diff options
| author | Bruce Allan <bruce.w.allan@intel.com> | 2010-05-10 15:01:30 +0000 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2010-05-12 23:31:12 -0700 |
| commit | eab50ffb222808b5053a82325be3e5d26faa08df (patch) | |
| tree | 6b9b398d4631c96783af1805b01491726ae00df4 | |
| parent | 8b802a7e94c2ed9c6032a88b3ab9860c55cd6378 (diff) | |
e1000e: Incorrect function pointer set for force_speed_duplex on 82577
The force_speed_duplex function pointer was incorrectly set. Instead of
calling the 82577-specific version it was calling the m88 version which,
among other incorrect things, reset the PHY causing autonegotiation to be
re-enabled in the PHY resulting in the link defaulting to half-duplex.
The 82577-specific force_speed_duplex function also had an issue where
it disabled Auto-MDI-X which caused the link to not come up.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
| -rw-r--r-- | drivers/net/e1000e/ich8lan.c | 1 | ||||
| -rw-r--r-- | drivers/net/e1000e/phy.c | 21 |
2 files changed, 2 insertions, 20 deletions
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 61f89275d7c3..e1f244a47807 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -330,6 +330,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) phy->ops.get_cable_length = e1000_get_cable_length_82577; phy->ops.get_info = e1000_get_phy_info_82577; phy->ops.commit = e1000e_phy_sw_reset; + break; case e1000_phy_82578: phy->ops.check_polarity = e1000_check_polarity_m88; phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_m88; diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 7f3ceb9dad6a..b4ac82d51b20 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -3116,9 +3116,7 @@ s32 e1000_check_polarity_82577(struct e1000_hw *hw) * e1000_phy_force_speed_duplex_82577 - Force speed/duplex for I82577 PHY * @hw: pointer to the HW structure * - * Calls the PHY setup function to force speed and duplex. Clears the - * auto-crossover to force MDI manually. Waits for link and returns - * successful if link up is successful, else -E1000_ERR_PHY (-2). + * Calls the PHY setup function to force speed and duplex. **/ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw) { @@ -3137,23 +3135,6 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw) if (ret_val) goto out; - /* - * Clear Auto-Crossover to force MDI manually. 82577 requires MDI - * forced whenever speed and duplex are forced. - */ - ret_val = phy->ops.read_reg(hw, I82577_PHY_CTRL_2, &phy_data); - if (ret_val) - goto out; - - phy_data &= ~I82577_PHY_CTRL2_AUTO_MDIX; - phy_data &= ~I82577_PHY_CTRL2_FORCE_MDI_MDIX; - - ret_val = phy->ops.write_reg(hw, I82577_PHY_CTRL_2, phy_data); - if (ret_val) - goto out; - - e_dbg("I82577_PHY_CTRL_2: %X\n", phy_data); - udelay(1); if (phy->autoneg_wait_to_complete) { |