summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorMichal Simek <monstr@monstr.eu>2010-03-23 15:37:02 +0100
committerMichal Simek <monstr@monstr.eu>2010-04-01 08:38:24 +0200
commit78ebfa884bcef125464399f8d1cb05937bfeb6e1 (patch)
tree594faeddafb18ab0deca09ef5cc119d21aee4e0e
parent13851966da54be8e37863aa93ee2c8f3d3a3186a (diff)
microblaze: Adding likely macros
On the base on GCOV analytics is helpful to add likely/unlikely macros. Signed-off-by: Michal Simek <monstr@monstr.eu>
-rw-r--r--arch/microblaze/kernel/dma.c2
-rw-r--r--arch/microblaze/kernel/process.c9
-rw-r--r--arch/microblaze/lib/memcpy.c2
-rw-r--r--arch/microblaze/lib/memset.c15
-rw-r--r--arch/microblaze/mm/fault.c24
-rw-r--r--arch/microblaze/mm/pgtable.c2
6 files changed, 28 insertions, 26 deletions
diff --git a/arch/microblaze/kernel/dma.c b/arch/microblaze/kernel/dma.c
index b1084974fccd..4d5b0311601b 100644
--- a/arch/microblaze/kernel/dma.c
+++ b/arch/microblaze/kernel/dma.c
@@ -37,7 +37,7 @@ static inline void __dma_sync_page(unsigned long paddr, unsigned long offset,
static unsigned long get_dma_direct_offset(struct device *dev)
{
- if (dev)
+ if (likely(dev))
return (unsigned long)dev->archdata.dma_data;
return PCI_DRAM_OFFSET; /* FIXME Not sure if is correct */
diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index 35efb2f42d50..09bed44dfcd3 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -75,7 +75,10 @@ __setup("hlt", hlt_setup);
void default_idle(void)
{
- if (!hlt_counter) {
+ if (likely(hlt_counter)) {
+ while (!need_resched())
+ cpu_relax();
+ } else {
clear_thread_flag(TIF_POLLING_NRFLAG);
smp_mb__after_clear_bit();
local_irq_disable();
@@ -83,9 +86,7 @@ void default_idle(void)
cpu_sleep();
local_irq_enable();
set_thread_flag(TIF_POLLING_NRFLAG);
- } else
- while (!need_resched())
- cpu_relax();
+ }
}
void cpu_idle(void)
diff --git a/arch/microblaze/lib/memcpy.c b/arch/microblaze/lib/memcpy.c
index cc2108b6b260..014bac92bdff 100644
--- a/arch/microblaze/lib/memcpy.c
+++ b/arch/microblaze/lib/memcpy.c
@@ -53,7 +53,7 @@ void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c)
const uint32_t *i_src;
uint32_t *i_dst;
- if (c >= 4) {
+ if (likely(c >= 4)) {
unsigned value, buf_hold;
/* Align the dstination to a word boundry. */
diff --git a/arch/microblaze/lib/memset.c b/arch/microblaze/lib/memset.c
index 4df851d41a29..ecfb663e1fc1 100644
--- a/arch/microblaze/lib/memset.c
+++ b/arch/microblaze/lib/memset.c
@@ -33,22 +33,23 @@
#ifdef __HAVE_ARCH_MEMSET
void *memset(void *v_src, int c, __kernel_size_t n)
{
-
char *src = v_src;
#ifdef CONFIG_OPT_LIB_FUNCTION
uint32_t *i_src;
- uint32_t w32;
+ uint32_t w32 = 0;
#endif
/* Truncate c to 8 bits */
c = (c & 0xFF);
#ifdef CONFIG_OPT_LIB_FUNCTION
- /* Make a repeating word out of it */
- w32 = c;
- w32 |= w32 << 8;
- w32 |= w32 << 16;
+ if (unlikely(c)) {
+ /* Make a repeating word out of it */
+ w32 = c;
+ w32 |= w32 << 8;
+ w32 |= w32 << 16;
+ }
- if (n >= 4) {
+ if (likely(n >= 4)) {
/* Align the destination to a word boundary */
/* This is done in an endian independant manner */
switch ((unsigned) src & 3) {
diff --git a/arch/microblaze/mm/fault.c b/arch/microblaze/mm/fault.c
index d9d249a66ff2..7af87f4b2c2c 100644
--- a/arch/microblaze/mm/fault.c
+++ b/arch/microblaze/mm/fault.c
@@ -106,7 +106,7 @@ void do_page_fault(struct pt_regs *regs, unsigned long address,
regs->esr = error_code;
/* On a kernel SLB miss we can only check for a valid exception entry */
- if (kernel_mode(regs) && (address >= TASK_SIZE)) {
+ if (unlikely(kernel_mode(regs) && (address >= TASK_SIZE))) {
printk(KERN_WARNING "kernel task_size exceed");
_exception(SIGSEGV, regs, code, address);
}
@@ -122,7 +122,7 @@ void do_page_fault(struct pt_regs *regs, unsigned long address,
}
#endif /* CONFIG_KGDB */
- if (in_atomic() || !mm) {
+ if (unlikely(in_atomic() || !mm)) {
if (kernel_mode(regs))
goto bad_area_nosemaphore;
@@ -150,7 +150,7 @@ void do_page_fault(struct pt_regs *regs, unsigned long address,
* source. If this is invalid we can skip the address space check,
* thus avoiding the deadlock.
*/
- if (!down_read_trylock(&mm->mmap_sem)) {
+ if (unlikely(!down_read_trylock(&mm->mmap_sem))) {
if (kernel_mode(regs) && !search_exception_tables(regs->pc))
goto bad_area_nosemaphore;
@@ -158,16 +158,16 @@ void do_page_fault(struct pt_regs *regs, unsigned long address,
}
vma = find_vma(mm, address);
- if (!vma)
+ if (unlikely(!vma))
goto bad_area;
if (vma->vm_start <= address)
goto good_area;
- if (!(vma->vm_flags & VM_GROWSDOWN))
+ if (unlikely(!(vma->vm_flags & VM_GROWSDOWN)))
goto bad_area;
- if (!is_write)
+ if (unlikely(!is_write))
goto bad_area;
/*
@@ -179,7 +179,7 @@ void do_page_fault(struct pt_regs *regs, unsigned long address,
* before setting the user r1. Thus we allow the stack to
* expand to 1MB without further checks.
*/
- if (address + 0x100000 < vma->vm_end) {
+ if (unlikely(address + 0x100000 < vma->vm_end)) {
/* get user regs even if this fault is in kernel mode */
struct pt_regs *uregs = current->thread.regs;
@@ -209,15 +209,15 @@ good_area:
code = SEGV_ACCERR;
/* a write */
- if (is_write) {
- if (!(vma->vm_flags & VM_WRITE))
+ if (unlikely(is_write)) {
+ if (unlikely(!(vma->vm_flags & VM_WRITE)))
goto bad_area;
/* a read */
} else {
/* protection fault */
- if (error_code & 0x08000000)
+ if (unlikely(error_code & 0x08000000))
goto bad_area;
- if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
+ if (unlikely(!(vma->vm_flags & (VM_READ | VM_EXEC))))
goto bad_area;
}
@@ -235,7 +235,7 @@ survive:
goto do_sigbus;
BUG();
}
- if (fault & VM_FAULT_MAJOR)
+ if (unlikely(fault & VM_FAULT_MAJOR))
current->maj_flt++;
else
current->min_flt++;
diff --git a/arch/microblaze/mm/pgtable.c b/arch/microblaze/mm/pgtable.c
index 63a6fd07c48f..d31312cde6ea 100644
--- a/arch/microblaze/mm/pgtable.c
+++ b/arch/microblaze/mm/pgtable.c
@@ -154,7 +154,7 @@ int map_page(unsigned long va, phys_addr_t pa, int flags)
err = 0;
set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT,
__pgprot(flags)));
- if (mem_init_done)
+ if (unlikely(mem_init_done))
flush_HPTE(0, va, pmd_val(*pd));
/* flush_HPTE(0, va, pg); */
}