Merge tag 'rtc-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "There is one new driver and then most of the changes are the device
  tree bindings conversions to yaml.

  New driver:
   - Epson RX8111

  Drivers:
   - Many Device Tree bindings conversions to dtschema
   - pcf8563: wakeup-source support"

* tag 'rtc-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  pcf8563: add wakeup-source support
  rtc: rx8111: handle VLOW flag
  rtc: rx8111: demote warnings to debug level
  rtc: rx6110: Constify struct regmap_config
  dt-bindings: rtc: convert trivial devices into dtschema
  dt-bindings: rtc: stmp3xxx-rtc: convert to dtschema
  dt-bindings: rtc: pxa-rtc: convert to dtschema
  rtc: Add driver for Epson RX8111
  dt-bindings: rtc: Add Epson RX8111
  rtc: mcp795: drop unneeded MODULE_ALIAS
  rtc: nuvoton: Modify part number value
  rtc: test: Split rtc unit test into slow and normal speed test
  dt-bindings: rtc: nxp,lpc1788-rtc: convert to dtschema
  dt-bindings: rtc: digicolor-rtc: move to trivial-rtc
  dt-bindings: rtc: alphascale,asm9260-rtc: convert to dtschema
  dt-bindings: rtc: armada-380-rtc: convert to dtschema
  rtc: cros-ec: provide ID table for avoiding fallback match

29 files changed, 702 insertions, 250 deletions

diff --git a/Documentation/devicetree/bindings/rtc/alphascale,asm9260-rtc.txt b/Documentation/devicetree/bindings/rtc/alphascale,asm9260-rtc.txt
deleted file mode 100644
index 76ebca568db9..000000000000
--- a/Documentation/devicetree/bindings/rtc/alphascale,asm9260-rtc.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-* Alphascale asm9260 SoC Real Time Clock
-
-Required properties:
-- compatible: Should be "alphascale,asm9260-rtc"
-- reg: Physical base address of the controller and length
-       of memory mapped region.
-- interrupts: IRQ line for the RTC.
-- clocks: Reference to the clock entry.
-- clock-names: should contain:
-  * "ahb" for the SoC RTC clock
-
-Example:
-rtc0: rtc@800a0000 {
-	compatible = "alphascale,asm9260-rtc";
-	reg = <0x800a0000 0x100>;
-	clocks = <&acc CLKID_AHB_RTC>;
-	clock-names = "ahb";
-	interrupts = <2>;
-};
diff --git a/Documentation/devicetree/bindings/rtc/alphascale,asm9260-rtc.yaml b/Documentation/devicetree/bindings/rtc/alphascale,asm9260-rtc.yaml
new file mode 100644
index 000000000000..f955a7f638ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/alphascale,asm9260-rtc.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/alphascale,asm9260-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Alphascale asm9260 SoC Real Time Clock
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    const: alphascale,asm9260-rtc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ahb
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/alphascale,asm9260.h>
+
+    rtc@800a0000 {
+        compatible = "alphascale,asm9260-rtc";
+        reg = <0x800a0000 0x100>;
+        clocks = <&acc CLKID_AHB_RTC>;
+        clock-names = "ahb";
+        interrupts = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt b/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt
deleted file mode 100644
index c3c9a1226f9a..000000000000
--- a/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* Real Time Clock of the Armada 38x/7K/8K SoCs
-
-RTC controller for the Armada 38x, 7K and 8K SoCs
-
-Required properties:
-- compatible : Should be one of the following:
-	"marvell,armada-380-rtc" for Armada 38x SoC
-	"marvell,armada-8k-rtc" for Aramda 7K/8K SoCs
-- reg: a list of base address and size pairs, one for each entry in
-  reg-names
-- reg names: should contain:
-  * "rtc" for the RTC registers
-  * "rtc-soc" for the SoC related registers and among them the one
-    related to the interrupt.
-- interrupts: IRQ line for the RTC.
-
-Example:
-
-rtc@a3800 {
-	compatible = "marvell,armada-380-rtc";
-	reg = <0xa3800 0x20>, <0x184a0 0x0c>;
-	reg-names = "rtc", "rtc-soc";
-	interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-};
diff --git a/Documentation/devicetree/bindings/rtc/digicolor-rtc.txt b/Documentation/devicetree/bindings/rtc/digicolor-rtc.txt
deleted file mode 100644
index d464986012cd..000000000000
--- a/Documentation/devicetree/bindings/rtc/digicolor-rtc.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Conexant Digicolor Real Time Clock controller
-
-This binding currently supports the CX92755 SoC.
-
-Required properties:
-- compatible: should be "cnxt,cx92755-rtc"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- interrupts: rtc alarm interrupt
-
-Example:
-
-	rtc@f0000c30 {
-		compatible = "cnxt,cx92755-rtc";
-		reg = <0xf0000c30 0x18>;
-		interrupts = <25>;
-	};
diff --git a/Documentation/devicetree/bindings/rtc/fsl,stmp3xxx-rtc.yaml b/Documentation/devicetree/bindings/rtc/fsl,stmp3xxx-rtc.yaml
new file mode 100644
index 000000000000..534de4196a4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/fsl,stmp3xxx-rtc.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/fsl,stmp3xxx-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMP3xxx/i.MX28 Time Clock Controller
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx28-rtc
+              - fsl,imx23-rtc
+          - const: fsl,stmp3xxx-rtc
+      - const: fsl,stmp3xxx-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  stmp,crystal-freq:
+    description:
+      Override crystal frequency as determined from fuse bits.
+      Use <0> for "no crystal".
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 32000, 32768]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    rtc@80056000 {
+        compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
+        reg = <0x80056000 2000>;
+        interrupts = <29>;
+    };
diff --git a/Documentation/devicetree/bindings/rtc/google,goldfish-rtc.txt b/Documentation/devicetree/bindings/rtc/google,goldfish-rtc.txt
deleted file mode 100644
index 634312dd95ca..000000000000
--- a/Documentation/devicetree/bindings/rtc/google,goldfish-rtc.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Android Goldfish RTC
-
-Android Goldfish RTC device used by Android emulator.
-
-Required properties:
-
-- compatible : should contain "google,goldfish-rtc"
-- reg        : <registers mapping>
-- interrupts : <interrupt mapping>
-
-Example:
-
-	goldfish_timer@9020000 {
-		compatible = "google,goldfish-rtc";
-		reg = <0x9020000 0x1000>;
-		interrupts = <0x3>;
-	};
diff --git a/Documentation/devicetree/bindings/rtc/lpc32xx-rtc.txt b/Documentation/devicetree/bindings/rtc/lpc32xx-rtc.txt
deleted file mode 100644
index a87a1e9bc060..000000000000
--- a/Documentation/devicetree/bindings/rtc/lpc32xx-rtc.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-* NXP LPC32xx SoC Real Time Clock controller
-
-Required properties:
-- compatible: must be "nxp,lpc3220-rtc"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- interrupts: The RTC interrupt
-
-Example:
-
-	rtc@40024000 {
-		compatible = "nxp,lpc3220-rtc";
-		reg = <0x40024000 0x1000>;
-		interrupts = <52 0>;
-	};
diff --git a/Documentation/devicetree/bindings/rtc/marvell,armada-380-rtc.yaml b/Documentation/devicetree/bindings/rtc/marvell,armada-380-rtc.yaml
new file mode 100644
index 000000000000..adf3ba0cd09f
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/marvell,armada-380-rtc.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/marvell,armada-380-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RTC controller for the Armada 38x, 7K and 8K SoCs
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - marvell,armada-380-rtc
+      - marvell,armada-8k-rtc
+
+  reg:
+    items:
+      - description: RTC base address size
+      - description: Base address and size of SoC related registers
+
+  reg-names:
+    items:
+      - const: rtc
+      - const: rtc-soc
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    rtc@a3800 {
+        compatible = "marvell,armada-380-rtc";
+        reg = <0xa3800 0x20>, <0x184a0 0x0c>;
+        reg-names = "rtc", "rtc-soc";
+        interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/rtc/marvell,pxa-rtc.yaml b/Documentation/devicetree/bindings/rtc/marvell,pxa-rtc.yaml
new file mode 100644
index 000000000000..43d68681a1bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/marvell,pxa-rtc.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/marvell,pxa-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PXA Real Time Clock
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    const: marvell,pxa-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: 1 Hz
+      - description: Alarm
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    rtc@40900000 {
+        compatible = "marvell,pxa-rtc";
+        reg = <0x40900000 0x3c>;
+        interrupts = <30>, <31>;
+    };
diff --git a/Documentation/devicetree/bindings/rtc/maxim,ds1742.txt b/Documentation/devicetree/bindings/rtc/maxim,ds1742.txt
deleted file mode 100644
index d0f937c355b5..000000000000
--- a/Documentation/devicetree/bindings/rtc/maxim,ds1742.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-* Maxim (Dallas) DS1742/DS1743 Real Time Clock
-
-Required properties:
-- compatible: Should contain "maxim,ds1742".
-- reg: Physical base address of the RTC and length of memory
-  mapped region.
-
-Example:
-	rtc: rtc@10000000 {
-		compatible = "maxim,ds1742";
-		reg = <0x10000000 0x800>;
-	};
diff --git a/Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.txt b/Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.txt
deleted file mode 100644
index 3c97bd180592..000000000000
--- a/Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-NXP LPC1788 real-time clock
-
-The LPC1788 RTC provides calendar and clock functionality
-together with periodic tick and alarm interrupt support.
-
-Required properties:
-- compatible	: must contain "nxp,lpc1788-rtc"
-- reg		: Specifies base physical address and size of the registers.
-- interrupts	: A single interrupt specifier.
-- clocks	: Must contain clock specifiers for rtc and register clock
-- clock-names	: Must contain "rtc" and "reg"
-  See ../clocks/clock-bindings.txt for details.
-
-Example:
-rtc: rtc@40046000 {
-	compatible = "nxp,lpc1788-rtc";
-	reg = <0x40046000 0x1000>;
-	interrupts = <47>;
-	clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>;
-	clock-names = "rtc", "reg";
-};
diff --git a/Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.yaml b/Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.yaml
new file mode 100644
index 000000000000..e88b847a1cc5
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/nxp,lpc1788-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC1788 real-time clock
+
+description:
+  The LPC1788 RTC provides calendar and clock functionality
+  together with periodic tick and alarm interrupt support.
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    const: nxp,lpc1788-rtc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: RTC clock
+      - description: Register clock
+
+  clock-names:
+    items:
+      - const: rtc
+      - const: reg
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/lpc18xx-ccu.h>
+
+    rtc@40046000 {
+        compatible = "nxp,lpc1788-rtc";
+        reg = <0x40046000 0x1000>;
+        clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>;
+        clock-names = "rtc", "reg";
+        interrupts = <47>;
+    };
diff --git a/Documentation/devicetree/bindings/rtc/orion-rtc.txt b/Documentation/devicetree/bindings/rtc/orion-rtc.txt
deleted file mode 100644
index 3bf63ffa5160..000000000000
--- a/Documentation/devicetree/bindings/rtc/orion-rtc.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-* Mvebu Real Time Clock
-
-RTC controller for the Kirkwood, the Dove, the Armada 370 and the
-Armada XP SoCs
-
-Required properties:
-- compatible : Should be "marvell,orion-rtc"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- interrupts: IRQ line for the RTC.
-
-Example:
-
-rtc@10300 {
-        compatible = "marvell,orion-rtc";
-        reg = <0xd0010300 0x20>;
-        interrupts = <50>;
-};
diff --git a/Documentation/devicetree/bindings/rtc/pxa-rtc.txt b/Documentation/devicetree/bindings/rtc/pxa-rtc.txt
deleted file mode 100644
index 8c6672a1b7d7..000000000000
--- a/Documentation/devicetree/bindings/rtc/pxa-rtc.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-* PXA RTC
-
-PXA specific RTC driver.
-
-Required properties:
-- compatible : Should be "marvell,pxa-rtc"
-
-Examples:
-
-rtc@40900000 {
-	compatible = "marvell,pxa-rtc";
-	reg = <0x40900000 0x3c>;
-	interrupts = <30 31>;
-};
diff --git a/Documentation/devicetree/bindings/rtc/rtc-aspeed.txt b/Documentation/devicetree/bindings/rtc/rtc-aspeed.txt
deleted file mode 100644
index 2e956b3dc276..000000000000
--- a/Documentation/devicetree/bindings/rtc/rtc-aspeed.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-ASPEED BMC RTC
-==============
-
-Required properties:
- - compatible: should be one of the following
-   * aspeed,ast2400-rtc for the ast2400
-   * aspeed,ast2500-rtc for the ast2500
-   * aspeed,ast2600-rtc for the ast2600
-
- - reg: physical base address of the controller and length of memory mapped
-   region
-
- - interrupts: The interrupt number
-
-Example:
-
-   rtc@1e781000 {
-           compatible = "aspeed,ast2400-rtc";
-           reg = <0x1e781000 0x18>;
-           interrupts = <22>;
-           status = "disabled";
-   };
diff --git a/Documentation/devicetree/bindings/rtc/spear-rtc.txt b/Documentation/devicetree/bindings/rtc/spear-rtc.txt
deleted file mode 100644
index fecf8e4ad4b4..000000000000
--- a/Documentation/devicetree/bindings/rtc/spear-rtc.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-* SPEAr RTC
-
-Required properties:
-- compatible : "st,spear600-rtc"
-- reg : Address range of the rtc registers
-- interrupt: Should contain the rtc interrupt number
-
-Example:
-
-	rtc@fc000000 {
-		compatible = "st,spear600-rtc";
-		reg = <0xfc000000 0x1000>;
-		interrupt-parent = <&vic1>;
-		interrupts = <12>;
-	};
diff --git a/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
deleted file mode 100644
index fa6a94226669..000000000000
--- a/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-* STMP3xxx/i.MX28 Time Clock controller
-
-Required properties:
-- compatible: should be one of the following.
-    * "fsl,stmp3xxx-rtc"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- interrupts: rtc alarm interrupt
-
-Optional properties:
-- stmp,crystal-freq: override crystal frequency as determined from fuse bits.
-  Only <32000> and <32768> are possible for the hardware.  Use <0> for
-  "no crystal".
-
-Example:
-
-rtc@80056000 {
-	compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
-	reg = <0x80056000 2000>;
-	interrupts = <29>;
-};
diff --git a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
index c9e3c5262c21..fffd759c603f 100644
--- a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
@@ -24,6 +24,14 @@ properties:
       - abracon,abb5zes3
       # AB-RTCMC-32.768kHz-EOZ9: Real Time Clock/Calendar Module with I2C Interface
       - abracon,abeoz9
+      # ASPEED BMC ast2400 Real-time Clock
+      - aspeed,ast2400-rtc
+      # ASPEED BMC ast2500 Real-time Clock
+      - aspeed,ast2500-rtc
+      # ASPEED BMC ast2600 Real-time Clock
+      - aspeed,ast2600-rtc
+      # Conexant Digicolor Real Time Clock Controller
+      - cnxt,cx92755-rtc
       # I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output
       - dallas,ds1374
       # Dallas DS1672 Real-time Clock
@@ -38,19 +46,28 @@ properties:
       - epson,rx8025
       - epson,rx8035
       # I2C-BUS INTERFACE REAL TIME CLOCK MODULE with Battery Backed RAM
+      - epson,rx8111
       - epson,rx8571
       # I2C-BUS INTERFACE REAL TIME CLOCK MODULE
       - epson,rx8581
+      # Android Goldfish Real-time Clock
+      - google,goldfish-rtc
       # Intersil ISL1208 Low Power RTC with Battery Backed SRAM
       - isil,isl1208
       # Intersil ISL1218 Low Power RTC with Battery Backed SRAM
       - isil,isl1218
+      # Mvebu Real-time Clock
+      - marvell,orion-rtc
+      # Maxim DS1742/DS1743 Real-time Clock
+      - maxim,ds1742
       # SPI-BUS INTERFACE REAL TIME CLOCK MODULE
       - maxim,mcp795
       # Real Time Clock Module with I2C-Bus
       - microcrystal,rv3029
       # Real Time Clock
       - microcrystal,rv8523
+      # NXP LPC32xx SoC Real-time Clock
+      - nxp,lpc3220-rtc
       # Real-time Clock Module
       - pericom,pt7c4338
       # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
@@ -67,6 +84,10 @@ properties:
       - ricoh,rv5c387a
       # 2-wire CMOS real-time clock
       - sii,s35390a
+      # ST SPEAr Real-time Clock
+      - st,spear600-rtc
+      # VIA/Wondermedia VT8500 Real-time Clock
+      - via,vt8500-rtc
       # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
       - whwave,sd3078
       # Xircom X1205 I2C RTC
diff --git a/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt b/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt
deleted file mode 100644
index 3c0484c49582..000000000000
--- a/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-VIA/Wondermedia VT8500 Realtime Clock Controller
------------------------------------------------------
-
-Required properties:
-- compatible : "via,vt8500-rtc"
-- reg : Should contain 1 register ranges(address and length)
-- interrupts : alarm interrupt
-
-Example:
-
-	rtc@d8100000 {
-		compatible = "via,vt8500-rtc";
-		reg = <0xd8100000 0x10000>;
-		interrupts = <48>;
-	};
diff --git a/MAINTAINERS b/MAINTAINERS
index 27367ad339ea..d6c90161c7bf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1500,7 +1500,6 @@ F:	drivers/irqchip/irq-goldfish-pic.c
 ANDROID GOLDFISH RTC DRIVER
 M:	Jiaxun Yang <jiaxun.yang@flygoat.com>
 S:	Supported
-F:	Documentation/devicetree/bindings/rtc/google,goldfish-rtc.txt
 F:	drivers/rtc/rtc-goldfish.c
 
 AOA (Apple Onboard Audio) ALSA DRIVER
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index c63e32d012f2..2a95b05982ad 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -664,6 +664,16 @@ config RTC_DRV_RX8010
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-rx8010.
 
+config RTC_DRV_RX8111
+	tristate "Epson RX8111"
+	select REGMAP_I2C
+	depends on I2C
+	help
+	  If you say yes here you will get support for the Epson RX8111 RTC.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called rtc-rx8111.
+
 config RTC_DRV_RX8581
 	tristate "Epson RX-8571/RX-8581"
 	select REGMAP_I2C
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 6efff381c484..3004e372f25f 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -154,6 +154,7 @@ obj-$(CONFIG_RTC_DRV_RX4581)	+= rtc-rx4581.o
 obj-$(CONFIG_RTC_DRV_RX6110)	+= rtc-rx6110.o
 obj-$(CONFIG_RTC_DRV_RX8010)	+= rtc-rx8010.o
 obj-$(CONFIG_RTC_DRV_RX8025)	+= rtc-rx8025.o
+obj-$(CONFIG_RTC_DRV_RX8111)	+= rtc-rx8111.o
 obj-$(CONFIG_RTC_DRV_RX8581)	+= rtc-rx8581.o
 obj-$(CONFIG_RTC_DRV_RZN1)	+= rtc-rzn1.o
 obj-$(CONFIG_RTC_DRV_S35390A)	+= rtc-s35390a.o
diff --git a/drivers/rtc/lib_test.c b/drivers/rtc/lib_test.c
index 225c859d6da5..3893a202e9ea 100644
--- a/drivers/rtc/lib_test.c
+++ b/drivers/rtc/lib_test.c
@@ -27,17 +27,17 @@ static void advance_date(int *year, int *month, int *mday, int *yday)
 }
 
 /*
- * Checks every day in a 160000 years interval starting on 1970-01-01
+ * Check every day in specified number of years interval starting on 1970-01-01
  * against the expected result.
  */
-static void rtc_time64_to_tm_test_date_range(struct kunit *test)
+static void rtc_time64_to_tm_test_date_range(struct kunit *test, int years)
 {
 	/*
-	 * 160000 years	= (160000 / 400) * 400 years
-	 *		= (160000 / 400) * 146097 days
-	 *		= (160000 / 400) * 146097 * 86400 seconds
+	 * years	= (years / 400) * 400 years
+	 *		= (years / 400) * 146097 days
+	 *		= (years / 400) * 146097 * 86400 seconds
 	 */
-	time64_t total_secs = ((time64_t) 160000) / 400 * 146097 * 86400;
+	time64_t total_secs = ((time64_t)years) / 400 * 146097 * 86400;
 
 	int year	= 1970;
 	int month	= 1;
@@ -66,8 +66,27 @@ static void rtc_time64_to_tm_test_date_range(struct kunit *test)
 	}
 }
 
+/*
+ * Checks every day in a 160000 years interval starting on 1970-01-01
+ * against the expected result.
+ */
+static void rtc_time64_to_tm_test_date_range_160000(struct kunit *test)
+{
+	rtc_time64_to_tm_test_date_range(test, 160000);
+}
+
+/*
+ * Checks every day in a 1000 years interval starting on 1970-01-01
+ * against the expected result.
+ */
+static void rtc_time64_to_tm_test_date_range_1000(struct kunit *test)
+{
+	rtc_time64_to_tm_test_date_range(test, 1000);
+}
+
 static struct kunit_case rtc_lib_test_cases[] = {
-	KUNIT_CASE(rtc_time64_to_tm_test_date_range),
+	KUNIT_CASE(rtc_time64_to_tm_test_date_range_1000),
+	KUNIT_CASE_SLOW(rtc_time64_to_tm_test_date_range_160000),
 	{}
 };
 
diff --git a/drivers/rtc/rtc-cros-ec.c b/drivers/rtc/rtc-cros-ec.c
index 0cd397c04ff0..f57462c7b2c6 100644
--- a/drivers/rtc/rtc-cros-ec.c
+++ b/drivers/rtc/rtc-cros-ec.c
@@ -5,6 +5,7 @@
 // Author: Stephen Barber <smbarber@chromium.org>
 
 #include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/platform_data/cros_ec_commands.h>
 #include <linux/platform_data/cros_ec_proto.h>
@@ -392,6 +393,12 @@ static void cros_ec_rtc_remove(struct platform_device *pdev)
 		dev_err(dev, "failed to unregister notifier\n");
 }
 
+static const struct platform_device_id cros_ec_rtc_id[] = {
+	{ DRV_NAME, 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(platform, cros_ec_rtc_id);
+
 static struct platform_driver cros_ec_rtc_driver = {
 	.probe = cros_ec_rtc_probe,
 	.remove_new = cros_ec_rtc_remove,
@@ -399,6 +406,7 @@ static struct platform_driver cros_ec_rtc_driver = {
 		.name = DRV_NAME,
 		.pm = &cros_ec_rtc_pm_ops,
 	},
+	.id_table = cros_ec_rtc_id,
 };
 
 module_platform_driver(cros_ec_rtc_driver);
@@ -406,4 +414,3 @@ module_platform_driver(cros_ec_rtc_driver);
 MODULE_DESCRIPTION("RTC driver for Chrome OS ECs");
 MODULE_AUTHOR("Stephen Barber <smbarber@chromium.org>");
 MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/rtc/rtc-mcp795.c b/drivers/rtc/rtc-mcp795.c
index 0d515b3df571..e12f0f806ec4 100644
--- a/drivers/rtc/rtc-mcp795.c
+++ b/drivers/rtc/rtc-mcp795.c
@@ -450,4 +450,3 @@ module_spi_driver(mcp795_driver);
 MODULE_DESCRIPTION("MCP795 RTC SPI Driver");
 MODULE_AUTHOR("Josef Gajdusek <atx@atx.name>");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("spi:mcp795");
diff --git a/drivers/rtc/rtc-nct3018y.c b/drivers/rtc/rtc-nct3018y.c
index 076d8b99f913..7a8b4de893b8 100644
--- a/drivers/rtc/rtc-nct3018y.c
+++ b/drivers/rtc/rtc-nct3018y.c
@@ -517,12 +517,15 @@ static int nct3018y_probe(struct i2c_client *client)
 	if (nct3018y->part_num < 0) {
 		dev_dbg(&client->dev, "Failed to read NCT3018Y_REG_PART.\n");
 		return nct3018y->part_num;
-	} else if (nct3018y->part_num == NCT3018Y_REG_PART_NCT3018Y) {
-		flags = NCT3018Y_BIT_HF;
-		err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_CTRL, flags);
-		if (err < 0) {
-			dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_CTRL.\n");
-			return err;
+	} else {
+		nct3018y->part_num &= 0x03; /* Part number is corresponding to bit 0 and 1 */
+		if (nct3018y->part_num == NCT3018Y_REG_PART_NCT3018Y) {
+			flags = NCT3018Y_BIT_HF;
+			err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_CTRL, flags);
+			if (err < 0) {
+				dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_CTRL.\n");
+				return err;
+			}
 		}
 	}
 
diff --git a/drivers/rtc/rtc-pcf8563.c b/drivers/rtc/rtc-pcf8563.c
index ea82b89d8929..1949d7473310 100644
--- a/drivers/rtc/rtc-pcf8563.c
+++ b/drivers/rtc/rtc-pcf8563.c
@@ -527,7 +527,6 @@ static int pcf8563_probe(struct i2c_client *client)
 
 	i2c_set_clientdata(client, pcf8563);
 	pcf8563->client = client;
-	device_set_wakeup_capable(&client->dev, 1);
 
 	/* Set timer to lowest frequency to save power (ref Haoyu datasheet) */
 	buf = PCF8563_TMRC_1_60;
@@ -553,6 +552,7 @@ static int pcf8563_probe(struct i2c_client *client)
 	/* the pcf8563 alarm only supports a minute accuracy */
 	set_bit(RTC_FEATURE_ALARM_RES_MINUTE, pcf8563->rtc->features);
 	clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, pcf8563->rtc->features);
+	clear_bit(RTC_FEATURE_ALARM, pcf8563->rtc->features);
 	pcf8563->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
 	pcf8563->rtc->range_max = RTC_TIMESTAMP_END_2099;
 	pcf8563->rtc->set_start_time = true;
@@ -573,7 +573,12 @@ static int pcf8563_probe(struct i2c_client *client)
 			return err;
 		}
 	} else {
-		clear_bit(RTC_FEATURE_ALARM, pcf8563->rtc->features);
+		client->irq = 0;
+	}
+
+	if (client->irq > 0 || device_property_read_bool(&client->dev, "wakeup-source")) {
+		device_init_wakeup(&client->dev, true);
+		set_bit(RTC_FEATURE_ALARM, pcf8563->rtc->features);
 	}
 
 	err = devm_rtc_register_device(pcf8563->rtc);
diff --git a/drivers/rtc/rtc-rx6110.c b/drivers/rtc/rtc-rx6110.c
index 834274db8c3f..af6dd6ccbe3b 100644
--- a/drivers/rtc/rtc-rx6110.c
+++ b/drivers/rtc/rtc-rx6110.c
@@ -330,7 +330,7 @@ static int rx6110_probe(struct rx6110_data *rx6110, struct device *dev)
 }
 
 #if IS_ENABLED(CONFIG_SPI_MASTER)
-static struct regmap_config regmap_spi_config = {
+static const struct regmap_config regmap_spi_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 	.max_register = RX6110_REG_IRQ,
@@ -410,7 +410,7 @@ static void rx6110_spi_unregister(void)
 #endif /* CONFIG_SPI_MASTER */
 
 #if IS_ENABLED(CONFIG_I2C)
-static struct regmap_config regmap_i2c_config = {
+static const struct regmap_config regmap_i2c_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 	.max_register = RX6110_REG_IRQ,
diff --git a/drivers/rtc/rtc-rx8111.c b/drivers/rtc/rtc-rx8111.c
new file mode 100644
index 000000000000..8450d9f0b566
--- /dev/null
+++ b/drivers/rtc/rtc-rx8111.c
@@ -0,0 +1,368 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for Epson RX8111 RTC.
+ *
+ * Copyright (C) 2023 Axis Communications AB
+ */
+
+#include <linux/bcd.h>
+#include <linux/bitfield.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include <linux/rtc.h>
+
+#define RX8111_REG_SEC			0x10	/* Second counter. */
+#define RX8111_REG_MIN			0x11	/* Minute counter */
+#define RX8111_REG_HOUR			0x12	/* Hour counter. */
+#define RX8111_REG_WEEK			0x13	/* Week day counter. */
+#define RX8111_REG_DAY			0x14	/* Month day counter. */
+#define RX8111_REG_MONTH		0x15	/* Month counter. */
+#define RX8111_REG_YEAR			0x16	/* Year counter. */
+
+#define RX8111_REG_ALARM_MIN		0x17	/* Alarm minute. */
+#define RX8111_REG_ALARM_HOUR		0x18	/* Alarm hour. */
+#define RX8111_REG_ALARM_WEEK_DAY	0x19	/* Alarm week or month day. */
+
+#define RX8111_REG_TIMER_COUNTER0	0x1a	/* Timer counter LSB. */
+#define RX8111_REG_TIMER_COUNTER1	0x1b	/* Timer counter. */
+#define RX8111_REG_TIMER_COUNTER2	0x1c	/* Timer counter MSB. */
+
+#define RX8111_REG_EXT			0x1d	/* Extension register. */
+#define RX8111_REG_FLAG			0x1e	/* Flag register. */
+#define RX8111_REG_CTRL			0x1f	/* Control register. */
+
+#define RX8111_REG_TS_1_1000_SEC	0x20	/* Timestamp 256 or 512 Hz . */
+#define RX8111_REG_TS_1_100_SEC		0x21	/* Timestamp 1 - 128 Hz. */
+#define RX8111_REG_TS_SEC		0x22	/* Timestamp second. */
+#define RX8111_REG_TS_MIN		0x23	/* Timestamp minute. */
+#define RX8111_REG_TS_HOUR		0x24	/* Timestamp hour. */
+#define RX8111_REG_TS_WEEK		0x25	/* Timestamp week day. */
+#define RX8111_REG_TS_DAY		0x26	/* Timestamp month day. */
+#define RX8111_REG_TS_MONTH		0x27	/* Timestamp month. */
+#define RX8111_REG_TS_YEAR		0x28	/* Timestamp year. */
+#define RX8111_REG_TS_STATUS		0x29	/* Timestamp status. */
+
+#define RX8111_REG_EVIN_SETTING		0x2b	/* Timestamp trigger setting. */
+#define RX8111_REG_ALARM_SEC		0x2c	/* Alarm second. */
+#define RX8111_REG_TIMER_CTRL		0x2d	/* Timer control. */
+#define RX8111_REG_TS_CTRL0		0x2e	/* Timestamp control 0. */
+#define RX8111_REG_CMD_TRIGGER		0x2f	/* Timestamp trigger. */
+#define RX8111_REG_PWR_SWITCH_CTRL	0x32	/* Power switch control. */
+#define RX8111_REG_STATUS_MON		0x33	/* Status monitor. */
+#define RX8111_REG_TS_CTRL1		0x34	/* Timestamp control 1. */
+#define RX8111_REG_TS_CTRL2		0x35	/* Timestamp control 2. */
+#define RX8111_REG_TS_CTRL3		0x36	/* Timestamp control 3. */
+
+#define RX8111_FLAG_XST_BIT BIT(0)
+#define RX8111_FLAG_VLF_BIT BIT(1)
+
+#define RX8111_TIME_BUF_SZ (RX8111_REG_YEAR - RX8111_REG_SEC + 1)
+
+enum rx8111_regfield {
+	/* RX8111_REG_EXT. */
+	RX8111_REGF_TSEL0,
+	RX8111_REGF_TSEL1,
+	RX8111_REGF_ETS,
+	RX8111_REGF_WADA,
+	RX8111_REGF_TE,
+	RX8111_REGF_USEL,
+	RX8111_REGF_FSEL0,
+	RX8111_REGF_FSEL1,
+
+	/* RX8111_REG_FLAG. */
+	RX8111_REGF_XST,
+	RX8111_REGF_VLF,
+	RX8111_REGF_EVF,
+	RX8111_REGF_AF,
+	RX8111_REGF_TF,
+	RX8111_REGF_UF,
+	RX8111_REGF_POR,
+
+	/* RX8111_REG_CTRL. */
+	RX8111_REGF_STOP,
+	RX8111_REGF_EIE,
+	RX8111_REGF_AIE,
+	RX8111_REGF_TIE,
+	RX8111_REGF_UIE,
+
+	/* RX8111_REG_PWR_SWITCH_CTRL. */
+	RX8111_REGF_SMPT0,
+	RX8111_REGF_SMPT1,
+	RX8111_REGF_SWSEL0,
+	RX8111_REGF_SWSEL1,
+	RX8111_REGF_INIEN,
+	RX8111_REGF_CHGEN,
+
+	/* RX8111_REG_STATUS_MON. */
+	RX8111_REGF_VLOW,
+
+	/* Sentinel value. */
+	RX8111_REGF_MAX
+};
+
+static const struct reg_field rx8111_regfields[] = {
+	[RX8111_REGF_TSEL0] = REG_FIELD(RX8111_REG_EXT, 0, 0),
+	[RX8111_REGF_TSEL1] = REG_FIELD(RX8111_REG_EXT, 1, 1),
+	[RX8111_REGF_ETS]   = REG_FIELD(RX8111_REG_EXT, 2, 2),
+	[RX8111_REGF_WADA]  = REG_FIELD(RX8111_REG_EXT, 3, 3),
+	[RX8111_REGF_TE]    = REG_FIELD(RX8111_REG_EXT, 4, 4),
+	[RX8111_REGF_USEL]  = REG_FIELD(RX8111_REG_EXT, 5, 5),
+	[RX8111_REGF_FSEL0] = REG_FIELD(RX8111_REG_EXT, 6, 6),
+	[RX8111_REGF_FSEL1] = REG_FIELD(RX8111_REG_EXT, 7, 7),
+
+	[RX8111_REGF_XST] = REG_FIELD(RX8111_REG_FLAG, 0, 0),
+	[RX8111_REGF_VLF] = REG_FIELD(RX8111_REG_FLAG, 1, 1),
+	[RX8111_REGF_EVF] = REG_FIELD(RX8111_REG_FLAG, 2, 2),
+	[RX8111_REGF_AF]  = REG_FIELD(RX8111_REG_FLAG, 3, 3),
+	[RX8111_REGF_TF]  = REG_FIELD(RX8111_REG_FLAG, 4, 4),
+	[RX8111_REGF_UF]  = REG_FIELD(RX8111_REG_FLAG, 5, 5),
+	[RX8111_REGF_POR] = REG_FIELD(RX8111_REG_FLAG, 7, 7),
+
+	[RX8111_REGF_STOP] = REG_FIELD(RX8111_REG_CTRL, 0, 0),
+	[RX8111_REGF_EIE]  = REG_FIELD(RX8111_REG_CTRL, 2, 2),
+	[RX8111_REGF_AIE]  = REG_FIELD(RX8111_REG_CTRL, 3, 3),
+	[RX8111_REGF_TIE]  = REG_FIELD(RX8111_REG_CTRL, 4, 4),
+	[RX8111_REGF_UIE]  = REG_FIELD(RX8111_REG_CTRL, 5, 5),
+
+	[RX8111_REGF_SMPT0]  = REG_FIELD(RX8111_REG_PWR_SWITCH_CTRL, 0, 0),
+	[RX8111_REGF_SMPT1]  = REG_FIELD(RX8111_REG_PWR_SWITCH_CTRL, 1, 1),
+	[RX8111_REGF_SWSEL0] = REG_FIELD(RX8111_REG_PWR_SWITCH_CTRL, 2, 2),
+	[RX8111_REGF_SWSEL1] = REG_FIELD(RX8111_REG_PWR_SWITCH_CTRL, 3, 3),
+	[RX8111_REGF_INIEN]  = REG_FIELD(RX8111_REG_PWR_SWITCH_CTRL, 6, 6),
+	[RX8111_REGF_CHGEN]  = REG_FIELD(RX8111_REG_PWR_SWITCH_CTRL, 7, 7),
+
+	[RX8111_REGF_VLOW]  = REG_FIELD(RX8111_REG_STATUS_MON, 1, 1),
+};
+
+static const struct regmap_config rx8111_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = RX8111_REG_TS_CTRL3,
+};
+
+struct rx8111_data {
+	struct regmap *regmap;
+	struct regmap_field *regfields[RX8111_REGF_MAX];
+	struct device *dev;
+	struct rtc_device *rtc;
+};
+
+static int rx8111_read_vl_flag(struct rx8111_data *data, unsigned int *vlval)
+{
+	int ret;
+
+	ret = regmap_field_read(data->regfields[RX8111_REGF_VLF], vlval);
+	if (ret)
+		dev_dbg(data->dev, "Could not read VL flag (%d)", ret);
+
+	return ret;
+}
+
+static int rx8111_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rx8111_data *data = dev_get_drvdata(dev);
+	u8 buf[RX8111_TIME_BUF_SZ];
+	unsigned int regval;
+	int ret;
+
+	/* Check status. */
+	ret = regmap_read(data->regmap, RX8111_REG_FLAG, &regval);
+	if (ret) {
+		dev_dbg(data->dev, "Could not read flag register (%d)\n", ret);
+		return ret;
+	}
+
+	if (FIELD_GET(RX8111_FLAG_XST_BIT, regval)) {
+		dev_dbg(data->dev,
+			"Crystal oscillation stopped, time is not reliable\n");
+		return -EINVAL;
+	}
+
+	if (FIELD_GET(RX8111_FLAG_VLF_BIT, regval)) {
+		dev_dbg(data->dev,
+			"Low voltage detected, time is not reliable\n");
+		return -EINVAL;
+	}
+
+	ret = regmap_field_read(data->regfields[RX8111_REGF_STOP], &regval);
+	if (ret) {
+		dev_dbg(data->dev, "Could not read clock status (%d)\n", ret);
+		return ret;
+	}
+
+	if (regval) {
+		dev_dbg(data->dev, "Clock stopped, time is not reliable\n");
+		return -EINVAL;
+	}
+
+	/* Read time. */
+	ret = regmap_bulk_read(data->regmap, RX8111_REG_SEC, buf,
+			       ARRAY_SIZE(buf));
+	if (ret) {
+		dev_dbg(data->dev, "Could not bulk read time (%d)\n", ret);
+		return ret;
+	}
+
+	tm->tm_sec = bcd2bin(buf[0]);
+	tm->tm_min = bcd2bin(buf[1]);
+	tm->tm_hour = bcd2bin(buf[2]);
+	tm->tm_wday = ffs(buf[3]) - 1;
+	tm->tm_mday = bcd2bin(buf[4]);
+	tm->tm_mon = bcd2bin(buf[5]) - 1;
+	tm->tm_year = bcd2bin(buf[6]) + 100;
+
+	return 0;
+}
+
+static int rx8111_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rx8111_data *data = dev_get_drvdata(dev);
+	u8 buf[RX8111_TIME_BUF_SZ];
+	int ret;
+
+	buf[0] = bin2bcd(tm->tm_sec);
+	buf[1] = bin2bcd(tm->tm_min);
+	buf[2] = bin2bcd(tm->tm_hour);
+	buf[3] = BIT(tm->tm_wday);
+	buf[4] = bin2bcd(tm->tm_mday);
+	buf[5] = bin2bcd(tm->tm_mon + 1);
+	buf[6] = bin2bcd(tm->tm_year - 100);
+
+	ret = regmap_clear_bits(data->regmap, RX8111_REG_FLAG,
+				RX8111_FLAG_XST_BIT | RX8111_FLAG_VLF_BIT);
+	if (ret)
+		return ret;
+
+	/* Stop the clock. */
+	ret = regmap_field_write(data->regfields[RX8111_REGF_STOP], 1);
+	if (ret) {
+		dev_dbg(data->dev, "Could not stop the clock (%d)\n", ret);
+		return ret;
+	}
+
+	/* Set the time. */
+	ret = regmap_bulk_write(data->regmap, RX8111_REG_SEC, buf,
+				ARRAY_SIZE(buf));
+	if (ret) {
+		dev_dbg(data->dev, "Could not bulk write time (%d)\n", ret);
+
+		/*
+		 * We don't bother with trying to start the clock again. We
+		 * check for this in rx8111_read_time() (and thus force user to
+		 * call rx8111_set_time() to try again).
+		 */
+		return ret;
+	}
+
+	/* Start the clock. */
+	ret = regmap_field_write(data->regfields[RX8111_REGF_STOP], 0);
+	if (ret) {
+		dev_dbg(data->dev, "Could not start the clock (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rx8111_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+{
+	struct rx8111_data *data = dev_get_drvdata(dev);
+	unsigned int regval;
+	unsigned int vlval;
+	int ret;
+
+	switch (cmd) {
+	case RTC_VL_READ:
+		ret = rx8111_read_vl_flag(data, &regval);
+		if (ret)
+			return ret;
+
+		vlval = regval ? RTC_VL_DATA_INVALID : 0;
+
+		ret = regmap_field_read(data->regfields[RX8111_REGF_VLOW],
+					&regval);
+		if (ret)
+			return ret;
+
+		vlval |= regval ? RTC_VL_BACKUP_LOW : 0;
+
+		return put_user(vlval, (typeof(vlval) __user *)arg);
+	default:
+		return -ENOIOCTLCMD;
+	}
+}
+
+static const struct rtc_class_ops rx8111_rtc_ops = {
+	.read_time = rx8111_read_time,
+	.set_time = rx8111_set_time,
+	.ioctl = rx8111_ioctl,
+};
+
+static int rx8111_probe(struct i2c_client *client)
+{
+	struct rx8111_data *data;
+	struct rtc_device *rtc;
+	size_t i;
+
+	data = devm_kmalloc(&client->dev, sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		dev_dbg(&client->dev, "Could not allocate device data\n");
+		return -ENOMEM;
+	}
+
+	data->dev = &client->dev;
+	dev_set_drvdata(data->dev, data);
+
+	data->regmap = devm_regmap_init_i2c(client, &rx8111_regmap_config);
+	if (IS_ERR(data->regmap)) {
+		dev_dbg(data->dev, "Could not initialize regmap\n");
+		return PTR_ERR(data->regmap);
+	}
+
+	for (i = 0; i < RX8111_REGF_MAX; ++i) {
+		data->regfields[i] = devm_regmap_field_alloc(
+			data->dev, data->regmap, rx8111_regfields[i]);
+		if (IS_ERR(data->regfields[i])) {
+			dev_dbg(data->dev,
+				"Could not allocate register field %zu\n", i);
+			return PTR_ERR(data->regfields[i]);
+		}
+	}
+
+	rtc = devm_rtc_allocate_device(data->dev);
+	if (IS_ERR(rtc)) {
+		dev_dbg(data->dev, "Could not allocate rtc device\n");
+		return PTR_ERR(rtc);
+	}
+
+	rtc->ops = &rx8111_rtc_ops;
+	rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
+	rtc->range_max = RTC_TIMESTAMP_END_2099;
+
+	clear_bit(RTC_FEATURE_ALARM, rtc->features);
+
+	return devm_rtc_register_device(rtc);
+}
+
+static const struct of_device_id rx8111_of_match[] = {
+	{
+		.compatible = "epson,rx8111",
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, rx8111_of_match);
+
+static struct i2c_driver rx8111_driver = {
+	.driver = {
+		.name = "rtc-rx8111",
+		.of_match_table = rx8111_of_match,
+	},
+	.probe = rx8111_probe,
+};
+module_i2c_driver(rx8111_driver);
+
+MODULE_AUTHOR("Waqar Hameed <waqar.hameed@axis.com>");
+MODULE_DESCRIPTION("Epson RX8111 RTC driver");
+MODULE_LICENSE("GPL");