lab, first, end, off); } -static __init int __attribute__((unused)) insn_has_bdelay(struct reloc *rel, - u32 *addr) +static __init int __maybe_unused insn_has_bdelay(struct reloc *rel, + u32 *addr) { for (; rel->lab != label_invalid; rel++) { if (rel->addr == addr @@ -650,15 +650,15 @@ static __init int __attribute__((unused)) insn_has_bdelay(struct reloc *rel, } /* convenience functions for labeled branches */ -static void __init __attribute__((unused)) +static void __init __maybe_unused il_bltz(u32 **p, struct reloc **r, unsigned int reg, enum label_id l) { r_mips_pc16(r, *p, l); i_bltz(p, reg, 0); } -static void __init __attribute__((unused)) il_b(u32 **p, struct reloc **r, - enum label_id l) +static void __init __maybe_unused il_b(u32 **p, struct reloc **r, + enum label_id l) { r_mips_pc16(r, *p, l); i_b(p, 0); @@ -671,7 +671,7 @@ static void __init il_beqz(u32 **p, struct reloc **r, unsigned int reg, i_beqz(p, reg, 0); } -static void __init __attribute__((unused)) +static void __init __maybe_unused il_beqzl(u32 **p, struct reloc **r, unsigned int reg, enum label_id l) { r_mips_pc16(r, *p, l); @@ -692,7 +692,7 @@ static void __init il_bgezl(u32 **p, struct reloc **r, unsigned int reg, i_bgezl(p, reg, 0); } -static void __init __attribute__((unused)) +static void __init __maybe_unused il_bgez(u32 **p, struct reloc **r, unsigned int reg, enum label_id l) { r_mips_pc16(r, *p, l); @@ -810,7 +810,7 @@ static __initdata u32 final_handler[64]; * * As if we MIPS hackers wouldn't know how to nop pipelines happy ... */ -static __init void __attribute__((unused)) build_tlb_probe_entry(u32 **p) +static __init void __maybe_unused build_tlb_probe_entry(u32 **p) { switch (current_cpu_data.cputype) { /* Found by experiment: R4600 v2.0 needs this, too. */ @@ -1098,7 +1098,7 @@ build_get_pgd_vmalloc64(u32 **p, struct label **l, struct reloc **r, * TMP and PTR are scratch. * TMP will be clobbered, PTR will hold the pgd entry. */ -static __init void __attribute__((unused)) +static __init void __maybe_unused build_get_pgde32(u32 **p, unsigned int tmp, unsigned int ptr) { long pgdc = (long)pgd_current; diff --git a/arch/mips/momentum/Kconfig b/arch/mips/momentum/Kconfig deleted file mode 100644 index 70a61cf7174d..000000000000 --- a/arch/mips/momentum/Kconfig +++ /dev/null @@ -1,6 +0,0 @@ -config JAGUAR_DMALOW - bool "Low DMA Mode" - depends on MOMENCO_JAGUAR_ATX - help - Select to Y if jump JP5 is set on your board, N otherwise. Normally - the jumper is set, so if you feel unsafe, just say Y. diff --git a/arch/mips/momentum/jaguar_atx/Makefile b/arch/mips/momentum/jaguar_atx/Makefile deleted file mode 100644 index 2e8cebd49bc0..000000000000 --- a/arch/mips/momentum/jaguar_atx/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# -# Makefile for Momentum Computer's Jaguar-ATX board. -# -# Note! Dependencies are done automagically by 'make dep', which also -# removes any old dependencies. DON'T put your own dependencies here -# unless it's something special (ie not a .c file). -# - -obj-y += irq.o platform.o prom.o reset.o setup.o - -obj-$(CONFIG_SERIAL_8250_CONSOLE) += ja-console.o -obj-$(CONFIG_REMOTE_DEBUG) += dbg_io.o diff --git a/arch/mips/momentum/jaguar_atx/dbg_io.c b/arch/mips/momentum/jaguar_atx/dbg_io.c deleted file mode 100644 index b85a6521f72d..000000000000 --- a/arch/mips/momentum/jaguar_atx/dbg_io.c +++ /dev/null @@ -1,125 +0,0 @@ - -#if defined(CONFIG_REMOTE_DEBUG) - -#include <asm/serial.h> /* For the serial port location and base baud */ - -/* --- CONFIG --- */ - -typedef unsigned char uint8; -typedef unsigned int uint32; - -/* --- END OF CONFIG --- */ - -#define UART16550_BAUD_2400 2400 -#define UART16550_BAUD_4800 4800 -#define UART16550_BAUD_9600 9600 -#define UART16550_BAUD_19200 19200 -#define UART16550_BAUD_38400 38400 -#define UART16550_BAUD_57600 57600 -#define UART16550_BAUD_115200 115200 - -#define UART16550_PARITY_NONE 0 -#define UART16550_PARITY_ODD 0x08 -#define UART16550_PARITY_EVEN 0x18 -#define UART16550_PARITY_MARK 0x28 -#define UART16550_PARITY_SPACE 0x38 - -#define UART16550_DATA_5BIT 0x0 -#define UART16550_DATA_6BIT 0x1 -#define UART16550_DATA_7BIT 0x2 -#define UART16550_DATA_8BIT 0x3 - -#define UART16550_STOP_1BIT 0x0 -#define UART16550_STOP_2BIT 0x4 - -/* ----------------------------------------------------- */ - -/* === CONFIG === */ - -/* [jsun] we use the second serial port for kdb */ -#define BASE OCELOT_SERIAL1_BASE -#define MAX_BAUD OCELOT_BASE_BAUD - -/* === END OF CONFIG === */ - -#define REG_OFFSET 4 - -/* register offset */ -#define OFS_RCV_BUFFER 0 -#define OFS_TRANS_HOLD 0 -#define OFS_SEND_BUFFER 0 -#define OFS_INTR_ENABLE (1*REG_OFFSET) -#define OFS_INTR_ID (2*REG_OFFSET) -#define OFS_DATA_FORMAT (3*REG_OFFSET) -#define OFS_LINE_CONTROL (3*REG_OFFSET) -#define OFS_MODEM_CONTROL (4*REG_OFFSET) -#define OFS_RS232_OUTPUT (4*REG_OFFSET) -#define OFS_LINE_STATUS (5*REG_OFFSET) -#define OFS_MODEM_STATUS (6*REG_OFFSET) -#define OFS_RS232_INPUT (6*REG_OFFSET) -#define OFS_SCRATCH_PAD (7*REG_OFFSET) - -#define OFS_DIVISOR_LSB (0*REG_OFFSET) -#define OFS_DIVISOR_MSB (1*REG_OFFSET) - - -/* memory-mapped read/write of the port */ -#define UART16550_READ(y) (*((volatile uint8*)(BASE + y))) -#define UART16550_WRITE(y, z) ((*((volatile uint8*)(BASE + y))) = z) - -void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) -{ - /* disable interrupts */ - UART16550_WRITE(OFS_INTR_ENABLE, 0); - - /* set up baud rate */ - { - uint32 divisor; - - /* set DIAB bit */ - UART16550_WRITE(OFS_LINE_CONTROL, 0x80); - - /* set divisor */ - divisor = MAX_BAUD / baud; - UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff); - UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8); - - /* clear DIAB bit */ - UART16550_WRITE(OFS_LINE_CONTROL, 0x0); - } - - /* set data format */ - UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop); -} - -static int remoteDebugInitialized = 0; - -uint8 getDebugChar(void) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(UART16550_BAUD_38400, - UART16550_DATA_8BIT, - UART16550_PARITY_NONE, UART16550_STOP_1BIT); - } - - while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0); - return UART16550_READ(OFS_RCV_BUFFER); -} - - -int putDebugChar(uint8 byte) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(UART16550_BAUD_38400, - UART16550_DATA_8BIT, - UART16550_PARITY_NONE, UART16550_STOP_1BIT); - } - - while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0); - UART16550_WRITE(OFS_SEND_BUFFER, byte); - return 1; -} - -#endif diff --git a/arch/mips/momentum/jaguar_atx/irq.c b/arch/mips/momentum/jaguar_atx/irq.c deleted file mode 100644 index f2b432585df2..000000000000 --- a/arch/mips/momentum/jaguar_atx/irq.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * Copyright (C) 2002 Momentum Computer, Inc. - * Author: Matthew Dharm, mdharm@momenco.com - * - * Based on work by: - * Copyright (C) 2000 RidgeRun, Inc. - * Author: RidgeRun, Inc. - * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com - * - * Copyright 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * Copyright (C) 2000, 01, 06 Ralf Baechle (ralf@linux-mips.org) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/signal.h> -#include <linux/types.h> -#include <asm/irq_cpu.h> -#include <asm/mipsregs.h> -#include <asm/time.h> - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_cause() & read_c0_status(); - - if (pending & STATUSF_IP0) - do_IRQ(0); - else if (pending & STATUSF_IP1) - do_IRQ(1); - else if (pending & STATUSF_IP2) - do_IRQ(2); - else if (pending & STATUSF_IP3) - do_IRQ(3); - else if (pending & STATUSF_IP4) - do_IRQ(4); - else if (pending & STATUSF_IP5) - do_IRQ(5); - else if (pending & STATUSF_IP6) - do_IRQ(6); - else if (pending & STATUSF_IP7) - ll_timer_interrupt(7); - else { - /* - * Now look at the extended interrupts - */ - pending = (read_c0_cause() & (read_c0_intcontrol() << 8)) >> 16; - if (pending & STATUSF_IP8) - ll_mv64340_irq(); - } -} - -static struct irqaction cascade_mv64340 = { - no_action, IRQF_DISABLED, CPU_MASK_NONE, "MV64340-Cascade", NULL, NULL -}; - -void __init arch_init_irq(void) -{ - /* - * Clear all of the interrupts while we change the able around a bit. - * int-handler is not on bootstrap - */ - clear_c0_status(ST0_IM); - - mips_cpu_irq_init(); - rm7k_cpu_irq_init(); - - /* set up the cascading interrupts */ - setup_irq(8, &cascade_mv64340); - - mv64340_irq_init(16); - - set_c0_status(ST0_IM); -} diff --git a/arch/mips/momentum/jaguar_atx/ja-console.c b/arch/mips/momentum/jaguar_atx/ja-console.c deleted file mode 100644 index 2c30b4f56245..000000000000 --- a/arch/mips/momentum/jaguar_atx/ja-console.c +++ /dev/null @@ -1,101 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001, 2002, 2004 Ralf Baechle - */ -#include <linux/init.h> -#include <linux/console.h> -#include <linux/kdev_t.h> -#include <linux/major.h> -#include <linux/termios.h> -#include <linux/sched.h> -#include <linux/tty.h> - -#include <linux/serial.h> -#include <linux/serial_core.h> -#include <asm/serial.h> - -/* SUPERIO uart register map */ -struct ja_uartregs { - union { - volatile u8 pad0[3]; - volatile u8 rbr; /* read only, DLAB == 0 */ - volatile u8 pad1[3]; - volatile u8 thr; /* write only, DLAB == 0 */ - volatile u8 pad2[3]; - volatile u8 dll; /* DLAB == 1 */ - } u1; - union { - volatile u8 pad0[3]; - volatile u8 ier; /* DLAB == 0 */ - volatile u8 pad1[3]; - volatile u8 dlm; /* DLAB == 1 */ - } u2; - union { - volatile u8 pad0[3]; - volatile u8 iir; /* read only */ - volatile u8 pad1[3]; - volatile u8 fcr; /* write only */ - } u3; - volatile u8 pad0[3]; - volatile u8 iu_lcr; - volatile u8 pad1[3]; - volatile u8 iu_mcr; - volatile u8 pad2[3]; - volatile u8 iu_lsr; - volatile u8 pad3[3]; - volatile u8 iu_msr; - volatile u8 pad4[3]; - volatile u8 iu_scr; -} ja_uregs_t; - -#define iu_rbr u1.rbr -#define iu_thr u1.thr -#define iu_dll u1.dll -#define iu_ier u2.ier -#define iu_dlm u2.dlm -#define iu_iir u3.iir -#define iu_fcr u3.fcr - -extern unsigned long uart_base; - -static inline struct ja_uartregs *console_uart(void) -{ - return (struct ja_uartregs *) (uart_base + 0x23UL); -} - -void prom_putchar(char c) -{ - struct ja_uartregs *uart = console_uart(); - - while ((uart->iu_lsr & 0x20) == 0); - uart->iu_thr = c; -} - -static void inline ja_console_probe(void) -{ - struct uart_port up; - - /* - * Register to interrupt zero because we share the interrupt with - * the serial driver which we don't properly support yet. - */ - memset(&up, 0, sizeof(up)); - up.membase = (unsigned char *) uart_base + 0x23UL; - up.irq = JAGUAR_ATX_SERIAL1_IRQ; - up.uartclk = JAGUAR_ATX_UART_CLK; - up.regshift = 2; - up.iotype = UPIO_MEM; - up.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; - up.line = 0; - - if (early_serial_setup(&up)) - printk(KERN_ERR "Early serial init of port 0 failed\n"); -} - -__init void ja_setup_console(void) -{ - ja_console_probe(); -} diff --git a/arch/mips/momentum/jaguar_atx/jaguar_atx_fpga.h b/arch/mips/momentum/jaguar_atx/jaguar_atx_fpga.h deleted file mode 100644 index 022f6974b76e..000000000000 --- a/arch/mips/momentum/jaguar_atx/jaguar_atx_fpga.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * Jaguar-ATX Board Register Definitions - * - * (C) 2002 Momentum Computer Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#ifndef __JAGUAR_ATX_FPGA_H__ -#define __JAGUAR_ATX_FPGA_H__ - -#define JAGUAR_ATX_REG_BOARDREV 0x0 -#define JAGUAR_ATX_REG_FPGA_REV 0x1 -#define JAGUAR_ATX_REG_FPGA_TYPE 0x2 -#define JAGUAR_ATX_REG_RESET_STATUS 0x3 -#define JAGUAR_ATX_REG_BOARD_STATUS 0x4 -#define JAGUAR_ATX_REG_RESERVED1 0x5 -#define JAGUAR_ATX_REG_SET 0x6 -#define JAGUAR_ATX_REG_CLR 0x7 -#define JAGUAR_ATX_REG_EEPROM_MODE 0x9 -#define JAGUAR_ATX_REG_RESERVED2 0xa -#define JAGUAR_ATX_REG_RESERVED3 0xb -#define JAGUAR_ATX_REG_RESERVED4 0xc -#define JAGUAR_ATX_REG_PHY_INTSTAT 0xd -#define JAGUAR_ATX_REG_RESERVED5 0xe -#define JAGUAR_ATX_REG_RESERVED6 0xf - -#define JAGUAR_ATX_CS0_ADDR 0xfc000000L - -extern unsigned long ja_fpga_base; - -#define __FPGA_REG_TO_ADDR(reg) \ - ((void *) ja_fpga_base + JAGUAR_ATX_REG_##reg) -#define JAGUAR_FPGA_WRITE(x, reg) writeb(x, __FPGA_REG_TO_ADDR(reg)) -#define JAGUAR_FPGA_READ(reg) readb(__FPGA_REG_TO_ADDR(reg)) - -#endif diff --git a/arch/mips/momentum/jaguar_atx/platform.c b/arch/mips/momentum/jaguar_atx/platform.c deleted file mode 100644 index 561844878a90..000000000000 --- a/arch/mips/momentum/jaguar_atx/platform.c +++ /dev/null @@ -1,208 +0,0 @@ -#include <linux/delay.h> -#include <linux/if_ether.h> -#include <linux/ioport.h> -#include <linux/mv643xx.h> -#include <linux/platform_device.h> - -#include "jaguar_atx_fpga.h" - -#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE) - -static struct resource mv643xx_eth_shared_resources[] = { - [0] = { - .name = "ethernet shared base", - .start = 0xf1000000 + MV643XX_ETH_SHARED_REGS, - .end = 0xf1000000 + MV643XX_ETH_SHARED_REGS + - MV643XX_ETH_SHARED_REGS_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device mv643xx_eth_shared_device = { - .name = MV643XX_ETH_SHARED_NAME, - .id = 0, - .num_resources = ARRAY_SIZE(mv643xx_eth_shared_resources), - .resource = mv643xx_eth_shared_resources, -}; - -#define MV_SRAM_BASE 0xfe000000UL -#define MV_SRAM_SIZE (256 * 1024) - -#define MV_SRAM_RXRING_SIZE (MV_SRAM_SIZE / 4) -#define MV_SRAM_TXRING_SIZE (MV_SRAM_SIZE / 4) - -#define MV_SRAM_BASE_ETH0 MV_SRAM_BASE -#define MV_SRAM_BASE_ETH1 (MV_SRAM_BASE + (MV_SRAM_SIZE / 2)) - -#define MV64x60_IRQ_ETH_0 48 -#define MV64x60_IRQ_ETH_1 49 -#define MV64x60_IRQ_ETH_2 50 - -static struct resource mv64x60_eth0_resources[] = { - [0] = { - .name = "eth0 irq", - .start = MV64x60_IRQ_ETH_0, - .end = MV64x60_IRQ_ETH_0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct mv643xx_eth_platform_data eth0_pd = { - .port_number = 0, - - .tx_sram_addr = MV_SRAM_BASE_ETH0, - .tx_sram_size = MV_SRAM_TXRING_SIZE, - .tx_queue_size = MV_SRAM_TXRING_SIZE / 16, - - .rx_sram_addr = MV_SRAM_BASE_ETH0 + MV_SRAM_TXRING_SIZE, - .rx_sram_size = MV_SRAM_RXRING_SIZE, - .rx_queue_size = MV_SRAM_RXRING_SIZE / 16, -}; - -static struct platform_device eth0_device = { - .name = MV643XX_ETH_NAME, - .id = 0, - .num_resources = ARRAY_SIZE(mv64x60_eth0_resources), - .resource = mv64x60_eth0_resources, - .dev = { - .platform_data = ð0_pd, - }, -}; - -static struct resource mv64x60_eth1_resources[] = { - [0] = { - .name = "eth1 irq", - .start = MV64x60_IRQ_ETH_1, - .end = MV64x60_IRQ_ETH_1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct mv643xx_eth_platform_data eth1_pd = { - .port_number = 1, - - .tx_sram_addr = MV_SRAM_BASE_ETH1, - .tx_sram_size = MV_SRAM_TXRING_SIZE, - .tx_queue_size = MV_SRAM_TXRING_SIZE / 16, - - .rx_sram_addr = MV_SRAM_BASE_ETH1 + MV_SRAM_TXRING_SIZE, - .rx_sram_size = MV_SRAM_RXRING_SIZE, - .rx_queue_size = MV_SRAM_RXRING_SIZE / 16, -}; - -static struct platform_device eth1_device = { - .name = MV643XX_ETH_NAME, - .id = 1, - .num_resources = ARRAY_SIZE(mv64x60_eth1_resources), - .resource = mv64x60_eth1_resources, - .dev = { - .platform_data = ð1_pd, - }, -}; - -static struct resource mv64x60_eth2_resources[] = { - [0] = { - .name = "eth2 irq", - .start = MV64x60_IRQ_ETH_2, - .end = MV64x60_IRQ_ETH_2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct mv643xx_eth_platform_data eth2_pd = { - .port_number = 2, -}; - -static struct platform_device eth2_device = { - .name = MV643XX_ETH_NAME, - .id = 2, - .num_resources = ARRAY_SIZE(mv64x60_eth2_resources), - .resource = mv64x60_eth2_resources, - .dev = { - .platform_data = ð2_pd, - }, -}; - -static struct platform_device *mv643xx_eth_pd_devs[] __initdata = { - &mv643xx_eth_shared_device, - ð0_device, - ð1_device, - ð2_device, -}; - -static u8 __init exchange_bit(u8 val, u8 cs) -{ - /* place the data */ - JAGUAR_FPGA_WRITE((val << 2) | cs, EEPROM_MODE); - udelay(1); - - /* turn the clock on */ - JAGUAR_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE); - udelay(1); - - /* turn the clock off and read-strobe */ - JAGUAR_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE); - - /* return the data */ - return (JAGUAR_FPGA_READ(EEPROM_MODE) >> 3) & 0x1; -} - -static void __init get_mac(char dest[6]) -{ - u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; - int i,j; - - for (i = 0; i < 12; i++) - exchange_bit(read_opcode[i], 1); - - for (j = 0; j < 6; j++) { - dest[j] = 0; - for (i = 0; i < 8; i++) { - dest[j] <<= 1; - dest[j] |= exchange_bit(0, 1); - } - } - - /* turn off CS */ - exchange_bit(0,0); -} - -/* - * Copy and increment ethernet MAC address by a small value. - * - * This is useful for systems where the only one MAC address is stored in - * non-volatile memory for multiple ports. - */ -static inline void eth_mac_add(unsigned char *dst, unsigned char *src, - unsigned int add) -{ - int i; - - BUG_ON(add >= 256); - - for (i = ETH_ALEN; i >= 0; i--) { - dst[i] = src[i] + add; - add = dst[i] < src[i]; /* compute carry */ - } - - WARN_ON(add); -} - -static int __init mv643xx_eth_add_pds(void) -{ - unsigned char mac[ETH_ALEN]; - int ret; - - get_mac(mac); - eth_mac_add(eth0_pd.mac_addr, mac, 0); - eth_mac_add(eth1_pd.mac_addr, mac, 1); - eth_mac_add(eth2_pd.mac_addr, mac, 2); - ret = platform_add_devices(mv643xx_eth_pd_devs, - ARRAY_SIZE(mv643xx_eth_pd_devs)); - - return ret; -} - -device_initcall(mv643xx_eth_add_pds); - -#endif /* defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE) */ diff --git a/arch/mips/momentum/jaguar_atx/prom.c b/arch/mips/momentum/jaguar_atx/prom.c deleted file mode 100644 index 5dd154ee58f6..000000000000 --- a/arch/mips/momentum/jaguar_atx/prom.c +++ /dev/null @@ -1,210 +0,0 @@ -/* - * Copyright 2002 Momentum Computer Inc. - * Author: Matthew Dharm <mdharm@momenco.com> - * - * Louis Hamilton, Red Hat, Inc. - * hamilton@redhat.com [MIPS64 modifications] - * - * Based on Ocelot Linux port, which is - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Added changes for SMP - Manish Lachwani (lachwani@pmc-sierra.com) - */ -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/bootmem.h> -#include <linux/mv643xx.h> - -#include <asm/addrspace.h> -#include <asm/bootinfo.h> -#include <asm/pmon.h> - -#include "jaguar_atx_fpga.h" - -extern void ja_setup_console(void); - -struct callvectors *debug_vectors; - -extern unsigned long cpu_clock; - -const char *get_system_type(void) -{ - return "Momentum Jaguar-ATX"; -} - -#ifdef CONFIG_64BIT - -unsigned long signext(unsigned long addr) -{ - addr &= 0xffffffff; - return (unsigned long)((int)addr); -} - -void *get_arg(unsigned long args, int arc) -{ - unsigned long ul; - unsigned char *puc, uc; - - args += (arc * 4); - ul = (unsigned long)signext(args); - puc = (unsigned char *)ul; - if (puc == 0) - return (void *)0; - -#ifdef CONFIG_CPU_LITTLE_ENDIAN - uc = *puc++; - l = (unsigned long)uc; - uc = *puc++; - ul |= (((unsigned long)uc) << 8); - uc = *puc++; - ul |= (((unsigned long)uc) << 16); - uc = *puc++; - ul |= (((unsigned long)uc) << 24); -#else - uc = *puc++; - ul = ((unsigned long)uc) << 24; - uc = *puc++; - ul |= (((unsigned long)uc) << 16); - uc = *puc++; - ul |= (((unsigned long)uc) << 8); - uc = *puc++; - ul |= ((unsigned long)uc); -#endif - ul = signext(ul); - - return (void *)ul; -} - -char *arg64(unsigned long addrin, int arg_index) -{ - unsigned long args; - char *p; - - args = signext(addrin); - p = (char *)get_arg(args, arg_index); - - return p; -} -#endif /* CONFIG_64BIT */ - -/* PMON passes arguments in C main() style */ -void __init prom_init(void) -{ - int argc = fw_arg0; - char **arg = (char **) fw_arg1; - char **env = (char **) fw_arg2; - struct callvectors *cv = (struct callvectors *) fw_arg3; - int i; - -#ifdef CONFIG_SERIAL_8250_CONSOLE -// ja_setup_console(); /* The very first thing. */ -#endif - -#ifdef CONFIG_64BIT - char *ptr; - - printk("Mips64 Jaguar-ATX\n"); - /* save the PROM vectors for debugging use */ - debug_vectors = (struct callvectors *)signext((unsigned long)cv); - - /* arg[0] is "g", the rest is boot parameters */ - arcs_cmdline[0] = '\0'; - - for (i = 1; i < argc; i++) { - ptr = (char *)arg64((unsigned long)arg, i); - if ((strlen(arcs_cmdline) + strlen(ptr) + 1) >= - sizeof(arcs_cmdline)) - break; - strcat(arcs_cmdline, ptr); - strcat(arcs_cmdline, " "); - } - - i = 0; - while (1) { - ptr = (char *)arg64((unsigned long)env, i); - if (! ptr) - break; - - if (strncmp("gtbase", ptr, strlen("gtbase")) == 0) { - marvell_base = simple_strtol(ptr + strlen("gtbase="), - NULL, 16); - - if ((marvell_base & 0xffffffff00000000) == 0) - marvell_base |= 0xffffffff00000000; - - printk("marvell_base set to 0x%016lx\n", marvell_base); - } - if (strncmp("cpuclock", ptr, strlen("cpuclock")) == 0) { - cpu_clock = simple_strtol(ptr + strlen("cpuclock="), - NULL, 10); - printk("cpu_clock set to %d\n", cpu_clock); - } - i++; - } - printk("arcs_cmdline: %s\n", arcs_cmdline); - -#else /* CONFIG_64BIT */ - /* save the PROM vectors for debugging use */ - debug_vectors = cv; - - /* arg[0] is "g", the rest is boot parameters */ - arcs_cmdline[0] = '\0'; - for (i = 1; i < argc; i++) { - if (strlen(arcs_cmdline) + strlen(arg[i] + 1) - >= sizeof(arcs_cmdline)) - break; - strcat(arcs_cmdline, arg[i]); - strcat(arcs_cmdline, " "); - } - - while (*env) { - if (strncmp("gtbase", *env, strlen("gtbase")) == 0) { - marvell_base = simple_strtol(*env + strlen("gtbase="), - NULL, 16); - } - if (strncmp("cpuclock", *env, strlen("cpuclock")) == 0) { - cpu_clock = simple_strtol(*env + strlen("cpuclock="), - NULL, 10); - } - env++; - } -#endif /* CONFIG_64BIT */ - mips_machgroup = MACH_GROUP_MOMENCO; - mips_machtype = MACH_MOMENCO_JAGUAR_ATX; -} - -void __init prom_free_prom_memory(void) -{ -} - -void __init prom_fixup_mem_map(unsigned long start, unsigned long end) -{ -} - -int prom_boot_secondary(int cpu, unsigned long sp, unsigned long gp) -{ - /* Clear the semaphore */ - *(volatile uint32_t *)(0xbb000a68) = 0x80000000; - - return 1; -} - -void prom_init_secondary(void) -{ - clear_c0_config(CONF_CM_CMASK); - set_c0_config(0x2); - - clear_c0_status(ST0_IM); - set_c0_status(0x1ffff); -} - -void prom_smp_finish(void) -{ -} diff --git a/arch/mips/momentum/jaguar_atx/reset.c b/arch/mips/momentum/jaguar_atx/reset.c deleted file mode 100644 index c73b0897dc52..000000000000 --- a/arch/mips/momentum/jaguar_atx/reset.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Copyright (C) 1997, 2001 Ralf Baechle - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * Copyright (C) 2002 Momentum Computer Inc. - * Author: Matthew Dharm <mdharm@momenco.com> - * - * Louis Hamilton, Red Hat, Inc. - * hamilton@redhat.com [MIPS64 modifications] - */ -#include <linux/sched.h> -#include <linux/mm.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/processor.h> -#include <asm/reboot.h> -#include <asm/system.h> -#include <linux/delay.h> - -void momenco_jaguar_restart(char *command) -{ - /* base address of timekeeper portion of part */ -#ifdef CONFIG_64BIT - void *nvram = (void*) 0xfffffffffc807000; -#else - void *nvram = (void*) 0xfc807000; -#endif - /* Ask the NVRAM/RTC/watchdog chip to assert reset in 1/16 second */ - writeb(0x84, nvram + 0xff7); - - /* wait for the watchdog to go off */ - mdelay(100+(1000/16)); - - /* if the watchdog fails for some reason, let people know */ - printk(KERN_NOTICE "Watchdog reset failed\n"); -} - -void momenco_jaguar_halt(void) -{ - printk(KERN_NOTICE "\n** You can safely turn off the power\n"); - while (1) - __asm__(".set\tmips3\n\t" - "wait\n\t" - ".set\tmips0"); -} - -void momenco_jaguar_power_off(void) -{ - momenco_jaguar_halt(); -} diff --git a/arch/mips/momentum/jaguar_atx/setup.c b/arch/mips/momentum/jaguar_atx/setup.c deleted file mode 100644 index 5a510142b978..000000000000 --- a/arch/mips/momentum/jaguar_atx/setup.c +++ /dev/null @@ -1,475 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Momentum Computer Jaguar-ATX board dependent boot routines - * - * Copyright (C) 1996, 1997, 2001, 04, 06 Ralf Baechle (ralf@linux-mips.org) - * Copyright (C) 2000 RidgeRun, Inc. - * Copyright (C) 2001 Red Hat, Inc. - * Copyright (C) 2002 Momentum Computer - * - * Author: Matthew Dharm, Momentum Computer - * mdharm@momenco.com - * - * Louis Hamilton, Red Hat, Inc. - * hamilton@redhat.com [MIPS64 modifications] - * - * Author: RidgeRun, Inc. - * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com - * - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/bcd.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/mm.h> -#include <linux/bootmem.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/swap.h> -#include <linux/ioport.h> -#include <linux/pm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/timex.h> -#include <linux/vmalloc.h> -#include <linux/mv643xx.h> - -#include <asm/time.h> -#include <asm/bootinfo.h> -#include <asm/page.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/processor.h> -#include <asm/reboot.h> -#include <asm/tlbflush.h> - -#include "jaguar_atx_fpga.h" - -extern unsigned long mv64340_sram_base; -unsigned long cpu_clock; - -/* These functions are used for rebooting or halting the machine*/ -extern void momenco_jaguar_restart(char *command); -extern void momenco_jaguar_halt(void); -extern void momenco_jaguar_power_off(void); - -void momenco_time_init(void); - -static char reset_reason; - -static inline unsigned long ENTRYLO(unsigned long paddr) -{ - return ((paddr & PAGE_MASK) | - (_PAGE_PRESENT | __READABLE | __WRITEABLE | _PAGE_GLOBAL | - _CACHE_UNCACHED)) >> 6; -} - -void __init bus_error_init(void) { /* nothing */ } - -/* - * Load a few TLB entries for the MV64340 and perhiperals. The MV64340 is going - * to be hit on every IRQ anyway - there's absolutely no point in letting it be - * a random TLB entry, as it'll just cause needless churning of the TLB. And we - * use the other half for the serial port, which is just a PITA otherwise :) - * - * Device Physical Virtual - * MV64340 Internal Regs 0xf4000000 0xf4000000 - * Ocelot-C[S] PLD (CS0) 0xfc000000 0xfc000000 - * NVRAM (CS1) 0xfc800000 0xfc800000 - * UARTs (CS2) 0xfd000000 0xfd000000 - * Internal SRAM 0xfe000000 0xfe000000 - * M-Systems DOC (CS3) 0xff000000 0xff000000 - */ - -static __init void wire_stupidity_into_tlb(void) -{ -#ifdef CONFIG_32BIT - write_c0_wired(0); - local_flush_tlb_all(); - - /* marvell and extra space */ - add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000), - 0xf4000000UL, PM_64K); - /* fpga, rtc, and uart */ - add_wired_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfd000000), - 0xfc000000UL, PM_16M); -// /* m-sys and internal SRAM */ -// add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000), -// 0xfe000000UL, PM_16M); - - marvell_base = 0xf4000000; - //mv64340_sram_base = 0xfe000000; /* Currently unused */ -#endif -} - -unsigned long marvell_base = 0xf4000000L; -unsigned long ja_fpga_base = JAGUAR_ATX_CS0_ADDR; -unsigned long uart_base = 0xfd000000L; -static unsigned char *rtc_base = (unsigned char*) 0xfc800000L; - -EXPORT_SYMBOL(marvell_base); - -static __init int per_cpu_mappings(void) -{ - marvell_base = (unsigned long) ioremap(0xf4000000, 0x10000); - ja_fpga_base = (unsigned long) ioremap(JAGUAR_ATX_CS0_ADDR, 0x1000); - uart_base = (unsigned long) ioremap(0xfd000000UL, 0x1000); - rtc_base = ioremap(0xfc000000UL, 0x8000); - // ioremap(0xfe000000, 32 << 20); - write_c0_wired(0); - local_flush_tlb_all(); - ja_setup_console(); - - return 0; -} -arch_initcall(per_cpu_mappings); - -unsigned long m48t37y_get_time(void) -{ - unsigned int year, month, day, hour, min, sec; - unsigned long flags; - - spin_lock_irqsave(&rtc_lock, flags); - /* stop the update */ - rtc_base[0x7ff8] = 0x40; - - year = BCD2BIN(rtc_base[0x7fff]); - year += BCD2BIN(rtc_base[0x7ff1]) * 100; - - month = BCD2BIN(rtc_base[0x7ffe]); - - day = BCD2BIN(rtc_base[0x7ffd]); - - hour = BCD2BIN(rtc_base[0x7ffb]); - min = BCD2BIN(rtc_base[0x7ffa]); - sec = BCD2BIN(rtc_base[0x7ff9]); - - /* start the update */ - rtc_base[0x7ff8] = 0x00; - spin_unlock_irqrestore(&rtc_lock, flags); - - return mktime(year, month, day, hour, min, sec); -} - -int m48t37y_set_time(unsigned long sec) -{ - struct rtc_time tm; - unsigned long flags; - - /* convert to a more useful format -- note months count from 0 */ - to_tm(sec, &tm); - tm.tm_mon += 1; - - spin_lock_irqsave(&rtc_lock, flags); - /* enable writing */ - rtc_base[0x7ff8] = 0x80; - - /* year */ - rtc_base[0x7fff] = BIN2BCD(tm.tm_year % 100); - rtc_base[0x7ff1] = BIN2BCD(tm.tm_year / 100); - - /* month */ - rtc_base[0x7ffe] = BIN2BCD(tm.tm_mon); - - /* day */ - rtc_base[0x7ffd] = BIN2BCD(tm.tm_mday); - - /* hour/min/sec */ - rtc_base[0x7ffb] = BIN2BCD(tm.tm_hour); - rtc_base[0x7ffa] = BIN2BCD(tm.tm_min); - rtc_base[0x7ff9] = BIN2BCD(tm.tm_sec); - - /* day of week -- not really used, but let's keep it up-to-date */ - rtc_base[0x7ffc] = BIN2BCD(tm.tm_wday + 1); - - /* disable writing */ - rtc_base[0x7ff8] = 0x00; - spin_unlock_irqrestore(&rtc_lock, flags); - - return 0; -} - -void __init plat_timer_setup(struct irqaction *irq) -{ - setup_irq(8, irq); -} - -/* - * Ugly but the least of all evils. TLB initialization did flush the TLB so - * We need to setup mappings again before we can touch the RTC. - */ -void momenco_time_init(void) -{ - wire_stupidity_into_tlb(); - - mips_hpt_frequency = cpu_clock / 2; - - rtc_mips_get_time = m48t37y_get_time; - rtc_mips_set_time = m48t37y_set_time; -} - -static struct resource mv_pci_io_mem0_resource = { - .name = "MV64340 PCI0 IO MEM", - .flags = IORESOURCE_IO -}; - -static struct resource mv_pci_mem0_resource = { - .name = "MV64340 PCI0 MEM", - .flags = IORESOURCE_MEM -}; - -static struct mv_pci_controller mv_bus0_controller = { - .pcic = { - .pci_ops = &mv_pci_ops, - .mem_resource = &mv_pci_mem0_resource, - .io_resource = &mv_pci_io_mem0_resource, - }, - .config_addr = MV64340_PCI_0_CONFIG_ADDR, - .config_vreg = MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG, -}; - -static uint32_t mv_io_base, mv_io_size; - -static void ja_pci0_init(void) -{ - uint32_t mem0_base, mem0_size; - uint32_t io_base, io_size; - - io_base = MV_READ(MV64340_PCI_0_IO_BASE_ADDR) << 16; - io_size = (MV_READ(MV64340_PCI_0_IO_SIZE) + 1) << 16; - mem0_base = MV_READ(MV64340_PCI_0_MEMORY0_BASE_ADDR) << 16; - mem0_size = (MV_READ(MV64340_PCI_0_MEMORY0_SIZE) + 1) << 16; - - mv_pci_io_mem0_resource.start = 0; - mv_pci_io_mem0_resource.end = io_size - 1; - mv_pci_mem0_resource.start = mem0_base; - mv_pci_mem0_resource.end = mem0_base + mem0_size - 1; - mv_bus0_controller.pcic.mem_offset = mem0_base; - mv_bus0_controller.pcic.io_offset = 0; - - ioport_resource.end = io_size - 1; - - register_pci_controller(&mv_bus0_controller.pcic); - - mv_io_base = io_base; - mv_io_size = io_size; -} - -static struct resource mv_pci_io_mem1_resource = { - .name = "MV64340 PCI1 IO MEM", - .flags = IORESOURCE_IO -}; - -static struct resource mv_pci_mem1_resource = { - .name = "MV64340 PCI1 MEM", - .flags = IORESOURCE_MEM -}; - -static struct mv_pci_controller mv_bus1_controller = { - .pcic = { - .pci_ops = &mv_pci_ops, - .mem_resource = &mv_pci_mem1_resource, - .io_resource = &mv_pci_io_mem1_resource, - }, - .config_addr = MV64340_PCI_1_CONFIG_ADDR, - .config_vreg = MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG, -}; - -static __init void ja_pci1_init(void) -{ - uint32_t mem0_base, mem0_size; - uint32_t io_base, io_size; - - io_base = MV_READ(MV64340_PCI_1_IO_BASE_ADDR) << 16; - io_size = (MV_READ(MV64340_PCI_1_IO_SIZE) + 1) << 16; - mem0_base = MV_READ(MV64340_PCI_1_MEMORY0_BASE_ADDR) << 16; - mem0_size = (MV_READ(MV64340_PCI_1_MEMORY0_SIZE) + 1) << 16; - - /* - * Here we assume the I/O window of second bus to be contiguous with - * the first. A gap is no problem but would waste address space for - * remapping the port space. - */ - mv_pci_io_mem1_resource.start = mv_io_size; - mv_pci_io_mem1_resource.end = mv_io_size + io_size - 1; - mv_pci_mem1_resource.start = mem0_base; - mv_pci_mem1_resource.end = mem0_base + mem0_size - 1; - mv_bus1_controller.pcic.mem_offset = mem0_base; - mv_bus1_controller.pcic.io_offset = 0; - - ioport_resource.end = io_base + io_size -mv_io_base - 1; - - register_pci_controller(&mv_bus1_controller.pcic); - - mv_io_size = io_base + io_size - mv_io_base; -} - -static __init int __init ja_pci_init(void) -{ - unsigned long io_v_base; - uint32_t enable; - - enable = ~MV_READ(MV64340_BASE_ADDR_ENABLE); - - /* - * We require at least one enabled I/O or PCI memory window or we - * will ignore this PCI bus. We ignore PCI windows 1, 2 and 3. - */ - if (enable & (0x01 << 9) || enable & (0x01 << 10)) - ja_pci0_init(); - - if (enable & (0x01 << 14) || enable & (0x01 << 15)) - ja_pci1_init(); - - if (mv_io_size) { - io_v_base = (unsigned long) ioremap(mv_io_base, mv_io_size); - if (!io_v_base) - panic("Could not ioremap I/O port range"); - - set_io_port_base(io_v_base); - } - - return 0; -} - -arch_initcall(ja_pci_init); - -void __init plat_mem_setup(void) -{ - unsigned int tmpword; - - board_time_init = momenco_time_init; - - _machine_restart = momenco_jaguar_restart; - _machine_halt = momenco_jaguar_halt; - pm_power_off = momenco_jaguar_power_off; - - /* - * initrd_start = (unsigned long)jaguar_initrd_start; - * initrd_end = (unsigned long)jaguar_initrd_start + (ulong)jaguar_initrd_size; - * initrd_below_start_ok = 1; - */ - - wire_stupidity_into_tlb(); - - /* - * shut down ethernet ports, just to be sure our memory doesn't get - * corrupted by random ethernet traffic. - */ - MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8); - MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8); - MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(2), 0xff << 8); - MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8); - MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8); - MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(2), 0xff << 8); - while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff); - while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff); - while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(2)) & 0xff); - while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff); - while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff); - while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(2)) & 0xff); - MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0), - MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1); - MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1), - MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1); - MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(2), - MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(2)) & ~1); - - /* Turn off the Bit-Error LED */ - JAGUAR_FPGA_WRITE(0x80, CLR); - - tmpword = JAGUAR_FPGA_READ(BOARDREV); - if (tmpword < 26) - printk("Momentum Jaguar-ATX: Board Assembly Rev. %c\n", - 'A'+tmpword); - else - printk("Momentum Jaguar-ATX: Board Assembly Revision #0x%x\n", - tmpword); - - tmpword = JAGUAR_FPGA_READ(FPGA_REV); - printk("FPGA Rev: %d.%d\n", tmpword>>4, tmpword&15); - tmpword = JAGUAR_FPGA_READ(RESET_STATUS); - printk("Reset reason: 0x%x\n", tmpword); - switch (tmpword) { - case 0x1: - printk(" - Power-up reset\n"); - break; - case 0x2: - printk(" - Push-button reset\n"); - break; - case 0x8: - printk(" - Watchdog reset\n"); - break; - case 0x10: - printk(" - JTAG reset\n"); - break; - default: - printk(" - Unknown reset cause\n"); - } - reset_reason = tmpword; - JAGUAR_FPGA_WRITE(0xff, RESET_STATUS); - - tmpword = JAGUAR_FPGA_READ(BOARD_STATUS); - printk("Board Status register: 0x%02x\n", tmpword); - printk(" - User jumper: %s\n", (tmpword & 0x80)?"installed":"absent"); - printk(" - Boot flash write jumper: %s\n", (tmpword&0x40)?"installed":"absent"); - - /* 256MiB of RM9000x2 DDR */ -// add_memory_region(0x0, 0x100<<20, BOOT_MEM_RAM); - - /* 128MiB of MV-64340 DDR */ -// add_memory_region(0x100<<20, 0x80<<20, BOOT_MEM_RAM); - - /* XXX Memory configuration should be picked up from PMON2k */ -#ifdef CONFIG_JAGUAR_DMALOW - printk("Jaguar ATX DMA-low mode set\n"); - add_memory_region(0x00000000, 0x08000000, BOOT_MEM_RAM); - add_memory_region(0x08000000, 0x10000000, BOOT_MEM_RAM); -#else - /* 128MiB of MV-64340 DDR RAM */ - printk("Jaguar ATX DMA-low mode is not set\n"); - add_memory_region(0x100<<20, 0x80<<20, BOOT_MEM_RAM); -#endif - -#ifdef GEMDEBUG_TRACEBUFFER - { - unsigned int tbControl; - tbControl = - 0 << 26 | /* post trigger delay 0 */ - 0x2 << 16 | /* sequential trace mode */ - // 0x0 << 16 | /* non-sequential trace mode */ - // 0xf << 4 | /* watchpoints disabled */ - 2 << 2 | /* armed */ - 2 ; /* interrupt disabled */ - printk ("setting tbControl = %08lx\n", tbControl); - write_32bit_cp0_set1_register($22, tbControl); - __asm__ __volatile__(".set noreorder\n\t" \ - "nop; nop; nop; nop; nop; nop;\n\t" \ - "nop; nop; nop; nop; nop; nop;\n\t" \ - ".set reorder\n\t"); - - } -#endif -} diff --git a/arch/mips/momentum/ocelot_g/Makefile b/arch/mips/momentum/ocelot_g/Makefile deleted file mode 100644 index c0a0030d949d..000000000000 --- a/arch/mips/momentum/ocelot_g/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for Momentum Computer's Ocelot-G board. -# - -obj-y += irq.o gt-irq.o prom.o reset.o setup.o -obj-$(CONFIG_KGDB) += dbg_io.o diff --git a/arch/mips/momentum/ocelot_g/dbg_io.c b/arch/mips/momentum/ocelot_g/dbg_io.c deleted file mode 100644 index 32d6fb4ee679..000000000000 --- a/arch/mips/momentum/ocelot_g/dbg_io.c +++ /dev/null @@ -1,121 +0,0 @@ - -#include <asm/serial.h> /* For the serial port location and base baud */ - -/* --- CONFIG --- */ - -typedef unsigned char uint8; -typedef unsigned int uint32; - -/* --- END OF CONFIG --- */ - -#define UART16550_BAUD_2400 2400 -#define UART16550_BAUD_4800 4800 -#define UART16550_BAUD_9600 9600 -#define UART16550_BAUD_19200 19200 -#define UART16550_BAUD_38400 38400 -#define UART16550_BAUD_57600 57600 -#define UART16550_BAUD_115200 115200 - -#define UART16550_PARITY_NONE 0 -#define UART16550_PARITY_ODD 0x08 -#define UART16550_PARITY_EVEN 0x18 -#define UART16550_PARITY_MARK 0x28 -#define UART16550_PARITY_SPACE 0x38 - -#define UART16550_DATA_5BIT 0x0 -#define UART16550_DATA_6BIT 0x1 -#define UART16550_DATA_7BIT 0x2 -#define UART16550_DATA_8BIT 0x3 - -#define UART16550_STOP_1BIT 0x0 -#define UART16550_STOP_2BIT 0x4 - -/* ----------------------------------------------------- */ - -/* === CONFIG === */ - -/* [jsun] we use the second serial port for kdb */ -#define BASE OCELOT_SERIAL1_BASE -#define MAX_BAUD OCELOT_BASE_BAUD - -/* === END OF CONFIG === */ - -#define REG_OFFSET 4 - -/* register offset */ -#define OFS_RCV_BUFFER 0 -#define OFS_TRANS_HOLD 0 -#define OFS_SEND_BUFFER 0 -#define OFS_INTR_ENABLE (1*REG_OFFSET) -#define OFS_INTR_ID (2*REG_OFFSET) -#define OFS_DATA_FORMAT (3*REG_OFFSET) -#define OFS_LINE_CONTROL (3*REG_OFFSET) -#define OFS_MODEM_CONTROL (4*REG_OFFSET) -#define OFS_RS232_OUTPUT (4*REG_OFFSET) -#define OFS_LINE_STATUS (5*REG_OFFSET) -#define OFS_MODEM_STATUS (6*REG_OFFSET) -#define OFS_RS232_INPUT (6*REG_OFFSET) -#define OFS_SCRATCH_PAD (7*REG_OFFSET) - -#define OFS_DIVISOR_LSB (0*REG_OFFSET) -#define OFS_DIVISOR_MSB (1*REG_OFFSET) - - -/* memory-mapped read/write of the port */ -#define UART16550_READ(y) (*((volatile uint8*)(BASE + y))) -#define UART16550_WRITE(y, z) ((*((volatile uint8*)(BASE + y))) = z) - -void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) -{ - /* disable interrupts */ - UART16550_WRITE(OFS_INTR_ENABLE, 0); - - /* set up baud rate */ - { - uint32 divisor; - - /* set DIAB bit */ - UART16550_WRITE(OFS_LINE_CONTROL, 0x80); - - /* set divisor */ - divisor = MAX_BAUD / baud; - UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff); - UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8); - - /* clear DIAB bit */ - UART16550_WRITE(OFS_LINE_CONTROL, 0x0); - } - - /* set data format */ - UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop); -} - -static int remoteDebugInitialized = 0; - -uint8 getDebugChar(void) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(UART16550_BAUD_38400, - UART16550_DATA_8BIT, - UART16550_PARITY_NONE, UART16550_STOP_1BIT); - } - - while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0); - return UART16550_READ(OFS_RCV_BUFFER); -} - - -int putDebugChar(uint8 byte) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(UART16550_BAUD_38400, - UART16550_DATA_8BIT, - UART16550_PARITY_NONE, UART16550_STOP_1BIT); - } - - while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0); - UART16550_WRITE(OFS_SEND_BUFFER, byte); - return 1; -} diff --git a/arch/mips/momentum/ocelot_g/gt-irq.c b/arch/mips/momentum/ocelot_g/gt-irq.c deleted file mode 100644 index e5576bd50fa9..000000000000 --- a/arch/mips/momentum/ocelot_g/gt-irq.c +++ /dev/null @@ -1,212 +0,0 @@ -/* - * - * Copyright 2002 Momentum Computer - * Author: mdharm@momenco.com - * - * arch/mips/momentum/ocelot_g/gt_irq.c - * Interrupt routines for gt64240. Currently it only handles timer irq. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/kernel_stat.h> -#include <asm/gt64240.h> -#include <asm/io.h> - -unsigned long bus_clock; - -/* - * These are interrupt handlers for the GT on-chip interrupts. They - * all come in to the MIPS on a single interrupt line, and have to - * be handled and ack'ed differently than other MIPS interrupts. - */ - -#if 0 - -struct tq_struct irq_handlers[MAX_CAUSE_REGS][MAX_CAUSE_REG_WIDTH]; -void hook_irq_handler(int int_cause, int bit_num, void *isr_ptr); - -/* - * Hooks IRQ handler to the system. When the system is interrupted - * the interrupt service routine is called. - * - * Inputs : - * int_cause - The interrupt cause number. In EVB64120 two parameters - * are declared, INT_CAUSE_MAIN and INT_CAUSE_HIGH. - * bit_num - Indicates which bit number in the cause register - * isr_ptr - Pointer to the interrupt service routine - */ -void hook_irq_handler(int int_cause, int bit_num, void *isr_ptr) -{ - irq_handlers[int_cause][bit_num].routine = isr_ptr; -} - - -/* - * Enables the IRQ on Galileo Chip - * - * Inputs : - * int_cause - The interrupt cause number. In EVB64120 two parameters - * are declared, INT_CAUSE_MAIN and INT_CAUSE_HIGH. - * bit_num - Indicates which bit number in the cause register - * - * Outputs : - * 1 if successful, 0 if failure - */ -int enable_galileo_irq(int int_cause, int bit_num) -{ - if (int_cause == INT_CAUSE_MAIN) - SET_REG_BITS(CPU_INTERRUPT_MASK_REGISTER, (1 << bit_num)); - else if (int_cause == INT_CAUSE_HIGH) - SET_REG_BITS(CPU_HIGH_INTERRUPT_MASK_REGISTER, - (1 << bit_num)); - else - return 0; - - return 1; -} - -/* - * Disables the IRQ on Galileo Chip - * - * Inputs : - * int_cause - The interrupt cause number. In EVB64120 two parameters - * are declared, INT_CAUSE_MAIN and INT_CAUSE_HIGH. - * bit_num - Indicates which bit number in the cause register - * - * Outputs : - * 1 if successful, 0 if failure - */ -int disable_galileo_irq(int int_cause, int bit_num) -{ - if (int_cause == INT_CAUSE_MAIN) - RESET_REG_BITS(CPU_INTERRUPT_MASK_REGISTER, - (1 << bit_num)); - else if (int_cause == INT_CAUSE_HIGH) - RESET_REG_BITS(CPU_HIGH_INTERRUPT_MASK_REGISTER, - (1 << bit_num)); - else - return 0; - return 1; -} -#endif /* 0 */ - -/* - * Interrupt handler for interrupts coming from the Galileo chip via P0_INT#. - * - * We route the timer interrupt to P0_INT# (IRQ 6), and that's all this - * routine can handle, for now. - * - * In the future, we'll route more interrupts to this pin, and that's why - * we keep this particular structure in the function. - */ - -static irqreturn_t gt64240_p0int_irq(int irq, void *dev) -{ - uint32_t irq_src, irq_src_mask; - int handled; - - /* get the low interrupt cause register */ - irq_src = MV_READ(LOW_INTERRUPT_CAUSE_REGISTER); - - /* get the mask register for this pin */ - irq_src_mask = MV_READ(PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW); - - /* mask off only the interrupts we're interested in */ - irq_src = irq_src & irq_src_mask; - - handled = IRQ_NONE; - - /* Check for timer interrupt */ - if (irq_src & 0x00000100) { - handled = IRQ_HANDLED; - irq_src &= ~0x00000100; - - /* Clear any pending cause bits */ - MV_WRITE(TIMER_COUNTER_0_3_INTERRUPT_CAUSE, 0x0); - - /* handle the timer call */ - do_timer(1); -#ifndef CONFIG_SMP - update_process_times(user_mode(get_irq_regs())); -#endif - } - - if (irq_src) { - printk(KERN_INFO - "UNKNOWN P0_INT# interrupt received, irq_src=0x%x\n", - irq_src); - } - - return handled; -} - -/* - * Initializes timer using galileo's built in timer. - */ - -/* - * This will ignore the standard MIPS timer interrupt handler - * that is passed in as *irq (=irq0 in ../kernel/time.c). - * We will do our own timer interrupt handling. - */ -void gt64240_time_init(void) -{ - static struct irqaction timer; - - /* Stop the timer -- we'll use timer #0 */ - MV_WRITE(TIMER_COUNTER_0_3_CONTROL, 0x0); - - /* Load timer value for 100 Hz */ - MV_WRITE(TIMER_COUNTER0, bus_clock / 100); - - /* - * Create the IRQ structure entry for the timer. Since we're too early - * in the boot process to use the "request_irq()" call, we'll hard-code - * the values to the correct interrupt line. - */ - timer.handler = >64240_p0int_irq; - timer.flags = IRQF_SHARED | IRQF_DISABLED; - timer.name = "timer"; - timer.dev_id = NULL; - timer.next = NULL; - timer.mask = CPU_MASK_NONE; - irq_desc[6].action = &timer; - - enable_irq(6); - - /* Clear any pending cause bits */ - MV_WRITE(TIMER_COUNTER_0_3_INTERRUPT_CAUSE, 0x0); - - /* Enable the interrupt for timer 0 */ - MV_WRITE(TIMER_COUNTER_0_3_INTERRUPT_MASK, 0x1); - - /* Enable the timer interrupt for GT-64240 pin P0_INT# */ - MV_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0x100); - - /* Configure and start the timer */ - MV_WRITE(TIMER_COUNTER_0_3_CONTROL, 0x3); -} - -void gt64240_irq_init(void) -{ -#if 0 - int i, j; - - /* Reset irq handlers pointers to NULL */ - for (i = 0; i < MAX_CAUSE_REGS; i++) { - for (j = 0; j < MAX_CAUSE_REG_WIDTH; j++) { - irq_handlers[i][j].next = NULL; - irq_handlers[i][j].sync = 0; - irq_handlers[i][j].routine = NULL; - irq_handlers[i][j].data = NULL; - } - } -#endif /* 0 */ -} diff --git a/arch/mips/momentum/ocelot_g/irq.c b/arch/mips/momentum/ocelot_g/irq.c deleted file mode 100644 index 273541fe7087..000000000000 --- a/arch/mips/momentum/ocelot_g/irq.c +++ /dev/null @@ -1,101 +0,0 @@ -/* - * Copyright (C) 2000 RidgeRun, Inc. - * Author: RidgeRun, Inc. - * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com - * - * Copyright 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * Copyright (C) 2000, 01, 05 Ralf Baechle (ralf@linux-mips.org) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/kernel_stat.h> -#include <linux/module.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/timex.h> -#include <linux/slab.h> -#include <linux/random.h> -#include <linux/bitops.h> -#include <asm/bootinfo.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/irq_cpu.h> -#include <asm/mipsregs.h> -#include <asm/system.h> - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_cause() & read_c0_status(); - - if (pending & STATUSF_IP2) - do_IRQ(2); - else if (pending & STATUSF_IP3) - do_IRQ(3); - else if (pending & STATUSF_IP4) - do_IRQ(4); - else if (pending & STATUSF_IP5) - do_IRQ(5); - else if (pending & STATUSF_IP6) - do_IRQ(6); - else if (pending & STATUSF_IP7) - do_IRQ(7); - else { - /* - * Now look at the extended interrupts - */ - pending = (read_c0_cause() & (read_c0_intcontrol() << 8)) >> 16; - - if (pending & STATUSF_IP8) - do_IRQ(8); - else if (pending & STATUSF_IP9) - do_IRQ(9); - else if (pending & STATUSF_IP10) - do_IRQ(10); - else if (pending & STATUSF_IP11) - do_IRQ(11); - else - spurious_interrupt(); - } -} - -extern void gt64240_irq_init(void); - -void __init arch_init_irq(void) -{ - /* - * Clear all of the interrupts while we change the able around a bit. - * int-handler is not on bootstrap - */ - clear_c0_status(ST0_IM); - local_irq_disable(); - - mips_cpu_irq_init(); - rm7k_cpu_irq_init(); - - gt64240_irq_init(); -} diff --git a/arch/mips/momentum/ocelot_g/ocelot_pld.h b/arch/mips/momentum/ocelot_g/ocelot_pld.h deleted file mode 100644 index 95e0534026d0..000000000000 --- a/arch/mips/momentum/ocelot_g/ocelot_pld.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Ocelot Board Register Definitions - * - * (C) 2001 Red Hat, Inc. - * - * GPL'd - */ -#ifndef __MOMENCO_OCELOT_PLD_H__ -#define __MOMENCO_OCELOT_PLD_H__ - -#define OCELOT_CS0_ADDR (0xfc000000) - -#define OCELOT_REG_BOARDREV (0) -#define OCELOT_REG_PLD1_ID (1) -#define OCELOT_REG_PLD2_ID (2) -#define OCELOT_REG_RESET_STATUS (3) -#define OCELOT_REG_BOARD_STATUS (4) -#define OCELOT_REG_CPCI_ID (5) -#define OCELOT_REG_I2C_CTRL (8) -#define OCELOT_REG_EEPROM_MODE (9) -#define OCELOT_REG_INTMASK (10) -#define OCELOT_REG_INTSTATUS (11) -#define OCELOT_REG_INTSET (12) -#define OCELOT_REG_INTCLR (13) - -#define __PLD_REG_TO_ADDR(reg) ((void *) OCELOT_CS0_ADDR + OCELOT_REG_##reg) -#define OCELOT_PLD_WRITE(x, reg) writeb(x, __PLD_REG_TO_ADDR(reg)) -#define OCELOT_PLD_READ(reg) readb(__PLD_REG_TO_ADDR(reg)) - -#endif /* __MOMENCO_OCELOT_PLD_H__ */ diff --git a/arch/mips/momentum/ocelot_g/prom.c b/arch/mips/momentum/ocelot_g/prom.c deleted file mode 100644 index 836d0830720d..000000000000 --- a/arch/mips/momentum/ocelot_g/prom.c +++ /dev/null @@ -1,84 +0,0 @@ -/* - * Copyright 2002 Momentum Computer Inc. - * Author: Matthew Dharm <mdharm@momenco.com> - * - * Based on Ocelot Linux port, which is - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/bootmem.h> - -#include <asm/addrspace.h> -#include <asm/bootinfo.h> -#include <asm/pmon.h> -#include <asm/gt64240.h> - -#include "ocelot_pld.h" - -struct callvectors* debug_vectors; - -extern unsigned long marvell_base; -extern unsigned long bus_clock; - -#ifdef CONFIG_GALILEO_GT64240_ETH -extern unsigned char prom_mac_addr_base[6]; -#endif - -const char *get_system_type(void) -{ - return "Momentum Ocelot"; -} - -void __init prom_init(void) -{ - int argc = fw_arg0; - char **arg = (char **) fw_arg1; - char **env = (char **) fw_arg2; - struct callvectors *cv = (struct callvectors *) fw_arg3; - int i; - - /* save the PROM vectors for debugging use */ - debug_vectors = cv; - - /* arg[0] is "g", the rest is boot parameters */ - arcs_cmdline[0] = '\0'; - for (i = 1; i < argc; i++) { - if (strlen(arcs_cmdline) + strlen(arg[i] + 1) - >= sizeof(arcs_cmdline)) - break; - strcat(arcs_cmdline, arg[i]); - strcat(arcs_cmdline, " "); - } - - mips_machgroup = MACH_GROUP_MOMENCO; - mips_machtype = MACH_MOMENCO_OCELOT_G; - -#ifdef CONFIG_GALILEO_GT64240_ETH - /* get the base MAC address for on-board ethernet ports */ - memcpy(prom_mac_addr_base, (void*)0xfc807cf2, 6); -#endif - - while (*env) { - if (strncmp("gtbase", *env, strlen("gtbase")) == 0) { - marvell_base = simple_strtol(*env + strlen("gtbase="), - NULL, 16); - } - if (strncmp("busclock", *env, strlen("busclock")) == 0) { - bus_clock = simple_strtol(*env + strlen("busclock="), - NULL, 10); - } - env++; - } -} - -void __init prom_free_prom_memory(void) -{ -} diff --git a/arch/mips/momentum/ocelot_g/reset.c b/arch/mips/momentum/ocelot_g/reset.c deleted file mode 100644 index 3fd499adf4cf..000000000000 --- a/arch/mips/momentum/ocelot_g/reset.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Copyright (C) 1997, 2001 Ralf Baechle - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - */ -#include <linux/sched.h> -#include <linux/mm.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/processor.h> -#include <asm/reboot.h> -#include <asm/system.h> -#include <linux/delay.h> - -void momenco_ocelot_restart(char *command) -{ - void *nvram = ioremap_nocache(0x2c807000, 0x1000); - - if (!nvram) { - printk(KERN_NOTICE "ioremap of reset register failed\n"); - return; - } - writeb(0x84, nvram + 0xff7); /* Ask the NVRAM/RTC/watchdog chip to - assert reset in 1/16 second */ - mdelay(10+(1000/16)); - iounmap(nvram); - printk(KERN_NOTICE "Watchdog reset failed\n"); -} - -void momenco_ocelot_halt(void) -{ - printk(KERN_NOTICE "\n** You can safely turn off the power\n"); - while (1) - __asm__(".set\tmips3\n\t" - "wait\n\t" - ".set\tmips0"); -} - -void momenco_ocelot_power_off(void) -{ - momenco_ocelot_halt(); -} diff --git a/arch/mips/momentum/ocelot_g/setup.c b/arch/mips/momentum/ocelot_g/setup.c deleted file mode 100644 index 9db638a7982c..000000000000 --- a/arch/mips/momentum/ocelot_g/setup.c +++ /dev/null @@ -1,267 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Momentum Computer Ocelot-G (CP7000G) - board dependent boot routines - * - * Copyright (C) 1996, 1997, 2001 Ralf Baechle - * Copyright (C) 2000 RidgeRun, Inc. - * Copyright (C) 2001 Red Hat, Inc. - * Copyright (C) 2002 Momentum Computer - * - * Author: Matthew Dharm, Momentum Computer - * mdharm@momenco.com - * - * Author: RidgeRun, Inc. - * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com - * - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/mm.h> -#include <linux/swap.h> -#include <linux/ioport.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/pci.h> -#include <linux/pm.h> -#include <linux/timex.h> -#include <linux/vmalloc.h> - -#include <asm/time.h> -#include <asm/bootinfo.h> -#include <asm/page.h> -#include <asm/io.h> -#include <asm/gt64240.h> -#include <asm/irq.h> -#include <asm/pci.h> -#include <asm/pgtable.h> -#include <asm/processor.h> -#include <asm/reboot.h> -#include <linux/bootmem.h> - -#include "ocelot_pld.h" - -#ifdef CONFIG_GALILEO_GT64240_ETH -extern unsigned char prom_mac_addr_base[6]; -#endif - -unsigned long marvell_base; - -/* These functions are used for rebooting or halting the machine*/ -extern void momenco_ocelot_restart(char *command); -extern void momenco_ocelot_halt(void); -extern void momenco_ocelot_power_off(void); - -extern void gt64240_time_init(void); -extern void momenco_ocelot_irq_setup(void); - -static char reset_reason; - -static unsigned long ENTRYLO(unsigned long paddr) -{ - return ((paddr & PAGE_MASK) | - (_PAGE_PRESENT | __READABLE | __WRITEABLE | _PAGE_GLOBAL | - _CACHE_UNCACHED)) >> 6; -} - -/* setup code for a handoff from a version 2 PMON 2000 PROM */ -void PMON_v2_setup(void) -{ - /* A wired TLB entry for the GT64240 and the serial port. The - GT64240 is going to be hit on every IRQ anyway - there's - absolutely no point in letting it be a random TLB entry, as - it'll just cause needless churning of the TLB. And we use - the other half for the serial port, which is just a PITA - otherwise :) - - Device Physical Virtual - GT64240 Internal Regs 0xf4000000 0xe0000000 - UARTs (CS2) 0xfd000000 0xe0001000 - */ - add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000), - 0xf4000000, PM_64K); - add_wired_entry(ENTRYLO(0xfd000000), ENTRYLO(0xfd001000), - 0xfd000000, PM_4K); - - /* Also a temporary entry to let us talk to the Ocelot PLD and NVRAM - in the CS[012] region. We can't use ioremap() yet. The NVRAM - is a ST M48T37Y, which includes NVRAM, RTC, and Watchdog functions. - - Ocelot PLD (CS0) 0xfc000000 0xe0020000 - NVRAM (CS1) 0xfc800000 0xe0030000 - */ - add_temporary_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfc010000), - 0xfc000000, PM_64K); - add_temporary_entry(ENTRYLO(0xfc800000), ENTRYLO(0xfc810000), - 0xfc800000, PM_64K); - - marvell_base = 0xf4000000; -} - -extern int rm7k_tcache_enabled; - -/* - * This runs in KSEG1. See the verbiage in rm7k.c::probe_scache() - */ -#define Page_Invalidate_T 0x16 -static void __init setup_l3cache(unsigned long size) -{ - int register i; - - printk("Enabling L3 cache..."); - - /* Enable the L3 cache in the GT64120A's CPU Configuration register */ - MV_WRITE(0, MV_READ(0) | (1<<14)); - - /* Enable the L3 cache in the CPU */ - set_c0_config(1<<12 /* CONF_TE */); - - /* Clear the cache */ - write_c0_taglo(0); - write_c0_taghi(0); - - for (i=0; i < size; i+= 4096) { - __asm__ __volatile__ ( - ".set noreorder\n\t" - ".set mips3\n\t" - "cache %1, (%0)\n\t" - ".set mips0\n\t" - ".set reorder" - : - : "r" (KSEG0ADDR(i)), - "i" (Page_Invalidate_T)); - } - - /* Let the RM7000 MM code know that the tertiary cache is enabled */ - rm7k_tcache_enabled = 1; - - printk("Done\n"); -} - -void __init plat_timer_setup(struct irqaction *irq) -{ -} - -void __init plat_mem_setup(void) -{ - void (*l3func)(unsigned long) = (void *) KSEG1ADDR(setup_l3cache); - unsigned int tmpword; - - board_time_init = gt64240_time_init; - - _machine_restart = momenco_ocelot_restart; - _machine_halt = momenco_ocelot_halt; - pm_power_off = momenco_ocelot_power_off; - - /* - * initrd_start = (unsigned long)ocelot_initrd_start; - * initrd_end = (unsigned long)ocelot_initrd_start + (ulong)ocelot_initrd_size; - * initrd_below_start_ok = 1; - */ - - /* do handoff reconfiguration */ - PMON_v2_setup(); - -#ifdef CONFIG_GALILEO_GT64240_ETH - /* get the mac addr */ - memcpy(prom_mac_addr_base, (void*)0xfc807cf2, 6); -#endif - - /* Turn off the Bit-Error LED */ - OCELOT_PLD_WRITE(0x80, INTCLR); - - tmpword = OCELOT_PLD_READ(BOARDREV); - if (tmpword < 26) - printk("Momenco Ocelot-G: Board Assembly Rev. %c\n", 'A'+tmpword); - else - printk("Momenco Ocelot-G: Board Assembly Revision #0x%x\n", tmpword); - - tmpword = OCELOT_PLD_READ(PLD1_ID); - printk("PLD 1 ID: %d.%d\n", tmpword>>4, tmpword&15); - tmpword = OCELOT_PLD_READ(PLD2_ID); - printk("PLD 2 ID: %d.%d\n", tmpword>>4, tmpword&15); - tmpword = OCELOT_PLD_READ(RESET_STATUS); - printk("Reset reason: 0x%x\n", tmpword); - reset_reason = tmpword; - OCELOT_PLD_WRITE(0xff, RESET_STATUS); - - tmpword = OCELOT_PLD_READ(BOARD_STATUS); - printk("Board Status register: 0x%02x\n", tmpword); - printk(" - User jumper: %s\n", (tmpword & 0x80)?"installed":"absent"); - printk(" - Boot flash write jumper: %s\n", (tmpword&0x40)?"installed":"absent"); - printk(" - Tulip PHY %s connected\n", (tmpword&0x10)?"is":"not"); - printk(" - L3 Cache size: %d MiB\n", (1<<((tmpword&12) >> 2))&~1); - printk(" - SDRAM size: %d MiB\n", 1<<(6+(tmpword&3))); - - if (tmpword&12) - l3func((1<<(((tmpword&12) >> 2)+20))); - - switch(tmpword &3) { - case 3: - /* 512MiB -- two banks of 256MiB */ - add_memory_region( 0x0<<20, 0x100<<20, BOOT_MEM_RAM); -/* - add_memory_region(0x100<<20, 0x100<<20, BOOT_MEM_RAM); -*/ - break; - case 2: - /* 256MiB -- two banks of 128MiB */ - add_memory_region( 0x0<<20, 0x80<<20, BOOT_MEM_RAM); - add_memory_region(0x80<<20, 0x80<<20, BOOT_MEM_RAM); - break; - case 1: - /* 128MiB -- 64MiB per bank */ - add_memory_region( 0x0<<20, 0x40<<20, BOOT_MEM_RAM); - add_memory_region(0x40<<20, 0x40<<20, BOOT_MEM_RAM); - break; - case 0: - /* 64MiB */ - add_memory_region( 0x0<<20, 0x40<<20, BOOT_MEM_RAM); - break; - } - - /* FIXME: Fix up the DiskOnChip mapping */ - MV_WRITE(0x468, 0xfef73); -} - -/* This needs to be one of the first initcalls, because no I/O port access - can work before this */ - -static int io_base_ioremap(void) -{ - /* we're mapping PCI accesses from 0xc0000000 to 0xf0000000 */ - unsigned long io_remap_range; - - io_remap_range = (unsigned long) ioremap(0xc0000000, 0x30000000); - if (!io_remap_range) - panic("Could not ioremap I/O port range"); - - set_io_port_base(io_remap_range - 0xc0000000); - - return 0; -} - -module_init(io_base_ioremap); diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index df487c063b1d..aba3dbf47eda 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -30,11 +30,9 @@ obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o -obj-$(CONFIG_MOMENCO_JAGUAR_ATX)+= fixup-jaguar.o obj-$(CONFIG_MOMENCO_OCELOT) += fixup-ocelot.o pci-ocelot.o obj-$(CONFIG_MOMENCO_OCELOT_3) += fixup-ocelot3.o obj-$(CONFIG_MOMENCO_OCELOT_C) += fixup-ocelot-c.o pci-ocelot-c.o -obj-$(CONFIG_MOMENCO_OCELOT_G) += fixup-ocelot-g.o pci-ocelot-g.o obj-$(CONFIG_PMC_YOSEMITE) += fixup-yosemite.o ops-titan.o ops-titan-ht.o \ pci-yosemite.o obj-$(CONFIG_SGI_IP27) += ops-bridge.o pci-ip27.o diff --git a/arch/mips/pci/fixup-cobalt.c b/arch/mips/pci/fixup-cobalt.c index 7d5f6bbf7a9d..d57ffd7242ca 100644 --- a/arch/mips/pci/fixup-cobalt.c +++ b/arch/mips/pci/fixup-cobalt.c @@ -17,9 +17,7 @@ #include <asm/io.h> #include <asm/gt64120.h> -#include <asm/mach-cobalt/cobalt.h> - -extern int cobalt_board_id; +#include <cobalt.h> static void qube_raq_galileo_early_fixup(struct pci_dev *dev) { @@ -115,6 +113,27 @@ static void qube_raq_galileo_fixup(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111, qube_raq_galileo_fixup); +int cobalt_board_id; + +static void qube_raq_via_board_id_fixup(struct pci_dev *dev) +{ + u8 id; + int retval; + + retval = pci_read_config_byte(dev, VIA_COBALT_BRD_ID_REG, &id); + if (retval) { + panic("Cannot read board ID"); + return; + } + + cobalt_board_id = VIA_COBALT_BRD_REG_to_ID(id); + + printk(KERN_INFO "Cobalt board ID: %d\n", cobalt_board_id); +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, + qube_raq_via_board_id_fixup); + static char irq_tab_qube1[] __initdata = { [COBALT_PCICONF_CPU] = 0, [COBALT_PCICONF_ETH0] = COBALT_QUBE1_ETH0_IRQ, diff --git a/arch/mips/pci/fixup-jaguar.c b/arch/mips/pci/fixup-jaguar.c deleted file mode 100644 index 6c5e1d47179c..000000000000 --- a/arch/mips/pci/fixup-jaguar.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Marvell MV64340 interrupt fixup code. - * - * Marvell wants an NDA for their docs so this was written without - * documentation. You've been warned. - * - * Copyright (C) 2004 Ralf Baechle (ralf@linux-mips.org) - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/pci.h> - -#include <asm/mipsregs.h> - -/* - * WARNING: Example of how _NOT_ to do it. - */ -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - int bus = dev->bus->number; - - if (bus == 0 && slot == 1) - return 3; /* PCI-X A */ - if (bus == 0 && slot == 2) - return 4; /* PCI-X B */ - if (bus == 1 && slot == 1) - return 5; /* PCI A */ - if (bus == 1 && slot == 2) - return 6; /* PCI B */ - -return 0; - panic("Whooops in pcibios_map_irq"); -} - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} diff --git a/arch/mips/pci/fixup-ocelot-g.c b/arch/mips/pci/fixup-ocelot-g.c deleted file mode 100644 index d7a652e326c5..000000000000 --- a/arch/mips/pci/fixup-ocelot-g.c +++ /dev/null @@ -1,37 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Copyright (C) 2004 Ralf Baechle (ralf@linux-mips.org) - */ -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/init.h> - -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - int bus = dev->bus->number; - - if (bus == 0 && slot == 1) /* Intel 82543 Gigabit MAC */ - return 2; /* irq_nr is 2 for INT0 */ - - if (bus == 0 && slot == 2) /* Intel 82543 Gigabit MAC */ - return 3; /* irq_nr is 3 for INT1 */ - - if (bus == 1 && slot == 3) /* Intel 21555 bridge */ - return 5; /* irq_nr is 8 for INT6 */ - - if (bus == 1 && slot == 4) /* PMC Slot */ - return 9; /* irq_nr is 9 for INT7 */ - - return -1; -} - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} diff --git a/arch/mips/pci/pci-ocelot-g.c b/arch/mips/pci/pci-ocelot-g.c deleted file mode 100644 index 1e3430154fa0..000000000000 --- a/arch/mips/pci/pci-ocelot-g.c +++ /dev/null @@ -1,97 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) - * - * This doesn't really fly - but I don't have a GT64240 system for testing. - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <asm/gt64240.h> - -/* - * We assume these address ranges have been programmed into the GT-64240 by - * the firmware. PMON in case of the Ocelot G does that. Note the size of - * the I/O range is completly stupid; I/O mappings are limited to at most - * 256 bytes by the PCI spec and deprecated; and just to make things worse - * apparently many devices don't decode more than 64k of I/O space. - */ - -#define gt_io_size 0x20000000UL -#define gt_io_base 0xe0000000UL - -static struct resource gt_pci_mem0_resource = { - .name = "MV64240 PCI0 MEM", - .start = 0xc0000000UL, - .end = 0xcfffffffUL, - .flags = IORESOURCE_MEM -}; - -static struct resource gt_pci_io_mem0_resource = { - .name = "MV64240 PCI0 IO MEM", - .start = 0xe0000000UL, - .end = 0xefffffffUL, - .flags = IORESOURCE_IO -}; - -static struct mv_pci_controller gt_bus0_controller = { - .pcic = { - .pci_ops = &mv_pci_ops, - .mem_resource = >_pci_mem0_resource, - .mem_offset = 0xc0000000UL, - .io_resource = >_pci_io_mem0_resource, - .io_offset = 0x00000000UL - }, - .config_addr = PCI_0CONFIGURATION_ADDRESS, - .config_vreg = PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER, -}; - -static struct resource gt_pci_mem1_resource = { - .name = "MV64240 PCI1 MEM", - .start = 0xd0000000UL, - .end = 0xdfffffffUL, - .flags = IORESOURCE_MEM -}; - -static struct resource gt_pci_io_mem1_resource = { - .name = "MV64240 PCI1 IO MEM", - .start = 0xf0000000UL, - .end = 0xffffffffUL, - .flags = IORESOURCE_IO -}; - -static struct mv_pci_controller gt_bus1_controller = { - .pcic = { - .pci_ops = &mv_pci_ops, - .mem_resource = >_pci_mem1_resource, - .mem_offset = 0xd0000000UL, - .io_resource = >_pci_io_mem1_resource, - .io_offset = 0x10000000UL - }, - .config_addr = PCI_1CONFIGURATION_ADDRESS, - .config_vreg = PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER, -}; - -static __init int __init ocelot_g_pci_init(void) -{ - unsigned long io_v_base; - - if (gt_io_size) { - io_v_base = (unsigned long) ioremap(gt_io_base, gt_io_size); - if (!io_v_base) - panic("Could not ioremap I/O port range"); - - set_io_port_base(io_v_base); - } - - register_pci_controller(>_bus0_controller.pcic); - register_pci_controller(>_bus1_controller.pcic); - - return 0; -} - -arch_initcall(ocelot_g_pci_init); diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index ad445d5e58c7..95ce8f49e382 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -246,7 +246,7 @@ comment "Platform RTC drivers" config RTC_DRV_CMOS tristate "PC-style 'CMOS'" depends on RTC_CLASS && (X86 || ALPHA || ARM26 || ARM \ - || M32R || ATARI || POWERPC) + || M32R || ATARI || POWERPC || MIPS) help Say "yes" here to get direct support for the real time clock found in every PC or ACPI-based system, and some other boards. diff --git a/include/asm-mips/atomic.h b/include/asm-mips/atomic.h index 62daa746a9c9..1b60624dab7e 100644 --- a/include/asm-mips/atomic.h +++ b/include/asm-mips/atomic.h @@ -689,7 +689,7 @@ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v) } #define atomic64_cmpxchg(v, o, n) \ - (((__typeof__((v)->counter)))cmpxchg(&((v)->counter), (o), (n))) + ((__typeof__((v)->counter))cmpxchg(&((v)->counter), (o), (n))) #define atomic64_xchg(v, new) (xchg(&((v)->counter), (new))) /** diff --git a/include/asm-mips/bootinfo.h b/include/asm-mips/bootinfo.h index dbf834f4dac4..b0c329783ac5 100644 --- a/include/asm-mips/bootinfo.h +++ b/include/asm-mips/bootinfo.h @@ -119,9 +119,9 @@ */ #define MACH_GROUP_MOMENCO 12 /* Momentum Boards */ #define MACH_MOMENCO_OCELOT 0 -#define MACH_MOMENCO_OCELOT_G 1 +#define MACH_MOMENCO_OCELOT_G 1 /* no more supported (may 2007) */ #define MACH_MOMENCO_OCELOT_C 2 -#define MACH_MOMENCO_JAGUAR_ATX 3 +#define MACH_MOMENCO_JAGUAR_ATX 3 /* no more supported (may 2007) */ #define MACH_MOMENCO_OCELOT_3 4 /* diff --git a/include/asm-mips/fpu.h b/include/asm-mips/fpu.h index b414a7d9db43..483685b1592e 100644 --- a/include/asm-mips/fpu.h +++ b/include/asm-mips/fpu.h @@ -16,6 +16,7 @@ #include <asm/mipsregs.h> #include <asm/cpu.h> #include <asm/cpu-features.h> +#include <asm/hazards.h> #include <asm/bitops.h> #include <asm/processor.h> #include <asm/current.h> @@ -38,34 +39,16 @@ extern void _init_fpu(void); extern void _save_fp(struct task_struct *); extern void _restore_fp(struct task_struct *); -#if defined(CONFIG_CPU_SB1) -#define __enable_fpu_hazard() \ -do { \ - asm(".set push \n\t" \ - ".set mips64 \n\t" \ - ".set noreorder \n\t" \ - "ssnop \n\t" \ - "bnezl $0, .+4 \n\t" \ - "ssnop \n\t" \ - ".set pop"); \ -} while (0) -#else -#define __enable_fpu_hazard() \ -do { \ - asm("nop;nop;nop;nop"); /* max. hazard */ \ -} while (0) -#endif - #define __enable_fpu() \ do { \ set_c0_status(ST0_CU1); \ - __enable_fpu_hazard(); \ + enable_fpu_hazard(); \ } while (0) #define __disable_fpu() \ do { \ clear_c0_status(ST0_CU1); \ - /* We don't care about the c0 hazard here */ \ + disable_fpu_hazard(); \ } while (0) #define enable_fpu() \ diff --git a/include/asm-mips/hazards.h b/include/asm-mips/hazards.h index e50c77e69cb5..d9119f43f9aa 100644 --- a/include/asm-mips/hazards.h +++ b/include/asm-mips/hazards.h @@ -178,4 +178,36 @@ ASMMACRO(back_to_back_c0_hazard, #endif + +/* FPU hazards */ + +#if defined(CONFIG_CPU_SB1) +ASMMACRO(enable_fpu_hazard, + .set push; + .set mips64; + .set noreorder; + _ssnop; + bnezl $0,.+4; + _ssnop; + .set pop +) +ASMMACRO(disable_fpu_hazard, +) + +#elif defined(CONFIG_CPU_MIPSR2) +ASMMACRO(enable_fpu_hazard, + _ehb +) +ASMMACRO(disable_fpu_hazard, + _ehb +) +#else +ASMMACRO(enable_fpu_hazard, + nop; nop; nop; nop +) +ASMMACRO(disable_fpu_hazard, + _ehb +) +#endif + #endif /* _ASM_HAZARDS_H */ diff --git a/include/asm-mips/highmem.h b/include/asm-mips/highmem.h index f8c8182f7f2e..4d6bd5c31c7b 100644 --- a/include/asm-mips/highmem.h +++ b/include/asm-mips/highmem.h @@ -48,46 +48,6 @@ extern pte_t *pkmap_page_table; extern void * kmap_high(struct page *page); extern void kunmap_high(struct page *page); -/* - * CONFIG_LIMITED_DMA is for systems with DMA limitations such as Momentum's - * Jaguar ATX. This option exploits the highmem code in the kernel so is - * always enabled together with CONFIG_HIGHMEM but at this time doesn't - * actually add highmem functionality. - */ - -#ifdef CONFIG_LIMITED_DMA - -/* - * These are the default functions for the no-highmem case from - * <linux/highmem.h> - */ -static inline void *kmap(struct page *page) -{ - might_sleep(); - return page_address(page); -} - -#define kunmap(page) do { (void) (page); } while (0) - -static inline void *kmap_atomic(struct page *page, enum km_type type) -{ - pagefault_disable(); - return page_address(page); -} - -static inline void kunmap_atomic(void *kvaddr, enum km_type type) -{ - pagefault_enable(); -} - -#define kmap_atomic_pfn(pfn, idx) kmap_atomic(pfn_to_page(pfn), (idx)) - -#define kmap_atomic_to_page(ptr) virt_to_page(ptr) - -#define flush_cache_kmaps() do { } while (0) - -#else /* LIMITED_DMA */ - extern void *__kmap(struct page *page); extern void __kunmap(struct page *page); extern void *__kmap_atomic(struct page *page, enum km_type type); @@ -103,8 +63,6 @@ extern struct page *__kmap_atomic_to_page(void *ptr); #define flush_cache_kmaps() flush_cache_all() -#endif /* LIMITED_DMA */ - #endif /* __KERNEL__ */ #endif /* _ASM_HIGHMEM_H */ diff --git a/include/asm-mips/mach-cobalt/cobalt.h b/include/asm-mips/mach-cobalt/cobalt.h index 24a8d51a55a3..684a501c04cf 100644 --- a/include/asm-mips/mach-cobalt/cobalt.h +++ b/include/asm-mips/mach-cobalt/cobalt.h @@ -69,6 +69,8 @@ #define COBALT_BRD_ID_QUBE2 0x5 #define COBALT_BRD_ID_RAQ2 0x6 +extern int cobalt_board_id; + #define PCI_CFG_SET(devfn,where) \ GT_WRITE(GT_PCI0_CFGADDR_OFS, (0x80000000 | (PCI_SLOT (devfn) << 11) | \ (PCI_FUNC (devfn) << 8) | (where))) diff --git a/include/asm-mips/mach-ja/cpu-feature-overrides.h b/include/asm-mips/mach-ja/cpu-feature-overrides.h deleted file mode 100644 index 84b6dead0e8a..000000000000 --- a/include/asm-mips/mach-ja/cpu-feature-overrides.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003, 2004 Ralf Baechle - */ -#ifndef __ASM_MACH_JA_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_JA_CPU_FEATURE_OVERRIDES_H - -/* - * Momentum Jaguar ATX always has the RM9000 processor. - */ -#define cpu_has_watch 1 -#define cpu_has_mips16 0 -#define cpu_has_divec 0 -#define cpu_has_vce 0 -#define cpu_has_cache_cdex_p 0 -#define cpu_has_cache_cdex_s 0 -#define cpu_has_prefetch 1 -#define cpu_has_mcheck 0 -#define cpu_has_ejtag 0 - -#define cpu_has_llsc 1 -#define cpu_has_vtag_icache 0 -#define cpu_has_dc_aliases 0 -#define cpu_has_ic_fills_f_dc 0 -#define cpu_has_dsp 0 -#define cpu_icache_snoops_remote_store 0 - -#define cpu_has_nofpuex 0 -#define cpu_has_64bits 1 - -#define cpu_has_inclusive_pcaches 0 - -#define cpu_dcache_line_size() 32 -#define cpu_icache_line_size() 32 -#define cpu_scache_line_size() 32 - -#define cpu_has_mips32r1 0 -#define cpu_has_mips32r2 0 -#define cpu_has_mips64r1 0 -#define cpu_has_mips64r2 0 - -#endif /* __ASM_MACH_JA_CPU_FEATURE_OVERRIDES_H */ diff --git a/include/asm-mips/mach-ja/spaces.h b/include/asm-mips/mach-ja/spaces.h deleted file mode 100644 index 8466a0e69c79..000000000000 --- a/include/asm-mips/mach-ja/spaces.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle - * Copyright (C) 2000, 2002 Maciej W. Rozycki - * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc. - */ -#ifndef __ASM_MACH_JA_SPACES_H -#define __ASM_MACH_JA_SPACES_H - -/* - * Memory above this physical address will be considered highmem. - */ -#define HIGHMEM_START 0x08000000UL - -#include_next <spaces.h> - -#endif /* __ASM_MACH_JA_SPACES_H */ diff --git a/include/asm-mips/mips-boards/malta.h b/include/asm-mips/mips-boards/malta.h index b0ba3c5a921e..eec91001bb65 100644 --- a/include/asm-mips/mips-boards/malta.h +++ b/include/asm-mips/mips-boards/malta.h @@ -25,6 +25,10 @@ #include <asm/mips-boards/msc01_pci.h> #include <asm/gt64120.h> +/* Mips interrupt controller found in SOCit variations */ +#define MIPS_MSC01_IC_REG_BASE 0x1bc40000 +#define MIPS_SOCITSC_IC_REG_BASE 0x1ffa0000 + /* * Malta I/O ports base address for the Galileo GT64120 and Algorithmics * Bonito system controllers. diff --git a/include/asm-mips/msc01_ic.h b/include/asm-mips/msc01_ic.h index aa7ad9a71762..7989b9ffc1d2 100644 --- a/include/asm-mips/msc01_ic.h +++ b/include/asm-mips/msc01_ic.h @@ -94,10 +94,7 @@ /* * MIPS System controller interrupt register base. * - * FIXME - are these macros specific to Malta and co or to the MSC? If the - * latter, they should be moved elsewhere. */ -#define MIPS_MSC01_IC_REG_BASE 0x1bc40000 /***************************************************************************** * Absolute register addresses @@ -144,7 +141,7 @@ typedef struct msc_irqmap { #define MSC01_IRQ_LEVEL 0 #define MSC01_IRQ_EDGE 1 -extern void __init init_msc_irqs(unsigned int base, msc_irqmap_t *imp, int nirq); +extern void __init init_msc_irqs(unsigned long icubase, unsigned int base, msc_irqmap_t *imp, int nirq); extern void ll_msc_irq(void); #endif /* __ASM_MIPS_BOARDS_MSC01_IC_H */ diff --git a/include/asm-mips/page.h b/include/asm-mips/page.h index d3fbd83ff545..5c3239dad0f2 100644 --- a/include/asm-mips/page.h +++ b/include/asm-mips/page.h @@ -190,10 +190,6 @@ typedef struct { unsigned long pgprot; } pgprot_t; #define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE) #define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET) -#ifdef CONFIG_LIMITED_DMA -#define WANT_PAGE_VIRTUAL -#endif - #include <asm-generic/memory_model.h> #include <asm-generic/page.h> diff --git a/include/asm-mips/serial.h b/include/asm-mips/serial.h index d7a65135d837..ce51213d84f9 100644 --- a/include/asm-mips/serial.h +++ b/include/asm-mips/serial.h @@ -81,25 +81,6 @@ #define STD_SERIAL_PORT_DEFNS #endif /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */ -#ifdef CONFIG_MOMENCO_JAGUAR_ATX -/* Ordinary NS16552 duart with a 20MHz crystal. */ -#define JAGUAR_ATX_UART_CLK 20000000 -#define JAGUAR_ATX_BASE_BAUD (JAGUAR_ATX_UART_CLK / 16) - -#define JAGUAR_ATX_SERIAL1_IRQ 6 -#define JAGUAR_ATX_SERIAL1_BASE 0xfd000023L - -#define _JAGUAR_ATX_SERIAL_INIT(int, base) \ - { .baud_base = JAGUAR_ATX_BASE_BAUD, irq: int, \ - .flags = (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ - .iomem_base = (u8 *) base, iomem_reg_shift: 2, \ - io_type: SERIAL_IO_MEM } -#define MOMENCO_JAGUAR_ATX_SERIAL_PORT_DEFNS \ - _JAGUAR_ATX_SERIAL_INIT(JAGUAR_ATX_SERIAL1_IRQ, JAGUAR_ATX_SERIAL1_BASE) -#else -#define MOMENCO_JAGUAR_ATX_SERIAL_PORT_DEFNS -#endif - #ifdef CONFIG_MOMENCO_OCELOT_3 #define OCELOT_3_BASE_BAUD ( 20000000 / 16 ) #define OCELOT_3_SERIAL_IRQ 6 @@ -134,27 +115,6 @@ #define MOMENCO_OCELOT_SERIAL_PORT_DEFNS #endif -#ifdef CONFIG_MOMENCO_OCELOT_G -/* Ordinary NS16552 duart with a 20MHz crystal. */ -#define OCELOT_G_BASE_BAUD ( 20000000 / 16 ) - -#define OCELOT_G_SERIAL1_IRQ 4 -#if 0 -#define OCELOT_G_SERIAL1_BASE 0xe0001020 -#else -#define OCELOT_G_SERIAL1_BASE 0xfd000020 -#endif - -#define _OCELOT_G_SERIAL_INIT(int, base) \ - { .baud_base = OCELOT_G_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS,\ - .iomem_base = (u8 *) base, .iomem_reg_shift = 2, \ - .io_type = SERIAL_IO_MEM } -#define MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS \ - _OCELOT_G_SERIAL_INIT(OCELOT_G_SERIAL1_IRQ, OCELOT_G_SERIAL1_BASE) -#else -#define MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS -#endif - #ifdef CONFIG_MOMENCO_OCELOT_C /* Ordinary NS16552 duart with a 20MHz crystal. */ #define OCELOT_C_BASE_BAUD ( 20000000 / 16 ) @@ -210,7 +170,6 @@ IP32_SERIAL_PORT_DEFNS \ JAZZ_SERIAL_PORT_DEFNS \ STD_SERIAL_PORT_DEFNS \ - MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS \ MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS \ MOMENCO_OCELOT_SERIAL_PORT_DEFNS \ MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS diff --git a/include/asm-mips/system.h b/include/asm-mips/system.h index 3713d256d369..bb0b289dbc9e 100644 --- a/include/asm-mips/system.h +++ b/include/asm-mips/system.h @@ -464,7 +464,10 @@ static inline unsigned long __cmpxchg_local(volatile void * ptr, extern void set_handler (unsigned long offset, void *addr, unsigned long len); extern void set_uncached_handler (unsigned long offset, void *addr, unsigned long len); -extern void *set_vi_handler (int n, void *addr); + +typedef void (*vi_handler_t)(void); +extern void *set_vi_handler (int n, vi_handler_t addr); + extern void *set_except_vector(int n, void *addr); extern unsigned long ebase; extern void per_cpu_trap_init(void); |